ECE-Certified Amber Round Reflectors in a Twin Pack Low Profile, Screw Mount, Ready to Fit Product Overview The LED Autolamps 66A is an ECE-certified amber round reflector sold in a twin blister pack, designed for use on trailers, caravans, and commercial vehicles where reflector compliance and visibility are required. Unlike active lighting, reflectors are passive safety devices that retroreflect light from following vehicles back toward the source no wiring, no power supply required. The 66A features a low-profile design and simple screw mounting, making it straightforward to fit to trailer frames, sidewalls, or body panels without specialist tools. The amber colour designates its use as a side reflector in typical Australian and international trailer lighting configurations. ECE certification confirms the 66A meets the relevant international lighting regulation standards for retroreflecting devices. Backed by LED Autolamps' 5-year warranty and sold as a twin pack. Features & Benefits ECE certified — meets international regulatory standards for retroreflecting devices; suitable for use on trailers and vehicles where ECE-compliant reflectors are required Amber colour — the correct designation for side reflectors on trailers and caravans, distinguishing them from rear red reflectors and front white/amber reflectors Twin blister pack — two reflectors per purchase; suits side-mounted installations where one reflector is fitted to each side of the trailer Low-profile design — sits close to the mounting surface for a neat, unobtrusive appearance on trailer bodies and caravan walls Screw mount — simple, secure mechanical fixing with no adhesive or clips required; suitable for metal and composite panel mounting No wiring required — passive retroreflective device; functions purely by reflecting light, with no electrical connection needed 5-year warranty — LED Autolamps' standard warranty applied to this reflector Technical Specs Specification Detail SKU 66A Colour Amber Shape Round Certification ECE Mount type Screw mount Profile Low profile Pack quantity 2 (twin blister pack) Wiring required No Warranty 5 years Dimensions Not specified — confirm with supplier or product packaging Compatible With / Goes Well With Trailers and caravans requiring ECE-compliant side reflectors Trailer frames, sidewalls, and body panels suited to screw mounting Pairs with LED Autolamps trailer lamp and wiring harness range for a complete trailer lighting solution Weight Not specified Frequently Asked Questions What does ECE certification mean for a reflector? ECE certification indicates the reflector meets the relevant Economic Commission for Europe standards for retroreflecting devices on motor vehicles and trailers — covering retroreflective performance, colour accuracy, and construction requirements. How many reflectors are included in the pack? Two — the 66A is sold as a twin blister pack, which suits side-mounted trailer applications where one reflector is needed per side. Does this reflector require any wiring? No — it is a passive retroreflective device that works by reflecting light from other vehicles back toward the source. No electrical connection or wiring is required. Why amber and not red or white? Amber reflectors are used on the sides of trailers and caravans. Red reflectors are designated for the rear, and white/amber for the front. The 66A's amber colour makes it the correct choice for side reflector positions. Are the mounting dimensions or hole specs available? Specific dimensions are not included in the supplier data for this product. Check the product packaging on arrival or contact LED Autolamps directly to confirm the mounting hole diameter and overall reflector size before drilling. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Boat Trailer Lamp Twin Pack with 10m Cable Diffused Tail, Licence Plate, Reflex Reflector, IP67 Product Overview The LED Autolamps 215ARLP2-10M is the 10-metre cable variant of the 215ARLP2 the same boat trailer lamp twin pack with diffused tail, integrated licence plate lamp, and inbuilt reflex reflector, supplied with a 10m cable for longer trailer installations where standard cable lengths are insufficient. