Category 6 Side Direction Indicator Twin Pack Amber Lens, GVM Upgrade, 3M Tape, ECE/EMC, 9–32V. Product Overview The LED Autolamps 77AM2 is the amber coloured lens version of the 77 Series Category 6 side direction indicator twin pack the companion to the clear lens 77ACM2 listed earlier in this session. A twin pack containing left-hand side and right-hand side lamps, with coloured amber lens, Category 6 side direction indicator compliance, multi-volt 12V & 24V, 3M tape fitting design, and ADR approved. The 77AM2 is suitable for vehicle GVM upgrades including the 79 and 200 Series Landcruiser Category 6 side direction indicators in a twin blister pack with ECE approval and 9–32V operation. Cable length 300mm, ECE and EMC approved. Installation: left or right-hand mountable, drill 10mm hole into flat surface and mount horizontally to the ground with 3M tape and serrated plug LEDs must face the rear of the vehicle. Backed by LED Autolamps' 5-year warranty.  Key Specifications Function: Category 6 side direction indicator Lens: Amber (coloured) Pack contents: Left-hand side + right-hand side (twin blister) Dimensions: 77mm x 52mm x 22mm Cable length: 300mm Fitting system: 3M Tape + serrated plug (10mm hole) IP rating: IP67 Input voltage: 9–32V DC (multivolt) LED orientation: LEDs face rear of vehicle Mount: Left or right-hand mountable Compliance: ECE and EMC approved, ADR approved, Category 6 Warranty: 5 years Brand: LED Autolamps SKU: 77AM2 Features & Benefits Category 6 approval: Certified for Category 6 side direction indicator use required for GVM upgrade compliance in Australia Amber coloured lens: Traditional amber tinted lens the coloured lens alternative to the clear lens 77ACM2 GVM upgrade compatible: Suitable for vehicle GVM upgrades including the 79 and 200 Series Landcruiser Twin pack: Contains one left-hand and one right-hand lamp for complete side indicator installation 3M Tape and serrated plug: Fast, tool-minimal fitting drill 10mm hole, plug and tape no visible external fixings 300mm cable: Pre-wired for standard installation configurations ECE and EMC approved: ECE and EMC approved for Australian and international road vehicle compliance  9–32V broad voltage range: Covers all 12V and 24V systems with significant headroom IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 77AM2 Brand LED Autolamps Series 77 Series Function Category 6 Side Direction Indicator Lens Amber (coloured) Pack Contents LHS + RHS (twin blister) Dimensions 77mm x 52mm x 22mm Cable Length 300mm Fitting System 3M Tape + serrated plug (10mm hole) LED Orientation Faces rear of vehicle IP Rating IP67 Input Voltage 9–32V DC (multivolt) Compliance ECE, EMC, ADR Category 6 Warranty 5 Years Compatible With Suits all 12V and 24V vehicles requiring Category 6 side direction indicators: GVM upgrade applications including 79 Series and 200 Series Landcruiser M2-M3, N1 class vehicles over 6 metres, and all N2-N3 class vehicles Side guard mounting applications Frequently Asked Questions What is the difference between the 77AM2 and the 77ACM2? Both are 77 Series Category 6 side direction indicator twin packs. The 77AM2 has an amber coloured lens while the 77ACM2 has a clear lens with internal amber LEDs. All other specifications are identical. Is this lamp suitable for GVM upgrades? Yes suitable for vehicle GVM upgrades including the 79 and 200 Series Landcruiser. Does the twin pack include both left and right-hand lamps? Yes the twin pack contains both left-hand side and right-hand side lamps. Which direction do the LEDs face? LEDs must face the rear of the vehicle confirm orientation before drilling the 10mm mounting hole. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 16 LED Stop/Tail/Indicator Lamp with Black Bracket and Clip-In Lens IP67 Product Overview The LED Autolamps 201BSTIM is a 12/24V rectangular stop, tail, and indicator lamp fitted with 16 LEDs in the 200 series form factor, measuring 200mm x 50mm x 28mm with a black bracket. The clip-in replaceable lens allows for straightforward lens swaps without removing the full housing from its mounting. ADR road approved and rated IP67, backed by a 1-year warranty. Features & Benefits 16 LEDs across three functions — delivers consistent stop, tail, and indicator output in the compact 200 series rectangular form factor Clip-in replaceable lens — lens swaps independently from the housing without removing the lamp from the panel Original rectangular 200 series design — the proven 200mm