Aerpro SWC Harnesses Connect OEM Steering Wheel Controls to Aftermarket Headunits
Steering Wheel Control Harness (SWC) adaptors allow use of a vehicles factory steering wheel audio controls with an aftermarket source unit by converting the commands to a code that an aftermarket head unit can recognise.
Once you have your SWC harness selected to suit your specific vehicle, you then need to to select a patch lead based on the head unit brand and its connector. The CHSZ1C Steering Wheel Control harness suits Suzuki models without phone buttons. Harness is not compatible with vehicles fitted with factory Rockford Fosgate systems.
Aerpro CHSZ1C Features:
Plug and play
Retains the factory Steering wheel controls
Aerpro CHSZ1C Specifications:
Patch Lead Type: Type C
Phone button compatibility: No
For vehicles without phone buttons on steering wheel
Not compatible with factory Rockford Fosgate systems.
VSS (Pink): Yes
Works with Aerpro Secondary ISO Harnesses with Patch Leads
Makes for easy D.I.Y. installation
Vehicles Known to Work with this Product:
Suzuki Grand Vitara 2005-2013
Suzuki Kizashi 2010-2014
Suzuki Swift 2011-2017
Suzuki Swift 2005-2010
Suzuki SX4 2007-2013
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Designed to Connect Directly to the Existing Wiring in the Vehicle with Ease!
Steering Wheel Control Interface (SWC)The Aerpro CHLVTVXC allows you to upgrade to an aftermarket headunit whilst maintaining the use of your factory steering wheel controls. Engineered to suit Holden Calais (VT), Commodore (VT/VX/VU), Monaro (V2I) and Statesman (WH) models with premium maestro OEM systems.
The steering wheel control interface includes a harness that is fitted with a vehicle-specific plug designed to connect directly to the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required. Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects the aftermarket headunit and the Aerpro Steering Wheel Control Interface.
Please Note:
Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (Sold Separately).
The aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
Black wire needs to be connected to Black/Yellow wire in the vehicle, White wire needs to be connected to Brown wire in the vehicle (Located in 12 Pin Plug).
Aerpro CHLVTVXC Features:
Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
Fitted with a vehicle-specific plug, no cutting of wires is required
Recommended to be installed with an Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead (Sold Separately)
Requires SWC patch lead to provide compatibility with the aftermarket headunit (Sold Separately)
Aerpro CHLVTVXC Specifications:
Interface Type: Analogue
Patch Lead Type: C
Phone Button Compatibility: No
Voice Assistant Button Support: No
Outputs:Reverse Trigger: NoPark Brake: NoSpeed Pulse: NoIllumination: NoAmp Remote: NoTelephone Mute: No
OEM Amplified System: No
Packaging Type: Side Blister
Weight: 0.10kg
Vehicle Compatibility:
Holden Calais (1997 - 1999 VT)
Holden Commodore (2000 - 2002 VX Series I, II, VU)
Holden Monaro (2001 - 2002 V2)
Holden Statesman (1999 - 2003 WH Series I, II)
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Simple 'Plug-N-Play' Installation of Your Aftermarket Headunit!APP8 Secondary ISO Harness (16 Pin Connector)Suitable for various JVC Aftermarket Headunits with 16 pin connectors, APP8JVC5 is a Secondary ISO Harness that converts the aftermarket headunit plug into a universal double ISO connector system. For a simple plug and play installation of your aftermarket headunit into your vehicle, pair this harness with an Aerpro Vehicle Specific Harness; APP Series Primary ISO Harness, Steering Wheel Control Interface or Infodapter and the two looms will connect together via the ISO connector system.Please Note: Harnesses vary between headunit models, to find the correct harness for your headunit, use the Aerpro Headunit Selector. Depending on the vehicle and aftermarket headunit, installation may not be completely plug and play, a small amount of hard-wiring may still be required to complete the installation. Includes SWC OEM Remote Input. DDX, DMX, DNX, KW-V have on-board SWC interface. All others have single wire for external interface. Features: 16 pin plug designed specifically to suit various JVC Aftermarket Headunits Includes OEM SWC remote input Converts the aftermarket headunit plug into a universal double ISO connector system Provides a Plug and Play installation solution when paired with an Aerpro Vehicle Specific Harness APP Series Primary ISO Harness, Steering Wheel Control Interface or Infodapter (Some hard-wiring may still be required) Secure Clips on ISO connectors and headunit plug to ensure secure and long lasting connection Specifications: Headunit Brand Compatibility: Various JVC Headunits Headunit Plug Type: 16 PIN (With 15 Wires) Packaging Type: Side Blister Weight: 0.07kg
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Designed to Connect Directly to the Existing Wiring in the Vehicle With Ease!
