6"×9" 3-Way Power Series Coaxial 100W RMS, Three Drivers, Carbon Fibre Composite Cone, Aluminium Dome Tweeter, ICC Crossover, Grilles Included. Product Overview The Rockford Fosgate Power T1693 is a 6"×9" 3-way coaxial speaker rated at 100W RMS adding a dedicated midrange driver to the woofer and tweeter of the 2-way format, delivering independent handling of bass, midrange, and high frequencies from a single coaxial oval assembly. The kit confirms grilles, integrated concealed crossovers, and mounting hardware are included. The T1693 uses the Power series construction platform: carbon fibre and polypropylene injection-moulded composite cone, aluminium dome tweeter with polyurethane suspension, butyl rubber surround, and ICC (Integrated Concealed Crossover). Full technical specifications impedance, sensitivity, frequency response, mounting depth, and crossover details are not provided in the supplier data and must be pulled from the official Rockford Fosgate T1693 datasheet before publishing. Key Specifications Speaker size: 6"×9" (oval) Configuration: 3-way coaxial (woofer + midrange + aluminium dome tweeter) Power handling (RMS): 100W per speaker (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Tweeter: Aluminium dome, polyurethane suspension (size not specified — confirm with Rockford Fosgate) Crossover: ICC (Integrated Concealed Crossover) — slope not confirmed Cone: Carbon fibre and polypropylene injection-moulded composite Surround: Butyl rubber Basket: Not specified — confirm with Rockford Fosgate OEM adapter plate: Not mentioned — confirm with Rockford Fosgate Grilles: Included ✓ Mounting hardware: Included (confirmed in description) Sold as: Pair (2 speakers — confirmed in description) CEA-2031 compliant: Not stated — confirm with Rockford Fosgate Cutout dimensions: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 3-Way Configuration — Three Independent Drivers — Three driver elements handle the bass (woofer), midrange (dedicated midrange), and high frequencies (aluminium dome tweeter) independently. The dedicated midrange covers the critical 500Hz to 5kHz vocal and instrumental range without requiring the woofer or tweeter to compromise their performance outside their optimal operating bands. 100W RMS Power Handling — 100W RMS is confirmed per speaker — the highest RMS rating across the Power series coaxial oval range, providing substantial headroom for amplified operation. Carbon Fibre and Polypropylene Composite Cone — The injection-moulded composite delivers a lighter, stiffer diaphragm than standard polypropylene for improved midrange accuracy and transient response. Aluminium Dome Tweeter with Polyurethane Suspension — Fast, detailed high-frequency output with controlled resonance damping from the polyurethane suspension. ICC — Integrated Concealed Crossover — Crossover circuitry built into the tweeter assembly — no external crossover box required. Crossover slope and frequency are not confirmed in the supplier data — pull from the official T1693 datasheet. Butyl Rubber Surround — UV and heat-resistant synthetic rubber for long-term durability in Australian vehicle conditions. Grilles and Mounting Hardware Included — Complete kit for a finished, ready-to-install factory replacement in 6"×9" oval speaker positions. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T1693 Series Power Speaker Size 6"×9" (oval) Configuration 3-Way Coaxial Power Handling (RMS) 100W per speaker ✓ Peak Power Not specified — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Mounting Depth Not specified — confirm with Rockford Fosgate Tweeter Aluminium Dome, Polyurethane Suspension (size TBC) Crossover ICC — slope not confirmed Cone Carbon Fibre & Polypropylene Composite Surround Butyl Rubber Basket Not specified — confirm with Rockford Fosgate OEM Adapter Plate Not mentioned — confirm with Rockford Fosgate Grilles Included ✓ Mounting Hardware Included ✓ Sold As Pair (2 speakers) ✓ CEA-2031 Compliant Not confirmed Cutout Dimensions Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Factory 6"×9" oval rear deck, parcel shelf, and door panel speaker positions Common rear deck format across Australian passenger vehicles Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer for bass below the T1693's confirmed lower frequency limit (TBC) Frequently Asked Questions What does the 3-way configuration add over a standard 2-way speaker? A 3-way speaker adds a dedicated midrange driver to the woofer and tweeter. The midrange driver handles the 500Hz to 5kHz frequency range — covering vocals, guitar, piano, and the majority of melodic instrument content — independently from both the woofer and tweeter. This typically produces improved midrange clarity and presence compared to a 2-way design. Are grilles and mounting hardware included with the T1693? Yes — the product description confirms the kit includes grilles, integrated crossovers, and mounting hardware. What technical specifications are confirmed for the T1693? 