x 50mm form factor suits trailers, trucks, and tray body rear panels Black bracket — clean, professional finish suits a wide range of trailer and vehicle body aesthetics ADR road approved — meets Australian Design Rules for legal on-road use across stop, tail, and indicator functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Technical Specs Specification Detail SKU 201BSTIM Lamp Type Stop / Tail / Indicator LED Quantity 16 Voltage Range 12V / 24V Dimensions 200mm x 50mm x 28mm Housing Colour Black Lens Clip-in replaceable Mounting Surface mount (bracket included) Protection Rating IP67 Compliance ADR Warranty 1 year Weight 0.2 kg Compatible With / Goes Well With Trailers, tray bodies, trucks, and light commercial vehicles 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail/indicator lighting LED Autolamps 200BRM stop/tail lamp (same 200 series rectangular form factor) LED Autolamps 200BAM indicator lamp (same 200 series rectangular form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 201BSTIM approved for road use in Australia? Yes. The LED Autolamps 201BSTIM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across stop, tail, and indicator functions. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing, allowing it to be replaced without removing the full lamp bracket from the mounting panel — reducing maintenance time and cost in the field. How does the 201BSTIM differ from the 200BARM combination lamp? Both are 200 series rectangular rear combination lamps with black brackets. The 200BARM is 200mm x 92mm wide with 72 LEDs; the 201BSTIM is the standard 200mm x 50mm width with 16 LEDs — suited to applications where a narrower, more compact lamp is required. What is the IP rating on the 201BSTIM? The 201BSTIM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 201BSTIM carry? The 201BSTIM is backed by a 1-year warranty from LED Autolamps — shorter than the 5-year warranty on the standard 200 series lamps; confirm warranty terms with F.A.E. before purchasing. Weight 0.2 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 24V Front Indicator and Position Lamp Surface Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 135CAT124 is a 24V front indicator and position lamp in the same compact 135mm x 38mm x 24mm rectangular form factor as the 135RM and 135WM. Designed for surface mounting on trucks, trailers, and commercial vehicles requiring a 24V front indicator and position light combination, it delivers ADR-approved dual-function output in a single low-profile unit. Rated IP67 and backed by a 5-year warranty. Features & Benefits Front indicator and position light combined — two front lighting functions in a single surface-mount unit, simplifying installation Surface mount — straightforward installation on trailer and truck body front panels ADR road approved — meets Australian Design Rules for legal on-road use as a front indicator and position lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V compatible — designed primarily for 24V heavy transport applications 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 135CAT124 Lamp Type Front Indicator / Position Voltage Range 12V / 24V Dimensions 135mm x 38mm x 24mm Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring 24V front indicator and position lighting 12V and 24V vehicle electrical systems LED Autolamps 135RM stop/tail lamp (same 135 series form factor) LED Autolamps 135WM reverse lamp (same 135 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 135CAT124 approved for road use in Australia? Yes. The LED Autolamps 135CAT124 is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a front indicator and position lamp. What functions does the 135CAT124 cover? It combines front indicator and position light functions in a single surface-mount unit, reducing the number of fittings required on truck and trailer front panels. How does the 135CAT124 fit with other 135 series lamps? The 135CAT124 shares the same 135mm x 38mm x 24mm form factor as the 135RM stop/tail and 135WM reverse lamps, making it a natural match for a consistent lamp style across the full vehicle. What is the IP rating on the 135CAT124? The 135CAT124 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor and transport applications. What warranty does the 135CAT124 carry? The 135CAT124 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 8 Square LED Rear Indicator Lamp Black Base, Pre-Wired, IP67, 5-Year Warranty Product Overview The LED Autolamps 135AM is a 12/24V