Custom Mount Your HEIGH10 Anywhere ABS Flush Mount Bucket for Fabrication Builds Product Overview The Stinger SE-HFDK is an ABS plastic flush mount bucket designed for custom installation of the Stinger HEIGH10 10" infotainment screen into a dash, trim panel, or fabricated enclosure. It allows the HEIGH10 screen to be mounted flush in a custom surface while retaining the ability to remove the screen when needed useful for service access or builds where the screen needs to be extracted without dismantling the surrounding trim. The SE-HFDK is the mounting bucket only the HEIGH10 infotainment system is not included. Key Specifications Manufacturer Part Number: SE-HFDK Function: Custom flush mount bucket for HEIGH10 screen Compatible products: Stinger HEIGH10 Material: ABS plastic Removable screen: Yes — allows easy removal of the 10" screen when needed HEIGH10 infotainment system: Not included Quantity: 1x ABS plastic screen bucket Features & Benefits Custom Flush Mount Capability — Enables the HEIGH10 10" screen to be mounted flush into a custom dash, trim panel, or fabricated surface, providing a clean factory-like result in non-standard installation locations. Easy Screen Removal — The bucket design allows the HEIGH10 screen to be removed without dismantling the surrounding trim or fabrication, preserving service access in custom builds. ABS Plastic Construction — Lightweight, rigid, and workable ABS plastic is suitable for trimming, painting, or integrating into custom panel builds. HEIGH10 Specific Fit — Designed specifically for the Stinger HEIGH10 10" screen dimensions for a precise, secure fit. Technical Specs Specification Detail Part Number SE-HFDK Brand Stinger Function Custom flush mount screen bucket Material ABS plastic Compatible Products Stinger HEIGH10 Screen Removable Yes HEIGH10 System Not included Quantity 1x ABS plastic bucket Compatible With / Goes Well With Stinger HEIGH10 infotainment system (sold separately) Custom dash fabrication and trim panel builds OEM-style and aftermarket dash panel projects requiring flush screen mounting Caution: The SE-HFDK is a mounting bucket only — the HEIGH10 infotainment system is not included. Confirm HEIGH10 screen dimensions against the bucket before beginning fabrication. Frequently Asked Questions Does the SE-HFDK include the HEIGH10 infotainment system? No — the SE-HFDK is the ABS plastic mounting bucket only. The HEIGH10 infotainment system must be purchased separately. What is the SE-HFDK used for? The SE-HFDK allows the HEIGH10 10" screen to be mounted flush into a custom dash panel, trim surface, or fabricated enclosure, providing a clean integrated result in non-standard installation locations. Can the HEIGH10 screen be removed after installation? Yes — the bucket design allows the HEIGH10 screen to be removed when needed without dismantling the surrounding trim or fabrication. What material is the SE-HFDK made from? The SE-HFDK is constructed from ABS plastic, which is lightweight, rigid, and suitable for trimming, painting, or integrating into custom panel builds. Is the SE-HFDK compatible with any other Stinger infotainment systems? The SE-HFDK is confirmed for use with the Stinger HEIGH10 only. Compatibility with other Stinger infotainment systems such as the ELEV8 is not confirmed by the supplier. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Clean Double DIN Fitment for the Mazda 6 GH Dash Panel, Mounting Cradle and Hardware Included Product Overview The Stinger SFDMA01 is a double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the 2008–2010 Mazda 6 GH chassis. The kit includes a dash panel, mounting cradle, and all necessary mounting cradle hardware providing more complete fitment hardware than a fascia-only kit, with the cradle ensuring a secure, professional head unit installation within the Mazda 6's factory dash opening. No head unit, wiring harness, or antenna adaptor is included. Key Specifications Manufacturer Part Number: SFDMA01 Vehicle compatibility: Mazda 6 GH 2008–2010 Head unit size: Double DIN Colour: Not specified Included: Dash panel, mounting cradle, mounting cradle hardware Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Dash Panel and Mounting Cradle Included — Unlike fascia-only kits, the SFDMA01 includes a mounting cradle and hardware alongside the dash panel, providing a complete fitment solution for securing the head unit within the Mazda 6 GH's factory opening. Mazda 6 GH Specific Fit — Designed specifically for the GH-chassis Mazda 6 (2008–2010), ensuring a precise fit without relying on generic adaptors. All Hardware Included — Mounting cradle hardware is supplied, reducing the need to source additional fasteners or brackets for installation. Technical Specs Specification Detail Part Number SFDMA01 Brand Stinger Colour Not specified Head Unit Size Double DIN Vehicle Compatibility Mazda 6 GH 2008–2010 Included Dash panel, mounting cradle, mounting cradle hardware Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Mazda 6 GH 2008, 2009, 2010 Standard double DIN aftermarket head units Frequently Asked Questions Does the SFDMA01 include a head unit or wiring harness? No — the SFDMA01 is a fascia and mounting kit. The head unit, wiring harness, and antenna adaptor are not included and will need to be sourced separately for a complete installation. What is included in the box? The SFDMA01 includes a dash panel, a mounting cradle, and all mounting cradle hardware. The mounting cradle is a notable inclusion over a basic fascia-only kit, providing a secure mount for the aftermarket head unit within the GH Mazda 6 dash. What size head unit does this kit suit? The SFDMA01 is designed for standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Is this kit compatible with other Mazda 6 generations? Compatibility is confirmed for the Mazda 6 GH chassis only (2008–2010). The earlier BK-chassis Mazda 6 (2002–2008) and later GJ-chassis (2012+) use different dash configurations and are not covered by this kit. Does this kit require any modification to the factory dash? No — the SFDMA01 is designed to fit the Mazda 6 GH's factory dash opening without cutting or permanently modifying the factory panel. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Tow With Confidence in Your Mitsubishi Wireless Trailer Camera Kit, No Cables, Factory Camera Kept Product Overview The Stinger TCMITSUKIT is a wireless trailer camera kit designed for select Mitsubishi vehicles fitted with an 8-pin Mitsubishi camera connector at the back of the factory radio. It makes reversing a caravan, horse float, or trailer straightforward without running video cabling through or along the rig. The Echomaster PCAM-WLP wireless camera transmits video up to 45 metres (without obstacles) to a receiver installed behind the dashboard, powered directly from the trailer's reverse lights. When the trailer is connected and reverse is engaged, the trailer camera automatically overrides the factory OEM reverse camera. When the trailer is disconnected, the factory camera resumes normal operation. If no factory camera is fitted, an aftermarket reverse camera can be integrated using this kit. The bundle includes the PCAM-WLP wireless camera, PAC PACAVS-21 audio/video switching unit, and the vehicle-specific Mitsubishi 8-pin harness (AXBUCH-MI6V). Compatible vehicles span the ASX, Challenger, Lancer (including