ADR 48/00 Approved 12/24V Licence Plate Lamp Black Bracket, 40cm Wire, One Lamp for Compliance Product Overview The LED Autolamps 35BLM is a 12/24V LED licence plate lamp with a black bracket and 40cm pre-wired lead, measuring 76mm x 42mm x 30mm with a 64mm centre-to-centre mount. Like the 35CLM, only one lamp is required to meet ADR 48/00 compliance making it a simple, no-over-specification installation. The black bracket gives it a clean, practical appearance suited to a wide range of trailer and vehicle rear panel styles. Drawing just 0.02A at 13.8V, IP67 rated. Features & Benefits Black bracket — clean finish suits a wide range of trailer and vehicle rear panel aesthetics 40cm pre-wired cable — longer lead than the 30 series (0.14m) for more flexible routing to the number plate One lamp required for ADR compliance — a single 35BLM satisfies ADR 48/00 requirements White LED output — bright, clear white light for effective number plate illumination ADR 48/00 approved — meets Australian Design Rules for legal on-road use as a licence plate lamp IP67 rated — fully sealed against dust and water immersion Very low current draw — 0.02A at 13.8V 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 64mm centre-to-centre mount — confirm against your bracket before installation Technical Specs Specification Detail SKU 35BLM Lamp Type Licence Plate Light LED Colour White Voltage Range 12V – 24V Dimensions 76mm x 42mm x 30mm Mount Centre-to-Centre 64mm Current Draw 0.02A @ 13.8V Cable Length 0.4m Housing Colour Black Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 ADR Note One lamp required for compliance Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ADR 48/00 compliant licence plate illumination 12V light vehicles and 24V heavy transport applications LED Autolamps 35CLM (same single-lamp compliance concept, different bracket finish) LED Autolamps 30BLM (two-lamp compliance variant — smaller 65mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 35BLM lamps are required for ADR compliance? Only one lamp is required to meet ADR 48/00 compliance — a single 35BLM provides a fully compliant number plate light installation. How does the 35BLM differ from the 35CLM? The 35BLM has a black bracket and a 40cm cable, while the 35CLM's bracket colour was not confirmed. Both share the same single-lamp ADR compliance, 76mm x 42mm form factor, and 0.02A current draw What colour light does the 35BLM produce? The 35BLM produces white LED output for clear, effective number plate illumination. What is the IP rating on the 35BLM? The 35BLM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor trailer and vehicle mounting. What warranty does the 35BLM carry? Warranty information was not confirmed in available supplier data Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 48/00 Approved 12/24V Licence Plate Lamp Chrome Base, Twin Blister, Two Required for Compliance Product Overview The LED Autolamps 30CLM is a 12/24V chrome base licence plate lamp in a compact 65mm x 30mm x 24mm steel housing, supplied as a twin blister pack. Unlike the 35CLM which requires only one lamp for ADR compliance, the 30CLM requires two lamps to meet ADR 48/00 requirements both units in the twin pack are needed for a compliant installation. Drawing just 0.02A at 13.8V, it is pre-wired with a 0.14m cable and has a 65mm centre-to-centre mount spacing. Rated IP67 and backed by a 5-year warranty. Features & Benefits Chrome base — premium finish for trailer and vehicle rear panel installations Steel housing — robust metal construction for durability in demanding transport environments Twin blister pack — both lamps supplied; both are required for ADR 48/00 compliance ADR 48/00 approved — meets Australian Design Rules for licence plate illumination; two lamps required for compliance IP67 rated — fully sealed against dust and water immersion Very low current draw — 0.02A at 13.8V for near-zero impact on vehicle electrical systems 0.14m pre-wired cable — compact cable lead for clean installation near the number plate 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 30CLM Lamp Type Licence Plate Light Voltage Range 12V – 24V Dimensions 65mm x 30mm x 24mm Mount Centre-to-Centre 65mm Current Draw 0.02A @ 13.8V Cable Length 0.14m Housing Steel, chrome base Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 ADR Note Two lamps required for compliance Packaging Blister pack (2 lamps) Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ADR 48/00 compliant licence plate illumination 12V light vehicles and 24V heavy transport applications LED Autolamps 35CLM licence plate light (single-lamp ADR compliant