Aerpro AEM2R 9.66" Digital E-Mirror with Front and Rear AHD 1080P DVR Cameras A 9.66" IPS touch screen digital e-mirror from Aerpro, the AEM2R replaces the factory rearview mirror with a 1920x480, 1000 nit display delivering a live AHD 1080P rear camera feed from the included Sony STARVIS 2 rear camera, simultaneous AHD 1080P front camera recording, built-in dual-channel DVR at 1080P (rear at 30FPS, front at 25FPS), automatic brightness adjustment, reverse-triggered camera switching with parking guidelines, flip-to-mirror switch, MicroSD support up to 256GB, IP69 rated rear camera, 12-24V compatibility, universal mirror mount, 8-metre camera cable, and a 5-year warranty. Product Overview The Aerpro AEM2R is a complete factory rearview mirror replacement system designed specifically for utes, 4WDs, and vans where a canopy, camper, or tray obstructs the factory mirror view. Unlike clip-over solutions, the AEM2R replaces the factory mirror entirely using a purpose-built mounting bracket for a clean, integrated in-cabin appearance. The 9.66" IPS touch screen at 1920x480 resolution with 1000 nit brightness and automatic brightness adjustment remains clearly visible in direct sunlight and low-light conditions, providing constant rear visibility through the live AHD 1080P camera feed. The included rear camera uses a Sony STARVIS 2 image sensor for sharp, detailed footage in both daytime and low-light conditions, rated IP69 for full protection against high-pressure wash-down. When reverse gear is selected, the display automatically switches to the rear camera view with on-screen parking guidelines. A flip switch allows instant reversion to a conventional mirror view at any time. An integrated clock and date display remains on screen at all times. The AEM2R steps ahead of single-camera e-mirror solutions with an included AHD 1080P front camera that records simultaneously with the rear, providing comprehensive front and rear coverage in a single integrated system. The built-in dual-channel DVR records continuously in 1080P HD (rear at 30FPS, front at 25FPS) with automatic impact-triggered event saving to protect critical footage. MicroSD cards up to 256GB are supported (Class 10 required, sold separately). Installation is simplified with the included 8-metre camera cable and universal mirror mount. Compatible with 12V and 24V vehicles. Note: the included mount is a universal fit. A vehicle-specific mount may be required for correct fitment in some vehicles and is sold separately. Visit aerpro.com or scan the QR code on pack to confirm compatibility before purchase. Backed by a 5-year warranty. Features & Benefits True Mirror Replacement - Clean Integrated Appearance: The AEM2R replaces the factory rearview mirror entirely using a purpose-built mounting bracket, delivering a clean factory-integrated appearance rather than a clip-over solution. 9.66" IPS Touch Screen - 1920x480 Resolution: The wide 9.66" IPS touch screen at 1920x480 resolution delivers a clear, wide image across the full mirror footprint for maximum rear visibility coverage. 1000 Nit Super Bright Display with Automatic Brightness Adjustment: The 1000 nit display remains clearly visible in direct sunlight, and automatic brightness adjustment adapts to ambient light levels for comfortable viewing in all conditions without manual intervention. Sony STARVIS 2 Image Sensor - Exceptional Day and Night Performance: The included rear camera uses a Sony STARVIS 2 image sensor for sharp, detailed AHD 1080P footage in both daytime and challenging low-light conditions. Constant Live Rear Camera Feed - Eliminates Canopy and Camper Blind Spots: The live AHD 1080P rear camera feed replaces the obstructed factory mirror view, restoring clear rear sightlines for utes, 4WDs, and vans fitted with full canopies, campers, and trays. Dual AHD 1080P Camera Inputs - Front and Rear Coverage: Both a front and rear AHD 1080P camera are included, providing comprehensive front and rear coverage from a single integrated system without requiring additional cameras. Built-In Dual Channel DVR - Continuous Loop Recording: The built-in DVR records continuously in 1080P HD across both cameras simultaneously (rear at 30FPS, front at 25FPS), with automatic impact-triggered event saving to protect critical footage during incidents. MicroSD Support Up to 256GB: Supports MicroSD cards up to 256GB (Class 10 required, sold separately) for extended dual-channel recording sessions. Reverse-Triggered Camera Switching with Parking Guidelines: The display automatically switches to the rear camera view with on-screen parking guidelines when reverse gear is selected for precision manoeuvring. Flip to Conventional Mirror View: A flip switch instantly reverts the display from live camera feed to a conventional mirror view when preferred. IP69 Rated Rear Camera: The rear camera is IP69 rated for full protection against dust and high-pressure, high-temperature water jet exposure, suited to exposed exterior mounting positions on working vehicles. Integrated Clock and Date Display: The clock and date remain visible on screen at all times alongside the camera feed. 12-24V Compatible: Suitable for 12V passenger vehicles and 24V commercial vehicles. 8-Metre Camera Cable Included: The 8-metre rear camera cable provides sufficient reach for routing through full-length canopies and tray body installations. 