Steering Wheel Control Interface (SWC)The Aerpro CHHO6C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket headunit whilst maintaining the use of your factory steering wheel controls. Engineered to suit various Honda vehicles, the steering wheel control interface includes a harness that is fitted with a vehicle-specific plug designed to connect directly to the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required.
Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects the aftermarket headunit and the Aerpro Steering Wheel Control Interface. The interface provides park brake, speed pulse, and amp remote outputs.
Please Note:
Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (Sold Separately).
The aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
Features:
Allows you to upgrade to an aftermarket headunit whilst maintaining the use of your factory steering wheel controls.
Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road.
Maintains the original features of the vehicle such as date, time, and temperature display. (See Notes)
Provides output feeds for the parking brake, speed pulse, and amp remote.
Fitted with a vehicle-specific plug, no cutting of wires is required.
Recommended to be installed with an Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead. (Sold Separately)
Requires SWC patch lead to provide compatibility with the aftermarket headunit. (Sold Separately)
Specifications:
Interface Type: Analogue
Patch Lead Type: C
Phone Button Compatibility: No
Voice Assistant Button Support: No
Outputs:Reverse Trigger: NoPark Brake: Yes (Green)Speed Pulse: Yes (Pink)Illumination: NoAmp Remote: Yes (Blue)Telephone Mute: No
Other Retention: N/A
Packaging Type: Side Blister
Weight: 0.05kg
Vehicle Compatibility:
Honda Accord (2008 - 2012)
Honda Accord (2013 - 2015)
Honda Accord Euro (2008 - 2015)
Honda City (2009 - 2012)
Honda CR-Z (2010 - 2016)
Honda Insight (2010 - 2013)
Honda Jazz (Fit) (2008 - 2013 GE)
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Designed to Connect Directly to the Existing Wiring in the Vehicle With Ease!
Steering Wheel Control Interface (SWC)The Aerpro CHMZ14C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket headunit whilst maintaining the use of your factory steering wheel controls. Engineered to suit Mazda BT-50 GT XR (2015-2017) models, the steering wheel control interface includes a harness that is fitted with a vehicle-specific plug designed to connect directly to the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required.Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects the aftermarket headunit and the Aerpro Steering Wheel Control Interface. This interface also provides a reverse trigger output.
Please Note:
Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (Sold Separately).
The aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
Features:
Allows you to upgrade to an aftermarket headunit whilst maintaining the use of your factory steering wheel controls.
Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road.
Provides an output feed for the reverse trigger.
Fitted with a vehicle-specific plug, no cutting of wires is required.
Recommended to be installed with an Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead (Sold Separately)
Requires SWC patch lead to provide compatibility with the aftermarket headunit (Sold Separately)
Specifications:
Interface Type: Analogue
Patch Lead Type: C
Phone Button Compatibility: No
Voice Assistant Button Support: No
Outputs:Reverse Trigger: Yes (Purple/White)Park Brake: NoSpeed Pulse: NoIllumination: NoAmp Remote: NoTelephone Mute: NO
Other Retention:OEM Amplified System: No
Vehicle Compatibility:
Mazda BT-50 GT, XTR (2015 - 2017)
Mazda BT-50 (2018 - 2019)
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
"Get Connected" With Our Range of Cables, Antennas & Adaptors!
Replacement OEM HarnessThe Aerpro 711783H Replacement OEM Harness suits Holden Commodore VR and VS vehicles. It is ideal for replacing the factory stereo plug in the vehicle if it has previously been removed or damaged. This harness will also enable the installation of the factory headunit into another vehicle.
Please Note: Harnesses vary between vehicles, please use the Aerpro Vehicle Selector to identify the correct harness for your application.
Features:
Matches the factory head unit plug in the vehicle
Allows for the replacement of a missing or damaged factory harness
Can be used to install the factory head unit of one car into another
Compatible with Holden VR and VS model vehicles
Specifications:
Plug Type: 1 x 13 Pin
Installation Type: Bare Wire (Requires Soldering)
Vehicle Compatibility: Holden Commodore VR/VS
Packaging Type: Side Blister
Weight: 0.07kg
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Speaker Line to Male RCA Adapter OFC, Platinum Plated Ends, Split Center Pin. Connects Factory OEM Source Units to Amplifiers Without RCA Outputs.
