6.5dBi UHF CB Antenna (ANU226) – Durable, Elevated Feed With Heavy-Duty Barrel Spring! 6.5dBi UHF CB Antenna (ANU226)A 6.5dBi Antenna with Heavy-Duty Barrel Spring with Elevated Feed and Fibreglass Whip. Length including spring and base: 860mm. The thread size for the whip (Not the spring base) is 5/16 UNC. Features: The length of the antenna is 860mm. Low-Loss Coaxial Cable Included (4.5M) The thread size for the whip (Not the spring base) is 5/16 UNC. Pre-terminated FME connector and PL259 adaptor. Specifications: Gain: 6.5dBi Antenna Type: Elevated Feed With Fibreglass Whip Length: 860mm Mounting Base: Heavy-Duty Barrel Spring Whip Thread Size: 5/16 UNC Coaxial Cable: Low-Loss, 4.5M (Included) Connector: Pre-Terminated FME With PL259 Adaptor Weight: 0.72kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Durable fiberglass antenna with heavy-duty spring base for reliable 4WD communications The Oricom ANU916 3dBi UHF CB Antenna delivers reliable communication performance through a detachable fiberglass whip design with integrated heavy-duty barrel spring base. This 640mm antenna system (including spring) combines the flexibility needed to survive offroad impacts with the rigidity required for consistent signal transmission. The fiberglass radome construction withstands branch strikes, car wash encounters, and low-clearance obstacles without permanent damage, while the barrel spring base absorbs impacts that would break fixed-mount antennas. The detachable pole design simplifies replacement after damage and enables quick removal for secure storage or height-restricted areas. Complete with 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor, the ANU916 provides everything needed for installation on 4WD vehicles, heavy vehicles, and touring setups. The black powder-coated finish integrates cleanly with modern vehicle aesthetics while protecting against corrosion in Australian conditions. Whether coordinating convoy travel, maintaining worksite communications, or ensuring emergency contact capability in remote areas, this antenna balances durability with practical 3dBi gain performance. Key Specifications Antenna Gain: 3dBi Total Length: 640mm (including spring base) Construction: Fiberglass radome with detachable pole Base Type: Heavy-duty barrel spring Coaxial Cable: 4.5m low-loss cable included Connector: Pre-terminated FME connector with PL259 adaptor Mounting: Grub screw attachment (grub screw and hex key included) Finish: Black powder coating Warranty: 3 years Features & Benefits Detachable Fiberglass Whip — Remove the antenna pole for secure storage, car wash protection, or low-clearance situations, then reinstall quickly without tools or technical knowledge. Heavy-Duty Barrel Spring Base — Absorbs impacts from branches, obstacles, and offroad terrain, allowing the antenna to flex and return without damage that would break rigid-mount alternatives. 3dBi Gain Performance — Provides balanced transmission and reception characteristics suitable for convoy communications, worksite coordination, and general touring applications across typical UHF CB ranges. 640mm Overall Length — Compact profile reduces clearance concerns in garages, car washes, and low-hanging obstacles while maintaining effective signal propagation for practical communication distances. Fiberglass Radome Construction — Non-conductive fiberglass housing protects internal elements while providing flexibility and impact resistance superior to metal whip designs in demanding conditions. Complete Installation Kit — Includes 4.5-metre low-loss coaxial cable, pre-terminated FME connector, PL259 adaptor, grub screw, and hex key for immediate installation without sourcing additional components. Secure Grub Screw Mounting — Hex key-tightened grub screw ensures positive antenna retention under vibration and offroad conditions while allowing intentional removal when needed. Black Powder Coat Finish — Durable coating protects against UV degradation, salt corrosion, and chemical exposure while matching modern vehicle aesthetics for clean integration. Three-Year Warranty — Extended warranty coverage reflects manufacturer confidence in durability and construction quality for demanding Australian applications. Technical Specs Model: ANU916 Antenna Type: UHF CB whip antenna Gain: 3dBi Total Length: 640mm (including spring base) Pole Construction: Detachable fiberglass radome Base Type: Heavy-duty barrel spring Mounting Method: Grub screw with hex key (included) Coaxial Cable Length: 4.5m Cable Type: Low-loss coaxial Connector Type: Pre-terminated FME connector Adaptor Included: PL259 adaptor Surface Finish: Black powder coating Warranty Period: 3 years Frequently Asked Questions Can I replace just the antenna pole if it gets damaged? Yes, the fiberglass whip is detachable. Replacement poles like the ANT916PNK (pink) are available separately, allowing pole replacement without purchasing a complete antenna system. Will the spring base protect the antenna from all impacts? The heavy-duty barrel spring absorbs most typical offroad impacts from branches and obstacles, but extreme forces or direct strikes may still cause damage. The spring significantly improves survival compared to rigid mounts. What vehicles is this antenna suitable for? The ANU916 suits 4WD vehicles, utes, heavy vehicles, caravans, and touring setups requiring reliable UHF communications. Verify mounting location clearance and ensure proper antenna base installation. Do I need to purchase a separate antenna base or mount? The antenna includes a barrel spring base with grub screw mounting, but you'll need an appropriate UHF antenna mount or bracket (like Oricom BBR series bonnet brackets) to attach the antenna to your vehicle. How does 3dBi gain compare to higher-gain antennas? 