Rockford Fosgate P300-12 Punch 12" 300W Amplified Subwoofer One Box. All the Bass. Product Overview The Rockford Fosgate P300-12 is a complete all-in-one amplified subwoofer system, housing a proprietary Punch 12" high-output woofer, a 300 Watt internal amplifier, and a custom sealed enclosure in a single self-contained unit. Designed for straightforward bass upgrades to factory systems and space-conscious installs, the P300-12 requires only a power feed, ground, and audio signal to get running no separate amplifier, no separate enclosure, and no complex integration. The closed-loop design ensures the woofer, amplifier, and enclosure are engineered and tuned to work together as a matched system, delivering consistent, optimised performance straight out of the box. A built-in adjustable bass boost EQ, 12 dB/octave adjustable low-pass crossover, 0°/180° phase switch, intelligent auto turn-on, and an included remote bass level control give you full system management without additional processors or controllers. Constructed from 5/8" MDF and finished in industrial heat-activated vinyl, the P300-12 is built to handle the knocks and scrapes of daily boot, cargo area, and under-seat use in Australian vehicles. Key Specifications Subwoofer: 12" Rockford Fosgate Punch proprietary high-output woofer Amplifier: Internal 300W Enclosure type: Sealed (custom closed-loop) Construction: 5/8" MDF Finish: Industrial heat-activated vinyl Crossover: Adjustable 12 dB/octave low-pass Phase switch: 0°/180° Inputs: Low-level RCA and speaker-level Auto turn-on: Intelligent auto turn-on/off Remote bass control: Included Protection: Thermal and over/under voltage Features & Benefits All-in-one amplified subwoofer system: Woofer, amplifier, and sealed enclosure in a single unit. Eliminates the need for a separate amplifier, separate enclosure, and separate wiring runs between components. Ideal for factory system upgrades, rental vehicles, and space-restricted installs in Australian hatchbacks, SUVs, and utes. 300W internal amplifier with closed-loop design: The amplifier is matched and tuned to the specific woofer and enclosure by Rockford Fosgate engineers, ensuring the system performs at its optimum without the guesswork of matching separate components. A closed-loop system consistently outperforms a same-wattage mix-and-match setup. Proprietary high-output Punch woofer: The 12" driver is purpose-designed for this specific sealed enclosure and power level, delivering the punchy, controlled bass response the Punch series is known for across a wide range of music genres. Adjustable 12 dB/octave low-pass crossover: Set the crossover point to match your existing speaker system, ensuring the subwoofer handles only the frequencies it is designed for and integrates cleanly with your mid and full-range speakers. Built-in adjustable bass boost EQ: Dial in additional low-frequency emphasis to suit personal preference or music genre without an external equaliser. Particularly useful for open-air or acoustically challenging vehicle environments. 0°/180° phase switch: Align the subwoofer's output phase with your existing speakers for coherent, integrated bass reproduction essential when the subwoofer is mounted in a different location to the main speakers. Separate low-level (RCA) and speaker-level inputs: Connects to aftermarket head units via RCA or directly to factory speaker outputs via speaker-level inputs. No head unit replacement required for factory system integration. Intelligent auto turn-on/off: Senses the audio signal and powers up and down automatically. No remote turn-on wire required, simplifying installation in factory and OEM audio systems common in Australian vehicles. Remote bass level control included: Adjust bass output from the driver's seat without accessing the subwoofer unit itself. The remote control is included in the box no additional purchase needed. Thermal and over/under voltage protection: Built-in protection circuits monitor operating temperature and supply voltage, shutting the system down safely before damage occurs. Adds long-term reliability in hot Australian conditions where boot and cargo temperatures can spike significantly. Detachable power/ground connector: Simplifies installation and removal. Practical for vehicles where the subwoofer may need to be temporarily removed or transferred between vehicles. 