5-Year Industry-Leading Warranty: Backed by Aerpro's 5-year warranty for long-term confidence in working vehicle applications. What's in the Box 1 x Aerpro AEM2R 9.66" Digital E-Mirror 1 x AHD 1080P Rear Camera 1 x AHD 1080P Front Camera 1 x Universal Mirror Mount 1 x 8M Camera Cable Note: MicroSD card sold separately (Class 10, up to 256GB). Vehicle-specific mount may be required and is sold separately. Technical Specs Specification Detail SKU AEM2R Brand Aerpro Display Size 9.66" Display Type IPS Touch Screen Monitor Resolution 1920 x 480 Camera Resolution AHD 1080P (Front and Rear) Image Sensor Sony STARVIS 2 Screen Brightness 1000 Nit Brightness Adjustment Automatic Camera Inputs 2 (Front and Rear) Rear Camera IP Rating IP69 DVR Recording Yes - Dual Channel 1080P Rear Camera Recording 1080P at 30FPS Front Camera Recording 1080P at 25FPS Impact Event Saving Yes (Automatic) MicroSD Support Up to 256GB (Class 10, Sold Separately) Trigger Input Reverse Trigger (Auto Camera Display and Parking Guidelines) Mirror Mode Flip Switch to Conventional Mirror View On-Screen Display Clock and Date Power Supply 12-24V DC Camera Cable Length 8 Metres Dimensions Confirm with supplier Warranty 5 Years Barcode 9317114953025 Compatible With The AEM2R is compatible with 12V and 24V vehicles. The included universal mirror mount suits many vehicles. A vehicle-specific mount may be required for correct fitment and is sold separately. Visit aerpro.com or scan the QR code on pack to confirm compatibility and available vehicle-specific mounts before purchase. A Class 10 MicroSD card up to 256GB is required for DVR recording and is sold separately. Frequently Asked Questions Does the AEM2R record both front and rear cameras simultaneously? Yes. The built-in dual-channel DVR records both the included front and rear AHD 1080P cameras simultaneously - rear at 30FPS and front at 25FPS - in continuous loop recording mode, with automatic impact-triggered event saving. What MicroSD card is required for DVR recording? A Class 10 MicroSD card up to 256GB is required for DVR recording. The MicroSD card is sold separately and is not included in the box. Does the AEM2R switch automatically to the rear camera when reversing? Yes. When reverse gear is selected, the display automatically switches to the rear camera view and on-screen parking guidelines appear to assist with precision manoeuvring. What is the difference between the AEM2R and a clip-over e-mirror? The AEM2R replaces the factory rearview mirror entirely using a purpose-built mounting bracket, providing a clean factory-integrated appearance. Clip-over solutions attach to the existing mirror and can be bulkier or less secure. The included universal mount suits many vehicles; a vehicle-specific mount may be required for some vehicles and is sold separately. Is the AEM2R compatible with 24V commercial vehicles? Yes. The AEM2R operates from 12-24V DC, making it compatible with both 12V passenger vehicles and 24V commercial vehicles including light trucks and vans. Is a vehicle-specific mount required? The included mount is a universal fit that suits many vehicles. A vehicle-specific mount may be required for correct fitment in some vehicles and is available separately. Visit aerpro.com to confirm compatibility and check available vehicle-specific mounts before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

DNA RV74B-AHD-DVR 7 Inch LCD 4 Channel Quad Rearview Screen Professional multi-camera monitoring solution for commercial vehicles and caravans. This high-resolution 4-channel quad picture TFT-LCD monitor is ideal for multiple camera applications delivering versatile viewing options with 11 different image modes, from full screen viewing to multiple split screen configurations. Featuring 7-inch TFT-LCD display with 16:9 aspect ratio and 800 (RGB) x 480 pixel resolution supporting both PAL and NTSC video systems automatically, 4 camera inputs with 4 triggered inputs for each camera position (front, rear, left, right), and dash-mountable design with U-shape bracket and large removable sun visor. Built for demanding commercial applications including caravans, buses, and truck installations where large viewing screen or multiple camera viewing is required, this monitor features illuminated touch front panel buttons for intuitive operation, inbuilt speaker for audio monitoring, IR remote control for convenient operation, and 4-pin water-resistant lockable camera connections ensuring reliable all-weather performance. Image customization options include UP/Down and Left/Right mirror adjustments for flexible camera orientation, operates across wide voltage range (12V to 24V DC ±10%) suitable for various vehicle electrical systems, low 5W current consumption for energy efficiency, and rugged construction rated for extreme operating temperatures (-20°C to +70°C). Compact dimensions (180mm W x 121mm H x 23mm D) provide professional installation flexibility for fleet vehicles, recreational vehicles, and heavy commercial transport applications demanding comprehensive visual awareness and safety monitoring capabilities. Product Overview This high resolution 4 Channel quad picture TFT-LCD monitor is ideal for multiple camera applications with 11 different image views, from full screen viewing and multiple split screen viewing. Includes front panel touch buttons with a