3dBi antennas provide balanced omnidirectional performance suitable for general touring and convoy use. Higher-gain antennas (6dBi, 9dBi) offer increased range but with narrower vertical radiation patterns that may miss signals on undulating terrain. Compatible With Oricom BBR series bonnet brackets (BBR001-BBR007) Oricom UHF CB radios and communication systems 4WD vehicles, heavy vehicles, and touring setups Standard UHF antenna mounts and brackets ANT916PNK replacement pole (pink colour option) Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Distinctive pink fiberglass antenna with heavy-duty spring base for reliable 4WD communications The Oricom ANU856PNK 3dBi UHF CB Antenna combines reliable communication performance with distinctive pink styling through a detachable fiberglass pole design and integrated heavy-duty barrel spring base. This 665mm antenna system (including spring) provides the flexibility needed to survive offroad impacts while maintaining consistent signal transmission. The fiberglass construction withstands branch strikes, car wash encounters, and low-clearance obstacles without permanent damage, while the barrel spring base absorbs impacts that would break fixed-mount antennas. The detachable pole design simplifies replacement after damage and enables quick removal for secure storage or height-restricted areas. Complete with 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor, the ANU856PNK provides everything needed for installation on bull bars, roof racks, or rear vehicle sections on 4WD vehicles and touring setups. The pink pole with black powder-coated base creates a distinctive appearance for vehicle customization or visibility enhancement while protecting against corrosion in Australian conditions. Whether coordinating convoy travel, maintaining worksite communications, or ensuring emergency contact capability in remote areas, this antenna balances durability with practical 3dBi gain performance and unique styling. Key Specifications Antenna Gain: 3dBi Total Length: 665mm (including spring base) Pole Colour: Pink Base Finish: Black powder coating Construction: Fiberglass pole with detachable design Base Type: Heavy-duty barrel spring Coaxial Cable: 4.5m low-loss cable included Connector: Pre-terminated FME connector with PL259 adaptor Mounting: Suitable for bull bars, roof racks, rear sections Warranty: 3 years Features & Benefits Detachable Pink Fiberglass Pole — Remove the antenna pole for secure storage, car wash protection, or low-clearance situations, then reinstall quickly while maintaining distinctive pink styling. Heavy-Duty Barrel Spring Base — Absorbs impacts from branches, obstacles, and offroad terrain, allowing the antenna to flex and return without damage that would break rigid-mount alternatives. 3dBi Gain Performance — Provides balanced transmission and reception characteristics suitable for convoy communications, worksite coordination, and general touring applications across typical UHF CB ranges. 665mm Overall Length — Compact profile reduces clearance concerns in garages, car washes, and low-hanging obstacles while maintaining effective signal propagation for practical communication distances. Distinctive Pink Styling — Unique pink pole colour provides vehicle customization option, enhanced visibility for convoy identification, or coordination with pink-themed vehicle accessories. Fiberglass Construction — Non-conductive fiberglass housing protects internal elements while providing flexibility and impact resistance superior to metal whip designs in demanding conditions. Complete Installation Kit — Includes 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor for immediate installation without sourcing additional components. Versatile Mounting Options — Suitable for bull bar, roof rack, or rear vehicle mounting positions, providing flexibility for different vehicle configurations and communication requirements. Black Powder Coat Base — Durable coating on spring base protects against UV degradation, salt corrosion, and chemical exposure while contrasting with the pink pole for visual definition. Three-Year Warranty — Extended warranty coverage reflects manufacturer confidence in durability and construction quality for demanding Australian applications. Technical Specs Model: ANU856PNK Antenna Type: UHF CB whip antenna Gain: 3dBi Total