5/8" MDF construction with industrial heat-activated vinyl: Rigid enclosure walls minimise flex and resonance at high output levels. The heat-activated vinyl finish is more durable and scratch-resistant than standard carpet, better suited to daily cargo area use. High-efficiency, low current design: Draws less current from the vehicle's electrical system than equivalent traditional amplifier and subwoofer combinations, reducing strain on factory alternators and wiring important for Australian vehicles without upgraded electrical systems. Technical Specs Specification Detail SKU P300-12 Brand Rockford Fosgate Subwoofer Driver 12" Rockford Fosgate Punch proprietary high-output woofer Internal Amplifier 300W Enclosure Type Sealed (closed-loop) Construction Material 5/8" MDF Finish Industrial heat-activated vinyl Crossover Adjustable 12 dB/octave low-pass Bass Boost EQ Built-in adjustable Phase Switch 0° / 180° Signal Inputs Low-level RCA + speaker-level Auto Turn-On Intelligent auto turn-on/off Power/Ground Connector Detachable Input Terminals Large AWG Remote Bass Control Included Protection Thermal + over/under voltage Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Factory (OEM) head units via speaker-level inputs and intelligent auto turn-on Aftermarket head units via low-level RCA inputs Hatchbacks, sedans, SUVs, and wagons with boot or cargo area installations Utes and dual-cab trucks with under-seat or tray-area mounting Vehicles requiring a compact, self-contained bass solution without a separate amplifier Rockford Fosgate RCA cables and wiring accessories for signal connection Frequently Asked Questions Do I need a separate amplifier to run the P300-12? No. The P300-12 has a 300W amplifier built directly into the enclosure. You only need to connect a power feed, ground, and an audio signal from your head unit or factory system to get it running. Can the P300-12 connect to a factory head unit without RCA outputs? Yes. The P300-12 features both low-level RCA inputs and speaker-level inputs, allowing direct connection to factory head unit speaker outputs without requiring an aftermarket head unit or line output converter. Is a remote bass control included with the P300-12? Yes. A remote bass level control is included in the box, allowing driver's seat adjustment of bass output without accessing the subwoofer unit itself no additional purchase required. What is the advantage of the closed-loop design? The closed-loop design means the woofer, amplifier, and enclosure are engineered as a matched system by Rockford Fosgate. This ensures the amplifier's output characteristics are optimised for the specific driver and enclosure volume, delivering more consistent and accurate bass performance than a mix-and-match separate component setup. Is the P300-12 suitable for daily boot and cargo area use in Australian conditions? Yes. The industrial heat-activated vinyl finish resists scrapes and bumps, the MDF construction minimises resonance, and the built-in thermal and over/under voltage protection safeguards the system against the high boot temperatures common in Australian vehicles during summer. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P1-2X10 Punch Dual P1 10" Vented Loaded Enclosure Dual 10s, Genuine Punch Performance Product Overview The Rockford Fosgate P1-2X10 is a dual 10" vented loaded enclosure housing two genuine Punch P1 subwoofers, delivering 500 Watts RMS combined power handling in a single factory-built, computer-tuned enclosure. Pre-wired internally to a 2-ohm load, it offers the dual-driver bass impact of the Punch P1 loaded range in a more compact width than the dual 12" P1-2X12 making it the practical choice for Australian vehicles where boot width is a constraint but dual-driver bass output is still the priority. Like all Punch loaded enclosures, the P1-2X10 uses the same genuine Punch P1 woofers available separately, factory-loaded and tuned in a vented enclosure built from 5/8" MDF with a proprietary high-flow, low-noise port, high-density carpet finish, and high-current compression binding posts. The P1 loaded range is specifically noted for its lighter weight and easier handling compared to P2 and P3 equivalents a practical advantage for Australian owners who regularly move or transfer their subwoofer setup between vehicles. Key Specifications Subwoofers: Dual 10" Rockford Fosgate Punch P1 Power handling: 500W RMS Pre-wired impedance: 2 ohm (internally wired) Enclosure type: Vented Construction: 5/8" MDF Finish: High-density carpet Port: Proprietary high-flow, low-noise Input terminals: High-current compression binding posts Enclosure design: Computer-aided design tuned Dimensions: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Dual 10" Punch P1 drivers: The same genuine Punch P1 woofers available as standalone drivers, factory-loaded and tuned as a matched pair in a single vented enclosure. Identical P1 tonal performance to a custom dual 10" build without the time and cost of sourcing components separately. 