Classic Truck-Style Red LED Rear Marker Chrome Bracket, ADR 49/00, IP67, Clip-In Lens. Product Overview The LED Autolamps 42RM is a red LED rear end outline marker light in the classic truck style, featuring a chrome bracket, polycarbonate clip-in lens, and a clear lens design with internal red LEDs. Measuring 74mm x 38mm x 35mm with a 28.5mm bolt hole spacing, the 42RM is a widely used rear and side marker lamp for trailers, caravans, trucks, and commercial vehicles across Australia. ADR approved under Category 49/00 (CRN 42839) and IP67 rated for complete weatherproof protection, the 42RM operates on both 12V and 24V systems with a minimal current draw of just 0.05A at 12V. The clip-in lens design allows lens replacement without removing the bracket, and the 16cm cable provides a practical lead length for most mounting locations. Supplied as a single unit in blister packaging, with the chrome bracket version (42RM) distinguishing it from the black bracket alternative (42RMB). Key Specifications Function: Rear end outline / marker light LED colour: Red Lens: Clear polycarbonate clip-in Bracket: Chrome Dimensions: 74mm x 38mm x 35mm Bolt hole spacing: 28.5mm Cable length: 16cm Mount type: Surface mount (horizontal bracket) IP rating: IP67 Input voltage: 12–24V DC (multivolt) Current draw: 0.05A @ 13.8V / 0.06A @ 28V Compliance: ADR 49/00 CRN 42839 Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 42RM Features & Benefits Classic truck style: The 42RM is one of the most widely used rear marker lamp form factors on Australian trucks and trailers, fitting standard marker positions across a broad range of vehicle types Chrome bracket: Premium chrome finish bracket suits traditional trailer and truck builds; the black bracket alternative (42RMB) is available for those preferring a darker aesthetic Polycarbonate clip-in lens: The replaceable clip-in lens allows lens swap without removing the bracket, simplifying maintenance on working vehicles Clear lens with internal red LEDs: Modern LED design maintains colour accuracy and brightness without lens discolouration from UV exposure over time ADR 49/00 approved CRN 42839: Fully compliant with Australian Design Rules for rear end outline markers on trailers and commercial vehicles IP67 weatherproof: Completely dust-proof and protected against temporary water immersion for reliable outdoor performance in all Australian conditions Ultra-low current draw: Just 0.05A at 12V, placing minimal load on the vehicle's electrical system and extending LED lifespan 12V and 24V compatible: Multivolt operation suits passenger and caravan trailers through to 24V heavy commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 42RM Brand LED Autolamps Function Rear End Outline / Marker Light LED Colour Red Lens Clear polycarbonate clip-in Bracket Colour Chrome Dimensions 74mm x 38mm x 35mm Bolt Hole Spacing 28.5mm Cable Length 16cm Mount Type Surface mount horizontal bracket IP Rating IP67 Input Voltage 12–24V DC (multivolt) Current Draw 0.05A @ 13.8V / 0.06A @ 28V ADR Compliance ADR 49/00 CRN 42839 Warranty 5 Years Packaging Blister Pack single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR-compliant rear end marker lighting including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Horse floats and livestock trailers Pairs well with: LED Autolamps MAXILAMPC3XR stop/tail/indicator combination lamp LED Autolamps 35CARM red/amber side marker LED Autolamps 7030R red self-adhesive reflectors Frequently Asked Questions What is the difference between the 42RM and the 42RMB? The 42RM has a chrome bracket while the 42RMB has a black bracket. Both are otherwise identical in function, dimensions, LED colour, and specifications. Choose based on your preferred bracket finish. Is this lamp ADR approved for Australian road use? Yes the 42RM is ADR approved under Category 49/00 with CRN 42839, confirming it meets Australian legal requirements for rear end outline markers on trailers and commercial vehicles. Can the lens be replaced without removing the bracket? Yes the clip-in lens design allows lens replacement without removing the bracket from the mounting surface, making maintenance on installed units straightforward. What is the current draw of this lamp? The 42RM draws just 0.05A at 13.8V (12V system) and 0.06A at 28V (24V system), placing minimal load on the vehicle's electrical system. What is the bolt hole spacing for mounting? The centre-to-centre distance between the two mounting bolt holes