Length: 665mm (including spring base) Pole Colour: Pink Pole Construction: Detachable fiberglass Base Finish: Black powder coating Base Type: Heavy-duty barrel spring Mounting Locations: Bull bars, roof racks, rear sections Coaxial Cable Length: 4.5m Cable Type: Low-loss coaxial Connector Type: Pre-terminated FME connector Adaptor Included: PL259 adaptor Warranty Period: 3 years Frequently Asked Questions Can I replace just the pink pole if it gets damaged? The fiberglass pole is detachable. Verify replacement pole availability with supplier, as the pink colour may require specific replacement parts to maintain colour-matched appearance. Will the spring base protect the antenna from all impacts? The heavy-duty barrel spring absorbs most typical offroad impacts from branches and obstacles, but extreme forces or direct strikes may still cause damage. The spring significantly improves survival compared to rigid mounts. What mounting position works best for this antenna? Bull bar mounting provides forward positioning for good signal patterns, roof rack mounting offers height advantages, and rear mounting suits specific vehicle configurations. Choose based on clearance requirements and communication needs. Is the entire antenna pink or just the pole? The detachable fiberglass pole is pink, while the barrel spring base features black powder coating, creating a two-tone appearance. How does 3dBi gain compare to higher-gain antennas? 3dBi antennas provide balanced omnidirectional performance suitable for general touring and convoy use. Higher-gain antennas (6dBi, 9dBi) offer increased range but with narrower vertical radiation patterns that may miss signals on undulating terrain. Compatible With Bull bar UHF antenna mounts and brackets Roof rack antenna mounting systems Rear vehicle antenna brackets Oricom UHF CB radios and communication systems 4WD vehicles, utes, and touring setups Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Durable black fiberglass antenna with heavy-duty spring base for reliable 4WD communications The Oricom ANU856 3dBi UHF CB Antenna delivers reliable communication performance through a detachable fiberglass pole design with integrated heavy-duty barrel spring base. This 665mm antenna system (including spring) provides the flexibility needed to survive offroad impacts while maintaining consistent signal transmission. The fiberglass construction withstands branch strikes, car wash encounters, and low-clearance obstacles without permanent damage, while the barrel spring base absorbs impacts that would break fixed-mount antennas. The detachable pole design simplifies replacement after damage and enables quick removal for secure storage or height-restricted areas. Complete with 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor, the ANU856 provides everything needed for installation on bull bars, roof racks, or rear vehicle sections on 4WD vehicles and touring setups. The black powder-coated finish integrates cleanly with modern vehicle aesthetics while protecting against corrosion in Australian conditions. Whether coordinating convoy travel, maintaining worksite communications, or ensuring emergency contact capability in remote areas, this antenna balances durability with practical 3dBi gain performance. Key Specifications Antenna Gain: 3dBi Total Length: 665mm (including spring base) Finish: Black powder coating Construction: Fiberglass pole with detachable design Base Type: Heavy-duty barrel spring Coaxial Cable: 4.5m low-loss cable included Connector: Pre-terminated FME connector with PL259 adaptor Mounting: Suitable for bull bars, roof racks, rear sections Warranty: 3 years Features & Benefits Detachable Fiberglass Pole — Remove the antenna pole for secure storage, car wash protection, or low-clearance situations, then reinstall quickly without tools or technical knowledge. Heavy-Duty Barrel Spring Base — Absorbs impacts from branches, obstacles, and offroad terrain, allowing the antenna to flex and return without damage that would break rigid-mount alternatives. 3dBi Gain Performance — Provides balanced transmission and reception characteristics suitable for convoy communications, worksite coordination, and general touring applications across typical UHF CB ranges. 665mm Overall Length — Compact profile reduces clearance concerns in garages, car washes, and low-hanging obstacles while maintaining effective signal propagation for practical communication distances. Fiberglass Construction — Non-conductive fiberglass housing protects internal elements while providing flexibility and impact resistance superior to metal whip designs in demanding conditions. Complete Installation Kit — Includes 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor for immediate installation without sourcing additional components. Versatile Mounting Options — Suitable for bull bar, roof rack, or rear vehicle mounting positions, providing flexibility for different vehicle configurations and communication requirements. Black Powder Coat Finish — Durable coating protects against UV degradation, salt