rear indicator lamp fitted with 8 square LEDs in a black base housing, pre-wired for surface mounting on trailers, trucks, and commercial vehicles. Sharing the same 135 series rectangular form factor as the 135RM stop/tail and 135WM reverse lamps, it delivers ADR-approved rear indicator output certified under CRN39845 and ADR CTA060176. Drawing 0.2A and rated IP67, backed by a 5-year warranty. Features & Benefits 8 square LEDs — distinctive square LED array delivers consistent amber rear indicator output matching the 135RM's visual style Pre-wired surface mount — ready to connect and mount straight out of the blister pack ADR road approved — certified under CRN39845 and ADR CTA060176 for legal on-road use as a rear indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Black base — matches the 135RM and 135WM for a uniform rear lighting appearance Low current draw — 0.2A for efficient operation in multi-lamp trailer builds 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 135AM Lamp Type Rear Indicator LED Configuration 8 square LEDs Voltage Range 12V / 24V Current Draw 0.2A Housing Colour Black Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR — CRN39845 / CTA060176 Packaging Blister pack Warranty 5 years Weight 0.2 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring rectangular surface-mount rear indicator lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear indicator lighting LED Autolamps 135RM stop/tail lamp (same 135 series form factor) LED Autolamps 135WM reverse lamp (same 135 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 135AM approved for road use in Australia? Yes. The 135AM is ADR approved under CRN39845 and CTA060176, meeting Australian Design Rules requirements for legal on-road use as a rear indicator lamp. How does the 135AM complete the 135 series rear lighting set? The 135AM is the rear indicator lamp in the 135 series, complementing the 135RM stop/tail and 135WM reverse lamps — all sharing the same rectangular black base form factor for a consistent rear lighting appearance. What makes the square LED array distinctive? The 8 square LEDs produce a distinctive, evenly spaced pattern across the lamp face that visually matches the 135RM stop/tail, giving the rear lighting set a cohesive, uniform look. What is the IP rating on the 135AM? The 135AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 135AM carry? The 135AM is backed by a 5-year warranty from LED Autolamps. Weight 0.2 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Chrome Steel Rectangular Flange Surround for LED Autolamps 130 & 5940 Series Suits 139x91mm Cutout. Product Overview The LED Autolamps 59401C is a chrome steel rectangular flange surround designed to provide a finished, professional appearance around recessed 130 Series and 5940 Series LED Autolamps lamp modules. When a 130 or 5940 Series lamp is installed into a trailer panel or body surface cutout, the 59401C chrome flange fits around the lamp to cover the cutout edge and deliver a clean, polished result. The required cutout for this flange is 139mm x 91mm with a 23mm radius consistent with the 130 and 5940 Series installation requirements. The 59401C is the chrome version the black steel equivalent is the 59401B. Supplied as a single unit. Key Specifications Function: Chrome steel rectangular flange surround Compatible lamp series: LED Autolamps 130 Series, 5940 Series Material: Chrome steel Cutout size: 139mm x 91mm (23mm radius) Pack quantity: Single unit Brand: LED Autolamps SKU: 59401C Features & Benefits Chrome steel finish: Polished chrome steel surround provides a premium, finished appearance around recessed 130 and 5940 Series rectangular modular lamp cutouts Suits 130 Series and 5940 Series: Compatible with both series sharing the 139mm x 91mm rectangular cutout format Covers the cutout edge: The flange sits over the panel cutout, concealing the cut edge and any gap between the lamp and panel surface Black steel alternative available: The 59401B is the black steel version for builds requiring a darker aesthetic Technical Specs Specification Detail SKU 59401C Brand LED Autolamps Function Chrome Steel Rectangular Flange Surround Compatible Series 130 Series, 5940 Series Material Chrome steel Cutout Size 139mm x 91mm (23mm radius) Pack Quantity Single unit Compatible With Confirmed compatible lamp series: LED Autolamps 130 Series rectangular modular lamps LED Autolamps 5940 Series rectangular modular lamps Frequently Asked Questions