Evolution), Outlander, Pajero, Pajero Sport, and Triton covering both MQ and MR Triton generations. Note: the kit is not fully plug-and-play the factory connector terminates in bare wires and some wiring is required. Key Specifications Manufacturer Part Number: TCMITSUKIT Function: Wireless trailer/caravan reverse camera kit Wireless camera: Echomaster PCAM-WLP Wireless range: Up to 45 metres (without obstacles) Wireless frequency: 2.4GHz with digital encryption Camera viewing angle: 140° Camera IP rating: IP67 (water and debris proof) Camera minimum illumination: 0.1 LUX Camera power supply: PWM — safe for CAN-controlled tail lights Camera operating temperature: -20°C to +65°C Vehicle connector: 8-pin Mitsubishi camera connector at back of factory radio Parking lines: No Factory reverse camera retention: Yes — overridden when trailer connected; resumes when disconnected Aftermarket camera fitment: Supported — if no factory camera fitted Mounting brackets: Included Plug & Play: Factory connector to bare wires — some wiring required Features & Benefits 45-Metre Wireless Range — The PCAM-WLP transmits video wirelessly up to 45 metres, eliminating the need to run cabling through caravans, horse floats, or trailers. 2.4GHz Digital Encrypted Wireless — Digital encryption on the 2.4GHz wireless link provides a stable, secure video signal. IP67 Waterproof Camera — Full IP67 rating makes the wireless camera suitable for trailer mounting in all weather conditions — rain, dust, mud, and debris. PWM Power Supply — CAN Bus Safe — The PCAM-WLP uses a PWM power supply, making it safe for use on Mitsubishi vehicles with CAN-controlled tail light circuits. Factory Camera Retained — Where fitted, the factory OEM reverse camera is retained. The trailer camera automatically takes priority when the trailer is connected and reverts when removed. 140° Wide Viewing Angle — A broad 140° field of view covers the full width of a trailer or caravan when reversing. Vehicle-Specific 8-Pin Harness — The AXBUCH-MI6V harness is included, matched to the 8-pin Mitsubishi connector at the back of the factory radio. PAC AV Switching Unit — The PACAVS-21 manages automatic input switching between factory and trailer cameras. Covers Key Mitsubishi Tow Vehicles — Compatible across the Triton MQ and MR, Pajero NT/NX, Pajero Sport, Outlander, ASX, Challenger, and Lancer CF — covering the core Mitsubishi towing range in Australia. Technical Specs Specification Detail Part Number TCMITSUKIT Brand Stinger Wireless Camera Echomaster PCAM-WLP Wireless Frequency 2.4GHz, digital encrypted Wireless Range Up to 45 metres (without obstacles) Viewing Angle 140° IP Rating IP67 Minimum Illumination 0.1 LUX Power Supply PWM — CAN bus safe Operating Temperature -20°C to +65°C Vehicle Connector 8-pin Mitsubishi (at back of factory radio) Parking Lines No Factory Camera Retention Yes — overridden when trailer connected; resumes when removed Aftermarket Camera Support Yes — if no factory camera fitted Mounting Brackets Included AV Switching Unit PAC PACAVS-21 Vehicle Harness AXBUCH-MI6V Plug & Play Factory connector to bare wires — some wiring required Compatible With / Goes Well With Mitsubishi ASX XB–XC 2013–2019 Mitsubishi Challenger PC 2013–2015 Mitsubishi Lancer CF 2014–2018 (including Evolution) Mitsubishi Outlander ZJ–ZK–ZL 2013–2021 Mitsubishi Pajero NT–NX 2015–2021 Mitsubishi Pajero Sport KR–KS–QE 2016–2018 Mitsubishi Triton MQ 2015–2018 Mitsubishi Triton MR 2019–2021 Caution: This kit uses the 8-pin Mitsubishi camera connector located at the back of the factory radio — confirm your vehicle has this connector before purchase. The kit connects factory connector to bare wires and requires some wiring — it is not fully plug-and-play. Parking guidelines are not provided on the trailer camera image. Frequently Asked Questions Does the trailer camera replace my factory reverse camera permanently? No — the trailer camera overrides the factory camera when the trailer is connected and reverse is engaged. When the trailer is disconnected, the factory OEM reverse camera resumes normal operation automatically. Do I need to run a cable through my caravan or trailer? No — the PCAM-WLP transmits wirelessly up to 45 metres. The camera is powered by the trailer's reverse lights and transmits to a receiver installed behind the dashboard with no video cable routed through the trailer. Is the wireless camera safe for CAN-controlled tail lights? Yes — the PCAM-WLP uses a PWM power supply designed for safe use on vehicles with CAN-controlled tail light circuits, which are common on modern Mitsubishi models. Is this kit compatible with the Mitsubishi Lancer Evolution? Yes — the Lancer CF (2014–2018) entry includes the Evolution variant as stated by the supplier. Confirm fitment with the supplier if your Evolution has any non-standard factory camera configuration. Will this kit show parking guidelines on the trailer camera image? No — parking lines are not provided on the trailer camera feed. The PCAM-WLP displays a raw camera view without overlay guidelines. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Tow With Confidence Across a Wide Range of Toyotas Wireless 16-Pin Trailer Camera Kit, No Cabling Required Product Overview The Stinger TCTOY1KIT is a wireless trailer camera kit designed for a broad range of Toyota vehicles fitted with a 16-pin Toyota camera connector, covering 22 Toyota model/chassis combinations and the Subaru Forester SJ (2013–2014) which shares the same connector. It makes reversing when towing a caravan, horse float, or trailer straightforward without running any video cable through the rig. The Echomaster PCAM-WLP wireless camera transmits video up to 45 metres (without obstacles) to a receiver installed behind the dashboard, powered directly from the trailer's reverse lights. When the trailer is connected and reverse is engaged, the trailer camera automatically overrides the factory OEM reverse camera. When the trailer is disconnected, the factory camera resumes normal operation. Where no factory camera is fitted, an aftermarket reverse camera can be integrated using this kit. The bundle includes the PCAM-WLP wireless camera, PAC PACAVS-21 audio/video switching unit, and the vehicle-specific Toyota 16-pin harness (AXBUCH-T16V). Note: this kit is not fully plug-and-play the factory connector terminates in bare wires and some wiring is required. Key Specifications Manufacturer Part Number: TCTOY1KIT Function: Wireless trailer/caravan reverse camera kit Wireless camera: Echomaster PCAM-WLP Wireless range: Up to 45 metres (without obstacles) Wireless frequency: 2.4GHz with digital encryption Camera viewing angle: 140° Camera IP rating: IP67 (water and debris proof) Camera minimum illumination: 0.1 LUX Camera power supply: PWM — safe for CAN-controlled tail lights Camera operating temperature: -20°C to +65°C Vehicle connector: 16-pin Toyota style connector Parking lines: No Factory reverse camera retention: Yes — overridden when trailer connected; resumes when disconnected Aftermarket camera fitment: Supported — if no factory camera fitted Mounting brackets: Included Plug & Play: Factory connector to bare wires — some wiring required Features & Benefits 45-Metre Wireless Range — The PCAM-WLP transmits video wirelessly up to 45 metres, eliminating the need to run cabling through caravans, horse floats, or trailers. 