Product Overview
The Rockford Fosgate RFI2SW is a high-level speaker wire to male RCA plug adapter the male-output counterpart to the RFIF2SW female adapter. Where the RFIF2SW outputs female RCA jacks (requiring a separate RCA cable to the amplifier), the RFI2SW outputs male RCA plugs that connect directly into the amplifier's female RCA inputs without an intermediate cable. OFC conductors, platinum-plated ends, and a split center pin for secure plug engagement.
Key Specifications
Part number: RFI2SW
Type: High-level (speaker line) to low-level (RCA) adapter
Input: Speaker-level signal from factory head unit speaker outputs
Output: Male RCA plugs ✓
Conductor: OFC (Oxygen-Free Copper) ✓
End plating: Platinum ✓
Center pin: Split for secure connection ✓
Channels: Not confirmed — confirm from official product page
Input impedance: Not confirmed — confirm with Rockford Fosgate
Wire length: Not confirmed — confirm with Rockford Fosgate
Warranty: Not confirmed — confirm with Rockford Fosgate
Features & Benefits
Male RCA Plug Output — Direct Amplifier Connection The male RCA plugs on the RFI2SW plug directly into the amplifier's female RCA input jacks — eliminating the need for a separate RCA signal cable between the adapter and the amplifier. This is the key distinction from the RFIF2SW (female output), which requires an RCA cable between adapter and amplifier.
OFC Conductors + Platinum Plated Ends OFC resists oxidation at both the speaker wire connection and RCA plug ends for long-term low-resistance signal transfer.
Split Center Pin The same split center pin design used throughout the Rockford Fosgate RFI and RFIT RCA cable range — six-point spring contact for a secure, vibration-resistant connection at the amplifier's RCA input.
Factory Head Unit to Amplifier — Economic Solution Connects a factory OEM source unit (without RCA outputs) to an amplifier using the existing speaker wire outputs.
Technical Specs
Specification
Detail
Brand
Rockford Fosgate
Part Number
RFI2SW
Type
High-Level Speaker to RCA Adapter
Input Signal
Speaker-level (high level) ✓
Output
Male RCA plugs ✓
Conductor
OFC ✓
End Plating
Platinum ✓
Center Pin
Split ✓
Channels
Not confirmed
Input Impedance
Not confirmed
Wire Length
Not confirmed
Warranty
Not confirmed
Compatible With / Goes Well With
Suitable for:
Factory (OEM) head units without RCA preout jacks
Direct connection to amplifiers with female RCA inputs (no separate RCA cable required)
Compatibility caution: Same source unit damage risk as RFIF2SW. Always consult the installation instructions before connecting.
Pairs with:
Any amplifier with female RCA inputs — plugs directly in
Rockford Fosgate TM750X1bd, TM1000X5ad, or other amplifiers with RCA inputs
Frequently Asked Questions
What is the difference between the RFI2SW and the RFIF2SW?
Both are high-level speaker to RCA signal adapters with identical OFC and platinum construction. The RFI2SW has male RCA plugs — it connects directly into the amplifier's female RCA input jacks without requiring a separate RCA cable. The RFIF2SW has female RCA jacks — it requires a separate RCA cable between the adapter and the amplifier.
Can the RFI2SW damage my factory head unit?
The product description explicitly warns that improper installation can damage the source unit — consult the installation instructions before connecting to any factory head unit. Some OEM head units are sensitive to the impedance loading of external adapters on their speaker outputs.
Does the RFI2SW replace a line output converter (LOC)?
A basic adapter like the RFI2SW passively converts the high-level signal. For sensitive factory head units, a dedicated line output converter with level-matching circuitry may provide better protection and a more balanced signal. Confirm the appropriate solution for your vehicle's head unit with your installer before purchasing.
How many channels does the RFI2SW provide?
Channel count is not confirmed in the supplier data. Confirm from the official Rockford Fosgate RFI2SW product page. The "2SW" designation suggests a 2-channel (stereo) output.
Which adapter should I choose — RFI2SW or RFIF2SW?