corrosion, and chemical exposure while matching modern vehicle aesthetics for clean integration. Three-Year Warranty — Extended warranty coverage reflects manufacturer confidence in durability and construction quality for demanding Australian applications. Technical Specs Model: ANU856 Antenna Type: UHF CB whip antenna Gain: 3dBi Total Length: 665mm (including spring base) Pole Construction: Detachable fiberglass Surface Finish: Black powder coating Base Type: Heavy-duty barrel spring Mounting Locations: Bull bars, roof racks, rear sections Coaxial Cable Length: 4.5m Cable Type: Low-loss coaxial Connector Type: Pre-terminated FME connector Adaptor Included: PL259 adaptor Warranty Period: 3 years Frequently Asked Questions Can I replace just the pole if it gets damaged? Yes, the fiberglass pole is detachable. Replacement poles are available separately, allowing pole replacement without purchasing a complete antenna system. Will the spring base protect the antenna from all impacts? The heavy-duty barrel spring absorbs most typical offroad impacts from branches and obstacles, but extreme forces or direct strikes may still cause damage. The spring significantly improves survival compared to rigid mounts. What mounting position works best for this antenna? Bull bar mounting provides forward positioning for good signal patterns, roof rack mounting offers height advantages, and rear mounting suits specific vehicle configurations. Choose based on clearance requirements and communication needs. What's the difference between the ANU856 and ANU916? The ANU856 is 665mm long and suited for bull bar, roof rack, or rear mounting, while the ANU916 is 640mm long and designed for bonnet mounting. Both offer 3dBi gain and detachable poles. How does 3dBi gain compare to higher-gain antennas? 3dBi antennas provide balanced omnidirectional performance suitable for general touring and convoy use. Higher-gain antennas (6dBi, 9dBi) offer increased range but with narrower vertical radiation patterns that may miss signals on undulating terrain. Compatible With Bull bar UHF antenna mounts and brackets Roof rack antenna mounting systems Rear vehicle antenna brackets Oricom UHF CB radios and communication systems 4WD vehicles, utes, and touring setups ANU856PNK (pink pole version of this antenna) Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Versatile dual-gain antenna system adapts to terrain for optimized communication performance The Oricom ANU806AT All-Terrain UHF CB Antenna Pack delivers exceptional versatility through a two-in-one design that adapts to varying terrain conditions. This innovative system provides a 3dBi gain antenna with spring base (665mm) for built-up or mountainous areas where shorter antennas and omnidirectional patterns excel, plus a swappable 600mm fiberglass pole that converts the system to 6.5dBi gain (1040mm total) for flat terrain where increased range and focused radiation patterns maximize distance communications. The heavy-duty barrel spring base absorbs offroad impacts while the detachable pole design enables quick configuration changes without tools. Switch between 3dBi mode for urban convoy navigation, mountain tracks, or tree-lined trails, then swap to 6.5dBi mode for desert crossings, salt lake traverses, or open plains touring. Complete with 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor, the ANU806AT provides everything needed for adaptable installation across varying Australian landscapes. The black powder-coated finish protects against corrosion while integrating cleanly with modern vehicle aesthetics. Whether navigating diverse terrain on multi-day expeditions or optimizing communications for specific regional conditions, this dual-gain system eliminates the need to purchase separate antennas for different environments. Key Specifications Dual-Gain System: 3dBi (short pole) / 6.5dBi (with extension pole) 3dBi Configuration: 665mm total length (with spring base) 6.5dBi Configuration: 1040mm total length (with 600mm extension pole) Construction: Fiberglass poles with detachable design Base Type: Heavy-duty barrel spring Coaxial Cable: 4.5m low-loss cable included Connector: Pre-terminated FME connector with PL259 adaptor Finish: Black powder coating Application: Built-up/mountainous (3dBi), flat terrain (6.5dBi) Warranty: 3 years Features & Benefits Dual-Gain Versatility — Switch between 3dBi and 6.5dBi configurations to match terrain conditions, optimizing communication performance without purchasing separate antenna systems for different environments. 3dBi Mode for Complex Terrain — Shorter 665mm configuration provides omnidirectional pattern ideal for built-up areas, mountainous regions, forested tracks, and undulating terrain where vertical signal coverage matters. 