alternative) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 30CLM lamps are required for ADR compliance? Two lamps are required to meet ADR 48/00 compliance — the twin blister pack supplies both, so a single pack purchase provides a fully compliant installation. Is the 30CLM approved for road use in Australia? Yes. The 30CLM is ADR 48/00 approved, meeting Australian Design Rules requirements for legal on-road use as a licence plate lamp — when two units are fitted as specified. How does the 30CLM differ from the 35CLM? The 30CLM requires two lamps for ADR compliance and has a chrome base steel housing at 65mm x 30mm, while the 35CLM requires only one lamp and measures 76mm x 42mm. Both are ADR-approved licence plate lamps — choose based on your vehicle's mounting configuration and aesthetic preference. What is the current draw of the 30CLM? The 30CLM draws just 0.02A at 13.8V — an extremely low current that has virtually no impact on the vehicle's electrical system. What warranty does the 30CLM carry? The 30CLM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Sequential Amber Indicator Strip Clear Lens, Ultra-Slim 3mm, 40cm Cable Product Overview The LED Autolamps 235CSEQ-2 is the clear lens variant of the 235ASEQ-2 sequential indicator strip delivering the same sweeping sequential flash pattern in the same 237mm x 25mm x 3mm ultra-slim form factor, but with a clear lens that presents a clean, colourless appearance when inactive. Supplied with a 40cm cable lead for installation flexibility. ECE approved and rated IP67, backed by a 5-year warranty. Features & Benefits Clear lens — clean, modern colourless appearance when inactive; amber sequential output activates when the lamp is energised Sequential indicator — LEDs sweep progressively across the strip, creating a directional effect for improved conspicuity and a premium appearance Ultra-slim 3mm depth — flush recessed mount for a clean, integrated finish on trailer and caravan rear panels 40cm cable included — pre-wired lead for flexible installation routing Recessed fitting — primary mount for a flush finish; optional surface mount brackets available ECE approved — meets international road approval standards for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 235CSEQ-2 Lamp Type Sequential Indicator Strip Lens Colour Clear Voltage 12V Dimensions 237mm x 25mm x 3mm Cable Length 400mm Mounting Recessed (surface mount brackets available) Protection Rating IP67 Compliance ECE Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring sequential indicator lighting with a clear lens finish 12V trailer and vehicle electrical systems LED Autolamps 235ASEQ-2 amber lens sequential indicator strip (same dimensions, amber lens) LED Autolamps 235R12 stop/tail strip lamp (same 237mm form factor) LED Autolamps surface mount bracket accessories (confirm availability with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 235CSEQ-2 approved for road use in Australia? Yes. The 235CSEQ-2 is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as an indicator lamp. How does the 235CSEQ-2 differ from the 235ASEQ-2? The 235CSEQ-2 has a clear lens that appears colourless when inactive, while the 235ASEQ-2 has a traditional amber lens. Both are sequential indicator strips in the same 237mm x 25mm x 3mm form factor — choose based on the aesthetic preferred for inactive appearance. What does sequential indicator mean? The sequential indicator sweeps its LEDs progressively across the strip in a directional wave, rather than flashing uniformly — creating a more visible and distinctive indicator signal. Can the 235CSEQ-2 be surface mounted? Yes. While primarily designed for recessed fitting, optional surface mount brackets are available. Contact F.A.E. to confirm compatible bracket accessories. What warranty does the 235CSEQ-2 carry? The 235CSEQ-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Sequential Amber Indicator Strip 10 LEDs, Ultra-Slim 3mm, IP67 Product Overview The LED Autolamps 235ASEQ-2 is a 12V sequential indicator strip light fitted with 10 amber LEDs, designed for a sleek, modern sweeping indicator effect on trailers, caravans, and custom vehicle builds. Measuring 237mm x 25mm at just 3mm deep, it is one of the thinnest indicator solutions in the LED Autolamps range suitable for recessed fitting or surface mounting with optional brackets. ECE approved and rated IP67, backed by a 5-year warranty. Supplied as a blister pack. Features & Benefits Sequential indicator — LEDs sweep progressively rather than flashing uniformly, creating a modern, premium appearance and improved conspicuity 10 amber LEDs — delivers correct amber indicator