ECE Approved Medium Jumbo Stop/Tail/Indicator/Reverse Lamp with Reflex Reflectors 460x130mm, IP67 Product Overview The LED Autolamps 460ARWM is a 12/24V Medium Jumbo rear combination lamp covering stop, tail, indicator, and reverse functions with inbuilt reflex reflectors in a 460mm x 130mm x 33mm ABS base housing with acrylic lens. The 280mm centre-to-centre mount suits larger trailer and truck body rear panel configurations where the standard 275-283mm series lamps are too short. ECE road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Medium Jumbo 460mm form factor — wider than the standard 280-283mm range; suited to larger trailer bodies and truck rear panels Stop, tail, indicator, reverse, and inbuilt reflectors — five functions in a single surface-mount unit Inbuilt reflex reflectors — integrated passive reflective elements for additional rear visibility and compliance Acrylic lens — good optical clarity and UV resistance for outdoor transport applications ABS base — lightweight, impact-resistant thermoplastic housing 280mm centre-to-centre mount — confirm against your panel before installation ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460ARWM Series Medium Jumbo Lamp Type Stop / Tail / Indicator / Reverse / Reflector Voltage Range 12V / 24V Dimensions 460mm x 130mm x 33mm Mount Centre-to-Centre 280mm Lens Material Acrylic Base Material ABS Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Larger trailers, trucks, and commercial vehicles requiring a wide-format rear combination lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE-approved rear combination lighting LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 460ARWM approved for road use in Australia? Yes. The 460ARWM is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia across all five functions. What is the Medium Jumbo classification? Medium Jumbo refers to the 460mm length — a wider format than the standard 280-283mm Mini Jumbo series, suited to larger trailer bodies and truck rear panels where a longer lamp is required for proportional rear lighting coverage. What is the difference between acrylic and polycarbonate lens materials? Acrylic (PMMA) offers good optical clarity and UV resistance. Polycarbonate is generally more impact-resistant but can yellow with UV exposure over time without UV coating. Both are common in trailer lamp lenses — acrylic suits applications where optical clarity is prioritised. What is the IP rating on the 460ARWM? The 460ARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 460ARWM carry? The 460ARWM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Medium Jumbo Stop/Tail/Indicator Lamp with Inbuilt Reflectors 460x130mm, IP67 Product Overview The LED Autolamps 460ARRM is a 12/24V Medium Jumbo rear combination lamp covering stop, tail, and indicator functions with inbuilt reflex reflectors in the same 460mm x 130mm x 33mm form factor as the 460ARWM. The three-function variant without reverse suited to trailer and truck applications where a separate reverse lamp is preferred or already fitted. ECE road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Medium Jumbo 460mm form factor — wider than the standard 280-283mm range; suited to larger trailer bodies and truck rear panels Stop, tail, indicator, and inbuilt reflectors — four functions in a single surface-mount unit Inbuilt reflex reflectors — integrated passive reflective elements for additional rear visibility and compliance ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460ARRM Series Medium Jumbo Lamp Type Stop / Tail / Indicator / Reflector Voltage Range 12V / 24V Dimensions 460mm x 130mm x 33mm Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Larger trailers, trucks, and commercial vehicles requiring a wide-format stop/tail/indicator lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE-approved rear combination lighting LED Autolamps 460ARWM (same form factor with reverse function) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 460ARRM approved for road use in Australia? Yes. The 460ARRM is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. How does the 460ARRM differ from the 460ARWM? The 460ARWM adds reverse function to the same 460mm x 130mm x 33mm Medium Jumbo form factor. The 460ARRM covers stop, tail, indicator, and reflectors only — suited to installations where a separate reverse lamp is already fitted or preferred. What is the Medium Jumbo classification? Medium Jumbo refers to the 460mm length — a wider format than the standard 280-283mm Mini Jumbo series, suited to larger trailer bodies and truck rear panels requiring proportionally sized rear lighting. What is the IP rating on the 460ARRM? The 460ARRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 460ARRM carry? The 460ARRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 3852 Series Stop/Tail/Indicator/Rear Combination Lamp: Rear Combination Lamp With Diffused Tail Function! LED Autolamps 3852ARWM-2 Features: Diffused Tail Function Sequential Indicator 100% Waterproof ECE Approved LED Autolamps 3852ARWM-2 Specifications: Housing Colour: Black IP Rating: IP67 Voltage Range: 12-24V Dimensions: 387mm x 105mm x 30.5mm Weight 1.65kg Legendary Products & Support From Authorized Dealers When you choose LED AUTOLAMPS, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized LED AUTOLAMPS dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by LED AUTOLAMPS's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized LED AUTOLAMPS dealer today!

Read more less

ADR Approved 12V Stop/Tail/Indicator Strip Lamp in Double Black Bracket 428x97mm, IP67 Product Overview The LED Autolamps 380BAR12 is a 12V stop, tail, and indicator strip lamp from the 380 series, supplied pre-mounted in a double black surface mount bracket. Measuring 428mm x 97mm x 22mm, the double bracket configuration houses both lamp strips side by side for a clean, factory-style installation on trailer, caravan, and commercial vehicle rear panels. ADR road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Double black bracket — both lamp strips supplied pre-mounted in a single double bracket unit for a clean, symmetrical rear panel appearance Stop, tail, and indicator in one assembly — three functions across the 380 series strips Surface mounting bracket — straightforward installation on trailer and caravan rear panels ADR road approved — meets Australian Design Rules for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 380BAR12 Lamp Type Stop / Tail / Indicator Voltage 12V Dimensions 428mm x 97mm x 22mm Bracket Double black surface mount Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring a wide-format strip combination lamp assembly 12V trailer and vehicle electrical systems LED Autolamps 380BBSTI12 slimline strip lamp (same 380 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 380BAR12 approved for road use in Australia? Yes. The LED Autolamps 380BAR12 is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across stop, tail, and indicator functions. What does the double black bracket include? The double bracket houses both 380 series lamp strips side by side in a single pre-assembled unit, ready for surface mounting on trailer and caravan rear panels. What functions does the 380BAR12 cover? It covers stop, tail, and indicator functions across the 380 series strip lamp assembly. What is the IP rating on the 380BAR12? The 380BAR12 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 380BAR12 carry? The 380BAR12 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/ADR Approved Front White Marker Clear Lens, Black Bezel, No-Tool Fit, Harness Compatible Product Overview The LED Autolamps 37WM is a 12/24V front white marker lamp with a clear lens and black bezel, completing the 37 series alongside the 37AM, 37RM, and 37ARM. Measuring 70mm x 35mm x 20mm, it installs without tools via a serrated plug and 3M tape, and is compatible with LED Autolamps' harness systems for plug-and-play wiring integration. ECE and ADR approved, IP67 rated. Features & Benefits White LED output with clear lens — bright, clear front marker output; clean appearance when inactive Black bezel — matches the full 37 series for a consistent appearance across all marker positions No tools required — serrated plug and 3M tape allow quick, tool-free installation Harness system compatible — plugs directly into LED Autolamps' compatible harness systems Front marker function — designed for front position marking on trailers, trucks, and commercial vehicles ECE and ADR approved — dual compliance for international and Australian road approval standards IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 37WM Lamp Type Front Marker LED Colour White Lens Colour Clear Bezel Colour Black Voltage Range 12V / 24V Dimensions 70mm x 35mm x 20mm Mounting Serrated plug / 3M tape (no tools) Harness Compatible Yes Protection Rating IP67 Compliance ECE / ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring front position white marker lamps LED Autolamps harness wiring systems (confirm compatible harness with F.A.E.) LED Autolamps 37AM amber side marker (same form factor) LED Autolamps 37RM rear position red marker (same form factor) LED Autolamps 37ARM red/amber side marker (same form factor) 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 37WM approved for road use in Australia? Yes. The 37WM carries both ECE and ADR approval, meeting international and Australian road approval standards for legal on-road use as a front marker lamp. How does the 37WM complete the 37 series? The 37WM is