100W RMS power handling, 3-way configuration, grilles included, mounting hardware included, carbon fibre composite cone, aluminium dome tweeter with polyurethane suspension, ICC crossover, butyl rubber surround, and sold as a pair are confirmed. Impedance, sensitivity, frequency response, mounting depth, and crossover specification must be pulled from the official Rockford Fosgate T1693 datasheet before publishing. What is the ICC crossover and how does it work in a 3-way speaker? ICC (Integrated Concealed Crossover) means the crossover circuitry is built into the tweeter assembly — no external crossover box is required. In a 3-way configuration, the crossover divides the signal between the midrange and tweeter at a defined frequency point, with the woofer handling frequencies below the midrange crossover point. Crossover frequency details are not confirmed in the supplier data — pull from the Rockford Fosgate T1693 datasheet. How do I confirm this speaker fits my vehicle? Confirm your vehicle's 6"×9" oval speaker position dimensions and available mounting depth with a vehicle-specific fit guide or the Rockford Fosgate online fit guide. Mounting depth and exact cutout dimensions are not confirmed in the supplier data and must be obtained from the official T1693 datasheet. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" Shallow 4-Ohm DVC Subwoofer 200W RMS, Elevated Shallow Motor Assembly, Mica-Injected Polypropylene Cone, StampCast Basket. Sealed Enclosure Only. Product Overview The Rockford Fosgate Prime R2SD4-10 is a 10" 4-Ohm Dual Voice Coil (DVC) shallow subwoofer rated at 200W RMS the 4-Ohm variant of the R2SD shallow platform. The elevated motor structure reduces mounting depth for installation in under-seat, behind-seat, and other tight-space enclosures. Optimised for sealed enclosures only. The 4-Ohm DVC provides wiring options of 2-Ohm (parallel), 8-Ohm (series), or 4-Ohm per coil for bi-amplification broader amplifier compatibility than the 2-Ohm DVC R2SD2-10 variant. Sold as an individual unit. Construction is consistent with the R2SD platform: mica-injected polypropylene cone, anodized aluminium voice coil former, linear spider with embedded 16 AWG tinsel leads, StampCast basket with integrated spider venting, 12 AWG compression terminals, and integrated PVC trim ring. Key Specifications Subwoofer size: 10 inch (shallow) Voice coil configuration: Dual Voice Coil (DVC) Impedance: 4-Ohm per coil (2-Ohm parallel / 8-Ohm series / 4-Ohm biamp) Power handling (RMS): 200W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Motor assembly: Shallow (elevated motor structure) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Mounting depth: Shallow — exact depth not confirmed (confirm with Rockford Fosgate) Voice coil former: Anodized aluminium Cone: Mica-injected polypropylene Surround: Not specified — confirm with Rockford Fosgate Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Input terminals: 12 AWG compression terminals Trim ring: Integrated PVC Enclosure compatibility: Sealed only ✓ Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Shallow Motor Assembly — Elevated motor structure reduces mounting depth for installation in locations where standard-depth subwoofers will not fit — under seats, behind rear seats, and custom shallow enclosures. Sealed Enclosure Only — Optimised for sealed enclosures exclusively. Do not use in a vented enclosure. Sealed loading produces tight, accurate bass output matched to the shallow motor's design parameters. 200W RMS Power Handling — Confirmed per the product description — appropriate for sealed shallow-mount applications with a matched mono amplifier. 4-Ohm DVC — Three Wiring Options: 2-Ohm (parallel): Maximum amplifier output — compatible with most 2-Ohm-rated mono amplifiers 8-Ohm (series): Suits amplifiers with minimum impedance requirements above 4-Ohm 4-Ohm per coil (biamp): Each coil to a separate amplifier channel Mica-Injected Polypropylene Cone — Stiffened polypropylene for accurate, clean bass reproduction with moisture resistance. StampCast Basket with Integrated Spider Venting — Motor cooling via basket ventilation during sustained operation. Anodized Aluminium Voice Coil Former — Improved heat radiation for extended thermal capacity. 12 AWG Compression Terminals — Secure, low-resistance connection for 200W RMS operation. Linear Spider with Embedded 16 AWG Tinsel Leads — Consistent compliance; integrated leads reduce flex fatigue failure. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R2SD4-10 Series Prime R2 Subwoofer Size 10 inch (shallow) Voice Coil Dual Voice Coil (DVC) Impedance per Coil 4-Ohm ✓ Wiring Options 2-Ohm (parallel) / 8-Ohm (series) / 4-Ohm biamp ✓ Power Handling (RMS) 200W ✓ Peak Power Not specified Motor Assembly Shallow (Elevated Motor Structure) ✓ Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Xmax Not specified — confirm with Rockford Fosgate Mounting Depth Shallow — exact depth not confirmed Voice Coil Former Anodized Aluminium Cone Mica-Injected Polypropylene Surround Not specified — confirm with Rockford Fosgate Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Input Terminals 12 AWG Compression Terminals Trim Ring Integrated PVC Enclosure Type Sealed Only ✓ Cutout Diameter Not specified — confirm with Rockford Fosgate Sold As Individual Unit Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Enclosure — sealed only: The R2SD4-10 must be used in a sealed enclosure. Do not install in a vented (ported) enclosure. Wiring configurations: 2-Ohm → both coils in parallel (most common) 8-Ohm → both coils in series 4-Ohm per coil → biamp Pairs well with: Rockford Fosgate