6.5dBi Mode for Open Country — Extended 1040mm configuration focuses signal energy horizontally for increased range across flat terrain including deserts, plains, salt lakes, and coastal flats. Swappable Pole Design — Tool-free pole exchange enables quick configuration changes at camp, allowing antenna optimization as terrain changes during multi-day expeditions or regional travel. Heavy-Duty Barrel Spring Base — Absorbs impacts from branches, obstacles, and offroad terrain in both configurations, protecting the antenna system under demanding conditions. Complete Dual-Pole Package — Includes both 3dBi short pole and 600mm extension pole, eliminating the need to purchase additional antennas or components for terrain-specific optimization. Fiberglass Construction — Non-conductive fiberglass poles provide flexibility and impact resistance while maintaining signal integrity across both gain configurations. Extended Range Capability — 6.5dBi mode significantly increases communication distances on open terrain, critical for remote area touring where station spacing exceeds typical 3dBi range. Compact Storage Option — 3dBi configuration reduces overall height for garage clearance, car wash access, or urban driving when extended range isn't required. Three-Year Warranty — Extended warranty coverage protects both antenna poles and base components, reflecting manufacturer confidence in all-terrain durability. Technical Specs Model: ANU806AT Antenna Type: Dual-gain UHF CB whip antenna system Low Gain Configuration: 3dBi High Gain Configuration: 6.5dBi 3dBi Total Length: 665mm (with spring base) 6.5dBi Total Length: 1040mm (with 600mm extension pole + spring base) Pole Construction: Detachable fiberglass (dual poles included) Extension Pole Length: 600mm Surface Finish: Black powder coating Base Type: Heavy-duty barrel spring Coaxial Cable Length: 4.5m Cable Type: Low-loss coaxial Connector Type: Pre-terminated FME connector Adaptor Included: PL259 adaptor Warranty Period: 3 years Frequently Asked Questions When should I use 3dBi mode versus 6.5dBi mode? Use 3dBi (short pole) in built-up areas, mountains, forests, or undulating terrain where omnidirectional coverage matters. Use 6.5dBi (extended pole) on flat open terrain like deserts, plains, or coastal areas where increased horizontal range is beneficial. Can I swap between poles while on the trail? Yes, the detachable pole design allows tool-free swapping between configurations at camp or roadside stops, enabling antenna optimization as terrain changes during your journey. Will the 6.5dBi mode work poorly in mountains? Higher-gain antennas focus signal energy horizontally with narrower vertical patterns, which can miss stations on steep grades or undulating terrain. The 3dBi mode provides better coverage in these conditions. Does the package include both poles? Yes, the ANU806AT includes the complete system: barrel spring base, 3dBi short pole, 600mm extension pole for 6.5dBi mode, 4.5m cable, and all connectors. What mounting hardware do I need? The antenna includes the barrel spring base but requires a vehicle-specific UHF antenna mount or bracket (sold separately) to attach the system to your bull bar, roof rack, or other mounting location. Compatible With Bull bar UHF antenna mounts and brackets Roof rack antenna mounting systems Rear vehicle antenna brackets Oricom UHF CB radios and communication systems Multi-terrain touring and expedition setups Desert, mountain, and coastal touring applications Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

High-gain pink antenna for extended range communication across flat terrain The Oricom ANU806PNK 6.5dBi UHF CB Antenna delivers extended communication range through higher gain and distinctive pink styling. This 1140mm antenna system (including spring base) focuses signal energy horizontally for increased distance on flat terrain including deserts, plains, salt lakes, and coastal areas. The 6.5dBi gain specification provides significantly greater range than standard 3dBi antennas when line-of-sight conditions exist, making this antenna ideal for open country touring, convoy coordination across long distances, and remote area communications. The detachable pink fiberglass pole combines extended range capability with distinctive styling for vehicle customization or convoy visibility. The heavy-duty barrel spring base absorbs offroad impacts despite the longer antenna length, while the detachable design enables quick removal for garage clearance, car wash protection, or secure storage. Complete with 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor, the ANU806PNK provides everything needed for bull bar or rear mounting on 4WD vehicles and touring setups. The pink pole with black powder-coated base creates a distinctive appearance while protecting against corrosion in Australian conditions. Whether crossing the Nullarbor, touring Cape York, or coordinating multi-vehicle expeditions across open terrain, this high-gain antenna maximizes communication distances when geography permits. Key Specifications Antenna Gain: 6.5dBi (high gain for extended range) Total Length: 1140mm (including spring base) Pole Colour: Pink Base Finish: Black powder coating Construction: Detachable fiberglass pole Base Type: Heavy-duty barrel spring Coaxial Cable: 4.5m low-loss cable included Connector: Pre-terminated FME connector with PL259 adaptor Mounting: Bull bar and rear mounting preferred Warranty: 3 years Features & Benefits 6.5dBi High Gain — Extended range performance on flat terrain significantly increases communication distances compared to 3dBi antennas, critical for desert crossings, plains touring, and convoy coordination across long distances. Detachable Pink Fiberglass Pole — Remove antenna for garage clearance, car wash access, or secure storage, then reinstall quickly while maintaining distinctive pink styling for vehicle customization or convoy identification. 