the front white marker, joining the 37AM (amber side), 37RM (red rear), and 37ARM (red/amber side) — all sharing the same 70mm x 35mm x 20mm form factor, black bezel, no-tool installation, and harness compatibility for a fully matched marker lamp system. What does "no tools required" mean for installation? The 37WM uses a serrated plug for electrical connection and 3M tape for mounting — both requiring no drilling, cutting, or tools. What is the IP rating on the 37WM? The 37WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor and transport applications. What warranty does the 37WM carry? Warranty information was not confirmed in available supplier data Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/ADR Approved Rear Position Red Marker Red Lens, Black Bezel, No-Tool Fit, Harness Compatible Product Overview The LED Autolamps 37RM is a 12/24V rear position red marker lamp with a red lens and black bezel, in the same 70mm x 35mm x 20mm form factor as the 37AM. It installs without tools via a serrated plug and 3M tape, and is compatible with LED Autolamps' harness systems for plug-and-play wiring integration. The stop/tail companion to the 37AM amber side marker for a matched installation. ECE and ADR approved, IP67 rated. Features & Benefits Red lens with red LED output — consistently red appearance both active and inactive; suited to rear position marker applications Black bezel — matches the 37AM for a uniform appearance across side and rear marker positions No tools required — serrated plug and 3M tape allow quick, tool-free installation Harness system compatible — plugs directly into LED Autolamps' compatible harness systems ECE and ADR approved — dual compliance for international and Australian road approval standards IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 37RM Lamp Type Rear Position Marker LED Colour Red Lens Colour Red Bezel Colour Black Voltage Range 12V / 24V Dimensions 70mm x 35mm x 20mm Mounting Serrated plug / 3M tape (no tools) Harness Compatible Yes Protection Rating IP67 Compliance ECE / ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring quick-fit rear position red marker lamps LED Autolamps harness wiring systems LED Autolamps 37AM amber side marker (same 70x35mm form factor — matched installation pair) 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 37RM approved for road use in Australia? Yes. The 37RM carries both ECE and ADR approval, meeting international and Australian road approval standards for legal on-road use as a rear position marker lamp. How does the 37RM differ from the 37AM? The 37RM has a red lens and is a rear position marker, while the 37AM has a clear lens and is an amber side marker/indicator. Both share the same 70mm x 35mm x 20mm form factor, black bezel, no-tool installation, and harness compatibility. What does "no tools required" mean for installation? The 37RM uses a serrated plug for electrical connection and 3M tape for mounting — both are push-and-press installations requiring no drilling, cutting, or tools. What is the IP rating on the 37RM? The 37RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 37RM carry? Warranty information was not confirmed in available supplier data  Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/ADR Approved Red/Amber Dual-Colour Side Marker No-Tool Fit, Harness Compatible, IP67 Product Overview The LED Autolamps 37ARM is a 12/24V red/amber dual-colour side marker lamp with a black bezel, in the same 70mm x 35mm x 20mm form factor as the 37AM and 37RM. The dual red/amber lens and LED configuration delivers both red and amber outputs from different viewing angles in a single lamp meeting side marker compliance requirements where both colours are needed. ECE and ADR approved, installs without tools via serrated plug and 3M tape, and is compatible with LED Autolamps' harness systems. Features & Benefits Red/amber dual-colour lens — delivers both red and amber output from different viewing angles, meeting side marker visibility requirements for both colours in a single unit Black bezel — matches the 37AM and 37RM for a consistent appearance across all marker positions No tools required — serrated plug and 3M tape allow quick, tool-free installation Harness system compatible — plugs directly into LED Autolamps' compatible harness systems ECE and ADR approved — dual compliance for international and Australian road approval standards IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 37ARM Lamp Type Side Marker LED Colour Red / Amber Lens Colour Red / Amber Bezel Colour Black Voltage Range 12V / 24V Dimensions 70mm x 35mm x 20mm Mounting Serrated plug / 3M tape (no tools) Harness Compatible Yes Protection Rating IP67 Compliance ECE / ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring dual-colour side marker lamps LED Autolamps harness wiring systems (confirm compatible harness with F.A.E.) LED Autolamps 37AM amber side marker (same form factor) LED Autolamps 37RM rear position red marker (same form factor) 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 37ARM approved for road use in Australia? Yes. The 37ARM carries both ECE and ADR approval, meeting international and Australian road approval standards for legal on-road use as a side marker lamp. Why does a side marker lamp need both red and amber output? Side marker lamps are designed to show red from the rear and amber from the front when viewed from the side — meeting visibility compliance requirements from both directions in a single lamp unit. How does the 37ARM fit with the 37AM and 37RM? All three share the same 70mm x 35mm x 20mm form factor and black bezel. The 37AM is amber-only, the 37RM is red-only, and the 37ARM combines both colours for applications requiring dual-colour side marking — all install the same way and are harness compatible. What is the IP rating on the 37ARM? The 37ARM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 37ARM carry? Warranty information was not confirmed in available supplier data Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/ADR Approved Amber Side Marker Clear Lens, Black Bezel, No-Tool Fit, Harness Compatible Product Overview The LED Autolamps 37AM is a 12/24V amber side marker lamp with a clear lens and black bezel, designed for quick, tool-free installation via a serrated plug and 3M tape. Measuring 70mm x 35mm x 20mm, it is compatible with LED Autolamps' harness systems for plug-and-play integration into existing trailer wiring a practical, clean installation solution for builders and auto electricians. ECE and ADR approved, IP67 rated, and backed by a blister pack supply format. Features & Benefits No tools required — serrated plug and 3M tape allow quick, tool-free installation on trailer and truck body panels Harness system compatible — plugs directly into LED Autolamps' compatible harness systems for clean, plug-and-play wiring Clear lens with amber LED output — clean appearance when inactive; amber side marker output activates when the lamp is energised Black bezel — clean, modern finish suits a wide range of trailer and vehicle body aesthetics ECE and ADR approved — dual compliance for international and Australian road approval standards IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Technical Specs Specification Detail SKU 37AM Lamp Type Side Marker / Indicator LED Colour Amber Lens Colour Clear Bezel Colour Black Voltage Range 12V / 24V Dimensions 70mm x 35mm x 20mm Mounting Serrated plug / 3M tape (no tools) Harness Compatible Yes Protection Rating IP67 Compliance ECE / ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring quick-fit amber side marker lamps LED Autolamps harness wiring systems 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 37AM approved for road use in Australia? Yes. The 37AM carries both ECE and ADR approval, meeting international and Australian road approval standards for legal on-road use as a side marker and indicator lamp. What does "no tools required" mean for installation? The 37AM uses a serrated plug for electrical connection and 3M adhesive tape for physical mounting — both are push-and-press installations that require no drilling, cutting, or tools, making it a quick and clean fit. What is harness system compatibility? The 37AM is designed to plug directly into LED Autolamps' compatible wiring harness systems — allowing trailer lighting to be connected and disconnected cleanly without soldering or splicing.  What is the IP rating on the 37AM? The 37AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 37AM carry? Warranty information was not confirmed in available supplier data Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V LED Licence Plate Light One Lamp Required for Compliance Product Overview The LED Autolamps 35CLM is a 12/24V LED licence plate light measuring 76mm x 42mm x 30mm, ADR road approved for legal on-road use on trailers and vehicles. A single lamp is all that is required to meet ADR compliance requirements making it a straightforward, no-over-specification installation for trailers, tray bodies, and commercial vehicles. Rated IP67 and designed for surface mounting, compatible with both 12V and 24V electrical systems. Features & Benefits ADR road approved — meets Australian Design Rules for legal on-road use as a licence plate light One lamp required for ADR compliance — a single 35CLM satisfies the ADR requirement; no need to fit two lamps IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Compact 76mm x 42mm form factor — suits a wide range of trailer and vehicle rear