large removable sun visor and is ideal for Caravans, Buses and Truck installations where a large viewing screen or multiple camera viewing is required. Important Notes: 4 Separate Cameras Required: This monitor requires up to 4 separate cameras (not included) for full functionality. Each camera input has dedicated trigger wire allowing automatic camera activation based on vehicle operation (reverse gear, turn signals, brake lights). Monitor functions with 1-4 cameras connected, but all viewing modes require appropriate number of cameras installed. Professional Installation Recommended: Proper installation requires mounting monitor securely, routing 4 camera cables through vehicle, connecting trigger wires to appropriate vehicle circuits (reverse lights, indicators, brake lights), and testing all camera angles and switching functions. Incorrect wiring may cause camera malfunction, incorrect triggering, or electrical issues. Professional installation ensures optimal camera positioning, secure weatherproof connections, and proper integration with vehicle electrical systems. Wide Voltage Range Compatibility: Operates on 12V to 24V DC (±10%) suitable for passenger vehicles (12V), commercial trucks (24V), buses, and caravans. Verify voltage compatibility with your vehicle electrical system before installation. Do not exceed voltage range as this may damage monitor electronics. Camera Compatibility Requirements: Designed for standard analog cameras with composite video output compatible with PAL or NTSC video systems. Digital cameras, IP cameras, or cameras with non-standard outputs are not compatible. Ensure camera outputs match monitor inputs before purchase. Environmental Operating Limits: Rated for -20°C to +70°C operating temperature suitable for Australian climate conditions. However, extreme direct sunlight exposure or enclosed cabin temperatures exceeding 70°C may cause temporary shutdown or display degradation. Use provided sun visor and ensure adequate ventilation around monitor for reliable operation. Key Features 7 Inch TFT-LCD Display - High-resolution display with 16:9 aspect ratio and 800 (RGB) x 480 pixel resolution providing clear detailed images for safety monitoring. 4 Camera Inputs with Triggered Activation - Four independent camera inputs with dedicated trigger wires for each position (front, rear, left, right) allowing automatic camera switching based on vehicle operation. 11 Different Image Modes - Versatile viewing options including full screen single camera, dual split screen, triple split screen, quad split screen, and various layout combinations for comprehensive vehicle monitoring. AUTO PAL & NTSC Video System - Automatically detects and switches between PAL and NTSC video standards ensuring compatibility with wide range of camera types. Dash Mountable with U-Shape Bracket - Professional mounting bracket included for secure dashboard or windscreen installation in various vehicle types. Large Removable Sun Visor - Included sun visor reduces glare and improves screen visibility in bright sunlight conditions, removable when not required. Illuminated Touch Front Panel Buttons - Intuitive front panel touch buttons with illumination for easy operation in low-light conditions without requiring remote control. Inbuilt Speaker - Integrated speaker provides audio monitoring capability when paired with cameras featuring audio output. IR Remote Control - Wireless infrared remote control included for convenient operation from driver position without reaching for monitor. 4-Pin Water-Resistant Lockable Camera Connections - Professional-grade weatherproof connectors with locking mechanism ensuring reliable connections in harsh environmental conditions. Image Flip Options - UP/Down and Left/Right mirror image adjustments allowing flexible camera mounting orientations and correcting inverted images. Wide Voltage Range Operation - Operates on 12V to 24V DC (±10%) compatible with passenger vehicles, commercial trucks, buses, and caravans. Low Power Consumption - Only 5W current consumption minimizing electrical system load and suitable for extended operation. Extreme Temperature Rating - Operating temperature range -20°C to +70°C suitable for Australian climate conditions and commercial vehicle environments. Compact Dimensions - 180mm W x 121mm H x 23mm D compact size allows flexible installation locations while maintaining large viewing area. Commercial Vehicle Applications - Ideal for caravans, buses, trucks, fleet vehicles, heavy equipment, and recreational vehicles requiring comprehensive visual awareness. Professional Packaging - Supplied in display box packaging suitable for retail presentation and safe transport. Technical Specifications Specification Details Brand DNA Product Type 4 Channel Quad Rearview Monitor SKU RV74 Display Type TFT-LCD Screen Size 7 Inch (Diagonal) Aspect Ratio 16:9 Resolution 800 (RGB) x 480 Pixels Video System AUTO (PAL & NTSC) Camera Inputs 4 Independent Channels Trigger Inputs 4 (Front, Rear, Left, Right) Image Modes 11 Different Viewing Configurations Front Panel Controls Illuminated Touch Buttons Audio Inbuilt Speaker Remote Control IR (Infrared) Remote Included Camera Connectors 4-Pin Water-Resistant Lockable Image Adjustments UP/Down Flip, Left/Right Mirror Mounting Dash Mountable with U-Shape Bracket Sun Visor Large Removable Sun Visor Included Operating