24V Slimline Recessed Stop/Tail Light 235 Series, Red Lens, ADR Approved, IP67. Product Overview The LED Autolamps 235R24 is a 24V stop/tail light from the 235 Series the red lens, 24V version of the popular slimline recessed strip lamp. Measuring 237mm x 25mm x 3mm (lamp module), the 235R24 recesses into a 203mm x 19mm cutout for a clean flush installation on truck and trailer rear panels. Surface mount brackets are available separately for non-recessed applications. ADR approved, IP67 rated, and supplied with a 40cm cable. The 235R24 is the companion lamp to the 235W24E (reverse, 24V) for complete 24V rear lighting in the 235 Series slimline recessed format. Backed by LED Autolamps' 5-year warranty and supplied as a single unit. Key Specifications Function: Stop and tail Lens: Red Dimensions: 237mm x 25mm x 3mm (lamp module) Cutout required: 203mm x 19mm Cable: 40cm Mount type: Recessed push into cutout with grommet, screw fix. Surface mount brackets available separately IP rating: IP67 Input voltage: 24V only Compliance: ADR approved Warranty: 5 years Brand: LED Autolamps SKU: 235R24 Features & Benefits 24V only: Designed for 24V truck, bus, and commercial trailer applications Slimline recessed design: At just 3mm deep (lamp module), the 235R24 mounts flush within the panel for a clean, professional appearance Red lens stop/tail: Dedicated red lens stop and tail function the standard 235 Series red lamp for 24V rear lighting ADR approved: Certified for stop and tail use on Australian road vehicles and trailers Surface mount brackets available: Optional brackets allow surface mounting without a cutout IP67 waterproof: Completely sealed against dust and temporary water immersion 40cm cable: Pre-wired with a 40cm cable 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 235R24 Brand LED Autolamps Series 235 Series Function Stop and Tail Lens Red Lamp Module Dimensions 237mm x 25mm x 3mm Cutout Required 203mm x 19mm Cable Length 40cm Mount Type Recessed (surface mount brackets available) IP Rating IP67 Input Voltage 24V only Compliance ADR approved Warranty 5 Years Compatible With Suits all 24V trucks, trailers, and commercial vehicles requiring a slimline recessed stop/tail lamp: 24V rigid truck and semi-trailer rear panels Bus and coach rear lighting systems Commercial trailer builders using the 235 Series modular format Frequently Asked Questions Is this lamp 12V or 24V? The 235R24 is 24V only confirmed by the supplier features and the "24" in the SKU. For the 12V equivalent, refer to the 235R12. What cutout size does this lamp require? The 235R24 requires a 203mm x 19mm cutout in the mounting surface for recessed installation. What is the actual depth of this lamp? The lamp module is 3mm deep. The overall installed depth including the mounting grommet is approximately 16–18mm. Can this lamp be surface mounted? Yes surface mount brackets are available separately for applications where a recessed cutout is not practical. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 24V compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Recessed Reverse Light 235 Series, Clear Lens, 12 LEDs, ADR/ECE Approved, IP67. Product Overview The LED Autolamps 235W24E is a 24V slimline recessed reverse light from the versatile 235 Series one of the widest single-function slimline lamp series in the LED Autolamps range. The 235W24E is 24V only, with a clear lens and white LEDs, slimline low-profile recessed design, screw-secured mounting, ADR approved, and a 5-year warranty. The 235W24E comes with a 40cm cable and measures 237mm x 25mm x 3mm (lamp module depth) the 18mm figure in the product title refers to the overall installed depth including the mounting grommet. Recessed mount with surface mount brackets also available. Fit by mounting onto a flat surface, pushing lamp and grommet into a 203mm x 19mm cutout, running wires through the back, and fixing with screws. Refer to ADR 13/00 for mounting instructions. Key Specifications Function: Reverse (white LED) LED count: 12 Lens: Clear Dimensions: 237mm x 25mm x 3mm (lamp module) Installed depth with grommet: Approx. 18mm Cutout required: 203mm x 19mm Cable: 40cm Mount type: Recessed push into cutout, screw fix. Surface mount brackets available separately IP rating: IP67 Input voltage: 24V only Compliance: ADR/ECE approved Warranty: 5 years Brand: LED Autolamps SKU: 235W24E Features & Benefits 24V only: Designed specifically for 24V truck, bus, and commercial trailer applications Slimline recessed design: At just 3mm deep (lamp module), the 235W24E sits flush within the mounting surface for a clean, professional appearance 12 white LEDs: Clear lens with 12 internal white LED squares for bright, wide reverse lamp output ADR/ECE approved: Certified for reverse lamp use on Australian and international road vehicles Surface mount brackets available: Optional surface mount brackets allow the 235W24E to be mounted without a cutout (sold separately) IP67 waterproof: Completely sealed against dust and temporary water immersion 40cm cable: Sufficient cable length for most installation configurations 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 235W24E Brand LED Autolamps Series 235 Series Function Reverse (white LED) LED Count 12 Lens Clear Lamp Module Dimensions 237mm x 25mm x 3mm Installed Depth (with grommet) Approx. 