10‚Äù Dual 4 Ohm Voice Coil Subwoofer Specifications: Peak Power (Watts) 1400 Rated Power (Watts) 350 Frequency Response 38Hz - 1.5kHz Sensitivity (dB) 87 Cone Size 10" Cone Material Pressed Paper Surround Material Butyl Rubber Basket Pressed Steel D.C. Coil Resistance (Re) (?) 4.18 Ohms Free Air Resonance (Fs) 45.30 Cone Area (SD) (cm¬≤) 356.33 Cone Area (SD) (In¬≤) 55.23 Linear Excurson (XMAX) (mm) 6.00 Linear Excurson (XMAX) (In) 0.24 Mechanical Excursion (mm) 9.00 Mechanical Excursion (In) 0.35 VAS (L) 19.31 VAS (CUFT) 0.07 Compliance (CMS) (?M/N) 107.00u M/N Force Factor (BI) (TM) 12.73 Mechanical Q (QMS) 2.72 Electrical Q (QES) 0.84 Total Loudspeaker Q (QTS) 0.64 Voice Coil Impedance 2 x 4 Ohm Mounting Depth 145mm (5-11/16") Mounting Diameter 230mm (9-1/16") Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

JBL BassPro SL2: Adds Deep Rich Bass to Your Existing Audio System! The JBL BassPro SL2 self-powered subwoofer fits under the front seat of many vehicles and adds deep full rich bass to your existing audio system. Its shallow-profile, 8" woofer is coupled with a custom tuned enclosure and is driven by a powerful Class D digital amplifier which makes it a powerful solution. A fully variable crossover and Bass EQ are on board to tune the JBL BassPro SL2 to your system. Proprietary, shallow-profile wooferThe 8" (200mm) woofer in the BassPro SL2 is designed specifically to provide low distortion and great bass performance in an ABS enclosure with a remarkably compact footprint. JBL BassPro SL2 Features: Shallow-profile woofer Efficient Class D amplifier Crossover control Flexible EQ adjustment Line and high-level inputs RBC control JBL BassPro SL2 Benefits: Slim-profile enclosure A crossover control and flexible EQ adjustments Remote bass control JBL BassPro SL2 Specifications: Woofer 8" (200mm) Amplifier Power 125W RMS Frequency Response 35Hz – 120Hz Fuse 15A Maximum Current Draw 12A Quiescent Current Draw <800mA Input Sensitivity 0.05V – 2V Line-Level Input; 0.5V – 20V High-Level Input Crossover Frequency 50Hz – 120Hz Crossover Slope 12dB/octave Bass Boost 0dB to +9dB @ 70Hz Dimensions (L x W x H) 13-9/16" x 9-7/8" x 2-13/16" (344mm x 250mm x 71mm) Legendary Products & Support From Authorized Dealers When you choose JBL, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JBL dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JBL's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JBL dealer today!

Read more less

Please note: This is a large item, and there may be additional freight charges. Provides Seamless and Smooth Sound Pioneer's A-series sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high impact bass that lets you hear and feel the music. Reinforced Cone Structure The cone structure of this subwoofer uses a highly rigid cone made with MICA injected molded resin which creates a rigid and durable cone, giving it the ability to produce accurate bass.  Shallow Compact Design  Our line of shallow subwoofers are designed to provide wider installation options for a broad range of vehicles. These shallow-mount subwoofers feature multiple patent-pending features to deliver the big bass performance of a full-size subwoofer, but in a compact design that can be installed either behind or under seats depending on the type of vehicle. The mounting depth is just 3-3/8‚Ä≥ – less than half a typical subwoofer in this class. Features: 1,500W Max (400W Nom) Single 4Œ© Voice Coil Glass Fibre & Mica Reinforced Injection Moulded Polypropylene (IMPP) Cone Construction Double Reinforced Spider Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Polk Audio DB+ Series 12" 1110W 4-Ohm Single Voice Coil Subwoofer with Marine Certification: Polk DB+ Series Subwoofers Provide Big Bass on a Budget Everything you love about Polk's Dynamic Balance technology‚Äîthat rich, clean, full-range sound‚Äîis built into the marine-tough, yet ruggedly sophisticated, DB+ series. And with its universal fit, it can be installed in any vehicle: Automobiles, motorcycles, boats, ATVs‚Äîyou name it.Polk Audio