2.4GHz Digital Encrypted Wireless — Digital encryption on the 2.4GHz wireless link provides a stable, secure video signal. IP67 Waterproof Camera — Full IP67 rating makes the wireless camera suitable for trailer mounting in all weather conditions — rain, dust, mud, and debris. PWM Power Supply — CAN Bus Safe — The PCAM-WLP uses a PWM power supply, making it safe for use on modern Toyota vehicles with CAN-controlled tail light circuits. Factory Camera Retained — Where fitted, the factory OEM reverse camera is retained. The trailer camera automatically takes priority when the trailer is connected and reverts when removed. 140° Wide Viewing Angle — A broad 140° field of view covers the full width of a trailer or caravan when reversing. Vehicle-Specific 16-Pin Harness — The AXBUCH-T16V harness is included, matched to the 16-pin Toyota connector used across the compatible range. PAC AV Switching Unit — The PACAVS-21 manages automatic input switching between factory and trailer cameras. Broad Compatibility — 23 model/chassis combinations across 22 Toyota models and the Subaru Forester SJ, covering a wide range of vehicles from 2002 to 2020. Technical Specs Specification Detail Part Number TCTOY1KIT Brand Stinger Wireless Camera Echomaster PCAM-WLP Wireless Frequency 2.4GHz, digital encrypted Wireless Range Up to 45 metres (without obstacles) Viewing Angle 140° IP Rating IP67 Minimum Illumination 0.1 LUX Power Supply PWM — CAN bus safe Operating Temperature -20°C to +65°C Vehicle Connector 16-pin Toyota style Parking Lines No Factory Camera Retention Yes — overridden when trailer connected; resumes when removed Aftermarket Camera Support Yes — if no factory camera fitted Mounting Brackets Included AV Switching Unit PAC PACAVS-21 Vehicle Harness AXBUCH-T16V Plug & Play Factory connector to bare wires — some wiring required Compatible With / Goes Well With Subaru Forester SJ 2013–2014 Toyota 86 GSE/ZN6 2012–2017 (pre-facelift) Toyota 86 GSE/ZN6 2017–2020 (post-facelift) Toyota Aurion XV40 2006–2011 Toyota Aurion XV50 2012–2015 Toyota Camry XV40 2007–2011 Toyota Camry XV50 2012–2017 Toyota Corolla E120 2009–2012 Toyota Corolla Hatch E180 2013–2015 Toyota FJ Cruiser GSJ10 2010–2016 Toyota HiAce H200 2005–2019 Toyota HiLux AN10/AN20/AN30 2013–2015 Toyota LandCruiser Prado 120 Series 2002–2009 Toyota LandCruiser Prado 150 Series 2009–2013 — without factory navigation only Toyota Prius XW20 2004–2009 Toyota Prius XW30 2010–2015 Toyota Prius C XP130 2012–2018 Toyota Prius V ZVW40/ZVW41 2015–2019 Toyota RAV4 XA40 2012–2013 Toyota Rukus E150 2010–2014 Toyota Tarago XR50 2005–2017 Toyota Tundra XK50 2007–2013 Toyota Yaris XP90 2012–2014 Caution: This kit uses the 16-pin Toyota style connector — confirm your vehicle has this connector before purchase. The LandCruiser Prado 150 Series is compatible with non-navigation models only (2009–2013). The kit connects factory connector to bare wires and requires some wiring — it is not fully plug-and-play. Parking guidelines are not provided on the trailer camera image. The Subaru Forester SJ (2013–2014) is listed as compatible due to shared connector type — confirm fitment with the supplier before purchase. Frequently Asked Questions Does the trailer camera replace my factory reverse camera permanently? No — the trailer camera overrides the factory camera when the trailer is connected and reverse is engaged. When the trailer is disconnected, the factory OEM reverse camera resumes normal operation automatically. Do I need to run a cable through my caravan or trailer? No — the PCAM-WLP transmits wirelessly up to 45 metres. The camera is powered by the trailer's reverse lights and transmits to a receiver installed behind the dashboard with no video cable routed through the trailer. Is this kit compatible with the Subaru Forester? The Subaru Forester SJ 2013–2014 is listed as compatible by the supplier, as it uses the same 16-pin connector. Confirm fitment with the supplier before purchase if the Forester is your vehicle. Does the LandCruiser Prado 150 Series need to be non-navigation? Yes — the TCTOY1KIT is compatible with the LandCruiser Prado 150 Series (2009–2013) in non-navigation models only. Navigation-equipped 150 Series Prado models are not supported. Will this kit show parking guidelines on the trailer camera image? No — parking lines are not provided on the trailer camera feed. The PCAM-WLP displays a raw camera view without overlay guidelines. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Replace Your Toyota OEM Speakers with Aftermarket 6.5″ or 6×9″ Units No Adaptor Fabrication Required. Product Overview The Stinger BNSPTO691 is a set of OEM-style speaker adapter spacers designed to enable the installation of aftermarket 6.5″ speakers or 6×9″ speakers with minor trimming into a select range of Toyota, Holden, Isuzu, and Lexus vehicles. These adapters are purpose-built to replace the factory Toyota unconventional speaker mounting location, matching the OEM screw positions for a clean, hassle-free install without the need to fabricate custom adaptors. Sold as a pair and constructed from durable ABS plastic, the BNSPTO691 features a 143mm inner diameter and a 35mm mounting depth. For 6.5″ speaker installation, the adapters are a direct fit. For 6×9″ speakers, the adapter's inner section will need to be cut or trimmed out a straightforward modification for an experienced installer. Finished in black, these adapters integrate cleanly with the factory door or parcel shelf trim of compatible vehicles. Key Specifications Suits 6.5″ speakers (direct fit) and 6×9″ speakers (with adapter trimming) Inner diameter: 143mm Mounting depth: 35mm Construction: ABS Plastic Finish: Black Sold as a pair (2x adapters) Matches Toyota OEM screw locations Brand: Stinger Australia SKU: BNSPTO691 Features & Benefits OEM screw location match: Designed to align directly with the factory Toyota speaker screw positions, eliminating the need for custom adapter fabrication and reducing installation time 6.5″ direct fit: Accepts standard 6.5″ aftermarket speakers without modification for a clean, plug-and-play style installation 6×9″ compatible with trimming: The adapter's inner section can be cut or trimmed out by an installer to accept 6×9″ speakers, providing upgrade flexibility ABS plastic construction: Durable, lightweight, and resistant to vibration and heat suited to the demands of an automotive door environment 143mm inner diameter / 35mm mounting depth: Dimensionally verified for correct fitment and speaker basket clearance in compatible vehicles Broad multi-brand coverage: Confirmed for Toyota, Holden Colorado, Isuzu D-Max and MU-X, and Lexus RX across multiple production runs Technical Specs Specification Detail SKU BNSPTO691 Brand Stinger Australia Woofer Size 6.5″ (direct), 6×9″ (with trimming) Inner Diameter 143mm Mounting Depth 35mm Construction ABS Plastic Finish Black Quantity Sold as a pair (2x adapters) OEM Screw Location Match Yes Toyota OEM screw pattern Barcode 9342270000801 Compatible Vehicles See full compatibility list below Compatible With Confirmed Vehicle Compatibility: Holden Colorado (including Colorado 7) 2012 to 2013 (RG chassis) Holden Colorado (including Colorado 7) 2014 to 2016 (RG chassis) Isuzu D-Max 2012 to 2016 (RT50–RT85) Isuzu D-Max 2016 to 2019 (RT50–RT85) Isuzu MU-X 2013 to 2015 (RF10) Isuzu MU-X 2016 to 2017 (RF20) Lexus RX 2003 to 2008 (XU30) Toyota