Drivetech 4x4 DT-17104 QC3.0 Quick Charge USB and Dual 55W Type-C Port Power Socket A multi-port fast charging power socket combining a QC3.0 Quick Charge USB port with two 55W Type-C ports, designed for dash or panel mount installation across 12V and 24V vehicles. Product Overview The Drivetech 4x4 DT-17104 is a three-port in-vehicle charging socket providing a QC3.0 Quick Charge USB port alongside two 55W Type-C ports, covering fast charging needs for smartphones, tablets, portable batteries, and USB-C powered accessories simultaneously. Compatible with both 12V and 24V electrical systems, the DT-17104 is suitable across light passenger vehicles, 4WDs, trucks, and commercial vehicles. Blue LED backlight illumination marks the socket position clearly in dim conditions, and a protective cover shields the ports from dust and grime when not in use. ABS plastic housing provides durable, lightweight construction suited to permanent panel installation. Fitting hardware including two terminals, a plastic fitting ring, and two screws is included for installation. Features & Benefits The QC3.0 Quick Charge USB port delivers significantly faster charging speeds to compatible devices compared to a standard 5V USB output, reducing charge times for smartphones, GPS units, and other QC3.0-compatible accessories while on the move. Two 55W Type-C ports provide high-power USB-C output for charging modern laptops, tablets, smartphones, and USB-C powered accessories at full rated speed. With two Type-C ports available simultaneously, multiple high-draw devices can be charged at the same time without compromising output. The 12V and 24V dual input compatibility makes the DT-17104 suitable for installation in both standard light vehicle and heavy commercial 24V electrical systems. A dust and grime protective cover keeps the ports clean when not in use, extending the service life of the socket in dirty or dusty vehicle environments. ABS plastic housing balances durability and weight for a permanent panel installation. Included fitting hardware covers all components required for installation out of the box. Technical Specs Specification Detail Part Number DT-17104 Type Accessory Socket Plug & Panel USB Port QC3.0 Quick Charge Type-C Ports 2 x 55W Input Voltage DC 12V / DC 24V Illumination Blue LED Backlight Protective Cover Yes — dust and grime protection Housing ABS Plastic Included Hardware 2x Fitting Terminals, 1x Plastic Fitting Ring, 2x Screws Warranty 1 Year Goes Well With Drivetech 4x4 DT-06101 12/24V 20A Power Socket for a matched panel installation Drivetech 4x4 OE Style Push Button Switches for a complete factory-style panel build Automotive Cable and Wiring Accessories for clean installation runs Frequently Asked Questions What is QC3.0 Quick Charge and which devices support it? QC3.0 is Qualcomm's third-generation fast charging standard, capable of charging compatible devices significantly faster than a standard 5V USB output by negotiating a higher voltage and current with the connected device. Most modern Android smartphones and a wide range of accessories support QC3.0. Apple devices connected via a USB-A to Lightning cable will charge at standard speed from the QC3.0 port; Apple fast charging is supported via the Type-C ports. Can all three ports be used simultaneously? Yes. The DT-17104 provides one QC3.0 USB port and two 55W Type-C ports that can be used at the same time, allowing up to three devices to charge simultaneously. Actual charging speeds per port may vary depending on the total load across all active ports. Is this socket compatible with 24V truck and commercial vehicle systems? Yes. The DT-17104 accepts DC 12V and DC 24V input, making it compatible with both standard light vehicle and 24V heavy commercial electrical systems without requiring an additional voltage converter. Does the protective cover need to be removed to use the ports? Yes. The cover is designed to protect the ports from dust and grime when not in use and should be opened or removed to access the USB and Type-C ports for charging. The cover helps extend the service life of the socket in dusty or dirty vehicle environments. Does the DT-17104 come with all hardware needed for installation? Yes. The pack includes two fitting terminals, one plastic fitting ring, and two screws, covering the hardware required for panel installation. Wiring to the vehicle's electrical system will be required and is not included.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-06101 12/24V 20A Dash or Panel Mount Power Socket A versatile 20A rated power socket with blue LED backlight, designed for clean dash or panel mount installation across both 12V and 24V vehicle applications. Product Overview The Drivetech 4x4 DT-06101 is a 20A power socket rated for 12V and 24V electrical systems, suitable for a wide range of vehicle types from light passenger vehicles and 4WDs to 24V trucks and commercial vehicles. The socket installs directly into a 29mm mounting hole for a clean, flush finish in dash panels, centre consoles, or custom switch panels. Blue LED backlighting provides clear visual identification of the socket location in low-light cabin and vehicle environments, making it easy to locate for connecting accessories day or night. Features & Benefits The 12/24V dual voltage compatibility makes the DT-06101 suitable for installation across both standard 12V light vehicles and 24V heavy commercial and truck applications without requiring separate part numbers for different fleets or builds. The 20A current rating handles a broad range of accessory loads for a panel-mounted power socket, covering typical 4WD and vehicle auxiliary power applications. Blue LED backlighting illuminates the socket position for easy access in dim conditions. The 29mm mounting hole requirement suits standard aftermarket panel cut-outs and is compatible with a wide range of mounting options including dash panels, centre consoles, and custom fabricated switch panels. Technical Specs Specification Detail Part Number DT-06101 Type Connector / Plug / Socket Voltage 12V / 24V Current Rating 20A Mounting Dash or Panel Mount Mounting Hole 29mm Illumination Blue LED Backlight Warranty 1 Year Goes Well With Drivetech 4x4 OE Style Push Button Switches for a matched panel installation Anderson Plugs and Connectors for extended auxiliary power distribution Automotive Cable and Wiring Accessories for clean installation runs Frequently Asked Questions Is this socket compatible with both 12V and 24V vehicles? Yes. The DT-06101 is rated for use on both 12V and 24V electrical systems, making it suitable for light passenger vehicles, 4WDs, trucks, and commercial vehicles without requiring a separate part for each application. What size hole is required to mount this socket? A 29mm mounting hole is required. This is a standard size compatible with most dash panels, centre consoles, and aftermarket switch panels. What current rating is this socket suited for? The DT-06101 is rated at 20A. This suits a wide range of auxiliary accessory loads. For applications drawing more than 20A, a higher-rated socket or a relay-based circuit should be used. Can this socket be mounted in a custom switch panel or console? Yes. The dash or panel mount design and standard 29mm mounting hole make the DT-06101 compatible with a wide range of installation locations including factory dash blanks, aftermarket switch panels, and custom fabricated consoles. Does the blue LED illuminate at all times when the vehicle is powered? The LED backlight behaviour will depend on how the socket is wired in the vehicle. Wiring to a constant 12V or 24V source will keep the LED on whenever the vehicle is powered. Please refer to the product wiring instructions included with the unit for connection details.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-11077 OE Style Push Button Switch Beacon Suits Toyota and Mitsubishi A direct OE-style replacement beacon push button switch engineered to fit seamlessly into factory switch panels on selected Toyota and Mitsubishi vehicles, matching the look and function of the original equipment. Product Overview The Drivetech 4x4 DT-11077 is an OE-style push button switch designed as a factory-matched replacement or addition for beacon control across a wide range of popular Toyota and Mitsubishi platforms. Sized at 32.5mm x 22mm to fit standard OEM switch blanks and panels, the DT-11077 integrates cleanly into the factory dashboard without modifications, maintaining the factory appearance. The switch operates as a simple On-Off SPST unit rated at 3A at 12V with blue LED illumination for easy identification in low-light cabin environments. A straightforward four-wire connection covers earth, dash light circuit, 12V input, and 12V output, making installation accessible for both professional installers and experienced DIY fitters. Compatible vehicles include the Prado 150 Series, LandCruiser 200 Series, RAV4, HiLux GUN Series, and Mitsubishi Triton. Features & Benefits The OE-style design matches factory switch aesthetics on compatible Toyota and Mitsubishi vehicles, allowing installation directly into existing switch panel blanks without any panel cutting or custom fabrication. The compact 32.5mm x 22mm footprint is engineered to the same dimensions as the factory switch positions on supported platforms. Blue LED illumination provides clear visual confirmation of switch status in all cabin lighting conditions, consistent with factory switch panel illumination. The SPST On-Off action provides straightforward beacon control without accidental state changes. At 3A at 12V, the switch handles beacon accessory loads while the optional blue wire dash light circuit connection allows the switch illumination to dim with the factory instrument lighting for a fully integrated appearance. Technical Specs Specification Detail Part Number DT-11077 Type Push Button Switch Switch Action On-Off (SPST) Power Rating 3A @ 12V Voltage 12V Mount Dimensions 32.5mm (L) x 22mm (W) Switch Illumination Blue LED Wiring — Black Earth Wiring — Blue Dash Light Circuit (optional) Wiring — Red 12V Input Wiring — Green 12V Output Warranty 1 Year Compatible With Toyota Prado 150 Series — 2010 to 2018 Toyota LandCruiser 200 Series — 2008 to current Toyota RAV4 — 2006 to 2011 Toyota HiLux GUN Series — 09/2015 to current Mitsubishi Triton — 2015 to current Frequently Asked Questions Will this switch fit directly into my factory