12V Mini Jumbo Ute Tray Combination Lamp Kit Load Resistors, DT04-6P Plug, Suits Patch Lead System. Product Overview The LED Autolamps 280ARWM2LR12/450 is a 12V ready-to-connect ute tray combination lamp kit, pairing the popular 280 Series Mini Jumbo stop/tail/indicator/reverse lamp with pre-wired load resistors and a DT04-6P male connector the 12V equivalent of the 280ARWM2LR24/450. Designed to suit the LED Autolamps patch lead system and fit most popular brands of vehicle trays, this kit simplifies 12V tray vehicle rear lamp installation by including the resistors and plug already wired in combine with the applicable patch lead to complete the connection. The two pre-wired load resistors prevent hyper-flash and dashboard error warnings that occur on modern 12V vehicles with CAN bus lamp monitoring when LED lamps replace incandescent globes. The DT04-6P plug connects directly to the patch lead for a secure, weather-sealed plug-and-play installation. IP67 rated, ECE approved, and backed by LED Autolamps' 5-year warranty. Key Specifications Lamp functions: Stop, tail, indicator, reverse Voltage: 12V only Lamp dimensions: 282mm x 95mm x 28mm Connector: DT04-6P male Load resistors: Pre-wired (2 x 12V) Loom length: Approx. 450mm Application: Ute tray suits patch lead system IP rating: IP67 Compliance: ECE approved Warranty: 5 years Brand: LED Autolamps SKU: 280ARWM2LR12/450 Features & Benefits Purpose-built for ute tray patch lead system: Designed to integrate directly with the LED Autolamps patch lead system for plug-and-play tray vehicle rear lamp installation Pre-wired load resistors: Two load resistors prevent hyper-flash and indicator fault warnings on modern 12V vehicles with CAN bus or lamp failure monitoring DT04-6P male connector: Deutsch DT connector for secure, weather-sealed connection to the applicable patch lead 12V only: Specifically configured for 12V passenger vehicles, ute tray conversions, and light commercial applications Mini Jumbo 280 Series lamp: Proven 282mm x 95mm x 28mm four-function form factor ECE approved: All functions certified for legal road use IP67 weatherproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 280ARWM2LR12/450 Brand LED Autolamps Lamp Series 280 Series Mini Jumbo Functions Stop, Tail, Indicator, Reverse Voltage 12V only Lamp Dimensions 282mm x 95mm x 28mm Loom Length Approx. 450mm Connector DT04-6P male Load Resistors Pre-wired (2 x 12V) IP Rating IP67 Compliance ECE approved Warranty 5 Years Compatible With Designed for 12V ute tray and light commercial vehicle applications: Popular aftermarket ute tray bodies on 12V vehicles Light commercial trucks with tray-body rear lighting requirements Any 12V vehicle requiring a plug-and-play tray lamp solution with load resistors Frequently Asked Questions Why do I need load resistors in this kit? Modern 12V vehicles with CAN bus systems or lamp failure monitoring circuits detect the low current draw of LED lamps as a globe failure, causing hyper-flash or dashboard error warnings. The pre-wired load resistors add back the correct electrical load to prevent these issues. What patch lead do I need to complete the installation? The required patch lead depends on your specific vehicle make and model. Contact your LED Autolamps retailer to confirm the correct patch lead for your 12V tray vehicle. What is the difference between this kit and the 280ARWM2LR24/450? Both are 280 Series Mini Jumbo tray lamp kits with load resistors and DT04-6P connectors. The 280ARWM2LR12/450 is 12V only while the 280ARWM2LR24/450 is 24V. Choose based on your vehicle's electrical system voltage. Is this the same lamp as the 280ARWMB? Both use the 280 Series Mini Jumbo lamp. The 280ARWMB is the lamp only (single bulk unit) while the 280ARWM2LR12/450 includes the pre-wired loom, load resistors, and DT04-6P connector for patch lead system integration. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Mini Jumbo Ute Tray Combination Lamp Kit Load Resistors, DT04-6P Plug, Suits Popular Tray Brands. Product Overview The LED Autolamps 280ARWM2LR24/450 is a 24V ready-to-connect ute tray combination lamp kit, pairing the popular 280 Series Mini Jumbo stop/tail/indicator/reverse lamp with pre-wired load resistors and a DT04-6P male connector. Designed to fit most popular brands of vehicle trays, this kit is the 24V equivalent of the 12V tray lamp kit format pre-wired for direct connection to the applicable vehicle patch lead, eliminating the need for separate load resistor installation. The included load resistors prevent hyper-flash and dashboard error warnings caused by the low current draw of LED lamps on vehicles with CAN bus or lamp failure monitoring systems a critical requirement for modern 24V commercial vehicle applications. The DT04-6P plug connects directly to the applicable patch lead for a clean plug-and-play installation. IP67 rated, ECE approved, and backed by LED Autolamps' 5-year warranty. Key Specifications Lamp functions: Stop, tail, indicator, reverse Voltage: 24V (see note features list states "12 or 24 Volt Options") Lamp dimensions: 282mm x 95mm x 28mm Connector: DT04-6P male Load resistors: Pre-wired (2 x 24V) Loom length: Approx. 