18mm Cutout Required 203mm x 19mm Cable Length 40cm Mount Type Recessed (surface mount brackets available) IP Rating IP67 Input Voltage 24V only Compliance ADR/ECE approved Warranty 5 Years Compatible With Suits all 24V trucks, trailers, and commercial vehicles requiring a slimline recessed reverse lamp: 24V rigid truck and semi-trailer rear panels Bus and coach rear lighting systems Commercial trailer builders using the 235 Series modular format Frequently Asked Questions Is this lamp 12V or 24V? The 235W24E is 24V only. The supplier features "12 Volt or 24 Volt" is a general 235 Series range statement. For the 12V equivalent, refer to the 235W12E. What cutout size does this lamp require? The 235W24E requires a 203mm x 19mm cutout in the mounting surface for recessed installation.  Can this lamp be surface mounted instead of recessed? Yes surface mount brackets are available separately for applications where a recessed cutout is not possible or practical. What are the actual lamp dimensions? The lamp module measures 237mm x 25mm x 3mm. The 18mm figure in the product title refers to the overall installed depth including the grommet. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 24V compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24 Series 12/24V 300mm Interior LED Strip Light Black Housing, 6500K, 18 LEDs, No Switch. Product Overview The LED Autolamps 2430BMB is the black housing, direct-feed version of the 24 Series 300mm interior strip lamp a rigid aluminium construction interior lighting solution for trucks, vans, caravans, and commercial vehicles. The 24 Series interior strip lamp is manufactured with the latest LED technology, producing high light output while consuming very little energy with low current draws making these lamps extremely efficient compared to traditional bulb lamps. Key specifications: 18 LEDs, 269 lumens, 0.26A at 13.8V / 0.14A at 28V, 11mm low-profile depth, 12/24V dual voltage, surface mounted. The black housing suits commercial vehicle interiors and darker-finish builds where a white lamp housing would stand out. The "BMB" suffix denotes Black housing, Multivolt, Bulk supply. Direct-feed no switch included. Backed by LED Autolamps' 3-year warranty. Key Specifications LED count: 18 Lumen output: 269lm LED colour: Cool white (6500K) Housing: Black/grey aluminium Dimensions: 300mm x 25mm x 11mm Switch: Not included direct feed Mount type: Surface mount IP rating: IP67 Input voltage: 12–24V DC (multivolt) Current draw: 0.26A @ 13.8V / 0.14A @ 28V Warranty: 3 years Brand: LED Autolamps SKU: 2430BMB Features & Benefits Black aluminium housing: Rigid aluminium housing withstands knocks and provides a dark, professional appearance suited to commercial vehicle interiors and dark-finish builds 18 LEDs, 269 lumens: High light output with minimal current draw at 0.26A @ 13.8V for efficient interior lighting 6500K cool white: Crisp daylight-style colour temperature for clear, bright interior illumination 12/24V multivolt: Compatible with both 12V and 24V vehicle electrical systems Low profile 11mm depth: Slim enough to fit flush against headliners, ceiling panels, and wall surfaces IP67 rated: Suitable for both interior and exterior applications Direct feed: Connects directly to a switched circuit no inbuilt switch 3-year warranty: Backed by LED Autolamps' 3-year warranty Technical Specs Specification Detail SKU 2430BMB Brand LED Autolamps Series 24 Series LED Count 18 Lumen Output 269lm LED Colour Cool White (6500K) Housing Black/Grey Aluminium Dimensions 300mm x 25mm x 11mm Switch Not included direct feed Mount Type Surface mount IP Rating IP67 Input Voltage 12–24V DC (multivolt) Current Draw 0.26A @ 13.8V / 0.14A @ 28V Warranty 3 Years Compatible With Suits all 12V and 24V interior applications including: Truck cabs and commercial vehicle interiors Caravans and motorhomes Van fit-outs and camper conversions Marine and boat interior lighting Frequently Asked Questions Does this lamp include a switch? No the 2430BMB is direct feed without an inbuilt switch. A switched circuit must be provided for on/off control. What are the dimensions of this lamp? 300mm x 25mm x 11mm the same 300mm length as the standard 1061 series but in the 24 Series aluminium housing format. How many lumens does this lamp produce? 269 lumens at 13.8V a strong output for a compact 300mm interior strip lamp.  What is the difference between the 2430BMB and the 2430WM? Both are 24 Series 300mm interior strip lamps. The 2430BMB has a black/grey housing while the 2430WM has a white housing. Choose based on your preferred interior aesthetic. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V 662mm Interior LED Strip Light 6500K Cool White, No Switch, IP67, Low Profile. Product Overview The LED Autolamps 2460BMB is a 12/24V interior LED strip lamp measuring 662mm x 25mm x 11mm a longer format compared to the standard 300mm (1061) and 600mm (10121) strip lamps from the LED Autolamps range. Featuring high-brightness LEDs delivering 6500K cool white output at a 120-degree spread, the 2460BMB is suited to longer interior spaces in caravans, motorhomes, trucks, and commercial vehicle cabins where a single extended strip provides broad, even illumination. The LED Autolamps strip lamp range features high brightness 120-degree spread, low profile slimline design, IP67 interior/exterior rating, and 12V or 24V compatibility. The 2460BMB is the direct-feed version without a switch a switched circuit is required for on/off control. Surface mount installation remove the bezel at each end and fix to a flat surface. Key Specifications LED colour: Cool white (6500K) Dimensions: 662mm x 25mm x 11mm Switch: Not included direct feed Mount type: Surface mount remove end bezels, fix to flat surface Light spread: 120-degree IP rating: IP67 Input voltage: 12–24V DC (multivolt) Warranty: 1 year (supplier stated see note) Brand: LED Autolamps SKU: 2460BMB Features & Benefits 662mm extended length: Longer format suited to extended interior ceiling spaces, awning channels, and commercial vehicle cabin lighting where standard 300mm or 600mm strips fall short 6500K cool white: Crisp daylight-style colour temperature for clear, bright interior illumination 120-degree light spread: Wide-angle output for broad, even coverage across the interior area below the lamp Low profile 11mm depth: Slim enough to fit flush against headliners, ceiling panels, and wall surfaces IP67 rated: Suitable for both interior and exterior applications 12V and 24V compatible: Suits caravans, motorhomes, trucks, and commercial vehicles across both voltage systems Direct feed: Connects directly to a switched 12V or 24V circuit no inbuilt switch Technical Specs Specification Detail SKU 2460BMB Brand LED Autolamps LED Colour Cool White (6500K) Dimensions 662mm x 25mm x 11mm Switch Not included direct feed Mount Type Surface mount remove end bezels, fix to flat surface Light Spread 120-degree IP Rating IP67 Input Voltage 12–24V DC (multivolt) Warranty 1 Year (supplier stated confirm with retailer) Compatible With Suits all 12V and 24V interior applications including: Caravans and motorhomes Truck cab and commercial vehicle interior lighting Marine and boat interior lighting Toolboxes and canopy lighting Frequently Asked Questions Does this lamp include a switch? No the 2460BMB is direct feed without an inbuilt switch. A switched circuit must be provided for on/off control. Is this lamp suitable for exterior use? Yes IP67 rated for both interior and exterior applications. What is the length of this lamp? 662mm significantly longer than the standard 300mm (1061) and 600mm (10121) strip lamps in the LED Autolamps range, making it suited to extended interior spaces. What voltage systems does this lamp suit? The 2460BMB operates on 12–24V DC, making it compatible with both 12V caravan and motorhome applications and 24V commercial truck systems. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Recessed Indicator Lamp Amber Lens, 3mm Depth, ECE Approved, IP67. Product Overview The LED Autolamps 25A12 is a 12V amber indicator lamp from the 25 Series the amber lens indicator completing the 25 Series range alongside the red 25R12 (stop/tail) and clear 25W12 (reverse). At just 3mm deep and 130mm x 25mm, the 25A12 provides flush recessed amber indicator output in one of the most compact and low-profile lamp formats available. ECE approved under E9 01 2a 6021, IP67 rated, and drawing 0.2A at 12V. Mount horizontally onto a flat surface, push the lamp into a 106mm x 19mm cutout in the mounting surface, and fix with screws supplied at both ends. 12V only. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Amber indicator Lens: Amber Current draw: 0.2A @ 12V Dimensions: 130mm x 25mm x 3mm Cutout required: 106mm x 19mm Mount type: Recessed push into cutout, screw fix at both ends IP rating: IP67 Input voltage: 12V only Compliance: ECE E9 01 2a 6021 Warranty: 5 years Brand: LED Autolamps SKU: 25A12 Features & Benefits Amber indicator: ECE-approved amber indicator output in the ultra-slim 25 Series recessed strip format Ultra-slim 3mm depth: At just 3mm, the 25A12 fits flush into installations with minimal depth clearance behind the panel Recessed mount: Pushes into 106mm x 19mm cutout and fixes with screws at both ends for a clean, flush appearance ECE approved E9 01 2a 6021: Certified for indicator use on Australian and international road vehicles and trailers 0.2A current draw: Low electrical load on the indicator circuit at 