is 28.5mm. Confirm this suits your mounting surface before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Five-Function ADR-Approved Combination Lamp Stop, Tail, Indicator, Reverse & Reflector in Black Chrome. Product Overview The LED Autolamps MAXILAMPC3XRWB is a five-function LED combination lamp delivering stop, tail, indicator, reverse, and reflector functions in a single surface-mount unit with a black chrome housing finish. An upgrade from the four-function MAXILAMPC3XR, the addition of a dedicated reverse light makes this lamp ideal for trailers, caravans, trucks, and commercial vehicles where all five functions are required in one compact assembly. Compatible with both 12V and 24V systems, ADR road approved, and ECE certified (CTA040963), the MAXILAMPC3XRWB meets Australian legal requirements for road use across all confirmed functions. Measuring 370mm x 135mm x 40mm the same footprint as the MAXILAMPC3XR the MAXILAMPC3XRWB is IP67 rated for full weatherproof protection and backed by LED Autolamps' industry-leading 7-year warranty. Supplied individually in box packaging. Key Specifications Functions: Stop, tail, indicator, reverse, reflector Voltage: 12V or 24V Housing colour: Black chrome IP rating: IP67 Compliance: ADR approved, ECE certified CTA040963 Warranty: 7 years Dimensions: 370mm x 135mm x 40mm Mount type: Surface mount Light type: LED Weight: 1.25kg Packaging: Box single unit Brand: LED Autolamps SKU: MAXILAMPC3XRWB Features & Benefits Five-function combination lamp: Combines stop, tail, indicator, reverse, and reflector functions in a single lamp unit, simplifying wiring and reducing the number of separate lamp assemblies required on the vehicle Reverse light included: The addition of a dedicated reverse function distinguishes the MAXILAMPC3XRWB from the four-function MAXILAMPC3XR, making it suitable for applications requiring all five rear lighting functions in one unit ADR and ECE approved: Fully compliant with Australian Design Rules and ECE certification (CTA040963) for legal road use across all five lamp functions Black chrome housing: Premium black chrome face finish suits modern trailer and commercial vehicle builds requiring a sleek, professional lamp aesthetic 12V and 24V compatible: Operates on both 12V and 24V systems, making it suitable for passenger vehicle trailers, caravans, and heavy commercial trucks IP67 weatherproof: Fully protected against dust ingress and temporary water immersion, reliable in demanding Australian road conditions year-round LED technology: Longer lifespan, lower power draw, and faster response time compared to traditional incandescent trailer lamps 7-year warranty: LED Autolamps' industry-leading 7-year warranty reflects the long-term reliability of this premium combination lamp Same footprint as MAXILAMPC3XR: Drop-in dimensional compatibility with the four-function MAXILAMPC3XR for vehicles upgrading to five-function coverage without structural modification Technical Specs Specification Detail SKU MAXILAMPC3XRWB Brand LED Autolamps Functions Stop, Tail, Indicator, Reverse, Reflector Light Type LED Voltage 12V or 24V Housing Colour Black Chrome IP Rating IP67 Compliance ADR Approved, ECE CTA040963 Warranty 7 Years Dimensions 370mm x 135mm x 40mm Mount Type Surface Mount Weight 1.25kg Packaging Box single unit Outer Carton Quantity 10 Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR-approved five-function combination lamps including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Pairs well with: LED Autolamps 35CARM red/amber side marker LED Autolamps 42RM red LED rear marker LED Autolamps 7030R red self-adhesive reflectors Frequently Asked Questions What is the difference between the MAXILAMPC3XRWB and the MAXILAMPC3XR? The MAXILAMPC3XRWB adds a dedicated reverse light function to the four-function MAXILAMPC3XR (stop/tail/indicator/reflector). Both share the same black chrome housing and 370mm x 135mm x 40mm footprint, making the MAXILAMPC3XRWB a direct five-function upgrade for trailers requiring reverse light capability. Is this lamp ADR approved for Australian road use? Yes the MAXILAMPC3XRWB is ADR road approved and ECE certified (CTA040963), confirming it meets Australian legal requirements for road use across all five lamp functions. How many units are supplied in this pack? This product is supplied as a single unit in box packaging. If you require both left and right side lamps, two units will need to be purchased. Does my trailer wiring need to support a reverse light for this lamp to work? Yes the MAXILAMPC3XRWB includes a reverse light function that requires a reverse trigger wire in the trailer wiring harness. Confirm your trailer's wiring supports reverse light activation before purchasing. What is covered under the 7-year warranty? The 7-year warranty is provided by LED Autolamps and covers manufacturing defects. Contact your retailer or LED Autolamps directly for warranty claim procedures and terms. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Three-Function Amber LED Marker Side Marker, Side Direction & Front End Outline. ADR Approved, Twin Pack. Product Overview The LED Autolamps 5025AM2 is a twin blister pack of amber LED combination marker lamps serving three ADR-approved functions in a single compact unit side marker, side direction indicator, and front end outline marker. Measuring just 50mm x 25mm x 21mm with a black bezel, these low-profile lamps are designed for trailers, trucks, caravans, and commercial vehicles where a discreet, fast-installing marker solution is required. The non-fastener fitting system is one of the standout features of the 5025 series installation requires only a 10mm drill hole for the serrated plug, with 3M high-quality tape securing the lamp body to the mounting surface. No screws, no drilling of multiple holes, and no bracket hardware. Each lamp includes a 20cm cable for easy connection. With 2 LEDs per lamp, IP67 weatherproofing, 12–24V multivolt operation, and ADR approval across all three functions, the 5025AM2 is a practical, fast-install solution for amber side and front marker applications. Key Specifications Functions: Side marker, side direction indicator, front end outline marker LED colour: Amber Number of LEDs: 2 per lamp Housing/bezel colour: Black Dimensions: 50mm x 25mm x 21mm Mount type: Non-fastener 10mm serrated plug + 3M tape Cable length: 20cm IP rating: IP67 Input voltage: 12–24V DC (multivolt) Current draw: 0.029A at 13.8V / 0.029A at 28V ADR approvals: Side Marker (49/00, CRN 47214), Side Direction (6/00 Cat5, CRN 47215), Front End (49/00, CRN 47218) Warranty: 5 years Pack quantity: 2 lamps (twin blister pack) Brand: LED Autolamps SKU: 5025AM2 Features & Benefits Three ADR-approved functions: Side marker, side direction, and front end outline in one lamp, each with separate ADR CRN certification for full legal compliance across all applications Non-fastener fitting system: Serrated plug and 3M tape installation eliminates the need for screws or multiple drill holes, saving significant installation time on production trailer builds and retrofits Black bezel: Low-profile black housing blends cleanly with trailer frames, body panels, and structural members for a discreet, professional appearance Compact 50mm x 25mm footprint: Ultra-compact dimensions suit tight mounting locations where larger marker lamps cannot be fitted 2 LEDs per lamp: Delivers effective amber light output in a compact, energy-efficient form factor with minimal current draw (0.029A) 20cm cable: Pre-wired with a 20cm lead for straightforward connection during installation 12V and 24V compatible: Multivolt operation suits passenger, caravan, and trailer applications through to 24V commercial trucks IP67 weatherproof: Completely protected against dust and temporary water immersion for reliable outdoor performance year-round Twin pack: Two lamps per pack covering both sides of a vehicle or trailer in a single purchase 5-year warranty: Backed by LED Autolamps' 5-year product warranty Technical Specs Specification Detail SKU 5025AM2 Brand LED Autolamps Functions Side Marker, Side Direction, Front End Outline LED Colour Amber Number of LEDs 2 per lamp Housing/Bezel Colour Black Dimensions 50mm x 25mm x 21mm Mount Type Non-fastener 10mm serrated plug + 3M tape Cable Length 20cm IP Rating IP67 Input Voltage 12–24V DC (multivolt) Current Draw 0.029A @ 13.8V / 0.029A @ 28V ADR Side Marker 49/00, CRN 47214 ADR Side Direction 6/00 Cat5, CRN 47215 ADR Front End Outline 49/00, CRN 47218 Warranty 5 Years Pack Quantity 2 lamps (twin blister pack) Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR-compliant amber side or front end markers including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Horse floats and livestock trailers Pairs well with: LED Autolamps MAXILAMPC3XR or MAXILAMPC3XRWB combination lamps LED Autolamps 42RM rear marker LED Autolamps 7030R self-adhesive reflectors Frequently Asked Questions How does the non-fastener