T1000-1BDCP or T1500-1BDCP mono amplifiers at the appropriate impedance A shallow sealed 10" enclosure to Rockford Fosgate's recommended volume specifications Frequently Asked Questions Can the R2SD4-10 be used in a ported enclosure? No — the R2SD4-10 is optimised for sealed enclosures only. The shallow motor assembly is specifically matched to sealed box loading. A ported enclosure will not produce correct performance and may result in driver damage. What are the wiring options for the 4-Ohm DVC? The 4-Ohm DVC provides three configurations: 2-Ohm (both coils in parallel — most common), 8-Ohm (both coils in series), and 4-Ohm per coil for bi-amplification. What mounting depth is required for the R2SD4-10? The supplier confirms a shallow motor assembly but the exact mounting depth in millimetres is not stated. Pull the official Rockford Fosgate R2SD4-10 datasheet for the confirmed depth before purchasing for any tight-space installation. What sealed enclosure volume is recommended? Enclosure volume for the sealed configuration is not confirmed in the supplier data. Pull the official Rockford Fosgate R2SD4-10 datasheet for the recommended net internal volume. What amplifier power is appropriate? 200W RMS at the selected wiring impedance. Confirm the amplifier's RMS output at 2-Ohm (parallel) before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-1200X1 Prime 1200 Watt Mono Class D Amplifier When your subwoofer demands serious power, the R2-1200X1 delivers 1200 watts of efficient Class D performance with the tuning tools to control every dimension of your bass. Product Overview The R2-1200X1 is part of Rockford Fosgate's 3rd generation Prime Series, developed for car audio enthusiasts who want a high-output monoblock amplifier without stepping beyond an accessible price point. Rated at 1200 watts RMS into 1 ohm, it operates as a Class D monoblock designed specifically for subwoofer duty, with a frequency response limited to 20-250 Hz and support for 4 ohm, 2 ohm, and 1 ohm mono configurations. This 1-ohm stability makes it compatible with a wide range of dual voice coil subwoofer wiring options. Beyond raw power, the R2-1200X1 is equipped with an integrated Punch EQ for up to 18 dB of bass boost at 45 Hz, a variable Infrasonic Filter to protect the subwoofer from damaging subsonic frequencies, and an included RLC Remote Level Control for convenient bass adjustment from the driver's seat. MEHSA 4 thermal management and Rollback Protection ensure sustained reliability under high-demand conditions, while NOMAD actively monitors outputs against shorts and impedance faults. Greater than 80% average efficiency means lower current draw relative to output, reducing the electrical burden on the vehicle's charging system. Designed and engineered in Tempe, Arizona, the R2-1200X1 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red) to accurately match the source unit's output to the amplifier's input sensitivity, removing distortion before it reaches the subwoofer. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. Integrated Punch EQ: Continuously variable onboard bass equaliser providing 0 to +18 dB of boost at 45 Hz, correcting for acoustic deficiencies in the listening environment and delivering up to 3x the perceived bass without an external processor. Variable Infrasonic Filter: Adjustable high-pass filter operating from 15 to 40 Hz at 12 dB/octave Butterworth, removing subsonic frequencies that cause excessive cone excursion and voice coil stress without contributing audible bass output. MEHSA 4 (Maximum Efficiency Heat Sink Application): Advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained high-power use. Rollback Protection: During demanding musical conditions, the amplifier dynamically reduces power demand to prevent stress on output devices, preserving both the amplifier and the connected subwoofer under real-world listening conditions. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's speaker output and protects against shorted speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. 1-Ohm Stable Operation: Supports 4 ohm, 2 ohm, and 1 ohm mono loads, giving full compatibility with dual voice coil subwoofers wired to 1 ohm and maximising available output power for high-excursion applications. Includes RLC Remote Level Control: A remote level control is included in the box, allowing bass output to be adjusted from the driver's seat without accessing the amplifier directly. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V), making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing a full-range amplifier to be added downstream without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-1200X1 Series Prime Number of Channels 1 Amplifier Class Class D Total RMS Power 1200W RMS Power @ 4 Ohm 400W x 1 RMS Power @ 2 Ohm 800W x 1 RMS Power @ 1 Ohm 1200W x 1 Dynamic Power @ 4 Ohm 489W x 1 Dynamic Power @ 2 Ohm 889W x 1 Dynamic Power @ 1 Ohm 1389W x 1 Bridgeable No Minimum Impedance 1 Ohm Frequency Response 20 Hz - 250 Hz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% THD @ 1 Ohm <1.0% Average Efficiency >80% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input 2 x RCA low-level, 4-Pin Molex high-level Signal Output 2 x RCA pass-through (active with RCA or high-level input) Punch EQ 0 to +18 dB @ 45 Hz