12V IP67 waterproof: Completely sealed against dust and temporary water immersion 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 25A12 Brand LED Autolamps Series 25 Series Function Amber Indicator Lens Amber Current Draw 0.2A @ 12V Dimensions 130mm x 25mm x 3mm Cutout Required 106mm x 19mm Mount Type Recessed push into cutout, screw fix at both ends IP Rating IP67 Input Voltage 12V only ECE Compliance E9 01 2a 6021 Warranty 5 Years Compatible With Suits 12V trailers, caravans, and vehicles requiring an ultra-slim recessed amber indicator: Caravans and motorhomes with limited depth clearance at the rear panel Trailer rear panels where flush, low-profile indicator output is required Applications using the 25 Series form factor across stop/tail, indicator, and reverse functions Frequently Asked Questions What cutout size does this lamp require? The 25A12 fits into a 106mm x 19mm cutout consistent with all 25 Series lamps. Is this lamp ECE approved? Yes the 25A12 is ECE approved under E9 01 2a 6021 for indicator use on road vehicles and trailers. How does the 25A12 differ from the 25R12 and 25W12? All three are from the 25 Series in the same 130mm x 25mm x 3mm recessed format. The 25A12 is an amber indicator, the 25R12 is a red stop/tail lamp, and the 25W12 is a clear reverse lamp. Using all three together provides a complete recessed lighting solution in the 25 Series format. What is the current draw of this lamp? 0.2A at 12V a low electrical load suited to standard 12V indicator circuits. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility and cutout dimensions before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Recessed Stop/Tail Lamp Red Lens, 3mm Depth, ECE Approved, IP67. Product Overview The LED Autolamps 25R12 is a 12V stop/tail lamp from the 25 Series the red lens version of the ultra-slim recessed strip lamp range. At just 3mm deep and 130mm x 25mm, the 25R12 is one of the slimmest stop/tail lamps available, designed for flush recessed mounting where depth clearance is critical. Mount onto a flat surface horizontally, run wires through the back, push the lamp into a 106mm x 19mm cutout, and fix with screws supplied at both ends. ECE approved (unlike the reverse variant 25W12 which is ADR approved only), IP67 rated, and 12V only. The red lens delivers stop and tail output in a clean, low-profile recessed format suited to trailers, caravans, and commercial vehicles. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Stop and tail Lens: Red Dimensions: 130mm x 25mm x 3mm Cutout required: 106mm x 19mm Mount type: Recessed push into cutout, screw fix at both ends IP rating: IP67 Input voltage: 12V only Compliance: ECE approved Warranty: 5 years Brand: LED Autolamps SKU: 25R12 Features & Benefits Ultra-slim 3mm depth: At just 3mm, the 25R12 is one of the thinnest stop/tail lamps available ideal for flush installations with minimal depth clearance behind the panel Recessed mount: Pushes into 106mm x 19mm cutout and fixes with screws at both ends for a flush, clean appearance Red lens: Clear red lens for standard stop and tail function output ECE approved: Certified for stop and tail use on Australian and international road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 25R12 Brand LED Autolamps Series 25 Series Function Stop and Tail Lens Red Dimensions 130mm x 25mm x 3mm Cutout Required 106mm x 19mm Mount Type Recessed push into cutout, screw fix at both ends IP Rating IP67 Input Voltage 12V only Compliance ECE approved Warranty 5 Years Compatible With Suits 12V trailers, caravans, and vehicles requiring an ultra-slim recessed stop/tail lamp: Caravans and motorhomes with limited depth clearance at the rear panel Trailer rear panels where a flush, low-profile stop/tail lamp is required Applications where the 25 Series form factor is used across multiple functions Frequently Asked Questions What cutout size does this lamp require? The 25R12 fits into a 106mm x 19mm cutout in the mounting surface. Is this lamp ECE approved? Yes the 25R12 stop/tail function is ECE approved. Note that the 25 Series reverse lamp (25W12) is not ECE approved for the reverse function only ADR approved. What is the depth of this lamp? Just 3mm one of the slimmest stop/tail lamps available, making it ideal for flush installations with minimal rear panel depth clearance. Is there a matching reverse lamp in this series? Yes the LED Autolamps 25W12 is the matching reverse lamp from the 25 Series (previously listed). Note the 25W12 is ADR approved but not ECE approved for the reverse function. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility and cutout dimensions before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Supplementary Reverse Light Recessed Strip, 3mm Depth, ADR Approved, IP67. Product Overview The LED Autolamps 25W12 is a 12V supplementary reverse light from the 25 Series one of the slimmest LED reverse lamps available at just 3mm deep. Featuring a clear lens with white LEDs and a slimline recessed design, the 25W12 mounts flush into a 106mm x 19mm cutout in the mounting surface, providing an extremely low-profile reverse light solution for caravans, trailers, and commercial vehicles where depth clearance is critical. Mount onto a flat surface horizontally, run wires through the back, push the lamp into the cutout (106mm x 19mm) in the mounting surface, and fix with screws supplied at both ends. At 0.16A current draw, the 25W12 is a minimal-load reverse lamp suited to supplementary applications. ADR approved, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single unit. Key Specifications Function: Supplementary reverse light (white LED) Lens: Clear Dimensions: 130mm x 25mm x 3mm Cutout required: 106mm x 19mm Cable: 40cm Current draw: 0.16A @ 12V Mount type: Recessed push into cutout, screw fix at both ends IP rating: IP67 Input voltage: 12V only Compliance: ADR approved (reverse not ECE approved see note) Warranty: 5 years Brand: LED Autolamps SKU: 25W12 Features & Benefits Ultra-slim 3mm depth: At just 3mm, the 25W12 is one of the thinnest LED reverse lamps available ideal for installations with minimal depth clearance Supplementary reverse light: Designed as an additional or supplementary reverse lamp to supplement the primary reverse lamp on the vehicle or trailer Clear lens with white LEDs: Clean, modern clear lens appearance with internal white LEDs Recessed mount: Pushes into 106mm x 19mm cutout and fixes with screws at both ends for a flush, clean appearance with no protruding housing ADR approved: Certified for use as a supplementary reverse light on Australian road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 0.16A current draw: Minimal electrical load on the vehicle's reverse circuit 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 25W12 Brand LED Autolamps Series 25 Series Function Supplementary Reverse Light Lens Clear LED Colour White Dimensions 130mm x 25mm x 3mm Cutout Required 106mm x 19mm Cable Length 40cm Current Draw 0.16A @ 12V Mount Type Recessed push into cutout, screw fix IP Rating IP67 Input Voltage 12V only ADR Compliance ADR approved ECE Compliance Not ECE approved for reverse function Warranty 5 Years Compatible With Suits 12V trailers, caravans, and vehicles requiring an ultra-slim supplementary reverse light: Caravans and motorhomes with limited depth clearance at the rear panel Trailer rear panels where a flush, low-profile reverse lamp is required Applications where the primary reverse lamp is in the combination lamp and a supplementary lamp is desired Frequently Asked Questions Is this lamp ECE approved for the reverse function? No the 25 Series is ECE approved for most functions, but the reverse function is not ECE approved. The 25W12 is ADR approved for supplementary reverse light use. If ECE approval is required for your application, refer to another reverse lamp in the LED Autolamps range.  What cutout size does this lamp require? The 25W12 requires a 106mm x 19mm cutout in the mounting surface. What does "supplementary" reverse light mean? A supplementary reverse light is an additional reverse lamp installed alongside the primary reverse lamp it enhances reverse visibility rather than replacing the main reverse function lamp. Is this lamp 12V or 24V? The 25W12 is 12V only. Do not connect to 24V systems. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Stop/Tail/Indicator with Inbuilt Reflex Reflector ADR/ECE Approved, IP67, PMMA Lens, Single Blister. Product Overview The LED Autolamps 275AR is the 12V only stop/tail/indicator rear combination lamp with inbuilt reflex reflector from the 275 Series the three-function version without a reverse lamp. Within the standard 275 Series, the 275AR and 275MAR are the stop/tail/indicator/reflector variants, while the 275ARWM and 275ARWMB are the stop/tail/indicator/reverse variants. The 275AR is specifically the 12V version for the 12/24V multivolt equivalent, refer to the 275MAR. Featuring a PMMA lens over an ABS base, and measuring 275mm x 100mm x 22mm, the 275AR mounts horizontally with the indicator at the top using bolts in the back of the lamp. ADR and ECE approved, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single unit in blister packaging. Key Specifications Functions: Stop, tail, indicator, inbuilt reflex reflector (no reverse) Lens: PMMA Base: ABS Dimensions: 275mm x 100mm x 22mm Mount type: Horizontal surface mount bolts, indicator at top IP rating: IP67 Input voltage: 12V only Compliance: ADR and ECE approved Warranty: 5 years Pack quantity: Single unit blister pack Brand: LED Autolamps SKU: 275AR Features & Benefits 12V only: Specifically configured for 12V passenger vehicle, caravan, and trailer applications Inbuilt reflex reflector: Combined active LED output and passive reflective compliance in a single unit reduces the need for a separate reflector Three-function combination no reverse: Stop, tail, and