ADR Approved Jumbo Stop/Tail/Indicator Assembly with Reflex Reflectors 595mm, Full CRN Certification, IP67 Product Overview The LED Autolamps J3BARRM is a 12/24V Jumbo rear combination lamp assembly covering stop, tail, and indicator functions with inbuilt reflex reflectors across a 595mm x 130mm x 45mm surface-mount housing. At nearly 600mm wide, it is one of the largest rear combination lamps in the LED Autolamps range suited to wide-body trucks, semi-trailers, and heavy commercial vehicles requiring a dominant, high-visibility rear lighting presence. All three functions and the reflector carry individual CRN approvals: stop/tail CRN42965, indicator CRN42964, and reflector CRN42966. Drawing 0.47A stop, 0.04A tail, and 0.42A indicator at 13.8V, with a 500mm centre-to-centre mount. Rated IP67 and backed by a 5-year warranty. Features & Benefits 595mm Jumbo form factor — one of the widest rear combination lamps in the LED Autolamps range; designed for wide-body trucks and heavy semi-trailer applications Stop, tail, indicator, and reflex reflectors — four functions with individual CRN certifications in a single unit Full individual CRN certification — stop/tail CRN42965, indicator CRN42964, reflector CRN42966 Inbuilt reflex reflectors — integrated passive reflective elements for additional rear visibility and compliance 500mm centre-to-centre mount — confirm against your panel before installation Pre-wired surface mount — ready to connect out of the pack ADR road approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V and 24V vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU J3BARRM Series Jumbo Lamp Type Stop / Tail / Indicator / Reflector Voltage Range 12V / 24V Dimensions 595mm x 130mm x 45mm Mount Centre-to-Centre 500mm Stop Current Draw 0.47A @ 13.8V Tail Current Draw 0.04A @ 13.8V Indicator Current Draw 0.42A @ 13.8V Reflector Inbuilt reflex Mounting Surface mount Connector Pre-wired Protection Rating IP67 Stop/Tail Compliance ADR — CRN42965 Indicator Compliance ADR — CRN42964 Reflector Compliance ADR — CRN42966 Warranty 5 years Compatible With / Goes Well With Wide-body trucks, semi-trailers, and heavy commercial vehicles requiring Jumbo-format rear combination lighting 12V and 24V vehicle electrical systems LED Autolamps J3AM indicator insert (same J3 Jumbo series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the J3BARRM approved for road use in Australia? Yes. The J3BARRM holds individual ADR CRN certifications — stop/tail (CRN42965), indicator (CRN42964), and reflector (CRN42966) — meeting Australian Design Rules for full legal on-road use. What vehicles is the 595mm Jumbo format suited to? The 595mm length is designed for wide-body trucks, semi-trailers, B-doubles, and heavy commercial vehicles where a proportionally larger rear lamp is required for high-visibility compliance and aesthetic fit on wide rear panels. What are the current draws across all three functions? Stop draws 0.47A, tail 0.04A, and indicator 0.42A at 13.8V — higher than the smaller 80 and 200 series lamps, consistent with the increased LED count in the Jumbo format. What is the IP rating on the J3BARRM? The J3BARRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed truck body and trailer mounting. What warranty does the J3BARRM carry? The J3BARRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Indicator Lamp Insert for J3 Jumbo Series Inbuilt Reflex Reflector, IP67, 5-Year Warranty Product Overview The LED Autolamps J3AM is an amber indicator lamp insert designed as a replacement for the J3 Jumbo Series lamp range, measuring 190mm x 122mm x 30mm. Like the 280 series replacement lamp units, it can also be individually surface mounted with a bracket as a standalone indicator lamp offering flexibility for both replacement and new-build applications. The inbuilt reflex reflector adds passive rear visibility and compliance without requiring a separate unit. ADR road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits J3 Jumbo Series replacement insert — direct amber indicator lamp replacement for J3 series Jumbo lamp assemblies Individually mountable with bracket — can also be used as a standalone surface-mount indicator lamp Inbuilt reflex reflector — integrated passive reflector for additional rear visibility and compliance ADR road approved — meets Australian Design Rules for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU J3AM Lamp Type Indicator (Replacement Insert) LED Colour