output across the full 237mm strip face Ultra-slim 3mm depth — among the thinnest indicator lamp options available; suits recessed fitting in tight panel spaces Recessed fitting — primary mounting for a flush, integrated finish Surface mount brackets available — optional surface mount accessories for installations where recessed fitting is not possible ECE approved — meets international road approval standards for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 235ASEQ-2 Lamp Type Sequential Indicator Strip LED Quantity 10 amber Voltage 12V Dimensions 237mm x 25mm x 3mm Mounting Recessed (surface mount brackets available) Protection Rating IP67 Compliance ECE Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and custom vehicle builds requiring sequential indicator lighting 12V trailer and vehicle electrical systems ECE-approved indicator lighting for road-legal sequential indicator applications LED Autolamps surface mount bracket accessories (confirm availability with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 235ASEQ-2 approved for road use in Australia? Yes. The 235ASEQ-2 is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as an indicator lamp. What does sequential indicator mean? Rather than flashing on and off uniformly, the sequential indicator sweeps its 10 LEDs progressively across the strip — creating a directional sweeping effect that is both visually distinctive and improves visibility to following drivers. How thin is the 235ASEQ-2? At just 3mm deep, the 235ASEQ-2 is an ultra-slim strip lamp — suited to recessed fitting in tight panel spaces where conventional indicator lamps would not fit. Can the 235ASEQ-2 be surface mounted? Yes. While primarily designed for recessed fitting, optional surface mount brackets are available. Contact F.A.E. to confirm compatible bracket accessories. What warranty does the 235ASEQ-2 carry? The 235ASEQ-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V LED Licence Plate Light One Lamp Required for Compliance Product Overview The LED Autolamps 35CLM is a 12/24V LED licence plate light measuring 76mm x 42mm x 30mm, ADR road approved for legal on-road use on trailers and vehicles. A single lamp is all that is required to meet ADR compliance requirements making it a straightforward, no-over-specification installation for trailers, tray bodies, and commercial vehicles. Rated IP67 and designed for surface mounting, compatible with both 12V and 24V electrical systems. Features & Benefits ADR road approved — meets Australian Design Rules for legal on-road use as a licence plate light One lamp required for ADR compliance — a single 35CLM satisfies the ADR requirement; no need to fit two lamps IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Compact 76mm x 42mm form factor — suits a wide range of trailer and vehicle rear panel installations 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Technical Specs Specification Detail SKU 35CLM Lamp Type Licence Plate Light Voltage Range 12V / 24V Dimensions 76mm x 42mm x 30mm ADR Compliance One lamp required Mounting Surface mount Protection Rating IP67 Compliance ADR Compatible With / Goes Well With Trailers, tray bodies, trucks, and commercial vehicles requiring ADR-compliant licence plate lighting 12V light vehicles and 24V heavy transport applications LED Autolamps rear combination lamps (for trailer builds requiring a separate licence plate light) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 35CLM approved for road use in Australia? Yes. The LED Autolamps 35CLM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a licence plate light. How many 35CLM lamps are required for ADR compliance? Only one lamp is required to meet ADR licence plate lighting compliance — the 35CLM is designed so a single unit satisfies the regulatory requirement. What is the IP rating on the 35CLM? The 35CLM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Does the 35CLM work on both 12V and 24V systems? Yes. It operates across 12V to 24V, making it compatible with light vehicles as well as 24V heavy transport applications without any modification. What warranty does the 35CLM carry? Warranty information was not confirmed in available supplier data — contact F.A.E. or LED Autolamps to confirm before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Ultra-Compact 12V Amber Side Marker Lamp Twin Pack 58mm, IP67, Screw Mount, 5-Year Warranty Product Overview The LED Autolamps 16A12-2 is a 12V amber side marker lamp supplied as a twin blister pack, in the same ultra-compact 58mm x 16mm x 13mm form factor as the rest of the 16 series. Designed for side marker applications on