1140mm Extended Length — Longer antenna maximizes signal propagation on open terrain where line-of-sight conditions allow the focused radiation pattern to deliver superior range performance. Heavy-Duty Barrel Spring Base — Absorbs impacts from obstacles despite extended length, protecting the antenna system under demanding offroad conditions while maintaining flexibility. Distinctive Pink Styling — Unique pink pole colour provides vehicle customization option, enhanced visibility for convoy operations, or coordination with pink-themed vehicle accessories and communication gear. Focused Radiation Pattern — Higher gain concentrates signal energy horizontally, increasing range on flat terrain while trading vertical coverage for distance—ideal for open country touring. Fiberglass Construction — Non-conductive fiberglass housing protects internal elements while providing impact resistance and flexibility superior to metal designs despite extended length. Complete Installation Kit — Includes 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor for immediate installation without sourcing additional components. Bull Bar and Rear Mounting — Optimized for forward or rear vehicle mounting positions that provide clearance for the extended 1140mm length without interference with vehicle operation. Three-Year Warranty — Extended warranty coverage reflects manufacturer confidence in high-gain antenna durability for demanding Australian touring applications. Technical Specs Model: ANU806PNK Antenna Type: High-gain UHF CB whip antenna Gain: 6.5dBi Total Length: 1140mm (including spring base) Pole Colour: Pink Pole Construction: Detachable fiberglass Base Finish: Black powder coating Base Type: Heavy-duty barrel spring Mounting Preference: Bull bar, rear sections Coaxial Cable Length: 4.5m Cable Type: Low-loss coaxial Connector Type: Pre-terminated FME connector Adaptor Included: PL259 adaptor Warranty Period: 3 years Frequently Asked Questions When should I use a 6.5dBi antenna versus a 3dBi antenna? Use 6.5dBi antennas on flat, open terrain like deserts, plains, or coastal areas where extended range matters. Use 3dBi antennas in built-up areas, mountains, or undulating terrain where omnidirectional coverage is more important than maximum distance. Will this antenna work poorly in mountainous terrain? Yes, higher-gain antennas focus signal energy horizontally with narrower vertical patterns, which can miss stations on steep grades or undulating terrain. Choose 3dBi antennas for mountain or hilly conditions. Can I replace just the pink pole if damaged? The fiberglass pole is detachable. Verify replacement pole availability with supplier, as the pink colour and 6.5dBi gain specification may require specific replacement parts. Why is bull bar or rear mounting preferred? The extended 1140mm length requires mounting positions with adequate clearance to avoid interference with vehicle doors, roof access, or operational clearances during normal use. Is the entire antenna pink or just the pole? The detachable fiberglass pole is pink, while the barrel spring base features black powder coating, creating a two-tone appearance similar to the ANU856PNK model. Compatible With Bull bar UHF antenna mounts and brackets Rear vehicle antenna mounting systems Oricom UHF CB radios and communication systems Flat terrain touring and desert expedition setups Open country convoy coordination applications Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

High-gain ground-independent antenna with elevated feed for versatile bull bar mounting The Oricom ANU236 6.5dBi UHF CB Antenna delivers extended communication range through ground-independent design with elevated feed technology. This 960mm antenna system eliminates the need for vehicle ground plane dependency, providing consistent performance across various mounting positions and vehicle types. The 6.5dBi gain specification focuses signal energy horizontally for increased distance on flat terrain including deserts, plains, salt lakes, and coastal areas. The elevated feed design optimizes antenna performance regardless of mounting surface conductivity, making this antenna suitable for bull bar installations on steel, aluminium, or composite materials. The heavy-duty barrel spring base absorbs offroad impacts while the black powder-coated finish protects against corrosion in Australian conditions. The antenna features a 5/16 UNC threaded whip (not the spring base) for secure attachment and potential replacement