Low-Pass Crossover 50-250 Hz @ 12 dB/octave Butterworth Infrasonic Filter 15-40 Hz @ 12 dB/octave Butterworth Remote Controls Yes (RLC Remote Level Control included) Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT (Blue/Red) Operating Voltage 9-16V DC Max Current Draw (13.8V Sinewave) 121A Recommended Fuse 200A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 11.3" (4.9 cm x 17.3 cm x 28.5 cm) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-1200X1 is built to drive Rockford Fosgate Prime R2 and Punch P2 subwoofers hard, including the R2D2-12, R2D4-12, P2D2-12, and P2D4-12, with dual voice coil variants wiring cleanly to the 1-ohm or 2-ohm load the amplifier handles most efficiently. A high-current amplifier wiring kit is essential given the 121A maximum current draw, with 4-gauge power and ground cable as the minimum specification. A quality pair of RCA interconnects is recommended for clean signal transfer from the head unit. For systems requiring speaker channel amplification alongside this monoblock, the R2-1200X1 pairs directly with the R2-300X4 or R2-200X2 using the onboard RCA pass-through output. Frequently Asked Questions What subwoofer impedance works best with the R2-1200X1? The R2-1200X1 delivers its full rated 1200 watts RMS into a 1-ohm mono load, making it best suited to dual voice coil subwoofers wired in parallel to reach 1 ohm. It also operates at 800 watts into 2 ohms and 400 watts into 4 ohms, giving flexibility across a wide range of subwoofer configurations. Confirm the final wired impedance of the subwoofer before connecting to avoid operating below the 1-ohm minimum. What does the Infrasonic Filter do, and why does it matter at 1200 watts? The variable Infrasonic Filter removes subsonic frequencies below 15-40 Hz (adjustable) that are inaudible to the human ear but cause extreme cone excursion and voice coil stress, particularly at high power. At 1200 watts, uncontrolled subsonic content can quickly exceed a subwoofer's mechanical limits. Setting the Infrasonic Filter correctly protects the subwoofer and allows the amplifier to focus its full output within the audible bass range. Does the R2-1200X1 include a remote bass control? Yes. An RLC Remote Level Control is included in the box. It connects to the remote level control input on the amplifier and allows the driver to adjust bass output from a convenient dash-mounted position without accessing the amplifier directly, which is especially practical when the amplifier is installed in a boot or under a seat. What does Rollback Protection do at high power levels? During sustained high-demand listening conditions, Rollback Protection dynamically reduces the amplifier's power output to prevent thermal stress on the output devices. Rather than triggering a full protection shutdown, it maintains audio playback at a reduced level, protecting both the amplifier and the connected subwoofer while keeping the system running. What wiring is required for the R2-1200X1, and is the fuse included? The R2-1200X1 requires 4 AWG power and ground wire using the onboard compression terminal block connectors and 8 AWG speaker wire for the subwoofer output. The recommended 200A fuse is not included in the box and must be sourced separately. Given the 121A maximum current draw, the fuse must be installed in the power cable as close to the battery as possible to protect the vehicle's wiring. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12" 4-Ohm DVC Punch P2 Subwoofer 400W RMS, Kevlar Cone, VAST, Dual Spider, Diamond-Cut Cast Aluminium Trim Ring, Extended Pole Piece. Product Overview The Rockford Fosgate Punch P2D4-12 is a 12" 4-Ohm Dual Voice Coil (DVC) subwoofer rated at 400W RMS the 4-Ohm variant of the 12" Punch P2 platform. Identical construction to the P2D2-12 with the sole difference being 4-Ohm voice coil impedance per coil, providing wiring options of 2-Ohm (parallel), 8-Ohm (series), or 4-Ohm per coil for bi-amplification broader amplifier compatibility than the 2-Ohm variant without the 1-Ohm parallel concern. Optimised for sealed and vented enclosures. Sold as an individual unit. All confirmed Punch P2 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, dual linear spider with embedded 16 AWG tinsel leads, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, diamond-cut cast aluminium trim ring with grille provision, and protective PVC textured magnet cover. Key Specifications Subwoofer size: 12 inch Voice coil configuration: Dual Voice Coil (DVC) Impedance: 4-Ohm per coil (2-Ohm parallel / 8-Ohm series / 4-Ohm biamp) Power handling (RMS): 400W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Dual linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: Features: push — confirm vs compression with Rockford Fosgate Trim ring: Diamond-cut cast aluminium (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 4-Ohm DVC — Broad Amplifier Compatibility, No 1-Ohm Requirement: 2-Ohm (parallel): Most common — compatible with 2-Ohm mono amplifiers 8-Ohm (series): For amplifiers with higher minimum impedance 4-Ohm per coil (biamp): Separate amplifier channels 400W RMS — Confirmed 400W RMS — same as P2D2-12. Requires an amplifier rated at 400W RMS at the selected impedance. 