trailers, trucks, and commercial vehicles where a discreet, low-profile amber marker is required. Road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Amber LED output — delivers correct amber side marker output for lateral visibility on trailers and commercial vehicles Twin blister pack — both lamps supplied for a complete left and right side marker installation Smallest marker lamp in the LED Autolamps range — at 58mm x 16mm x 13mm, fits where standard side markers won't Sleek streamlined design — low-profile rectangular form factor blends cleanly into vehicle body panels Easy fit screw mount — straightforward single-screw installation on trailer and truck body panels Road approved — meets road approval standards for legal on-road use as a side marker lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 16A12-2 Pack Contents 2 lamps (twin) Lamp Type Side Marker LED Colour Amber Voltage Range 12V / 24V Dimensions 58mm x 16mm x 13mm Mounting Screw mount Protection Rating IP67 Compliance Road approved Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ultra-compact amber side marker lamps 12V and 24V vehicle electrical systems LED Autolamps 181AME amber side marker (standard round recessed variant) LED Autolamps 16R12-2 rear position marker (same 16 series form factor) LED Autolamps 16W12-2 front outline marker (same 16 series form factor) LED Autolamps wiring harnesses and lighting accessories Frequently Asked Questions Is the 16A12-2 approved for road use in Australia? Yes. The 16A12-2 is road approved, meeting the standards required for legal on-road use as a side marker lamp. What makes the 16A12-2 different from the 181AME amber side marker? The 16A12-2 is 58mm x 16mm x 13mm rectangular with a screw mount and comes as a twin pack, while the 181AME is a 28mm round mini recessed marker. The 16A12-2 suits panel surface mounting; the 181AME suits flush recessed installations. What does the twin blister pack include? The twin blister pack contains two lamps for a complete left and right side marker installation in a single purchase. What is the IP rating on the 16A12-2? The 16A12-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor trailer and truck body mounting. What warranty does the 16A12-2 carry? The 16A12-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Round Work/Reverse Flood Lamp 4x3W LEDs, 489lm, ECE/ADR 1/00 Approved, 12/24V. Product Overview The LED Autolamps 7512BM is a compact round work and reverse flood lamp from the 7512 Series a dual-purpose lamp providing both high-output work lamp illumination and ECE/ADR 1/00 reverse lamp compliance in a single compact 75mm x 75mm x 30mm unit. The 7512 Series features ECE/ADR 1/00 reverse approval, high light output flood beam, 4x3W high-brightness LEDs, IP67, 12–24V, 75mm x 75mm x 30mm, 5-year warranty.  The 7512BM delivers 489lm effective (660lm raw), 0.59A current draw at 13.8V / 0.27A at 28V, and includes a 40cm cable in a single blister pack. Fixed to mounting surface using stainless steel hardware supplied. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Work lamp (flood beam) + reverse lamp (ECE/ADR 1/00) LED count: 4 x 3W (12W total) Beam type: Flood Lumen output: 489lm effective / 660lm raw Dimensions: 75mm x 75mm x 30mm Cable: 40cm Current draw: 0.59A @ 13.8V / 0.27A @ 28V Mount type: Surface mount stainless steel hardware supplied IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE/ADR 1/00 (reverse) Warranty: 5 years Packaging: Single blister Brand: LED Autolamps SKU: 7512BM Features & Benefits Dual purpose work lamp and reverse: Functions as both a high-output flood work lamp and an ECE/ADR 1/00 approved reverse lamp in a single compact unit 4x3W high-brightness LEDs: 12W total LED power delivering 489lm effective for strong, wide flood beam output ECE/ADR 1/00 approved: Legal for reverse lamp use on Australian and international road vehicles Compact 75mm round format: Small footprint for versatile mounting on trucks, trailers, tray vehicles, and working machinery Stainless steel mounting hardware: Corrosion-resistant stainless steel supplied for all mounting hardware 40cm cable: Pre-wired for standard installation 0.59A @ 13.8V: Efficient current draw for a 12W flood lamp IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits light and heavy commercial applications 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 7512BM Brand LED Autolamps Series 7512 Series Function Work Lamp (Flood) + Reverse Lamp LED Count 4 x 3W (12W total) Beam Type Flood Effective Lumens 489lm Raw Lumens 660lm Dimensions 75mm x 75mm x 30mm Cable Length 40cm Current Draw 0.59A @ 13.8V / 0.27A @ 28V Mount Type Surface mount stainless steel hardware supplied IP Rating IP67 Input Voltage 12–24V DC (multivolt) ECE/ADR Compliance 1/00 Reverse Warranty 5 Years Packaging Single blister Compatible With Suits all 12V and 24V commercial vehicles, trucks, and machinery requiring a combined work and reverse lamp: Trucks and semi-trailers requiring rear work and reverse lighting Tray vehicles and ute tray conversions Agricultural and construction machinery Frequently Asked Questions Is this lamp approved for use as a reverse lamp? Yes the 7512 Series is ECE/ADR 1/00 approved for reverse lamp use.  