DB1242SVC Features: High Performance Audio Upgrade - Delivers a signature and quality sound that goes beyond OEM factory systems Shallow Mount Marine Certified - Built to last for cars, boats and ATVs with IP65 rating Rigid polypropylene cone and durable Santoprene surround Peak Power Handling - 1050W (370W RMS) High Performance UpgradeUpgrade from your OEM speaker system toward a bigger, fuller, high-performance sound. The high-grade materials used in our DB+ Series ensure you get an audio system that's designed and engineered to last much longer than your factory setup.Marine CertificationThe DB+ Series is IP55 rated so it's dirt- & water- resistant. It also has been tested for salt-fog, UV and humidity. A big part of that marine certification also means that each speaker has a non-corrosive plastic grille, a polypropylene UV tolerant cone, waterproof inner and outer surrounds, and stainless steel mounting hardware, ensuring that it's fully protected against the elements.Polypropylene UV Tolerant ConeEnjoy the peace of mind knowing each speaker cone is built to last, whose clean and polished look won't discolor or degrade over time while giving that important low end sound the high-performance it deserves.Waterproof Inner and Outer SurroundsCompletely blocks dirt, liquid and grime from entering the speaker housing, which helps minimize corrosion and maximize longevity of the entire speaker and its housing basket.Universal FitEnjoy a simple drop in installation for any vehicle including cars, boats, ATV's -- you name it. This quick and easy experience also ensures a faster installation process so you can get back to what matters with our great sound always along for the ride.Zero Tweeter ProtrusionEach speaker in the DB+ Series features a shallow tweeter design to ensure your factory speaker grille re-installs with ease for a flush, seamless look. Legendary Products & Support From Authorized Dealers When you choose Polk Audio, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Polk Audio dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Polk Audio's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Polk Audio dealer today!

Read more less

Provides Seamless and Smooth Sound Pioneer’s A-series sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high impact bass that lets you hear and feel the music. Reinforced Cone StructureThe cone structure of this subwoofer uses a highly rigid cone made with MICA injected molded resin which creates a rigid and durable cone, giving it the ability to produce accurate bass. Shallow Compact DesignOur line of shallow subwoofers are designed to provide wider installation options for a broad range of vehicles. These shallow-mount subwoofers feature multiple patent-pending features to deliver the big bass performance of a full-size subwoofer, but in a compact design that can be installed either behind or under seats depending on the type of vehicle. The mounting depth is just 2-5/8″ – less than half a typical subwoofer in this class. Pioneer TS-A2000LD2 Features: 700W Max (250W Nom) Dual 2Ω Voice Coil Glass Fibre & Mica Reinforced Injection Moulded Polypropylene (IMPP) Cone Construction Double Reinforced Spider Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

10" Punch P3S Shallow Stamped Steel Grille Insert Black. Fits Gen-2 P3S Trim Rings. Protects Against Cone and Surround Damage. Product Overview The Rockford Fosgate P3SG-10 is a 10" stamped steel mesh grille insert in black designed to protect the anodised aluminium cone and Santoprene surround of Gen-2 Punch P3S shallow subwoofers from physical damage in boot and under-seat installations. The grille inserts into the trim ring already fitted to the subwoofer no separate hardware is required. The trim ring (included with the P3S subwoofer) must be in place to hold the grille securely. Compatible with Gen-2 P3S 10" subwoofers specifically confirm the generation of your P3S subwoofer before purchasing, as this grille is not confirmed to fit all P3S variants. Key Specifications Part number: P3SG-10 