What lamp series does the 59401C suit? The 59401C is confirmed for use with the LED Autolamps 130 Series and 5940 Series rectangular modular lamp cutouts. Always confirm your specific lamp series before purchasing. Is the lamp included with this flange? No the 59401C is the flange surround only. The 130 or 5940 Series lamp module is sold separately. What is the difference between the 59401C and the 59401B? The 59401C is chrome steel while the 59401B is black steel. Both suit the same 130 and 5940 Series cutout dimensions. Choose based on your preferred finish. What cutout size does this flange require? The 59401C suits a 139mm x 91mm rectangular cutout with a 23mm radius consistent with the 130 and 5940 Series installation requirements. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm lamp series and cutout dimensions before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

White Front End Outline Marker Twin Pack Non-Fastener Plug & 3M Tape, ADR Approved, 12/24V. Product Overview The LED Autolamps 5025WM2 is a twin blister pack of 5025 Series white front end outline (FEO) markers two lamps per pack for complete left and right front marker installation in a single purchase. The 5025WM2 is a front end outline marker with non-fastener fitting design, low-profile compact form, ADR approved, IP67, 12–24V, 5-year warranty, 50mm x 25mm x 21mm. The 5025 Series uses a unique non-fastener fitting system drill a 10mm hole for the serrated plug, peel the 3M tape backing, and press firmly onto a clean, dry surface. No screws or bolts required. ADR approved under CRN 47203. Supplied as a twin blister pack two white FEO markers per pack. The single bulk unit version is the 5025WMB. Key Specifications Function: White front end outline (FEO) marker Lens: Clear with internal white LEDs Dimensions: 50mm x 25mm x 21mm Fitting system: Non-fastener serrated plug + 3M adhesive tape IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR approved CRN 47203 Warranty: 5 years Pack quantity: 2 (twin blister) Brand: LED Autolamps SKU: 5025WM2 Features & Benefits Twin pack: Two white FEO markers per pack for complete left and right front fitment in a single purchase Non-fastener fitting: Serrated plug and 3M adhesive tape no screws, no bolts, no drilling of fixing holes required saves significant installation time compared to traditional marker lamps Clear lens with white LEDs: Modern clean lens appearance maintaining colour accuracy without UV fading Compact 50mm x 25mm x 21mm: Low-profile form factor for discreet, unobtrusive front panel installation ADR approved CRN 47203: Certified for legal white front end outline marker use on Australian road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 5025WM2 Brand LED Autolamps Series 5025 Series Function White Front End Outline Marker Lens Clear internal white LEDs Dimensions 50mm x 25mm x 21mm Fitting System Non-fastener serrated plug + 3M tape IP Rating IP67 Input Voltage 12–24V DC (multivolt) ADR Compliance CRN 47203 Warranty 5 Years Pack Quantity 2 (twin blister) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring white ADR-compliant front end outline markers: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions How many lamps are in this pack? Two one for each side of the vehicle or trailer front. Is this a front or side marker? This is a white front end outline (FEO) marker the supplier title "White Side Marker" is a naming error confirmed across all verified sources including Carac, MaxiPARTS, and the official LED Autolamps 5025 Series page. What is the ADR compliance code? CRN 47203 confirmed from MaxiPARTS. How is this lamp installed? Drill a 10mm hole for the serrated plug, peel the 3M tape backing, and press firmly onto a clean, dry surface. No screws or bolts required. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stop/Tail/Indicator Combination Lamp Black Housing, 20cm Cable, Single Bulk Unit, ADR/ECE Approved. Product Overview The LED Autolamps 282ARRMB is the bulk single-unit stop/tail/indicator rear combination lamp from the 282 Series the three-function version without a reverse lamp. Sharing the proven 284mm x 100mm x 27mm form factor, black housing, and modern bubble diamond lens of the 282 Series, the 282ARRMB is the non-reverse variant for applications where a separate reverse lamp is provided or not required. The "B" suffix denotes bulk supply a single unit without retail blister packaging, suited to workshops, fleet operators, and trade purchasers. ADR