panel installations 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Technical Specs Specification Detail SKU 35CLM Lamp Type Licence Plate Light Voltage Range 12V / 24V Dimensions 76mm x 42mm x 30mm ADR Compliance One lamp required Mounting Surface mount Protection Rating IP67 Compliance ADR Compatible With / Goes Well With Trailers, tray bodies, trucks, and commercial vehicles requiring ADR-compliant licence plate lighting 12V light vehicles and 24V heavy transport applications LED Autolamps rear combination lamps (for trailer builds requiring a separate licence plate light) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 35CLM approved for road use in Australia? Yes. The LED Autolamps 35CLM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a licence plate light. How many 35CLM lamps are required for ADR compliance? Only one lamp is required to meet ADR licence plate lighting compliance — the 35CLM is designed so a single unit satisfies the regulatory requirement. What is the IP rating on the 35CLM? The 35CLM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Does the 35CLM work on both 12V and 24V systems? Yes. It operates across 12V to 24V, making it compatible with light vehicles as well as 24V heavy transport applications without any modification. What warranty does the 35CLM carry? Warranty information was not confirmed in available supplier data — contact F.A.E. or LED Autolamps to confirm before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 48/00 Approved 12/24V Licence Plate Lamp Black Bracket, 40cm Wire, One Lamp for Compliance Product Overview The LED Autolamps 35BLM is a 12/24V LED licence plate lamp with a black bracket and 40cm pre-wired lead, measuring 76mm x 42mm x 30mm with a 64mm centre-to-centre mount. Like the 35CLM, only one lamp is required to meet ADR 48/00 compliance making it a simple, no-over-specification installation. The black bracket gives it a clean, practical appearance suited to a wide range of trailer and vehicle rear panel styles. Drawing just 0.02A at 13.8V, IP67 rated. Features & Benefits Black bracket — clean finish suits a wide range of trailer and vehicle rear panel aesthetics 40cm pre-wired cable — longer lead than the 30 series (0.14m) for more flexible routing to the number plate One lamp required for ADR compliance — a single 35BLM satisfies ADR 48/00 requirements White LED output — bright, clear white light for effective number plate illumination ADR 48/00 approved — meets Australian Design Rules for legal on-road use as a licence plate lamp IP67 rated — fully sealed against dust and water immersion Very low current draw — 0.02A at 13.8V 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 64mm centre-to-centre mount — confirm against your bracket before installation Technical Specs Specification Detail SKU 35BLM Lamp Type Licence Plate Light LED Colour White Voltage Range 12V – 24V Dimensions 76mm x 42mm x 30mm Mount Centre-to-Centre 64mm Current Draw 0.02A @ 13.8V Cable Length 0.4m Housing Colour Black Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 ADR Note One lamp required for compliance Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ADR 48/00 compliant licence plate illumination 12V light vehicles and 24V heavy transport applications LED Autolamps 35CLM (same single-lamp compliance concept, different bracket finish) LED Autolamps 30BLM (two-lamp compliance variant — smaller 65mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 35BLM lamps are required for ADR compliance? Only one lamp is required to meet ADR 48/00 compliance — a single 35BLM provides a fully compliant number plate light installation. How does the 35BLM differ from the 35CLM? The 35BLM has a black bracket and a 40cm cable, while the 35CLM's bracket colour was not confirmed. Both share the same single-lamp ADR compliance, 76mm x 42mm form factor, and 0.02A current draw What colour light does the 35BLM produce? The 35BLM produces white LED output for clear, effective number plate illumination. What is the IP rating on the 35BLM? The 35BLM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor trailer and vehicle mounting. What warranty does the 35BLM carry? Warranty information was not confirmed in available supplier data Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Stop/Tail/Indicator/Reverse Retrofit LED Lamp Hino Compatible, IP67, 5-Year Warranty Product Overview The LED Autolamps 310ARWM-2 is a retrofit LED rear combination lamp purpose-built to replace factory globe assemblies on Hino trucks. Covering stop, tail, indicator, and reverse functions with an integrated reflector, it is supplied as a pair and designed for surface mounting with a low-profile form factor that fits directly into the Hino OEM lamp position. ADR approved and rated