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits 10m cable — extended cable length for longer boat trailers and applications where the standard 40cm lead is insufficient Diffused tail function — smooth, even tail light output for a premium clean appearance Integrated licence plate lamp — built-in number plate illumination eliminates a separate fitting Inbuilt reflex reflector — integrated passive reflector for additional rear visibility and compliance Twin pack — both lamps supplied for a complete left and right installation ADR approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 215ARLP2-10M Pack Contents 2 lamps + 10m cables Lamp Type Stop / Tail / Indicator / Licence Plate / Reflector Tail Function Diffused Voltage 12V Cable Length 10m Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Longer boat trailers and trailer setups requiring extended cable runs for rear lamp connection 12V trailer electrical systems LED Autolamps 215ARLP2 (same lamps, 40cm cable) LED Autolamps 216ARLP2 (same boat trailer lamp concept — confirm dimensional compatibility) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How does the 215ARLP2-10M differ from the 215ARLP2? The 215ARLP2-10M includes a 10m cable for longer trailer runs, while the 215ARLP2 has a 40cm cable. Both contain the same boat trailer lamp with diffused tail, integrated licence plate, and reflex reflector — the only difference is the cable length. Why would I need a 10m cable? Longer boat trailers, car-and-boat combinations, or setups where cable routing adds significant distance between the trailer plug and rear lamps can require extended cable to avoid spliced joins — the 10m cable provides a clean, uninterrupted run for these applications. Is the 215ARLP2-10M suitable for submersible boat trailer use? The 215ARLP2-10M is IP67 rated, covering water immersion up to 1 metre for 30 minutes — suitable for standard boat trailer launching. For trailers regularly submerged for extended periods, the IP68-rated Bulletproof Series is a more appropriate option. Is the 215ARLP2-10M compatible with 24V systems? No. It is a 12V-only lamp and is not rated for 24V applications. What warranty does the 215ARLP2-10M carry? The 215ARLP2-10M is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Compact LED Licence Plate Light ECE Approved, IP67, 12V or 24V, Two Required for ADR Compliance. Product Overview The LED Autolamps 60BLMB is a compact LED licence plate light designed for trailers, caravans, trucks, and commercial vehicles requiring ECE-approved licence plate illumination. Measuring just 60mm x 22mm x 22mm, this revolutionary low-profile design saves significant installation time compared to traditional licence plate lamp housings. Important compliance note: two lights are required for ADR compliance this is a single unit, and a matching pair must be installed to meet Australian Design Rule requirements for licence plate illumination. ECE approved (E9 L00 1066), IP67 rated, and operating on both 12V and 24V systems with an ultra-low 0.04A current draw, the 60BLMB is supplied with a 0.1m (10cm) cable. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Licence plate light Dimensions: 60mm x 22mm x 22mm Mounting centre-to-centre: 22mm Cable length: 0.1m (10cm) Current draw: 0.04A @ 13.8V IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE E9 L00 1066 Warranty: 5 years Important: Two lights required for ADR compliance sold as single unit Brand: LED Autolamps SKU: 60BLMB Features & Benefits Revolutionary compact design: Ultra-compact 60mm x 22mm x 22mm footprint saves significant time on installation compared to traditional licence plate lamp housings ECE approved: Certified under ECE E9 L00 1066 for legal compliance as a licence plate light Ultra-low current draw: Just 0.04A at 13.8V, placing minimal load on the vehicle's electrical system IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 60BLMB Brand LED Autolamps Function Licence Plate Light Dimensions 60mm x 22mm x 22mm Mounting Centre-to-Centre 22mm Cable Length 0.1m (10cm) Current Draw 0.04A @ 13.8V IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ECE E9 L00 1066 Warranty 5 Years Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ECE-approved licence plate illumination including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions How many of these lights do I need? Two lights are required for ADR compliance. This listing is for a single unit purchase two to meet Australian legal requirements for licence plate illumination. Is this lamp ECE approved? Yes the 60BLMB is approved under ECE E9 L00 1066 for licence plate light compliance. What is the current draw of this lamp? Just 0.04A at 13.8V an extremely low electrical load, ideal for installations with multiple lamps on the same circuit. What cable length is supplied? A 0.1m (10cm) cable is included. Confirm this is sufficient for your specific installation, or plan for a cable extension if required. