12V Caravan Awning Lamp Silver Finish, 18 LEDs, 80 Lux @ 1m, 3000K Warm White, 260mm Product Overview The LED Autolamps 23260B is the silver housing variant of the 23260 series awning lamp, delivering the same 18-LED, 3000K warm white output at 80 lux at 1 metre and 60° spread as the 23260BLK in a silver finish suited to caravans and awning setups where a lighter housing colour is preferred. Supplied with a 20cm cable lead and backed by a 3-year warranty. Features & Benefits Silver housing — lighter finish suited to caravans and awning setups where silver or white trim is preferred over black 18 LEDs producing 80 lux @ 1m — practical, measured output for effective awning illumination 3000K warm white — warm, inviting colour temperature for outdoor entertaining 60° light spread — focused downward spread illuminates the area beneath the awning 20cm pre-wired cable — cable lead for flexible installation routing 260mm compact length — suits standard caravan awning rail mounting Low current draw — efficient operation from 12V caravan battery systems 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 23260B Lamp Type Awning Light LED Quantity 18 Colour Temperature 3000K Warm White Illuminance 80 lux @ 1m Beam Spread 60° Length 260mm Housing Colour Silver Voltage 12V Cable Length 200mm Warranty 3 years Compatible With / Goes Well With Caravan awning rails and outdoor living areas 12V caravan battery systems LED Autolamps 23260BLK and 23260BLKB (same lamp, black housing variants) LED Autolamps interior and exterior lighting accessories Frequently Asked Questions How does the 23260B differ from the 23260BLK? The 23260B has a silver housing with a 20cm cable, while the 23260BLK is the black housing variant. Both deliver the same 18-LED, 80 lux @ 1m, 3000K warm white output across the 260mm form factor. What colour temperature does the 23260B produce? It produces 3000K warm white — a soft, warm tone suited to evening outdoor entertaining beneath the caravan awning. What is the beam spread on the 23260B? The 60° spread focuses light downward beneath the awning, providing effective illumination without excessive upward glare. Does the 23260B work on 24V systems? The features note the lamp as "12V or 24V" but the title specifies 12V — confirm voltage compatibility with LED Autolamps before use on 24V systems. What warranty does the 23260B carry? The 23260B is backed by a 3-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V 443mm Caravan Awning Lamp Black Housing, 36 LEDs, 3000K Warm White, 60° Spread, IP67. Product Overview The LED Autolamps 23450BLKB is a 12V 443mm caravan awning lamp from the 23 Series the larger of the two available sizes, featuring 36 LEDs in a black aluminium housing with a 3000K warm white output and 60-degree light spread. The 23450BLKB measures 443mm x 23mm x 24mm and is finished in black. The lamp produces 240 effective lumens from 443mm of warm white LED output, supplied with a 20cm cable. Installation: remove end caps and fit onto flat surface with screws supplied, then refit end caps. The 3000K warm white output is ideal for outdoor caravan awning and living area lighting where a softer, more ambient tone is preferred over cool white. A silicon polycarbonate lens over durable aluminium housing ensures IP67 weatherproofing for exterior use. Backed by LED Autolamps' 3-year warranty. Key Specifications LED count: 36 Lumen output: 240 effective lumens (443mm) Colour temperature: 3000K warm white Housing: Black aluminium Dimensions: 443mm x 23mm x 24mm Light spread: 60-degree Cable: 20cm Current draw: 0.38A @ 13.8V Mount type: Surface mount remove end caps, screw fix, refit end caps IP rating: IP67 Input voltage: 12V only Warranty: 3 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 23450BLKB Features & Benefits 443mm length: The longer of the two 23 Series sizes, providing broad awning and outdoor area coverage the 260mm version is the 23260BLKB 36 LEDs: High LED count for consistent, warm white illumination across the full 443mm lamp body 3000K warm white: Warm, amber-toned light output ideal for outdoor living and awning lighting where a relaxed, ambient atmosphere is preferred 60-degree light spread: Focused 60-degree angle concentrates light downward for effective awning and outdoor area illumination without excessive scatter Black aluminium housing: Durable aluminium construction with a black finish suits modern caravans and motorhomes Silicon polycarbonate lens: Clear