Modernise Your Wrangler TJ HEIGH10 10" With CarPlay, 4-Camera Inputs and Trail-Ready Features Product Overview The Stinger SRP-JW03H is an all-inclusive infotainment replacement kit designed for the 2003–2006 Jeep Wrangler TJ. This kit combines the Stinger HEIGH10 10" infotainment system with all vehicle-specific hardware dash panel, antenna adaptor, two era-specific Jeep radio harnesses, and dual USB accessory harness providing everything needed to install a modern infotainment system into the Wrangler TJ's dated factory dash. The HEIGH10 delivers Apple CarPlay, Android Auto, a 4 x 50W built-in amplifier, 4V 6-channel RCA output, TOSLINK optical output, 15-band EQ with three presets per source, dual USB, HDMI input, four camera inputs with 12V wired triggers, rear seat entertainment output, and Bluetooth 4.2 with aptX. The screen mount is adjustable, allowing fine-tuning of the display position to suit the application. iGo offline navigation is not included and is available separately. The Stinger HEIGH10 head unit is included. Key Specifications Manufacturer Part Number: SRP-JW03H Included head unit: Stinger HEIGH10 (10" display, 1024 x 600) Vehicle compatibility: Jeep Wrangler TJ 2003–2006 Factory connector type: 22-pin Chrysler style connector (to bare wires) Screen size: 10" HD capacitive touchscreen Resolution: 1024 x 600 Colour depth: 16.7 million colours Apple CarPlay: Yes Android Auto: Yes AM/FM radio: Yes — PTY/RT RDS support Built-in amplifier: 4 x 50W peak RCA output: 4V, 6-channel (front/rear/subwoofer) TOSLINK output: Yes — variable optical audio Equaliser: 15-band adjustable, 3 presets per source Bluetooth: 4.2 — handsfree + A2DP with aptX Dual USB: Yes — 1.5A output HDMI input: 1x AV RCA input: 1x Camera inputs: 4x RCA with 12V wired triggers Rear camera mic input: Yes Rear seat entertainment: 2x video output, 1x audio output Adjustable screen mount: Yes SWC: Hardwired remote control ready (no SWC interface included) iGo navigation: Not included — available separately Plug & Play: No — wiring required (factory to bare wires) Smartphone: Not included Features & Benefits 10" HD Capacitive Touchscreen with Adjustable Mount — 1024 x 600 resolution with 16.7 million colours, and an adjustable mounting bracket to fine-tune screen position within the TJ's dash opening. Apple CarPlay & Android Auto — Certified CarPlay and Android Auto with full access to navigation, music, calls, and messaging from a connected smartphone on the 10" screen. 4-Camera Input System — Four independent RCA camera inputs with dedicated 12V wired triggers allow front, rear, and side cameras to be connected simultaneously with touchscreen switching between views — well-suited for trail cameras and off-road setups. 4 x 50W Built-In Amplifier with 15-Band EQ — High-power built-in amplification with 15-band adjustable EQ and three presets per source, plus a 4V 6-channel RCA output for external amplifiers and TOSLINK for digital audio processors. Rear Seat Entertainment Output — Two video and one audio output support connection of a rear seat entertainment screen. Dual USB Flush Mount Harness — The included dual USB accessory/cig lighter replacement harness provides clean USB access for smartphone connectivity and media playback. Two Era-Specific Jeep Harnesses — Both 1999–2001 and 2002–2005 Jeep radio harnesses are included, covering variation in WJ/TJ factory wiring without needing to source the correct harness separately. Trail Camera Ready — The four camera inputs with external trigger support make this kit well-suited for Wrangler owners running trail cameras, bull bar cameras, or recovery-focused camera setups. The Echomaster PCAM-201-N and PCAM-10FF-N cameras are recommended options available separately. Technical Specs Specification Detail Part Number SRP-JW03H Included Head Unit Stinger HEIGH10 10" Brand Stinger Screen Resolution 1024 x 600 Colour Depth 16.7 million colours Apple CarPlay Yes Android Auto Yes AM/FM Radio Yes — PTY/RT RDS Built-In Amplifier 4 x 50W peak RCA Output 4V, 6-channel (front/rear/sub) TOSLINK Output Yes — variable Equaliser 15-band, 3 presets per source Bluetooth 4.2 — handsfree + A2DP, aptX USB 2x — 1.5A output HDMI Input 1x AV RCA Input 1x Camera Inputs 4x RCA with 12V wired triggers Rear Camera Mic Input Yes RSE Output 2x video, 1x audio Adjustable Screen Mount Yes Factory Connector 22-pin Chrysler style (to bare wires) SWC Hardwired remote control ready (no interface included) iGo Navigation Not included — available separately Plug & Play No — wiring required Included Components HEIGH10, dash panel, antenna adaptor, '02–'05 Jeep harness, '99–'01 Jeep harness, dual USB accessory harness, installation instructions Compatible With / Goes Well With Jeep Wrangler TJ 2003, 2004, 2005, 2006 External amplifiers and processors via 4V 6-channel RCA output TOSLINK-compatible digital audio processors Up to 4x RCA cameras via independent triggered inputs Echomaster PCAM-201-N universal flush mount reverse camera (sold separately) Echomaster PCAM-10FF-N off-road camera (sold separately) Caution: Wiring is required — this is not a plug-and-play kit. The factory connector terminates in bare wires and installation requires automotive wiring experience. Vehicle installation instructions are included; professional installation is recommended. No SWC retention interface is included — the HEIGH10 is hardwired remote control ready but a SWC interface must be sourced separately if SWC retention is required. iGo offline navigation is not included and must be purchased separately. A compatible smartphone must be supplied by the user. Frequently Asked Questions Does the SRP-JW03H include the HEIGH10 head unit? Yes — the Stinger HEIGH10 infotainment system is included along with all vehicle-specific installation hardware. iGo navigation is not included and is available separately. Is this kit plug-and-play? No — some wiring is required. The factory connector terminates in bare wires and the kit is not fully plug-and-play. Vehicle installation instructions are included; professional installation is recommended. Does the kit include a steering wheel control interface? No — a dedicated SWC retention interface is not included in the SRP-JW03H. The HEIGH10 is hardwired remote control ready, but a compatible SWC interface will need to be sourced separately if OEM steering wheel control retention is required. Why are two radio harnesses included? The Jeep TJ's factory wiring varied between the 1999–2001 and 2002–2005 model years. Both harnesses are included in the kit, covering the relevant wiring variants without needing to source the correct harness separately. Does this kit support a reverse camera? The HEIGH10 supports up to four RCA camera inputs with 12V wired triggers. No factory camera is retained (the TJ did not have a factory reverse camera). The Echomaster PCAM-201-N universal flush mount reverse camera or the Echomaster PCAM-10FF-N off-road camera are recommended options available separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Modernise Your Grand Cherokee WJ HEIGH10 10" With CarPlay, Factory Amp Retention and 4-Camera Inputs Product Overview The Stinger SRP-JG99H is an all-inclusive infotainment replacement kit designed for the 1999–2004 Jeep Grand Cherokee WJ/WG. This kit combines the Stinger HEIGH10 10" infotainment system with all vehicle-specific hardware to retain the factory amplified audio system (where fitted) and OEM steering wheel controls (where fitted) making it compatible with both amplified and non-amplified WJ variants. The bundle includes two