Voltage 12V to 24V DC (±10%) Current Consumption 5W Operating Temperature -20°C to +70°C Dimensions (W x H x D) 180mm x 121mm x 23mm Width 180mm (7.09 in) Height 121mm (4.76 in) Depth 23mm (0.91 in) Packaging Display Box Applications Caravans, Buses, Trucks, Fleet Vehicles, Commercial Transport Warranty Standard Manufacturer Warranty Frequently Asked Questions Q: How many cameras do I need and what cameras are compatible? A: This monitor supports 1 to 4 cameras (cameras sold separately). You can start with one camera and add more as needed. Compatible with standard analog cameras featuring composite video output (RCA or aviation-style connectors) supporting PAL or NTSC video systems. Reverse cameras, side cameras, front cameras, and blind-spot cameras all work if they output standard analog video. Digital cameras, IP cameras, or HD-SDI cameras are not compatible. Ensure cameras have 4-pin aviation-style connectors or compatible wiring for connection to monitor's water-resistant lockable ports. Q: How does the automatic camera switching work? A: Each of the 4 camera inputs has a dedicated trigger wire. Connect trigger wires to appropriate vehicle circuits: rear camera trigger to reverse light power, left/right camera triggers to turn signal circuits, front camera trigger to brake or ignition. When trigger receives power (e.g., reverse gear engaged), monitor automatically switches to corresponding camera view. You can also manually select cameras using front panel buttons or IR remote. Trigger sensitivity and switching behavior may require professional adjustment during installation. Q: Will this work in my 12V car and 24V truck? A: Yes, the monitor operates on 12V to 24V DC (±10% tolerance) making it compatible with passenger vehicles (12V), light commercial vehicles (12V), heavy trucks (24V), buses (24V), and caravans (12V or 24V). The wide voltage range eliminates need for separate models for different vehicle types. Ensure proper fusing (recommended 1-2A fuse) on power supply line for protection. Q: What are the 11 different image modes? A: The 11 viewing modes include: (1) Single full-screen camera 1, (2) Single full-screen camera 2, (3) Single full-screen camera 3, (4) Single full-screen camera 4, (5) Dual horizontal split (2 cameras side-by-side), (6) Dual vertical split (2 cameras top/bottom), (7) Triple screen with one large + two small, (8) Triple screen alternate layout, (9) Quad split (4 cameras equal size), (10) Quad split with one emphasized camera, (11) Quad split alternate layout. Specific layouts may vary - consult user manual for detailed view configurations. Use front panel buttons or IR remote to cycle through modes. Q: Where should I mount this monitor and how difficult is installation? A: Common mounting locations include dashboard (using U-bracket), windscreen (with suction mount - not included), or custom console mounting. Choose location providing clear driver visibility without obstructing critical vehicle controls or sightlines. Professional installation is strongly recommended as it requires: (1) Routing 4 separate camera cables through vehicle, (2) Mounting cameras with proper aiming angles, (3) Connecting trigger wires to vehicle electrical circuits (reverse lights, indicators), (4) Securing all connections with weatherproof methods, (5) Testing all camera views and automatic switching functions. DIY installation possible for experienced automotive electrical enthusiasts, but professional installation ensures optimal camera positioning, reliable weatherproof connections, and compliance with local regulations regarding in-vehicle displays. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

E-Mirror Mounting Bracket for Volkswagen Transporter, Crafter, Caddy, Golf, Passat & Tiguan Direct Factory Fit, No Cutting, Suits AEM1R & AEM2R. Product Overview The Aerpro AEMB3 is a dedicated e-mirror mounting bracket covering six Volkswagen model ranges Transporter, Crafter, Caddy, Golf, Passat, and Tiguan spanning both commercial and passenger variants. It allows the AEM1R or AEM2R digital e-mirror to be installed in place of the factory mirror without cutting, drilling, or fabrication. A purpose-built, vehicle-specific solution for a clean factory-fit installation. Compatible with both the AEM1R (9.6" digital e-mirror with rear DVR camera) and the AEM2R (9.6" digital e-mirror with front and rear DVR cameras). Always confirm exact model year and variant compatibility before ordering. Kit Inclusions AEMB3 E-Mirror Mounting Bracket Key Specifications Type: Dedicated VW e-mirror mounting bracket Compatible e-mirrors: AEM1R, AEM2R Installation: Direct factory-fit no cutting or fabrication Brand: Aerpro SKU: AEMB3 Features & Benefits Six VW model ranges covered: Transporter, Crafter, Caddy, Golf, Passat, and Tiguan in a single bracket Direct factory-fit: Replaces factory mirror mount directly no cutting, drilling, or fabrication Suits AEM1R and AEM2R: Compatible with both Aerpro 9.6" digital e-mirror models: AEM1R 9.6" Digital E-Mirror with Rear DVR Camera AEM2R 9.6" Digital E-Mirror with Front and Rear DVR Cameras Technical Specs Specification Detail SKU AEMB3 Brand Aerpro Type E-Mirror Mounting Bracket Suits Volkswagen 6 model ranges Compatible With AEM1R, AEM2R Installation Direct factory-fit no cutting Compatible Vehicles Model Years Notes Caddy 2015–2021 2KN Crafter 2017–2026 