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm you are purchasing the correct quantity (two units) for ADR compliance before ordering. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Boat Trailer Lamp Twin Pack Diffused Tail, Licence Plate, Reflex Reflector, IP67 Product Overview The LED Autolamps 215ARLP2 is a 12V rear combination lamp twin pack designed for boat trailer applications, covering stop, tail, indicator, licence plate, and integrated reflex reflector functions in a black housing with a 40cm cable lead. The diffused tail function delivers a smooth, even tail light appearance, and the integrated licence plate lamp and reflex reflector eliminate the need for separate fittings. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Designed for boat trailers — purpose-built for the submersion, corrosion, and UV exposure demands of marine-adjacent applications Diffused tail function — smooth, even tail light output for a premium clean appearance Integrated licence plate lamp — built-in number plate illumination eliminates a separate fitting Inbuilt reflex reflector — integrated passive reflector for additional rear visibility and compliance Twin pack with 40cm cables — both lamps with pre-wired leads for a complete left and right installation Black housing — clean finish suits a wide range of trailer aesthetics ADR approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 215ARLP2 Pack Contents 2 lamps + 40cm cables Lamp Type Stop / Tail / Indicator / Licence Plate / Reflector Tail Function Diffused Voltage 12V Housing Colour Black Cable Length 400mm Protection Rating IP67 Compliance ADR Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Boat trailers requiring ADR-approved rear combination lighting with licence plate and reflex reflector 12V trailer electrical systems LED Autolamps 216ARLP2 boat trailer lamp (same concept, confirm dimensions and compatibility with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 215ARLP2 approved for road use in Australia? Yes. The 215ARLP2 is ADR approved, meeting Australian Design Rules requirements for legal on-road use across stop, tail, indicator, and licence plate functions. What does the diffused tail function mean? Rather than showing individual LED points through the lens, the diffused tail produces a smooth, even spread of light across the tail lamp face — a cleaner, more premium appearance than point-source LED tail lamps. How does the 215ARLP2 differ from the 216ARLP2? Both are boat trailer combination lamp twin packs with diffused tail and integrated licence plate. Confirm the specific dimensional differences and fitment compatibility between the 215 and 216 series with F.A.E. before ordering. Is the 215ARLP2 suitable for submersible boat trailer use? The 215ARLP2 is IP67 rated, covering water immersion up to 1 metre for 30 minutes — suitable for standard boat trailer launching. For trailers regularly submerged for extended periods, IP68-rated options such as the 210BARLP2 Bulletproof Series may be more appropriate. What warranty does the 215ARLP2 carry? The 215ARLP2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

IP67-Rated 1m Gooseneck Trailer Connector with 7-Pin Large Round Plug Built Tough for Aussie Towing Conditions Product Overview The LED Autolamps 5C81B is a 1-metre trailer connector cable that links a gooseneck trailer lamp assembly to the tow vehicle via a 7-pin large round plug. Designed as part of the LED Autolamps small harness system, it provides the vehicle-end connection point for the gooseneck wiring setup with a fully rated IP67 seal meaning it's protected against both dust ingress and temporary water immersion, well beyond the demands of typical road use. Constructed with tinned copper wiring for long-term corrosion resistance and terminated with a 7-pin large round plug (the heavy-duty round-shell format found on many older Australian tow vehicles and some commercial and agricultural rigs), the 5C81B is a straightforward, no-compromise connector backed by LED Autolamps' 5-year warranty. Features & Benefits IP67 rated — fully sealed against dust and protected against temporary immersion up to 1 metre; handles road spray, creek crossings, and boat ramp conditions without degrading the connection 7-pin large round plug — suits vehicles and trailers fitted with the large round socket format; distinct from the 7-pin flat plug common on most modern passenger vehicles and utes 1 metre cable length — provides enough reach between the gooseneck lamp system and the vehicle socket without excess slack Tinned copper wiring — corrosion-resistant conductors maintain reliable conductivity over time in the salt, moisture, and heat typical of Australian trailer use Part of the LED Autolamps small harness system — designed to integrate cleanly with the broader LED Autolamps gooseneck trailer wiring range 5-year warranty — LED Autolamps' standard warranty coverage on this connector Technical Specs Specification Detail SKU 5C81B Type Trailer connector cable Cable length 1 metre Plug type 7-pin large round IP rating IP67 Conductor material Tinned copper System compatibility LED Autolamps small harness system Warranty 5 years Compatible With / Goes Well With Vehicles fitted with a 7-pin large round trailer socket LED Autolamps gooseneck trailer lamp assemblies LED Autolamps small harness system components (e.g. 5C550C) Not compatible with 7-pin flat trailer socket formats — confirm your vehicle's socket type before purchasing Weight Not specified Frequently Asked Questions What is the difference between a 7-pin large round and a 7-pin flat plug? The 7-pin large round uses a circular housing with a locking ring, commonly found on older Australian tow vehicles, agricultural machinery, and some commercial rigs. The 7-pin flat is the most common modern format on passenger vehicles and utes. This connector suits the large round format only. Does this cable connect to the vehicle or the trailer lamp? It connects the gooseneck trailer lamp wiring to the tow vehicle — the 7-pin large round plug inserts into the vehicle's trailer socket, while the other end ties into the LED Autolamps gooseneck harness. What does IP67 mean for a trailer connector? IP67 means the connector is fully sealed against dust (rated 6) and can withstand temporary immersion in water up to 1 metre deep (rated 7) — making it suitable for boat ramp use, creek crossings, and heavy road spray without compromising the connection. What is the LED Autolamps small harness system? It's LED Autolamps' modular trailer wiring range for smaller trailer setups. The 5C81B is the vehicle-end connector in that system, designed to work alongside other compatible LED Autolamps gooseneck wiring components such as the 5C550C cable. Is a 1 metre cable long enough for most setups? For typical gooseneck lamp configurations the 1 metre length provides sufficient reach between the trailer socket and the lamp harness connection point. If additional length is needed, other LED Autolamps extension cables may be available. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Main Run Cable of the LED Autolamps Trailer Harness System 6.7 Metres, Waterproof, Tool-Free Product Overview The LED Autolamps 5C670C is a 6.7-metre 5-core lamp-to-lamp cable that forms the primary wiring trunk of the LED Autolamps trailer harness system, running the lighting signal between lamps along the trailer's body. Unlike the short 5C550C stub cable used for gooseneck lamp connections, the 5C670C is the long-run cable designed to carry all five lighting signals tail/marker, LHS indicator, RHS indicator, brake/stop, and earth, the full length of the trailer from lamp to lamp. Suited to trailers from 3.7 to 12 metres, the 5C670C uses 100% waterproof plugs and tinned copper conductors throughout, with accessory wires for connecting 2-core marker and licence plate cables along the run. No assembly tools are required, and the system is designed to cut installation time by up to 70% compared to traditional wiring methods. Backed by a 5-year warranty. Features & Benefits 6.7 metre length — provides the main wiring run between lamps on trailers up to 12 metres; longer than the 5C550C stub cable, which is designed for short gooseneck lamp connections only 5-core configuration — five conductors carry all standard trailer lighting signals: tail/marker, LHS indicator, RHS indicator, brake/stop, and earth; a single cable covers the complete lighting circuit 100% waterproof plugs and cables — sealed against road spray, rain, and submersion throughout the full cable run; critical for boat trailers and agricultural trailers regularly exposed to water Tinned copper wiring — corrosion-resistant conductors maintain reliable conductivity over time in the salt and moisture environments typical of Australian trailer use Accessory wires for 2C marker and licence plate cables — built-in branch provision allows 2-core marker lights and licence plate lights to be tapped off the main run without separate wiring loops No assembly tools required — plug-and-connect installation saves up to 70% of wiring time compared to traditional trailer harness methods