Camry 2002 to 2006 (XV30 Series) Toyota Camry 2007 to 2011 (XV40 Series) Toyota FJ Cruiser 2010 to 2016 (GSJ10 Series) Toyota Landcruiser 2008 to 2012 (200 Series) Toyota Landcruiser 2013 to 2015 (200 Series) Toyota Landcruiser 2016 to 2021 (200 Series) Toyota Tundra 2007 to 2013 (XK50 Series) Toyota Tundra 2014 to 2017 (XK50 Series) Frequently Asked Questions Do I need to modify these adapters to fit 6×9″ speakers? Yes for 6×9″ speaker installation, the inner section of the BNSPTO691 adapter needs to be cut or trimmed out. For 6.5″ speakers, the adapters are a direct fit with no modification required. Do these adapters match the Toyota factory screw locations? Yes the BNSPTO691 is designed to match the OEM Toyota speaker screw pattern, eliminating the need to drill new holes or fabricate custom mounting solutions. How many adapters are included in this pack? The BNSPTO691 is sold as a pair two adapters are included per pack, sufficient for a single vehicle door pair installation. Do these adapters suit the Isuzu D-Max and MU-X? Yes confirmed fitment includes the Isuzu D-Max (RT50–RT85, 2012–2019) and MU-X (RF10 2013–2015, RF20 2016–2017) in addition to the Toyota and Holden applications. What is the return policy if these don't fit my vehicle? Return eligibility is subject to the retailer's policy. Always verify your vehicle's chassis code and build year against the full compatibility list before ordering. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Single or Double DIN Stereo Upgrade for Your Audi TT 8J Chassis, 2006–2014. Product Overview The Stinger AFP-05-12 is a vehicle-specific single and double DIN radio fascia kit designed to enable the clean installation of an aftermarket head unit into the Audi TT 8J from 2006 to 2014. Built to follow the exact dash geometry of the second generation TT 8J platform, this fascia delivers a professional, factory-integrated result without cutting, trimming, or improvising around the factory opening. Supporting both single DIN and double DIN head unit formats, the AFP-05-12 gives TT owners flexibility in their stereo choice whether upgrading to a modern single DIN unit or a full touchscreen double DIN multimedia system. Finish and mounting bracket details were not specified by the supplier confirm these with your retailer before purchasing. Key Specifications Suits single DIN and double DIN aftermarket head units Vehicle-specific design for Audi TT 8J (2006–2014) Finish: Not specified by supplier Mounting brackets included: Not specified by supplier Brand: Stinger / Autoleads SKU: AFP0512 / AFP-05-12 Features & Benefits 8J chassis specific: Engineered to match the Audi TT 8J's factory dash opening precisely, delivering a clean result without modification or filler panels Single and double DIN compatible: Flexibility to install either a single DIN or double DIN head unit, giving TT owners a choice of stereo format Second generation TT coverage: Confirmed fitment across the full 2006–2014 Audi TT 8J production run including the Coupe and Roadster body styles Purpose-built for a premium platform: A dedicated fascia solution for the Audi TT 8J, one of Europe's most iconic sports cars No cutting required: Vehicle-specific design means the fascia fits the factory dash opening directly without modification Technical Specs Specification Detail SKU AFP0512 / AFP-05-12 Brand Stinger / Autoleads Compatible Head Unit Formats Single DIN, Double DIN Finish Not specified by supplier Mounting Brackets Included Not specified by supplier Chassis Code 8J Compatible Vehicles Audi TT 8J (2006–2014) Compatible With Confirmed Vehicle Compatibility: Audi TT 2006 to 2014 (8J chassis, includes Coupe and Roadster) Frequently Asked Questions Does this fascia suit the first generation Audi TT (8N) or third generation (8S)? No the AFP-05-12 is confirmed for the second generation Audi TT 8J (2006–2014) only. The first generation 8N and third generation 8S use different dash configurations and are not compatible with this kit. Does this kit suit both the TT Coupe and the TT Roadster? The AFP-05-12 is confirmed for the Audi TT 8J (2006–2014). Both the Coupe and Roadster share the same dash layout on the 8J platform confirm fitment with Stinger Australia if you are unsure before purchasing. Does this kit suit both single DIN and double DIN head units? Yes the AFP-05-12 supports both single DIN and double DIN formats, giving you flexibility in choosing your aftermarket stereo. Are mounting brackets included with this kit? Mounting bracket inclusion was not confirmed by the supplier. Contact your retailer to confirm whether brackets are included or need to be sourced separately before purchasing. What is the return policy if this doesn't fit my vehicle? Return eligibility is subject to the retailer's policy. Always verify your vehicle's chassis code and build year against the compatibility list before ordering. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Tow With Total Confidence Wireless Trailer Camera Kit for Kluger, Estima, Aurion and Tundra Product Overview The Stinger TCTOY2KIT is a wireless trailer camera kit designed for select Toyota vehicles fitted with a 24-pin Toyota camera connector, making it straightforward to reverse when towing a caravan, horse float, or trailer without running video cabling through the rig. The Echomaster PCAM-WLP wireless camera transmits video up to 45 metres (without obstacles) to a receiver installed behind the dashboard, powered directly from the trailer's reverse lights. When the trailer is connected and reverse is engaged, the trailer camera automatically overrides the factory OEM reverse camera. When the trailer is disconnected, the factory camera resumes normal operation. If no factory camera is fitted, an aftermarket reverse camera can be integrated using this kit. The bundle includes the PCAM-WLP wireless camera, PAC PACAVS-21 audio/video switching unit, and the vehicle-specific Toyota 24-pin harness (AXBUCH-T26V). Compatible vehicles are the Toyota Aurion XV40 (2006–2011), Toyota Estima XR30/XR40 (2000–2005), Toyota Estima XR50 (2006–2016), Toyota Kluger XU40 (2007–2013), and Toyota Tundra XK50 (2007–2013). Key Specifications Manufacturer Part Number: TCTOY2KIT Function: Wireless trailer/caravan reverse camera kit Wireless camera: Echomaster PCAM-WLP Wireless range: Up to 45 metres (without obstacles) Wireless frequency: 2.4GHz with digital encryption Camera viewing angle: 140° Camera IP rating: IP67 (water and debris proof) Camera minimum illumination: 0.1 LUX Camera power supply: PWM — safe for CAN-controlled tail lights Camera operating temperature: -20°C to +65°C Vehicle connector: 24-pin Toyota style connector Parking lines: No Factory reverse camera retention: Yes — overridden when trailer connected; resumes when disconnected Aftermarket camera fitment: Supported — if no factory camera fitted Mounting brackets: Included Plug & Play: Factory connector to bare wires — some wiring required Features & Benefits 45-Metre Wireless Range — The PCAM-WLP transmits video wirelessly up to 45 metres, eliminating the need to run cabling through caravans, horse floats, or trailers. 