switch panel without modifications? Yes. The DT-11077 is sized at 32.5mm x 22mm to match the OE switch blank dimensions on compatible Toyota and Mitsubishi platforms, allowing it to install directly into existing factory switch panel positions without cutting or custom fabrication. What is the blue wire used for? The blue wire connects to the vehicle's dash light circuit and is optional. When connected, it allows the switch's blue LED illumination to dim in sync with the factory instrument panel lighting for a fully integrated factory appearance. If not connected, the LED will remain at full brightness regardless of instrument lighting state. What does SPST On-Off mean? SPST stands for Single Pole Single Throw. In practical terms, this means the switch has one input and one output and toggles between two states — on and off. Each press of the button changes the state, providing straightforward beacon control without momentary or multi-position complexity. Is this switch suitable for accessories other than a beacon? The DT-11077 is rated at 3A at 12V. It is suitable for any 12V accessory within this current rating that benefits from an OE-style panel-mounted switch, provided the accessory load does not exceed the rated current. For higher-draw accessories, a relay should be used with this switch as the trigger. Does this switch work on vehicles outside the listed compatibility range? The listed vehicles are those confirmed compatible with the OE panel fitment dimensions of the DT-11077. The switch may physically fit other vehicles with the same 32.5mm x 22mm switch blank size, but fitment outside the listed models is not confirmed by Drivetech 4x4 and should be verified before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

InstallBay IBFCRIMPER Self-Adjusting Ferrule Crimping Tool Professional-grade self-adjusting ferrule crimping tool built for installers, covering 7 to 23 AWG wire gauges with a 0.25-6.0mm2 crimping capacity, side ferrule insertion, and specially hardened spring steel construction for faster installs and long-term durability. Product Overview The InstallBay IBFCRIMPER is a handheld, self-adjusting ferrule crimping tool designed to speed up installation time in professional and DIY car audio, auto electrical, and general wiring applications. Ferrule crimps provide a secure, professional termination on stranded wire ends, preventing fraying and ensuring reliable connections in terminal blocks, amplifiers, distribution blocks, and other audio and electrical components. The IBFCRIMPER eliminates the need to manually select a die size — the tool self-adjusts to the correct crimping size for the ferrule being used, reducing setup time between different wire gauges. Ferrules are inserted from the side of the tool for a more natural workflow, allowing faster single-handed loading. The burnished finish and specially hardened spring steel construction ensure the tool outlasts lesser alternatives on the market, making it a reliable addition to any installer's toolkit. Features & Benefits Self-Adjusting Crimping Mechanism Automatically adjusts to the correct die size for the ferrule being crimped, eliminating the need to manually rotate or select a jaw setting between wire gauges and speeding up repetitive crimping tasks. Side Ferrule Insertion Ferrules are loaded from the side of the tool rather than the front, allowing for a more efficient and ergonomic crimping workflow, particularly during high-volume installation work. Wide Crimping Capacity Covers 7 to 23 AWG (0.25-6.0mm2), accommodating a broad range of wire gauges commonly used in car audio, auto electrical, marine, and general wiring installations. Specially Hardened Spring Steel Constructed from specially hardened spring steel for extended service life and consistent crimping performance over many thousands of cycles, outlasting standard crimping tools. Burnished Finish The burnished surface finish provides corrosion resistance and a professional appearance suitable for a working installer's toolkit. Technical Specs Specification Details Brand InstallBay Part Number IBFCRIMPER Product Type Ferrule Crimping Tool Crimping Capacity 0.25-6.0mm2 Wire Gauge Range 7 AWG to 23 AWG Adjustment Self-Adjusting Ferrule Insertion Side Insertion Construction Specially Hardened Spring Steel Finish Burnished Compatible With / Goes Well With The InstallBay IBFCRIMPER is a universal ferrule crimping tool suitable for use with standard ferrule crimp terminals across a wide range of wire gauges. Goes Well With: Ferrule crimp terminals (0.25-6.0mm2) InstallBay wiring and installation accessories Amplifier wiring kits Distribution blocks and terminal blocks Frequently Asked Questions What is a ferrule crimp and why is it used? A ferrule is a small metal sleeve crimped onto the end of a stranded wire to bind the individual strands together, creating a solid, uniform termination. Ferrule crimps are commonly used in car audio, auto electrical, and marine installations to terminate wires into terminal blocks, amplifier inputs, distribution blocks, and other screw-type or push-in connectors. They prevent wire fraying, reduce resistance at connection points, and provide a more professional and reliable finish than bare stranded wire. Does the IBFCRIMPER require manual die selection between different wire gauges? No. The IBFCRIMPER is self-adjusting, meaning the tool automatically sets the correct crimping die size for the ferrule inserted. There is no need to manually rotate a die head or select a jaw setting when switching between different wire gauges within the tool's 0.25-6.0mm2 capacity range. What wire gauge range does the IBFCRIMPER cover? The IBFCRIMPER covers 7 AWG to 23 AWG, equivalent to 0.25-6.0mm2. This range accommodates the majority of wire gauges used in car audio, auto electrical, and general 12V wiring applications. What is the advantage of side ferrule insertion? Side insertion allows ferrules to be loaded into the tool from the side rather than pushing them straight in from the front. This makes the loading process faster and more ergonomic, particularly during repetitive crimping tasks where installers are working through a large number of wire terminations in a single session. How does the IBFCRIMPER compare to standard crimping tools? The IBFCRIMPER's self-adjusting mechanism, side insertion design, and specially hardened spring steel construction are features typically found in professional-grade tools. The hardened steel extends the service life of the tool significantly compared to standard spring steel alternatives, making it a more cost-effective long-term investment for regular installers.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

A compact, IP66-rated 60A circuit breaker built for automotive, marine, and 4WD electrical systems — pack of 5. Product Overview The OEX ACX2086/5 is a pack of five 60A Type 3 mini manual reset circuit breakers designed for surface-mount installation in automotive, 4WD, caravan, and marine electrical systems. Type 3 manual reset means the breaker trips automatically under fault conditions and must be manually reset to restore the circuit — with the added convenience of a switchable function, allowing the circuit to be intentionally opened and closed by the operator when needed. Rated at 32V DC and housed in UL 94V-0 thermal plastic, each breaker carries an IP66 environmental rating and meets SAE J553, SAE J1171, and UL1500 (ignition protected) compliance standards — making them suitable for fuel-system-adjacent and marine applications where ignition protection is a requirement. Stud insulators are included, and terminal lugs suit 6mm or ¼ inch hardware. At just 58.2mm × 35.7mm × 34.7mm, these are a compact, professional-grade solution for protecting high-current circuits in tight installations. Key Specifications 60A current rating 32V DC maximum voltage rating Type 3 breaker action — automatic trip on fault, manual reset required, with switchable function IP66 environmental rating — dust-tight and protected against high-pressure water jets Housing: UL 94V-0 rated thermal plastic (flame retardant) Operating temperature range: -40°C to +85°C Dimensions: 58.2mm (H) × 35.7mm (W) × 34.7mm (D) Stud type: #10-32 threaded studs Terminal / lug compatibility: 6mm or ¼ inch Protective stud insulators included Compliance: SAE J553, SAE J1171, UL1500 (ignition protected) Pack quantity: 5 units Compact mini surface-mount design 1-year OEX warranty Features & Benefits Type 3 manual reset with switchable function — Trips automatically under overload or short-circuit conditions, requiring a deliberate manual reset rather than auto-resetting unexpectedly. The switchable function also allows the operator to intentionally isolate the circuit — useful for service, maintenance, or staged installations. IP66 rated — Fully dust-tight and resistant to powerful water jets, making these breakers suitable for underbonnet, engine bay, bilge, and exterior panel installations where moisture and road spray are unavoidable in Australian conditions. SAE J553, J1171 and UL1500 compliant — Meets internationally recognised automotive and marine electrical standards, including ignition protection certification (UL1500) — essential for fuel-system-adjacent installs in boats, caravans, and 4WDs. -40°C to +85°C operating range — Handles extreme temperature swings from cold-climate starts through to underbonnet heat in outback Australian conditions without thermal degradation or nuisance tripping. UL 94V-0 flame-retardant housing — The thermal plastic housing is self-extinguishing to UL 94V-0 standard, reducing fire propagation risk in the event of a fault condition near the breaker. Compact mini form factor (58.2 × 35.7 × 34.7mm) — Surface-mounts into tight spaces on switch panels, firewall installations, and marine electrical boxes without requiring large cutouts or custom enclosures. #10-32 threaded studs with 6mm or ¼ inch lug compatibility — Standard stud size compatible with widely available automotive and marine terminal lugs, simplifying wiring without the need for specialised connectors. Pack of 5 — Ideal for workshops, fleet installers, and multi-circuit installations where consistent, professional-grade protection is needed across multiple runs. Reduces per-unit cost compared to purchasing individually. Protective stud insulators included — Prevents accidental shorting on adjacent metalwork or components without