Suits trailers 3.7m to 12m — covers the full range of Australian light trailers, caravan setups, and boat trailers within the LED Autolamps small harness system 5-year warranty — LED Autolamps' standard warranty applied to this cable Technical Specs Specification Detail SKU 5C670C Type Wiring harness / lamp-to-lamp cable Core count 5 core Cable length 6.7 metres Application Lamp-to-lamp main run Trailer length range 3.7m to 12m Plugs 100% waterproof Conductor material Tinned copper Assembly tools required No Pack quantity Not specified Weight 0.42kg Warranty 5 years Compatible With / Goes Well With LED Autolamps trailer lamp and harness system components Trailers from 3.7m to 12m in length LED Autolamps 5C550C gooseneck stub cables (short lamp connection) LED Autolamps 5C81B vehicle connector cables (car-end connection) LED Autolamps 2-core marker and licence plate cable accessories Weight 0.42kg Frequently Asked Questions How is this cable different from the LED Autolamps 5C550C? The 5C670C is the 6.7-metre main run cable that carries the wiring signal between lamps along the trailer body. The 5C550C is a short 550mm stub cable specifically for gooseneck lamp connections. Both are 5-core and waterproof but serve different roles within the LED Autolamps harness system. What role does this cable play in a trailer wiring setup? The 5C670C is the trunk cable — it runs the full length of the trailer, connecting lamps along the run and distributing all five trailer lighting signals from one end to the other. Short stub cables (like the 5C550C) then branch off to connect individual gooseneck lamps. How much cable do I need for my trailer? At 6.7 metres, this cable suits the lamp-to-lamp run on most trailers up to 12 metres in total length. The number of cables required depends on your trailer's lamp positions and configuration. How many cables are included per pack? The supplier lists this as a "Pack" but does not specify the quantity included. What are the 2C accessory wires used for? The 2C accessory wires allow 2-core marker lights and licence plate lights to be connected directly off the main 5-core run without running separate wiring loops to each fixture — saving time and keeping the wiring neat. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Boat Trailer Lamp Twin Pack with 10m Cable Diffused Tail, Licence Plate, IP67 Product Overview The LED Autolamps 216ARLP2-10M is the 10-metre cable variant of the 216ARLP2 the same 12V boat trailer combination lamp twin pack with diffused tail and integrated licence plate lamp, supplied with a 10m cable for longer trailer installations where the standard 40cm lead is insufficient. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits 10m cable — extended cable for longer boat trailers and setups where standard cable lengths are insufficient Diffused tail function — smooth, even tail light output for a premium appearance Integrated licence plate lamp — built-in number plate illumination in each lamp unit Twin pack — both lamps supplied for a complete left and right rear installation ADR approved — meets Australian Design Rules for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 216ARLP2-10M Pack Contents 2 lamps + 10m cables Lamp Type Stop / Tail / Indicator / Licence Plate Tail Function Diffused Voltage 12V Cable Length 10m Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Longer boat trailers requiring extended cable runs for rear lamp connection 12V trailer electrical systems LED Autolamps 216ARLP2 (same lamps, 40cm cable, retail blister pack) LED Autolamps 216ARLP2B (same lamps, 40cm cable, bulk packaging) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How does the 216ARLP2-10M differ from the 216ARLP2? The 216ARLP2-10M includes a 10m cable for longer trailer runs, while the 216ARLP2 has a 40cm cable. Both contain the same boat trailer combination lamp with diffused tail and integrated licence plate. Why would I need a 10m cable? Extended cable is useful for longer boat trailers where routing from the trailer plug to the rear lamps adds significant distance — the 10m cable eliminates the need for spliced extensions that can corrode in marine environments. Is the 216ARLP2-10M suitable for submersible boat trailer use? The 216ARLP2-10M is IP67 rated — suitable for standard boat trailer launching up to 1 metre for 30 minutes. For trailers regularly submerged for extended periods, the IP68-rated Bulletproof Series provides a higher level of protection. Is the 216ARLP2-10M compatible with 24V systems? No. It is a 12V-only lamp and is not rated for 24V applications. What warranty does the 216ARLP2-10M carry? The 216ARLP2-10M is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Boat Trailer Lamp Twin Pack Diffused Tail, Licence Plate, 40cm Cable, Bulk Packaging Product Overview The LED Autolamps 216ARLP2B is the bulk packaging variant of the 216ARLP2 the same 12V boat trailer combination lamp twin pack with diffused tail and integrated licence plate lamp, with a 40cm cable lead, packaged in bulk rather than a retail blister pack for trade and installer purchasing. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Diffused tail function — smooth, even tail light output for a premium appearance on boat trailer builds Integrated licence plate lamp — built-in number plate illumination eliminates a separate fitting Twin pack with 40cm cables — both lamps with pre-wired leads for a complete left and right installation Bulk packaging — trade and installer packaging without retail blister ADR approved — meets Australian Design Rules for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 216ARLP2B Pack Contents 2 lamps + 40cm cables Lamp Type Stop / Tail / Indicator / Licence Plate Tail Function Diffused Voltage 12V Cable Length 400mm Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Boat trailers and trailer applications requiring ADR-approved rear combination lighting with licence plate 12V trailer electrical systems LED Autolamps 216ARLP2 (same lamps, retail blister pack) LED Autolamps 215ARLP2 and 215ARLP2B (same boat trailer lamp concept — confirm dimensional compatibility) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How does the 216ARLP2B differ from the 216ARLP2? Both contain the same boat trailer lamp twin pack with 40cm cables. The 216ARLP2B comes in bulk packaging for trade and installer purchasing, while the 216ARLP2 comes in a retail blister pack. Is the 216ARLP2B suitable for submersible boat trailer use? The 216ARLP2B is IP67 rated — suitable for standard boat trailer launching up to 1 metre for 30 minutes. For trailers regularly submerged for extended periods, the IP68 Bulletproof Series provides a higher protection level. What does the diffused tail function mean? Rather than showing individual LED points through the lens, the diffused tail produces a smooth, even spread of light across the tail lamp face — a cleaner, more premium appearance than point-source LED tail lamps. Is the 216ARLP2B compatible with 24V systems? No. It is a 12V-only lamp and is not rated for 24V applications. What warranty does the 216ARLP2B carry? The 216ARLP2B is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

4.9m Trailer Lamp to Gooseneck Wiring Harness 5-Year Warranty Product Overview The LED Autolamps 5C490C is a 4.9-metre trailer wiring harness connecting the lamp assembly to the gooseneck, designed for trailer installations requiring a longer cable run than the 5C370C (3.7m). Suited to larger trailers where the additional cable length is required between the gooseneck connection and the rear lamp assembly. Backed by a 5-year warranty. Features & Benefits 4.9m cable length — longer cable run than the 5C370C for trailers requiring additional reach from gooseneck to rear lamps Pre-built harness — ready to install without cutting or assembly 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 5C490C Type Trailer Wiring Harness Cable Length 4.9m Packaging Box Warranty 5 years Weight 0.3 kg Compatible With / Goes Well With LED Autolamps trailer lamp assemblies and combination lamp series Larger trailers requiring a longer gooseneck to rear lamp cable run LED Autolamps 5C370C (3.7m variant for shorter trailer applications) Frequently Asked Questions How does the 5C490C differ from the 5C370C? The 5C490C has a 4.9m cable versus the 5C370C's 3.7m — suited to larger trailers where the additional 1.2m of reach is needed from the gooseneck connection to the rear lamps. What types of trailers is the 5C490C designed for? The 5C490C suits trailers where the gooseneck-to-rear-lamp run exceeds 3.7m — confirm the required cable length against your trailer dimensions before ordering. What connector and pin specification does the 5C490C use? Connector and pin specification were not confirmed in available supplier data — confirm compatibility with your trailer wiring before ordering. Does the 5C490C include accessory wires for markers and licence plates? Accessory wire inclusions were not confirmed in available supplier data — confirm with LED Autolamps before ordering. What warranty does the 5C490C carry? The 5C490C is backed by a 5-year warranty from LED Autolamps. Weight 0.3 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