SY1 Series Golf 1998–2007, 2010–2013 Passat 1999–2010 B5 Tiguan 2009–2010 Transporter 2004–2015 T5 Transporter 2015–2020 T6  Important: Confirm exact model year and variant compatibility before ordering. Frequently Asked Questions Does this bracket require cutting or drilling? No the AEMB3 is a direct factory-fit design that replaces the factory mirror mount without cutting, drilling, or fabrication. Which e-mirrors does this bracket suit? The AEMB3 suits both the AEM1R (9.6" digital e-mirror with rear DVR camera) and the AEM2R (9.6" digital e-mirror with front and rear DVR cameras). Is the e-mirror included? No the AEMB3 is the mounting bracket only. The AEM1R or AEM2R e-mirror is sold separately. How does the AEMB3 differ from the AEMB49? The AEMB49 is dedicated specifically to the VW Crafter SY1 and SZ series. The AEMB3 covers a broader range of six VW models including the Transporter, Caddy, Golf, Passat, Tiguan, and Crafter SY1 (2017–2026). Confirm your exact model before selecting. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

One Bracket, Three Badges Direct Factory Fit for the Ducato, Boxer and Jumper Platform Product Overview The Aerpro AEMB3B is an E-Mirror mounting bracket engineered for the shared van platform sold as the Fiat Ducato, Peugeot Boxer, and Citroen Jumper. Because all three vans share the same mirror mounting architecture, a single bracket covers all three badges making it the correct fitment for Ducato (2014–2021), Boxer (2014–2019), and Jumper (2014–2019) variants. Designed as a direct factory mirror replacement, the AEMB3B requires no cutting or fabrication. It is compatible with both the AEM1R (9.6" Digital E-Mirror with Rear DVR Camera) and the AEM2R (9.6" Digital E-Mirror with Front and Rear DVR Cameras), allowing either E-Mirror to be installed cleanly in place of the OEM mirror assembly. Features & Benefits Suits three van badges on one shared platform — Fiat Ducato, Peugeot Boxer, and Citroen Jumper Direct factory-fit design — replaces the OEM mirror assembly without cutting or fabrication Compatible with AEM1R and AEM2R — suits both the single rear camera and dual front/rear camera E-Mirror models Covers Ducato 2014–2021, Boxer 2014–2019, Jumper 2014–2019 — broad model year coverage across all three brands Technical Specs Specification Detail Part Number AEMB3B Brand Aerpro Product Type E-Mirror Mounting Bracket Compatible E-Mirrors AEM1R, AEM2R Fiat Ducato 2014–2021 Peugeot Boxer 2014–2019 Citroen Jumper 2014–2019 Installation Direct factory mirror replacement — no cutting required Compatible With Fiat Ducato 2014–2021 Peugeot Boxer 2014–2019 Citroen Jumper 2014–2019 Compatible E-Mirror models: AEM1R — 9.6" Digital E-Mirror with Rear DVR Camera AEM2R — 9.6" Digital E-Mirror with Front and Rear DVR Cameras Weight Confirm with supplier. Frequently Asked Questions Why does one bracket suit three different van brands? The Fiat Ducato, Peugeot Boxer, and Citroen Jumper are all built on the same shared van platform and use the same mirror mounting architecture. A single bracket fits all three badges without modification. Does this bracket work with both the AEM1R and AEM2R? Yes. The AEMB3B is compatible with both the AEM1R (single rear DVR camera) and the AEM2R (dual front and rear DVR cameras). Select the E-Mirror model that suits your camera requirements. Does this require any cutting or drilling to install? No. The AEMB3B is a direct factory mirror replacement designed to bolt on in place of the OEM mirror assembly without cutting, drilling, or fabrication. What years does this bracket cover? The bracket suits Fiat Ducato 2014–2021, Peugeot Boxer 2014–2019, and Citroen Jumper 2014–2019. Confirm your specific vehicle year before purchasing. Is the E-Mirror included with this bracket? No. This is the mounting bracket only. The AEM1R and AEM2R E-Mirrors are sold separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

One Bracket for Four Commercial Van Brands Sprinter, Crafter, Master, Trafic and D-Max Product Overview The Aerpro AEMB12 is an E-Mirror mounting bracket covering a range of popular commercial and trade vans from Isuzu, Mercedes-Benz, Renault, and Volkswagen. A single bracket provides a direct factory mirror replacement fitment across all seven supported model variants no cutting or fabrication required making it the correct choice for the Isuzu D-Max, Mercedes-Benz Sprinter W906 and Vito W639, Renault Master (X62 Series) and Trafic, and Volkswagen Crafter (2E and 2ED1 Series). Compatible with both the AEM1R (9.6" Digital E-Mirror with Rear DVR Camera) and the AEM2R (9.6" Digital E-Mirror with Front and Rear DVR Cameras). Features & Benefits Covers four commercial van brands in one bracket — Isuzu, Mercedes-Benz, Renault, and Volkswagen Suits seven popular fleet and trade vehicle variants — D-Max, Sprinter, Vito, Master, Trafic, and Crafter Direct factory-fit design — replaces the OEM mirror assembly without cutting or fabrication Compatible with AEM1R and AEM2R — suits both the single rear camera and dual front/rear camera E-Mirror models Technical Specs Specification Detail Part Number AEMB12 Brand Aerpro Product Type E-Mirror Mounting Bracket Compatible E-Mirrors AEM1R, AEM2R Isuzu D-Max 2003–2007 Mercedes-Benz Sprinter W906 2010–2018 Mercedes-Benz Vito W639 2003–2015 Renault Master 2011–2019 (X62 Series) Renault Trafic Confirm year