500W RMS combined power handling: Pre-wired to 2 ohms for straightforward amplifier matching. Delivers dual-driver bass impact from a mid-range mono amplifier the same power handling as the dual 12" P1-2X12 in a more compact dual 10" footprint. More compact than the P1-2X12: The dual 10" configuration produces a narrower enclosure than the dual 12" P1-2X12, fitting into boot spaces where 12" driver width is a constraint while still delivering the impact of a dual-driver vented system. Pre-wired to 2 ohms: Factory internal wiring presents a 2-ohm load to the amplifier, consistent with the P1-2X12. Confirm your mono amplifier's 2-ohm power rating before purchase this differs from the 1-ohm pre-wiring of the P2 and P3 loaded enclosures in this catalogue. Vented enclosure for high-output bass: The vented design produces higher output at the tuning frequency than a sealed enclosure, delivering the loud, impactful bass response preferred for dual-driver high-output systems in vehicle boot and cargo spaces. Proprietary high-flow, low-noise port: Purpose-engineered to minimise air turbulence and port chuffing at high excursion levels. Maintains clean, articulate bass at sustained high-volume use consistent with the port quality standard across the entire Punch loaded enclosure range. Computer-aided design tuning: Enclosure volume and port dimensions are calculated specifically for the P1 10" driver pair, ensuring the vented alignment is optimised for the intended tuning frequency rather than approximated. Lighter and easier to handle than P2 and P3 equivalents: The P1 loaded range is specifically noted by Rockford Fosgate for being easier to move in and out of vehicles than P2 and P3 enclosures a practical benefit for Australian owners who regularly remove or reposition their subwoofer system. 5/8" MDF construction: Rigid enclosure walls minimise panel flex and resonance at sustained 500W RMS combined input levels, ensuring accurate bass reproduction at the output levels this enclosure is designed to handle. High-density carpet finish: Durable, professional appearance suited to daily boot and cargo area use in Australian vehicles. High-current compression binding posts: Secure, reliable connections appropriate for the current demands of a 500W RMS, 2-ohm system. Technical Specs Specification Detail SKU P1-2X10 Brand Rockford Fosgate Subwoofer Drivers 2 x 10" Rockford Fosgate Punch P1 Woofer Quantity 2 Power Handling 500W RMS Pre-Wired Impedance 2 ohm (internally wired) Enclosure Type Vented Port Type Proprietary high-flow, low-noise Construction Material 5/8" MDF Finish High-density carpet Input Terminals High-current compression binding posts Enclosure Design Computer-aided design tuned Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Mono amplifiers stable at 2 ohms, rated at or near 500W RMS at 2 ohms Rockford Fosgate Power and Punch series mono amplifiers rated at 2 ohms Sedans, hatchbacks, SUVs, and utes with boot or cargo area space where dual 12" enclosure width is impractical Vehicles requiring a dual-driver vented bass solution in a more compact width than the P1-2X12 Rockford Fosgate wiring kits for 2-ohm mono amplifier installation Rockford Fosgate RCA cables and signal accessories Frequently Asked Questions What amplifier does the P1-2X10 require? The P1-2X10 is pre-wired to 2 ohms and handles 500W RMS combined. A mono amplifier stable at 2 ohms and rated at or near 500W RMS at 2 ohms is recommended. Confirm your amplifier's 2-ohm rating before purchase this enclosure presents a 2-ohm load, not 1 ohm. What is the difference between the P1-2X10 and P1-2X12? Both enclosures handle 500W RMS combined and are pre-wired to 2 ohms. The P1-2X10 uses dual 10" P1 drivers in a more compact enclosure width, while the P1-2X12 uses dual 12" P1 drivers in a wider enclosure (86.0 cm). Choose the P1-2X10 when boot width rules out the dual 12" footprint but dual-driver output is still the goal. Are the drivers in the P1-2X10 the same as the standalone P1 subwoofers? Yes. The P1-2X10 is loaded with genuine Rockford Fosgate Punch P1 10" drivers the same woofers available separately in the Punch P1 range factory-loaded and tuned in a computer-optimised vented enclosure. Why is the P1-2X10 pre-wired to 2 ohms instead of 1 ohm? The Punch P1 drivers used in this enclosure are single voice coil 4-ohm drivers. Wiring two in parallel produces a 2-ohm load the lowest achievable impedance with this driver configuration. The P2 and P3 loaded enclosures use dual voice coil drivers, allowing 1-ohm wiring. Confirm your amplifier's 2-ohm stability before connecting. Is the P1-2X10 easier to handle than the P2 and P3 dual enclosures? Yes. The P1 loaded range is specifically noted by Rockford Fosgate for lighter weight and easier handling compared to P2 and P3 equivalents. Confirm the exact shipping weight with your supplier, as this data was not available at time of publishing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less