Choose based on your installation layout. The RFI2SW (male output) plugs directly into the amplifier — best when the adapter can reach the amplifier's RCA inputs without slack. The RFIF2SW (female output) requires an RCA cable between adapter and amplifier — best when distance or routing requires a separate cable run.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Plug-N'-Play Design For Simple Installation!Speaker Plug AdaptorsThe Aerpro APS55 Speaker Plug Adaptors suit various Citroen and Peugeot vehicles, converting the original speaker plugs into standard-size aftermarket speaker terminals. The plug-and-play design enables speakers to be installed into the vehicle without the need to cut the original vehicle wiring loom, resulting in a simple yet professional installation that can be reversed at any time.Features: Suitable for various Citroen and Peugeot vehicles. Converts the original speaker plugs in the vehicle to standard female blade terminals. Plug-and-play design for simple installation of aftermarket speakers. No cutting of the vehicle wiring loom. Sold as a pair Specifications: Harness Type: Speaker Adaptors Sold As: Pair Packaging Type: Side Blister Weight: 0.10kg Vehicle Compatibility: Citroen Berlingo (2008 - 2015) Citroen C1 (2005 - 2014) Citroen C2 (2003 - 2005) Citroen C2 (2006 - 2008) Citroen C3 (2003 - 2005) Citroen C3 (2006 - 2009) Citroen C3 (2009 - 2016) Citroen C4 (2005 - 2011) Citroen C5 (2001 - 2005) Citroen C5 (2005 - 2010) Peugeot 206 (2002 - 2007) Peugeot 207 (2006 - 2011) Peugeot 208 (2012 - ) Peugeot 3008 (2010 - 2015) Peugeot 307 T5 (2001 - 2005) Peugeot 307 T6 (2005 - 2009) Peugeot 308 T7 (2008 - 2014) Peugeot 407 (2004 - 2010) Peugeot 508 (2011 - ) Peugeot Expert (2007 - 2016) Peugeot Partner (2008 - 2014)
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Designed to Connect Directly to the Existing Wiring in the Vehicle with Ease!
Steering Wheel Control Interface (SWC)The Aerpro CHTO3C allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls. Engineered to suit various Toyota vehicles with 28 pin connector, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required.
Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket headunit and the Aerpro Steering Wheel Control Interface.
Please Note:
Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (Sold Separately).
Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
Compatible with listed vehicles that have 28 pin connector.
Not compatible with factory premium, OEM amplified or factory upgraded systems.
Aerpro CHTO3C Features:
Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
Supports OEM Phone Button when connected to compatible aftermarket Bluetooth headunits
Compatible with listed vehicles that have 28 pin connector
Not compatible with factory premium, OEM amplified or factory upgraded systems
Provides an output for reverse trigger
Fitted with a vehicle specific plug, no cutting of wires required
To simplify installation, this interface is compatible with Aerpro APP9 aftermarket headunit harness adapter with SWC patch lead
Requires SWC patch lead (Available Separately) to provide compatibility with the aftermarket headunit
Aerpro CHTO3C Specifications:
Interface Type: Analogue
Patch Lead Type: C
Phone Button Compatibility: Yes
Voice Assistant Button Support: No
Outputs:Reverse Trigger: Yes (Purple / White)Park Brake: NoSpeed Pulse: NoIllumination: NoAmp Remote: NoTelephone Mute: No
Other Retention:OEM Amplified System: No
Packaging Type: Side Blister
Weight: 0.10kg
Vehicle Compatibility:
Toyota 86 2016
Toyota Aurion 2012 - 2014
Toyota Aurion 2015 - 2018
Toyota C-HR 2016 - 2019
Toyota Camry 2012 - 2017
Toyota Corolla 2012 - 2015 Hatch
Toyota Corolla 2013 - 2016 Sedan
Toyota Corolla 2015 - 2018 Hatch
Toyota Corolla 2017 - 2019 Sedan
Toyota Fortuner 2015 - 2020
Toyota HiAce 2012 - 2019
Toyota Hilux 2012 - 2013
Toyota Hilux 2014
Toyota Kluger 2014 -2019
Toyota Landcruiser 2012 - 2015 200 Series
Toyota Landcruiser 2016 - 2021 200 Series
Toyota Prado 2014 - 2017 150 Series
Toyota Prius C 2009
Toyota RAV4 2013 - 2018
Toyota Rukus (Rumion) 2010 - 2015
Toyota Tundra 2007 - 2013
Toyota Tundra 2014
Toyota Yaris 2011 - 2013
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Allows You to Upgrade to An Aftermarket Head Unit Whilst Maintaining Use of Your Factory Steering Wheel Controls
Infodapter Control Harness
The Aerpro CAGM01 Control Harness allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls and vehicle settings. Info adaptors are considered a primary harness and will require a secondary harness and patch lead to be used in conjunction for plug and play.