range with supplier VW Crafter 2006–2011 (2E), 2011–2017 (2ED1 Series) Installation Direct factory mirror replacement — no cutting required Compatible With Isuzu D-Max 2003–2007 Mercedes-Benz Sprinter W906 2010–2018 Mercedes-Benz Vito W639 2003–2015 Renault Master 2011–2019 (X62 Series) Renault Trafic (confirm year range with supplier) Volkswagen Crafter 2006–2011 (2E Series) Volkswagen Crafter 2011–2017 (2ED1 Series) Compatible E-Mirror models: AEM1R — 9.6" Digital E-Mirror with Rear DVR Camera AEM2R — 9.6" Digital E-Mirror with Front and Rear DVR Cameras Weight Confirm with supplier. Frequently Asked Questions Which vehicles does the AEMB12 fit? The AEMB12 fits the Isuzu D-Max (2003–2007), Mercedes-Benz Sprinter W906 (2010–2018), Mercedes-Benz Vito W639 (2003–2015), Renault Master X62 Series (2011–2019), Renault Trafic (confirm year range), and Volkswagen Crafter 2E (2006–2011) and 2ED1 Series (2011–2017). Confirm your specific model and year before purchasing. Does this bracket work with both the AEM1R and AEM2R? Yes. The AEMB12 is compatible with both the AEM1R (single rear DVR camera) and the AEM2R (dual front and rear DVR cameras). Select the E-Mirror model that suits your camera requirements. Does this require any cutting or drilling to install? No. The AEMB12 is a direct factory mirror replacement designed to bolt on in place of the OEM mirror assembly without cutting, drilling, or fabrication. What is the year range for the Renault Trafic? The year range for the Renault Trafic is not specified in the supplier data. Confirm with Aerpro or the supplier before purchasing if your vehicle is a Trafic. Is the E-Mirror included with this bracket? No. This is the mounting bracket only. The AEM1R and AEM2R E-Mirrors are sold separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AEM2RB3 9.66 Inch Digital E-Mirror with Front and Rear AHD 1080P DVR Cameras and AEMB3 Volkswagen Specific Mounting Bracket The AEM2RB3 from Aerpro is a complete digital e-mirror kit pairing the AEM2R 9.66 inch IPS touchscreen e-mirror with the AEMB3 vehicle-specific mounting bracket, matched for confirmed Volkswagen Caddy, Crafter, Golf, Passat, Tiguan, and Transporter models. Included front and rear AHD 1080P cameras provide dual-channel 1080P DVR recording with a Sony STARVIS 2 rear sensor, live rear vision feed, automatic reversing guidelines, and 5-year warranty coverage. A MicroSD card up to 256GB is supported for onboard recording storage and is sold separately. Product overview Vehicles fitted with canopies, campers, or trays lose the factory rearview mirror's effectiveness as rear vision is fully obstructed. The AEM2RB3 addresses this by replacing the factory rearview mirror entirely with a 9.66 inch IPS touchscreen displaying a live AHD 1080P rear camera feed, restoring clear and unobstructed rear sightlines regardless of what is mounted in the tray or tub. The 1000 nit display with automatic brightness adjustment remains clearly legible in direct sunlight and low-light conditions, and a flip switch allows instant reversion to a conventional mirror view when needed. The AEMB3 bracket is included in the box and installs in place of the factory mirror without cutting or fabrication, providing a clean factory-quality result specific to confirmed Volkswagen models. The front and rear AHD 1080P cameras record simultaneously in dual-channel 1080P HD continuously, with automatic impact-triggered event saving protecting critical footage. The system is compatible with 12V and 24V vehicles, making it suited to both passenger and commercial applications across the confirmed Volkswagen model range. Features and benefits Complete kit with vehicle-specific bracket included: The AEM2R digital e-mirror and AEMB3 vehicle-specific mounting bracket are supplied together in a single box, eliminating the need to source and match a separate bracket. 9.66 inch IPS touchscreen at 1920x480 resolution: The wide IPS display delivers a sharp, clear live camera feed across the full mirror footprint with touch control for system operation. 1000 nit display with automatic brightness adjustment: The super-bright 1000 nit display remains clearly visible in direct sunlight and automatically adjusts to ambient light levels for comfortable viewing at all times. Sony STARVIS 2 rear camera sensor: The premium Sony STARVIS 2 image sensor in the rear camera delivers sharp, detailed footage in both daytime and low-light conditions for reliable rear vision coverage. Dual AHD 1080P front and rear cameras with DVR recording: Both the front and rear cameras record simultaneously in dual-channel 1080P HD, with the rear at 30FPS and the front at 25FPS, providing comprehensive front and rear coverage in a single integrated system. Automatic impact-triggered event saving: The built-in DVR automatically saves critical footage when an impact is detected, protecting evidence of incidents from being overwritten by continuous loop recording. Automatic reverse camera activation with guidelines: Selecting reverse gear automatically switches the screen to the rear camera view with on-screen parking guidelines for precision manoeuvring assistance. IP69 rated rear camera: The weatherproof IP69-rated rear camera withstands high-pressure wash-down and harsh outdoor conditions suited to canopy, camper, and tray-equipped commercial applications. MicroSD support up to 256GB: The system supports MicroSD cards up to 256GB (Class 10 required, sold separately) for extended dual-channel DVR recording storage. 