and ECE approved for stop, tail, and indicator functions, IP67 rated, 12V and 24V compatible, with a 20cm pre-wired cable. Mounts horizontally via rear bolts through a 10mm hole in the fixing surface. Backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, indicator (no reverse) Housing colour: Black Lens: Bubble diamond pattern Dimensions: 284mm x 100mm x 27mm Cable: 20cm pre-wired Mount type: Horizontal surface mount rear bolts through 10mm hole IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Pack quantity: Single unit (bulk no retail blister packaging) Brand: LED Autolamps SKU: 282ARRMB Features & Benefits Three-function combination lamp no reverse: Stop, tail, and indicator only suited to applications where a separate reverse lamp is provided or the reverse function is not required Bulk single unit: Individual lamp without retail blister packaging for workshops, fleet, and trade supply Black housing: Modern black finish consistent with the 282 Series range Bubble diamond lens: Distinctive 282 Series curved diamond pattern polycarbonate lens 20cm pre-wired cable: Colour-coded wiring for straightforward connection ADR and ECE approved: Legal for stop, tail, and indicator use on Australian road vehicles IP67 weatherproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 282ARRMB Brand LED Autolamps Series 282 Series Functions Stop, Tail, Indicator (no reverse) Housing Colour Black Lens Bubble diamond pattern Dimensions 284mm x 100mm x 27mm Cable Length 20cm Mount Type Horizontal surface mount rear bolts, 10mm hole IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring combination rear lighting without reverse including: Trailers where reverse is provided separately Caravans and camper trailers Box trailers and light commercial trailers Frequently Asked Questions Does this lamp include a reverse function? No the 282ARRMB provides stop, tail, and indicator functions only. For the version with reverse, refer to the 282ARWMB (single bulk) or 282ARWM (blister pack). What is the difference between the 282ARRMB and the 282ARWMB? Both are single bulk units in the same 282 Series form factor. The 282ARRMB is stop/tail/indicator only (no reverse) while the 282ARWMB includes a reverse function. What does the "B" suffix mean? The "B" suffix denotes bulk supply a single unit without retail blister packaging, suited to trade and workshop supply. How is this lamp mounted? Mount horizontally using the bolts in the rear of the lamp through a 10mm hole in the fixing surface. Refer to ADR 13/00 for mounting position and height requirements. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Side Direction Indicator 3 LEDs, Clip-In Replaceable Lens, IP67 Product Overview The LED Autolamps 58AM is a 12/24V amber side direction indicator lamp with 3 LEDs and a clip-in replaceable lens, measuring 58mm x 35mm x 21mm in a black housing with a 28mm centre-to-centre mount. The same compact form factor as the 58ARM, it is purpose-built for side indicator use and approved under CRN38277 and ADR 6/00. Pre-wired, IP67 rated, and backed by a 5-year warranty. Features & Benefits 3 LED amber indicator output — clean, compliant amber side direction indicator function Clip-in replaceable lens — lens swaps independently without removing the full lamp housing from the panel Compact 58mm x 35mm form factor — low-profile surface mount suits a wide range of trailer and truck body side positions ADR approved — certified under CRN38277 and ADR 6/00 for legal on-road use as a side direction indicator IP67 rated — fully sealed against dust and water immersion Pre-wired — ready to connect on installation 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 58AM Lamp Type Side Direction Indicator LED Quantity 3 LED Colour Amber Housing Colour Black Voltage Range 12V / 24V Dimensions 58mm x 35mm x 21mm Mount Centre-to-Centre 28mm Current Draw 0.1A @ 13.8V Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR 6/00 — CRN38277 Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring side direction indicator lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 58ARM red/amber side marker (same 58mm x 35mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 58AM approved for road use in Australia? Yes. The 58AM is ADR approved under CRN38277 and ADR 6/00, meeting Australian Design Rules requirements for legal on-road use as a side direction indicator lamp. How does the 58AM differ from the 58ARM? The 58AM is an amber-only side direction indicator