era-specific Jeep radio harnesses (1999–2001 and 2002–2005), a vehicle-specific dash panel, antenna adaptor, PAC SWI-RC-1 steering retention interface, dual USB accessory socket harness, HEIGH10 1-DIN adaptor kit, and vehicle installation instructions. The HEIGH10 unit provides Apple CarPlay, Android Auto, a 4 x 50W built-in amplifier, 4V 6-channel RCA output, TOSLINK optical output, 15-band EQ, four camera inputs with wired triggers, rear seat entertainment output, and Bluetooth 4.2 with aptX. Please note: wiring is required this kit is not plug-and-play. The connection from factory to head unit terminates in bare wires. iGo offline mapping is not included and is available separately. A smartphone is not included and must be supplied by the user. Key Specifications Manufacturer Part Number: SRP-JG99H Included head unit: Stinger HEIGH10 (10" display, 1024 x 600) Vehicle compatibility: Jeep Grand Cherokee WJ/WG 1999–2004 Factory connector type: 22-pin Chrysler style connector (to bare wires) Screen size: 10" HD capacitive touchscreen Resolution: 1024 x 600 Colour depth: 16.7 million colours Apple CarPlay: Yes Android Auto: Yes AM/FM radio: Yes — PTY/RT RDS support Built-in amplifier: 4 x 50W peak RCA output: 4V, 6-channel (front/rear/subwoofer) TOSLINK output: Yes — variable optical audio Equaliser: 15-band adjustable, 3 presets per source Bluetooth: 4.2 — handsfree + A2DP with aptX Dual USB: Yes — 1.5A output HDMI input: 1x AV RCA input: 1x Camera inputs: 4x RCA with 12V wired triggers Rear camera mic input: Yes Rear seat entertainment: 2x video output, 1x audio output Factory amplifier retention: Yes — amplified and non-amplified models compatible SWC retention: Yes — via PAC SWI-RC-1 (if factory fitted) iGo navigation: Not included — available separately Plug & Play: No — wiring required (factory to bare wires) Smartphone: Not included Features & Benefits 10" HD Capacitive Touchscreen — 1024 x 600 resolution with 16.7 million colours brings a modern, sharp infotainment interface to the WJ's aged factory dash. Apple CarPlay & Android Auto — Certified CarPlay and Android Auto with full access to navigation, music, calls, and messaging from a connected smartphone on the 10" screen. Factory Amplifier Retention — Compatible with both factory-amplified and non-amplified WJ variants. The factory amplified audio system is retained on equipped models, preserving speaker output quality after the head unit swap. PAC SWI-RC-1 Steering Wheel Control Interface — The PAC SWI-RC-1 is a dedicated SWC retention interface included in the kit, retaining OEM steering wheel audio buttons on WJ models where they are factory fitted. Two Era-Specific Radio Harnesses — Separate vehicle-specific harnesses for 1999–2001 and 2002–2005 Jeep models are both included, covering variation in factory wiring across the WJ production run. 4-Camera Input System — Four independent RCA camera inputs with dedicated 12V wired triggers allow connection of front, rear, and side cameras with touchscreen switching. 4 x 50W Built-In Amplifier with 15-Band EQ — High-power built-in amplification with 15-band adjustable EQ and three presets per source, plus a 4V 6-channel RCA output for external amplifiers and TOSLINK for digital processors. Rear Seat Entertainment Output — Two video and one audio output support connection of a rear seat entertainment screen. Dual USB Flush Mount Accessory Socket — A dual USB accessory/cig lighter replacement harness is included, providing clean USB access for smartphone connectivity and media playback. Technical Specs Specification Detail Part Number SRP-JG99H Included Head Unit Stinger HEIGH10 10" Brand Stinger Screen Resolution 1024 x 600 Colour Depth 16.7 million colours Apple CarPlay Yes Android Auto Yes AM/FM Radio Yes — PTY/RT RDS Built-In Amplifier 4 x 50W peak RCA Output 4V, 6-channel (front/rear/sub) TOSLINK Output Yes — variable Equaliser 15-band, 3 presets per source Bluetooth 4.2 — handsfree + A2DP, aptX USB 2x — 1.5A output HDMI Input 1x AV RCA Input 1x Camera Inputs 4x RCA with 12V wired triggers Rear Camera Mic Input Yes RSE Output 2x video, 1x audio Factory Connector 22-pin Chrysler style (to bare wires) Factory Amplifier Retention Yes — amplified and non-amplified compatible SWC Retention Yes — via PAC SWI-RC-1, if factory fitted iGo Navigation Not included — available separately Plug & Play No — wiring required Included Components HEIGH10, dash panel, antenna adaptor, PAC SWI-RC-1, '99–'01 Jeep harness, '02–'05 Jeep harness, dual USB accessory harness, 1-DIN adaptor kit, installation instructions Compatible With / Goes Well With Jeep Grand Cherokee WJ/WG 1999, 2000, 2001, 2002, 2003, 2004 Factory amplified and non-amplified audio variants External amplifiers and processors via 4V 6-channel RCA output TOSLINK-compatible digital audio processors Up to 4x RCA cameras via independent triggered inputs Echomaster PCAM-201-N universal flush mount reverse camera (sold separately) Echomaster PCAM-10FF-N off-road camera (sold separately) Caution: Wiring is required — this is not a plug-and-play kit. The factory connector terminates in bare wires and installation requires automotive wiring experience. Vehicle installation instructions are included; professional installation is recommended. iGo offline navigation is not included and must be purchased separately. A compatible smartphone must be supplied by the user. Frequently Asked Questions Does the SRP-JG99H include the HEIGH10 head unit? Yes — the Stinger HEIGH10 infotainment system is included along with all vehicle-specific hardware. iGo navigation is not included and is available separately. Is this kit plug-and-play? No — wiring is required. The factory connector terminates in bare wires and the kit is not plug-and-play. Vehicle installation instructions are included, and professional installation is strongly recommended. Will my factory amplified audio system be retained? Yes — the SRP-JG99H is compatible with both factory-amplified and non-amplified Grand Cherokee WJ models, and the factory amplifier is retained on equipped vehicles. Why are two radio harnesses included? The WJ Grand Cherokee's factory wiring changed between the 1999–2001 and 2002–2005 model years. Both harnesses are included in the kit, covering the full WJ production run without needing to source the correct harness separately. Does this kit support a reverse camera? The HEIGH10 supports up to four RCA camera inputs with 12V wired triggers. A factory reverse camera can be connected if fitted. For WJ models without a factory camera, the Echomaster PCAM-201-N universal flush mount reverse camera or the Echomaster PCAM-10FF-N off-road camera are recommended and available separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Complete Navara Upgrade HEIGH10 10" Infotainment With CarPlay, iGo Navigation, SWC and Camera Retention Product Overview The Stinger SRP-NI002H is an all-inclusive infotainment replacement kit designed for 2015–2019 Nissan Navara D23 (NP300) ST, ST-X, and ST-L models. This kit combines the Stinger HEIGH10 10" infotainment system with all vehicle-specific hardware to retain factory steering wheel audio controls, factory USB socket, factory reverse camera (where fitted), and the factory antenna delivering a complete, plug-and-play upgrade without sourcing individual components. The bundle includes the HEIGH10 (UN1810), BN25K7351 radio mounting kit, PACRP4NI11 vehicle interface with harness, ST27AA36 antenna adaptor, AXUSBM-B USB retention harness, and an iGo navigation card with Australian and New Zealand maps. Please note: this