Amber Voltage Range 12V / 24V Dimensions 190mm x 122mm x 30mm Reflector Inbuilt reflex Mounting Surface mount with bracket Protection Rating IP67 Compliance ADR Suits LED Autolamps J3 Jumbo Series Warranty 5 years Compatible With / Goes Well With LED Autolamps J3 Jumbo Series lamp assemblies (indicator replacement) Trailer, truck, and commercial vehicle builds requiring individually mounted Jumbo-format indicator lamps 12V and 24V vehicle electrical systems LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What is the J3AM designed to replace? The J3AM is an amber indicator lamp insert designed for the LED Autolamps J3 Jumbo Series lamp assemblies — it fits directly into existing J3 housings as an indicator replacement. Can the J3AM be used as a standalone lamp? Yes. In addition to being a replacement insert, the J3AM is individually mountable with a bracket and can be surface mounted as a standalone indicator lamp in new builds. Is the J3AM approved for road use in Australia? Yes. The J3AM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. What is the IP rating on the J3AM? The J3AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the J3AM carry? The J3AM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Stop/Tail/Indicator with Integrated Licence Plate Lamp Harness Compatible, IP67 Product Overview The LED Autolamps 99ARL2 is a 12V rear combination lamp covering stop, tail, and indicator functions with an integrated licence plate lamp in a square 107mm x 107mm x 23mm housing. Compatible with the LED Autolamps small harness system for plug-and-play wiring, it suits trailers and caravans requiring a compact square lamp with built-in number plate illumination. ECE road approved and rated IP67. Features & Benefits Integrated licence plate lamp — built-in number plate illumination eliminates a separate fitting Small harness compatible — connects directly into LED Autolamps' small harness wiring system for clean, tool-free installation 107mm x 107mm square form factor — compact square housing suits a wide range of trailer and caravan rear panel positions ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems Technical Specs Specification Detail SKU 99ARL2 Lamp Type Stop / Tail / Indicator / Licence Plate Voltage 12V Dimensions 107mm x 107mm x 23mm Harness Small harness compatible Mounting Surface mount Protection Rating IP67 Compliance ECE Compatible With / Goes Well With Trailers and caravans requiring a compact square rear combination lamp with integrated licence plate 12V trailer electrical systems LED Autolamps small harness wiring systems (confirm compatible harness with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 99ARL2 approved for road use in Australia? Yes. The 99ARL2 is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. What is small harness compatibility? The 99ARL2 is compatible with LED Autolamps' small harness wiring system, allowing it to connect directly into a compatible trailer wiring harness without cutting or splicing — a cleaner, faster installation option. Does the 99ARL2 include a licence plate lamp? Yes. The integrated licence plate lamp illuminates the number plate without requiring a separate fitting. What is the IP rating on the 99ARL2? The 99ARL2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 99ARL2 carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Stop/Tail/Indicator/Reflector Lamp Twin Pack 40cm Cable, IP67, 5-Year Warranty Product Overview The LED Autolamps 98BAR2 is a 12V stop, tail, and indicator lamp with built-in reflector, supplied as a twin blister pack with 40cm cable and plug for a complete left and right rear installation. Measuring 100mm x 100mm x 22mm in a low-profile square form factor, it delivers ECE-approved rear combination lighting with integrated passive reflector compliance in a single compact unit. IP67 rated and backed by a 5-year warranty. Features & Benefits Twin blister pack with 40cm cable and plug — both lamps supplied with pre-wired leads for a complete, ready-to-install left and right rear installation Inbuilt reflector — integrated passive reflective element for additional rear visibility and compliance without a separate reflector unit Low-profile 22mm depth — slim square form factor suits surface mounting on trailer and caravan rear panels ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 98BAR2 Pack Contents 2 lamps + 40cm cable and plug Lamp Type Stop / Tail / Indicator / Reflector