certified under ADR 6/00, while the 58ARM is a red/amber dual-colour side marker certified under ADR 45/01. Both share the same 58mm x 35mm x 21mm form factor, clip-in lens, and 0.1A current draw. What does the clip-in lens mean for maintenance? The lens clips out independently, allowing replacement without removing the full lamp housing — reducing maintenance time and cost. What is the IP rating on the 58AM? The 58AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 58AM carry? The 58AM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Red Rear End Outline Marker Twin Pack No-Fastener Fit, 50x25mm, IP67 Product Overview The LED Autolamps 5025RM2 is a red rear end outline marker lamp supplied as a twin blister pack, measuring 50mm x 25mm x 21mm with a non-fastener fitting design that eliminates the need for screws or fixings during installation. The compact, low-profile form factor suits a wide range of trailer, caravan, and truck body edge-marking applications. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Non-fastener fitting design — installs without screws or fixings, saving time and simplifying installation on trailer and caravan body panels Twin blister pack — both lamps supplied for a complete left and right installation Low-profile compact 50mm x 25mm form factor — suits tight edge-marking positions on trailer bodies and caravans ADR approved — meets Australian Design Rules for legal on-road use as a rear end outline marker IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 5025RM2 Pack Contents 2 lamps Lamp Type Rear End Outline Marker LED Colour Red Voltage Range 12V / 24V Length 50mm Width 25mm Depth 21mm Mounting Non-fastener (no screws required) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring compact rear end outline marker lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear marker lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 5025RM2 approved for road use in Australia? Yes. The 5025RM2 is ADR approved, meeting Australian Design Rules requirements for legal on-road use as a rear end outline marker lamp. How does the non-fastener fitting work? The lamp is designed to fit without screws or traditional fasteners — it clips or presses into the mounting position, significantly reducing installation time compared to screw-mounted markers. What does the twin blister pack include? The pack contains two lamps for a complete left and right rear end outline marker installation. What is the IP rating on the 5025RM2? The 5025RM2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 5025RM2 carry? The 5025RM2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 101BAR2 12V Stop Tail Indicator Lamp with Reflector Twin Blister Pack A twin blister pack of budget 12V LED stop, tail, indicator, and reflector trailer lamps with IP67 rating and ECE road approval, the LED Autolamps 101BAR2 features 8 LEDs per lamp, a low-profile 100 x 100 x 22mm surface mount black housing, and a 40cm pre-wired cable, backed by a 5-year warranty. Product Overview The LED Autolamps 101BAR2 is the twin blister pack version of the 101BAR budget LED stop, tail, indicator, and reflector lamp designed for 12V trailer applications. Each lamp in the twin pack is identical to the 101BAR, measuring 100 x 100 x 22mm in a low-profile black housing with surface mount installation. Eight LEDs provide stop, tail, and indicator illumination alongside an integrated reflector. Current draw is 0.13A for stop, 0.04A for tail, and 0.12A for indicator at 13.8V. A 40cm pre-wired cable is included on each lamp. IP67 rated for waterproof and dustproof protection. ECE road approved with individual compliance numbers for stop/tail, indicator, and reflector functions. Supplied as a twin blister pack for complete left and right trailer lamp replacement or new installation. Features & Benefits Twin Pack for Complete Trailer Lamp Installation: The 101BAR2 is supplied as a twin blister pack, providing both left and right lamps in a single purchase for a complete trailer rear lamp installation or replacement. Budget Trailer Lamp with Stop, Tail, Indicator, and Reflector Functions: Each lamp combines stop, tail, indicator, and reflector functions in a single low-profile unit, reducing the number of individual lamp assemblies required on budget trailer builds and replacements. ECE Road Approved: Each lamp holds ECE road approval for stop/tail (S1-E9-02), indicator (2a-E9-01), and reflector (1A-E9-02) functions, confirming suitability for on-road trailer use. IP67 Waterproof and Dustproof Rating: The IP67 rating provides full dust protection and waterproof protection against temporary immersion, suited to exposed trailer mounting locations in all weather conditions. Low-Profile Black Housing: The low-profile 22mm depth black housing minimises protrusion from the trailer body surface, providing a compact and practical installation solution for budget trailers and caravans. 