fitting system work? The 5025AM2 installs using a serrated plug through a 10mm hole in the mounting surface, combined with high-quality 3M double-sided tape on the lamp body. No screws, brackets, or multiple drill holes are required making it one of the fastest marker lamp installations available. Is this lamp ADR approved for all three functions? Yes the 5025AM2 holds separate ADR certification for each function: Side Marker (ADR 49/00, CRN 47214), Side Direction (ADR 6/00 Cat5, CRN 47215), and Front End Outline Marker (ADR 49/00, CRN 47218). How many lamps are included in this pack? The 5025AM2 twin blister pack contains two amber lamps sufficient for both left and right side fitment in a single purchase. What cable length is included with each lamp? Each lamp comes with a 20cm pre-wired cable lead for connection to the vehicle or trailer wiring. What is the current draw of these lamps? Each lamp draws just 0.029A at both 13.8V and 28V minimal electrical load on the vehicle's system. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Light up your drive with the OEX LLX33043 LED Bull Bar Combination Lamp – built tough for Australian conditions This heavy-duty 12V/24V LED combo lamp integrates a bright front indicator, park light, and daytime running light (DRL) into a single compact unit, perfect for 4x4s, trucks, and utility vehicles. OEX LLX33043 Features: Remove the Ear Mount to Convert to Flush Mount OEX LLX33043 Specifications: Colour  Amber/Clear Light Style Front Indicator & Position Light Light Type LED Mount Cnt to Cnt    210mm Size 226 x 57 x 32mm Lens Material Polycarbonate Current Indicator: 0.2A, Front: .01A @ 12V Mount Ear or Flush Connector Pre-Wired Compliance Indicator: ADR 6/00, Park: ADR 49/00, DRL: ADR 76/00 Weight .32kg   Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Popular Truck Style Amber LED Marker Brushed Stainless Steel Bezel, Clear Lens, Dual ADR Approval. Product Overview The LED Autolamps 86AMB is a low-profile amber LED clearance and marker lamp featuring a brushed stainless steel bezel, clear polycarbonate lens with internal amber LEDs, and a slim 10mm depth profile. Part of the well-established 86 series from LED Autolamps, the 86AMB is a popular truck and trailer style marker light that combines understated aesthetics with genuine ADR compliance across two approval categories ADR 74/00 and ADR 45/01. Measuring just 86mm x 31mm x 10mm, this ultra-slim surface mount lamp suits trailer frames, side rails, and body panels where a low-profile, professional marker is required. The brushed stainless steel bezel provides corrosion resistance for coastal and demanding outdoor environments, while the clear lens with internal amber LEDs maintains colour accuracy over time without UV-related lens discolouration. At just 0.05A current draw at 13.8V, the 86AMB places minimal load on the vehicle's electrical system. Backed by a 5-year warranty and supplied individually. Key Specifications Function: Clearance / marker lamp side indicator LED colour: Amber Lens: Clear polycarbonate with internal amber LEDs Bezel: Brushed stainless steel Dimensions: 86mm x 31mm x 10mm Mount type: Surface mount pre-wired IP rating: IP67 Input voltage: 12–24V DC Current draw: 0.05A @ 13.8V Compliance: ADR 74/00, ADR 45/01 Warranty: 5 years Weight: 0.5kg Packaging: Single unit Brand: LED Autolamps SKU: 86AMB Features & Benefits Dual ADR approval: Certified under both ADR 74/00 and ADR 45/01, covering multiple marker lamp application categories for broad legal compliance across trailer and commercial vehicle types Brushed stainless steel bezel: Corrosion-resistant stainless construction withstands coastal salt spray, outback dust, and road grime, providing lasting durability superior to chrome plastic alternatives Clear lens with internal amber LEDs: Modern design maintains colour accuracy and brightness without UV fading or lens discolouration common to traditional amber-tinted plastic lenses Ultra-slim 10mm profile: Low-profile design sits nearly flush with mounting surfaces, reducing snag risk and maintaining clean aerodynamic lines on modern trailers and caravans Popular truck style: The 86 series lamp profile is a widely recognised and trusted form factor across Australian truck and trailer builds 0.05A current draw: Ultra-low electrical load at 12V, placing minimal demand on the vehicle's electrical system across any number of installed units 12V and 24V compatible: Multivolt operation suits both passenger vehicle