12" Cone — Greater air movement and lower frequency extension than the 10" P2 models. Dual Linear Spider — Improved compliance linearity and cone control at high excursion. Kevlar Fibre-Reinforced Paper Cone with VAST — Stiffness and breakup resistance plus up to 25% increased effective cone area. Nomex® Voice Coil Collar — Thermal and mechanical reinforcement at 400W sustained. Extended Pole Piece and Bumped Vented Backplate — Increased Xmax; air spring prevention. Diamond-Cut Cast Aluminium Trim Ring — Premium machined aluminium finish with grille provision. StampCast Basket with Integrated Spider Venting — Motor cooling during operation. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P2D4-12 Series Punch P2 Subwoofer Size 12 inch Voice Coil Dual Voice Coil (DVC) Impedance per Coil 4-Ohm ✓ Wiring Options 2-Ohm (parallel) / 8-Ohm (series) / 4-Ohm biamp ✓ Power Handling (RMS) 400W ✓ Peak Power Not specified Sensitivity Not specified Fs / Xmax / Qts Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified Mounting Depth Not specified Surround Technique VAST ✓ Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Dual Linear, Embedded 16 AWG Tinsel Leads ✓ Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals Features: push — confirm vs compression with Rockford Fosgate Trim Ring Diamond-Cut Cast Aluminium (Grille Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ CEA-2031 Compliant Not confirmed Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed and vented — both confirmed Wiring: 2-Ohm → parallel 8-Ohm → series 4-Ohm per coil → biamp Pairs well with: Rockford Fosgate T1500-1BDCP or T2500-1BDCP mono amplifiers — confirm RMS output at 2-Ohm matches 400W Frequently Asked Questions What is the difference between P2D4-12 and P2D2-12? Both are identical 12" Punch P2 subwoofers with the same 400W RMS and construction. The sole difference is impedance: P2D4-12 is 4-Ohm per coil (2-Ohm parallel / 8-Ohm series), P2D2-12 is 2-Ohm per coil (1-Ohm parallel / 4-Ohm series). The 4-Ohm DVC avoids the 1-Ohm parallel requirement and is more broadly compatible with most mono amplifiers. What amplifier power is appropriate? 400W RMS at the selected wiring impedance. Confirm the amplifier's RMS output at 2-Ohm (parallel) or 4-Ohm before purchasing. What enclosure volume is recommended? Not confirmed in the supplier data. Pull the official Rockford Fosgate P2D4-12 datasheet for sealed and vented volume recommendations. Is a grille available? The diamond-cut cast aluminium trim ring accommodates an optional grille insert. Confirm the compatible SKU with Rockford Fosgate. What terminal type does the P2D4-12 use? The features list states "nickel plated push terminals." The P2D4-10 spec table indicates "compression terminals" — a conflict present across the P2 range. Confirm with Rockford Fosgate. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6.5" Euro Fit Component System ICC Internal Crossover, FlexFit2, Aluminium Frame, VAST Santoprene Surround. No External Crossover Box Required. Product Overview The Rockford Fosgate Punch P165-SI is a 6.5" 2-way component speaker system engineered for compatibility with European and import vehicles alongside North American platforms featuring the FlexFit2 basket designed to fit VW, Citroën, Vauxhall, and a wide range of other European OEM mounting profiles. The system uses an ICC (Integrated Concealed Crossover) with a confirmed 12dB/octave slope built into the tweeter assembly, eliminating the need to mount a separate crossover box inside the door or cabin. Construction throughout reflects a premium specification: stamp-cast aluminium frame, VAST (Vertical Attach Surround Technique) surround geometry, Santoprene thermoplastic elastomer surround, 1" treated PEI dome tweeter with DDC (Discrete Dual Clamp) mounting, mineral-filled polypropylene cone, and linear high-excursion motor design. Grilles and mounting hardware are confirmed included. Technical specifications power handling, impedance, sensitivity, frequency response, and mounting depth are not provided in the supplier data and must be pulled from the official Rockford Fosgate P165-SI datasheet before publishing. Key Specifications Woofer size: 6.5 inch Configuration: 2-way component (separate woofer + tweeter) Power handling (RMS): Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Woofer mounting depth: Not specified — confirm with Rockford Fosgate Tweeter: 1" treated PEI dome Tweeter mounting: DDC (Discrete Dual Clamp) — flush and surface (angled) Crossover: ICC (Integrated Concealed Crossover) — 12dB/octave (confirmed slope) Crossover point: Not specified — confirm with Rockford Fosgate Cone: Injection-moulded mineral-filled polypropylene Surround: Santoprene (thermoplastic elastomer) Surround technique: VAST (Vertical Attach Surround Technique) Frame: Stamp-cast aluminium Basket: FlexFit2 (Euro Fit) Grilles: Included Mounting hardware: Included Kit contents: 2 woofers + 2 tweeters + ICC crossovers + grilles + hardware CEA-2031 compliant: Not stated — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits FlexFit2 Basket — Euro Fit Compatible — The second-generation FlexFit basket is specifically engineered to accommodate the OEM speaker mounting profiles found in VW, Citroën, Vauxhall, and a broad range of other European and import vehicles that standard round baskets do not fit. ICC Internal Crossover — 12dB/Octave, No External Box — The crossover circuitry is built into the tweeter assembly at a confirmed 12dB/octave slope, eliminating the need to mount a separate crossover unit inside the door or cabin. The crossover point (Hz) is not confirmed in the supplier data — pull from the official Rockford Fosgate P165-SI datasheet. Stamp-Cast Aluminium Frame — An aluminium frame is stiffer and lower in mass than stamped steel — reducing frame resonance that can colour the speaker's output. A premium construction element appropriate for this tier of component system. VAST — Vertical Attach Surround Technique — Rockford Fosgate's proprietary surround attachment geometry positions the surround vertically at the cone edge, increasing the effective radiating area of the cone for a given driver diameter and improving the linearity of cone movement at the surround interface. Santoprene Rubber Surround — Santoprene is a thermoplastic vulcanizate (TPV) elastomer with excellent UV resistance, temperature stability, and flexural fatigue performance — providing long-term durability appropriate for Australian vehicle environments. 1" Treated PEI Dome Tweeter — A 1" (25mm) PEI dome tweeter with surface treatment (treatment process not specified — confirm with Rockford Fosgate) for improved high-frequency performance. PEI (Polyetherimide) is a rigid engineering thermoplastic producing precise, extended treble reproduction. DDC Tweeter Mounting System — Discrete Dual Clamp provides flush and angled surface mounting hardware — two installation positions for optimal tweeter directional alignment. Linear High-Excursion Motor Design — Matched motor magnetics and suspension design for controlled, low-distortion cone movement across a wide excursion range at high output levels. Grilles and Mounting Hardware Included — Complete installation kit for a finished installation in European and import vehicle positions. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P165-SI Series Punch Woofer Size 6.5 inch Configuration 2-Way Component Power Handling (RMS) Not specified — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Woofer Mounting Depth Not specified — confirm with Rockford Fosgate Tweeter 1" Treated PEI Dome Tweeter Mounting DDC (flush and surface/angled) Crossover ICC (Integrated Concealed) — 12dB/octave ✓ Crossover Point Not specified — confirm with Rockford Fosgate Cone Injection-Moulded Mineral-Filled Polypropylene Surround Santoprene (TPV elastomer) Surround Technique VAST Frame Stamp-Cast Aluminium Basket FlexFit2 (Euro Fit) Grilles Included ✓ Mounting Hardware Included ✓ Kit Contents 2 woofers + 2 tweeters + ICC crossovers + grilles + hardware CEA-2031 Compliant Not confirmed Cutout Diameter Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Designed for: European and import vehicles with non-standard OEM speaker mounting profiles (FlexFit2) VW, Citroën, Vauxhall, and compatible European models Standard North American and Australian 6.5" positions also supported Fitment caution: Woofer mounting depth and cutout diameter not confirmed. Confirm with Rockford Fosgate or a vehicle-specific fit guide before purchasing. Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer system for bass below the P165-SI's confirmed lower frequency limit (TBC) Frequently Asked Questions What makes the P165-SI "Euro Fit" compatible? The FlexFit2 basket is designed to accommodate the OEM speaker mounting geometries used in VW, Citroën, Vauxhall, and other European and import vehicles — where standard round baskets do not physically fit the factory mounting locations without modification. Always confirm specific vehicle compatibility with the Rockford Fosgate fit guide before purchasing. What is VAST and how does it benefit the speaker? VAST (Vertical Attach Surround Technique) is Rockford Fosgate's proprietary surround attachment geometry. By attaching the surround vertically rather than at the conventional angle, VAST increases the effective radiating area of the cone for a given driver diameter — improving efficiency and output relative to the cone's physical size. What crossover does the P165-SI use and where is it mounted? The P165-SI uses an ICC (Integrated Concealed Crossover) built into the tweeter assembly at a 12dB/octave slope. No separate crossover box requires mounting — the crossover is entirely concealed within the tweeter unit. Crossover frequency point (Hz) is not confirmed in the supplier data — pull from the official Rockford Fosgate P165-SI datasheet. What is Santoprene and why is it used for the surround? Santoprene is a thermoplastic vulcanizate (TPV) elastomer — a synthetic rubber compound with excellent UV resistance, temperature stability, and long-term flexural fatigue performance. These durability characteristics make it appropriate for Australian vehicle conditions where door panel temperatures and UV exposure can be significant. What technical specifications are confirmed for the P165-SI? Kit contents (2 woofers + 2 tweeters + ICC crossovers + grilles + hardware), ICC crossover at 12dB/octave, 1" treated PEI dome tweeter, FlexFit2 basket, aluminium frame, VAST surround technique, Santoprene surround, and DDC tweeter mounting are all confirmed. Power handling, impedance, sensitivity, frequency response, and mounting depth must be pulled from the official Rockford Fosgate