kit is compatible with ST, ST-X, and ST-L grades only. The 360-degree camera system is not retained. The MFD clock display in the dash cluster is not retained. The Stinger HEIGH10 head unit is included. Key Specifications Manufacturer Part Number: SRP-NI002H Included head unit: Stinger HEIGH10 UN1810 (10" display) Vehicle compatibility: Nissan Navara D23 NP300 2015–2019 — ST, ST-X, ST-L grades only Screen size: 10" HD capacitive touchscreen Colour depth: 16.7 million colours Apple CarPlay: Yes Android Auto: Yes AM/FM radio: Yes — with RDS tuner Dual USB: Yes HDMI input: Yes RCA output: 4V, 6-channel Digital Sound Processor: Yes — with TOSLINK output Bluetooth: Yes — handsfree and audio playback with aptX iGo navigation: Yes — included (navigation card, AU/NZ maps) Steering wheel audio control retention: Yes Factory USB socket retention: Yes Factory reverse camera retention: Yes — if fitted (standard reverse camera only) Factory antenna retention: Yes 360-degree camera retention: No MFD clock display retention: No Plug & Play: Yes Features & Benefits 10" HD Capacitive Touchscreen — The HEIGH10's 10" display with 16.7 million colours upgrades the Navara's factory centre stack to a modern infotainment interface with a clean, professional result. Apple CarPlay & Android Auto — Certified CarPlay and Android Auto with full access to navigation, music, calls, and messaging from a connected smartphone on the 10" screen. iGo Offline Navigation Included — The included iGo navigation card provides Australian and New Zealand offline mapping — no mobile reception required. Maps are updatable via a naviextras.com account. Steering Wheel Audio Control Retention — Factory steering wheel audio buttons are retained via the PACRP4NI11 vehicle interface, keeping hands-free audio control functional after installation. Factory USB Socket Retention — The factory USB socket is retained via the AXUSBM-B harness, keeping the factory USB location accessible and functional with the new head unit. Factory Reverse Camera Retention — The factory reverse camera is retained on Navara models where it is fitted. Note: the 360-degree camera system is not supported. Factory Antenna Retention — The ST27AA36 antenna adaptor retains the factory antenna connection, maintaining FM/AM reception. 4V 6-Channel RCA Output + DSP — The HEIGH10's output stage and TOSLINK optical output provide a strong foundation for connecting external amplifiers and audio processors. Technical Specs Specification Detail Part Number SRP-NI002H Included Head Unit Stinger HEIGH10 UN1810 Brand Stinger Screen Size 10" HD capacitive touchscreen Colour Depth 16.7 million colours Apple CarPlay Yes Android Auto Yes AM/FM Radio Yes — RDS tuner Dual USB Yes HDMI Input Yes RCA Output 4V, 6-channel Digital Sound Processor Yes — TOSLINK output Bluetooth Yes — handsfree + audio, aptX iGo Navigation Yes — included (AU/NZ maps) SWC Retention Yes Factory USB Retention Yes Reverse Camera Retention Yes — standard reverse camera only 360-Degree Camera Not retained Factory Antenna Retained via ST27AA36 MFD Clock Display Not retained Plug & Play Yes Grade Compatibility ST, ST-X, ST-L only Included Components HEIGH10 UN1810, BN25K7351 mounting kit, PACRP4NI11 interface, ST27AA36 antenna adaptor, AXUSBM-B USB harness, iGo navigation card Compatible With / Goes Well With Nissan Navara D23 NP300 ST 2015, 2016, 2017, 2018, 2019 Nissan Navara D23 NP300 ST-X 2015, 2016, 2017, 2018, 2019 Nissan Navara D23 NP300 ST-L 2015, 2016, 2017, 2018, 2019 External amplifiers and processors via 4V 6-channel RCA output TOSLINK-compatible digital audio processors naviextras.com for iGo map updates Caution: This kit is compatible with ST, ST-X, and ST-L grades only it is not confirmed for other Navara variants in this range. The 360-degree camera system is not retained. The MFD clock display in the dash cluster is not retained after installation. Confirm your Navara's grade before purchase. Frequently Asked Questions Does the SRP-NI002H include the HEIGH10 head unit and iGo navigation? Yes — the Stinger HEIGH10 infotainment system (UN1810) and an iGo navigation card with Australian and New Zealand maps are both included. Maps can be updated at any time via a naviextras.com account. Which Navara grades is this kit compatible with? The SRP-NI002H is compatible with the Nissan Navara D23 NP300 in ST, ST-X, and ST-L grades from 2015 to 2019. It is not confirmed for other Navara grades or configurations. Will the factory reverse camera be retained? Yes — the standard factory reverse camera is retained where fitted. The 360-degree camera system is not supported by this kit and will not be retained. Will the MFD clock display in the dash cluster still work? No — control of the clock in the dash cluster MFD is not retained by this kit. This is a known limitation flagged by Stinger. Will my factory USB socket still be accessible? Yes — the AXUSBM-B USB retention harness retains the factory USB socket, keeping it functional and accessible after the HEIGH10 is installed. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Complete Jimny Upgrade HEIGH10 10" Infotainment With CarPlay, SWC and Camera Retention Product Overview The Stinger SRP-SZ001H is an all-inclusive infotainment replacement kit designed for 2018–2023 Suzuki Jimny vehicles. This kit combines the Stinger HEIGH10 10" infotainment system with all the vehicle-specific hardware needed to retain factory steering wheel audio controls (where fitted) and the factory reverse camera (in select models), delivering a complete, plug-and-play upgrade without sourcing individual parts. The bundle includes the HEIGH10 unit, radio mounting kit, vehicle interface with harness, reverse camera retention harness, a dual USB flush mount kit, and an ISO harness everything needed for a professional installation result. Please note: for Jimny vehicles fitted with the trapezoid OEM radio from 2021–2022, the reverse camera cannot be retained using the included harness. The Stinger HEIGH10 head unit is included. Key Specifications Manufacturer Part Number: SRP-SZ001H Included head unit: Stinger HEIGH10 UN1810 (10" display) Screen size: 10" HD capacitive touchscreen Colour depth: 16.7 million colours Apple CarPlay: Yes Android Auto: Yes AM/FM radio: Yes — with RDS tuner Dual USB: Yes HDMI input: Yes RCA output: 4V, 6-channel Digital Sound Processor: Yes — with TOSLINK output Bluetooth: Yes — handsfree and audio playback with aptX iGo navigation: Optional (not confirmed as included — see red-flags) Steering wheel control retention: Yes — if factory fitted Reverse camera retention: Yes — select models only Reverse camera retention exclusion: Jimny with trapezoid OEM radio 2021–2022 — not retained with included harness Dual USB flush mount kit: Included Plug & Play: Yes Features & Benefits 10" HD Capacitive Touchscreen — The HEIGH10's 10" display with 16.7 million colour rendering upgrades the Jimny's compact centre stack to a modern, feature-rich infotainment interface. Apple CarPlay & Android Auto — Wired CarPlay and Android Auto bring navigation, music, calls, and messaging to the 10" screen from a connected smartphone. Steering Wheel Control Retention — Factory steering wheel audio buttons are retained via the included vehicle interface on Jimny models fitted with this feature. Reverse Camera Retention — The included reverse camera retention harness retains the factory reverse camera on select Jimny models. Note: Jimny vehicles fitted with the trapezoid OEM radio from 2021–2022 cannot retain the reverse camera using the included harness. Dual USB Flush Mount Kit — A dual USB flush mount kit is included, allowing factory-style USB access points to be integrated into the new installation. 