and caravan trailer applications and 24V commercial truck systems IP67 weatherproof: Completely protected against dust ingress and temporary water immersion for reliable outdoor performance year-round Pre-wired connector: Supplied with pre-wired leads for straightforward installation 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 86AMB Brand LED Autolamps Type Clearance / Marker Lamp Function Side Indicator / Marker LED Colour Amber Lens Clear polycarbonate (internal amber LEDs) Bezel Material Brushed Stainless Steel Dimensions 86mm x 31mm x 10mm Mount Type Surface Mount Connector Pre-wired IP Rating IP67 Input Voltage 12–24V DC Current Draw 0.05A @ 13.8V ADR Compliance ADR 74/00, ADR 45/01 Warranty 5 Years Weight 0.5kg Packaging Single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR-compliant amber marker or clearance lighting including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Horse floats and livestock trailers Pairs well with: LED Autolamps MAXILAMPC3XR or MAXILAMPC3XRWB combination lamps LED Autolamps 42AM amber side direction indicator LED Autolamps 7030R red self-adhesive reflectors Frequently Asked Questions What ADR categories is this lamp approved for? The 86AMB holds dual ADR approval under ADR 74/00 and ADR 45/01, covering clearance/marker and side marker indicator categories for comprehensive legal compliance on Australian road vehicles and trailers. Why does this lamp have a clear lens if it's amber? The 86AMB uses a clear polycarbonate lens with internal amber LEDs to produce the amber light output. This approach maintains colour accuracy and brightness over time without the UV fading and discolouration that occurs with traditional amber-tinted plastic lenses. What is the bezel material and why does it matter? The 86AMB features a brushed stainless steel bezel providing genuine corrosion resistance against salt spray, moisture, and road chemicals. This makes it more durable in coastal and outback Australian conditions than standard chrome plastic bezels. What is the current draw of this lamp? The 86AMB draws 0.05A at 13.8V (12V system), placing minimal load on the vehicle's electrical system ideal for multi-lamp installations across larger trailers and trucks. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions about this product. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Category 5 Amber LED Side Direction Indicator Classic Truck Style, Black Base, Clip-In Lens. Product Overview The LED Autolamps 42AM is an amber LED Category 5 side direction indicator lamp in the classic truck style, featuring a black base bracket, polycarbonate clip-in clear lens, and internal amber LEDs. Measuring 74mm x 38mm x 35mm, the 42AM shares the same proven 42 series form factor as the red 42RM rear marker making it a natural companion for consistent lamp styling across trailer, truck, and caravan builds. ADR approved (CTA042836) for Category 5 side direction indicator use and IP67 rated for complete weatherproof protection, the 42AM operates on both 12V and 24V systems and includes a 16cm cable for straightforward connection. The surface mount black base bracket secures horizontally to the mounting surface, with the amber lens clipping in cleanly for a finished, professional result. Supplied individually in blister packaging and backed by LED Autolamps' 5-year warranty. Key Specifications Function: Category 5 side direction indicator lamp LED colour: Amber Housing/base colour: Black Lens: Clear polycarbonate clip-in Dimensions: 74mm x 38mm x 35mm Mount type: Surface mount horizontal screw bracket with clip-in lamp Cable length: 16cm IP rating: IP67 Input voltage: 12–24V DC Compliance: ADR approved CTA042836 (Category 5) Warranty: 5 years Weight: 0.078kg Packaging: Blister pack single unit Brand: LED Autolamps SKU: 42AM Features & Benefits ADR Category 5 side direction indicator: Fully compliant with Australian Design Rules for Category 5 side direction indicator use on trailers, trucks, and commercial vehicles Classic truck style: The 42 series form factor is one of the most widely recognised lamp profiles on Australian trucks and trailers, providing a consistent, professional appearance Black base: Matte black bracket finish suits modern trailer and commercial vehicle builds where a dark, low-profile lamp aesthetic is preferred; complements the red 42RM rear marker for matched lamp styling Polycarbonate clip-in lens: Replaceable clip-in lens allows lens swap without removing the bracket from