silicon lens for long-term UV resistance and weather protection IP67 weatherproof: Suitable for exterior awning use completely sealed against dust and temporary water immersion 20cm cable: Short fly-lead for connection to the switched power supply; an inline switch or switched circuit is required Surface mount with concealed screws: Remove end caps, screw fix, refit caps for a clean, professional finish 3-year warranty: Backed by LED Autolamps' 3-year warranty Technical Specs Specification Detail SKU 23450BLKB Brand LED Autolamps Series 23 Series LED Count 36 Effective Lumens 240lm Colour Temperature 3000K warm white Housing Black aluminium Dimensions 443mm x 23mm x 24mm Light Spread 60-degree Cable Length 20cm Current Draw 0.38A @ 13.8V Mount Type Surface mount remove end caps, screw fix, refit caps IP Rating IP67 Input Voltage 12V only Warranty 3 Years Packaging Blister Pack single unit Compatible With Suits 12V caravans, motorhomes, and outdoor living applications: Caravan and motorhome awning lighting Outdoor living area and deck lighting Marine cabin and exterior lighting Camper trailer awning and annex lighting Frequently Asked Questions Is this lamp 12V or 24V? The 23450BLKB is 12V only. For the 24V version, refer to the 23450BLK-24. Does this lamp include a switch? No the lamp is supplied with a 20cm fly-lead which needs connecting to a switched power supply. A switch or switched circuit must be provided separately. What colour temperature is this lamp? 3000K warm white. This is a softer, more amber-toned light output that creates a relaxed, ambient atmosphere for outdoor and awning use. What is the difference between the 23450BLKB and the 23260BLKB? The 23450BLKB is the 443mm version with 36 LEDs, while the 23260BLKB is the shorter 260mm version with 18 LEDs. Both are black housing, 12V, 3000K warm white. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Triple Jumbo Stop/Tail/Indicator Twin Pack Sequential Indicator, Diffused Tail, Clear Lens Product Overview The LED Autolamps 595STIM3-2 is a triple-module Jumbo rear combination lamp twin blister pack covering stop, tail, and indicator with sequential indicator function and diffused tail. The triple module design features three individually surface-mountable lamp sections, supplied as a pair (LHS and RHS) for a complete left and right rear installation. The clear lens gives a clean, modern appearance when inactive. ECE road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Triple-module design — three individually surface-mountable lamp sections in the Jumbo format for a high-density rear lighting footprint Sequential indicator — LEDs sweep progressively for a modern, premium directional effect Diffused tail function — smooth, even tail light output across the clear lens face Clear lens — clean, modern appearance when inactive; function colours activate when energised LHS and RHS twin blister — both lamps supplied for a complete left and right rear installation Low-profile design — slim form factor suited to Jumbo trailer and vehicle rear panels ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 595STIM3-2 Pack Contents 2 lamps (LHS + RHS) Series Jumbo Lamp Type Stop / Tail / Indicator Module Count Triple (3 sections) Indicator Type Sequential Tail Function Diffused Lens Clear Voltage Range 12V / 24V Mounting Individual surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Wide-body trucks, semi-trailers, and heavy commercial vehicles requiring triple-module Jumbo rear lighting 12V and 24V vehicle electrical systems LED Autolamps 595BARWM (same Jumbo series, full combination including reverse) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 595STIM3-2 approved for road use in Australia? Yes. The 595STIM3-2 is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. What does the triple module design mean? The 595STIM3-2 consists of three individual lamp sections that can each be surface mounted independently, giving installers flexibility in placement across wide trailer and truck body rear panels. Does the 595STIM3-2 include a reverse function? No. The 595STIM3-2 covers stop, tail, and indicator only. A separate reverse lamp is required if reverse function is needed. What does the sequential indicator look like? The sequential indicator sweeps its LEDs progressively across the lamp face in a directional wave — a modern, distinctive effect compared to standard uniform flashing. What warranty does the 595STIM3-2 carry? The 595STIM3-2 is backed by a 5-year warranty from LED Autolamps.