12V and 24V compatible: Suitable for both passenger vehicles and commercial applications across the confirmed Volkswagen model range. 5-year warranty: Backed by a 5-year warranty for long-lasting performance and peace of mind. What's in the box 1x AEM2R 9.66 inch Digital E-Mirror 1x AHD 1080P Rear Camera 1x AHD 1080P Front Camera 1x AEMB3 Vehicle-Specific Mounting Bracket 1x 8 metre Camera Cable Technical specs Specification Detail SKU AEM2RB3 Brand Aerpro Display Size 9.66 inch IPS touchscreen Display Resolution 1920 x 480 Screen Brightness 1000 nit Brightness Adjustment Automatic Camera Resolution AHD 1080P (front and rear) Rear Camera Image Sensor Sony STARVIS 2 Rear Camera IP Rating IP69 DVR Recording Dual channel 1080P, rear at 30FPS, front at 25FPS MicroSD Support Up to 256GB, Class 10 required (sold separately) Camera Inputs 2 (front and rear) Reverse Trigger Yes, automatic camera display with guidelines Mirror Mode Flip switch to conventional mirror view On-Screen Display Clock and date Power Supply 12V to 24V DC Camera Cable Length 8 metres Warranty 5 years Compatible with The AEMB3 mounting bracket included in this kit is confirmed for the following Volkswagen vehicles. Confirm your specific model, variant, and build year before ordering. Make Model Variant Years Volkswagen Caddy 2KN 2015 - 2021 Volkswagen Crafter SY1 Series 2017 - 2026 Volkswagen Golf All variants 1998 - 2007 Volkswagen Golf All variants 2010 - 2013 Volkswagen Passat B5 1999 - 2010 Volkswagen Tiguan All variants 2009 - 2010 Volkswagen Transporter T5 2004 - 2015 Volkswagen Transporter T6 2015 - 2020 Frequently asked questions Why would I need a digital e-mirror?Vehicles fitted with canopies, campers, trays, or other rear-mounted equipment lose effective rearview mirror vision as the factory mirror can no longer see through the obstruction. The AEM2RB3 replaces the factory mirror with a live 1080P camera feed, restoring clear and unobstructed rear sightlines regardless of what is mounted behind the cab. Does the AEM2RB3 include both front and rear cameras?Yes. Both an AHD 1080P front camera and an AHD 1080P rear camera are included in the kit, providing comprehensive front and rear coverage with simultaneous dual-channel DVR recording in a single integrated system. Is a MicroSD card included?No. A MicroSD card is required for DVR recording storage and must be purchased separately. The system supports MicroSD cards up to 256GB with a Class 10 rating required for reliable recording performance. Does the AEMB3 bracket suit vehicles outside the confirmed Volkswagen compatibility list?The AEMB3 bracket is designed and confirmed for the Volkswagen models listed in the compatibility table. For other vehicle makes and models, a different bracket may be required. Contact us to confirm bracket availability for your specific vehicle. What is the warranty on the AEM2RB3?The AEM2RB3 is backed by a 5-year warranty covering long-term performance and reliability. Contact us for further details on warranty claims and conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Late 2023-Up Toyota Landcruiser 70 Series – Add a Reverse Camera to Factory Head Unit Legendary Products & Support From Authorized Dealers When you choose InstallPRO, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized InstallPRO dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by InstallPRO's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized InstallPRO dealer today!

Read more less

Super Versatile Camera Can Be Installed & Can Be Used In Front, Rear, Side or Inside Your Vehicle!It's The Swiss Army Knife Of CamerasThis super versatile camera can be installed and can be used in front, rear, side, or inside your vehicle. With its flush mount design this seamlessly into trim panels and vehicle panels without standing out.Great For Wheel ProtectionHave you ever wanted to check your wheel clearance from gutters without getting out of the car? With its adjustable angle camera, you can get up to 170 degrees of visibility for clear visibility. (Requires vehicle infotainment system with Video input)Keep An Eye On Your Back SeatBy flushing into your roof lining, this camera can be easily installed to keep an eye on the kids in the back with ease. No more taking your eyes off the road when the kids cause a ruckus. (Requires vehicle infotainment system with Video input)Packed With FeaturesFunctional even at low light levels, this camera sports a wide field of view, durable waterproof construction, and selectable parking lines for extra guidance and security.Specifications: Sensor Type: 1/4" CMOS Colour: Black Finish Construction: Metal Housing Min. Illumination: 0.3LUX Include Mounting Brackets: No – Flush Mount Viewing Angle: 170° LED Count: No – Non-IR LED Type Video System: NTSC Debris-Proof Rating: IP67 Parking Lines: Yes – Static & Selectable ON/OFF Image (Mirrored/Non-Mirrored): Selectable Application: Front, Side, or Rearward Camera Legendary Products & Support From Authorized Dealers When you choose ECHOMASTER, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ECHOMASTER dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ECHOMASTER's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ECHOMASTER dealer today!