indicator without reverse suited to applications where reverse is provided separately PMMA lens: Durable optical-grade PMMA (acrylic) lens for long-term UV resistance and clarity ADR and ECE approved: Legal for stop, tail, and indicator functions on Australian road vehicles and trailers Low profile 22mm depth: Neat installation on trailer rear panels and body work IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 275AR Brand LED Autolamps Series 275 Series Functions Stop, Tail, Indicator, Inbuilt Reflex Reflector Lens PMMA Base ABS Dimensions 275mm x 100mm x 22mm Mount Type Horizontal surface mount bolts, indicator at top IP Rating IP67 Input Voltage 12V only Compliance ADR and ECE approved Warranty 5 Years Pack Quantity Single unit blister pack Compatible With Suits 12V trailers, caravans, and vehicles where a separate reverse lamp is provided: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light commercial vehicles and 4WDs Frequently Asked Questions Does this lamp include a reverse function? No the 275AR is stop/tail/indicator with inbuilt reflector only. For the version with reverse, refer to the 275ARW (12V) or 275ARWM/275ARWMB (12/24V). Is this lamp 12V or 24V? The 275AR is 12V only. For the 12/24V multivolt version with the same functions, refer to the 275MAR. What is the difference between the 275AR and the 275ARM? Both are stop/tail/indicator with inbuilt reflector. The 275ARM is the G2 Series with a diamond lens pattern, black PCB, and lifetime warranty at 12/24V. The 275AR is the standard 275 Series with PMMA lens and 5-year warranty at 12V only. What lens material does this lamp use? The 275AR uses a PMMA (polymethyl methacrylate / optical-grade acrylic) lens durable and UV resistant for long-term outdoor performance. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

275 G2 Series Stop/Tail/Indicator with Inbuilt Reflector Diamond Lens, Black PCB, Lifetime Warranty, 12/24V. Product Overview The LED Autolamps 275ARM is a premium rear combination lamp from the 275 G2 Series one of the most highly specified combination lamps in the LED Autolamps range. Featuring a distinctive diamond lens pattern, black PCB, resin sealed circuitry, inbuilt reflex reflector, and LED Autolamps' industry-leading lifetime warranty, the 275ARM delivers stop, tail, and indicator functions in the proven 275mm x 100mm x 22mm form factor. The 275ARM provides three functions stop, tail, and indicator with an inbuilt reflex reflector without a reverse lamp. For the version with reverse, refer to the 275ARWM (standard series) or 275ARWMB. ADR approved (CRN 38657/38658), IP67 rated, 12V and 24V compatible, stainless steel bolt mounting, and a 28cm pre-wired cable. Compatible with the MFBKT multi-fit bracket (sold separately). Supplied as a single unit in blister packaging. Key Specifications Functions: Stop, tail, indicator, inbuilt reflex reflector (no reverse) Lens: Diamond lens pattern PCB: Black Dimensions: 275mm x 100mm x 22mm Cable: 28cm Mount type: Horizontal surface mount stainless steel bolts, indicator at top IP rating: IP67 Input voltage: 12–24V DC (multivolt) ADR compliance: CRN 38657/38658 Warranty: Lifetime Pack quantity: Single unit blister pack Brand: LED Autolamps SKU: 275ARM Features & Benefits Lifetime warranty: LED Autolamps' premium lifetime warranty significantly exceeding the standard 5-year warranty on most other combination lamps in the range Diamond lens pattern: Premium G2 Series optical design for distinctive, high-visibility lamp output Black PCB: Premium internal PCB construction with resin sealed circuitry for superior durability and moisture protection Inbuilt reflex reflector: Combined active LED output and passive reflective compliance in a single unit Stop, tail, and indicator: Three-function combination without reverse suited to applications where reverse is provided separately Compatible with MFBKT: Works with the LED Autolamps multi-fit bracket for tray vehicle applications Stainless steel fittings: Corrosion-resistant mounting hardware ADR approved CRN 38657/38658: Dual ADR compliance for broad legal coverage IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks Technical Specs Specification Detail SKU 275ARM Brand LED Autolamps Series 275 G2 Series Functions Stop, Tail, Indicator, Inbuilt Reflex Reflector Lens Diamond Lens Pattern PCB Black Dimensions 275mm x 100mm x 22mm Cable Length 28cm Mount Type Horizontal surface mount stainless steel bolts, indicator at top IP Rating IP67 Input Voltage 12–24V DC (multivolt) ADR Compliance CRN 38657/38658 Warranty Lifetime Pack Quantity Single unit blister pack Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring premium ADR-compliant combination rear lighting: Tray vehicles and ute conversions Caravans and camper trailers Commercial trucks and trailers Frequently Asked Questions Does the 275ARM include a reverse function? No the 275ARM provides stop, tail, indicator, and inbuilt reflex reflector functions only. For the version with reverse, refer to the 275ARWM or 275ARWMB. What is the warranty on the 275ARM? The 275ARM carries LED Autolamps' lifetime warranty significantly exceeding the standard 5-year warranty on most other combination lamps in the range. What makes this a G2 Series lamp? The 275 G2 Series features a premium diamond lens pattern, black PCB with resin sealed circuitry, and lifetime warranty differentiating it from the standard 275 Series with its conventional lens design and 5-year warranty. What are the ADR compliance codes for this lamp? The 275ARM is ADR approved under CRN 38657 and CRN 38658. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