2.4GHz Digital Encrypted Wireless — Digital encryption on the 2.4GHz wireless link provides a stable, secure video signal. IP67 Waterproof Camera — Full IP67 rating makes the wireless camera suitable for trailer mounting in all weather conditions — rain, dust, mud, and debris. PWM Power Supply — CAN Bus Safe — The PCAM-WLP uses a PWM power supply, making it safe for use on Toyota vehicles with CAN-controlled tail light circuits. Factory Camera Retained — Where fitted, the factory OEM reverse camera is retained. The trailer camera automatically takes priority when the trailer is connected and reverts when removed. 140° Wide Viewing Angle — A broad 140° field of view covers the full width of a trailer or caravan when reversing. Vehicle-Specific 24-Pin Harness — The AXBUCH-T26V harness is included, matched to the 24-pin Toyota connector used across the compatible vehicle range. PAC AV Switching Unit — The PACAVS-21 manages automatic input switching between factory and trailer cameras. Technical Specs Specification Detail Part Number TCTOY2KIT Brand Stinger Wireless Camera Echomaster PCAM-WLP Wireless Frequency 2.4GHz, digital encrypted Wireless Range Up to 45 metres (without obstacles) Viewing Angle 140° IP Rating IP67 Minimum Illumination 0.1 LUX Power Supply PWM — CAN bus safe Operating Temperature -20°C to +65°C Vehicle Connector 24-pin Toyota style Parking Lines No Factory Camera Retention Yes — overridden when trailer connected; resumes when removed Aftermarket Camera Support Yes — if no factory camera fitted Mounting Brackets Included AV Switching Unit PAC PACAVS-21 Vehicle Harness AXBUCH-T26V Plug & Play Factory connector to bare wires — some wiring required Compatible With / Goes Well With Toyota Aurion XV40 2006, 2007, 2008, 2009, 2010, 2011 Toyota Estima XR30/XR40 2000, 2001, 2002, 2003, 2004, 2005 Toyota Estima XR50 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Toyota Kluger XU40 2007, 2008, 2009, 2010, 2011, 2012, 2013 Toyota Tundra XK50 2007, 2008, 2009, 2010, 2011, 2012, 2013 Caution: This kit uses the 24-pin Toyota style connector — confirm your vehicle's factory camera connector type before purchase. Note that this 24-pin harness (AXBUCH-T26V) is different from the 24-pin harness in the TCTOY3KIT (AXBUCH-T36V) — confirm the correct kit for your specific model. The kit connects factory connector to bare wires and requires some wiring — it is not fully plug-and-play. Parking guidelines are not provided on the trailer camera image. Frequently Asked Questions Does the trailer camera replace my factory reverse camera permanently? No — the trailer camera overrides the factory camera when the trailer is connected and reverse is engaged. When the trailer is disconnected, the factory OEM reverse camera resumes normal operation automatically. Do I need to run a cable through my caravan or trailer? No — the PCAM-WLP transmits wirelessly up to 45 metres. The camera is powered by the trailer's reverse lights and transmits to a receiver installed behind the dashboard with no video cable routed through the trailer. Is the wireless camera safe for CAN-controlled tail lights? Yes — the PCAM-WLP uses a PWM power supply designed for safe use on vehicles with CAN-controlled tail light circuits. What is the difference between the TCTOY2KIT and TCTOY3KIT? Both kits use a 24-pin Toyota connector but with different harnesses — the TCTOY2KIT uses the AXBUCH-T26V and suits the Aurion XV40, Estima, Kluger XU40, and Tundra XK50. The TCTOY3KIT uses the AXBUCH-T36V and covers newer models including the N80 HiLux, XU50 Kluger, Fortuner, and LandCruiser 200/Prado 150 Series from 2012 onwards. Always confirm the correct kit for your specific vehicle model, year, and chassis code. Will this kit show parking guidelines on the trailer camera image? No — parking lines are not provided on the trailer camera feed. The PCAM-WLP displays a raw camera view without overlay guidelines. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Reverse Any Trailer, Caravan or Float With Ease Wireless Camera Kit for Newer Toyotas With 24-Pin Connector Product Overview The Stinger TCTOY3KIT is a wireless trailer camera kit designed for select Toyota vehicles fitted with a 24-pin Toyota camera connector at the back of the factory radio. It allows effortless reversing when towing a caravan, horse float, or trailer of any size without running video cabling through or along the rig. The Echomaster PCAM-WLP wireless camera transmits video up to 45 metres (without obstacles) to a receiver installed behind the dashboard, powered directly from the trailer's reverse lights. When the trailer is connected and reverse is engaged, the trailer camera automatically overrides the factory OEM reverse camera. When the trailer is disconnected, the factory camera resumes normal operation. Where no factory camera is fitted, an aftermarket reverse camera can be integrated using this kit. The bundle includes the PCAM-WLP wireless camera, PAC PACAVS-21 audio/video switching unit, and the vehicle-specific Toyota 24-pin harness (AXBUCH-T36V). Compatible vehicles include the Aurion, Camry, Corolla Hatch, Corolla Sedan, Fortuner, HiLux, Kluger, LandCruiser 200 Series, LandCruiser Prado 150 Series, and RAV4 spanning 2012 to 2023 across 14 model/chassis combinations. Key Specifications Manufacturer Part Number: TCTOY3KIT Function: Wireless trailer/caravan reverse camera kit Wireless camera: Echomaster PCAM-WLP Wireless range: Up to 45 metres (without obstacles) Wireless frequency: 2.4GHz with digital encryption Camera viewing angle: 140° Camera IP rating: IP67 (water and debris proof) Camera minimum illumination: 0.1 LUX Camera power supply: PWM — safe for CAN-controlled tail lights Camera operating temperature: -20°C to +65°C Vehicle connector: 24-pin Toyota camera connector at back of factory radio Parking lines: No Factory reverse camera retention: Yes — overridden when trailer connected; resumes when disconnected Aftermarket camera fitment: Supported — if no factory camera fitted Mounting brackets: Included Plug & Play: Factory connector to bare wires — some wiring required Features & Benefits 45-Metre Wireless Range — The PCAM-WLP transmits video wirelessly up to 45 metres, eliminating the need to run cabling through caravans, horse floats, or trailers. 2.4GHz Digital Encrypted Wireless — Digital encryption on the 2.4GHz wireless link provides a stable, secure video signal. IP67 Waterproof Camera — Full IP67 rating makes the wireless camera suitable for trailer mounting in all weather conditions — rain, dust, mud, and debris. PWM Power Supply — CAN Bus Safe — The PCAM-WLP uses a PWM power supply, making it safe for use on modern Toyota vehicles with CAN-controlled tail light circuits. Factory Camera Retained — Where fitted, the factory OEM reverse camera is retained. The trailer camera automatically takes priority when the trailer is connected — the factory camera resumes when the trailer is removed. 