Compatible size: 10 inch (shallow P3S) ✓ Grille type: Stamped mesh insert ✓ Material: Stamped steel ✓ Colour: Black ✓ Fitment: Inserts into Gen-2 P3S trim rings ✓ Trim ring required: Yes — trim ring supplied with subwoofer ✓ Generation compatibility: Gen-2 P3S only ✓ Protection: Surround and cone damage ✓ Compatible SKUs: Select Gen-2 P3S models — confirm with Rockford Fosgate Pack quantity: Not confirmed — confirm with Rockford Fosgate Dimensions: Not confirmed — confirm with Rockford Fosgate Weight: Not confirmed Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits Stamped Steel Mesh — Physical Cone and Surround Protection Boot environments expose subwoofer cones to contact damage from luggage, sporting equipment, and cargo movement. The stamped steel mesh sits across the woofer opening — preventing direct contact with the aluminium cone and Santoprene M-Roll surround that would otherwise be exposed in an open or grille-less installation. Stamped steel provides rigid protection while the mesh pattern allows bass to radiate without obstruction. Fits Gen-2 P3S Trim Rings — Simple Insertion Installation The grille inserts directly into the existing trim ring on the subwoofer — no drilling, fasteners, or adhesive required. The trim ring (already included with the P3SD2-10 or P3SD4-10) secures the grille in position. The installation is reversible — the grille can be removed for inspection or cleaning without tools. Black Finish — OEM Appearance The black powder or paint finish matches the P3S subwoofer's anodised cone aesthetic — maintaining a cohesive appearance in both open and grille-covered installations. Gen-2 P3S Specific — Precise Sizing The P3SG-10 is sized specifically for Gen-2 P3S 10" woofers. Confirm the generation of your subwoofer before purchasing — older P3S or standard (non-shallow) P3 models use different trim ring dimensions and this grille will not fit correctly. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P3SG-10 Series Punch P3S (Shallow) Gen-2 Compatible Size 10 inch shallow ✓ Grille Type Stamped Mesh Insert ✓ Material Stamped Steel ✓ Colour Black ✓ Fitment Inserts into Gen-2 P3S trim ring ✓ Trim Ring Required Yes (supplied with subwoofer) ✓ Generation Gen-2 P3S only ✓ Compatible SKUs Select Gen-2 P3S models (confirm with Rockford Fosgate) Pack Quantity Not confirmed Dimensions Not confirmed Weight Not confirmed Warranty Not confirmed Compatible With / Goes Well With Confirmed compatible platform: Gen-2 Punch P3S 10" shallow subwoofers  Likely compatible (confirm before purchasing): Rockford Fosgate P3SD2-10 Punch P3S 10" Shallow 2-Ohm DVC Subwoofer Rockford Fosgate P3SD4-10 Punch P3S 10" Shallow 4-Ohm DVC Subwoofer Frequently Asked Questions Does the trim ring come with the P3SG-10? No — the grille inserts into the trim ring that is already supplied with the P3S subwoofer. The P3SG-10 grille insert only — the trim ring is included with the P3SD2-10 or P3SD4-10 subwoofer purchase. Will the P3SG-10 fit older (non-Gen-2) P3S subwoofers? The P3SG-10 is sized for Gen-2 P3S trim rings specifically. Confirm the generation of your P3S subwoofer with Rockford Fosgate before purchasing — the grille will not fit correctly in earlier-generation trim rings. Does this grille affect bass output? The stamped mesh design is an open structure — bass frequencies radiate through the mesh without significant acoustic obstruction. Some minor high-frequency colouration from the mesh is possible but bass output is not meaningfully affected. Is the P3SG-10 sold as a single unit or a pair? Pack quantity is not confirmed in the supplier data. Confirm from the official Rockford Fosgate P3SG-10 product page before ordering to ensure you purchase the correct quantity for a stereo subwoofer installation. Is there a grille available for the P3S 12" and 8" subwoofers? Yes — the P3SG-12 is the corresponding grille for the 12" P3S platform. An 8" variant (P3SG-8) may also exist — confirm all available P3S grille insert SKUs with Rockford Fosgate. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" P3S Shallow 4-Ohm DVC 300W RMS, 83dB, 42Hz Fs, 89mm Depth, 230mm Cutout. Confirmed Enclosure Volumes: 14.1L Sealed, 28.3L Vented. Product Overview The Rockford Fosgate Punch P3SD4-10 is a 10" 4-Ohm Dual Voice Coil (DVC) shallow subwoofer rated at 300W RMS (600W peak) the most completely specified P3S model in the supplier data. The full specification set includes 83dB sensitivity, 42Hz free-air resonance, 8.1mm Xmax, 89mm (3.50") mounting depth, 230mm (9.06") cutout diameter, and Rockford Fosgate's confirmed enclosure recommendations: 0.5 cu ft (14.1 litres) sealed, 1.0 cu ft (28.3 litres) vented. CEA-2031 compliant. Input terminals are confirmed Dual 10-AWG compression consistent with the P3D2-10 and P2D4-10 spec tables, and confirming that "push terminals" in P3S features lists is a supplier data error. The 4-Ohm DVC provides wiring options of 2-Ohm (parallel), 8-Ohm (series), or 4-Ohm per coil for bi-amplification no 1-Ohm stability requirement. All confirmed P3S construction applies: anodised aluminium cone and dustcap, M-Roll Santoprene surround, dual linear spider, StampCast basket with spider venting, and diamond-cut cast aluminium trim ring. Key Specifications Subwoofer size: 10 inch (shallow) Voice coil configuration: Dual Voice Coil (DVC) Impedance: 4-Ohm per coil (2-Ohm parallel / 8-Ohm series / 4-Ohm biamp) Power handling (RMS): 300W ✓ (CEA-2031) Power handling (peak): 600W ✓ Sensitivity (SPL): 83dB @ 1W/1M ✓ Free-air resonance (Fs): 42Hz ✓ Xmax: 8.1mm ✓ Mounting depth: 3.50" (89mm) ✓ Cutout diameter: 9.06" (230mm) ✓ Voice coil diameter: 2.5" (65.5mm) ✓ Magnet weight: 47 oz (1.32 kg) ✓ Effective piston area (Sd): 333 cm² ✓ Equivalent air volume (Vas): 14.3 litres ✓ Total Q (Qts): 0.78 ✓ Electrical Q (Qes): 0.90 ✓ Mechanical Q (Qms): 6.00 ✓ Voice coil inductance (Le): 4.3 mH ✓ DC resistance (Re): 6.80 Ohms ✓ Woofer displacement: 0.074 cu ft (2.1 litres) ✓ Recommended sealed enclosure: 0.5 cu ft (14.1L) ✓ Recommended vented enclosure: 1.0 cu ft (28.3L) ✓ Shipping weight: 11.9 lbs (5.39 kg) ✓ CEA-2031 compliant: Yes ✓ Input terminals: Dual 10-AWG compression ✓ Cone: Anodised aluminium ✓ Dustcap: Anodised aluminium ✓ Surround: M-Roll Santoprene ✓ Spider: Dual linear with embedded 16 AWG tinsel leads ✓ Basket: StampCast with integrated spider venting ✓ Trim ring: Diamond-cut cast aluminium (grille insert compatible) ✓ Motor assembly: Shallow ✓ Enclosure compatibility: Sealed and vented ✓ Sold as: Individual unit Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 300W RMS / 600W Peak — CEA-2031 — 300W RMS confirmed to the CEA-2031 standard — the same sustained power as the P3SD2-10, delivered in the 4-Ohm impedance format. 89mm Mounting Depth — Confirmed — At 3.50" (89mm), the P3SD4-10's mounting depth is confirmed. This is significantly shallower than the standard P3D2-10 (156.8mm) — making the P3SD4-10 suitable for shallow enclosures, rear doors with limited depth, or under-seat installations that the full-depth P3 cannot fit. 230mm Cutout Diameter — The confirmed 9.06" (230mm) cutout is slightly smaller than the standard 10" P3 (232mm) — check baffle dimensions against this confirmed figure. Confirmed Enclosure Volumes: Sealed: 0.5 cu ft (14.1 litres) Vented: 1.0 cu ft (28.3 litres) 83dB Sensitivity — The 83dB @ 1W/1M is slightly lower than the standard P3D4-10 (from the P3D2-10's 82dB reference), consistent with the shallow motor's Fs of 42Hz and Qts of 0.78. 42Hz Free-Air Resonance (Fs) — The Fs of 42Hz is higher than full-depth P3 subwoofers (P3D2-10: 26.6Hz), reflecting the shallow motor's stiffer suspension. This affects the enclosure design: the sealed box resonance will be higher than full-depth drivers in the same volume. 8.1mm Xmax — 8.1mm of linear peak excursion — less than the 15.2mm of the full-depth P3D2-10, consistent with the shallow motor's reduced excursion range. Qts = 0.78 — The higher Qts (versus 0.49 for the full-depth P3D2-10) is characteristic of shallow motor designs. At 0.78, the driver is well-suited to the 14.1L sealed box recommendation; the vented alignment at 28.3L provides additional output at bass frequencies above the port tuning point. 