ADR Approved Stop/Tail/Indicator Assembly 72 LEDs, Black Bracket, Individual Lens Replacements, IP67 Product Overview The LED Autolamps 80BARM is a 12/24V rear combination lamp covering stop, tail, and indicator functions with 72 high-brightness LEDs in a 188mm x 100mm x 28mm black bracket assembly. Individual lens replacements allow each section to be serviced independently without replacing the full unit a significant maintenance advantage on commercial vehicle fleets. The 150mm centre-to-centre mount and pre-wired connector make installation straightforward. Carrying CRN approvals for stop/tail (CRN33059) and indicator (CRN33098), drawing 0.33A stop, 0.06A tail, and 0.31A indicator at 13.8V. Rated IP67 and backed by a 5-year warranty. Features & Benefits 72 LEDs across three functions — high LED count delivers strong, consistent stop, tail, and indicator brightness Individual lens replacements — each lens section can be replaced independently, reducing repair costs on commercial fleets ADR approved — stop/tail CRN33059 and indicator CRN33098 certified Black bracket — professional finish for trailer and truck rear panels 150mm centre-to-centre mount — confirm against your panel before installation Pre-wired surface mount — ready to connect straight out of the blister pack IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 80BARM Lamp Type Stop / Tail / Indicator LED Quantity 72 Voltage Range 12V / 24V Dimensions 188mm x 100mm x 28mm Mount Centre-to-Centre 150mm Stop Current Draw 0.33A @ 13.8V Tail Current Draw 0.06A @ 13.8V Indicator Current Draw 0.31A @ 13.8V Lens Individual replacements Housing Colour Black Mounting Surface mount Connector Pre-wired Protection Rating IP67 Stop/Tail Compliance ADR — CRN33059 Indicator Compliance ADR — CRN33098 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring a high-output rear combination lamp with serviceable lenses 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail/indicator lighting with full CRN certification LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 80BARM approved for road use in Australia? Yes. The 80BARM holds individual ADR CRN certifications — stop/tail (CRN33059) and indicator (CRN33098) — meeting Australian Design Rules requirements for legal on-road use. What does individual lens replacement mean for fleet maintenance? Each lens section in the assembly can be replaced independently — if a lens is damaged, only that section needs to be replaced rather than the entire lamp unit, reducing parts costs and downtime on commercial fleets. How does the 80BARM compare to the 200BSTIM? The 80BARM is 188mm x 100mm with 72 LEDs and individual lens replacements. The 200BSTIM is the standard 200mm x 50mm rectangular form factor. The 80BARM suits applications requiring a wider, higher LED-count lamp with field-serviceable lenses. What is the IP rating on the 80BARM? The 80BARM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 80BARM carry? The 80BARM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

220lm Natural White Small Round LED Lamp Interior/Exterior, IP67, 4500K, 10–30V Product Overview The LED Autolamps 7610WM is a small round low-profile LED lamp delivering 220 effective lumens at 4500K natural white with 66 lux at 1 metre suited to interior and exterior lighting on trucks, caravans, trailers, and commercial vehicles. The round form factor and IP67 rating make it equally at home on a cabin ceiling or an exposed exterior panel. Operating across a wide 10–30V range and backed by a 2-year warranty. Features & Benefits 220 effective lumens — practical light output for small interior spaces and exterior task lighting 4500K natural white — balanced colour temperature suited to both living and working interior environments 66 lux at 1 metre — verified illuminance for real-world brightness assessment IP67 rated — fully sealed against dust and water immersion; suitable for interior and exterior use Low-profile round design — compact form factor mounts neatly on ceilings and panels Wide voltage range 10–30V — compatible with 12V and 24V vehicle and equipment electrical systems 2-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 7610WM Lamp Type Interior / Exterior Colour Temperature 4500K Natural White Effective Lumens 220 lm Illuminance 66 lux @ 1m Voltage Range 10V – 30V Profile Low profile round Protection Rating IP67 Warranty 2 years Compatible With / Goes Well With Truck cabs, caravan interiors, canopy interiors, and commercial vehicle cabins 12V and 24V vehicle and equipment electrical systems LED Autolamps 16606WM small oval lamp (similar output level, oval form factor) LED Autolamps 13118WM round interior lamp (same round concept, larger format) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions How does the 7610WM compare to the 16606WM? The 7610WM is a small round lamp producing 220lm at 66 lux @ 1m, while the 16606WM is a small oval producing 240lm at 74 lux @ 1m. Both have 4500K output and IP67 — choose based on whether a round or oval form factor suits the mounting position better. Can the 7610WM be used in exterior applications? Yes. With an IP67 rating, it is fully sealed against dust and water immersion — suitable for both interior and exposed exterior mounting. What colour temperature does the 7610WM produce? It produces 4500K natural white — a balanced tone suited to working and living spaces in vehicles and caravans. What voltage range does the 7610WM support? It operates across 10V to 