4V 6-Channel RCA Output + DSP — The HEIGH10's output stage and built-in DSP with TOSLINK provides the foundation for connecting external amplifiers and audio processors. Complete Hardware Bundle — Radio mounting kit, vehicle interface with harness, reverse camera retention harness, dual USB flush mount kit, and ISO harness are all included. Technical Specs Specification Detail Part Number SRP-SZ001H Included Head Unit Stinger HEIGH10 UN1810 Brand Stinger Screen Size 10" HD capacitive touchscreen Colour Depth 16.7 million colours Apple CarPlay Yes Android Auto Yes AM/FM Radio Yes — RDS tuner Dual USB Yes HDMI Input Yes RCA Output 4V, 6-channel Digital Sound Processor Yes — TOSLINK output Bluetooth Yes — handsfree + audio, aptX iGo Navigation See note — confirm with supplier SWC Retention Yes — if factory fitted Reverse Camera Retention Yes — select models (see exclusion below) Camera Exclusion Trapezoid OEM radio 2021–2022 — not retained Dual USB Flush Mount Kit Included Plug & Play Yes Included Components HEIGH10, mounting kit, vehicle interface, camera harness, dual USB flush mount, ISO harness Compatible With / Goes Well With Suzuki Jimny 2018, 2019, 2020, 2021, 2022, 2023 Factory Suzuki Jimny steering wheel audio controls — where factory fitted Factory Suzuki Jimny reverse camera — select models (see caution below) Frequently Asked Questions Does the SRP-SZ001H include the HEIGH10 head unit? Yes — the Stinger HEIGH10 infotainment system is included, along with all vehicle-specific installation hardware. This is a complete all-in-one upgrade package. Will this kit retain my factory reverse camera? In most cases, yes — the kit includes a reverse camera retention harness for compatible Jimny models. However, Jimny vehicles fitted with the trapezoid OEM radio from 2021 to 2022 cannot retain the factory reverse camera using the included harness. Confirm your Jimny's factory radio type before purchase. How do I know if my Jimny has the trapezoid OEM radio? The trapezoid OEM radio features a distinctively shaped (non-rectangular) head unit surround in the factory dash. It was fitted to certain 2021–2022 Jimny variants. Will my steering wheel audio controls be retained? Yes — on Jimny models factory-fitted with steering wheel audio controls, these are retained via the included vehicle interface. If your Jimny does not have factory steering wheel audio controls, this feature is not applicable. Does the kit include a dual USB flush mount? Yes — a dual USB flush mount kit is included, allowing USB access points to be neatly integrated into the installation without external cables or adaptors. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Complete Mitsubishi Upgrade HEIGH10 10" Infotainment With CarPlay, iGo Navigation, SWC and Camera Retention Product Overview The Stinger SRP-MT001H is an all-inclusive infotainment replacement kit designed for a wide range of Mitsubishi vehicles from 2006 to 2021. Unlike a standard head unit swap, this kit combines the Stinger HEIGH10 10" infotainment system with all vehicle-specific hardware to retain steering wheel controls, factory reverse camera (on MMCS-equipped vehicles), and AUX connections delivering a genuinely complete, plug-and-play upgrade. At the heart of the kit is the Stinger HEIGH10 (UN1810) a 10" HD capacitive touchscreen with Apple CarPlay, Android Auto, AM/FM with RDS, dual USB, HDMI input, 4V 6-channel RCA output, digital sound processor with TOSLINK output, Bluetooth with aptX, and iGo navigation included. Compatible vehicles span the Mitsubishi ASX, Challenger, Outlander, Pajero, Pajero Sport, Triton, and the Peugeot 4008 covering a broad cross-section of popular Mitsubishi-platform vehicles sold in Australia. Please note: AUX retention applies only to vehicles where AUX is pinned to the 20-pin socket. Reverse camera retention applies only to vehicles fitted with the MMCS infotainment system cameras integrated into the factory rear view mirror are not retained. The Stinger HEIGH10 head unit is included. Key Specifications Manufacturer Part Number: SRP-MT001H Included head unit: Stinger HEIGH10 UN1810 (10" display) Screen size: 10" HD capacitive touchscreen Colour depth: 16.7 million colours Apple CarPlay: Yes Android Auto: Yes AM/FM radio: Yes — with RDS tuner Dual USB: Yes HDMI input: Yes RCA output: 4V, 6-channel Digital Sound Processor: Yes — with TOSLINK output Bluetooth: Yes — handsfree and audio playback with aptX iGo navigation: Yes — included (iGo navigation card) Steering wheel control retention: Yes (via SWI-MT01 interface) Reverse camera retention: Yes — MMCS-equipped vehicles only; not retained if in factory rear view mirror AUX retention: Yes — vehicles where AUX is pinned to 20-pin socket only Plug & Play: Yes Features & Benefits 10" HD Capacitive Touchscreen — The HEIGH10's 10" display with 16.7 million colour rendering replaces the factory head unit with a sharp, responsive modern interface across a wide range of Mitsubishi and Peugeot 4008 vehicles. Apple CarPlay & Android Auto — Wired CarPlay and Android Auto deliver access to navigation, music, calls, and messaging through the phone's interface on the 10" screen. iGo Navigation Included — Unlike many infotainment kits, the SRP-MT001H includes an iGo navigation card, providing onboard navigation without relying on a smartphone. 4V 6-Channel RCA Output + DSP — The HEIGH10's 4V 6-channel output and built-in DSP with TOSLINK output provides a strong foundation for connecting external amplifiers and audio processors. Steering Wheel Control Retention — The SWI-MT01 vehicle interface retains factory steering wheel audio buttons, keeping hands-free control functional after installation. Reverse Camera Retention — The AXBUCH-MI6V camera retention interface retains the factory reverse camera signal on vehicles equipped with the MMCS infotainment system. Note: camera retention does not apply if the factory camera is integrated into the rear view mirror. AUX Retention — Factory AUX is retained on vehicles where the AUX input is pinned to the 20-pin socket. Not all variants are supported — confirm before purchase. Complete Hardware Bundle — The kit includes the HEIGH10 (UN1810), BN25K2017 radio mounting kit, SWI-MT01 vehicle interface, AXBUCH-MI6V camera retention interface, CPH-STI01 ISO harness, and iGo navigation card. Technical Specs Specification Detail Part Number SRP-MT001H Included Head Unit Stinger HEIGH10 UN1810 Brand Stinger Screen Size 10" HD capacitive touchscreen Colour Depth 16.7 million colours Apple CarPlay Yes Android Auto Yes AM/FM Radio Yes — RDS tuner Dual USB Yes HDMI Input Yes RCA Output 4V, 6-channel Digital Sound Processor Yes — TOSLINK output Bluetooth Yes — handsfree + audio, aptX iGo Navigation Yes — included (navigation card) SWC Retention Yes — via SWI-MT01 Reverse Camera Retention Yes — MMCS vehicles only (not mirror-integrated) AUX Retention Yes — 20-pin socket vehicles only Plug & Play Yes Included Components HEIGH10 UN1810, BN25K2017 mounting kit, SWI-MT01 interface, AXBUCH-MI6V camera interface, CPH-STI01 ISO harness, iGo navigation card Compatible With / Goes Well With Mitsubishi ASX XB–XC 2013–2019 Mitsubishi Challenger PC 2013–2015 Mitsubishi Outlander ZG–ZH 2007–2012 Mitsubishi Outlander ZJ–ZK–ZL 2013–2021 Mitsubishi Pajero NS–NT–NW 2006–2015 Mitsubishi Pajero NT–NX 2015–2021 Mitsubishi Pajero Sport KR–KS–QE 2016–2018 Mitsubishi Triton MN 2013–2015 Mitsubishi Triton MQ 2015–2018 