4-Ohm DVC — Broad Amplifier Compatibility: 2-Ohm (parallel): Most common configuration 8-Ohm (series): For amplifiers with higher minimum impedance 4-Ohm per coil (biamp): Separate channels Compression Terminals Confirmed — The spec table confirms Dual 10-AWG compression — the correct terminal type across the P2/P3/P3S range. Update all P3S features list descriptions accordingly. Anodised Aluminium Cone, M-Roll Santoprene Surround — P3S platform materials confirmed. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P3SD4-10 Series Punch P3S (Shallow) Subwoofer Size 10 inch (shallow) Voice Coil Dual Voice Coil (DVC) Impedance per Coil 4-Ohm ✓ Wiring Options 2-Ohm (parallel) / 8-Ohm (series) / 4-Ohm biamp ✓ Power Handling (RMS) 300W ✓ (CEA-2031) Power Handling (Peak) 600W ✓ Sensitivity 83dB @ 1W/1M ✓ Fs 42Hz ✓ Xmax 8.1mm ✓ Cutout Diameter 9.06" (230mm) ✓ Mounting Depth 3.50" (89mm) ✓ Voice Coil Diameter 2.5" (65.5mm) ✓ Magnet Weight 47 oz (1.32 kg) ✓ Sd 333 cm² ✓ Vas 14.3 litres ✓ Qts 0.78 ✓ Qes 0.90 ✓ Qms 6.00 ✓ Le 4.3 mH ✓ Re 6.80 Ohms ✓ Woofer Displacement 0.074 cu ft / 2.1L ✓ Sealed Enclosure (Vb) 0.5 cu ft (14.1L) ✓ Vented Enclosure (Vb) 1.0 cu ft (28.3L) ✓ Shipping Weight 11.9 lbs (5.39 kg) ✓ CEA-2031 Compliant Yes ✓ Input Terminals Dual 10-AWG Compression ✓ Cone Anodised Aluminium ✓ Dustcap Anodised Aluminium ✓ Surround M-Roll Santoprene ✓ Spider Dual Linear, Embedded 16 AWG Tinsel Leads ✓ Basket StampCast with Integrated Spider Venting ✓ Motor Shallow ✓ Trim Ring Diamond-Cut Cast Aluminium (Grille Compatible) ✓ Enclosure Type Sealed and Vented ✓ Sold As Individual Unit Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Confirmed enclosure volumes: Sealed: 0.5 cu ft (14.1 litres) net internal Vented: 1.0 cu ft (28.3 litres) net internal — confirm port dimensions from Rockford Fosgate Wiring: 2-Ohm → parallel 8-Ohm → series 4-Ohm per coil → biamp Pairs well with: A mono amplifier rated at 300W RMS at 2-Ohm A shallow sealed 14.1L or vented 28.3L enclosure Weight 5.39 kg (11.9 lbs) Frequently Asked Questions What are the confirmed enclosure volumes for the P3SD4-10? Sealed: 0.5 cu ft (14.1 litres); Vented: 1.0 cu ft (28.3 litres). Both are Rockford Fosgate's official confirmed recommendations. Confirm vented port dimensions from the official P3SD4-10 installation guide. Why is the Fs of the P3SD4-10 higher than a full-depth subwoofer? An Fs of 42Hz reflects the shallow motor's stiffer suspension — required to control the cone within a reduced excursion range. Full-depth subwoofers with long-travel motors have lower Fs values (e.g. the P3D2-10 at 26.6Hz) because their suspensions are more compliant over a greater travel distance. The higher Fs means the P3SD4-10's useful bass extension begins at a higher frequency than full-depth drivers. What is the confirmed mounting depth? 89mm (3.50") — confirmed in the specification table. What does the 230mm cutout mean for enclosure building? A 9.06" (230mm) cutout is required in the baffle. This is 2mm smaller than the standard 232mm cutout on the full-depth P3D4-10 and P2D4-10 — a meaningful difference if using a pre-drilled enclosure. Confirm the exact cutout before purchase. Are the terminals push or compression? The specification table confirms Dual 10-AWG compression terminals — the correct type across the P2, P3, and P3S range. The "push terminals" language in features lists is a consistent supplier data error. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12" 2-Ohm DVC Punch P2 Subwoofer 400W RMS, Kevlar Cone, VAST, Dual Spider, Diamond-Cut Cast Aluminium Trim Ring, Extended Pole Piece. Product Overview The Rockford Fosgate Punch P2D2-12 is a 12" 2-Ohm Dual Voice Coil (DVC) subwoofer rated at 400W RMS the highest confirmed power rating in the Punch P2 series to this point in the catalogue, and a 100W step up from the P2 10" models. The larger 12" cone moves more air than the 10" format for greater bass output and lower frequency extension. The 2-Ohm DVC provides wiring options of 1-Ohm (parallel), 4-Ohm (series), or 2-Ohm per coil for bi-amplification. Optimised for sealed and vented enclosures. Sold as an individual unit. All confirmed Punch P2 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, dual linear spider with embedded 16 AWG tinsel leads, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, diamond-cut cast aluminium trim ring with grille insert provision, and protective PVC textured magnet cover. Key Specifications Subwoofer size: 12 inch Voice coil configuration: Dual Voice Coil (DVC) Impedance: 2-Ohm per coil (1-Ohm parallel / 4-Ohm series / 2-Ohm biamp) Power handling (RMS): 400W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Dual linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: Features: push — confirm vs compression with Rockford Fosgate Trim ring: Diamond-cut cast aluminium (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 400W RMS — 400W RMS is the highest confirmed power handling in the P2 series and among all subwoofers in this catalogue to date. Requires an amplifier rated at 400W RMS at the selected impedance configuration. 12" Cone — Greater Air Movement — More air movement and lower frequency extension than the 10" P2D2-10 in comparable enclosures. 2-Ohm DVC — Three Wiring Options: 1-Ohm (parallel): Confirm amplifier rated stable at 1-Ohm before use 4-Ohm (series): Broad amplifier compatibility 2-Ohm per coil (biamp): Separate amplifier channels Dual Linear Spider — Two spiders for improved compliance linearity and cone control at high excursion. Kevlar Fibre-Reinforced Paper Cone with VAST — Stiffened paper cone plus up to 25% increased effective radiating area. Nomex® Voice Coil Reinforcement Collar — Thermal and mechanical durability at 400W sustained. Extended Pole Piece and Bumped Vented Backplate — Increased linear excursion; air spring prevention. Diamond-Cut Cast Aluminium Trim Ring — Premium machined aluminium finish with grille insert provision. StampCast Basket with Integrated Spider Venting — Motor cooling. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P2D2-12 Series Punch P2 Subwoofer Size 12 inch Voice Coil Dual Voice Coil (DVC) Impedance per Coil 2-Ohm ✓ Wiring Options 1-Ohm (parallel) / 4-Ohm (series) / 2-Ohm biamp ✓ Power Handling (RMS) 400W ✓ Peak Power Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Fs / Xmax / Qts Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified — confirm with Rockford Fosgate Mounting Depth Not specified — confirm with Rockford Fosgate Surround Technique VAST ✓ Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Dual Linear, Embedded 16 AWG Tinsel Leads ✓ Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals Features: push — confirm vs compression with Rockford Fosgate Trim Ring Diamond-Cut Cast Aluminium (Grille Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ CEA-2031 Compliant Not confirmed — confirm with Rockford Fosgate Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed and vented — both confirmed Fitment caution: Cutout diameter, mounting depth, and enclosure volumes not confirmed. Pull from the official Rockford Fosgate P2D2-12 datasheet before building or selecting an enclosure. 1-Ohm wiring caution: Confirm amplifier stability at 1-Ohm before using the parallel configuration. Amplifier note: 400W RMS requires an amplifier rated at 400W RMS at the selected impedance. This is above the 300W rating of the T1000-1BDCP at 2-Ohm — confirm specific amplifier output at the intended load. Pairs well with: Rockford Fosgate T1500-1BDCP or T2500-1BDCP mono amplifiers — confirm RMS output matches 400W at the selected impedance Frequently Asked Questions What amplifier power does the P2D2-12 require? 400W RMS at the selected wiring impedance. This is 100W higher than the P2 10" models. Confirm your amplifier's CEA-2031 rated RMS output at 1-Ohm, 4-Ohm, or 2-Ohm (per coil) before purchasing. What enclosure volume is recommended? Enclosure volumes are not confirmed in the supplier data. Pull the official Rockford Fosgate P2D2-12 datasheet for sealed and vented recommendations. What are the wiring options? 