P165-SI datasheet before publishing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6"×9" 2-Way Power Series Coaxial 100W RMS, 90dB, 50Hz–22kHz, CEA-2031. Carbon Fibre Cone, Aluminium Dome Tweeter, 12dB/Octave Butterworth Crossover. Product Overview The Rockford Fosgate Power T1692 is a 6"×9" 2-way coaxial speaker rated at 100W RMS (200W peak) the highest-powered and most sensitive model in the Power series coaxial range in this catalogue. Confirmed specifications include 4-Ohm impedance, 90dB sensitivity at 1W/1M, 50Hz to 22kHz frequency response, 87mm (3.43") mounting depth, a 1" (25.4mm) aluminium dome tweeter with 12dB/octave Butterworth HP crossover, and CEA-2031 compliance. Grilles are confirmed included. The T1692 uses the Power series carbon fibre and polypropylene composite cone, aluminium dome tweeter with polyurethane suspension, butyl rubber surround, and ICC (Integrated Concealed Crossover). Shipping weight is confirmed at 5.72 kg per pair. Key Specifications Speaker size: 6"×9" (oval) Configuration: 2-way coaxial Power handling (RMS): 100W per speaker (CEA-2031 compliant) Power handling (peak): 200W per speaker Impedance: 4-Ohm Sensitivity: 90dB @ 1W/1M Frequency response: 50Hz – 22kHz Mounting depth: 3.43" (87mm) Tweeter: Aluminium dome, 1" (25.4mm), polyurethane suspension Crossover: Built-in HP 12dB/octave Butterworth (ICC) Cone: Carbon fibre and polypropylene injection-moulded composite Surround: Butyl rubber Basket: Not specified — confirm with Rockford Fosgate OEM adapter plate: Not mentioned — confirm with Rockford Fosgate Grilles: Included ✓ Mounting hardware: Not mentioned  Sold as: Pair (2 speakers — confirmed in description) CEA-2031 compliant: Yes Shipping weight: 12.6 lbs (5.72 kg) per pair Cutout dimensions: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 100W RMS CEA-2031 — 100W RMS is the highest confirmed power rating in the Power series coaxial range, confirmed to the CEA-2031 industry standard. The 200W peak rating provides headroom for dynamic programme material. 90dB Sensitivity — At 90dB, the T1692 is the most efficient confirmed Power series coaxial in this catalogue — producing the highest sound pressure level per watt, performing well from both factory head unit power and amplified installations. 50Hz – 22kHz Frequency Response — A lower limit of 50Hz from a 6"×9" oval covers substantial bass content including bass guitar, kick drum, and lower vocal fundamentals — meaningful low-frequency extension without requiring a subwoofer for moderate listening levels. 87mm Mounting Depth — At 3.43" (87mm), the T1692 is deep. Confirm that the available door cavity depth in your vehicle can accommodate 87mm before purchasing — this is a critical fitment measurement for rear deck and door installations. 1" Aluminium Dome Tweeter with 12dB/Octave Butterworth Crossover — A 1" (25.4mm) aluminium dome with polyurethane suspension delivers fast, detailed high-frequency output. The built-in 12dB/octave Butterworth ICC provides a maximally flat frequency response through the crossover region for smooth treble integration. Carbon Fibre and Polypropylene Composite Cone — The injection-moulded composite delivers a lighter, stiffer diaphragm than standard polypropylene — improving midrange accuracy and transient response. Butyl Rubber Surround — UV and heat-resistant synthetic rubber for long-term reliability in Australian vehicle conditions. Grilles Included — Confirmed grille inclusion for a finished appearance. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T1692 Series Power Speaker Size 6"×9" (oval) Configuration 2-Way Coaxial Power Handling (RMS) 100W per speaker ✓ (CEA-2031) Power Handling (Peak) 200W per speaker ✓ Impedance 4-Ohm ✓ Sensitivity 90dB @ 1W/1M ✓ Frequency Response 50Hz – 22kHz ✓ Mounting Depth 3.43" (87mm) ✓ Tweeter Aluminium Dome, 1" (25.4mm), Polyurethane Suspension ✓ Crossover HP 12dB/Octave Butterworth (ICC) ✓ Cone Carbon Fibre & Polypropylene Composite Surround Butyl Rubber Basket Not specified — confirm with Rockford Fosgate CEA-2031 Compliant Yes ✓ Grilles Included ✓ Mounting Hardware Not mentioned OEM Adapter Plate Not mentioned — confirm with Rockford Fosgate Sold As Pair (2 speakers) ✓ Shipping Weight 12.6 lbs / 5.72 kg per pair ✓ Cutout Dimensions Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Factory 6"×9" oval rear deck, parcel shelf, and door panel speaker positions Common rear deck format across a wide range of Australian passenger vehicles Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer for bass below 50Hz Weight 5.72 kg per pair (shipping weight).  Frequently Asked Questions Is mounting hardware included with the T1692? The product description states that mounting hardware is included, while the specification table states "Mounting Hardware: No." This is a direct conflict in the supplier data. Confirm with Rockford Fosgate before purchasing. What is the confirmed mounting depth for the T1692? 3.43" (87mm) — confirmed in the specification table. This is a substantial depth for a 6"×9" oval speaker. Many rear deck and door installations have limited cavity depth; confirm your vehicle's available depth before purchasing. What are the confirmed power and sensitivity specifications? 