Mitsubishi Triton MR 2019–2021 Peugeot 4008 2014–2017 External amplifiers and processors via 4V 6-channel RCA output TOSLINK-compatible digital audio processors Frequently Asked Questions Does the SRP-MT001H include the HEIGH10 head unit? Yes — the Stinger HEIGH10 infotainment system (UN1810) is included, along with all vehicle-specific installation hardware and an iGo navigation card. This is a complete all-in-one upgrade package. Is iGo navigation included? Yes — unlike many HEIGH10 kits, the SRP-MT001H includes an iGo navigation card, providing onboard turn-by-turn navigation without requiring a smartphone. Will this kit retain my factory reverse camera? Only if your vehicle is fitted with the MMCS (Mitsubishi Multi-Communication System) infotainment system. If your factory reverse camera is integrated into the rear view mirror rather than connected through the MMCS system, it will not be retained by this kit. Will my factory AUX input be retained after installation? AUX retention applies only to vehicles where the AUX input is pinned to the 20-pin socket. Not all variants in the compatible range meet this condition — confirm your specific vehicle's AUX wiring configuration before purchase. Which Mitsubishi models does this kit cover? Compatible vehicles include the ASX (2013–2019), Challenger (2013–2015), Outlander (2007–2021), Pajero (2006–2021), Pajero Sport (2016–2018), Triton (2013–2021), and the Peugeot 4008 (2014–2017). See the full chassis code breakdown in the Compatible With section above. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Red CREE LED Rock Lights Built for the Worst Conditions IP68, Aluminium Housing, Off-Road Ready Product Overview The Stinger SPXULEDR is a 2-pod red CREE LED underbody and rock light set from the Stinger Powersports SPX range. Each pod houses three red CREE LEDs delivering 9W of output across a 120° beam angle, mounted in a die-cast aluminium IP68-rated housing that is waterproof, dustproof, and built for the harshest off-road environments. The pods mount on both flat and tubular surfaces via the included rubber mounting pads and hardware, giving flexible positioning in underbodies, wheel wells, engine compartments, and vehicle interiors. Operating on 12V DC, the SPXULEDR is compatible with standard automotive electrical systems. Certified to CE and RoHS standards. For off-road use only. Key Specifications Manufacturer Part Number: SPXULEDR LED colour: Red LED source: 3x CREE LED per pod LED power: 9W per pod Beam angle: 120° IP rating: IP68 (waterproof and dustproof) Housing material: Die-cast aluminium Housing colour: Black Operating voltage: 12V DC only Working temperature: -20°C to +40°C Dimensions (per pod): 70mm (L) x 35mm (W) x 10mm (H) Certifications: CE, RoHS Quantity: 2 pods Included: 2x LED pods, 2x rubber mounting pads, 4x mounting hardware Application: Off-road use only Features & Benefits IP68 Waterproof and Dustproof Housing — Full IP68 rating means the SPXULEDR is completely protected against dust ingress and continuous water immersion, making it suitable for the most demanding off-road, mud, and water crossing conditions. Bright Red CREE LEDs — Three CREE LEDs per pod deliver 9W of focused red light across a wide 120° beam angle, providing strong underbody and wheel well illumination for off-road visibility and style. Die-Cast Aluminium Construction — The rugged aluminium housing resists impact, vibration, and heat while keeping the pods lightweight enough for underbody and wheel well applications. Versatile Mounting — Rubber mounting pads support installation on both flat and tubular surfaces, enabling flexible positioning across underbodies, engine bays, wheel wells, and interior locations. Complete Mounting Kit Included — Rubber pads and hardware are included in the box, providing everything needed to mount both pods without additional hardware. CE and RoHS Certified — Meets CE electrical safety and RoHS hazardous substances standards, confirming compliance with international safety and environmental requirements. Technical Specs Specification Detail Part Number SPXULEDR Brand Stinger LED Colour Red LED Type CREE LED Count 3x per pod LED Power 9W per pod Beam Angle 120° IP Rating IP68 Housing Material Die-cast aluminium Housing Colour Black Operating Voltage 12V DC only Working Temperature -20°C to +40°C Dimensions (per pod) 70mm (L) x 35mm (W) x 10mm (H) Certifications CE, RoHS Quantity 2 pods Included 2x pods, 2x rubber mounting pads, 4x mounting hardware Application Off-road use only Compatible With / Goes Well With ATVs, UTVs, off-road vehicles, Jeeps, trucks, and 4WD vehicles Underbody, wheel well, engine compartment, and interior mounting locations Flat and tubular mounting surfaces Standard 12V DC automotive electrical systems Caution: The SPXULEDR is for off-road use only — it is not road-legal for on-highway vehicle use in Australia. Operating voltage is 12V DC only — do not use with 24V systems. Working temperature maximum is +40°C; confirm suitability for engine bay mounting positions where temperatures may exceed this limit. Frequently Asked Questions Is the SPXULEDR road-legal in Australia? No — the SPXULEDR is for off-road use only. Red underbody and rock lights are not road-legal for use on public roads in Australia. Use is restricted to off-road environments. What is the IP68 rating? IP68 is the highest common IP rating for ingress protection, indicating the pods are completely dustproof and protected against continuous water immersion beyond 1 metre. This makes the SPXULEDR suitable for river crossings, heavy rain, mud, and other extreme off-road water exposure. How many pods are included in the set? The SPXULEDR includes 2 LED pods, along with 2 rubber mounting pads and 4 pieces of mounting hardware for both pods. Can the SPXULEDR be mounted on tubular surfaces such as roll cages or bash bars? Yes — the rubber mounting pads support installation on both flat and tubular surfaces, allowing the pods to be mounted on roll cage tubing, bash bars, and other curved surfaces in addition to flat panels. What voltage do the SPXULEDR pods require? The SPXULEDR operates on 12V DC only. It is not compatible with 24V electrical systems. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Light Up the Trail ENLIGHT10 4ft Dynamic RGB Whip with 360° LEDs, IP65 Rated and Quick-Release Product Overview The Stinger SPXDW4 is a 4-foot dynamic RGB whip light from the ENLIGHT10 SPXD range, designed for off-road vehicles, ATVs, UTVs, and powersports applications. Built around 360° of dynamic RGB LEDs with fully customisable colour patterns, the SPXDW4 delivers a highly visible, personalised light show in the most demanding environments. The silicone-coated whip carries an IP65 rating, providing heavy-duty protection against water, mud, sand, dust, and debris. A quick-release mounting system allows the whip to be detached in seconds when not needed. Rugged watertight connectors are used throughout. The SPXDW4 is HEIGH10-compatible and can be controlled via the Stinger enLIGHT10 app on a smartphone. Key Specifications Manufacturer Part Number: SPXDW4 Whip length: 4ft (approximately 1.2m) LED configuration: 360° dynamic RGB Weather rating: IP65 Coating: Silicone Quick-release: Yes Connectors: Watertight ENLIGHT10 RGB module required: Yes — not included (SPXDBTC sold separately, or included with SPXDK4 / SPXDK8) HEIGH10 compatible: Yes App compatible: Yes — Stinger enLIGHT10 app (Bluetooth controller required) Included: 4ft dynamic RGB whip, extension harness, installation hardware Features & Benefits 360° Dynamic