1-Ohm (parallel — confirm amplifier stability), 4-Ohm (series), or 2-Ohm per coil for bi-amplification. Is a grille available? The diamond-cut cast aluminium trim ring accommodates an optional grille insert. Confirm the compatible SKU with Rockford Fosgate. What is the terminal type on the P2D2-12? The features list states "nickel plated push terminals." The P2D4-10 spec table reveals "compression terminals" — a conflict across the P2 range. Confirm the correct terminal type with Rockford Fosgate, as this applies to all P2 subwoofer models simultaneously. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12" 4-Ohm SVC Punch Subwoofer 250W RMS, Kevlar Fibre-Reinforced Paper Cone, VAST, Nomex® Voice Coil Collar, Extended Pole Piece, 10-AWG Nickel Push Terminals. Product Overview The Rockford Fosgate Punch P1S4-12 is a 12" 4-Ohm Single Voice Coil (SVC) subwoofer rated at 250W RMS the 4-Ohm variant of the 12" Punch P1 platform. Identical construction to the P1S2-12 with the sole difference being the 4-Ohm voice coil impedance, which suits a broader range of mono amplifiers than the 2-Ohm variant. Optimised for sealed and vented enclosures. Sold as an individual unit. All confirmed Punch P1 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, 10-AWG nickel-plated push terminals, rubberized ABS trim ring with grille insert provision, and protective PVC textured magnet cover. Key Specifications Subwoofer size: 12 inch Voice coil configuration: Single Voice Coil (SVC) Impedance: 4-Ohm Power handling (RMS): 250W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: 10-AWG nickel-plated push terminals Trim ring: Rubberized ABS (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 4-Ohm SVC — Broad Amplifier Compatibility — A 4-Ohm SVC presents a universally compatible load to most mono subwoofer amplifiers. Two P1S4-12 units in parallel = 2-Ohm; in series = 8-Ohm. 12" Cone — Larger cone area than the 10" P1 models for greater air movement, more bass output, and lower frequency extension. 250W RMS — Confirmed 250W RMS sustained power handling. Kevlar Fibre-Reinforced Paper Cone — Kevlar reinforcement for improved stiffness and breakup resistance at high output levels, with paper's natural damping and low mass. VAST — Up to 25% increased effective cone area for improved efficiency and output. Nomex® Voice Coil Reinforcement Collar — Heat and mechanical reinforcement at the voice coil-to-cone junction. Extended Pole Piece and Bumped Vented Backplate — Extended pole for increased Xmax; vented backplate eliminates air spring compression. 10-AWG Nickel-Plated Push Terminals — Heavier gauge for lower contact resistance at 250W. StampCast Basket with Integrated Spider Venting — Motor cooling during operation. Rubberized ABS Trim Ring / Grille Provision / PVC Magnet Cover — Clean installation finish with optional grille. Sealed and Vented Compatible — Both enclosure types confirmed. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1S4-12 Series Punch P1 Subwoofer Size 12 inch Voice Coil Single Voice Coil (SVC) Impedance 4-Ohm ✓ Power Handling (RMS) 250W ✓ Peak Power Not specified Surround Technique VAST (up to 25% increased cone area) ✓ Sensitivity Not specified Frequency Response Not specified Xmax Not specified Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals 10-AWG Nickel-Plated Push Terminals ✓ Trim Ring Rubberized ABS (Grille Insert Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ Mounting Depth Not specified Cutout Diameter Not specified Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed — tight, accurate bass Vented — higher efficiency at tuning frequency Wiring: 4-Ohm SVC — single 4-Ohm load per unit Two units in parallel = 2-Ohm; two units in series = 8-Ohm Pairs well with: Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers at 4-Ohm Frequently Asked Questions What is the difference between the P1S4-12 and P1S2-12? Both are identical 12" Punch P1 subwoofers with the same 250W RMS rating and construction. The only difference is impedance: the P1S4-12 is 4-Ohm SVC, the P1S2-12 is 2-Ohm SVC. The 4-Ohm is compatible with a wider range of amplifiers; the 2-Ohm suits amplifiers that produce their maximum rated output at 2-Ohm. What amplifier power is appropriate? 