Please Note:
Aftermarket headunit requires a rear camera input.
Please be aware when installing a High Definition Camera, the camera resolution will be reduced using this product.
Features:
Plug and play
The Infodapter allows vehicle information to be displayed on any aftermarket AV head unit with a reverse camera input
Retains the factory Steering wheel controls
Retains vehicle specific settings and information
Retains the factory camera if equipped when installing a compatible aftermarket AV headunit
Allows clock change and vehicle settings from aftermarket head unit
Specifications:
Phone Button Compatibility: Yes
Patch Lead: Type C
Outputs:
Reverse (Purple/Violet): Yes
Handbrake (Light Green): Yes
VSS (Pink): Yes
Telephone Mute (Pink/Black): Yes
Note: Optical parking sensor display and climate control visualization with an aftermarket AV head unit, Connect Blue/White wire to aftermarket headunit to enable factory amp.
Vehicle Compatibility:
Holden Astra (2014 - 2016 PJ)
Holden Barina (2011 - 2016 TM)
Holden Colorado (2014 - 2016)
Holden Colorado 7 (2014 - 2016)
Holden Cruze (2009 - 2016 JG, JH)
Holden Trax (2013 - 2017 TJ)
Opel Astra (2012 - 2013 AS)
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Simple Plug-N'-Play Installation of Your Aftermarket Headunit Into Your Vehicle!APP8 Secondary ISO HarnessSuitable for various Sony Aftermarket AV Headunits with 16-pin connectors, APP8SP6 is a Secondary ISO Harness that converts the aftermarket head unit plug into a universal double ISO connector system. For a simple plug-and-play installation of your aftermarket head unit into your vehicle, pair this harness with an Aerpro Vehicle Specific Harness; APP Series Primary ISO Harness, Steering Wheel Control Interface, or Infodapter, and the two looms will connect together via the ISO connector system.Please Note: Harnesses vary between head unit models, to find the correct harness for your head unit, use the Aerpro Headunit Selector. Depending on the vehicle and aftermarket head unit, installation may not be completely plug-and-play, a small amount of hard-wiring may still be required to complete the installation. Includes VSS, handbrake and reverse camera trigger wires This harness has the same connector as APP8SP5 but includes a VSS wire. Features: 16-pin plug designed specifically to suit various Sony Aftermarket AV Headunits Includes VSS, handbrake, and reverse camera trigger wires Converts the aftermarket head unit plug into a universal double ISO connector system Provides a Plug and Play installation solution when paired with an Aerpro Vehicle Specific Harness; APP Series Primary ISO Harness, Steering Wheel Control Interface, or Infodapter (Some hard-wiring may still be required) Secure Clips on ISO connectors and head unit plug to ensure secure and long-lasting connection Specifications Headunit Brand Compatibility: Various Sony AV Headunits Headunit Plug Type: 16 Pin Weight: 0.07kg
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
Designed For Simple DIY Installation!
OEM Camera Retention Harness
The Aerpro APVFD02 is suitable for use with Ford Falcon FG (Series 1 and 2) vehicles, the Aerpro APVFD02 OEM camera retention adaptor allows you to retain the factory reverse camera when installing a compatible aftermarket AV headunit into the vehicle. The adaptor includes two plugs; a 12 pin for series 1 vehicles and a 24 pin for series 2 vehicles; that connects to the factory reverse camera loom and provides a RCA plug that simply connects to the reverse camera input on the aftermarket headunit.
Please Note: The Aerpro APVFD02 reverse camera retention harness does not suit the Ford FG-X model.
Features:
Suitable for use in Ford Falcon FG (Series 1 & 2) vehicles that have a factory reverse camera fitted
Enables the OEM factory fitted reverse camera to display on a compatible aftermarket headunits
12 Pin (Series 1) and 24 Pin (Series 2) vehicle specific plugs
Standard RCA plug connects to the reverse camera input on the aftermarket AV headunit
6V Regulator Inline
Specifications:
Adaptor Type: OEM Reverse Camera Retention
Vehicle Plug: 12 PIN & 24 PIN
Camera Plug: RCA
Vehicle Compatibility: Ford Falcon (2008 - 2014 FG)
Weight: 0.45kg
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