What is the lumen output? 489lm effective and 660lm raw.  What is the current draw? 0.59A at 13.8V and 0.27A at 28V.  What mounting hardware is supplied? Stainless steel mounting hardware is supplied.  What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

High-Power Round Flood Lamp 3W LEDs, 6000K, Black Powder Coated Aluminium, IP67, 9–32V Product Overview The LED Autolamps FL2 is a heavy-duty round flood lamp powered by high-brightness 3W LEDs in a black powder coated aluminium housing, measuring 115mm x 128mm x 45mm. The 6000K cool daylight output delivers crisp, bright white flood illumination suited to work sites, machinery, agricultural equipment, and commercial vehicle work light applications. Built with an aluminium base for effective heat dissipation and long LED life, IP67 rated across a wide 9–32V operating range. Backed by a 2-year warranty. Features & Benefits High-brightness 3W LEDs — each LED delivers strong individual output for a high-intensity flood beam 6000K cool daylight — crisp, bright white light suited to work environments where maximum visibility is required Black powder coated aluminium housing — corrosion-resistant finish with superior heat dissipation for long-term outdoor and heavy-duty use Heavy-duty construction — engineered for the rigours of agricultural, construction, and commercial vehicle applications IP67 rated — fully sealed against dust and water immersion Wide voltage range 9–32V — compatible with 12V and 24V vehicle and equipment electrical systems 2-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU FL2 Lamp Type Flood Lamp LED Configuration High-power 3W LEDs Colour Temperature 6000K Cool Daylight Housing Material Powder coated aluminium Housing Colour Black Voltage Range 9V – 32V Dimensions 115mm x 128mm x 45mm Beam Type Flood Protection Rating IP67 Warranty 2 years Compatible With / Goes Well With Agricultural equipment, excavators, trucks, and commercial vehicles requiring high-output work lighting 12V and 24V vehicle and equipment electrical systems LED Autolamps work light wiring harnesses and accessories Frequently Asked Questions What is the FL2 suited to? The FL2 is a heavy-duty flood lamp suited to work site, agricultural, and commercial vehicle applications where broad, high-intensity illumination is required — machinery, service vehicles, field equipment, and similar demanding environments. What does a flood beam pattern mean? A flood beam distributes light broadly across a wide angle, illuminating a large area close to the lamp rather than projecting a focused beam over distance. This makes the FL2 ideal for work lighting around vehicles and equipment rather than long-range spotting. What is the advantage of an aluminium housing? Aluminium dissipates heat from the LEDs far more effectively than plastic, protecting LED performance and extending service life — particularly important with high-power 3W LEDs that generate more heat than standard LEDs. What is the IP rating on the FL2? The FL2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for outdoor, agricultural, and heavy transport environments. What warranty does the FL2 carry? The FL2 is backed by a 2-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Recessed Square Work/Reverse Flood Lamp 4x3W LEDs, 489lm, ECE/ADR 1/00, 9–30V, Black E-Coat. Product Overview The LED Autolamps 73120BM is a recessed square work and reverse flood lamp from the 73120 Series a unique recessed mount design that installs flush within a 75mm x 75mm cutout in the vehicle panel or body, with the lamp face sitting at just 5mm above the panel surface. The 73120BM features 4x3W LEDs, 660lm raw / 489lm effective output, ECE R23 approved reverse lamp, 6000K colour temperature, black powder-coated finish, 0.59A at 13.8V / 0.27A at 28V. The 73120BM delivers exceptional bright white light 660 raw lumens, ECE/ADR approved for 1/00 reverse, 12W recessed flood lamp, 75mm x 75mm cutout, 4x3W high-brightness LEDs, IP67, 9–30V. The black electrophoretic (E-coat) finish provides superior corrosion protection for harsh operating environments. Overall face dimensions 100mm x 100mm x 5mm face depth with 75mm x 75mm recessed cutout Key Specifications Function: Work lamp (flood beam) + reverse lamp (ECE/ADR 1/00) LED count: 4 x 3W (12W total) Beam type: Flood Colour temperature: 6000K Lumen output: 489lm effective / 660lm raw Overall dimensions: 100mm x 100mm x 5mm (face depth) Full installed depth: Approx. 