RGB LEDs — Full 360-degree illumination with variable dynamic colours, lighting patterns, and brightness levels — fully customisable via the enLIGHT10 app or HEIGH10 infotainment. IP65 Silicone Coating — The heavy-duty silicone outer coating is rated IP65, providing waterproof, shockproof, and dust-proof protection against the full range of off-road conditions — water, mud, sand, dirt, and debris. Quick-Release System — Detaches from the mounting point in seconds, making it simple to remove the whip for transport, storage, or when not in use without tools. HEIGH10 Compatible — Integrates directly with the Stinger HEIGH10 infotainment system (with SE-SXMHAR harness, sold separately) for in-dash lighting control alongside your audio and navigation. Stinger enLIGHT10 App Control — Full colour, pattern, and brightness control via the enLIGHT10 smartphone app when paired with the SPXDBTC Bluetooth controller (sold separately). Rugged Watertight Connectors — All connections use watertight connectors, maintaining the IP65-level protection through the full harness run. Extension Harness & Hardware Included — An extension harness and all necessary installation hardware are supplied in the box, reducing additional parts needed to complete the installation. Technical Specs Specification Detail Part Number SPXDW4 Brand Stinger Whip Length 4ft (~1.2m) LED Type Dynamic RGB LED Coverage 360° Weather Rating IP65 Coating Silicone Quick-Release Yes Connectors Watertight ENLIGHT10 RGB Module Required — not included HEIGH10 Compatible Yes App Control Yes — Stinger enLIGHT10 app (SPXDBTC required) Included 4ft RGB whip, extension harness, installation hardware Compatible With / Goes Well With Stinger ENLIGHT10 SPXDBTC Bluetooth controller (required RGB module — sold separately) Stinger ENLIGHT10 SPXDK4 rock light kit (includes RGB module) Stinger ENLIGHT10 SPXDK8 rock light kit (includes RGB module) Stinger HEIGH10 infotainment system (via SE-SXMHAR harness, sold separately) Stinger enLIGHT10 smartphone app Stinger SPXYADP Y adapter harness (sold separately) Off-road vehicles, ATVs, UTVs, Jeeps, trucks, and powersports vehicles Frequently Asked Questions Does the SPXDW4 include the RGB controller module? No — an ENLIGHT10 RGB module is required and is not included. The SPXDBTC Bluetooth controller is available separately, or is included with the SPXDK4 and SPXDK8 rock light kits if you are building a combined system. What is the IP rating of the SPXDW4? The SPXDW4 carries an IP65 rating, providing protection against water jets, heavy dust, mud, sand, and debris — built for genuine off-road and powersports environments. How does the quick-release system work? The SPXDW4 features a quick-release mounting system that allows the whip to be detached from its mount in seconds without tools — useful for removing it during transport, storage, or when it's not required for a particular trip. Can the SPXDW4 be controlled from a Stinger HEIGH10 head unit? Yes — the SPXDW4 is HEIGH10 compatible. Connection requires the SE-SXMHAR ENLIGHT10 replacement harness (sold separately) along with the HEIGH10 running the latest firmware. What is included in the box? The box includes the 4ft dynamic RGB whip, an extension harness, and installation hardware. The ENLIGHT10 RGB module (SPXDBTC) is not included and must be sourced separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Split Your ENLIGHT10 Harness Run Single 3-Pin Y Adapter, Plug-In Ready Product Overview The Stinger SPXYADP is a single 3-pin Y adapter harness for use with compatible Stinger ENLIGHT10 lighting products. It allows additional harness connections to be added to a lighting run, enabling more flexible layouts and extended coverage across an ENLIGHT10 installation. Unlike the SPXDMF solder-on connector pack, the SPXYADP is a pre-assembled harness a single unit providing an immediate plug-in Y connection point with no soldering required. Compatible ENLIGHT10 products are the SPXDK4, SPXDK8, SPXDE4, SPXDUBKIT, SPXD5, and SPXDBTC broader compatibility than the SPXDMF, covering more of the ENLIGHT10 SPXD range. Key Specifications Manufacturer Part Number: SPXYADP Function: 3-pin Y adapter harness for ENLIGHT10 harness expansion Compatible products: Stinger ENLIGHT10 SPXDK4, SPXDK8, SPXDE4, SPXDUBKIT, SPXD5, SPXDBTC Connector type: 3-pin Y harness (pre-assembled) Quantity: 1x harness Soldering required: No Application: ENLIGHT10 harness addition and layout customisation Features & Benefits Pre-Assembled Y Harness — Unlike solder-on connector packs, the SPXYADP is a ready-to-use pre-assembled harness — just plug in and extend your ENLIGHT10 lighting run without tools or soldering. Broad ENLIGHT10 Compatibility — Compatible with SPXDK4, SPXDK8, SPXDE4, SPXDUBKIT, SPXD5, and SPXDBTC — covering the majority of ENLIGHT10 SPXD products in a single accessory. Flexible Layout Expansion — Enables additional lighting products or harness branches to be added to an existing ENLIGHT10 installation, giving more options when a single run doesn't reach all mounting locations. Technical Specs Specification Detail Part Number SPXYADP Brand Stinger Function 3-pin Y adapter harness Connector Type 3-pin Y (pre-assembled) Quantity 1x harness Soldering Required No Compatible Products SPXDK4, SPXDK8, SPXDE4, SPXDUBKIT, SPXD5, SPXDBTC Application ENLIGHT10 harness addition and customisation Compatible With / Goes Well With Stinger ENLIGHT10 SPXDK4 Stinger ENLIGHT10 SPXDK8 Stinger ENLIGHT10 SPXDE4 Stinger ENLIGHT10 SPXDUBKIT Stinger ENLIGHT10 SPXD5 Stinger ENLIGHT10 SPXDBTC Caution: The SPXYADP is for use with Stinger ENLIGHT10 products only. Compatibility with other lighting systems or third-party accessories is not confirmed by the supplier. Frequently Asked Questions What is the SPXYADP used for? The SPXYADP is a pre-assembled 3-pin Y adapter harness that allows additional harness connections to be added to a compatible ENLIGHT10 lighting installation, enabling more flexible layout coverage without soldering. Does the SPXYADP require soldering? No — the SPXYADP is a pre-assembled harness and is plug-in ready. No soldering tools or additional hardware are required for installation. How many harnesses are included? The SPXYADP includes one 3-pin Y harness. If multiple Y connection points are needed, additional SPXYADP units will be required. Which ENLIGHT10 products is the SPXYADP compatible with? The SPXYADP is confirmed for use with Stinger ENLIGHT10 products SPXDK4, SPXDK8, SPXDE4, SPXDUBKIT, SPXD5, and SPXDBTC. What is the difference between the SPXYADP and the SPXDMF? The SPXYADP is a single pre-assembled plug-in Y harness — no soldering required. The SPXDMF is a pack of solder-on male and female connectors with heat shrink for those building custom harness sections. The SPXYADP suits a quick plug-in expansion; the SPXDMF suits a custom hardwired installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Expand Your ENLIGHT10 Lighting Run 3-Pin Y Harness Pack for SPXD5 and SPXDUBKIT Product Overview The Stinger SPXDMF is an 8-pack of 3-pin Y harness connectors designed for expanding or extending lighting harness runs on compatible Stinger ENLIGHT10 products. The pack contains four male and four female solder-on connectors, along with 16 pieces of heat shrink, providing the hardware needed to add additional harness sections to SPXD5 LED strip and SPXDUBKIT installations. This is a wiring accessory intended for use by those customising or extending their ENLIGHT10 lighting layout. It is for use with Stinger ENLIGHT10 SPXD5 and SPXDUBKIT only. Key Specifications