7 Pin Flat Trailer Connector Plug with Accessory Wire 1 Metre Cable, IP67, Tinned Copper. Product Overview The LED Autolamps 5C41 is a 7 pin flat male trailer connector plug with a 1 metre cable and an additional accessory wire, designed to suit small trailer harness systems. Used to connect the vehicle's 7 pin flat trailer socket to a small trailer's lighting harness, the 5C41 provides a reliable, weatherproof connection point with tinned copper wiring for superior corrosion resistance compared to standard bare copper conductors. IP67 rated for complete weatherproof protection, the 5C41 is a practical wiring solution for small trailer builds, box trailer conversions, and harness repairs. The included accessory wire provides an additional circuit connection beyond the standard lighting functions. Backed by LED Autolamps' 5-year warranty. Key Specifications Connector type: 7 pin flat male plug Cable length: 1 metre Additional feature: Accessory wire included Wire type: Tinned copper IP rating: IP67 Application: Small trailer harness systems Warranty: 5 years Weight: 0.112kg Packaging: Box Brand: LED Autolamps SKU: 5C41 Features & Benefits 7 pin flat trailer plug: Standard 7 pin flat connector design suits the vast majority of Australian vehicle trailer sockets 1 metre cable: Sufficient length for most small trailer wiring connections from the plug to the trailer's main harness junction Accessory wire included: Provides an additional circuit connection beyond the standard lighting functions useful for auxiliary 12V accessories on the trailer Tinned copper wiring: Tinned copper conductors resist corrosion significantly better than bare copper, extending the working life of the connection in damp or coastal environments IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion Suits small harness systems: Purpose-built for small trailer wiring applications including box trailers and light camper trailers 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 5C41 Brand LED Autolamps Connector Type 7 Pin Flat Male Plug Cable Length 1 metre Accessory Wire Included Wire Type Tinned Copper IP Rating IP67 Application Small trailer harness systems Warranty 5 Years Weight 0.112kg Packaging Box Compatible With Suits small trailer harness systems requiring a 7 pin flat connector including: Box trailers and light trailers Camper trailers with small wiring harnesses New trailer builds requiring a vehicle-end connector Trailer wiring repairs and harness upgrades Frequently Asked Questions Is this a 5 pin or 7 pin connector? This is a 7 pin flat connector. Some retailer product titles incorrectly list it as "5 Pin Male Plug" this is a confirmed naming error in the supplier's database. The product features and multiple independent retailers confirm it is a 7 pin flat trailer plug. What is the accessory wire used for? The accessory wire provides an additional circuit connection beyond the standard trailer lighting functions (stop, tail, indicator, reverse) useful for powering auxiliary 12V accessories on the trailer such as interior lights or charging circuits. How long is the cable? The 5C41 includes a 1 metre cable from the plug to the connection point. Why use tinned copper wire instead of standard copper? Tinned copper wiring has a protective tin coating that significantly improves corrosion resistance compared to bare copper particularly important in trailer wiring exposed to moisture, road spray, and coastal conditions. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Confirm your vehicle and trailer use a 7 pin flat connector system before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Caravan Awning Lamp 18 LEDs, 80 Lux @ 1m, 3000K Warm White, 260mm Black, 20cm Cable Product Overview The LED Autolamps 23260BLKB is a variant of the 23260BLK awning lamp, supplying the same 260mm black 12/24V caravan awning lamp with 18 LEDs, 3000K warm white output, and 80 lux at 1 metre with a 20cm pre-wired cable lead for installation flexibility. The warm white 60° spread is well suited to evening outdoor living and entertaining beneath the caravan awning. Backed by a 3-year warranty. Features & Benefits 18 LEDs producing 80 lux @ 1m — practical, measured output for effective awning and outdoor area illumination 3000K warm white — warm, inviting colour temperature ideal for outdoor entertaining 60° light spread — focused downward spread illuminates the area beneath the awning without excessive glare 20cm pre-wired cable — cable lead for flexible installation