requiring additional insulation hardware. Technical Specs Part Number: ACX2086/5 Brand: OEX Type: Manual Reset Circuit Breaker Item Type: Mini Circuit Breaker Breaker Type: Manual Reset Breaker Action: Type 3 (auto-trip, manual reset, switchable) Current Rating: 60A Voltage Rating: 32V DC IP Rating: IP66 Operating Temperature: -40°C to +85°C Housing Material: Thermal plastic UL 94V-0 Dimensions: 58.2mm (H) × 35.7mm (W) × 34.7mm (D) Stud Type: #10-32 threaded Terminal Lug Compatibility: 6mm or ¼ inch Stud Insulators: Included Compliance: SAE J553, SAE J1171, UL1500 (ignition protected) Mount Type: Compact mini surface mount Pack Quantity: 5 units Warranty: 1 year Unit of Measure: Each (pack of 5) Compatible With / Goes Well With 12V and 24V automotive, 4WD, and light commercial vehicle electrical systems (rated to 32V DC) Marine and boat electrical installations requiring ignition-protected circuit breakers (UL1500) Caravan and camper trailer auxiliary electrical systems — dual battery, solar, inverter, and lighting circuits Fuel-system-adjacent applications requiring SAE J1171 ignition protection compliance High-current automotive circuits — winch, compressor, fridge, auxiliary lighting, and audio power feeds Switch panels, firewall installations, and marine electrical boxes requiring compact surface-mount breakers Multi-circuit workshop and fleet installations where consistent breaker specification is required Note: Also available as single units in 10A, 15A, 20A, 30A, 40A, 50A, and 60A. Box-of-5 packs are available in 40A, 50A, and 60A. Confirm your circuit's maximum continuous current draw before selecting the appropriate amperage rating. Weight Not specified by supplier. Frequently Asked Questions What does Type 3 manual reset mean for this circuit breaker? Type 3 means the breaker trips automatically under fault conditions and will not restore the circuit until manually reset by the operator. The switchable function also allows intentional circuit isolation for maintenance or staged commissioning — unlike auto-reset (Type 1) breakers which restore current automatically. Is this breaker suitable for marine and fuel-system installations? Yes — the ACX2086/5 carries UL1500 ignition-protected certification and meets SAE J1171, making it compliant for use in marine bilge areas and fuel-system-adjacent automotive and caravan applications where ignition protection is a safety requirement. What amperage options are available in this pack format? Box-of-5 packs are available in 40A, 50A, and 60A. If you need a different amperage, single-unit options are available across 10A, 15A, 20A, 30A, 40A, 50A, and 60A in the OEX mini circuit breaker range. What terminal lugs are compatible with these breakers? The #10-32 threaded studs accept terminal lugs sized for 6mm or ¼ inch hardware, which are widely available standard sizes across automotive, marine, and electrical supply outlets. Protective stud insulators are included in the pack. Can these breakers be used in both 12V and 24V systems? Yes — the breakers are rated to 32V DC, making them compatible with both 12V and 24V electrical systems found in passenger vehicles, 4WDs, trucks, caravans, and marine applications. Legendary Products & Support From Authorized Dealers When you choose OEX, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized OEX dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by OEX's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Keep your wiring clean, protected, and safe — 100 metres of heavy duty convoluted tubing. Product Overview The OEX ACX1361 is a 100-metre roll of heavy duty convoluted tubing designed for protecting and organising cable runs in automotive, 4WD, caravan, marine, and workshop environments. With a 10mm internal diameter and 12mm external diameter, it accommodates a range of cable sizes and bundles, routing them safely away from heat sources, sharp edges, and moving components. Constructed from fire retardant polypropylene and rated to IP69K, this tubing is built for serious installations — not just cable tidying. Whether you're wiring up a touring 4WD, a work ute, or a caravan, the ACX1361 delivers a clean, professional result that holds up in the harshest Australian conditions. Compatible cable gland: ACX1342. Key Specifications 10mm internal diameter (ID) for single or bundled cable runs 12mm external diameter (OD) 100-metre roll — sufficient for full-vehicle or large-scale caravan wiring installations IP69K environmental rating — resistant to high-pressure, high-temperature wash-down Fire retardant polypropylene construction Heavy duty convoluted sleeve type for flexible yet robust cable management Maximum cable size: 10mm Available in black only Compatible cable gland: OEX ACX1342 1-year OEX warranty Features & Benefits Fire retardant polypropylene — Reduces the risk of heat-related cable damage or fire spread in underbonnet and chassis installations where temperatures spike. A non-negotiable for professional and safety-critical installs. IP69K rated — Withstands high-pressure, high-temperature wash-down, making this tubing suitable for underbody runs, engine bays, and off-road builds that cop a beating through creek crossings, mud, and pressure washing. Heavy duty convoluted design — The ribbed, flexible construction allows the tubing to bend around corners and through tight cable runs without kinking, while providing crush resistance that smooth-wall tubing can't match. 100-metre bulk roll — Enough for a full vehicle loom, a caravan rewire, or a workshop supply. Buy once, use across multiple jobs without running short mid-install. 10mm ID capacity — Handles a wide range of cable gauges and small bundles, making it versatile across automotive audio, auto electrical, 4WD auxiliary, and caravan wiring projects. Stops wires dangling in dangerous areas — Routing cables through convoluted tubing keeps them away from exhaust systems, pulleys, and hot surfaces where exposed wiring can chafe, melt, or cause shorts. Clean professional finish — Produces a factory-quality cable run appearance that's easy to inspect and maintain — ideal for show builds, insurance requirements, and professional installers. Technical Specs Part Number: ACX1361 Brand: OEX Type: Conduit / Sleeving Sleeve Type: Convoluted Tubing Heavy Duty Inside Diameter (ID): 10mm Outside Diameter (OD): 12mm Length: 100m per roll Maximum Cable Size: 10mm Environmental Rating: IP69K Material: Fire retardant polypropylene Colour: Black only Compatible Cable Gland: OEX ACX1342 Weight: 0.2 kg Warranty: 1 year Unit of Measure: Each (1 × 100m roll) Compatible With / Goes Well With Automotive, 4WD, and SUV underbonnet and chassis wiring installations Caravan and camper trailer cable management and rewiring projects Marine and watercraft wiring runs requiring IP-rated protection Auxiliary electrical systems — dual battery, winch, lighting, and compressor wiring Amplifier and subwoofer power cable routing through firewall and chassis Workshop and industrial cable management applications OEX ACX1342 cable gland (recommended for sealed entry/exit points) Note: This tubing accepts cables or bundles up to 10mm in diameter. For larger cable runs, check OEX's broader convoluted tubing range for suitable ID options. Colour is black only — no alternative colours available in this SKU. Weight 0.2 kg per 100m roll. Frequently Asked Questions What size cables will fit through this tubing? The ACX1361 has a 10mm internal diameter, accommodating individual cables or bundled runs up to 10mm in total diameter. Always measure your cable bundle before purchasing to confirm fitment. Is this tubing suitable for underbonnet and engine bay installations? Yes — the fire retardant polypropylene construction and IP69K rating make it well-suited to engine bay, underbonnet, and underbody environments where heat, moisture, and pressure washing are ongoing concerns. What does IP69K mean for this product? IP69K is the highest IP rating for water ingress protection, confirming the tubing can withstand high-pressure, high-temperature water jets. It's the appropriate standard for harsh automotive and off-road environments. Can I cut this tubing to length on-site? Yes — convoluted tubing can be cut with a sharp knife, side cutters, or cable scissors to any required length. The 100-metre roll gives you full flexibility across multiple runs and jobs. What cable gland is compatible with this tubing? OEX recommends the ACX1342 cable gland for use with the ACX1361 tubing where a sealed entry or exit point is required, such as firewall penetrations or enclosure entries. Legendary Products & Support From Authorized Dealers When you choose OEX, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized OEX dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by OEX's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

A reliable momentary switch built tough for 12V and 24V systems. Product Overview The OEX ACX1967BL is a non-illuminated, momentary push button switch designed for 12V and 24V automotive, 4WD, caravan, and commercial vehicle applications. When pressed, it completes a circuit momentarily and returns to the open (off) position when released — making it ideal for triggering horns, solenoids, starter circuits, air lockers, compressors, and other momentary-action accessories. With a 50A power rating, a compact 16mm mounting hole, a 2-terminal SPST configuration, and a weatherproof rubber boot, this switch is built to handle the demands of Australian roads and conditions — from city rigs to remote touring setups and work vehicles. Key Specifications 50A power rating for high-current momentary switching applications 12V and 24V dual-voltage compatibility for cars, 4WDs, trucks, and caravans SPST (Single Pole Single Throw) circuit configuration Momentary On action — circuit closes only while button is depressed 2 terminals for straightforward wiring 16mm panel mounting hole diameter Non-illuminated switch face Waterproof rubber boot included for moisture and dust protection 1-year OEX warranty Features & Benefits Waterproof rubber boot — Shields the switch body from moisture, dust, and mud ingress. A must-have for underbonnet or exterior panel installations where exposure to the elements is unavoidable on Australian tracks and worksites. 50A current capacity — Handles high-draw momentary loads without overheating or voltage drop, giving you confidence when triggering solenoids, horns, air lockers, or starter circuits. 