Read more less

24V Recessed Amber Indicator Strip Lamp 10 LEDs, ADR Approved, IP67, 237mm. Product Overview The LED Autolamps 235A24 is a 24V amber indicator lamp from the 235 Series the 24V version of the 235 Series amber rear indicator, sharing the same 237mm x 25mm x 3mm form factor and 203mm x 19mm cutout as the 12V variants listed throughout this session. With 10 square LEDs and a 40cm hardwired cable, the 235A24 suits 24V trucks, buses, and commercial trailers requiring a slimline recessed amber rear indicator. ADR approved (CRN 39092 per the OzLED 235 Series 24V indicator listing), IP67 rated, and backed by LED Autolamps' 5-year warranty. Surface mount brackets available separately. Supplied as a single unit. Key Specifications Function: Amber rear indicator LED count: 10 square LEDs Colour: Amber Dimensions: 237mm x 25mm x 3mm Cutout required: 203mm x 19mm Cable: 40cm hardwired Mount type: Recessed flush mount. Surface mount brackets available separately IP rating: IP67 Input voltage: 24V only Compliance: ADR approved CRN 39092 Warranty: 5 years Brand: LED Autolamps SKU: 235A24 Features & Benefits 24V only: Designed for 24V truck, bus, and commercial trailer applications 10 square LEDs: Amber LED array for bright, consistent rear indicator output Slimline recessed 3mm depth: Flush installation for a professional appearance ADR approved CRN 39092: Certified for amber indicator use on Australian road vehicles Surface mount brackets available: Optional brackets for non-recessed applications IP67 waterproof: Completely sealed against dust and temporary water immersion 40cm hardwired cable: Pre-wired for standard installation configurations 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 235A24 Brand LED Autolamps Series 235 Series Function Amber Rear Indicator LED Count 10 square LEDs LED Colour Amber Dimensions 237mm x 25mm x 3mm Cutout Required 203mm x 19mm Cable Length 40cm hardwired Mount Type Recessed flush (surface mount brackets available) IP Rating IP67 Input Voltage 24V only ADR Compliance CRN 39092 Warranty 5 Years Compatible With Suits 24V trucks, trailers, and commercial vehicles requiring slimline recessed amber indicator lighting: 24V rigid truck and semi-trailer rear panels Bus and coach rear lighting systems Commercial trailer builders using the 235 Series recessed format Frequently Asked Questions Is this lamp 12V or 24V? The 235A24 is 24V only confirmed by the supplier features and the "24" in the SKU. For the 12V equivalent, refer to the 235CA12 (clear lens) or 235A12 (amber lens). What is the ADR compliance code for this lamp? CRN 39092 confirmed from the OzLED 235 Series 24V indicator listing as consistent with this SKU. What cutout size does this lamp require? The 235A24 requires a 203mm x 19mm cutout for recessed installation. How many LEDs does this lamp have? 10 square LEDs confirmed from the supplier title and specifications. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 24V compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Reverse Lamp with Diffused Tail Function Coloured Lens, 12/24V Product Overview The LED Autolamps 595WM is a single ECE-approved reverse lamp with diffused tail function and coloured lens, in the 595 Jumbo series format. The diffused tail function delivers a smooth, even light spread rather than individual LED points suited to Jumbo trailer and truck body rear installations requiring a clean, premium reverse lamp appearance. 12/24V multivolt and backed by a 5-year warranty. Features & Benefits Diffused tail function — smooth, even light output for a premium appearance Coloured lens — defined lens appearance when active Single lamp — sold individually for replacement or standalone reverse lamp installations ECE approved — meets international road approval standards for legal on-road use as a reverse lamp 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 595WM Lamp Type Reverse Tail Function Diffused Lens Coloured Voltage Range 12V / 24V Compliance ECE Packaging Blister Warranty 5 years Compatible With / Goes Well With Wide-body trucks, semi-trailers, and commercial vehicles requiring a standalone reverse lamp 12V and 24V vehicle electrical systems LED Autolamps 595BARWM (same 595 Jumbo series — combination lamp including reverse) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 595WM approved for road use in Australia? Yes. The 595WM