31mm Cutout required: 75mm x 75mm Finish: Black electrophoretic (E-coat) Current draw: 0.59A @ 13.8V / 0.27A @ 28V Mount type: Recessed 75mm x 75mm cutout IP rating: IP67 Input voltage: 9–30V DC (multivolt) Compliance: ECE/ADR 1/00 (reverse) Weight: 0.3kg Warranty: 5 years Brand: LED Autolamps SKU: 73120BM Features & Benefits Unique recessed mount design: Unique recess mounted design installs flush within a 75mm x 75mm panel cutout the lamp face sits just 5mm above the panel surface for a minimal-profile installation  Black electrophoretic (E-coat) finish: E-coat black powder finish provides superior corrosion resistance compared to standard painted finishes suited to harsh operating environments 4x3W LEDs 489lm effective: 12W total LED power for strong flood beam work lamp and reverse illumination 6000K cool white: Bright daylight-style output for clear visibility in reversing and work lamp applications ECE/ADR 1/00 approved: Legal for reverse lamp use on Australian road vehicles 9–30V broad voltage range: Wider than the standard 12–24V range covers peak voltage conditions IP67 waterproof: Completely sealed against dust and temporary water immersion 0.27A @ 28V: Efficient current draw at 24V for commercial applications 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 73120BM Brand LED Autolamps Series 73120 Series Function Work Lamp (Flood) + Reverse Lamp LED Count 4 x 3W (12W total) Beam Type Flood Colour Temperature 6000K Effective Lumens 489lm Raw Lumens 660lm Face Dimensions 100mm x 100mm x 5mm Full Installed Depth Approx. 31mm Cutout Required 75mm x 75mm Finish Black electrophoretic (E-coat) Current Draw 0.59A @ 13.8V / 0.27A @ 28V Weight 0.3kg Mount Type Recessed 75mm x 75mm cutout IP Rating IP67 Input Voltage 9–30V DC (multivolt) ECE/ADR Compliance 1/00 Reverse Warranty 5 Years Compatible With  Suits all 9–30V commercial vehicles and trucks requiring a recessed flush-mount work and reverse lamp: Trucks and semi-trailers requiring recessed rear work and reverse lighting Tail-lift and dock leveller applications Commercial vehicle body builders requiring a flush panel installation Frequently Asked Questions What cutout size is required for the 73120BM? The 73120 Series requires a 75mm x 75mm cutout in the mounting surface. What does the "5mm" dimension refer to? The 5mm is the lamp face depth how far the lamp face protrudes above the panel surface after installation. The full installed depth is approximately 31mm ensure adequate space behind the panel before cutting. What is the lumen output? 489lm effective and 660lm raw. What is the E-coating on the 73120BM? Electrophoretic coating (E-coat) is an advanced black finishing process providing superior corrosion resistance particularly suited to commercial vehicles operating in harsh environments. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Compact 12W Flood & Reverse Lamp 489 Lumens, ECE Approved, IP67, Saltwater Resistant, Adjustable Bracket. Product Overview The LED Autolamps 7312BM is a 12-watt compact LED flood and reverse lamp with a black die-cast alloy square housing, delivering 489 effective lumens from high-brightness 3-watt LEDs. Measuring just 73mm x 73mm x 31mm, the 7312BM is a versatile compact work lamp suited to reverse lamp applications (ECE 1/00 approved), flood lighting on machinery and commercial vehicles, and any application requiring a small, powerful, weatherproof LED lamp. The black die-cast alloy housing and stainless steel fittings provide corrosion resistance beyond standard IP67 weatherproofing the 7312BM is specifically noted as tolerant to acidic and alkaline conditions and resistant to sea spray and salt water, making it an ideal choice for marine, coastal, and agricultural applications. An adjustable bracket mount with stainless steel fittings allows precise flood angle adjustment. Pre-wired with a 40cm cable, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single unit in blister packaging. Key Specifications Functions: Flood lamp / reverse lamp (ECE 1/00 approved) Wattage: 12W Effective lumens: 489lm LED type: 3W high-brightness LEDs Housing: Black die-cast alloy Fittings: Stainless steel Dimensions: 73mm x 73mm x 31mm Cable: 40cm Mount type: Adjustable bracket stainless steel fittings