12V and 24V dual-voltage rated — Compatible with both light vehicles and commercial or heavy-duty applications including trucks, buses, and 24V caravan and off-road setups. Momentary action (Off – Momentary On) — Returns to the off state the instant you release it. Ideal for any application that needs a brief, controlled pulse of current rather than a sustained connection. 16mm mounting diameter — A widely used panel cutout size that suits most standard switch panels, dash inserts, and aftermarket enclosures without custom modification. SPST configuration — Simple, single-circuit design keeps wiring clean and straightforward — one input, one output, no switching complexity. Compact, low-profile form — Easy to integrate into tight spaces on centre consoles, dash panels, roll cages, or auxiliary switch plates. Technical Specs Part Number: ACX1967BL Brand: OEX Switch Type: Push Button Switch Action: Off – Momentary On Circuit Configuration: SPST (Single Pole Single Throw) Number of Poles: 1 Number of Positions: 1 Number of Terminals: 2 Power Rating: 50A Voltage: 12V / 24V Mounting Hole: 16mm diameter Illumination: Non-illuminated Waterproofing: Rubber boot included Warranty: 1 year Unit of Measure: Each Compatible With / Goes Well With 12V and 24V passenger vehicles, 4WDs, and SUVs Trucks, buses, and commercial vehicles (24V systems) Caravans and camper trailers with 12V or 24V auxiliary setups Aftermarket switch panels and auxiliary control boxes Air compressor and air locker trigger circuits Horn and solenoid momentary activation circuits Winch remote override or momentary control points CB/UHF radio PTT (push-to-talk) trigger wiring Standard 16mm pre-drilled switch panel cutouts Note: Confirm your panel cutout is 16mm before installation. Not suited for sustained-load (latching) applications — this switch is momentary only and will not hold the circuit open when released. Weight Not specified by supplier. Frequently Asked Questions What is a momentary switch and how does it differ from a standard toggle? A momentary switch only completes the circuit while the button is held down and returns to the open (off) state when released. A standard toggle switch latches in the on position until manually switched off. Will this switch work on both 12V and 24V systems? Yes — the ACX1967BL is dual-voltage rated at 12V and 24V, making it compatible with light vehicles, heavy-duty trucks, buses, and 24V caravan and auxiliary setups. What size hole do I need to mount this switch? You'll need a 16mm diameter panel cutout. This is a common size in aftermarket switch panels, dash inserts, and auxiliary control enclosures and should not require custom drilling in most setups. Is this switch weatherproof or suitable for outdoor panel mounting? The switch includes a waterproof rubber boot that provides moisture and dust protection, making it suitable for underbonnet, exterior panel, and exposed dash installations in Australian conditions. What does SPST mean and how do I wire this switch? SPST stands for Single Pole Single Throw — one input terminal and one output terminal. Connect your power feed to one terminal and your load (horn, solenoid, relay, etc.) to the other. No complex wiring required. Legendary Products & Support From Authorized Dealers When you choose OEX, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized OEX dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by OEX's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

DNA RV103-AI Heavy Duty Compact AHD AI Camera - Commercial-Grade Reversing Camera with Pedestrian Detection Enhance vehicle safety with the DNA RV103-AI heavy duty compact AHD AI camera, featuring advanced artificial intelligence pedestrian detection technology that identifies stationary and moving people up to 10 metres away with audible alerts and dynamic colour-changing on-screen warnings, delivering exceptional 1080P Analogue High Definition image clarity through CMOS sensor with 105° horizontal viewing angle, rugged IP69K waterproof aluminum alloy construction, and adjustable PAL/NTSC system compatibility for commercial-grade vehicle surveillance and reversing applications. Product Overview The DNA RV103-AI represents cutting-edge commercial-grade camera technology that combines Analogue High Definition imaging with sophisticated artificial intelligence pedestrian detection capabilities for enhanced vehicle safety and situational awareness. This rugged camera utilises advanced CMOS image sensor technology delivering crisp 1080P high-resolution visuals through AHD (Analogue High Definition) transmission, providing significantly improved visibility compared to traditional CVBS cameras while maintaining simple analogue installation procedures. The revolutionary AI pedestrian detection system actively monitors the vehicle's surroundings, identifying both stationary and moving people within a 10-metre detection range through sophisticated computer vision algorithms. When pedestrians enter the vehicle's driving or reversing path, the system immediately triggers audible alerts on compatible monitors while displaying dynamic on-screen visual warnings that intelligently change colour as detected persons move closer to the vehicle, providing drivers with clear, immediate, and graduated feedback about pedestrian proximity for enhanced reaction time and accident prevention. The camera features 0.1 LUX low-light sensitivity combined with F1.2 aperture, enabling excellent visibility during dawn, dusk, and nighttime operations when pedestrian detection becomes most critical for commercial vehicle safety. The 105° horizontal viewing angle provides comprehensive rear or side coverage that minimizes blind spots while the 600TV line horizontal resolution ensures sharp detail capture for license plate reading and obstacle identification. Robust IP69K waterproof rating protects against high-pressure water jets, dust ingress, and harsh environmental conditions, making this camera ideal for commercial vehicles, construction equipment, agricultural machinery, and heavy-duty applications exposed to extreme weather and wash-down procedures. The aluminum alloy shell construction provides superior durability against impacts, vibrations, and temperature extremes compared to plastic housings, ensuring long-term reliability in demanding commercial environments. Built-in sun visor reduces glare and lens flare in bright sunlight conditions, maintaining image clarity throughout varied lighting scenarios. The camera supports multiple video formats including 1080P, 720P, and CVBS with PAL/NTSC system adjustability through included control box, providing flexible compatibility with existing monitor installations across international markets. The supplied 0.6m cable with 4-pin water-resistant lockable connector ensures secure connections that resist vibration loosening and moisture ingress. Compact dimensions of just 55mm × 40mm × 49mm (camera only) enable discreet installation in tight mounting locations while the included bracket expands dimensions to 68mm × 57mm × 49mm for secure positioning. The intuitive controller interface allows on-site configuration of video settings, guideline overlays, and system parameters through simple press-key menu navigation with save functionality. Features & Benefits Advanced AI Pedestrian Detection Technology Revolutionary artificial intelligence system actively identifies both stationary and moving pedestrians up to 10 metres away, triggering audible alerts and dynamic colour-changing on-screen warnings that intensify as people approach closer, providing drivers with graduated proximity feedback that enables proactive accident prevention and enhanced situational awareness in commercial vehicle operations. 1080P AHD High-Definition Imaging Delivers exceptional 1080P Analogue High Definition resolution through advanced CMOS sensor technology, providing significantly improved image clarity, detail capture, and visibility compared to traditional CVBS cameras while maintaining simple analogue installation procedures without requiring complex IP networking infrastructure, ensuring professional-grade surveillance quality for commercial applications. Extreme IP69K Waterproof Protection Features robust IP69K waterproof rating that protects against high-pressure water jets, steam cleaning, dust ingress, and harsh environmental conditions, combined with durable aluminum alloy shell construction that withstands impacts, vibrations, and temperature extremes, ensuring reliable long-term operation in demanding commercial, construction, agricultural, and heavy-duty vehicle applications. Superior Low-Light Performance Equipped with 0.1 LUX low-light sensitivity and F1.2 large aperture that enables excellent visibility during dawn, dusk, and nighttime operations when pedestrian detection becomes most critical for safety, maintaining clear image quality and reliable AI detection capabilities throughout varied lighting conditions for 24-hour commercial vehicle operation. Comprehensive 105° Wide-Angle Coverage Provides extensive 105° horizontal viewing angle that minimizes blind spots and delivers comprehensive rear or side area coverage, combined with built-in sun visor that reduces glare and lens flare in bright sunlight, ensuring consistent image clarity and optimal visibility across diverse lighting scenarios for enhanced driver confidence and safety. Flexible System Compatibility and Configuration Supports multiple video formats including 1080P, 720P, and CVBS with adjustable PAL/NTSC system compatibility through included control box, enabling flexible integration with existing monitor installations across international markets, while intuitive controller interface allows on-site configuration of video settings, guideline overlays, and system parameters for customized installation requirements. Technical Specifications Specification Details Brand DNA Model RV103-AI Product Type Heavy Duty AHD AI Camera Image Sensor CMOS Video Output Default AHD 1080P/PAL System Resolution 1080P (Adjustable: 1080P/720P/CVBS) Video System NTSC/PAL Adjustable via Control Box AI Detection Built-in Pedestrian Detection Detection Range Up to 10 Metres Low-Light Sensitivity 0.1 LUX Aperture F1.2 Viewing Angle 105° Horizontal Horizontal Resolution 600TV Line Operating Voltage 12V DC Sun Visor Built Into Casing Shell Material Aluminum Alloy Waterproof Rating IP69K Video Output Signal 