the mounting surface Clear lens with internal amber LEDs: Maintains colour accuracy and brightness without UV-related lens discolouration over time 16cm cable: Pre-wired with a 16cm lead for easy connection during installation 12V and 24V compatible: Multivolt operation suits passenger and caravan trailer applications through to 24V commercial trucks IP67 weatherproof: Completely protected against dust ingress and temporary water immersion 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 42AM Brand LED Autolamps Function Category 5 Side Direction Indicator LED Colour Amber Housing/Base Colour Black Lens Clear polycarbonate clip-in Dimensions 74mm x 38mm x 35mm Mount Type Surface mount horizontal screw bracket, clip-in lamp Cable Length 16cm IP Rating IP67 Input Voltage 12–24V DC ADR Compliance CTA042836 Category 5 Warranty 5 Years Weight 0.078kg Packaging Blister Pack single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR Category 5 amber side direction indicators including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Pairs well with: LED Autolamps MAXILAMPC3XR or MAXILAMPC3XRWB combination lamps LED Autolamps 42RM red rear marker LED Autolamps 35CARM red/amber side marker LED Autolamps 7030R self-adhesive reflectors Frequently Asked Questions What ADR category is the 42AM approved for? The 42AM is ADR approved as a Category 5 side direction indicator lamp under certification CTA042836, confirming it meets Australian legal requirements for side direction indicator use on trailers and commercial vehicles. What is the difference between the 42AM and the 42RM? The 42AM is an amber side direction indicator (Category 5) with a black base bracket. The 42RM is a red rear end outline marker with a chrome bracket. Both share the same 42 series form factor (74mm x 38mm x 35mm) for consistent lamp styling across trailer builds. Can the lens be replaced without removing the bracket? Yes the clip-in lens design allows lens replacement without removing the bracket from the mounting surface, simplifying maintenance on installed units. What cable length is included with the 42AM? The 42AM includes a 16cm pre-wired cable lead for connection to the vehicle or trailer wiring. What is covered under the 5-year warranty? The 5-year warranty is provided by LED Autolamps and covers manufacturing defects. Contact your retailer or LED Autolamps directly for warranty claim procedures and terms. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Maxi Combination Lamp for Ute Trays Stop, Tail, Indicator, Reverse & Reflector with DT04-6P Connector and Load Resistors. Product Overview The LED Autolamps SOMAXI2LR/450B is a five-function 12V LED maxi combination lamp designed specifically to suit most popular brands of vehicle trays making it the go-to lighting solution for aftermarket tray-body ute conversions and tray-mounted trailer connections. Delivering stop, tail, indicator, reverse, and reflector functions in a single 370mm x 135mm x 40mm surface-mount unit, the SOMAXI2LR/450B combines ADR and ECE compliant lighting with practical plug-and-play installation. What distinguishes this lamp from standard combination lamps is the inclusion of two pre-wired load resistors and a DT04-6P male connector purpose-built to address the LED flash rate issues common on modern vehicles with CAN bus or LED-specific indicator circuits. Combined with the applicable patch lead (sold separately), installation is straightforward: surface mount the lamp horizontally using the rear bolts through a 10mm hole in the fixing surface, and connect via the DT04-6P plug. Note this lamp is 12V only not suitable for 24V applications. Backed by a 5-year warranty and supplied individually. Key Specifications Functions: Stop, tail, indicator, reverse, reflector Voltage: 12V only (not 24V compatible) Housing colour: Black Dimensions: 370mm x 135mm x 40mm Mount type: Horizontal surface mount rear bolts through 10mm hole Connector: DT04-6P male Includes: 2x load resistors (pre-wired) IP rating: IP67 Current draw: Stop 0.23A / Tail 0.04A / Indicator 0.22A / Reverse 0.16A @ 13.8V Compliance: ADR and ECE approved CTA040963 Warranty: 5 years Weight: 1.25kg Packaging: Polybag single unit Brand: LED Autolamps SKU: SOMAXI2LR/450B Features & Benefits Adapted for popular vehicle tray brands: Engineered to suit most popular brands of aftermarket ute tray bodies, providing a known-fit lighting solution for tray conversions without the need for custom wiring adaptors Five-function