8 LEDs per Lamp: Eight LEDs per lamp provide the illumination required for stop, tail, and indicator functions, delivering reliable visibility for following traffic on road and in trailer applications. 40cm Pre-Wired Cable per Lamp: Each lamp is supplied with a 40cm pre-wired cable for direct connection to the trailer wiring harness. 12V Only: The 101BAR2 is designed for 12V DC trailer and vehicle electrical systems only. 5-Year Warranty: The 101BAR2 is backed by a 5-year LED Autolamps warranty. Technical Specs Specification Detail SKU 101BAR2 Brand LED Autolamps Function Stop, Tail, Indicator, Reflector Light Type LED LED Quantity 8 per Lamp Input Voltage 12V DC Current Draw - Stop 0.13A at 13.8V Current Draw - Tail 0.04A at 13.8V Current Draw - Indicator 0.12A at 13.8V Dimensions 100mm x 100mm x 22mm Housing Colour Black Mount Surface Mount Cable Length 40cm per Lamp IP Rating IP67 ECE Stop/Tail Approval S1-E9-02 ECE Indicator Approval 2a-E9-01 ECE Reflector Approval 1A-E9-02 Pack Quantity 2 Lamps Packaging Twin Blister Weight per Lamp 0.16kg Warranty 5 Years Compatible With The 101BAR2 is compatible with 12V DC trailer and vehicle electrical systems only. ECE road approved for on-road trailer use. Confirm mounting dimensions and wiring requirements for your specific trailer before purchase. The single bulk boxed version is available as the 101BAR. Frequently Asked Questions How many lamps are included in the 101BAR2 pack? The 101BAR2 is a twin blister pack containing two lamps, providing both left and right lamps for a complete trailer rear lamp installation or replacement in a single purchase. What is the difference between the 101BAR2 and the 101BAR? Both are the same lamp with identical specifications. The 101BAR2 is supplied as a twin blister pack for retail display, while the 101BAR is supplied individually in bulk boxed packaging. Is the 101BAR2 compatible with 24V systems? No. The 101BAR2 is designed for 12V DC systems only. Confirm your trailer's operating voltage before purchase. Is the 101BAR2 ECE approved for on-road use? Yes. Each lamp in the 101BAR2 pack holds ECE road approval for stop/tail (S1-E9-02), indicator (2a-E9-01), and reflector (1A-E9-02) functions, confirming suitability for on-road trailer use. Does the 101BAR2 include an integrated reflector? Yes. Each lamp includes an integrated reflector function alongside stop, tail, and indicator functions, with ECE reflector approval (1A-E9-02).Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Stop/Tail/Indicator/Reverse Lamp Twin Pack with Inbuilt Reflex Reflector IP67 Product Overview The LED Autolamps 223BARM2 is a 12/24V rear combination lamp twin pack covering stop, tail, indicator, reverse, and integrated reflex reflector functions supplied as a pair for a complete left and right rear installation. The easy mounting design and inbuilt reflex reflector make it a practical, compliant all-in-one rear lighting solution for trailers, trucks, and commercial vehicles. ADR Australian road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Twin pack — both lamps supplied for a complete left and right rear installation in a single purchase Stop, tail, indicator, reverse, and reflector in one lamp — five functions in a single unit, reducing wiring complexity and fitting count Inbuilt reflex reflector — integrated passive reflective element for additional rear visibility and compliance Easy mounting design — designed for straightforward installation on trailer and truck body rear panels ADR Australian road approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 223BARM2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reverse / Reflector Voltage Range 12V / 24V Reflector Inbuilt reflex Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a full-function rear combination lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear combination lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 223BARM2 approved for road use in Australia? Yes. The 223BARM2 is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use