IP67, backed by a 5-year warranty. Features & Benefits Hino retrofit — purpose-designed to replace factory globe lamp assemblies on compatible Hino trucks without modification Supplied as a pair — both lamps included for a complete left and right rear installation Stop, tail, indicator, and reverse with reflector — five functions in a direct OEM replacement unit Low-profile surface mount — matches the OEM lamp profile for a factory-standard finish ADR approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 310ARWM-2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reverse / Reflector Mounting Surface mount Protection Rating IP67 Compliance ADR Vehicle Compatibility Hino (confirm model year and variant with F.A.E.) Warranty 5 years Compatible With / Goes Well With Hino trucks requiring direct OEM globe replacement with LED rear combination lamps LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 310ARWM-2 approved for road use in Australia? Yes. The 310ARWM-2 is ADR approved, meeting Australian Design Rules requirements for legal on-road use across all five functions. Which Hino models is the 310ARWM-2 compatible with? The 310ARWM-2 is described as compatible with Hino. Confirm the specific Hino model, variant, and year range with F.A.E. or LED Autolamps before ordering to ensure a correct fitment. What does the retro-fit factory globe replacement mean? The 310ARWM-2 is engineered to drop directly into the existing Hino factory lamp housing position, replacing the incandescent globe assembly with an LED unit without requiring modifications to the vehicle body or wiring. What is the IP rating on the 310ARWM-2? The 310ARWM-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suited to truck body and transport environments. What warranty does the 310ARWM-2 carry? The 310ARWM-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 48/00 Approved 12/24V Licence Plate Lamp Chrome Base, Twin Blister, Two Required for Compliance Product Overview The LED Autolamps 30CLM is a 12/24V chrome base licence plate lamp in a compact 65mm x 30mm x 24mm steel housing, supplied as a twin blister pack. Unlike the 35CLM which requires only one lamp for ADR compliance, the 30CLM requires two lamps to meet ADR 48/00 requirements both units in the twin pack are needed for a compliant installation. Drawing just 0.02A at 13.8V, it is pre-wired with a 0.14m cable and has a 65mm centre-to-centre mount spacing. Rated IP67 and backed by a 5-year warranty. Features & Benefits Chrome base — premium finish for trailer and vehicle rear panel installations Steel housing — robust metal construction for durability in demanding transport environments Twin blister pack — both lamps supplied; both are required for ADR 48/00 compliance ADR 48/00 approved — meets Australian Design Rules for licence plate illumination; two lamps required for compliance IP67 rated — fully sealed against dust and water immersion Very low current draw — 0.02A at 13.8V for near-zero impact on vehicle electrical systems 0.14m pre-wired cable — compact cable lead for clean installation near the number plate 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 30CLM Lamp Type Licence Plate Light Voltage Range 12V – 24V Dimensions 65mm x 30mm x 24mm Mount Centre-to-Centre 65mm Current Draw 0.02A @ 13.8V Cable Length 0.14m Housing Steel, chrome base Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 ADR Note Two lamps required for compliance Packaging Blister pack (2 lamps) Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ADR 48/00 compliant licence plate illumination 12V light vehicles and 24V heavy transport applications LED Autolamps 35CLM licence plate light (single-lamp ADR compliant alternative) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 30CLM lamps are required for ADR compliance? Two lamps are required to meet ADR 48/00 compliance — the twin blister pack supplies both, so a single pack purchase provides a fully compliant installation. Is the 30CLM approved for road use in Australia? Yes. The 30CLM is ADR 48/00 approved, meeting Australian Design Rules requirements for legal on-road use as a licence plate lamp — when two units are fitted as specified. How does the 30CLM differ from the 35CLM? The 30CLM requires two lamps for ADR compliance and has a chrome base steel housing at 65mm x 30mm, while the 35CLM requires only one lamp and measures 76mm x 42mm. Both are ADR-approved licence plate lamps — choose based on your vehicle's mounting configuration and aesthetic preference. What is the current draw of the 30CLM? The 30CLM draws just 0.02A at 13.8V — an extremely low current that has virtually no impact on the vehicle's electrical system. What warranty does the 30CLM carry? The 30CLM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less