1Vp-p 75 Ohm Composite Cable Length 0.6m with 4-Pin Water-Resistant Lockable Connector Camera Dimensions 55mm (W) × 40mm (H) × 49mm (D) Camera & Bracket Dimensions 68mm (W) × 57mm (H) × 49mm (D) Controller Press Key Menu Navigation with Save Function Guideline Settings Press and Hold 3 Seconds to Save/Exit Packaging Box Compatible With Compatible Monitors: AHD-compatible monitors supporting 1080P resolution DNA AHD monitor systems with AI alert support Commercial vehicle monitor systems with audio alert capability Multi-camera AHD DVR recording systems Vehicle Applications: Commercial trucks and delivery vehicles Construction equipment and heavy machinery Agricultural tractors and farming equipment Buses and passenger transport vehicles Caravans and recreational vehicles Fleet vehicles requiring enhanced safety systems Installation Components: DNA AHD extension cables for custom installation lengths 4-pin waterproof extension cables for longer runs Multiple camera switching systems for multi-view setups Professional-grade AHD video distribution amplifiers Power Requirements: 12V DC vehicle electrical systems Commercial vehicle battery systems Isolated power supplies for standalone applications Note: Optimal AI pedestrian detection and alert functionality requires compatible monitor system with audio alert capability and dynamic warning display support. Frequently Asked Questions How does the AI pedestrian detection system work? The advanced AI system uses computer vision algorithms to continuously analyze the camera's video feed, identifying both stationary and moving pedestrians within a 10-metre detection range. When a person is detected in the vehicle's path, the system triggers an audible alert on the compatible monitor and displays a dynamic on-screen visual warning that changes colour as the person moves closer, providing graduated proximity feedback for enhanced driver awareness. What is the difference between AHD and traditional CVBS cameras? AHD (Analogue High Definition) provides significantly higher image resolution (1080P) compared to traditional CVBS cameras, delivering sharper detail, better clarity, and improved ability to identify objects and people. However, AHD maintains the simple analogue installation process without requiring complex IP networking, making it ideal for commercial vehicle upgrades requiring professional image quality with straightforward installation. Can this camera withstand high-pressure washing and harsh weather? Yes, the IP69K waterproof rating provides the highest level of protection against high-pressure water jets, steam cleaning, dust ingress, and extreme weather conditions. The aluminum alloy shell construction offers superior durability against impacts and temperature extremes, making this camera specifically designed for demanding commercial applications including construction sites, agricultural environments, and vehicles requiring regular pressure washing. Is this camera compatible with existing reverse camera monitors? The camera is compatible with AHD-capable monitors that support 1080P resolution. For traditional CVBS monitors, the camera can be configured to output in CVBS mode through the control box, though this will reduce resolution and disable some advanced features. For optimal AI pedestrian detection functionality including colour-changing warnings and audio alerts, a compatible DNA AHD monitor system is recommended. How do I configure the camera settings and guidelines? The included controller provides intuitive menu navigation using press keys and direction controls. Access the menu by pressing the key, navigate through settings using direction keys, then press save to store configuration. For guideline settings specifically, press and hold the key for 3 seconds to save and exit. The control box also allows adjustment of video format (1080P/720P/CVBS) and system type (PAL/NTSC) for compatibility with different monitor systems.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX3210 150A Distribution Block 4 Terminals - Black Simplify electrical system power distribution with the OEX 150A distribution block featuring four M8 terminal connections, 150 amp continuous current capacity, DC48V maximum operating voltage compatibility for 12V/24V systems, stainless steel terminals and nuts for corrosion resistance, tin plated copper bus for optimal conductivity, durable nylon base with clear protective cover, and OEX quality manufacturing standards backed by rigorous Brisbane testing for harsh Australian automotive, marine, and industrial conditions. Product Overview The OEX ACX3210 represents a professional-grade electrical distribution solution that enables organized power distribution from a single input source to multiple output circuits in automotive, marine, RV, and industrial applications. This 4-terminal distribution block provides centralized connection point that simplifies electrical system wiring by allowing one heavy-gauge input cable to feed multiple smaller output circuits through four independent M8 terminal studs, eliminating complex wire splicing and reducing connection points that can cause voltage drop or reliability issues. The 150 amp continuous current capacity accommodates high-power electrical system demands including multiple auxiliary lights, winches, compressors, inverters, and accessory circuits without exceeding safe operating limits, ensuring reliable power distribution across demanding 4WD, commercial vehicle, and work equipment installations. The DC48V maximum operating voltage rating provides universal compatibility across 12V passenger vehicles, 24V commercial trucks and heavy equipment, and 48V specialized systems, enabling installation flexibility without requiring voltage-specific versions for diverse applications. Premium stainless steel terminals and nuts deliver superior corrosion resistance compared to standard steel hardware, ensuring reliable long-term electrical connections in harsh environments exposed to moisture, salt spray, and chemical contaminants common in marine, off-road, and industrial applications. The tin plated copper bus provides optimal electrical conductivity with superior corrosion protection compared to bare copper, minimizing contact resistance and voltage drop while maintaining reliable current distribution across all terminal connections throughout extended service life. The robust nylon base construction offers excellent electrical insulation properties combined with mechanical strength that withstands vibration, impacts, and temperature extremes encountered in automotive and industrial environments. The clear protective cover shields terminal connections from accidental short circuits, debris contamination, and moisture ingress while enabling visual inspection of connection integrity without cover removal, maintaining safety and reliability throughout operation. The compact design enables mounting in tight locations within engine compartments, under-dash areas, equipment enclosures, and vehicle body panels where space constraints limit traditional wiring junction options. Manufactured by ISO 9001 certified OEX partners with rigorous in-house product testing conducted in Brisbane, this distribution block meets stringent engineering, testing, and quality control procedures specifically developed for harsh Australian and New Zealand conditions. OEX's reputation since 1997 for providing highest quality automotive aftermarket parts ensures this distribution block delivers reliable performance across automotive, marine, RV, mining, industrial, and repair specialist applications where organized electrical distribution is essential for system reliability and maintenance accessibility. Features & Benefits 150 Amp Continuous Current Capacity Provides robust 150 amp continuous current rating that accommodates high-power electrical system demands including multiple auxiliary lights, winches, compressors, inverters, and accessory circuits without exceeding safe operating limits, ensuring reliable power distribution across demanding installations where multiple high-current devices draw power simultaneously without voltage drop or overheating concerns. Four M8 Terminal Connections Features four independent M8 terminal studs that enable organized distribution from single input source to multiple output circuits, simplifying electrical system wiring by eliminating complex wire splicing and reducing connection points, while providing sufficient terminal quantity for typical auxiliary electrical system requirements without requiring multiple distribution blocks for organized installation. Stainless Steel Terminals and Hardware Utilizes premium stainless steel terminals and nuts that deliver superior corrosion resistance compared to standard steel hardware, ensuring reliable long-term electrical connections in harsh marine, off-road, and industrial environments exposed to moisture, salt spray, and chemical contaminants without terminal degradation that compromises connection integrity or requires frequent maintenance. Tin Plated Copper Bus Construction Features tin plated copper bus that provides optimal electrical conductivity with superior corrosion protection compared to bare copper, minimizing contact resistance and voltage drop while maintaining reliable current distribution across all terminal connections throughout extended service life, ensuring maximum electrical efficiency and preventing power loss across distribution points. Durable Nylon Base with Clear Cover Incorporates robust nylon base offering excellent electrical insulation properties combined with mechanical strength that withstands vibration and impacts, protected by clear cover that shields terminal connections from accidental short circuits, debris contamination, and moisture ingress while enabling visual inspection of connection integrity without cover removal for safety and reliability. DC48V Voltage Compatibility Supports maximum operating voltage up to DC48V providing universal compatibility across 12V passenger vehicles, 24V commercial trucks and heavy equipment, and 48V specialized systems, enabling installation flexibility without requiring voltage-specific versions for diverse automotive, marine, RV, and industrial applications with varying electrical system voltages. Technical Specifications Specification Details Brand OEX Model ACX3210 Product Type Electrical Distribution Block Color Black Max Continuous Current 