options. Complete with 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor, the ANU236 provides everything needed except the vehicle-specific mounting bracket. Whether touring open country, coordinating convoys across long distances, or maintaining communications in remote areas, this ground-independent design delivers consistent high-gain performance across diverse vehicle platforms. Key Specifications Antenna Gain: 6.5dBi (high gain for extended range) Total Length: 960mm Design: Ground-independent with elevated feed Whip Thread: 5/16 UNC (whip only, not spring base) Base Type: Heavy-duty barrel spring Finish: Black powder coating Coaxial Cable: 4.5m low-loss cable included Connector: Pre-terminated FME connector with PL259 adaptor Mounting: Bull bar (specific bracket required, sold separately) Warranty: 3 years Features & Benefits Ground-Independent Design — Elevated feed eliminates dependency on vehicle ground plane, providing consistent performance across steel, aluminium, or composite bull bars without tuning or performance variations. 6.5dBi High Gain — Extended range performance on flat terrain significantly increases communication distances compared to 3dBi antennas, critical for desert crossings, plains touring, and convoy coordination. Elevated Feed Technology — Optimized feed point positioning ensures proper antenna operation regardless of mounting surface material or conductivity, simplifying installation across diverse vehicle platforms. 960mm Length — Mid-length high-gain design balances extended range capability with practical clearance considerations, shorter than 1140mm alternatives while maintaining 6.5dBi performance. Heavy-Duty Barrel Spring Base — Absorbs impacts from obstacles and offroad terrain, protecting the antenna system under demanding conditions while maintaining flexibility for branch strikes. 5/16 UNC Threaded Whip — Standard thread specification enables secure attachment and facilitates potential whip replacement options using compatible aftermarket or replacement components. Bull Bar Mounting Versatility — Ground-independent design suits various bull bar configurations and materials, with multiple mounting options available through appropriate brackets. Complete Installation Kit — Includes 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor for immediate installation once mounting bracket is sourced. Black Powder Coat Finish — Durable coating protects against UV degradation, salt corrosion, and chemical exposure while matching modern vehicle aesthetics. Three-Year Warranty — Extended warranty coverage reflects manufacturer confidence in ground-independent antenna durability for demanding Australian touring applications. Technical Specs Model: ANU236 Antenna Type: Ground-independent high-gain UHF CB antenna Gain: 6.5dBi Total Length: 960mm Feed Design: Elevated feed (ground-independent) Whip Thread Size: 5/16 UNC (whip only) Spring Base: Heavy-duty barrel spring (separate thread specification) Surface Finish: Black powder coating Mounting Method: Bull bar (bracket required, sold separately) Coaxial Cable Length: 4.5m Cable Type: Low-loss coaxial Connector Type: Pre-terminated FME connector Adaptor Included: PL259 adaptor Warranty Period: 3 years Frequently Asked Questions What does "ground-independent" mean? Ground-independent antennas don't rely on the vehicle body as part of the antenna system. The elevated feed design ensures consistent performance regardless of mounting surface material (steel, aluminium, composite) or electrical conductivity. What mounting bracket do I need? The ANU236 requires a vehicle-specific bull bar mounting bracket (sold separately). Bracket selection depends on your bull bar type, diameter, and preferred mounting position. Consult mounting bracket specifications for compatibility. Can I use this antenna on a roof rack instead of bull bar? The antenna is designed and optimized for bull bar mounting. While ground-independent design provides flexibility, verify clearance and mounting bracket availability before considering alternative mounting positions. Why is this antenna shorter than the ANU806PNK but still 6.5dBi? The elevated feed design achieves 6.5dBi gain in a more compact 960mm length compared to conventional 1140mm designs, providing extended range with reduced clearance requirements. What's the thread size for the spring base? The 5/16 UNC thread specification applies to the whip only, not the spring base. The spring base has a separate thread specification for mounting bracket attachment. Verify bracket compatibility before purchase. Compatible With Bull bar UHF antenna mounting brackets (required, sold separately) Oricom UHF CB radios and communication systems Steel, aluminium, and composite bull bar configurations Flat terrain touring and desert expedition setups Open country convoy coordination applications Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Ultra-compact ground-independent high-gain antenna with elevated feed technology The Oricom ANU206 6.5dBi UHF CB Antenna delivers extended communication range