is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as a reverse lamp. What does the diffused tail function mean on a reverse lamp? The diffused function delivers a smooth, even spread of light rather than showing individual LED point sources through the lens — giving a cleaner, more premium appearance when the lamp is active. What are the dimensions of the 595WM? Dimensions were not confirmed in available supplier data — verify with LED Autolamps before ordering. What is the IP rating on the 595WM? IP rating was not confirmed in available supplier data — verify before use in exposed or wet environments. What warranty does the 595WM carry? The 595WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Recessed Stop/Tail/Indicator Combination Strip Lamp Clear Lens, Red & Amber LEDs, ADR/ECE, IP67. Product Overview The LED Autolamps 235AR12 is a 12V stop/tail/indicator combination lamp from the 235 Series three functions in a single slimline recessed strip. The 235AR12 provides stop, tail, and indicator output through a clear lens with internal red and amber LEDs, flush mount, ADR approved. Supplying three rear lamp functions in one 237mm x 25mm x 3mm module significantly simplifies trailer and vehicle rear panel wiring by eliminating the need for separate stop/tail and indicator lamps. The 235AR12 has a 40cm cable, 203mm x 19mm cutout for recessed mounting, IP67 rating, and 5-year warranty. Sold individually in a blister retail pack. Supplied with a white rubber grommet. Surface mount brackets available separately for non-recessed applications. Key Specifications Functions: Stop, tail, indicator Lens: Clear with internal red and amber LEDs Dimensions: 237mm x 25mm x 3mm Grommet: White rubber (included) Cutout required: 203mm x 19mm Cable: 40cm Mount type: Recessed push into cutout, screw fix. Surface mount brackets available separately IP rating: IP67 Input voltage: 12V only Compliance: ADR/ECE approved Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 235AR12 Features & Benefits Three functions in one lamp: Stop, tail, and indicator in a single 235 Series strip eliminates the need for separate stop/tail and indicator modules Clear lens with red and amber LEDs: Modern clear lens appearance with internal red LEDs for stop/tail and amber LEDs for indicator no UV lens fading White rubber grommet included: Supplied with white rubber grommet for recessed installation Slimline recessed 3mm depth: Flush installation for a professional appearance ADR/ECE approved: Certified for stop, tail, and indicator use on Australian road vehicles 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 40cm cable: Pre-wired for standard installation configurations IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 235AR12 Brand LED Autolamps Series 235 Series Functions Stop, Tail, Indicator Lens Clear internal red and amber LEDs Dimensions 237mm x 25mm x 3mm Grommet White rubber (included) Cutout Required 203mm x 19mm Cable Length 40cm Mount Type Recessed (surface mount brackets available) IP Rating IP67 Input Voltage 12V only Compliance ADR/ECE approved Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits 12V trailers, caravans, and vehicles requiring recessed stop/tail/indicator combination lighting: Box trailers and light trailers Caravans and camper trailers Tray vehicles and light commercial vehicles Boat trailers Frequently Asked Questions What functions does the 235AR12 provide? Stop, tail, and indicator three functions in one recessed 235 Series strip lamp. Is this lamp 12V or 24V? The 235AR12 is 12V only. Does the 235AR12 include a reverse function? No the 235AR12 provides stop, tail, and indicator only. For a reverse lamp to complete the rear lighting set, refer to the 235W12E. What cutout size does this lamp require? The 235AR12 requires a 203mm x 19mm cutout for recessed installation. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Sequential Indicator Strip Lamp Amber Lens, 10 LEDs, 1.2s Sweep, ADR/ECE Approved. Product Overview The LED Autolamps 235ASEQB is a 12V sequential indicator strip lamp from the 235 Sequential Series the amber lens variant, complementing the clear lens 235CSEQB listed earlier in this session. Both deliver the same sequential sweeping amber indicator effect, with the 235ASEQB using a traditional amber coloured lens rather than the clear lens of the 235CSEQB. The 235 Series sequential indicator uses 10 high-brightness SMD LEDs through a Fresnel-style lens, sequencing in a 1.2-second interval for clear, dynamic direction indication. Measuring 237mm x 25mm x 3mm, the 235ASEQB recesses into a 203mm x 19mm cutout and is supplied with a 40cm cable. ADR/ECE approved, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single bulk unit. Key Specifications Function: Sequential indicator Lens: Amber LED count: 10 SMD LEDs Sequence: 1.2-second sweep interval Dimensions: 237mm x 25mm x 3mm Cutout required: 203mm x 19mm Cable: 40cm Mount type: Recessed push into cutout, screw fix. Surface mount brackets available separately IP rating: IP67 Input voltage: 12V (confirm with retailer see note) Compliance: ADR/ECE approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 235ASEQB Features & Benefits Amber lens sequential indicator: Traditional amber coloured lens with sequential LED sweep for a premium, modern indicator effect the amber lens alternative to the clear lens 235CSEQB 10 SMD LEDs, Fresnel lens: High-brightness LEDs through Fresnel-style optics deliver an intense, focused sequential amber sweep 1.2-second sweep: Dynamic sequential sweep sequence for improved indicator visibility and modern styling ADR/ECE approved: Certified for indicator use on Australian and international road vehicles and trailers Slimline recessed 3mm depth: Flush installation for a professional appearance Surface mount brackets available: Optional brackets for non-recessed installations IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 235ASEQB Brand LED Autolamps Series 235 Sequential Series Function Sequential Indicator Lens Amber LED Count 10 SMD LEDs Sequence Interval 1.2 seconds Dimensions 237mm x 25mm x 3mm Cutout Required 203mm x 19mm Cable Length 40cm Mount Type Recessed (surface mount brackets available) IP Rating IP67 Input Voltage 12V (confirm with retailer) Compliance ADR/ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits 12V trailers, caravans, trucks, and commercial vehicles requiring dynamic sequential amber indicator output: Tray vehicles and ute conversions Caravans and camper trailers Commercial trailer builds using the 235 Series recessed format Frequently Asked Questions What is the difference between the 235ASEQB and the 235CSEQB? Both are 12V sequential indicator strip lamps with identical sequential sweep function, 10 LEDs, and 235 Series dimensions. The 235ASEQB has an amber coloured lens while the 235CSEQB has a clear lens with internal amber LEDs. Choose based on your preferred lens appearance. What is the sequential sweep speed? The 235 Sequential Series sweeps in a 1.2-second interval a dynamic, modern indicator effect for improved visibility. Is this lamp ADR/ECE approved? Yes the 235ASEQB is ADR/ECE approved for sequential indicator use on Australian road vehicles and trailers. Can this lamp be surface mounted? Yes surface mount brackets are available separately. Refer to the 235B1B (black single bracket, previously listed) for a compatible surface mount option. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Recessed Amber Indicator Strip Lamp Clear Lens, 0.14A, ADR Approved, IP67, 237mm. Product Overview The LED Autolamps 235CA12 is a 12V amber indicator lamp from the 235 Series the clear lens amber indicator variant for 12V rear indicator applications. The "CA" in the SKU denotes Clear lens with Amber LEDs and "12" confirms 12V. Drawing just 0.14A at 13.8V, the 235CA12 provides a slimline, flush-mount amber indicator solution in the proven 237mm x 25mm x 3mm 235 Series recessed format. Recesses into a 203mm x 19mm cutout for a clean, professional installation. ADR approved, IP67 rated, and supplied with a 40cm pre-wired cable. Surface mount brackets are available separately for non-recessed applications. Backed by LED Autolamps' 5-year warranty and supplied as a single unit. Key Specifications Function: Amber indicator Lens: Clear with internal amber LEDs Current draw: 0.14A @ 13.8V Dimensions: 237mm x 25mm x 3mm Cutout required: 203mm x 19mm Cable: 40cm Mount type: Recessed flush mount. Surface mount brackets available separately IP rating: IP67 Input voltage: 12V only Compliance: ADR approved Warranty: 5 years Brand: LED Autolamps SKU: 235CA12 Features & Benefits Clear lens with amber LEDs: Modern clean lens appearance with internal amber LEDs maintains colour accuracy over time without UV fading from tinted lenses 0.14A current draw: Low electrical load at 12V for efficient indicator circuit operation Slimline recessed 3mm depth: Flush installation for a professional