140° Wide Viewing Angle — A broad 140° field of view covers the full width of a trailer or caravan when reversing. Vehicle-Specific 24-Pin Harness — The AXBUCH-T36V vehicle harness is included, providing a matched connection to the Toyota's factory 24-pin camera connector. PAC AV Switching Unit — The PACAVS-21 manages input switching between factory and trailer cameras automatically. Broad Newer Toyota Coverage — 14 model/chassis combinations covering newer Toyota models from 2012 to 2023, including the N80 HiLux, GX50 Kluger, AN150/160 Fortuner, and LandCruiser 200 Series. Technical Specs Specification Detail Part Number TCTOY3KIT Brand Stinger Wireless Camera Echomaster PCAM-WLP Wireless Frequency 2.4GHz, digital encrypted Wireless Range Up to 45 metres (without obstacles) Viewing Angle 140° IP Rating IP67 Minimum Illumination 0.1 LUX Power Supply PWM — CAN bus safe Operating Temperature -20°C to +65°C Vehicle Connector 24-pin Toyota (at back of factory radio) Parking Lines No Factory Camera Retention Yes — overridden when trailer connected; resumes when removed Aftermarket Camera Support Yes — if no factory camera fitted Mounting Brackets Included AV Switching Unit PAC PACAVS-21 Vehicle Harness AXBUCH-T36V Plug & Play Factory connector to bare wires — some wiring required Compatible With / Goes Well With Toyota Aurion XV50 2015–2017 Toyota Camry XV50 2012–2017 Toyota Corolla Hatch E180 2013–2015 Toyota Corolla Hatch E180/E200 2015–2018 Toyota Corolla Sedan E170 2014–2016 Toyota Corolla Sedan E170 2017–2018 Toyota Fortuner AN150/AN160 2015–2019 Toyota HiLux AN120/AN130 2015–2020 Toyota Kluger XU50 2014–2019 Toyota LandCruiser 200 Series 2013–2015 Toyota LandCruiser 200 Series 2016–2021 Toyota LandCruiser Prado 150 Series 2013–2017 Toyota LandCruiser Prado 150 Series 2017–2023 Toyota RAV4 XA40 2014–2018 Caution: This kit uses the 24-pin Toyota camera connector located at the back of the factory radio — confirm your vehicle has this connector before purchase. The kit connects factory connector to bare wires and requires some wiring — it is not fully plug-and-play. Parking guidelines are not provided on the trailer camera image. Frequently Asked Questions Does the trailer camera replace my factory reverse camera permanently? No — when the trailer is connected and reverse is engaged, the trailer camera overrides the factory camera. When the trailer is disconnected, the factory OEM reverse camera resumes normal operation automatically. Do I need to run a cable through my caravan or trailer? No — the PCAM-WLP transmits wirelessly up to 45 metres. The camera is powered by the trailer's reverse lights and transmits to a receiver installed behind the dashboard with no video cable routed through the trailer. Is the wireless camera safe for vehicles with CAN-controlled tail lights? Yes — the PCAM-WLP uses a PWM power supply specifically designed to be safe for use on vehicles with CAN-controlled tail light circuits, which are common on newer Toyota models. How do I confirm this kit suits my Toyota? This kit requires a 24-pin Toyota camera connector at the back of the factory radio. Confirm your vehicle's factory camera connector type and location before purchase. The compatible model list above includes confirmed chassis codes and year ranges. Will this kit show parking guidelines on the trailer camera image? No — parking lines are not provided on the trailer camera feed. The PCAM-WLP displays a raw camera view without overlay guidelines. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Reverse a Trailer, Caravan or Float With Confidence Wireless Camera Kit Engineered for Select Toyotas Product Overview The Stinger TCTOY4KIT is a wireless trailer camera kit designed specifically for select Toyota vehicles, making it straightforward to reverse when towing a caravan, horse float, or trailer of any size. The kit eliminates the need to run video cabling through or along the trailer the Echomaster PCAM-WLP wireless camera transmits video up to 45 metres (without obstacles) directly to a receiver installed behind the dashboard, keeping the install clean and the camera fully portable between trailers. The wireless camera connects to the trailer's reverse lights for power. When the trailer is connected and reverse is engaged, the trailer camera overrides the factory OEM reverse camera. When the trailer is disconnected, the factory reverse camera resumes normal operation. If no factory camera is fitted, an aftermarket reverse camera can be integrated using this kit. The bundle includes the PCAM-WLP wireless camera, PAC audio/video switching unit (PACAVS-21), and the vehicle-specific Toyota 4-pin harness (SCTYRT4). Compatible vehicles use a 4-pin Toyota camera connector and include the Toyota 86 (pre and post facelift), Estima, HiLux, and LandCruiser Prado (120 and 150 Series without navigation). Key Specifications Manufacturer Part Number: TCTOY4KIT Function: Wireless trailer/caravan reverse camera kit Wireless camera: Echomaster PCAM-WLP Wireless range: Up to 45 metres (without obstacles) Wireless frequency: 2.4GHz with digital encryption Camera viewing angle: 140° Camera IP rating: IP67 (water and debris proof) Camera minimum illumination: 0.1 LUX Camera power supply: PWM — safe for CAN-controlled tail lights Camera operating temperature: -20°C to +65°C Parking lines: No Factory reverse camera retention: Yes — trailer camera overrides factory camera when trailer connected; factory camera resumes when disconnected Aftermarket camera fitment: Supported — if no factory camera fitted Vehicle connector: 4-pin Toyota style Plug & Play: Yes — factory connector to bare wires (some wiring required) Mounting brackets: Included Features & Benefits 45-Metre Wireless Range — The PCAM-WLP transmits video wirelessly up to 45 metres, eliminating the need to run cabling through caravans, horse floats, or trailers — particularly valuable for long rigs where cable runs are impractical. 2.4GHz Digital Encrypted Wireless — Digital encryption on the 2.4GHz wireless link provides a stable, secure video signal without interference from other wireless devices. IP67 Waterproof Camera — Full IP67 rating makes the wireless camera suitable for trailer mounting in all weather conditions — rain, dust, mud, and debris. PWM Power Supply — CAN Bus Safe — The PCAM-WLP uses a PWM power supply, making it safe for use on modern Toyota vehicles with CAN-controlled tail light circuits that are sensitive to conventional accessory load connections. Factory Camera Retained — Where the Toyota is fitted with a factory OEM reverse camera, it is retained by the kit. The trailer camera automatically takes priority when the trailer is connected and reverse is engaged — the factory camera resumes when the trailer is removed. 140° Wide Viewing Angle — A broad 140° field of view covers the full width of a trailer or caravan, reducing blind spots when reversing. Vehicle-Specific 4-Pin Harness — The SCTYRT4 vehicle harness is included, providing a matched connection to the Toyota's factory 4-pin camera connector without additional adaptors. PAC AV Switching Unit — The PACAVS-21 audio/video switching unit manages the input switching between factory camera and trailer camera, enabling automatic override when the trailer is connected. Technical Specs Specification Detail Part Number TCTOY4KIT Brand Stinger Wireless Camera Echomaster PCAM-WLP Wireless Frequency 2.4GHz, digital encrypted Wireless Range Up to 45 metres (without obstacles) Viewing Angle 140° IP Rating IP67 Minimum Illumination 0.1 LUX Power Supply PWM — CAN bus safe Operating Temperature -20°C to +65°C Vehicle Connector 4-pin Toyota style Parking Lines No Factory Camera Retention Yes — overridden when trailer connected; resumes when removed Aftermarket Camera Support Yes — if no factory camera fitted Mounting Brackets Included AV Switching Unit PAC PACAVS-21 Vehicle Harness SCTYRT4 Plug & Play Factory connector to bare wires — some wiring required Compatible With / Goes Well With Toyota 86 2012–2017 (pre-facelift) Toyota 86 2017–2020 (post-facelift) Toyota