150 Amps Max Operating Voltage DC48V Voltage Compatibility 12V, 24V, 48V DC Systems Number of Terminals 4 Terminal Stud Size M8 (All Terminals) Terminal Material Stainless Steel Hardware Material Stainless Steel Nuts Bus Material Tin Plated Copper Base Material Nylon Cover Clear Protective Cover Corrosion Resistance Stainless Steel and Tin Plated Mounting Type Surface Mount (Nylon Base) Manufacturing Standards ISO 9001 Certified Testing Location In-house Brisbane, Australia Compatible With Vehicle Applications: 4WD and off-road vehicles (12V auxiliary systems) Passenger vehicles and SUVs (12V accessory distribution) Utes and pickup trucks (12V auxiliary lighting and equipment) Commercial trucks and delivery vehicles (12V/24V systems) Heavy equipment and machinery (24V electrical systems) Mining vehicles (24V/48V specialized systems) Agricultural machinery and tractors (12V/24V systems) Construction equipment (12V/24V/48V systems) Caravans and RVs (12V house electrical systems) Marine vessels and boats (12V/24V electrical systems) Electrical System Applications: Auxiliary lighting circuits (LED light bars, work lights) Winch power distribution Air compressor connections Inverter power feeds Refrigerator and appliance circuits Communication equipment power Audio system distribution Accessory circuit organization Battery isolation system connections Solar panel controller distribution Industry Applications: Automotive aftermarket installations Marine electrical systems RV and caravan house systems Mining equipment electrical Industrial machinery power distribution Agricultural equipment electrical Construction equipment systems Emergency and rescue vehicle electrical Mobile workshop equipment Cable Gauge Compatibility (M8 Terminals): 8 AWG (8.4mm²) cables 6 AWG (13.3mm²) cables 4 AWG (21.1mm²) cables Appropriate cable terminal lugs required for M8 stud connection Frequently Asked Questions What is the purpose of a distribution block? A distribution block simplifies electrical system wiring by allowing one heavy-gauge input cable from the battery or main power source to feed multiple smaller output circuits through independent terminals. This eliminates complex wire splicing, reduces connection points that can cause problems, and provides organized centralized power distribution for auxiliary lights, accessories, and equipment without running multiple heavy cables from the battery. What size cables can I connect to the M8 terminal studs? M8 terminal studs accommodate cables from 8 AWG (8.4mm²) up to 4 AWG (21.1mm²) when using appropriate cable terminal lugs. For 150 amp applications, use appropriately sized cables for the current load on each circuit - typically 8-10 AWG for circuits under 40 amps, 6 AWG for circuits up to 60 amps, and 4 AWG for higher current applications or longer cable runs to minimize voltage drop. Can I use this distribution block on both 12V and 24V systems? Yes, the DC48V maximum operating voltage rating makes this distribution block compatible with 12V passenger vehicles, 24V commercial trucks and heavy equipment, and even 48V specialized systems. The voltage rating indicates the maximum voltage the insulation can safely handle, so it works across all common automotive and industrial DC voltage systems. How do I properly install and protect this distribution block? Mount the distribution block in a location protected from direct water spray and excessive heat, ensuring the nylon base is securely fastened. Connect the input cable from your fused power source to one terminal, then connect output circuits to remaining terminals. Always install appropriate fuse or circuit breaker protection between the battery and distribution block input, and fuse each output circuit appropriately for the connected load and cable gauge. What makes OEX distribution blocks suitable for harsh Australian conditions? OEX conducts rigorous in-house product testing in Brisbane specifically for Australian conditions. The stainless steel terminals and tin plated copper bus provide superior corrosion resistance against moisture, salt spray, and environmental exposure. The nylon base and clear cover protect connections from debris and moisture while maintaining electrical safety. ISO 9001 certified manufacturing ensures reliable performance in demanding automotive, marine, and industrial applications.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0035 Single Firewall Bulkhead Stud Route high-current cables cleanly and safely through firewalls and bulkheads with the OEX ACX0035 Single Firewall Bulkhead Stud, featuring two 3/8-16 thread brass stud terminals, 250A continuous rating, 48V DC maximum operating voltage, impact-resistant plastic insulator and mounting bush, stainless nuts, 10mm brass bolts, a compact 15.9mm length, and a 32mm diameter mounting hole for clean, professional cable pass-through in automotive, marine, 4WD, caravan, RV, and commercial vehicle electrical installations. Product Overview The OEX ACX0035 is a single firewall bulkhead stud designed to provide a clean, insulated, and rated cable pass-through point for routing high-current positive or negative cables through metal firewalls, bulkheads, chassis rails, battery enclosure walls, and custom electrical panels. In professional automotive and marine electrical builds, passing a bare cable through a hole in a metal panel creates a significant risk of cable chafing, insulation damage, and short circuits where the cable contacts the sharp panel edge. The ACX0035 eliminates this risk by providing an insulated, panel-mounted stud terminal that separates the cable connection point from the metal panel surface, with the impact-resistant plastic insulator and mounting bush providing full electrical isolation between the stud and the surrounding metalwork. The dual 3/8-16 thread brass stud terminals allow cables to be connected on both sides of the firewall or bulkhead, creating a secure, rated electrical connection point that passes current through the panel without any bare cable penetrating the metal. This is particularly important in engine bay to cabin builds, battery box to accessory panel wiring, marine bulkhead cable routing, and any installation where a high-current cable needs to cross a metal barrier cleanly and safely. The 32mm diameter mounting hole suits standard hole saw sizes available at most hardware stores, making installation straightforward without specialist tooling. Rated to 250A continuous and 48V DC maximum, the ACX0035 handles the demands of high-current 12V and 24V automotive and marine electrical systems including large inverters, amplifier main feeds, dual battery cables, and commercial vehicle auxiliary circuits. The compact 15.9mm body length suits typical automotive panel thicknesses without excessive protrusion on either side. ISO 9001-certified manufacturing and in-house testing at OEX's Brisbane facility ensures consistent quality and long-term reliability. Features & Benefits Clean Insulated Cable Pass-Through for Firewalls and Bulkheads: Provides a fully insulated, panel-mounted terminal point for routing high-current cables through metal firewalls and bulkheads, eliminating the risk of cable chafing, insulation damage, and short circuits where bare cables contact sharp metal panel edges in professional electrical builds. Impact-Resistant Plastic Insulator and Mounting Bush: The impact-resistant plastic insulator and mounting bush provide full electrical isolation between the stud terminals and the surrounding metalwork, ensuring no continuity between the live stud and the vehicle chassis or panel regardless of installation location or vibration. 250A Continuous / 48V DC Rating: Rated to 250A continuous and 48V DC maximum, the ACX0035 handles the high current demands of large inverter feeds, amplifier main power cables, dual battery runs, and commercial vehicle auxiliary circuits in both 12V and 24V electrical systems. 2 x 3/8-16 Thread Brass Stud Terminals: Dual 3/8-16 thread brass stud terminals on both sides of the panel allow cables to be terminated cleanly on the engine bay side and the cabin side, creating a secure, rated connection point that passes current through the panel without bare cable penetration. Stainless Nuts and 10mm Brass Bolts for Reliable Connections: Stainless steel nuts combined with 10mm brass bolts provide corrosion-resistant, vibration-resistant clamping at both connection points, maintaining reliable electrical contact under the thermal cycling and mechanical vibration common in automotive and marine installations. 32mm Diameter Mounting Hole for Standard Tooling: The 32mm mounting hole suits standard hole saw sizes readily available at hardware stores, making installation straightforward without specialist tooling and ensuring a clean, professional finish on the panel surface. Compact 15.9mm Body Length for Neat Installation: The short 15.9mm body length suits standard automotive panel thicknesses, minimising protrusion on both sides of the firewall or bulkhead for a neat, low-profile installation that does not interfere with surrounding components. ISO 9001 Certified Manufacturing: Produced under ISO 9001 quality management certification with in-house product testing at OEX's Brisbane facility, ensuring consistent quality and long-term reliability across automotive, marine, RV, mining, and commercial vehicle applications. Technical Specs Specification Details Part Number ACX0035 Brand OEX Type Single Firewall Bulkhead Stud Max Operating Voltage 48V DC Continuous Rating 250A Stud Terminals 2 x 3/8-16 Thread Brass Nuts Stainless Steel Bolts 10mm Brass Insulator / Mounting Bush Impact-Resistant Plastic Body Length 15.9mm Mounting Hole Diameter 32mm Warranty 1 Year Quality Certification ISO 9001 Compatible With / Goes Well With The OEX ACX0035 suits 12V and 24V automotive, marine, caravan, RV, 4WD, commercial vehicle, and mining support vehicle applications requiring a clean, insulated, 250A-rated cable pass-through point through metal firewalls, bulkheads, chassis rails, battery box walls, and custom electrical panels. Ideal for engine bay to cabin positive cable routing, battery box to accessory panel wiring, marine bulkhead cable pass-through, and any installation where a high-current cable needs to cross a metal barrier safely. Compatible with standard cable lugs for 3/8-16 thread studs across a range of heavy gauge wire sizes. Pairs with OEX battery terminals, distribution