Manufacturer Part Number: SPXDMF Function: 3-pin Y harness connectors for ENLIGHT10 harness expansion Compatible products: Stinger ENLIGHT10 SPXD5, SPXDUBKIT Contents: 4x female solder-on connectors, 4x male solder-on connectors, 16x heat shrink pieces Total connectors: 8 (4 male + 4 female) Connector type: 3-pin solder-on Application: ENLIGHT10 harness addition and customisation Features & Benefits Harness Expansion Made Simple — Provides the solder-on connectors and heat shrink needed to add additional ENLIGHT10 harness sections to an SPXD5 or SPXDUBKIT installation, without sourcing individual components. Matched Male and Female Pairs — The pack includes both male and female connectors in equal quantities (4 of each), covering the connection points needed for Y-harness splits and extensions. Heat Shrink Included — 16 pieces of heat shrink are supplied alongside the connectors, providing the insulation needed for clean, weatherproof solder joints without a separate hardware run. Customise Your Install — Enables a more flexible lighting layout by allowing additional harness branches to be added where the standard harness length or configuration doesn't reach. Technical Specs Specification Detail Part Number SPXDMF Brand Stinger Function 3-pin Y harness connectors for ENLIGHT10 Connector Type Solder-on, 3-pin Female Connectors 4x Male Connectors 4x Heat Shrink Pieces 16x Total Pack Contents 8 connectors + 16 heat shrink pieces Compatible Products Stinger ENLIGHT10 SPXD5, SPXDUBKIT Application Harness addition and customisation Compatible With / Goes Well With Stinger ENLIGHT10 SPXD5 LED strips Stinger ENLIGHT10 SPXDUBKIT Frequently Asked Questions What is the SPXDMF used for? The SPXDMF provides 3-pin solder-on Y harness connectors and heat shrink for adding additional harness sections to Stinger ENLIGHT10 SPXD5 and SPXDUBKIT installations, allowing a more customised or extended lighting layout. What is included in the pack? The pack contains 4x female solder-on connectors, 4x male solder-on connectors, and 16x heat shrink pieces — a total of 8 connectors with heat shrink for insulation. Do I need to solder to use the SPXDMF? Yes — the SPXDMF uses solder-on connectors. Soldering is required to attach the connectors to the harness. The included heat shrink provides insulation over the solder joints for a clean, weatherproof finish. Which ENLIGHT10 products is the SPXDMF compatible with? The SPXDMF is confirmed for use with Stinger ENLIGHT10 SPXD5 LED strips and the SPXDUBKIT only. It is not confirmed for use with other ENLIGHT10 products. Is the SPXDMF a plug-and-play accessory? No — the SPXDMF requires soldering. It is a wiring accessory for those customising or extending their ENLIGHT10 harness layout, not a plug-in solution. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Control Your ENLIGHT10 Lighting From Your HEIGH10 The Harness That Makes It Happen Product Overview The Stinger SE-SXMHAR is a replacement harness that connects compatible Stinger ENLIGHT10 SPXD lighting products to the Stinger HEIGH10 infotainment system, enabling direct lighting control from the HEIGH10's interface. Once connected, the HEIGH10 can change colours, toggle lights on and off, link lighting colour to match the HEIGH10's own illumination colour, and set lights to activate automatically with the vehicle's headlights via the AUTO function. Compatible ENLIGHT10 products are the SPXDBTC, SPXDK8, SPXDK4, and SPXDUBKIT. The HEIGH10 infotainment system must be running the latest firmware version for ENLIGHT10 integration to function. The harness can also be used alongside the enLIGHT10 by Stinger smartphone app for additional control options. Key Specifications Manufacturer Part Number: SE-SXMHAR Function: ENLIGHT10 to HEIGH10 connection harness Compatible head unit: Stinger HEIGH10 (latest firmware required) Compatible ENLIGHT10 products: SPXDBTC, SPXDK8, SPXDK4, SPXDUBKIT HEIGH10 firmware: Latest version required — update before installation Control functions: Colour change, on/off, link to HEIGH10 illumination colour, AUTO headlight trigger App compatible: Yes — enLIGHT10 by Stinger smartphone app Included: Harness only Features & Benefits HEIGH10 Lighting Integration — Connects ENLIGHT10 SPXD lighting directly to the HEIGH10 infotainment system, enabling full lighting control from the head unit's touchscreen interface without reaching for a separate remote or phone. Colour Matching — LINK Mode — The LINK function synchronises SPXD lighting colour to match the HEIGH10's own illumination colour, creating a coordinated interior and exterior lighting look. AUTO Headlight Trigger — Set to AUTO and the SPXD lights will turn on and off in sync with the vehicle's headlights, eliminating the need to manually control lighting every time the lights are switched. Dual Control — HEIGH10 or App — Lighting can be controlled from the HEIGH10 screen or the enLIGHT10 by Stinger smartphone app, giving flexible access from wherever is most convenient. Replacement Harness — Provides a direct replacement for a missing or damaged connection harness between the HEIGH10 and ENLIGHT10 products, restoring integration without needing new hardware. Technical Specs Specification Detail Part Number SE-SXMHAR Brand Stinger Function ENLIGHT10 to HEIGH10 connection harness Compatible Head Unit Stinger HEIGH10 (latest firmware required) Compatible ENLIGHT10 Products SPXDBTC, SPXDK8, SPXDK4, SPXDUBKIT HEIGH10 Firmware Latest version required Control Modes Colour change, on/off, LINK, AUTO App Control Yes — enLIGHT10 by Stinger app Included Harness only Compatible With / Goes Well With Stinger HEIGH10 infotainment system (latest firmware version) Stinger ENLIGHT10 SPXDBTC Bluetooth controller Stinger ENLIGHT10 SPXDK8 Stinger ENLIGHT10 SPXDK4 Stinger ENLIGHT10 SPXDUBKIT enLIGHT10 by Stinger smartphone app Caution: The HEIGH10 must be running the latest firmware version for ENLIGHT10 integration to function — update firmware before installation. The SE-SXMHAR is for use with Stinger HEIGH10 and ENLIGHT10 products only. Compatibility with other head units or third-party lighting systems is not confirmed. Frequently Asked Questions What does the SE-SXMHAR do? The SE-SXMHAR is a connection harness that links compatible Stinger ENLIGHT10 SPXD lighting products to the Stinger HEIGH10 infotainment system, enabling lighting control — including colour, on/off, LINK mode, and AUTO headlight trigger — directly from the HEIGH10 interface. Does the HEIGH10 need to be updated before using this harness? Yes — the HEIGH10 must be running the latest firmware version for ENLIGHT10 integration to function. Update the HEIGH10 firmware via the Stinger update process before connecting the SE-SXMHAR. Which ENLIGHT10 products work with the SE-SXMHAR? The SE-SXMHAR is confirmed compatible with Stinger ENLIGHT10 products SPXDBTC, SPXDK8, SPXDK4, and SPXDUBKIT. Can I still use the smartphone app after installing the SE-SXMHAR? Yes — the enLIGHT10 by Stinger app remains available as an alternative control method alongside the HEIGH10 interface, giving flexible control from either the head unit or a smartphone. What is included in the box? The box contains the connection harness only. The Stinger HEIGH10 infotainment system and ENLIGHT10 products are sold separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Take Full Control of Your ENLIGHT10 RGB Lighting App or RF Remote, All Weather, All Adventure Product Overview The Stinger SPXDBTC is a dynamic Bluetooth controller designed for use with Stinger ENLIGHT10 SPXD-series LED products. It