through ground-independent design with elevated feed in the most compact high-gain package available. At just 830mm total length, this antenna achieves 6.5dBi performance without requiring vehicle ground plane dependency, providing consistent operation across various mounting positions and vehicle types. The ground-independent design eliminates performance variations caused by different mounting surface materials, while the elevated feed optimizes radiation characteristics for maximum efficiency from the compact physical size. The spring base absorbs offroad impacts, protecting the antenna during demanding use. Complete with 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor, the ANU206 provides everything needed for installation. The black powder-coated finish protects against corrosion in Australian conditions. Whether navigating open country with height restrictions, coordinating convoys across flat terrain, or maintaining communications where garage clearance matters, this ultra-compact ground-independent antenna delivers extended range without excessive height penalties or ground plane dependencies. Key Specifications Antenna Gain: 6.5dBi (high gain for extended range) Total Length: 830mm (most compact 6.5dBi in Oricom range) Design: Ground-independent with elevated feed Base Type: Spring base Finish: Black powder coating Coaxial Cable: 4.5m low-loss cable included Connector: Pre-terminated FME connector with PL259 adaptor Warranty: Not specified Features & Benefits Ultra-Compact 6.5dBi Performance — At 830mm, this is the shortest 6.5dBi antenna in the Oricom lineup, delivering extended range with minimal height requirements for maximum versatility. Ground-Independent Design — Eliminates dependency on vehicle ground plane, providing consistent performance across steel, aluminium, or composite mounting surfaces without tuning or performance variations. Elevated Feed Technology — Optimized feed point positioning maximizes antenna efficiency and radiation characteristics, achieving high gain from the compact physical length. Extended Range on Flat Terrain — 6.5dBi gain focuses signal energy horizontally for increased communication distances on deserts, plains, salt lakes, and coastal areas. Spring Base Protection — Absorbs impacts from obstacles and offroad terrain despite compact length, protecting the antenna system during demanding use. Minimal Clearance Requirements — 830mm length eliminates garage clearance concerns, car wash restrictions, and low-hanging obstacle risks while maintaining high-gain performance. Universal Mounting Flexibility — Ground-independent design suits various mounting positions and vehicle types without requiring specific ground plane configurations. Complete Installation Kit — Includes 4.5-metre low-loss coaxial cable, pre-terminated FME connector, and PL259 adaptor for immediate installation. Black Powder Coat Finish — Durable coating protects against UV degradation, salt corrosion, and chemical exposure in Australian touring conditions. Technical Specs Model: ANU206 Antenna Type: Ground-independent high-gain UHF CB antenna Gain: 6.5dBi Total Length: 830mm Feed Design: Elevated feed (ground-independent) Base Type: Spring base Surface Finish: Black powder coating Coaxial Cable Length: 4.5m Cable Type: Low-loss coaxial Connector Type: Pre-terminated FME connector Adaptor Included: PL259 adaptor Warranty Period: Not specified Frequently Asked Questions What does "ground-independent" mean for this antenna? Ground-independent antennas don't rely on the vehicle body as part of the antenna system. The elevated feed design ensures consistent performance regardless of mounting surface material or electrical conductivity. How does this antenna achieve 6.5dBi in only 830mm? The combination of ground-independent design and elevated feed technology optimizes the antenna's radiation characteristics, allowing high-gain performance in the most compact package in Oricom's 6.5dBi range. What mounting bracket do I need? The ANU206 requires a vehicle-specific mounting bracket (sold separately). Bracket selection depends on your mounting location and vehicle configuration. Verify bracket compatibility before purchase. When should I choose the ANU206 over other 6.5dBi antennas? Choose the ANU206 when you need 6.5dBi extended range with minimal height (830mm) and mounting flexibility across different surface materials. Ideal for clearance-restricted applications requiring ground-independent operation. Will this antenna work in mountainous terrain? Like all 6.5dBi antennas, the ANU206 focuses signal energy horizontally, which can miss stations on steep grades. Use 3dBi antennas for mountainous terrain where omnidirectional coverage matters more than maximum range. Compatible With UHF antenna mounting brackets (required, sold separately) Oricom UHF CB radios and communication systems Various mounting positions (bull bar, roof rack, rear) Steel, aluminium, and composite mounting surfaces Vehicles with tight clearance restrictions Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less