100W RMS (CEA-2031 compliant) and 90dB sensitivity at 1W/1M are both confirmed. These are the highest confirmed figures in the Power series coaxial range in this catalogue. What crossover does the T1692 use? A built-in 12dB/octave Butterworth high-pass crossover (ICC) — integrated into the tweeter assembly. The Butterworth alignment produces a maximally flat frequency response through the crossover region. Crossover frequency point (Hz) is not confirmed in the supplier data — pull from the official Rockford Fosgate T1692 datasheet. What is the difference between the 100W RMS and 200W peak ratings? RMS is the sustained continuous power the speaker safely handles over time — the relevant figure for amplifier matching. Peak (200W) is the transient power the speaker can briefly handle during dynamic programme peaks. Always match amplifier output to the RMS rating. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12" Punch P2 and P3 Stamped Steel Grille Insert Black. Fits Gen-3 P2 and P3 Trim Rings. Protects Against Cone and Surround Damage. Product Overview The Rockford Fosgate P2P3G-12 is a 12" stamped steel mesh grille insert in black designed for Gen-3 Punch P2 and P3 standard-depth 12" subwoofers. The grille inserts into the diamond-cut cast aluminium trim ring already fitted to the subwoofer no additional hardware required. The trim ring (included with the P2 or P3 subwoofer) holds the grille securely in position. Compatible with both the Punch P2 and Punch P3 12" platforms in a single SKU both series share Gen-3 trim ring dimensions. This grille is for standard-depth P2 and P3 12" subwoofers not the P3S shallow series, which uses the P3SG-12 grille. Confirm the generation of your subwoofer before purchasing. Key Specifications Part number: P2P3G-12 Compatible size: 12 inch (standard depth) ✓ Grille type: Stamped mesh insert ✓ Material: Stamped steel ✓ Colour: Black ✓ Fitment: Inserts into Gen-3 P2 and P3 trim rings ✓ Trim ring required: Yes — trim ring supplied with subwoofer ✓ Generation compatibility: Gen-3 P2 and P3 only ✓ Compatible series: Punch P2 and Punch P3 (12") ✓ Protection: Surround and cone damage ✓ Compatible SKUs: Select Gen-3 P2 and P3 12" models — confirm with Rockford Fosgate Pack quantity: Not confirmed — confirm with Rockford Fosgate Dimensions: Not confirmed — confirm with Rockford Fosgate Weight: Not confirmed Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits Covers Both P2 and P3 12" Platforms A single grille SKU compatible with both the Punch P2 (P2D2-12, P2D4-12) and Punch P3 (P3D2-12, P3D4-12) 12" subwoofers — both series use the same Gen-3 trim ring dimensions. Confirm exact compatibility with Rockford Fosgate. Stamped Steel Mesh — Physical Cone and Surround Protection The rigid steel mesh shields the 12" Kevlar (P2) or anodised aluminium (P3) cone and rubber surround from physical contact with boot cargo — preventing the cone and surround damage that results from unprotected subwoofers in active vehicle use. Trim Ring Insertion — Tool-Free Install Remove the trim ring from the subwoofer, insert the grille, re-secure the trim ring. No tools required. Reversible at any point. Gen-3 Specific Sizing Sized for Gen-3 P2 and P3 trim rings — not compatible with earlier-generation trim rings or the P3S shallow series. Confirm your subwoofer's generation before purchasing. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P2P3G-12 Series Punch P2 and P3 (Standard) Gen-3 Compatible Size 12 inch ✓ Grille Type Stamped Mesh Insert ✓ Material Stamped Steel ✓ Colour Black ✓ Fitment Inserts into Gen-3 P2 and P3 trim rings ✓ Trim Ring Required Yes (supplied with subwoofer) ✓ Generation Gen-3 P2 and P3 only ✓ Compatible Series Punch P2 and Punch P3 (12") ✓ Compatible SKUs Select Gen-3 models (confirm with Rockford Fosgate) Pack Quantity Not confirmed Dimensions Not confirmed Weight Not confirmed Warranty Not confirmed Compatible With / Goes Well With Confirmed compatible platform: Gen-3 Punch P2 and P3 12" standard-depth subwoofers — confirm specific SKUs with Rockford Fosgate Likely compatible (confirm before purchasing): Rockford Fosgate P2D2-12 Punch P2 12" 2-Ohm DVC Subwoofer Rockford Fosgate P2D4-12 Punch P2 12" 4-Ohm DVC Subwoofer Rockford Fosgate P3D2-12 Punch P3 12" 2-Ohm DVC Subwoofer Rockford Fosgate P3D4-12 Punch P3 12" 4-Ohm DVC Subwoofer Frequently Asked Questions Does the trim ring come with the P2P3G-12? No — the grille inserts into the trim ring already supplied with the P2 or P3 12" subwoofer. The P2P3G-12 is the grille insert only. Is this grille compatible with both P2 and P3 12" subwoofers? Yes — the P2P3G-12 is confirmed compatible with both Gen-3 Punch P2 and Punch P3 12" standard-depth subwoofers. Confirm the exact compatible SKUs with Rockford Fosgate before purchasing. Will this grille fit P3S shallow 12" subwoofers? No — the P3S shallow series uses a different trim ring and requires the P3SG-12. The P2P3G-12 is for standard-depth P2 and P3 subwoofers only. Is the P2P3G-12 sold as a single unit or a pair? Pack quantity is not confirmed. Confirm from the official Rockford Fosgate P2P3G-12 product page before ordering. Is there a grille available for 15" P2 and P3 subwoofers? Yes — the P2P3G-15 is the equivalent grille for the 15" P2 and P3 platform. A 10" equivalent (P2P3G-10) may also exist — confirm with Rockford Fosgate. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less