450mm Application: Ute tray suits most popular brands IP rating: IP67 Compliance: ECE approved Warranty: 5 years Brand: LED Autolamps SKU: 280ARWM2LR24/450 Features & Benefits Purpose-built for ute tray applications: Engineered to fit most popular brands of aftermarket ute tray bodies for a known-fit lighting solution Pre-wired load resistors: Two load resistors prevent hyper-flash and indicator fault warnings on 24V vehicles with lamp failure monitoring or CAN bus indicator circuits DT04-6P male connector: Industry-standard Deutsch DT connector for secure, weather-sealed plug-and-play connection to the applicable patch lead 24V ready: Specifically configured for 24V commercial vehicle applications including trucks, buses, and large commercial ute tray conversions Mini Jumbo 280 Series lamp: Proven 282mm x 95mm x 28mm form factor widely used across the Australian trailer and commercial vehicle market ECE approved: All functions certified for legal road use IP67 weatherproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 280ARWM2LR24/450 Brand LED Autolamps Lamp Series 280 Series Mini Jumbo Functions Stop, Tail, Indicator, Reverse Voltage 24V Lamp Dimensions 282mm x 95mm x 28mm Loom Length Approx. 450mm Connector DT04-6P male Load Resistors Pre-wired (2 x 24V) IP Rating IP67 Compliance ECE approved Warranty 5 Years Compatible With Designed for 24V ute tray and commercial vehicle applications: Popular aftermarket ute tray bodies on 24V vehicles Commercial trucks with tray-body rear lighting requirements Any 24V vehicle requiring a plug-and-play tray lamp solution with load resistors Frequently Asked Questions Why do I need load resistors in this kit? Modern 24V commercial vehicles with CAN bus systems or lamp failure monitoring circuits detect the low current draw of LED lamps as a globe failure, causing hyper-flash or dashboard error warnings. The pre-wired load resistors add back the correct electrical load to prevent these issues. What patch lead do I need to complete the installation? The required patch lead depends on your specific vehicle make and model. Contact your LED Autolamps retailer to confirm the correct patch lead for your 24V tray vehicle. Is this kit suitable for 12V vehicles? The 280ARWM2LR24/450 is specifically listed as 24V in the SKU and title. A 12V equivalent may be available confirm with your retailer if a 12V version is required. What does the DT04-6P connector do? The DT04-6P is an industry-standard Deutsch DT connector that connects this lamp kit to the applicable vehicle patch lead, providing a secure, weather-sealed plug-and-play connection without cutting or splicing vehicle wiring. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Mini Jumbo Stop/Tail/Indicator/Reverse Combination Lamp 36 LEDs, 1.2m Cable, ADR/ECE Approved, Single Bulk Unit. Product Overview The LED Autolamps 280ARWMB is the four-function Mini Jumbo rear combination lamp from the 280 Series, delivering stop, tail, indicator, and reverse in a single 282mm x 95mm x 28mm unit the bulk single-unit supply version. With 36 LEDs distributed across functions (12 for stop/tail, 12 for indicator, and 12 for reverse), a 1.2m cable, and ADR approval, the 280ARWMB is a widely used combination lamp across 4WD tray vehicles, caravans, and commercial trailers. The acrylic lens over ABS base construction provides UV resistance and durability, while individual lens modules are replaceable if accidentally damaged. Chrome inner reflectors enhance LED output, and the lamp is vibration tested with solid-state circuit technology and no moving parts. Surface mount horizontally with stainless steel bolts, running the cable through a 12mm hole. ADR and ECE approved, IP67 rated, 12V and 24V compatible, and backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, indicator, reverse LED count: 36 (12 stop/tail, 12 indicator, 12 reverse) Lens: Acrylic Base: ABS Dimensions: 282mm x 95mm x 28mm Cable: 1.2m Mount type: Horizontal surface mount stainless steel bolts, cable through 12mm hole IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 280ARWMB Features & Benefits 36 LEDs across four functions: 12 LEDs each for stop/tail, indicator, and reverse functions deliver bright, consistent output for all operational modes Individual replaceable lenses: Each lens module can be replaced individually if accidentally damaged avoiding the cost of replacing the entire lamp assembly Chrome inner reflectors: Enhance LED brightness and support ADR compliance performance 1.2m cable: Generous cable length for flexible routing in most trailer and tray vehicle installations Acrylic lens over ABS base: Durable, UV-resistant construction for long-term outdoor performance Mini Jumbo design: Popular, proven form factor widely used across Australian 4WD, caravan, and commercial trailer applications Vibration tested: Solid-state circuit technology with no moving parts for reliable performance in demanding environments ADR and ECE approved: Legal for all four functions on Australian road vehicles IP67 weatherproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 280ARWMB Brand LED Autolamps Series 280 Series Mini Jumbo Functions Stop, Tail, Indicator, Reverse LED Count 36 (12 stop/tail, 12 indicator, 12 reverse) Lens Acrylic Base ABS Dimensions 282mm x 95mm x 28mm Cable Length 1.2m Mount Type Horizontal surface mount stainless steel bolts Mounting Hole 12mm for cable IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles including: 4WD tray and canopy builds Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Frequently Asked Questions How many LEDs does the 280ARWMB have? 36 LEDs total 12 for stop/tail, 12 for indicator, and 12 for reverse distributed across the three function zones of the lamp. Can individual lens modules be replaced? Yes the 280 Series features replaceable individual lens modules. If one module is accidentally damaged, replace only that module rather than the entire lamp assembly. What is the difference between the 280ARWMB and the 280RWM? The 280ARWMB includes all four functions stop, tail, indicator, and reverse. The 280RWM is stop/tail/reverse only without the amber indicator function. Is this the same as the 280ARWM? Both are four-function Mini Jumbo lamps. The 280ARWMB is the bulk single-unit version while the 280ARWM typically comes in retail blister packaging. The "B" suffix denotes bulk supply. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Mini Jumbo Stop/Tail/Reverse Combination Lamp Individual Replaceable Lenses, ADR/ECE Approved, 12/24V. Product Overview The LED Autolamps 280RWM is a stop/tail/reverse rear combination lamp from the 280 Series Mini Jumbo range the three-function variant without an amber indicator, suited to applications where a separate side direction indicator is used or where only stop, tail, and reverse functions are required in the rear lamp assembly. Featuring chrome inner reflectors that enhance the high-powered LEDs for superior brightness and ADR certification compliance, the 280 Series uses stainless steel bolt mounting at the rear of the unit with cable run through a 12mm hole for a clean, secure installation. The lamp has been vibration tested and incorporates solid-state circuit technology with no moving parts. Individual lens modules can be replaced should one be accidentally damaged without replacing the entire lamp assembly. IP67 rated, ADR and ECE approved, 12V and 24V compatible, and backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, reverse (no indicator) Dimensions: 282mm x 95mm x 28mm (confirmed see note above) Cable: 1.2m Mount type: Horizontal surface mount stainless steel bolts, cable through 12mm hole Lens: Individual replaceable modules IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Brand: LED Autolamps SKU: 280RWM Features & Benefits Three-function combination: Stop, tail, and reverse in a single Mini Jumbo unit suited to applications where a separate indicator lamp is used Individual replaceable lenses: If a single lens module is accidentally damaged, it can be replaced individually without replacing the entire lamp assembly reducing maintenance costs Chrome inner reflectors: Enhance LED output for superior brightness and ADR compliance performance Stainless steel bolt mount: Secure, corrosion-resistant horizontal surface mounting for long-term reliability Vibration tested: Solid-state circuit technology with no moving parts provides consistent performance in demanding vehicle and trailer environments ADR and ECE approved: Legal for stop, tail, and reverse functions on Australian road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 280RWM Brand LED Autolamps Series 280 Series Mini Jumbo Functions Stop, Tail, Reverse (no indicator) Dimensions 282mm x 95mm x 28mm (confirmed) Cable Length 1.2m Mount Type Horizontal surface mount stainless steel bolts Mounting Hole 12mm for cable Lens Individual replaceable modules IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring stop/tail/reverse combination rear lighting: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks 4WD tray and canopy builds Frequently Asked Questions Does this lamp include an indicator function? No the 280RWM is stop/tail/reverse only. For the version with an amber indicator, refer to the 280ARWM (stop/tail/indicator/reverse). Can individual lens modules be replaced? Yes the 280 Series features individual replaceable lens modules. If one module is accidentally damaged, it can be replaced without replacing the entire lamp assembly a key maintenance advantage over single-piece lamps. What are the correct dimensions of this lamp? The confirmed dimensions are 282mm x 95mm x 28mm based on the official LED Autolamps 280 Series specification. The supplier data listing of 190mm x 95mm x 28mm appears to be a data entry error. Always confirm with your retailer if dimensions are critical. Is this lamp ADR approved for Australian road use? Yes the 280RWM is ADR and ECE approved for stop, tail, and reverse functions on Australian road vehicles and trailers. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stop/Tail/Indicator Combination Lamp Black Housing, 20cm Cable, Single Bulk Unit, ADR/ECE Approved. Product Overview The LED Autolamps 282ARRMB is the bulk single-unit stop/tail/indicator rear combination lamp from the 282 Series the three-function version without a reverse lamp. Sharing the proven 284mm x 100mm x 27mm form factor, black housing, and modern bubble diamond lens of the 282 Series, the 282ARRMB is the non-reverse variant for applications where a separate reverse lamp is provided or not required. The "B" suffix denotes bulk supply a single unit without retail blister packaging, suited to workshops, fleet operators, and trade purchasers. ADR and ECE approved for stop, tail, and indicator functions, IP67 rated, 12V and 24V compatible, with a 20cm pre-wired cable. Mounts horizontally via rear bolts through a 10mm hole in the fixing surface. Backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, indicator (no reverse) Housing colour: Black Lens: Bubble diamond pattern Dimensions: 284mm x 100mm x 27mm Cable: 20cm pre-wired Mount type: Horizontal surface mount rear bolts through 10mm hole IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Pack