blocks, ANL fuse holders, and bulkhead connector accessories for a complete professional wiring solution. Frequently Asked Questions What is a firewall bulkhead stud and why is it needed? A firewall bulkhead stud provides an insulated, panel-mounted terminal point for routing high-current cables through metal panels such as firewalls and bulkheads. Without a bulkhead stud, a bare cable passing through a hole in a metal panel risks chafing against the sharp edge, damaging the insulation, and causing a short circuit to the chassis. The ACX0035 eliminates this risk by providing an insulated pass-through terminal that isolates the live conductor from the surrounding metalwork at the panel penetration point. Can the ACX0035 be used for both positive and negative cables? Yes. The ACX0035 is a single bulkhead stud suitable for either a positive or negative cable pass-through. For installations requiring both positive and negative cables to pass through the same panel, two ACX0035 units should be installed side by side with adequate separation between them to prevent accidental contact between the two live terminals. What size hole saw is needed to install the ACX0035? The ACX0035 requires a 32mm diameter mounting hole, which suits a standard 32mm hole saw available at most hardware stores. Drill the hole in the centre of the intended mounting location, deburr the edges thoroughly, and test-fit the mounting bush before final installation. What cable lugs are compatible with the 3/8-16 thread studs? The 3/8-16 thread brass studs accept standard cable lugs with a 3/8" hole, available across a range of wire gauge sizes from light accessory wire through to heavy gauge cables used in 250A-rated automotive and marine applications. Always use correctly sized, properly crimped compression lugs matched to the wire gauge of each circuit. Is the ACX0035 suitable for marine bulkhead installations? The brass stud construction and impact-resistant plastic insulator provide good corrosion resistance and electrical isolation suitable for marine bulkhead applications. For best long-term performance in marine environments, apply marine-grade sealant around the mounting bush perimeter during installation to prevent water ingress through the panel hole, and use tinned copper cable lugs with dielectric grease on all contact surfaces.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0034 Single Firewall & Bulkhead Stud - Black Route negative and earth cables cleanly and safely through firewalls and bulkheads with the OEX ACX0034 Single Firewall Bulkhead Stud, featuring two 3/8-16 thread brass stud terminals, 250A continuous rating, 48V DC maximum operating voltage, impact-resistant plastic insulator and mounting bush, glass-filled nylon base, stainless nuts, 10mm brass bolts, a compact 15.9mm length, and a 32mm diameter mounting hole for clean, professional negative cable pass-through in automotive, marine, 4WD, caravan, RV, and commercial vehicle electrical installations. Product Overview The OEX ACX0034 is the black-coded negative/earth variant of the OEX single firewall bulkhead stud range, providing a clean, insulated, and rated cable pass-through point for routing high-current negative or earth cables through metal firewalls, bulkheads, chassis rails, battery enclosure walls, and custom electrical panels. Paired with the ACX0035, the ACX0034 forms a complete colour-coded positive and negative bulkhead stud pair, allowing both the main positive and negative cables to pass cleanly through the same panel at properly rated, insulated, and identified connection points. This dual bulkhead stud approach is the professional solution for engine bay to cabin battery cable routing, battery box to accessory panel wiring, marine compartment bulkhead penetrations, and any custom build where both positive and negative cables need to cross a metal barrier cleanly without bare cable contact with the surrounding metalwork. The impact-resistant plastic insulator and mounting bush provide full electrical isolation between the stud and the surrounding metalwork, while the glass-filled nylon base delivers superior strength and heat resistance over standard nylon for reliable long-term performance in demanding installation environments. The dual 3/8-16 thread brass stud terminals allow cables to be terminated securely on both sides of the panel, with stainless steel nuts and 10mm brass bolts providing corrosion-resistant clamping that withstands automotive vibration and thermal cycling. Rated to 250A continuous and 48V DC maximum, the ACX0034 handles the demands of high-current 12V and 24V electrical systems. The compact 15.9mm body length suits standard automotive panel thicknesses, and the 32mm mounting hole suits standard hole saw sizes for straightforward installation. ISO 9001-certified manufacturing and in-house testing at OEX's Brisbane facility ensures consistent quality and long-term reliability. Features & Benefits Clean Insulated Negative Cable Pass-Through for Firewalls and Bulkheads: Provides a fully insulated, panel-mounted terminal point for routing high-current negative and earth cables through metal firewalls and bulkheads, eliminating the risk of cable chafing, insulation damage, and short circuits at metal panel penetration points in professional electrical builds. Impact-Resistant Plastic Insulator and Mounting Bush: The impact-resistant plastic insulator and mounting bush provide full electrical isolation between the stud terminals and the surrounding metalwork, ensuring no continuity between the negative stud and the vehicle chassis or panel regardless of installation location or vibration. Glass-Filled Nylon Base for Superior Strength and Heat Resistance: Glass-filled nylon construction provides significantly greater rigidity, impact resistance, and thermal stability compared to standard nylon, resisting deformation and cracking under sustained load and elevated temperatures in engine bays, battery compartments, and industrial equipment enclosures. 250A Continuous / 48V DC Rating: Rated to 250A continuous and 48V DC maximum, the ACX0034 handles the high current demands of large inverter earth cables, amplifier main earth runs, dual battery negative cables, and commercial vehicle auxiliary earth circuits in both 12V and 24V electrical systems. 2 x 3/8-16 Thread Brass Stud Terminals: Dual 3/8-16 thread brass stud terminals on both sides of the panel allow earth cables to be terminated cleanly on both the engine bay side and the cabin side, creating a secure, rated connection point that passes negative current through the panel without bare cable penetration. Stainless Nuts and 10mm Brass Bolts for Reliable Connections: Stainless steel nuts combined with 10mm brass bolts provide corrosion-resistant, vibration-resistant clamping at both connection points, maintaining reliable electrical contact under thermal cycling and mechanical vibration common in automotive and marine installations. Black Colour for Negative/Earth Identification: The black colour coding provides instant identification as a negative or earth terminal, reducing polarity errors in installations where both positive and negative bulkhead studs are mounted side by side on the same panel. 32mm Diameter Mounting Hole for Standard Tooling: The 32mm mounting hole suits standard hole saw sizes readily available at hardware stores, making installation straightforward without specialist tooling and ensuring a clean, professional finish on the panel surface. ISO 9001 Certified Manufacturing: Produced under ISO 9001 quality management certification with in-house product testing at OEX's Brisbane facility, ensuring consistent quality and long-term reliability across automotive, marine, RV, mining, and commercial vehicle applications. Technical Specs Specification Details Part Number ACX0034 Brand OEX Type Single Firewall Bulkhead Stud Colour Black Max Operating Voltage 48V DC Continuous Rating 250A Stud Terminals 2 x 3/8-16 Thread Brass Nuts Stainless Steel Bolts 10mm Brass Insulator / Mounting Bush Impact-Resistant Plastic Base Material Glass-Filled Nylon Terminal Material Brass Body Length 15.9mm Mounting Hole Diameter 32mm Pack Quantity 1 Weight 0.107kg Warranty 1 Year Quality Certification ISO 9001 Compatible With / Goes Well With The OEX ACX0034 suits 12V and 24V automotive, marine, caravan, RV, 4WD, commercial vehicle, and mining support vehicle applications requiring a clean, insulated, 250A-rated negative cable pass-through point through metal firewalls, bulkheads, chassis rails, battery box walls, and custom electrical panels. Ideal for engine bay to cabin negative cable routing, battery box to accessory panel earth wiring, marine bulkhead negative cable pass-through, and any installation where a high-current earth cable needs to cross a metal barrier safely. Pairs directly with the OEX ACX0035 red positive bulkhead stud for a complete colour-coded positive and negative bulkhead stud pair. Compatible with standard cable lugs for 3/8-16 thread studs across a range of heavy gauge wire sizes. Frequently Asked Questions What is the difference between the ACX0034 and the ACX0035? The ACX0034 is the black-coded negative/earth variant and the ACX0035 is the red-coded positive variant. Both share identical specifications including 250A continuous rating, 48V DC maximum, dual 3/8-16 brass stud terminals, 15.9mm body length, and 32mm mounting hole. The ACX0034 additionally features a glass-filled nylon base. Use the ACX0035 for the positive cable pass-through and the ACX0034 for the negative/earth cable pass-through to form a complete, colour-coded bulkhead stud pair. How far apart should the ACX0034 and ACX0035 be mounted when installed as a pair? When installing both positive and negative bulkhead studs side by side, maintain sufficient separation to prevent accidental contact between the exposed stud terminals on either side of the panel. A minimum of 40 to 50mm centre-to-centre spacing is recommended as good practice, though the exact spacing depends on the cable lug sizes used and whether protective covers are fitted to the studs. What size hole saw is needed to install the ACX0034? The ACX0034 requires a 32mm diameter mounting hole, which suits a standard 32mm hole saw available at most hardware stores. Drill the hole in the intended mounting location, deburr the edges thoroughly, and test-fit the mounting bush before final installation to ensure a clean, tight fit. What cable lugs are compatible with the 3/8-16 thread studs? The 3/8-16 thread brass studs accept standard cable lugs with a 3/8" hole, available across a range of wire gauge sizes from light accessory wire through to heavy gauge cables used in 250A-rated automotive and marine applications. Always use correctly sized, properly crimped compression lugs matched to the wire gauge of each circuit. Is the ACX0034 suitable for marine bulkhead installations? The brass stud construction, impact-resistant plastic insulator, and glass-filled nylon base provide good corrosion resistance and electrical isolation suitable for marine bulkhead applications. For best long-term performance in marine environments, apply marine-grade sealant around the mounting bush perimeter during installation to prevent water ingress through the panel hole, and use tinned copper cable lugs with dielectric grease on all contact surfaces.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