appearance within the mounting surface ADR approved: Legal for amber indicator use on Australian road vehicles and trailers 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles Surface mount brackets available: Optional brackets for applications where recessed installation is not practical 40cm cable: Pre-wired for standard installation configurations IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 235CA12 Brand LED Autolamps Series 235 Series Function Amber Indicator Lens Clear internal amber LEDs Current Draw 0.14A @ 13.8V Dimensions 237mm x 25mm x 3mm Cutout Required 203mm x 19mm Cable Length 40cm Mount Type Recessed flush (surface mount brackets available) IP Rating IP67 Input Voltage 12V only Compliance ADR approved Warranty 5 Years Compatible With Suits 12V trailers, caravans, and vehicles requiring slimline recessed amber indicator lighting: 12V trailer rear panels Caravans and camper trailers Light commercial vehicle rear lighting Tray vehicle and ute builds in the 235 Series format Frequently Asked Questions What is the current draw of this lamp? The 235CA12 draws 0.14A at 13.8V a low electrical load suited to standard 12V indicator circuits. Is this lamp 12V or 24V? The 235CA12 is 12V only confirmed by the "12" in the SKU and supplier specs. For a 24V amber indicator in the 235 Series, refer to the 235CA24. What cutout size does this lamp require? The 235CA12 requires a 203mm x 19mm cutout for recessed installation. Can this lamp be surface mounted? Yes surface mount brackets are available separately for applications where a recessed cutout is not practical. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility before purchasing. Contact the seller if you're unsure.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Recessed Front Direction Indicator Strip Lamp Clear Lens, ADR Approved, IP67, 237mm. Product Overview The LED Autolamps 235CAT1 is a 12V front direction indicator lamp from the 235 Series the front indicator (Category 1) variant of the slimline recessed strip range. This is a clear lens recessed front indicator strip lamp with internal coloured LEDs, measuring 237mm x 25mm x 3mm, 12V only, ADR approved, with a 203mm x 19mm cutout, 40cm cable, IP67, and 5-year warranty. The "CAT1" in the SKU confirms this is a Category 1 front direction indicator suited to bull bars, tray vehicle front panels, cab corners, and trailer fronts requiring a slim, flush-mounted amber front indicator in the 235 Series form factor. Surface mount accessory brackets are available separately for non-recessed applications. Key Specifications Function: Front direction indicator (Category 1) Lens: Clear with internal amber LEDs LED count: 18 (235 Series standard) Dimensions: 237mm x 25mm x 3mm (lamp module) Cutout required: 203mm x 19mm Cable: 40cm Mount type: Recessed push into cutout horizontally, fix with screws. Surface mount brackets available separately IP rating: IP67 Input voltage: 12V only Compliance: ADR approved Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 235CAT1 Features & Benefits Front direction indicator (Category 1): Specifically designed for front direction indicator applications bull bars, tray fronts, cab corners where a slimline recessed amber indicator is required Clear lens with internal amber LEDs: Modern clean lens appearance with internal amber LEDs for bright, consistent front indicator output 18 LED strip: High-impact lens over 18 high-brightness LEDs for strong, visible front indicator output Slimline recessed 3mm depth: Mounts flush within the vehicle panel for a clean, professional appearance ADR approved: Certified for Category 1 front direction indicator use on Australian road vehicles Surface mount brackets available: Optional brackets for applications where recessed installation is not practical IP67 waterproof: Completely sealed against dust and water 12V only: Direct 12V compatibility for passenger vehicles, trailers, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 235CAT1 Brand LED Autolamps Series 235 Series Function Front Direction Indicator (Category 1) LED Count 18 Lens Clear internal amber LEDs Lamp Module Dimensions 237mm x 25mm x 3mm Cutout Required 203mm x 19mm Cable Length 40cm Mount Type Recessed (surface mount brackets available) IP Rating IP67 Input Voltage 12V only Compliance ADR approved Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits 12V vehicles requiring a slimline front direction indicator including: Bull bars