combination lamp: Stop, tail, indicator, reverse, and reflector in a single lamp unit, simplifying the wiring and lamp count for tray body rear lighting installations Pre-wired load resistors included: Two load resistors are pre-wired into the harness to prevent hyper-flashing and indicator fault warnings caused by LED low current draw on modern CAN bus and LED-compatible vehicles a critical inclusion for contemporary ute conversions DT04-6P male connector: Industry-standard Deutsch DT connector for secure, weather-sealed plug-and-play connectivity with compatible patch leads IP67 weatherproof: Fully protected against dust ingress and temporary water immersion for reliable outdoor performance in working ute and tray body environments ADR and ECE approved CTA040963: Certified for all five functions across Australian and international compliance standards Compact current draw: Stop 0.23A / Tail 0.04A / Indicator 0.22A / Reverse 0.16A at 13.8V low electrical load across all functions Horizontal surface mount: Mounts directly to tray body surfaces using rear bolts through a 10mm hole per ADR 13/00 mounting instructions 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU SOMAXI2LR/450B Brand LED Autolamps Functions Stop, Tail, Indicator, Reverse, Reflector Light Type LED Voltage 12V only Housing Colour Black Dimensions 370mm x 135mm x 40mm Mount Type Horizontal surface mount rear bolts, 10mm hole Connector DT04-6P male Included 2x pre-wired load resistors IP Rating IP67 Current Stop 0.23A @ 13.8V Current Tail 0.04A @ 13.8V Current Indicator 0.22A @ 13.8V Current Reverse 0.16A @ 13.8V ADR/ECE Compliance CTA040963 Warranty 5 Years Weight 1.25kg Packaging Polybag single unit Compatible With Designed to suit most popular aftermarket vehicle tray brands for ute tray body rear lighting installations. Pairs well with: LED Autolamps compatible patch leads for DT04-6P connector LED Autolamps MAXILAMPC3XR (4-function version without reverse, for non-tray applications) LED Autolamps MAXILAMPC3XRWB (5-function standard version) LED Autolamps 35CARM red/amber side marker LED Autolamps 42AM amber side direction indicator Frequently Asked Questions Why does this lamp include load resistors? The two pre-wired load resistors prevent hyper-flashing and indicator fault warnings on modern vehicles with CAN bus systems or LED-specific indicator detection circuits. When an LED lamp replaces an incandescent globe, the low current draw can trigger the vehicle's flash rate monitoring system the load resistors replicate the electrical load of an incandescent globe to prevent this. What patch lead do I need to complete the installation? A compatible DT04-6P patch lead is required to connect this lamp to your vehicle's wiring and is sold separately. Contact your retailer or LED Autolamps to confirm the correct patch lead for your specific tray brand and vehicle combination. Is this lamp compatible with 24V vehicles? No the SOMAXI2LR/450B is 12V only. Do not install on 24V vehicles or systems. For 12V/24V dual-voltage combination lamps, refer to the MAXILAMPC3XR or MAXILAMPC3XRWB. How is this lamp mounted? The SOMAXI2LR/450B is mounted horizontally on the tray body surface using bolts through the rear of the lamp, with the wire and plug routed through a 10mm hole in the fixing surface. Refer to ADR 13/00 for full mounting position and height requirements. What is covered under the 5-year warranty? The 5-year warranty is provided by LED Autolamps and covers manufacturing defects. Contact your retailer or LED Autolamps directly for warranty claim procedures and terms. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Latest L.E.D High-Performance Technology Gives a Touch of Prestige to Any Modern Caravan, Motor Home, Truck, Trailer or Bus53 With plenty of variety and options, Model 43's stylish and modern design, along with the latest L.E.D high-performance technology gives a touch of prestige to any modern caravan, motor home, truck, trailer or bus.Features: 150mm Diameter Chrome ring 0.5m Hard wired sheathed cable Contoured 150mm White Base Includes mounting screws and an integrated gasket on the surface of the mounting base Current Draw: 0.08A IP Rating: IP66 and IP67 ADR Approved 5-year L.E.D Warranty Virtually unbreakable polycarbonate lens Specifications: Input Voltage Range: 9-33 Volt Current Draw: 0.08A IP Rating: IP66 and IP67 Size: 150mm diameter Candela Rating: 19 ADR: 6/00 2a E4 01 16453 Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!