quantity: Single unit (bulk no retail blister packaging) Brand: LED Autolamps SKU: 282ARRMB Features & Benefits Three-function combination lamp no reverse: Stop, tail, and indicator only suited to applications where a separate reverse lamp is provided or the reverse function is not required Bulk single unit: Individual lamp without retail blister packaging for workshops, fleet, and trade supply Black housing: Modern black finish consistent with the 282 Series range Bubble diamond lens: Distinctive 282 Series curved diamond pattern polycarbonate lens 20cm pre-wired cable: Colour-coded wiring for straightforward connection ADR and ECE approved: Legal for stop, tail, and indicator use on Australian road vehicles IP67 weatherproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 282ARRMB Brand LED Autolamps Series 282 Series Functions Stop, Tail, Indicator (no reverse) Housing Colour Black Lens Bubble diamond pattern Dimensions 284mm x 100mm x 27mm Cable Length 20cm Mount Type Horizontal surface mount rear bolts, 10mm hole IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring combination rear lighting without reverse including: Trailers where reverse is provided separately Caravans and camper trailers Box trailers and light commercial trailers Frequently Asked Questions Does this lamp include a reverse function? No the 282ARRMB provides stop, tail, and indicator functions only. For the version with reverse, refer to the 282ARWMB (single bulk) or 282ARWM (blister pack). What is the difference between the 282ARRMB and the 282ARWMB? Both are single bulk units in the same 282 Series form factor. The 282ARRMB is stop/tail/indicator only (no reverse) while the 282ARWMB includes a reverse function. What does the "B" suffix mean? The "B" suffix denotes bulk supply a single unit without retail blister packaging, suited to trade and workshop supply. How is this lamp mounted? Mount horizontally using the bolts in the rear of the lamp through a 10mm hole in the fixing surface. Refer to ADR 13/00 for mounting position and height requirements. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stop/Tail/Indicator/Reverse Combination Lamp Black Housing, 20cm Cable, Single Bulk Unit, ECE/ADR Approved. Product Overview The LED Autolamps 282ARWMB is the bulk single-unit version of the 282 Series stop/tail/indicator/reverse combination lamp the individual supply alternative to the standard blister-packaged 282ARWM. Sharing the same proven 284mm x 100mm x 27mm form factor, black housing, modern diamond lens, and 20cm pre-wired cable as the 282ARWM, the 282ARWMB is suited to workshops, fleets, and trade purchasers requiring single-unit access without retail blister packaging. Delivering four functions stop, tail, indicator, and reverse in a single compact unit, the 282ARWMB mounts horizontally via rear bolts through a 10mm hole in the fixing surface. ECE and ADR approved, IP67 rated, 12V and 24V compatible, and backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, indicator, reverse Housing colour: Black Lens: Bubble diamond pattern Dimensions: 284mm x 100mm x 27mm Cable: 20cm pre-wired Mount type: Horizontal surface mount rear bolts through 10mm hole IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE and ADR approved Warranty: 5 years Pack quantity: Single unit (bulk no retail blister packaging) Brand: LED Autolamps SKU: 282ARWMB Features & Benefits Bulk single unit: Individual lamp without retail blister packaging ideal for workshops, fleet operators, and trade purchasers requiring single-unit supply Four-function combination lamp: Stop, tail, indicator, and reverse in one compact 284mm unit Black housing: Modern black finish consistent with the 282ARWM Bubble diamond lens: Distinctive 282 Series curved diamond pattern lens 20cm pre-wired cable: Pre-wired lead with colour-coded wiring for fast installation Horizontal or vertical mounting: Flexible mounting orientation via rear bolts through 10mm hole ECE and ADR approved: Legal for road use across all four functions IP67 weatherproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger trailers and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 282ARWMB Brand LED Autolamps Series 282 Series Functions Stop, Tail, Indicator, Reverse Housing Colour Black Lens Bubble diamond pattern Dimensions 284mm x 100mm x 27mm Cable Length 20cm Mount Type Horizontal surface mount rear bolts, 10mm hole IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ECE and ADR approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring combination rear lighting including: 4WD and tray vehicles Caravans and camper trailers Box trailers and light commercial trailers Small to medium trucks Frequently Asked Questions What is the difference between the 282ARWMB and the 282ARWM? Both are the same 282 Series stop/tail/indicator/reverse lamp with black housing and 20cm cable. The 282ARWMB is supplied as a single bulk unit without retail blister packaging, while the 282ARWM comes in standard retail blister packaging. Choose based on your preferred supply format. Is this lamp ECE and ADR approved for Australian road use? Yes the 282ARWMB is ECE and ADR approved for stop, tail, indicator, and reverse functions on Australian road vehicles and trailers. How is this lamp mounted? Mount horizontally using the bolts in the rear of the lamp through a 10mm hole in the fixing surface. Refer to ADR 13/00 for mounting position and height requirements. What voltage systems does this lamp suit? The 282ARWMB operates on 12–24V DC, making it compatible with both 12V passenger and caravan trailer applications and 24V commercial truck systems. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Left-Hand Sequential Indicator Combination Lamp 284 Series, Single Unit, 10–30V, ECE Approved. Product Overview The LED Autolamps 284ARWMLB is the left-hand side, single bulk unit version of the 284 Series (Zeon) sequential rear combination lamp the direct companion to the right-hand 284ARWMRB listed immediately prior. Delivering stop, diffused tail, sequential indicator, reverse, and inbuilt reflector functions in the proven 284mm x 100mm x 37mm Zeon form factor, the "LB" suffix denotes Left Hand Bulk a single lamp for applications where only the left side needs replacement or a specific single-sided purchase is required. The sequential indicator sweeps outwards in a dynamic amber sequence for premium visibility and road presence. ECE approved, IP67 rated, and operating across 10–30V DC. Bolt-on horizontal surface mount with stainless steel fittings and 28cm pre-wired cable. Compatible with the optional MFBKT multi-fit bracket (sold separately). Backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail (diffused), sequential indicator, reverse, reflector Voltage: 10–30V DC (multivolt) Orientation: Left hand side (LHS) Dimensions: 284mm x 100mm x 37mm Cable: 28cm pre-wired Mount: Horizontal surface mount stainless steel bolts, wire through 10mm hole IP rating: IP67 Compliance: ECE approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 284ARWMLB Features & Benefits Left-hand specific: LHS orientation for correct lamp placement on the left side of the vehicle or trailer Sequential indicator: Dynamic sweeping amber LED indicator sequence for premium visibility and road presence Diffused tail function: Even, soft diffused tail light for a premium finished appearance Single unit (bulk): Individual lamp for single-side replacement or specific single-unit installations 28cm pre-wired cable: Ready for direct installation Stainless steel bolt mount: Secure, corrosion-resistant surface mounting MFBKT compatible: Suits the LED Autolamps multi-fit bracket for tray vehicle installations (sold separately) ECE approved: Legal for Australian road use across all functions IP67 weatherproof: Completely sealed against dust and temporary water immersion 10–30V multivolt: Suits 12V and 24V systems 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 284ARWMLB Brand LED Autolamps Series 284 Series (Zeon) Functions Stop, Diffused Tail, Sequential Indicator, Reverse, Reflector Orientation Left Hand Side (LHS) Voltage 10–30V DC (multivolt) Dimensions 284mm x 100mm x 37mm Cable Length 28cm Mount Type Horizontal surface mount stainless steel bolts Mounting Hole 10mm for wire IP Rating IP67 Current Stop 0.18A @ 13.8V / 0.08A @ 28V Current Tail 0.14A @ 13.8V / 0.07A @ 28V Current Indicator 0.3A @ 13.8V / 0.15A @ 28V Current Reverse 0.14A @ 13.8V / 0.08A @ 28V Compliance ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 10–30V trailers, caravans, ute trays, and commercial vehicles: 4WD tray and canopy builds Caravans and camper trailers Box trailers and light commercial trailers Small to medium trucks Frequently Asked Questions Is this a left or right-hand lamp? This is the left-hand side (LHS) lamp. For the right-hand side refer to the 284ARWMRB. For a matched left and right pair, refer to the 284ARWM-2 twin blister pack. What is the difference between the 284ARWMLB and the 284ARWM-2? The 284ARWM-2 is a matched left and right pair in a twin blister pack. The 284ARWMLB is the left-hand lamp only as a single bulk unit useful for single-side replacement. Is the MFBKT bracket included? No the MFBKT multi-fit bracket is sold separately. It is compatible with the 284ARWMLB for tray vehicle applications. What is the sequential indicator? The sequential indicator LEDs sweep outwards in a dynamic amber sequence rather than a standard on/off flash a premium indicator style for improved visibility and road presence. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Centre High Level Stop Lamp 16 LEDs, ECE/ADR Approved, 285mm, IP67. Product Overview The LED Autolamps 285BR12S3 is a 12V slimline centre high-level (high mount) stop lamp commonly known as a CHMSL (Centre High Mount Stop Lamp) or third brake light from the 285 Series. Designed to provide an additional, elevated brake light signal for improved rear-end collision avoidance on trailers, caravans, and commercial vehicles, the 285BR12S3 mounts centrally and at a higher position than the standard tail lamps for maximum visibility to following drivers. Containing 16 LEDs drawing 0.24A at 13.8V through a clear lens, the 285BR12S3 measures 285mm x 25mm x 10mm with an 8.5cm cable. ECE approved (E97R02/S323559*00) and ADR CTA-060136 compliant for high-level brake lamp use, and IP67 rated. Installation is via surface mount remove end caps, fix to flat surface with screws supplied, then refit end caps per ADR 13/00 mounting instructions. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Centre high-level stop lamp (CHMSL / third brake light) LED count: 16 Lens: Clear Cable length: 8.5cm Current draw: 0.24A @ 13.8V Dimensions: 285mm x 25mm x 10mm Mount type: Surface mount remove end caps, fix with screws, refit caps Voltage: 12V only IP rating: IP67 ECE compliance: E97R02/S323559*00 ADR compliance: CTA-060136 (ADR 49/00 High Level Brake) Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: 285BR12S3 Features & Benefits Centre high-level stop lamp: Provides an additional, elevated brake light signal above the standard tail lamp level for improved visibility to following vehicles reducing rear-end collision risk 16 LEDs: 16 red LEDs through a clear lens deliver bright, consistent stop lamp output ECE and ADR approved: ECE E97R02/S323559*00 and ADR CTA-060136 confirm legal compliance for centre high-level brake lamp use on Australian road vehicles Slimline 285mm x 25mm x 10mm: Ultra-compact strip format for unobtrusive central rear mounting Concealed screw mount: Remove end caps, screw fix to flat surface, refit end caps for no visible fasteners IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285BR12S3 Brand LED Autolamps Series 285 Series Function Centre High Level Stop Lamp (CHMSL) LED Count 16 Lens Clear Cable Length 8.5cm Current Draw 0.24A @ 13.8V Dimensions 285mm x 25mm x 10mm Mount Type Surface mount remove end caps, screw fix, refit caps Voltage 12V only IP Rating IP67 ECE Compliance E97R02/S323559*00 ADR Compliance CTA-060136 (ADR 49/00 High Level Brake) Warranty 5 Years Packaging Single unit Compatible With Suits 12V trailers, caravans, and vehicles requiring a centre high-level stop lamp including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light commercial vehicles Any vehicle or trailer requiring an additional central high-mount brake light Frequently Asked Questions What is a centre high-level stop lamp? A centre high-level stop lamp (CHMSL) is an additional brake light positioned centrally and higher than the standard stop lamps commonly known as a third brake light. It provides improved brake signal visibility to following drivers, particularly in heavy traffic or adverse weather conditions. Is this lamp ADR and ECE approved for Australian road use? Yes the 285BR12S3 is ECE approved under E97R02/S323559*00 and ADR approved under CTA-060136 (ADR 49/00) for centre high-level brake lamp use on Australian road vehicles and trailers. How many LEDs does this lamp have? The 285BR12S3 contains 16 red LEDs through a clear lens, drawing 0.24A at 13.8V. Is this lamp suitable for 24V systems? No the 285BR12S3 is 12V only. Confirm your vehicle or trailer operates on a 12V system before purchasing. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Front Direction Indicator Chrome End Caps, 285mm, ECE/ADR Approved, IP67. Product Overview The LED Autolamps 285CAT12 is a 12V slimline front direction indicator from the 285 Series the indicator-only 12V variant, without the front position (park) lamp function of the 285CAW12. Ideal for trailers, caravans, and 12V light commercial vehicles requiring a compact, low-profile front amber indicator in the proven 285 Series form factor. Measuring 285mm x 25mm x 10mm with a screw mount and clip-on chrome end caps, the 285CAT12 delivers a clean, professional finished appearance with no visible fasteners. ECE and ADR approved, IP67 rated, and capable of both horizontal and vertical mounting. Backed by LED Autolamps' 5-year warranty and supplied as a single unit in blister packaging. Key Specifications Function: Front direction indicator only (no park/position function) End caps: Chrome clip-on Dimensions: 285mm x 25mm x 10mm Mount type: Screw mount clip-on chrome caps conceal screws Mount orientation: Horizontal and vertical Voltage: 12V only IP rating: IP67 Compliance: ECE and ADR approved Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 285CAT12 Features & Benefits Front direction indicator only: Dedicated amber front indicator function without the combined park lamp of the 285CAW12 ideal where a separate park lamp is provided or not required Chrome clip-on end caps: Screw mount fasteners concealed beneath clip-on chrome end caps for a clean, professional finished appearance Slimline 285mm x 25mm x 10mm: Ultra-compact form factor for tight front panel and trailer mounting locations Horizontal and vertical mounting: Flexible orientation accommodates a wide range of trailer and vehicle configurations ECE and ADR approved: Certified for legal use as a front direction indicator on Australian road vehicles and trailers IP67 weatherproof: Completely sealed against dust and temporary water immersion 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285CAT12 Brand LED Autolamps Series 285 Series Function Front Direction Indicator only End Caps Chrome clip-on Dimensions 285mm x 25mm x 10mm Mount Type Screw mount clip-on caps Mount Orientation Horizontal and vertical Voltage 12V only IP Rating IP67 Compliance ECE and ADR approved Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits 12V trailers, caravans, and light commercial vehicles requiring a slimline ECE/ADR front direction indicator including: Box trailers and light trailers Caravans and camper trailers Light commercial vehicles and 4WDs Frequently Asked Questions Does this lamp include a park/position lamp function? No the 285CAT12 is an indicator-only lamp. For the version with combined front indicator and park lamp function, refer to the 285CAW12 (12V) or 285CAW24 (24V). Is this lamp 12V or 24V? The 285CAT12 is 12V only. For the 24V indicator-only version, refer to the 285CAT24. How are the mounting screws hidden? The 285 Series uses clip-on chrome end caps that cover the screw positions after mounting, concealing all fasteners for a clean, professional finished appearance. Can this lamp be mounted vertically and horizontally? Yes the 285CAT12 supports both horizontal and vertical mounting orientations, providing flexibility for different trailer and vehicle configurations. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V system compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Front Direction Indicator Chrome Bezel, 285mm, ECE/ADR Approved, IP67. Product Overview The LED Autolamps 285CAT24 is a 24V slimline front direction indicator from the 285 Series the indicator-only 24V variant, without the front position (park) lamp function of the 285CAW24. Designed for 24V commercial trucks, buses, and heavy vehicles requiring a compact, low-profile front amber indicator in the proven 285 Series form factor. Measuring 285mm x 25mm x 10mm with a screw mount and clip-on chrome end caps, the 285CAT24 provides a clean, professional finished appearance with no visible fasteners. ECE and ADR approved, IP67 rated, and capable of both horizontal and vertical mounting. Backed by LED Autolamps' 5-year warranty and supplied as a single unit in blister packaging. Key Specifications Function: Front direction indicator only (no park/position function) Bezel: Chrome with clip-on end caps Dimensions: 285mm x 25mm x 10mm Mount type: Screw mount clip-on chrome caps conceal screws Mount orientation: Horizontal and vertical Voltage: 24V (confirmed by SKU and title see voltage note above) IP rating: IP67 Compliance: ECE and ADR approved Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 285CAT24 Features & Benefits Front direction indicator only: Dedicated amber front indicator function note: no front position/park lamp function. For the version with combined indicator and park, refer to the 285CAW24 Chrome bezel with clip-on end caps: Screw mount fasteners concealed beneath clip-on chrome end caps for a clean, professional finished appearance Slimline 285mm x 25mm x 10mm: Ultra-compact form factor for tight front panel and cab corner mounting on 24V commercial trucks and vehicles Horizontal and vertical mounting: Flexible orientation to suit a wide range of vehicle body configurations ECE and ADR approved: Certified for legal use as a front direction indicator on Australian road vehicles IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion 24V: Designed for 24V commercial vehicle electrical systems 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285CAT24 Brand LED Autolamps Series 285 Series Function Front Direction Indicator only Bezel Chrome clip-on end caps Dimensions 285mm x 25mm x 10mm Mount Type Screw mount clip-on caps Mount Orientation Horizontal and vertical Voltage 24V (confirm with supplier) IP Rating IP67 Compliance ECE and ADR approved Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits 24V commercial trucks, buses, and vehicles requiring a slimline ECE/ADR front direction indicator including: Heavy commercial trucks and prime movers Buses and coaches Commercial vans and 24V light commercial vehicles Frequently Asked Questions Does this lamp include a park/position lamp function? No the 285CAT24 is an indicator-only lamp. For the version with combined front indicator and park lamp function, refer to the 285CAW24 (24V) or 285CAW12 (12V). Is this lamp 12V or 24V? The SKU (285CAT24) and product title both confirm 24V. The supplier features list states "12 Volt" this appears to be a data carry-over error. Confirm voltage with your supplier before purchasing. How are the mounting screws hidden? The 285 Series uses clip-on chrome end caps that cover the screw positions after mounting, concealing all fasteners for a clean finished appearance. Can this lamp be mounted vertically and horizontally? Yes the 285CAT24 supports both horizontal and vertical mounting orientations. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm voltage specification before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Front Indicator & Park Light Chrome Bezel, 285mm, ECE/ADR Approved, IP67. Product Overview The LED Autolamps 285CAW12 is a 12V slimline front direction indicator and front position (park) lamp from the 285 Series the 12V variant of the 285CAW range. Measuring 285mm x 25mm x 10mm, the 285 Series delivers dual front lamp function (indicator and park) in one of the most space-efficient front lamp formats available for trailers, caravans, and light commercial vehicles. The screw mount system with clip-on chrome end caps conceals all fasteners for a clean, professional finished appearance. ECE and ADR approved, IP67 rated, and capable of both horizontal and vertical mounting. Backed by LED Autolamps' 5-year warranty and supplied as a single unit in blister packaging. For the 24V version, refer to the 285CAW24. Key Specifications Functions: Front direction indicator + front position (park) lamp Bezel: Chrome with clip-on end caps Dimensions: 285mm x 25mm x 10mm Mount type: Screw mount clip-on chrome caps conceal screws Mount orientation: Horizontal and vertical Voltage: 12V only IP rating: IP67 Compliance: ECE and ADR approved Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 285CAW12 Features & Benefits Front direction indicator and park lamp: Dual function in a single slimline unit amber indicator output and front position lamp in one 285mm body Chrome bezel with clip-on end caps: Screw mount fasteners concealed beneath clip-on chrome end caps for a clean, professional finished appearance Slimline 285mm x 25mm x 10mm: Ultra-compact form factor suited to tight front panel mounting locations on trailers, caravans, and commercial vehicles