275 Series Stop/Tail/Indicator/Reverse 30 LEDs, ECE/ADR Approved, 12/24V, Single Bulk Unit. Product Overview The LED Autolamps 275ARWMB is the bulk single-unit version of the 275 Series stop/tail/indicator/reverse rear combination lamp one of LED Autolamps' most widely specified combination lamps across Australian trailer, caravan, and commercial vehicle applications. Measuring 275mm x 100mm x 22mm, the standard 275 Series is 11mm slimmer than the 275 Triple Series (33mm deep), making it a lower-profile alternative for installations where depth is a consideration. The 275ARWM features 30 high-brightness LEDs with current draw of Stop 0.21A, Tail 0.34A, Indicator 0.12A, Reverse 0.23A at 13.8V and 0.1A, 0.02A, 0.06A, 0.1A respectively at 28V. ECE/ADR approved, IP67 rated, and backed by LED Autolamps' 5-year warranty. Indicator at top when mounting horizontally. Supplied as a single bulk unit without retail blister packaging. Key Specifications Functions: Stop, tail, indicator, reverse LED count: 30 Dimensions: 275mm x 100mm x 22mm Mount type: Horizontal surface mount bolts through hole in fixing surface, indicator at top IP rating: IP67 Input voltage: 12–24V DC (multivolt) Current draw: Stop 0.21A / Tail 0.34A / Indicator 0.12A / Reverse 0.23A @ 13.8V Compliance: ECE/ADR approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 275ARWMB Features & Benefits 30 high-brightness LEDs: High LED count for bright, consistent output across all four functions 22mm low-profile depth: Slimmer than the 275 Triple Series (33mm) for installations where depth clearance is a consideration Four-function combination: Stop, tail, indicator, and reverse in a single 275mm unit ECE/ADR approved: Legal for all four functions on Australian road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 275ARWMB Brand LED Autolamps Series 275 Series Functions Stop, Tail, Indicator, Reverse LED Count 30 Dimensions 275mm x 100mm x 22mm Mount Type Horizontal surface mount bolts, indicator at top IP Rating IP67 Input Voltage 12–24V DC (multivolt) Current Draw Stop 0.21A @ 13.8V / 0.1A @ 28V Current Draw Tail 0.34A @ 13.8V / 0.02A @ 28V Current Draw Indicator 0.12A @ 13.8V / 0.06A @ 28V Current Draw Reverse 0.23A @ 13.8V / 0.1A @ 28V Compliance ECE/ADR approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles: Tray vehicles and ute conversions Caravans and camper trailers Commercial trucks and trailers Frequently Asked Questions What is the difference between the 275ARWMB and the 275GARWMB? The 275ARWMB is the standard 275 Series (22mm deep) while the 275GARWMB is the 275 Triple Series (33mm deep) with a grey housing. Both are stop/tail/indicator/reverse bulk single units. How many LEDs does the 275ARWMB have? 30 high-brightness LEDs distributed across the four functions. Does the indicator face up or down when mounting? Indicator at top when mounting horizontally as specified in the LED Autolamps 275 Series installation instructions. What current does this lamp draw? Stop 0.21A, Tail 0.34A, Indicator 0.12A, Reverse 0.23A at 13.8V. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

275 Series Stop/Tail/Indicator/Reverse 30 LEDs, ECE/ADR Approved, 12/24V, Single Bulk Unit. Product Overview The LED Autolamps 275ARWMB is the bulk single-unit version of the 275 Series stop/tail/indicator/reverse rear combination lamp one of LED Autolamps' most widely specified combination lamps across Australian trailer, caravan, and commercial vehicle applications. Measuring 275mm x 100mm x 22mm, the standard 275 Series is 11mm slimmer than the 275 Triple Series (33mm deep), making it a lower-profile alternative for installations where depth is a consideration. The 275ARWM features 30 high-brightness LEDs with current draw of Stop 0.21A, Tail 0.34A, Indicator 0.12A, Reverse 0.23A at 13.8V and 0.1A, 0.02A, 0.06A, 0.1A respectively at 28V. ECE/ADR approved, IP67 rated, and backed by LED Autolamps' 5-year warranty. Indicator at top when mounting horizontally. Supplied as a single bulk unit without retail blister packaging. Key Specifications Functions: Stop, tail, indicator, reverse LED count: 30 Dimensions: 275mm x 100mm x 22mm Mount type: Horizontal surface mount bolts through hole in fixing surface, indicator at top IP rating: IP67 Input