Voltage 12V Dimensions 100mm x 100mm x 22mm Cable Length 400mm Reflector Inbuilt Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Trailers and caravans requiring a 12V square rear combination lamp with integrated reflector Trailer builds requiring ECE-approved stop/tail/indicator lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 98BAR2 approved for road use in Australia? Yes. The 98BAR2 is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. What is included in the 98BAR2 twin blister pack? The pack contains two lamps, each with a 40cm cable and plug — providing a complete left and right rear installation ready to connect straight out of the pack. What is the inbuilt reflector? The reflector is a passive element integrated into the lamp housing, adding a compliant reflective surface for additional rear visibility without requiring a separate reflector unit. What is the IP rating on the 98BAR2? The 98BAR2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. Is the 98BAR2 compatible with 24V systems? No. The 98BAR2 is a 12V-only lamp and is not rated for 24V applications. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Twin-Function Front Position Lamp with Supplementary Front Indicator Black Bezel, 3-Wire, Multivolt Product Overview The LED Autolamps 97WIM is a dual-function lamp combining a front position lamp with a supplementary front direction indicator in a single 99mm x 47mm x 28.5mm unit. The 3-wire connection allows each function to operate independently the position lamp runs as a constant white front marker while the indicator operates on the separate turn signal circuit. The white-output front position counterpart to the 97AIM amber side marker, sharing the same black bezel form factor. ADR approved, multivolt. Features & Benefits Twin function — combines front position lamp and supplementary front indicator in a single unit, reducing fitting count on truck cab fronts and commercial vehicle panels 3-wire connection — position and indicator functions operate on separate circuits for independent operation Black bezel — clean, professional finish matches the 97AIM for a consistent appearance across all marker positions ADR approved — meets Australian Design Rules for legal on-road use across both functions Multivolt — compatible with 12V and 24V vehicle electrical systems Technical Specs Specification Detail SKU 97WIM Lamp Type Front Position / Front Indicator (Twin Function) Bezel Colour Black Wiring 3-wire Voltage Range 12V / 24V Dimensions 99mm x 47mm x 28.5mm Mounting Surface mount Compliance ADR Compatible With / Goes Well With Trucks and commercial vehicles requiring combined front position and front indicator functions in a single fitting 12V and 24V vehicle electrical systems LED Autolamps 97AIM twin-function side indicator with amber marker (same 99x47mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 97WIM approved for road use in Australia? Yes. The 97WIM is ADR approved, meeting Australian Design Rules requirements for legal on-road use across both front position and front indicator functions. How does the 97WIM differ from the 97AIM? The 97AIM combines a side direction indicator with a constant amber side marker for side lateral visibility. The 97WIM combines a front position lamp with a supplementary front indicator for front-facing applications. Both share the same 99mm x 47mm x 28.5mm black bezel form factor and 3-wire connection. What is the purpose of the 3-wire connection? Three wires provide separate circuits for the position lamp and indicator — one for the front position light (running lights circuit), one for the front indicator (turn signal circuit), and one for ground — allowing each function to operate independently. What voltage range is the 97WIM compatible with? It is multivolt rated, compatible with both 12V and 24V vehicle electrical systems. What warranty does the 97WIM carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Twin-Function Rear Position Lamp with Supplementary Rear Indicator Black Bezel, 3-Wire, Multivolt Product Overview The LED Autolamps 97RIM is a dual-function lamp combining a rear position lamp with a supplementary rear direction indicator in a single 99mm x 47mm x 28.5mm unit. The 3-wire connection allows each function to operate independently the rear position lamp stays on as a constant red running light while the indicator operates on a separate amber turn signal circuit. The rear-facing companion to the 97WIM