routing on awning rails and caravan body panels 260mm compact length — suits standard caravan awning rail mounting Black housing — clean finish matches modern caravan exterior aesthetics Low current draw — designed for efficient operation from 12V caravan battery systems 2-screw mount — straightforward installation on awning rail or caravan body panels 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 23260BLKB Lamp Type Awning Light LED Quantity 18 Colour Temperature 3000K Warm White Illuminance 80 lux @ 1m Beam Spread 60° Length 260mm Housing Colour Black Voltage 12V Cable Length 200mm Warranty 3 years Compatible With / Goes Well With Caravan awning rails and outdoor living areas 12V caravan battery systems LED Autolamps 23260BLK awning lamp (same lamp, 2-screw mount without pre-wired cable) LED Autolamps interior and exterior lighting accessories Frequently Asked Questions How does the 23260BLKB differ from the 23260BLK? Both are the same 260mm 18-LED 3000K awning lamp in a black housing. The 23260BLKB includes a 20cm pre-wired cable lead; confirm whether the 23260BLK is supplied with a cable or requires direct hard-wiring. What colour temperature does the 23260BLKB produce? It produces 3000K warm white — a soft, warm tone suited to outdoor entertaining and relaxed evening use beneath the awning. What is the beam spread on the 23260BLKB? The 60° spread focuses light in a downward arc beneath the awning, providing effective illumination without excessive upward glare. Does the 23260BLKB work on 24V systems? The features note the lamp as "12V or 24V" but the SKU title specifies 12V — confirm voltage compatibility with LED Autolamps before use on 24V systems. What warranty does the 23260BLKB carry? The 23260BLKB is backed by a 3-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

3.7m Trailer Lamp to Gooseneck Cable Tinned Copper, Waterproof, No Tools, Save 70% Installation Time Product Overview The LED Autolamps 5C370C is a 3.7-metre pre-built trailer cable connecting the lamp assembly to the gooseneck, designed to suit trailers from 3.7 to 12 metres. Constructed with tinned copper wiring and 100% waterproof plugs and cables, it requires no assembly tools significantly reducing wiring installation time. Accessory wires for 2-core marker and licence plate cables are included. Backed by a 5-year warranty. Features & Benefits 3.7m pre-built cable — suits trailers from 3.7m to 12m; ready to install with no cutting or assembly required Tinned copper wiring — superior corrosion resistance for marine and outdoor transport environments compared to bare copper 100% waterproof plugs and cables — fully sealed connections for reliable outdoor and wet environment performance No assembly tools required — plug-and-connect installation saves significant wiring time on the job Saves up to 70% installation time — dramatically reduces trailer wiring time versus DIY cable assembly Accessory wires included — 2-core marker and licence plate cable accessories included for a complete installation 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 5C370C Type Trailer Wiring Cable Cable Length 3.7m Conductor Tinned copper Connectors 100% waterproof Suitable Trailer Length 3.7m – 12m Accessory Wires 2-core marker / licence plate Warranty 5 years Weight 3 kg Compatible With / Goes Well With LED Autolamps trailer lamp assemblies and combination lamp series Trailers from 3.7m to 12m in length LED Autolamps marker and licence plate lamp accessories (compatible with 2-core accessory wires) Frequently Asked Questions What trailers is the 5C370C suited to? The 5C370C is designed for trailers from 3.7 to 12 metres in length — the 3.7m cable provides enough reach from the gooseneck connection to the rear lamps across this range. Why is tinned copper wiring preferred for trailer cables? Tinned copper wire has a protective tin coating over each copper strand, providing significantly better corrosion resistance than bare copper — particularly important for trailers exposed to water, road salt, and agricultural chemicals. What are the accessory wires used for? The included 2-core accessory wires connect additional marker and licence plate lamps to the main harness, avoiding the need for separate wiring runs to these fittings. Does the 5C370C require any tools to install? No. The plugs and connections are pre-built — installation requires no cutting, crimping, or assembly tools. What warranty does the 5C370C carry? The 5C370C is backed by a 5-year warranty from LED Autolamps. Weight 3 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less