across all five functions. What does the inbuilt reflex reflector provide? The integrated reflex reflector is a passive element that reflects light from other vehicles back towards the source, adding rear visibility and passive compliance without requiring a separate reflector unit. What functions does the 223BARM2 cover? It combines stop, tail, indicator, reverse, and reflector functions in a single lamp — a complete rear lighting solution for trailers and trucks in one unit per side. What is the IP rating on the 223BARM2? The 223BARM2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 223BARM2 carry? The 223BARM2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

White LED Front End Outline Marker Black Steel Bezel, Clear Lens, ADR Approved, 12/24V. Product Overview The LED Autolamps 86BWM is a white LED front end outline (FEO) marker lamp from the 86B series the white version of the popular 86B family, sharing the same proven black stainless steel bezel, clear polycarbonate lens with internal coloured LEDs, ultra-slim 2.5mm depth, and 14mm x 12mm form factor as the amber 86BARM and 86AMB. ADR approved (CTA046897) and rated for 12–24V multivolt operation, the 86BWM provides legal white front end outline marker compliance in an ultra-low profile format suited to trailer frames, cab corners, and body panels where a discreet, professional white marker is required. The black steel bezel provides corrosion resistance for coastal and outback environments. Backed by LED Autolamps' 5-year warranty and supplied as a single unit in blister packaging. Key Specifications Function: White front end outline (FEO) marker LED colour: White Lens: Clear polycarbonate with internal white LEDs Bezel material: Black steel Housing colour: Black Dimensions: 14mm (W) x 12mm (H) x 2.5mm (D) Mount type: Surface mount IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR approved CTA046897 Warranty: 5 years Weight: 0.05kg Packaging: Blister pack single unit Brand: LED Autolamps SKU: 86BWM Features & Benefits White LED front end outline marker: ADR compliant white FEO output through a clear lens with internal white LEDs for front end outline marking on trailers and commercial vehicles Black steel bezel: Corrosion-resistant steel bezel in black finish withstands coastal salt spray, outback dust, and road grime more durable than chrome plastic alternatives Clear lens with internal white LEDs: Maintains colour accuracy and brightness without UV fading or lens discolouration over time Ultra-slim 2.5mm profile: Extremely low depth for nearly flush mounting on trailer frames, body panels, and cab corners ADR approved CTA046897: Certified for legal white front end outline marker use on Australian road vehicles and trailers 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial trucks IP67 weatherproof: Fully sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 86BWM Brand LED Autolamps Series 86B Series Function White Front End Outline Marker LED Colour White Lens Clear polycarbonate (internal white LEDs) Bezel Material Black Steel Housing Colour Black Dimensions 14mm (W) x 12mm (H) x 2.5mm (D) Mount Type Surface mount IP Rating IP67 Input Voltage 12–24V DC (multivolt) ADR Compliance CTA046897 Warranty 5 Years Weight 0.05kg Packaging Blister Pack single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring white ADR-compliant front end outline markers including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions Is this lamp ADR approved for white front end outline marking? Yes the 86BWM is ADR approved under CTA046897, confirming it meets Australian legal requirements for white front end outline marker use on trailers and road vehicles. How does the 86BWM differ from the 86AMB? The 86BWM emits white light for front end outline marker applications while the 86AMB emits amber light for side marker applications. Both share the same 86B series dimensions (14mm x 12mm x 2.5mm) and black bezel construction. Why does a clear lens produce white light? The clear lens design uses internal white LEDs to produce the light output, rather than relying on a tinted lens. This approach maintains consistent colour accuracy and brightness over time without the UV fading associated with traditional tinted lenses. What voltage systems does this lamp suit? The 86BWM operates on 12–24V DC, making it compatible with both 12V passenger and caravan trailer applications and 24V commercial truck systems. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less