and 97AIM, sharing the same black bezel 99 series form factor. ADR approved, multivolt. Features & Benefits Twin function — combines rear position lamp and supplementary rear indicator in a single unit, reducing fitting count on trailer and truck body rear panels 3-wire connection — rear position and indicator functions operate on separate circuits for independent operation Black bezel — matches the 97AIM and 97WIM for a consistent appearance across all positions ADR approved — meets Australian Design Rules for legal on-road use across both functions Multivolt — compatible with 12V and 24V vehicle electrical systems Technical Specs Specification Detail SKU 97RIM Lamp Type Rear Position / Rear Indicator (Twin Function) Bezel Colour Black Wiring 3-wire Voltage Range 12V / 24V Dimensions 99mm x 47mm x 28.5mm Mounting Surface mount Compliance ADR Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring combined rear position and rear indicator functions in a single fitting 12V and 24V vehicle electrical systems LED Autolamps 97AIM twin-function side indicator with amber marker (same form factor) LED Autolamps 97WIM twin-function front position with front indicator (same form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 97RIM approved for road use in Australia? Yes. The 97RIM is ADR approved, meeting Australian Design Rules requirements for legal on-road use across both rear position and rear indicator functions. How does the 97RIM complete the 97 series? The 97RIM is the rear-facing unit in the 97 series, joining the 97WIM (front position/indicator) and 97AIM (side indicator/marker). All three share the same 99mm x 47mm x 28.5mm black bezel form factor and 3-wire connection for a consistent, fully matched marker and indicator lamp system across the full vehicle. What is the purpose of the 3-wire connection? Three wires provide separate circuits for the rear position lamp and rear indicator — one for the running lights circuit, one for the turn signal circuit, and one for ground — allowing each function to operate independently. What voltage range is the 97RIM compatible with? It is multivolt rated, compatible with both 12V and 24V vehicle electrical systems. What warranty does the 97RIM carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V White Front Marker Brushed Steel Bezel, Clear Lens, Popular Truck Style Product Overview The LED Autolamps 86WM is a 12/24V white front marker lamp in a popular truck-style form factor, featuring a brushed steel bezel and clear lens at 86mm x 31mm. The brushed steel bezel gives it a premium appearance suited to truck cab fronts and commercial vehicle body work, while the clear lens produces a clean, unobtrusive look when inactive. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Brushed steel bezel — premium finish suited to truck cab fronts and commercial vehicle styling Clear lens — clean, modern appearance when inactive; white LED output activates when energised Popular truck-style design — widely used across Australian and international commercial vehicle installations Low-profile form factor — slim 86mm x 31mm profile suits front panel and cab marker positions ADR road approved — meets Australian Design Rules for legal on-road use as a front marker lamp IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 86WM Lamp Type Front Marker LED Colour White Lens Colour Clear Bezel Material Brushed steel Voltage Range 12V / 24V Length 86mm Width 31mm Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trucks and commercial vehicles requiring front marker lamps with a premium brushed steel finish 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 86WM approved for road use in Australia? Yes. The LED Autolamps 86WM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a front marker lamp. What does the brushed steel bezel look like? The brushed steel bezel gives the lamp a premium metallic finish — a popular choice on truck cab fronts and commercial vehicle bodywork where a more refined appearance is preferred over standard plastic bezels. What is the popular truck-style design? The 86mm x 31mm rectangular form factor is a widely adopted size across Australian and international truck and commercial vehicle applications — widely recognised as a standard truck-style front marker lamp profile. What is the IP rating on the 86WM? The 86WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 86WM carry? The 86WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Stop/Tail/Indicator/Reverse Lamp Black Bracket, 281x101mm, IP67 Product Overview The LED Autolamps 82BARW is the black bracket variant of the 82 series rear combination lamp, covering stop, tail, indicator, and reverse functions in the same 281mm x 101mm x 30mm low-profile form factor as the 82CARW. Where the 82CARW uses a clear lens, the 82BARW uses conventional coloured lenses in a black bracket housing suited to standard trailer and truck body rear panel installations. ECE Australian road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Black bracket — professional finish suits a wide range of trailer and vehicle body aesthetics Stop, tail, indicator, and reverse in one assembly — four functions in a single low-profile surface-mount unit Low-profile 30mm depth — slim bracket sits close to the panel surface ECE Australian road approved — meets international and Australian road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 82BARW Lamp Type Stop / Tail / Indicator / Reverse Voltage 12V Dimensions 281mm x 101mm x 30mm Housing Colour Black Mounting Surface mount (bracket) Protection Rating IP67 Compliance ECE (Australian road approved) Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a 12V four-function rear combination lamp LED Autolamps 82CARW (same 281mm x 101mm form factor, clear lens variant) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 82BARW approved for road use in Australia? Yes. The 82BARW is ECE Australian road approved, meeting international and Australian road approval standards for legal on-road use across all four functions. How does the 82BARW differ from the 82CARW? The 82BARW uses a black bracket with conventional coloured lenses, while the 82CARW uses a clear lens. Both share the same 281mm x 101mm x 30mm form factor and ECE approval — choose based on the preferred lens and bracket aesthetic. What functions does the 82BARW cover? It combines stop, tail, indicator, and reverse in a single surface-mount bracket assembly. What is the IP rating on the 82BARW? The 82BARW is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 82BARW carry? The 82BARW is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 25 White LED Reverse Lamp Clip-In Lens, 100x100mm, 0.31A, 40cm Wire Product Overview The LED Autolamps 80WM is a 12/24V reverse lamp with 25 white LEDs and a clip-in replaceable lens, measuring 100mm x 100mm x 28mm in a black housing with a 60mm centre-to-centre mount. Supplied with a 40cm pre-wired cable, it is approved under CRN35797 the same reverse compliance reference as the 80BARWM making it a natural standalone reverse lamp companion to the 80 series combination lamps. Drawing 0.31A at 13.8V, IP67 rated, and backed by a 5-year warranty. Features & Benefits 25 white LEDs — bright, consistent reverse output across the 100mm square lamp face Clip-in replaceable lens — lens swaps independently without removing the full housing from the panel ADR approved — certified under CRN35797 for legal on-road use as a reverse lamp 40cm pre-wired cable — generous lead for flexible installation routing 60mm centre-to-centre mount — confirm against your panel before installation IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 80WM Lamp Type Reverse LED Quantity 25 LED Colour White Housing Colour Black Voltage Range 12V / 24V Dimensions 100mm x 100mm x 28mm Mount Centre-to-Centre 60mm Current Draw 0.31A @ 13.8V Cable Length 400mm Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR — CRN35797 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a standalone reverse lamp 12V light vehicles and 24V heavy transport applications LED Autolamps 80BARRM stop/tail/indicator lamp (same 80 series — add 80WM for reverse) LED Autolamps 80BARWM (same CRN35797 reverse certification — four-function version) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 80WM approved for road use in Australia? Yes. The 80WM is ADR approved under CRN35797, meeting Australian Design Rules requirements for legal on-road use as a reverse lamp. How does the 80WM pair with the 80BARRM? The 80BARRM covers stop, tail, and indicator. Adding the 80WM provides the reverse function separately — sharing the same CRN35797 reverse approval as the 80BARWM — for a complete 80 series rear lighting system. What does the clip-in lens mean for maintenance? The lens clips out independently, allowing replacement without removing the full lamp from the mounting surface — consistent with the