DNA RVM72 7-Inch AHD 2 Channel Rear View TFT-LCD Monitor Professional-grade 7 inch AHD rear view mirror monitor featuring two independent camera inputs with triggered activation enabling comprehensive dual-camera vehicle safety and visibility systems for cars, SUVs, trucks, and commercial vehicle applications. The DNA RVM72 mirror-style monitor combines non-reflective TFT-LCD display technology with OEM-inspired mirror housing delivering clear, stable video monitoring across two independent camera channels with split display view configuration. This versatile monitoring solution supports both CCD and AHD camera technologies with automatic PAL/NTSC video system detection, touch button controls, IR remote operation, and flexible installation options through clip-on mirror mount or bracket mounting systems. Operating across 12-24V electrical systems with water-resistant lockable camera connections, this professional monitoring solution delivers reliable dual-camera visibility for enhanced parking safety, front and rear monitoring, and comprehensive vehicle visibility across diverse passenger and commercial vehicle applications. Product Overview Upgrade your driving visibility with this 7-inch AHD TFT-LCD rear view monitor, designed in a mirror-style housing with non-reflective display for a sleek, factory-fit look. Ideal for cars, SUVs, trucks, and commercial vehicles, this monitor delivers a wide 16:9 image and flexible viewing options for safer driving and parking. Dual-Camera System Architecture: The monitor supports split display view, allowing you to customize how your camera feeds are shown. With dual video inputs and trigger support, it's perfect for rear and front cameras or additional safety systems enabling simultaneous monitoring of multiple vehicle perspectives. Flexible Installation Options: Installation is simple and versatile thanks to two mounting options: a clip-on style that fits over most existing rear-view mirrors, or a bracket mount for dashboard or custom installations. Supporting automatic PAL and NTSC video systems and compatible with 12-24V electrical systems, this monitor is compatible with a broad range of vehicles. Features & Benefits Comprehensive Dual-Camera Monitoring System Professional two-channel video monitoring system enables simultaneous connection of rear and front cameras or rear camera with auxiliary side-view camera providing enhanced vehicle visibility. The two independent trigger inputs allow automatic camera activation based on vehicle operation including reverse gear engagement or manual camera selection through touch controls or IR remote ensuring relevant camera views display automatically during critical maneuvering operations. Split Display View Configuration Advanced display processing supports split display view configuration enabling simultaneous viewing of both camera feeds or single camera full-screen display. This display flexibility enables operators to monitor multiple vehicle perspectives simultaneously during complex maneuvering operations or parking maneuvers ensuring comprehensive visibility during critical driving situations. AHD High-Definition Camera Support Advanced AHD (Analog High Definition) technology support enables connection of high-resolution AHD cameras delivering superior image quality compared to traditional analog camera systems. Backward compatibility with standard CCD analog cameras ensures flexibility during system upgrades or mixed camera installations while automatic PAL/NTSC video system detection eliminates configuration requirements across international vehicle applications. OEM-Style Mirror Housing with Non-Reflective Display Professional mirror-style housing design integrates seamlessly with factory vehicle interiors providing clean OEM-inspired appearance. The non-reflective 7-inch TFT-LCD display eliminates glare and reflection issues common with traditional mirror monitors ensuring clear video visibility under all lighting conditions while maintaining traditional rear-view mirror functionality when the display is inactive. Versatile Mounting and Installation Options Dual mounting system provides installation flexibility through clip-on mirror bracket compatible with most Toyota, Mitsubishi, Nissan, and Holden factory rear-view mirrors, or bracket mount option for dashboard, overhead, or custom mounting locations. Water-resistant lockable 4-pin camera connections ensure secure weatherproof cable connections while 12-24V wide operating voltage range supports installation across passenger vehicles, commercial trucks, and light commercial vehicles. Professional Control Interface with Auto-Dimming Touch button control panel and included IR remote control provide convenient operation of camera selection, display configuration, and system settings without dashboard modification. Integrated auto-dimming function automatically adjusts display brightness based on ambient lighting conditions reducing eye strain during night driving while maintaining optimal video visibility during daytime operations. Technical Specifications Specification Details Product Code RVM72 SKU RVM72 Brand DNA Display Type 7-inch AHD TFT-LCD Screen Size 7 inches diagonal Aspect Ratio 16:9 widescreen Resolution 1024 (RGB) x 600 pixels Video System Auto PAL & NTSC detection Camera Inputs 2 independent video inputs Trigger Inputs 2 independent trigger wires (one per camera) Display Views Split display view and single camera full-screen Camera Compatibility CCD analog cameras and AHD high-definition cameras Camera Connections 4-pin water-resistant lockable connectors Control Interface Touch button controls and IR remote control Operating Voltage 12-24V DC wide voltage range Auto-Dimming Automatic brightness adjustment based on ambient light Mounting Options Clip-on mirror bracket or bracket mount Mirror Bracket Compatibility Most Toyota, Mitsubishi, Nissan, and Holden vehicles Dimensions 220mm W x 106mm H x 25.6mm D Packaging Display box Country of Origin Designed for Australian market compliance Compatible With Vehicle Applications: Passenger Cars and Sedans SUVs and Crossovers Light Trucks and Utes Light Commercial Vehicles Delivery Vans 4WD Vehicles Caravans and Motorhomes Any vehicle requiring front and rear camera monitoring Camera System Compatibility: AHD High-Definition Backup Cameras CCD Analog Backup Cameras Front-View Parking Cameras Rear-View Reversing Cameras Any 4-pin video camera with PAL or NTSC output Ideal Applications: Rear reversing and parking assistance Front bumper parking assistance Dual-perspective vehicle monitoring Caravan and trailer coupling Enhanced visibility for larger vehicles Commercial fleet safety compliance Frequently Asked Questions Q: How many cameras can be connected to this monitor? The DNA RVM72 supports two independent camera inputs with two separate trigger wires enabling simultaneous connection of front and rear cameras or rear camera with auxiliary side-view camera. Each camera input features independent trigger activation allowing automatic camera display switching based on vehicle operation such as reverse gear engagement. The monitor supports split display view for simultaneous monitoring or single camera full-screen display for focused viewing. Q: Will this monitor work with both AHD high-definition cameras and standard analog cameras? Yes, the DNA RVM72 supports both AHD (Analog High Definition) cameras and traditional CCD analog cameras providing installation flexibility. AHD camera support enables high-resolution video monitoring with superior image quality compared to standard analog systems, while backward compatibility with CCD cameras ensures compatibility with existing camera installations. The monitor automatically detects PAL or NTSC video systems eliminating manual configuration requirements. Q: What mounting options are available and how does the clip-on mirror mount work? The DNA RVM72 includes two mounting options: a clip-on mirror-style bracket that attaches over most factory rear-view mirrors (compatible with most Toyota, Mitsubishi, Nissan, and Holden vehicles), or a bracket mount suitable for dashboard, overhead, or custom mounting locations. The clip-on mirror bracket provides quick installation without removing the factory mirror, while the bracket mount option offers flexible positioning for various vehicle applications. Q: Can this monitor operate in both 12V and 24V vehicle electrical systems? Yes, the DNA RVM72 features a wide 12-24V DC operating voltage range making it compatible with both passenger vehicle 12V electrical systems and light commercial vehicle 24V electrical systems. This wide voltage compatibility ensures installation flexibility across diverse vehicle applications from passenger cars and SUVs to light commercial vehicles and delivery vans without requiring voltage converters. Q: How are the cameras activated and can I manually switch between camera views? Cameras can be activated automatically through two independent trigger wires connected to vehicle circuits (such as reverse gear or ignition accessories) enabling automatic camera switching based on vehicle operation. Additionally, manual camera selection and display configuration is available through touch button controls on the monitor housing or via the included IR remote control allowing operators to manually select specific camera views or split-screen display as needed during operation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less