Horizontal and vertical mounting: Flexible mounting orientation accommodates a wide range of vehicle and trailer configurations ECE and ADR approved: Certified for legal use as a front direction indicator and park lamp on Australian road vehicles IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285CAW12 Brand LED Autolamps Series 285 Series Functions Front Direction Indicator + Front Position Lamp Bezel Chrome clip-on end caps Dimensions 285mm x 25mm x 10mm Mount Type Screw mount clip-on caps Mount Orientation Horizontal and vertical Voltage 12V only IP Rating IP67 Compliance ECE and ADR approved Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits 12V trailers, caravans, and commercial vehicles requiring slimline ECE/ADR front indicator and park lamps including: Box trailers and light trailers Caravans and camper trailers Light commercial vehicles and 4WDs Frequently Asked Questions What functions does this lamp provide? The 285CAW12 provides two functions front direction indicator (amber flashing) and front position/park lamp (steady) in a single slimline 285mm unit. Is this lamp 12V or 24V? This is the 12V only version. For the 24V version refer to the 285CAW24. How are the mounting screws hidden? The 285 Series uses a screw mount system with clip-on chrome end caps. After mounting with screws, the chrome end caps clip over the screw positions, concealing all fasteners for a clean finished appearance. Can this lamp be mounted vertically and horizontally? Yes the 285CAW12 supports both horizontal and vertical mounting orientations. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V system compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

450mm Pre-Wired 5-Core Tail Light Loom with Load Resistors CS and DT04-6P Plugs, 12V. Product Overview The LED Autolamps 2LR12-450CSB is a pre-wired 5-core 450mm tail light loom with integrated load resistors, designed to adapt standard LED Autolamps rear combination lamps to the patch lead system for use on vehicles with CAN bus lamp failure monitoring. Featuring both CS (Compact Series) and DT04-6P plugs, the 2LR12-450CSB bridges the connection between the rear lamp and the vehicle's patch lead, with the pre-wired load resistors preventing hyper-flash and dashboard error warnings caused by the low current draw of LED lamps. Suited to the LED Autolamps 355 Series and 385 Series rear combination lamps, the installation sequence is: lamp → 2LR12-450CSB loom → vehicle patch lead → factory vehicle plug. Supplied as a single unit two looms are required for a complete left and right lamp installation. This is a 12V only product. Key Specifications Function: 5-core tail light loom with load resistors Loom length: 450mm Connectors: CS plug + DT04-6P plug Load resistors: Pre-wired (2 x 12V) Voltage: 12V only Compatible lamp series: LED Autolamps 355 Series, 385 Series rear combination lamps Pack quantity: Single unit (2 required for pair of lamps) Brand: LED Autolamps SKU: 2LR12-450CSB Features & Benefits Pre-wired load resistors: Two load resistors pre-wired into the loom prevent hyper-flash and dashboard error warnings caused by the low current draw of LED tail lamps on vehicles with CAN bus lamp failure monitoring 5-core loom: Five conductor loom carries stop, tail, indicator, reverse, and earth circuits between the lamp and patch lead 450mm length: Provides sufficient loom length for most tray and trailer rear lamp installations CS and DT04-6P connectors: Dual plug format provides flexibility for different installation configurations CS plug at one end, DT04-6P at the other Suits 355 and 385 Series lamps: Specifically compatible with LED Autolamps 355 Series and 385 Series rear combination lamps in patch lead system configurations Part of the LED Autolamps patch lead ecosystem: Designed to work within the LED Autolamps patch lead system: lamp → loom → patch lead → vehicle factory plug Technical Specs Specification Detail SKU 2LR12-450CSB Brand LED Autolamps Function 5-Core Tail Light Loom with Load Resistors Loom Length 450mm Connectors CS plug + DT04-6P Load Resistors Pre-wired (2 x 12V) Voltage 12V only Compatible Lamps 355 Series, 385 Series Pack Quantity Single unit Compatible With Confirmed compatible lamp series: LED Autolamps 355 Series rear combination lamps LED Autolamps 385 Series rear combination lamps (including 385ARWM-2, previously listed) Frequently Asked Questions How many looms do I need for a complete installation? Two looms are required one per lamp for a complete left and right rear lamp installation. This listing is for a single unit. Why do I need load resistors in this loom? LED tail lamps draw significantly less current than incandescent globes. On vehicles with CAN bus lamp failure monitoring, this low draw can trigger dashboard error warnings or hyper-flash. The pre-wired load resistors simulate the load of the original incandescent lamp to prevent these issues. What vehicle patch lead do I need to complete the installation? The appropriate patch lead depends on your specific vehicle make and model. Contact your LED Autolamps retailer to confirm the correct patch lead for your vehicle. Is this loom compatible with MAXILAMPC3XR or MAXILAMPC3XRWB lamps? The Maxilamp 3 series lamps come with a harness built in you would only need the applicable patch lead for those lamps. The 2LR12-450CSB is designed for 355 and 385 Series lamps that do not have a built-in harness. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less