individual lens replacement design across the 80 series. What is the current draw of the 80WM? The 80WM draws 0.31A at 13.8V — the same reverse current as the 80BARWM, confirming consistent LED specification across the 80 series. What warranty does the 80WM carry? The 80WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Stop/Tail/Indicator/Reverse Assembly 108 LEDs, Full CRN Certification, 278x100mm, IP67 Product Overview The LED Autolamps 80BARWM is the four-function flagship of the 80 series a 12/24V rear combination lamp covering stop, tail, indicator, and reverse with 108 LEDs across a 278mm x 100mm x 28mm black bracket. All four functions carry individual CRN certification: stop/tail CRN33059, indicator CRN33098, and reverse CRN35797. Individual lens replacements, 240mm centre-to-centre mount, and pre-wired connection. Drawing 0.33A stop, 0.06A tail, 0.31A indicator, and 0.17A reverse at 13.8V. Rated IP67 and backed by a 5-year warranty. Features & Benefits 108 LEDs across four functions — comprehensive rear lighting coverage in a single 278mm unit Full individual CRN certification — stop/tail CRN33059, indicator CRN33098, reverse CRN35797 Individual lens replacements — each lens section replaces independently, reducing fleet maintenance costs All four current draws confirmed — 0.33A stop, 0.06A tail, 0.31A indicator, 0.17A reverse at 13.8V ADR approved across all four functions — complete compliance documentation for road-legal fitment 240mm centre-to-centre mount — confirm against your panel before installation Pre-wired surface mount — ready to connect out of the blister pack IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 80BARWM Lamp Type Stop / Tail / Indicator / Reverse LED Quantity 108 Voltage Range 12V / 24V Dimensions 278mm x 100mm x 28mm Mount Centre-to-Centre 240mm Stop Current Draw 0.33A @ 13.8V Tail Current Draw 0.06A @ 13.8V Indicator Current Draw 0.31A @ 13.8V Reverse Current Draw 0.17A @ 13.8V Lens Individual replacements Housing Colour Black Mounting Surface mount Connector Pre-wired Protection Rating IP67 Stop/Tail Compliance ADR — CRN33059 Indicator Compliance ADR — CRN33098 Reverse Compliance ADR — CRN35797 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring a complete four-function rear combination lamp with full ADR certification 12V light vehicles and 24V heavy transport applications LED Autolamps 80BARRM (same dimensions, stop/tail/indicator only — no reverse) LED Autolamps 80BARM (same certifications, narrower 188mm format) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 80BARWM approved for road use in Australia? Yes. The 80BARWM holds individual ADR CRN certifications across all four functions — stop/tail (CRN33059), indicator (CRN33098), and reverse (CRN35797) — meeting Australian Design Rules for full legal on-road use. How does the 80BARWM differ from the 80BARRM? The 80BARWM adds reverse function (CRN35797) to the same 278mm x 100mm form factor as the 80BARRM. Choose the 80BARWM for a complete four-function assembly; choose the 80BARRM where a separate reverse lamp is preferred. What are all four current draws? Stop draws 0.33A, tail 0.06A, indicator 0.31A, and reverse 0.17A — all at 13.8V. What is the IP rating on the 80BARWM? The 80BARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 80BARWM carry? The 80BARWM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Stop/Tail/Indicator Assembly 180 LEDs, Individual Lens Replacements, 278x100mm, IP67 Product Overview The LED Autolamps 80BARRM is the wide-format flagship of the 80 series a 12/24V rear combination lamp with 180 LEDs across a 278mm x 100mm x 28mm black bracket, nearly 1.5 times the width of the 80BARM. The same individual lens replacement design keeps maintenance cost low across the higher LED count, and carries identical CRN33059 and CRN33098 ADR certifications. Drawing 0.33A stop, 0.06A tail, and 0.31A indicator at 13.8V, with a 240mm centre-to-centre mount. Rated IP67 and backed by a 5-year warranty. Features & Benefits 180 LEDs — high-density LED array across a 278mm wide lamp for a visually striking, high-output rear lighting presence Individual lens replacements — each lens section replaces independently without removing the full unit — ideal for fleet maintenance ADR approved — stop/tail CRN33059 and indicator CRN33098 — same certifications as the 80BARM Black bracket — professional finish for trailer and truck rear panels 240mm centre-to-centre mount — confirm