Estima XR30/XR40 2000–2005 Toyota HiLux AN10/AN20/AN30 2011–2013 Toyota LandCruiser Prado 120 Series 2002–2009 Toyota LandCruiser Prado 150 Series 2009–2013 — without factory navigation only Caution: The LandCruiser Prado 150 Series compatibility is limited to models without factory navigation — navigation-equipped 150 Series Prado models are not supported. The kit connects factory connector to bare wires and requires some wiring — it is not fully plug-and-play. Parking guidelines are not provided on the trailer camera image. Always confirm your vehicle's factory camera connector type (4-pin) before purchase. Frequently Asked Questions Does the trailer camera replace my factory reverse camera permanently? No — when the trailer is connected and reverse is engaged, the trailer camera overrides the factory camera. When the trailer is disconnected, the factory OEM reverse camera resumes normal operation automatically. Do I need to run a cable through my caravan or trailer? No — the PCAM-WLP transmits wirelessly up to 45 metres. The camera is powered by the trailer's reverse lights and transmits to a receiver installed behind the dashboard — no video cable needs to be routed through the trailer. Is the wireless camera safe for vehicles with CAN-controlled tail lights? Yes — the PCAM-WLP uses a PWM power supply specifically designed to be safe for use on vehicles with CAN-controlled tail light circuits, which are sensitive to conventional direct accessory connections common on modern Toyotas. Does the LandCruiser Prado 150 Series require factory navigation to be absent? Yes — the TCTOY4KIT is compatible with the LandCruiser Prado 150 Series (2009–2013) only in models without factory navigation. Navigation-equipped 150 Series Prado models are not supported by this kit. Will this kit show parking guidelines on the trailer camera image? No — parking lines are not provided on the trailer camera feed. The PCAM-WLP displays a raw camera view without overlay guidelines. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

One HEIGH10 Kit, Dozens of Toyotas CarPlay, SWC and Reverse Camera Retention Across 22 Models Product Overview The Stinger SRP-TY011H is an all-inclusive infotainment replacement kit designed to fit a wide range of Toyota vehicles from 2000 to 2019. This kit combines the Stinger HEIGH10 10" infotainment system with the hardware needed to retain factory steering wheel audio controls and factory reverse cameras (where applicable), covering 22 Toyota model/chassis combinations spanning the Corolla, Echo, Estima, FJ Cruiser, HiAce, HiLux, Kluger, LandCruiser, LandCruiser Prado, MR2, Prius C, RAV4, Rukus, Tarago, and Yaris. The bundle includes the HEIGH10 (UN1810), BKTTR998 radio mounting kit, SWI-TY01 vehicle interface with harness, two camera retention harnesses (SCTYRT4 for 4-pin connector vehicles and AXBUCH-T16V for 16-pin connector vehicles), and a CPH-STI01 ISO harness. iGo navigation is optional and not included in the standard kit. Reverse camera retention applies only to vehicles where the camera signal runs through the factory OEM infotainment system via a 4-pin or 16-pin connector cameras displayed in the rear view mirror or on an external display separate to the factory radio are not retained. Key Specifications Manufacturer Part Number: SRP-TY011H Included head unit: Stinger HEIGH10 UN1810 (10" display) Vehicle compatibility: Select Toyota models 2000–2019 — see full compatibility list Screen size: 10" HD capacitive touchscreen Colour depth: 16.7 million colours Apple CarPlay: Yes Android Auto: Yes AM/FM radio: Yes — with RDS tuner Dual USB: Yes HDMI input: Yes RCA output: 4V, 6-channel Digital Sound Processor: Yes — with TOSLINK output Bluetooth: Yes — handsfree and audio playback with aptX iGo navigation: Optional — not included in standard kit Steering wheel audio control retention: Yes — via SWI-TY01 Reverse camera retention: Yes — 4-pin and 16-pin OEM infotainment connector vehicles only Camera exclusion: Mirror-integrated and external-display cameras not retained Plug & Play: Yes Features & Benefits 10" HD Capacitive Touchscreen — The HEIGH10's 10" display with 16.7 million colours brings modern infotainment to a broad range of Toyota models spanning two decades of production. Apple CarPlay & Android Auto — Certified CarPlay and Android Auto with full access to navigation, music, calls, and messaging from a connected smartphone on the 10" screen. Steering Wheel Audio Control Retention — Factory steering wheel audio buttons are retained via the SWI-TY01 vehicle interface across all compatible Toyota models. Dual Camera Retention Harnesses — Two camera harnesses are included — the SCTYRT4 (4-pin) and AXBUCH-T16V (16-pin) — covering both connector types used across the compatible Toyota range. Camera retention applies where the factory camera signal runs through the OEM infotainment system. 4V 6-Channel RCA Output + DSP — The HEIGH10's output stage and TOSLINK optical output provide the foundation for connecting external amplifiers and audio processors. Broad Toyota Compatibility — 22 model/chassis combinations across the Corolla, Echo, Estima, FJ Cruiser, HiAce, HiLux, Kluger, LandCruiser (100/120/200 Series), LandCruiser Prado, MR2, Prius C, RAV4, Rukus, Tarago, and Yaris. Technical Specs Specification Detail Part Number SRP-TY011H Included Head Unit Stinger HEIGH10 UN1810 Brand Stinger Screen Size 10" HD capacitive touchscreen Colour Depth 16.7 million colours Apple CarPlay Yes Android Auto Yes AM/FM Radio Yes — RDS tuner Dual USB Yes HDMI Input Yes RCA Output 4V, 6-channel Digital Sound Processor Yes — TOSLINK output Bluetooth Yes — handsfree + audio, aptX iGo Navigation Optional — not included SWC Retention Yes — via SWI-TY01 Reverse Camera Retention Yes — 4-pin and 16-pin OEM infotainment connector only Camera Exclusion Mirror-integrated and external-display cameras not retained Camera Harnesses Included SCTYRT4 (4-pin) and AXBUCH-T16V (16-pin) Plug & Play Yes Included Components HEIGH10 UN1810, BKTTR998 mounting kit, SWI-TY01 interface, SCTYRT4 camera harness, AXBUCH-T16V camera harness, CPH-STI01 ISO harness Compatible With / Goes Well With Toyota Corolla E140/E160 2003–2009 Toyota Corolla E120 2009–2012 Toyota Echo XP10 2000–2004 Toyota Estima XR30/XR40 2000–2005 Toyota FJ Cruiser GSJ10 2010–2016 Toyota HiAce H200 2005–2019 Toyota HiLux AN10/AN20/AN30 2005–2010 Toyota HiLux AN10/AN20/AN30 2011–2013 Toyota Kluger XU20 2003–2006 Toyota Kluger XU40 2007–2013 Toyota LandCruiser 100 Series 2001–2008 Toyota LandCruiser 120 Series 2002–2009 Toyota LandCruiser 200 Series 2008–2012 Toyota LandCruiser Prado 120 Series 2002–2009 Toyota MR2 W30 2000–2005 Toyota Prius C XP130 2012–2018 Toyota RAV4 XA20 2001–2005 Toyota RAV4 XA40 2012–2013 Toyota Rukus E150 2010–2014 Toyota Tarago XR50 2005–2017 Toyota Yaris XP90 2005–2011 Toyota Yaris XP90 2012–2014 Caution: Reverse camera retention applies only to vehicles where the factory camera signal is displayed through the OEM infotainment system via a 4-pin or 16-pin connector. Cameras displayed in the rear view mirror or via an external display separate to the factory radio are not retained by this kit. Confirm your vehicle's camera connector type before purchase if reverse camera retention is required. iGo navigation is optional and not included in the standard kit. A compatibility verification is recommended for