on 4WDs and utes where a slimline front indicator is required Tray vehicle front panel indicator applications Cab corners on trucks and commercial vehicles Trailer fronts requiring a Category 1 front indicator Frequently Asked Questions What is a Category 1 front direction indicator? Category 1 is the ADR/ECE classification for front direction indicators the amber indicators mounted at the front of a vehicle to signal turning intentions to oncoming traffic. The 235CAT1 is specifically approved for this front indicator function. Is this the same as a rear indicator? No the 235CAT1 is a front direction indicator (Category 1). Rear indicators are a different ADR category. Confirm which position you need before purchasing. What cutout size does this lamp require? The 235CAT1 requires a 203mm x 19mm cutout for recessed installation. Can this lamp be surface mounted? Yes surface mount accessory brackets are available separately for applications where recessed installation is not practical. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility and front vs rear indicator function before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Recessed Stop/Tail Lamp Clear Lens, ADR/ECE Approved, IP67, 237mm. Product Overview The LED Autolamps 235CR12 is a 12V stop/tail lamp from the 235 Series the clear lens variant of the 235 Series stop/tail in 12V. The "C" in the SKU denotes clear lens, "R" denotes stop/tail (red function), and "12" confirms 12V. The clear lens version uses internal red LEDs to produce stop and tail output, providing a modern clean lens appearance compared to the traditional red tinted lens of the 235R12. Measuring 237mm x 25mm x 3mm, the 235CR12 recesses into a 203mm x 19mm cutout for a flush installation on truck and trailer rear panels. ADR/ECE approved, IP67 rated, and supplied with a 40cm cable. Surface mount brackets available separately. Backed by LED Autolamps' 5-year warranty and supplied as a single unit. Key Specifications Function: Stop and tail Lens: Clear (internal red LEDs) Dimensions: 237mm x 25mm x 3mm (lamp module) Cutout required: 203mm x 19mm Cable: 40cm Mount type: Recessed push into cutout with grommet, screw fix. Surface mount brackets available separately IP rating: IP67 Input voltage: 12V only Compliance: ADR/ECE approved Warranty: 5 years Brand: LED Autolamps SKU: 235CR12 Features & Benefits Clear lens with internal red LEDs: Modern clean lens design provides a sleek appearance while delivering compliant red stop and tail output avoids UV fading associated with tinted lenses 12V only: Designed for 12V trailer, caravan, and light commercial vehicle applications Slimline recessed design: 3mm lamp module depth for flush, professional installation ADR/ECE approved: Legal for stop and tail use on Australian road vehicles and trailers Surface mount brackets available: Optional brackets for non-recessed applications IP67 waterproof: Completely sealed against dust and temporary water immersion 40cm cable: Pre-wired for straightforward installation 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 235CR12 Brand LED Autolamps Series 235 Series Function Stop and Tail Lens Clear (internal red LEDs) Lamp Module Dimensions 237mm x 25mm x 3mm Cutout Required 203mm x 19mm Cable Length 40cm Mount Type Recessed (surface mount brackets available) IP Rating IP67 Input Voltage 12V only Compliance ADR/ECE approved Warranty 5 Years Compatible With Suits 12V trailers, caravans, and vehicles requiring slimline recessed stop/tail lighting: 12V rigid trailer and caravan rear panels Light commercial vehicle rear lighting Tray vehicle and ute builds in the 235 Series format Frequently Asked Questions Is this lamp 12V or 24V? The 235CR12 is 12V only confirmed by the "12" in the SKU. For the 24V clear lens stop/tail, refer to the 235RC24E. What is the difference between the 235CR12 and the 235R12? Both are 12V stop/tail lamps in the 235 Series. The 235CR12 has a clear lens with internal red LEDs while the 235R12 has a traditional red tinted lens. The clear lens provides a modern clean appearance. What cutout size does this lamp require? The 235CR12 requires a 203mm x 19mm cutout for recessed installation. Can this lamp be surface mounted? Yes surface mount brackets are available separately for applications where a recessed cutout is not practical. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Sequential Indicator Strip Lamp Recessed Mount, 10 SMD LEDs, 1.2s Sweep, ECE Approved. Product Overview The LED Autolamps 235CSEQB is a 12V sequential indicator strip lamp from the 235 Sequential Series the single bulk unit version of the popular 235 Series sequential indicator range. The 235 Series sequential indicator uses 10 high-brightness SMD LEDs through a Fresnel-style lens, sequencing in a 1.2-second interval for clear, dynamic direction indication.  Features include recessed fitting, surface mount brackets available, low-profile slimline design, ECE approved, IP67, 12 Volt Only, 237mm x 25mm x 3mm, 5-year warranty. Each lamp includes a 40cm cable and clear lens. Installation: mount onto flat surface horizontally, push lamp and grommet into 203mm x 19mm cutout, run wires through back and fix with screws (Max Torque 8kgf/cm). Surface mount brackets also available separately. Key Specifications Function: Sequential indicator LED count: 10 SMD LEDs Lens: Clear Fresnel style Sequence: 1.2-second sweep interval Dimensions: 237mm x 25mm x 3mm Cutout required: 203mm x 19mm Cable: 40cm Mount type: Recessed push into cutout, screw fix. Surface mount brackets available separately IP rating: IP67 Input voltage: 12V only Compliance: ECE approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 235CSEQB Features & Benefits Sequential indicator: 10 SMD LEDs sequence through a Fresnel-style lens in a 1.2-second interval, delivering a dynamic, modern sweeping indicator effect for improved visibility Fresnel style lens: Enhanced optical performance for bright, focused sequential amber output Recessed mount: Pushes into 203mm x 19mm cutout for a flush, clean appearance 12V only: Designed for 12V trailer, caravan, and vehicle applications Surface mount brackets available: Optional brackets sold separately for non-recessed installations ECE approved: Certified for indicator use on Australian and international road vehicles IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Single bulk unit: Individual unit supply without retail blister packaging Technical Specs Specification Detail SKU 235CSEQB Brand LED Autolamps Series 235 Sequential Series Function Sequential Indicator LED Count 10 SMD LEDs Lens Clear Fresnel style Sequence Interval 1.2 seconds Dimensions 237mm x 25mm x 3mm Cutout Required 203mm x 19mm Cable Length 40cm Mount Type Recessed (surface mount brackets available) IP Rating IP67 Input Voltage 12V only Compliance ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits 12V trailers, caravans, trucks, and commercial vehicles requiring dynamic sequential indicator output: Tray vehicles and ute conversions requiring a modern indicator upgrade Caravans and camper trailers requiring premium sequential indicators Commercial trailer builds using the 235 Series recessed format Frequently Asked Questions What does "sequential" indicator mean? The sequential indicator uses 10 SMD LEDs that light up progressively in a sweeping motion sequencing in a 1.2-second interval creating a dynamic, modern sweeping amber effect rather than a standard on/off flash. Is this lamp 12V or 24V? The 235CSEQB is 12V only. There is no 24V sequential variant in this series. What is the difference between the 235CSEQB and the 235CSEQ-2? Both are the same sequential indicator lamp. The 235CSEQB is a single bulk unit without retail packaging. The 235CSEQ-2 is a twin blister pack including two lamps and a function simulator button for demonstrating the sequential effect at point of sale. What cutout size does this lamp require? The 235CSEQB requires a 203mm x 19mm cutout for recessed installation. Surface mount brackets are available separately. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX Prospector 12 LED Work Light Flood Beam 12V/24VOEX ACX5585 Features: High-Output 7W LEDs Available in 5, 9 and 12 LED configurations Colour Coded Backplates to Identify Beam Pattern OEX ACX5585 Specifications: Warranty Three Years Voltage 12 or 24 Note EMC: CISPR 25 - Class 3 Beam Pattern Flood Light Type LED Size 157 x 139 x 85mmmm Lens Material Polycarbonate Other Features 10920 Raw Lumen Light Output 8200 Effective Lumen Current 7A @ 12V LEDs 12 Body Material Aluminium Mount Multiple bolts Connector DTP04-2P Environmental IP68/69K Legendary Products & Support From Authorized Dealers When you choose OEX, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized OEX dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by OEX's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized OEX dealer today!

Read more less