voltage: 12–24V DC (multivolt) Current draw: Stop 0.21A / Tail 0.34A / Indicator 0.12A / Reverse 0.23A @ 13.8V Compliance: ECE/ADR approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 275ARWMB Features & Benefits 30 high-brightness LEDs: High LED count for bright, consistent output across all four functions 22mm low-profile depth: Slimmer than the 275 Triple Series (33mm) for installations where depth clearance is a consideration Four-function combination: Stop, tail, indicator, and reverse in a single 275mm unit ECE/ADR approved: Legal for all four functions on Australian road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 275ARWMB Brand LED Autolamps Series 275 Series Functions Stop, Tail, Indicator, Reverse LED Count 30 Dimensions 275mm x 100mm x 22mm Mount Type Horizontal surface mount bolts, indicator at top IP Rating IP67 Input Voltage 12–24V DC (multivolt) Current Draw Stop 0.21A @ 13.8V / 0.1A @ 28V Current Draw Tail 0.34A @ 13.8V / 0.02A @ 28V Current Draw Indicator 0.12A @ 13.8V / 0.06A @ 28V Current Draw Reverse 0.23A @ 13.8V / 0.1A @ 28V Compliance ECE/ADR approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles: Tray vehicles and ute conversions Caravans and camper trailers Commercial trucks and trailers Frequently Asked Questions What is the difference between the 275ARWMB and the 275GARWMB? The 275ARWMB is the standard 275 Series (22mm deep) while the 275GARWMB is the 275 Triple Series (33mm deep) with a grey housing. Both are stop/tail/indicator/reverse bulk single units. How many LEDs does the 275ARWMB have? 30 high-brightness LEDs distributed across the four functions. Does the indicator face up or down when mounting? Indicator at top when mounting horizontally as specified in the LED Autolamps 275 Series installation instructions. What current does this lamp draw? Stop 0.21A, Tail 0.34A, Indicator 0.12A, Reverse 0.23A at 13.8V. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Mini Jumbo Stop/Tail/Indicator 36 LEDs, Individually Replaceable Modules, ADR/ECE Approved, 12/24V. Product Overview The LED Autolamps 280ARRMB is the stop/tail/indicator version of the 280 Series Mini Jumbo rear combination lamp the three-function variant without reverse. With 36 LEDs total (24 for stop/tail and 12 for indicator), the 280ARRMB delivers bright, consistent output across all three functions in the proven 282mm x 95mm x 28mm Mini Jumbo form factor. A key advantage of the 280 Series is the individually mountable module design. Each module can be individually surface mounted and used as a replacement lamp module for 280 Series Triple Combination Lamps. The modules also serve as replacement lenses for 280 and 420 Series Lamps, reducing maintenance costs by allowing individual module replacement rather than replacing the entire assembly. Key Specifications Functions: Stop, tail, indicator (no reverse) LED count: 36 (24 stop/tail, 12 indicator) Dimensions: 282mm x 95mm x 28mm Individual module dimensions: 91mm x 91mm x 20mm Centre-to-centre mounting: 116mm Cable: 40cm (supplier stated see Red-Flags note) Mount type: Surface mount stainless steel bolts, horizontal IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 280ARRMB Features & Benefits Individually replaceable modules: Each module can be individually surface mounted or used as a replacement lamp module for 280 and 420 Series assemblies reducing maintenance cost when a single module fails 36 LEDs: 24 LEDs for stop/tail and 12 LEDs for indicator for bright, consistent output Three-function no reverse: Stop, tail, and indicator without reverse suited to applications where reverse is provided separately ADR and ECE approved: Legal for all three functions on Australian road vehicles IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 280ARRMB Brand LED Autolamps Series 280 Series Mini Jumbo Functions Stop, Tail, Indicator (no reverse) LED Count 36 (24 stop/tail, 12 indicator) Overall Dimensions 282mm x 95mm x 28mm Module Dimensions 91mm x 91mm x 20mm Centre-to-Centre 116mm Cable Length 40cm (supplier stated verify with retailer) Mount Type Horizontal surface mount stainless steel bolts IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles also suits as replacement modules for: LED Autolamps 280 Series Triple Combination Lamps LED Autolamps 420 Series Lamps Frequently Asked Questions Does this lamp include a reverse function? No the 280ARRMB is stop/tail/indicator only. For the version with reverse, refer to the 280ARWMB. Can the individual lamp modules be replaced separately? Yes each module is individually surface mountable and can be used as a replacement module for 280 Series Triple Combination Lamps. What other lamp series does this module suit as a replacement? The 280 Series modules can be used as replacement lenses for 280 and 420 Series Lamps. How many LEDs does the 280ARRMB have? 36 LEDs total 24 for stop/tail and 12 for indicator. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less