allows simultaneous control of colours and lighting patterns across connected SPXD LED lights via the Stinger Lighting smartphone app or the included RF remote control giving full flexibility whether you're on the trail, on the water, or parked up. The controller is weatherproof with watertight connectors, making it suited to the environments where ENLIGHT10 lighting products are typically installed Jeeps, trucks, motorcycles, ATVs, UTVs, boats, and other off-road and powersports vehicles. Compatible SPXD products are the SPXDE4, SPXD5, and SPXDW4. The SPXDBTC is for use with the Stinger Lighting app and Stinger ENLIGHT10 products only. Key Specifications Manufacturer Part Number: SPXDBTC Function: Bluetooth + RF remote RGB lighting controller Control methods: Stinger Lighting smartphone app + included RF remote Compatible products: Stinger ENLIGHT10 SPXDE4, SPXD5, SPXDW4 Weatherproof: Yes — weatherproof controller body Connectors: Watertight App: Stinger Lighting app (required for app control) System: ENLIGHT10 products only Included: RF remote control, weatherproof Bluetooth controller, watertight connectors Features & Benefits Dual Control — App or RF Remote — Control colours and lighting patterns via the Stinger Lighting smartphone app for full feature access, or use the included RF remote for quick, no-phone adjustments on the go. Simultaneous Multi-Light Control — The SPXDBTC controls multiple connected SPXD LED products simultaneously, allowing coordinated colour and pattern changes across rocks, whips, and strips in a single operation. Weatherproof Controller & Watertight Connectors — The controller body is weatherproof and uses watertight connectors, making it suitable for exposed mounting positions in off-road, marine, and powersports applications. Broad Vehicle Application — Designed for use on Jeeps, trucks, motorcycles, ATVs, UTVs, boats, and other adventure and powersports vehicles where SPXD lighting is installed. SPXD LED Ecosystem — Pairs with SPXDE4 rock lights, SPXD5 LED strips, and SPXDW4 whip lights within the ENLIGHT10 SPXD product range, enabling a combined multi-product lighting setup from a single controller. Technical Specs Specification Detail Part Number SPXDBTC Brand Stinger Function Bluetooth RGB lighting controller with RF remote Control Methods Stinger Lighting app + RF remote Compatible Products SPXDE4, SPXD5, SPXDW4 System Stinger ENLIGHT10 only Controller Weatherproofing Yes — weatherproof Connectors Watertight App Required Stinger Lighting app (for app control) Included RF remote, weatherproof controller, watertight connectors Compatible With / Goes Well With Stinger ENLIGHT10 SPXDE4 rock lights Stinger ENLIGHT10 SPXD5 LED strips Stinger ENLIGHT10 SPXDW4 whip lights Stinger Lighting smartphone app (iOS and Android — confirm current platform support) Stinger SPXCLA cigarette lighter adaptor harness (sold separately) Caution: The SPXDBTC is for use with the Stinger Lighting app and Stinger ENLIGHT10 products only. It is not compatible with non-ENLIGHT10 LED systems or third-party RGB controllers. Confirm smartphone app availability for your device platform before purchase. Frequently Asked Questions What ENLIGHT10 products is the SPXDBTC compatible with? The SPXDBTC is confirmed compatible with Stinger ENLIGHT10 SPXDE4 rock lights, SPXD5 LED strips, and SPXDW4 whip lights. It is for use with Stinger ENLIGHT10 products and the Stinger Lighting app only. Can I control the SPXDBTC without a smartphone? Yes — the included RF remote control allows colour and pattern control without using the smartphone app, giving convenient wireless control in situations where phone access isn't practical. Is the controller suitable for outdoor and off-road use? Yes — the SPXDBTC features a weatherproof controller body and watertight connectors, making it suitable for exposed mounting positions in off-road, marine, motorcycle, ATV, UTV, and boat applications. What app is required to control the SPXDBTC? The Stinger Lighting app is required for smartphone-based control. Confirm current app availability for your device platform (iOS/Android) before purchase. What is included in the box? The kit includes the weatherproof Bluetooth controller, an RF remote control, and watertight connectors. Compatible ENLIGHT10 LED products are sold separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Power Your ENLIGHT10 From the Cig Socket Simple Adaptor With On/Off Switch Included Product Overview The Stinger SPXCLA is a cigarette lighter adaptor harness designed specifically for use with Stinger ENLIGHT10 products. It provides a clean, simple power connection from a standard 12V cigarette lighter socket to the ENLIGHT10 accessory via bullet terminals, with an on/off switch built in for convenient control without reaching for the unit itself. Compatible ENLIGHT10 products are the SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC. It is not a universal cigarette lighter adaptor use with non-ENLIGHT10 products is not confirmed by the supplier. Key Specifications Manufacturer Part Number: SPXCLA Function: Cigarette lighter adaptor to bullet terminals On/off switch: Yes — included Compatible products: Stinger ENLIGHT10 SPXDK8, SPXDK4, SPXDUBKIT, SPXDBTC Universal fit: No — ENLIGHT10 products only Included: Cig lighter adaptor to bullet terminals harness Features & Benefits Cigarette Lighter Power Connection — Draws power directly from a standard 12V cigarette lighter socket, allowing ENLIGHT10 products to be powered without hardwiring into the vehicle's electrical system. On/Off Switch Included — The built-in on/off switch provides simple power control without needing to unplug the adaptor or access the ENLIGHT10 unit itself. Bullet Terminal Output — Terminates in bullet connectors compatible with the ENLIGHT10 product range for a clean, secure connection. Plug and Go — A straightforward accessory that simplifies ENLIGHT10 installation, particularly for temporary or semi-permanent setups. Technical Specs Specification Detail Part Number SPXCLA Brand Stinger Function Cig lighter adaptor to bullet terminals On/Off Switch Yes — included Compatible Products SPXDK8, SPXDK4, SPXDUBKIT, SPXDBTC Application Stinger ENLIGHT10 products only Included Cig lighter adaptor harness with bullet terminals Compatible With / Goes Well With Stinger ENLIGHT10 SPXDK8 Stinger ENLIGHT10 SPXDK4 Stinger ENLIGHT10 SPXDUBKIT Stinger ENLIGHT10 SPXDBTC Frequently Asked Questions What Stinger products is the SPXCLA compatible with? The SPXCLA is confirmed for use with Stinger ENLIGHT10 products SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC only. It is not confirmed for use with other Stinger or third-party products. Does the SPXCLA include an on/off switch? Yes — an on/off switch is built into the harness, allowing the connected ENLIGHT10 product to be switched on or off without unplugging the adaptor from the cigarette lighter socket. What connector type does the SPXCLA use at the output end? The SPXCLA terminates in bullet terminals, matching the input connection on compatible ENLIGHT10 products. Can the SPXCLA be used as a general-purpose cigarette lighter adaptor? No — the SPXCLA is designed specifically for Stinger ENLIGHT10 products. It is not a universal cigarette lighter adaptor and should not be assumed compatible with other devices or accessories. What is included in the box? The box contains the cigarette lighter adaptor to bullet terminals harness with integrated on/off switch. No additional accessories are included. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less