250W RMS at 4-Ohm. Confirm the amplifier's RMS output at 4-Ohm before purchasing. What enclosure volume is recommended? Not confirmed in the supplier data. Pull the official Rockford Fosgate P1S4-12 datasheet for sealed and vented volume recommendations. Is a grille available? The rubberized ABS trim ring accommodates an optional grille insert. Confirm the compatible grille SKU with Rockford Fosgate. Does this subwoofer suit trucks as well as cars? The supplier description confirms this model is designed for cars and trucks. The sealed and vented enclosure compatibility provides flexibility for the range of install locations common in both passenger vehicles and utes, vans, and trucks. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

“The Champion Has Returned” Pioneer’s latest “Champion” series sub-woofers are here. The TS-W312S4 is designed to take the “Champion” Series name to the next level with a range of improvements.With a light weight/high rigidity cone design, dual layer hybrid surround, large powerful motor assembly and enclosed basket structure, the new “Champion” Series sub-woofers not only look good but will perform even better!Match with Pioneer’s GM-D Series amplifiers for an impressive in car experience!Rigid Cone ConstructionCombining a large rigid centre cap and lightweight high rigidity cone structure improves output performance and reduces loss. Improved dual layer (elastic polymer & fibre) hybrid surround provides a lighter and more durable surround than traditional rubber compounds. Powerful Motor AssemblyCombining a double stacked 90oz magnet (26% bigger than our previous model and some of the heaviest in it’s class) with a longer voice coil design, the “Champion” Series sub-woofers are designed for high power handling and endurance! Pioneer TS-W312S4 Features: 1600W Max (500W Nom) High Rigidity (IMPP) Composite Seamless Cone Construction with Honeycomb Design Dual Layer (Elastic Polymer & Fibre) Surround for A Highly Durable Design Massive 90 oz Double Stacked Magnet & Long Voice Coil with Aluminium Bobbin for Increased Bass & Improved Heat-Dispersion Pioneer TS-W312S4 Specifications: Size: 12" Continuous Power Handling (RMS): 500W Maximum Peak Power Handling: 1600W Impedance: Single 4Ω Woofer Composition: Injection Molded Polypropylene (IMPP) with Honeycomb Design Woofer Surround: Dual Layer (Elastic Polymer & Fibre) Woofer Magnet Composition: Ferrite Magnet Weight: 90 oz Mounting Depth: 157mm Hi-Res Certified: No Sensitivity (1W / 1m): 92dB Frequency Range: 20Hz - 1.6kHz Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

High-Performance Car Audio Very high power and performance, excellent midrange, and extended mid high-frequency range.   Legendary Products & Support From Authorized Dealers When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Orion dealer today!

Read more less

Stage Series Car Subwoofer from JBL! Great performing subwoofers at high velocity price points available in three sizes designed for a variety of box types and installations. JBL Stage 122 Features: Automotive grade PP cone and rubber for reliable performance Speakers are carefully tuned to assure high SPL and low distortion Single 4-ohm and dual 4-ohm voice coil subwoofer SKU options are available for 12” subwoofer JBL Stage 122 Benefits: Reliable performance Competitive price JBL Stage 122 Specifications: Peak Power: 1000 watts RMS Power: 250 watts Polypropylene Cone Rubber Surround Impedance: Dual 4 ohms Mount depth: 5.94" Sensitivity: 91 dB Legendary Products & Support From Authorized Dealers When you choose JBL, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JBL dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JBL's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JBL dealer today!

Read more less