IP rating: IP67 Input voltage: 9–30V DC (multivolt) ECE compliance: ECE 1/00 (reverse function) Special resistance: Sea spray, salt water, acidic and alkaline conditions Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 7312BM Features & Benefits ECE 1/00 reverse lamp approved: Certified for legal use as a reverse lamp on Australian road vehicles and trailers dual function as both a flood work lamp and a compliant reverse lamp 489 effective lumens from 3W LEDs: High-brightness 3-watt LEDs deliver impressive output for such a compact 73mm x 73mm form factor Black die-cast alloy housing: Premium alloy construction provides superior heat dissipation, impact resistance, and corrosion resistance compared to plastic housings Saltwater and corrosion resistant: Specifically tested for sea spray, salt water, and acidic/alkaline environment resistance ideal for marine, coastal, and agricultural applications Stainless steel fittings: Bracket hardware and fittings resist rust and corrosion in outdoor and marine environments Adjustable bracket mount: Allows flood angle to be set for the specific application then locked into position 9–30V broad voltage range: Covers virtually all 12V and 24V vehicle and equipment electrical systems IP67 waterproof: Completely sealed against dust and temporary water immersion 40cm cable: Sufficient length for most mounting and wiring scenarios 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 7312BM Brand LED Autolamps Function Flood Lamp / Reverse Lamp (ECE 1/00) Wattage 12W Effective Lumens 489lm LED Type 3W high-brightness Housing Black Die-Cast Alloy Fittings Stainless Steel Dimensions 73mm x 73mm x 31mm Cable Length 40cm Mount Type Adjustable bracket stainless steel IP Rating IP67 Input Voltage 9–30V DC (multivolt) ECE Compliance ECE 1/00 (Reverse) Special Resistance Sea spray, salt water, acidic/alkaline conditions Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits all 9–30V vehicles and equipment requiring compact flood or reverse lighting including: Trucks, trailers, and commercial vehicles (reverse lamp) Marine and boat applications Agricultural machinery Construction and mining equipment 4WD and off-road vehicles requiring compact work lamps Coastal and marine environment vehicles Frequently Asked Questions Can this lamp be used as both a flood lamp and a reverse lamp? Yes the 7312BM is approved under ECE 1/00 for reverse lamp use, and its 489-lumen flood output makes it equally suited to work lamp and flood lighting applications. Choose the application that suits your installation. What makes this lamp suitable for marine and coastal use? Beyond IP67 protection, the 7312BM is specifically designed to tolerate sea spray, salt water, and acidic/alkaline conditions making it more suitable for marine, coastal, and agricultural environments than standard IP67-only lamps. What is the wattage and lumen output? The 7312BM is 12W total, delivering 489 effective lumens from high-brightness 3W LEDs a strong output for such a compact 73mm x 73mm housing. What voltage systems does this lamp suit? The 7312BM operates on 9–30V DC, covering virtually all 12V and 24V vehicle and equipment electrical systems with margin above and below standard nominal voltages. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Front Indicator & Park Light Chrome Bezel, 285mm, ECE/ADR Approved, IP67. Product Overview The LED Autolamps 285CAW12 is a 12V slimline front direction indicator and front position (park) lamp from the 285 Series the 12V variant of the 285CAW range. Measuring 285mm x 25mm x 10mm, the 285 Series delivers dual front lamp function (indicator and park) in one of the most space-efficient front lamp formats available for trailers, caravans, and light commercial vehicles. The screw mount system with clip-on chrome end caps conceals all fasteners for a clean, professional finished appearance. ECE and ADR approved, IP67 rated, and capable of both horizontal and vertical mounting. Backed by LED Autolamps' 5-year warranty and supplied as a single unit in blister packaging. For the 24V version, refer to the 285CAW24. Key Specifications Functions: Front direction indicator + front position (park) lamp Bezel: Chrome with clip-on end caps Dimensions: 285mm x 25mm x 10mm Mount type: Screw mount clip-on chrome caps conceal screws Mount orientation: Horizontal and vertical Voltage: 12V only IP rating: IP67 Compliance: ECE and ADR approved Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 285CAW12 Features & Benefits Front direction indicator and park lamp: Dual function in a single slimline unit amber indicator output and front position lamp in one 