your specific model, year, and variant before purchase — particularly for LandCruiser and Kluger models where multiple trim levels exist within a given year range. Frequently Asked Questions Does the SRP-TY011H include the HEIGH10 head unit? Yes — the Stinger HEIGH10 infotainment system (UN1810) is included along with all vehicle-specific installation hardware. iGo navigation is optional and not included in the standard kit. Will my factory reverse camera be retained? Only if the factory camera signal runs through the OEM infotainment system via a 4-pin or 16-pin connector. Two camera harnesses are included in the kit (SCTYRT4 for 4-pin, AXBUCH-T16V for 16-pin). If your camera is displayed in the rear view mirror or through an external display separate to the factory radio, it cannot be retained with this kit. How do I confirm which camera harness applies to my vehicle? The SCTYRT4 suits vehicles with a 4-pin camera connector at the OEM infotainment system. The AXBUCH-T16V suits vehicles with a 16-pin connector. Both are included in the kit — identify your vehicle's factory camera connector type before installation. If unsure, confirm with the supplier before purchase. Is this kit compatible with my specific Toyota variant? The SRP-TY011H covers 22 Toyota model and chassis combinations from 2000 to 2019. Refer to the full compatibility list above for confirmed models, years, and chassis codes. For LandCruiser, Kluger, and HiLux variants where multiple trim levels exist within a year range, confirm your specific configuration before purchase. Is iGo navigation included? No — iGo navigation is optional and not included in the standard SRP-TY011H kit. Contact the supplier to confirm availability and pricing if onboard navigation is required. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Complete Navara DX & RX Upgrade HEIGH10 10" With CarPlay, SWC and USB Retention Product Overview The Stinger SRP-NI003H is an all-inclusive infotainment replacement kit designed for the 2015–2019 Nissan Navara D23 NP300 in DX and RX grades. This kit combines the Stinger HEIGH10 10" infotainment system with all vehicle-specific hardware to retain factory steering wheel audio controls, factory USB socket, and the factory antenna delivering a complete, plug-and-play upgrade. The bundle includes the HEIGH10 (UN1810), BKNDK780 radio mounting kit, SWI-NI01 vehicle interface with harness, ST27AA36 antenna adaptor, CPH-STI01 ISO harness, and AXUSBM-B USB retention harness. iGo navigation is optional and is not included in the standard kit. Please note: this kit is compatible with DX and RX grades only it is not compatible with ST, ST-X, or ST-L models. The Stinger HEIGH10 head unit is included. Key Specifications Manufacturer Part Number: SRP-NI003H Included head unit: Stinger HEIGH10 UN1810 (10" display) Vehicle compatibility: Nissan Navara D23 NP300 2015–2019 — DX and RX grades only Not compatible with: ST, ST-X, ST-L models Screen size: 10" HD capacitive touchscreen Colour depth: 16.7 million colours Apple CarPlay: Yes Android Auto: Yes AM/FM radio: Yes — with RDS tuner Dual USB: Yes HDMI input: Yes RCA output: 4V, 6-channel Digital Sound Processor: Yes — with TOSLINK output Bluetooth: Yes — handsfree and audio playback with aptX iGo navigation: Optional — not included in standard kit Steering wheel audio control retention: Yes — via SWI-NI01 Factory USB socket retention: Yes — via AXUSBM-B Factory antenna retention: Yes — via ST27AA36 Reverse camera retention: Not included Plug & Play: Yes Features & Benefits 10" HD Capacitive Touchscreen — The HEIGH10's 10" display with 16.7 million colours brings a modern infotainment interface to the Navara DX and RX's factory centre stack. Apple CarPlay & Android Auto — Certified CarPlay and Android Auto with full access to navigation, music, calls, and messaging from a connected smartphone on the 10" screen. Steering Wheel Audio Control Retention — Factory steering wheel audio buttons are retained via the SWI-NI01 vehicle interface, keeping hands-free audio control functional after installation. Factory USB Socket Retention — The AXUSBM-B harness retains the factory USB socket, keeping the factory USB location accessible and functional with the new head unit. Factory Antenna Retention — The ST27AA36 antenna adaptor retains the factory antenna connection, maintaining FM/AM reception. 4V 6-Channel RCA Output + DSP — The HEIGH10's output stage and TOSLINK optical output provide the foundation for connecting external amplifiers and audio processors. Complete Hardware Bundle — Radio mounting kit (BKNDK780), vehicle interface (SWI-NI01), antenna adaptor (ST27AA36), ISO harness (CPH-STI01), and USB retention harness (AXUSBM-B) are all included and matched to the DX/RX Navara. Technical Specs Specification Detail Part Number SRP-NI003H Included Head Unit Stinger HEIGH10 UN1810 Brand Stinger Screen Size 10" HD capacitive touchscreen Colour Depth 16.7 million colours Apple CarPlay Yes Android Auto Yes AM/FM Radio Yes — RDS tuner Dual USB Yes HDMI Input Yes RCA Output 4V, 6-channel Digital Sound Processor Yes — TOSLINK output Bluetooth Yes — handsfree + audio, aptX iGo Navigation Optional — not included SWC Retention Yes — via SWI-NI01 Factory USB Retention Yes — via AXUSBM-B Factory Antenna Retention Yes — via ST27AA36 Reverse Camera Retention Not included Grade Compatibility DX and RX only — not ST / ST-X / ST-L Plug & Play Yes Included Components HEIGH10 UN1810, BKNDK780 mounting kit, SWI-NI01 interface, ST27AA36 antenna adaptor, CPH-STI01 ISO harness, AXUSBM-B USB harness Compatible With / Goes Well With Nissan Navara D23 NP300 DX 2015, 2016, 2017, 2018, 2019 Nissan Navara D23 NP300 RX 2015, 2016, 2017, 2018, 2019 External amplifiers and processors via 4V 6-channel RCA output TOSLINK-compatible digital audio processors Caution: This kit is compatible with DX and RX grades only — it is not compatible with ST, ST-X, or ST-L Navara models. Reverse camera retention is not included with this kit. iGo navigation is optional and not included in the standard kit. Confirm your Navara's grade before purchase. Frequently Asked Questions Does the SRP-NI003H include the HEIGH10 head unit? Yes — the Stinger HEIGH10 infotainment system (UN1810) is included along with all vehicle-specific installation hardware. iGo navigation is optional and not included in the standard kit. Which Navara grades is this kit compatible with? The SRP-NI003H is compatible with the Nissan Navara D23 NP300 DX and RX grades from 2015 to 2019 only. It is not compatible with ST, ST-X, or ST-L models — those grades require a different kit. Does this kit include reverse camera retention? No — reverse camera retention is not included with the SRP-NI003H. DX and RX Navara variants in this range do not typically come with a factory reverse camera, but if one is fitted or required, an additional camera integration product will be needed. Will my factory steering wheel controls and USB socket be retained? Yes to both. The SWI-NI01 vehicle interface retains factory steering wheel audio buttons, and the AXUSBM-B harness retains the factory USB socket location. Is iGo navigation included? No — iGo navigation is optional and not included in the standard SRP-NI003H kit. Contact the supplier to confirm availability and pricing if onboard navigation is required. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less