Read more less

World's Highest Quality Vehicle Lighting Products that Meet and Exceed Customer Expectations! 53 With plenty of variety and options, Model 43's stylish and modern design, along with the latest L.E.D high-performance technology gives a touch of prestige to any modern caravan, motor home, truck, trailer or bus. Features: Suitable For 12-volt Or 24-volt Applications 130mm Diameter 0.5m Hard-wired Sheathed Cable Black Base Includes Mounting Screws And An Integrated Gasket On The Surface Of The Mounting Base Current Draw: 0.08a Ip Rating: Ip66 And Ip67 ADR Approved 49/00 5-year LED Warranty Virtually Unbreakable Polycarbonate Lens Specifications: Warranty: Five Years Voltage: 12 Or 24 Weight: .34kg Light Style: Rear Indicator Light Light Type: LED Current: 0.08a Mount: Surface Connector: Pre-wired Environmental: IP66 Voltage Rating: 9 To 33 Compliance: ADR 6/00 Cat 2A Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!

Read more less

Designed to Work with Marker Lamp Features: 0.5m Hard wired cable White deflector base Virtually unbreakable polycarbonate lens 5-year L.E.D Warranty Rated to 100,000 hours of L.E.D life IP Rating: IP66 and IP68 ADR Approved Current draw: 0.02A Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!

Read more less

Market Leader in The Field of Automotive Lighting and Electrical Equipment, Servicing Original EquipmentFeatures: Easy installation for the DIY enthusiast due to Internal switching (Patent Pending) 284M @ 1 Lux beam length 34M @1 lux beam width 2,720 Raw Lumens, 2,235 Effective Lumens 7-year ‚ÄúNO FAULT‚Äù Warranty Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!

Read more less

ADR Approved Red Stop/Tail Lamp Insert for J3 Jumbo Series Inbuilt Reflex Reflector, IP67, 5-Year Warranty Product Overview The LED Autolamps J3RM is a red stop/tail lamp insert designed as a replacement for the J3 Jumbo Series lamp assemblies, measuring 190mm x 122mm x 30mm. Like the J3AM indicator insert, it is also individually mountable with a bracket as a standalone stop/tail lamp for new-build applications. The inbuilt reflex reflector adds passive rear visibility and compliance in a single unit. ADR road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits J3 Jumbo Series replacement insert — direct red stop/tail lamp replacement for J3 series Jumbo lamp assemblies Individually mountable with bracket — can also be used as a standalone surface-mount stop/tail lamp Inbuilt reflex reflector — integrated passive reflector for additional rear visibility and compliance ADR road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU J3RM Lamp Type Stop / Tail (Replacement Insert) LED Colour Red Voltage Range 12V / 24V Dimensions 190mm x 122mm x 30mm Reflector Inbuilt reflex Mounting Surface mount with bracket Protection Rating IP67 Compliance ADR Suits LED Autolamps J3 Jumbo Series Warranty 5 years Compatible With / Goes Well With LED Autolamps J3 Jumbo Series lamp assemblies (stop/tail replacement) LED Autolamps J3AM indicator insert (same 190x122mm form factor — matched pair) Trailer, truck, and commercial vehicle builds requiring individually mounted Jumbo-format stop/tail lamps 12V and 24V vehicle electrical systems LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What is the J3RM designed to replace? The J3RM is a red stop/tail lamp insert for the LED Autolamps J3 Jumbo Series lamp assemblies — it fits directly into existing J3 housings as a stop/tail replacement. How does the J3RM pair with the J3AM? Both share the same 190mm x 122mm x 30mm form factor — the J3RM is the stop/tail insert and the J3AM is the indicator insert, making them a natural matched pair for a complete J3 series replacement or standalone Jumbo-format installation. Can the J3RM be used as a standalone lamp? Yes. In addition to being a replacement insert, the J3RM is individually mountable with a bracket and can be surface mounted as a standalone stop/tail lamp. What is the IP rating on the J3RM? The J3RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the J3RM carry? The J3RM is backed by a 5-Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today! year warranty from LED Autolamps.

Read more less