285mm body Chrome bezel with clip-on end caps: Screw mount fasteners concealed beneath clip-on chrome end caps for a clean, professional finished appearance Slimline 285mm x 25mm x 10mm: Ultra-compact form factor suited to tight front panel mounting locations on trailers, caravans, and commercial vehicles Horizontal and vertical mounting: Flexible mounting orientation accommodates a wide range of vehicle and trailer configurations ECE and ADR approved: Certified for legal use as a front direction indicator and park lamp on Australian road vehicles IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285CAW12 Brand LED Autolamps Series 285 Series Functions Front Direction Indicator + Front Position Lamp Bezel Chrome clip-on end caps Dimensions 285mm x 25mm x 10mm Mount Type Screw mount clip-on caps Mount Orientation Horizontal and vertical Voltage 12V only IP Rating IP67 Compliance ECE and ADR approved Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits 12V trailers, caravans, and commercial vehicles requiring slimline ECE/ADR front indicator and park lamps including: Box trailers and light trailers Caravans and camper trailers Light commercial vehicles and 4WDs Frequently Asked Questions What functions does this lamp provide? The 285CAW12 provides two functions front direction indicator (amber flashing) and front position/park lamp (steady) in a single slimline 285mm unit. Is this lamp 12V or 24V? This is the 12V only version. For the 24V version refer to the 285CAW24. How are the mounting screws hidden? The 285 Series uses a screw mount system with clip-on chrome end caps. After mounting with screws, the chrome end caps clip over the screw positions, concealing all fasteners for a clean finished appearance. Can this lamp be mounted vertically and horizontally? Yes the 285CAW12 supports both horizontal and vertical mounting orientations. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V system compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

220lm Natural White Small Round LED Lamp Interior/Exterior, IP67, 4500K, 10–30V Product Overview The LED Autolamps 7610WM is a small round low-profile LED lamp delivering 220 effective lumens at 4500K natural white with 66 lux at 1 metre suited to interior and exterior lighting on trucks, caravans, trailers, and commercial vehicles. The round form factor and IP67 rating make it equally at home on a cabin ceiling or an exposed exterior panel. Operating across a wide 10–30V range and backed by a 2-year warranty. Features & Benefits 220 effective lumens — practical light output for small interior spaces and exterior task lighting 4500K natural white — balanced colour temperature suited to both living and working interior environments 66 lux at 1 metre — verified illuminance for real-world brightness assessment IP67 rated — fully sealed against dust and water immersion; suitable for interior and exterior use Low-profile round design — compact form factor mounts neatly on ceilings and panels Wide voltage range 10–30V — compatible with 12V and 24V vehicle and equipment electrical systems 2-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 7610WM Lamp Type Interior / Exterior Colour Temperature 4500K Natural White Effective Lumens 220 lm Illuminance 66 lux @ 1m Voltage Range 10V – 30V Profile Low profile round Protection Rating IP67 Warranty 2 years Compatible With / Goes Well With Truck cabs, caravan interiors, canopy interiors, and commercial vehicle cabins 12V and 24V vehicle and equipment electrical systems LED Autolamps 16606WM small oval lamp (similar output level, oval form factor) LED Autolamps 13118WM round interior lamp (same round concept, larger format) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions How does the 7610WM compare to the 16606WM? The 7610WM is a small round lamp producing 220lm at 66 lux @ 1m, while the 16606WM is a small oval producing 240lm at 74 lux @ 1m. Both have 4500K output and IP67 — choose based on whether a round or oval form factor suits the mounting position better. Can the 7610WM be used in exterior applications? Yes. With an IP67 rating, it is fully sealed against dust and water immersion — suitable for both interior and exposed exterior mounting. What colour temperature does the 7610WM produce? It produces 4500K natural white — a balanced tone suited to working and living spaces in vehicles and caravans. What voltage range does the 7610WM support? It operates across 10V to 30V, compatible with 12V and 24V electrical systems across a broad input range. What warranty does the 7610WM carry? The 7610WM is backed by a 2-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less