Read more less

Stinger TCTOY4KIT Wireless Trailer Camera Kit for Select Toyota Vehicles with Factory Camera Retention The Stinger TCTOY4KIT is a wireless trailer camera kit designed for select Toyota vehicles, making it straightforward to reverse when towing a caravan, horse float, or trailer of any size. The Echomaster PCAM-WLP wireless camera transmits video up to 45 metres at 2.4GHz with digital encryption, eliminating the need to run video cabling through the trailer. The kit includes the PCAM-WLP wireless camera, PAC PACAVS-21 AV switching unit, and the SCTYRT4 vehicle-specific Toyota 4-pin harness. Factory OEM reverse camera retention is supported where fitted. Product overview The TCTOY4KIT uses the Echomaster PCAM-WLP wireless camera to transmit live trailer video directly to a receiver installed behind the dashboard, with no video cable required through the caravan, float, or trailer. The camera connects to the trailer's reverse lights for power. When the trailer is connected and reverse is engaged, the trailer camera overrides the factory OEM reverse camera. When the trailer is disconnected, the factory camera resumes normal operation automatically. The PCAM-WLP uses a PWM power supply, making it safe for use on modern Toyota vehicles with CAN-controlled tail light circuits that are sensitive to conventional accessory load connections. The PAC PACAVS-21 AV switching unit manages input switching between the factory camera and trailer camera automatically. The included SCTYRT4 vehicle harness connects to the Toyota factory 4-pin camera connector. Note that the kit connects factory connector to bare wires and requires some wiring, so it is not fully plug-and-play. If no factory camera is fitted, an aftermarket reverse camera can be integrated using this kit. Parking guidelines are not provided on the trailer camera image. Features and benefits 45-metre wireless range: The PCAM-WLP transmits video wirelessly up to 45 metres without obstacles, eliminating the need to run cabling through caravans, horse floats, or trailers, particularly valuable for long rigs where cable runs are impractical. 2.4GHz digital encrypted wireless: Digital encryption on the 2.4GHz wireless link provides a stable and secure video signal without interference from other wireless devices in the area. IP67 waterproof camera: Full IP67 rating makes the wireless camera suited to trailer mounting in all weather conditions including rain, dust, mud, and debris. PWM power supply, CAN-bus safe: The PCAM-WLP uses a PWM power supply specifically designed for vehicles with CAN-controlled tail light circuits, preventing issues that conventional accessory connections can cause on modern Toyota vehicles. Factory camera retention: Where the Toyota is fitted with a factory OEM reverse camera, it is retained by the kit. The trailer camera automatically takes priority when the trailer is connected and reverse is engaged, and the factory camera resumes when the trailer is removed. 140-degree wide viewing angle: A broad 140-degree field of view covers the full width of a trailer or caravan, reducing blind spots when reversing. Vehicle-specific 4-pin Toyota harness: The SCTYRT4 vehicle harness provides a matched connection to the Toyota factory 4-pin camera connector without additional adaptors. PAC PACAVS-21 AV switching unit: The included PAC AV switching unit manages input switching between the factory camera and trailer camera, enabling automatic override when the trailer is connected and reverse is engaged. What's in the box 1 x Echomaster PCAM-WLP wireless camera 1 x PAC PACAVS-21 AV switching unit 1 x SCTYRT4 Toyota 4-pin vehicle harness Mounting brackets Technical specs Specification Detail SKU TCTOY4KIT Brand Stinger Wireless Camera Echomaster PCAM-WLP Wireless Frequency 2.4GHz, digital encrypted Wireless Range Up to 45 metres (without obstacles) Viewing Angle 140 degrees IP Rating IP67 Minimum Illumination 0.1 LUX Power Supply PWM, CAN-bus safe Operating Temperature -20 to +65 degrees C Vehicle Connector 4-pin Toyota style Parking Lines No Factory Camera Retention Yes, overridden when trailer connected, resumes when removed Aftermarket Camera Support Yes, if no factory camera fitted AV Switching Unit PAC PACAVS-21 Vehicle Harness SCTYRT4 Mounting Brackets Included Installation Type Factory connector to bare wires, some wiring required Compatible with The Stinger TCTOY4KIT is confirmed for the following Toyota models fitted with a factory 4-pin camera connector: Make Model Variant Years Toyota 86 Pre-facelift 2012-2017 Toyota 86 Post-facelift 2017-2020 Toyota Estima XR30/XR40 2000-2005 Toyota HiLux AN10/AN20/AN30 2011-2013 Toyota LandCruiser Prado 120 Series 2002-2009 Toyota LandCruiser Prado 150 Series (without factory navigation only) 2009-2013 The LandCruiser Prado 150 Series compatibility is limited to models without factory navigation. Navigation-equipped 150 Series Prado models are not supported. Always confirm your vehicle's factory camera connector type is 4-pin before purchasing. Frequently asked questions Does the trailer camera replace my factory reverse camera permanently?No. When the trailer is connected and reverse is engaged, the trailer camera overrides the factory camera. When the trailer is disconnected, the factory OEM reverse camera resumes normal operation automatically. Do I need to run a cable through my caravan or trailer?No. The PCAM-WLP transmits wirelessly up to 45 metres. The camera is powered by the trailer's reverse lights and transmits to a receiver installed behind the dashboard, so no video cable needs to be routed through the trailer. Is the wireless camera safe for vehicles with CAN-controlled tail lights?Yes. The PCAM-WLP uses a PWM power supply specifically designed to be safe for use on vehicles with CAN-controlled tail light circuits, which are sensitive to conventional direct accessory connections common on modern Toyotas. Does the LandCruiser Prado 150 Series require factory navigation to be absent?Yes. The TCTOY4KIT is compatible with the LandCruiser Prado 150 Series (2009-2013) only in models without factory navigation. Navigation-equipped 150 Series Prado models are not supported by this kit. Will this kit show parking guidelines on the trailer camera image?No. Parking lines are not provided on the trailer camera feed. The PCAM-WLP displays a raw camera view without overlay guidelines. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer Support If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today! 

Read more less