against your panel before installation Pre-wired surface mount — ready to connect out of the blister pack IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 80BARRM Lamp Type Stop / Tail / Indicator LED Quantity 180 Voltage Range 12V / 24V Dimensions 278mm x 100mm x 28mm Mount Centre-to-Centre 240mm Stop Current Draw 0.33A @ 13.8V Tail Current Draw 0.06A @ 13.8V Indicator Current Draw 0.31A @ 13.8V Lens Individual replacements Housing Colour Black Mounting Surface mount Connector Pre-wired Protection Rating IP67 Stop/Tail Compliance ADR — CRN33059 Indicator Compliance ADR — CRN33098 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring a wide-format, high-output rear combination lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail/indicator lighting with full CRN certification LED Autolamps 80BARM (same CRN approvals, narrower 188mm format) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 80BARRM approved for road use in Australia? Yes. The 80BARRM holds ADR CRN certifications for stop/tail (CRN33059) and indicator (CRN33098), meeting Australian Design Rules requirements for legal on-road use. How does the 80BARRM differ from the 80BARM? The 80BARRM is 278mm wide with 180 LEDs and a 240mm mount spacing, while the 80BARM is 188mm wide with 72 LEDs and a 150mm mount spacing. Both carry the same CRN certifications and current draw figures — choose based on the panel width and visual impact required. What does individual lens replacement mean for maintenance? Each lens section can be replaced independently — reducing repair costs on commercial fleets where replacing the full lamp for a single damaged lens is not cost-effective. What is the IP rating on the 80BARRM? The 80BARRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 80BARRM carry? The 80BARRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Stop/Tail/Indicator 3-Lamp Assembly 108 LEDs, Individual Lens Replacements, IP67 Product Overview The LED Autolamps 80BARR is a 12V three-lamp stop, tail, and indicator assembly with 108 LEDs in a black bracket, with individual lens replacements per lamp section. Carrying ADR 49/00 for stop/tail and ADR 6/00 Cat 2A for the indicator, it is the 12V-only variant in the 80 series suited to light vehicle and trailer applications running 12V systems. Drawing 0.33A stop, 0.06A tail, and 0.29A indicator at 13.8V. Rated IP67 and backed by a 5-year warranty. Features & Benefits 3-lamp assembly with 108 LEDs — three individual lamp sections in a single bracket assembly for a high-density rear lighting installation Individual lens replacements — each lens section replaces independently, reducing repair costs ADR approved — stop/tail ADR 49/00 and indicator ADR 6/00 Cat 2A Black bracket assembly — professional finish for trailer and truck rear panels IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 80BARR Lamp Type Stop / Tail / Indicator Lamp Count 3 LED Quantity 108 Voltage 12V Stop Current Draw 0.33A @ 13.8V Tail Current Draw 0.06A @ 13.8V Indicator Current Draw 0.29A @ 13.8V Lens Individual replacements Housing Colour Black Mounting Surface mount Connector Pre-wired Protection Rating IP67 Stop/Tail Compliance ADR 49/00 Indicator Compliance ADR 6/00 Cat 2A Warranty 5 years Compatible With / Goes Well With Trailers and light vehicles running 12V systems requiring a multi-lamp rear combination assembly LED Autolamps 80BARM (12/24V dual voltage — same 188mm single-bracket format) LED Autolamps 80BARRM (12/24V, 180 LEDs, wider 278mm format) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 80BARR approved for road use in Australia? Yes. The 80BARR is ADR approved under 49/00 for stop/tail and ADR 6/00 Cat 2A for the indicator, meeting Australian Design Rules requirements for legal on-road use. How does the 80BARR differ from the 80BARM? The 80BARR is a 12V-only 3-lamp assembly with 108 LEDs, while the 80BARM is a single-lamp 12/24V unit with 72 LEDs. The 80BARR suits 12V applications requiring a larger multi-lamp assembly; the 80BARM suits 12V or 24V single-lamp installations. What does the 3-lamp assembly mean? The 80BARR combines three individual lamp units in a single black bracket, each with its own replaceable lens — providing a larger combined rear lighting surface than a single lamp. What is the IP rating on the 80BARR? The 80BARR is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 80BARR carry? The 80BARR is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less