30V, compatible with 12V and 24V electrical systems across a broad input range. What warranty does the 7610WM carry? The 7610WM is backed by a 2-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Compact 12W Flood & Reverse Lamp 489 Lumens, ECE Approved, IP67, Saltwater Resistant, Adjustable Bracket. Product Overview The LED Autolamps 7312BM is a 12-watt compact LED flood and reverse lamp with a black die-cast alloy square housing, delivering 489 effective lumens from high-brightness 3-watt LEDs. Measuring just 73mm x 73mm x 31mm, the 7312BM is a versatile compact work lamp suited to reverse lamp applications (ECE 1/00 approved), flood lighting on machinery and commercial vehicles, and any application requiring a small, powerful, weatherproof LED lamp. The black die-cast alloy housing and stainless steel fittings provide corrosion resistance beyond standard IP67 weatherproofing the 7312BM is specifically noted as tolerant to acidic and alkaline conditions and resistant to sea spray and salt water, making it an ideal choice for marine, coastal, and agricultural applications. An adjustable bracket mount with stainless steel fittings allows precise flood angle adjustment. Pre-wired with a 40cm cable, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single unit in blister packaging. Key Specifications Functions: Flood lamp / reverse lamp (ECE 1/00 approved) Wattage: 12W Effective lumens: 489lm LED type: 3W high-brightness LEDs Housing: Black die-cast alloy Fittings: Stainless steel Dimensions: 73mm x 73mm x 31mm Cable: 40cm Mount type: Adjustable bracket stainless steel fittings IP rating: IP67 Input voltage: 9–30V DC (multivolt) ECE compliance: ECE 1/00 (reverse function) Special resistance: Sea spray, salt water, acidic and alkaline conditions Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 7312BM Features & Benefits ECE 1/00 reverse lamp approved: Certified for legal use as a reverse lamp on Australian road vehicles and trailers dual function as both a flood work lamp and a compliant reverse lamp 489 effective lumens from 3W LEDs: High-brightness 3-watt LEDs deliver impressive output for such a compact 73mm x 73mm form factor Black die-cast alloy housing: Premium alloy construction provides superior heat dissipation, impact resistance, and corrosion resistance compared to plastic housings Saltwater and corrosion resistant: Specifically tested for sea spray, salt water, and acidic/alkaline environment resistance ideal for marine, coastal, and agricultural applications Stainless steel fittings: Bracket hardware and fittings resist rust and corrosion in outdoor and marine environments Adjustable bracket mount: Allows flood angle to be set for the specific application then locked into position 9–30V broad voltage range: Covers virtually all 12V and 24V vehicle and equipment electrical systems IP67 waterproof: Completely sealed against dust and temporary water immersion 40cm cable: Sufficient length for most mounting and wiring scenarios 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 7312BM Brand LED Autolamps Function Flood Lamp / Reverse Lamp (ECE 1/00) Wattage 12W Effective Lumens 489lm LED Type 3W high-brightness Housing Black Die-Cast Alloy Fittings Stainless Steel Dimensions 73mm x 73mm x 31mm Cable Length 40cm Mount Type Adjustable bracket stainless steel IP Rating IP67 Input Voltage 9–30V DC (multivolt) ECE Compliance ECE 1/00 (Reverse) Special Resistance Sea spray, salt water, acidic/alkaline conditions Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits all 9–30V vehicles and equipment requiring compact flood or reverse lighting including: Trucks, trailers, and commercial vehicles (reverse lamp) Marine and boat applications Agricultural machinery Construction and mining equipment 4WD and off-road vehicles requiring compact work lamps Coastal and marine environment vehicles Frequently Asked Questions Can this lamp be used as both a flood lamp and a reverse lamp? Yes the 7312BM is approved under ECE 1/00 for reverse lamp use, and its 489-lumen flood output makes it equally suited to work lamp and flood lighting applications. Choose the application that suits your installation. What makes this lamp suitable for marine and coastal use? Beyond IP67 protection, the 7312BM is specifically designed to tolerate sea spray, salt water, and acidic/alkaline conditions making it more suitable for marine, coastal, and agricultural environments than standard IP67-only lamps. What is the wattage and lumen output? The 7312BM is 12W total, delivering 489 effective lumens from high-brightness 3W LEDs a strong output for such a compact 73mm x 73mm housing. What voltage systems does this lamp suit? The 7312BM operates on 9–30V DC, covering virtually all 12V and 24V vehicle and equipment electrical systems with margin above and below standard nominal voltages. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Compact LED Licence Plate Light ECE Approved, IP67, 12V or 24V, Two Required for ADR Compliance. Product Overview The LED Autolamps 60BLMB is a compact LED licence plate light designed for trailers, caravans, trucks, and commercial vehicles requiring ECE-approved licence plate illumination. Measuring just 60mm x 22mm x 22mm, this revolutionary low-profile design saves significant installation time compared to traditional licence plate lamp housings. Important compliance note: two lights are required for ADR compliance this is a single unit, and a matching pair must be installed to meet Australian Design Rule requirements for licence plate illumination. ECE approved (E9 L00 1066), IP67 rated, and operating on both 12V and 24V systems with an ultra-low 0.04A current draw, the 60BLMB is supplied with a 0.1m (10cm) cable. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Licence plate light Dimensions: 60mm x 22mm x 22mm Mounting centre-to-centre: 22mm Cable length: 0.1m (10cm) Current draw: 0.04A @ 13.8V IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE E9 L00 1066 Warranty: 5 years Important: Two lights required for ADR compliance sold as single unit Brand: LED Autolamps SKU: 60BLMB Features & Benefits Revolutionary compact design: Ultra-compact 60mm x 22mm x 22mm footprint saves significant time on installation compared to traditional licence plate lamp housings ECE approved: Certified under ECE E9 L00 1066 for legal compliance as a licence plate light Ultra-low current draw: Just 0.04A at 13.8V, placing minimal load on the vehicle's electrical system IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 60BLMB Brand LED Autolamps Function Licence Plate Light Dimensions 60mm x 22mm x 22mm Mounting Centre-to-Centre 22mm Cable Length 0.1m (10cm) Current Draw 0.04A @ 13.8V IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ECE E9 L00 1066 Warranty 5 Years Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ECE-approved licence plate illumination including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions How many of these lights do I need? Two lights are required for ADR compliance. This listing is for a single unit purchase two to meet Australian legal requirements for licence plate illumination. Is this lamp ECE approved? Yes the 60BLMB is approved under ECE E9 L00 1066 for licence plate light compliance. What is the current draw of this lamp? Just 0.04A at 13.8V an extremely low electrical load, ideal for installations with multiple lamps on the same circuit. What cable length is supplied? A 0.1m (10cm) cable is included. Confirm this is sufficient for your specific installation, or plan for a cable extension if required. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm you are purchasing the correct quantity (two units) for ADR compliance before ordering. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Reverse Lamp with Diffused Tail Function Coloured Lens, 12/24V Product Overview The LED Autolamps 595WM is a single ECE-approved reverse lamp with diffused tail function and coloured lens, in the 595 Jumbo series format. The diffused tail function delivers a smooth, even light spread rather than individual LED points suited to Jumbo trailer and truck body rear installations requiring a clean, premium reverse lamp appearance. 12/24V multivolt and backed by a 5-year warranty. Features & Benefits Diffused tail function — smooth, even light output for a premium appearance Coloured lens — defined lens appearance when active Single lamp — sold individually for replacement or standalone reverse lamp installations ECE approved — meets international road approval standards for legal on-road use as a reverse lamp 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 595WM Lamp Type Reverse Tail Function Diffused Lens Coloured Voltage Range 12V / 24V Compliance ECE Packaging Blister Warranty 5 years Compatible With / Goes Well With Wide-body trucks, semi-trailers, and commercial vehicles requiring a standalone reverse lamp 12V and 24V vehicle electrical systems LED Autolamps 595BARWM (same 595 Jumbo series — combination lamp including reverse) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 595WM approved for road use in Australia? Yes. The 595WM is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as a reverse lamp. What does the diffused tail function mean on a reverse lamp? The diffused function delivers a smooth, even spread of light rather than showing individual LED point sources through the lens — giving a cleaner, more premium appearance when the lamp is active. What are the dimensions of the 595WM? Dimensions were not confirmed in available supplier data — verify with LED Autolamps before ordering. What is the IP rating on the 595WM? IP rating was not confirmed in available supplier data — verify before use in exposed or wet environments. What warranty does the 595WM carry? The 595WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Triple Jumbo Stop/Tail/Indicator Twin Pack Sequential Indicator, Diffused Tail, Clear Lens Product Overview The LED Autolamps 595STIM3-2 is a triple-module Jumbo rear combination lamp twin blister pack covering stop, tail, and indicator with sequential indicator function and diffused tail. The triple module design features three individually surface-mountable lamp sections, supplied as a pair (LHS and RHS) for a complete left and right rear installation. The clear lens gives a clean, modern appearance when inactive. ECE road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Triple-module design — three individually surface-mountable lamp sections in the Jumbo format for a high-density rear lighting footprint Sequential indicator — LEDs sweep progressively for a modern, premium directional effect Diffused tail function — smooth, even tail light output across the clear lens face Clear lens — clean, modern appearance when inactive; function colours activate when energised LHS and RHS twin blister — both lamps supplied for a complete left and right rear installation Low-profile design — slim form factor suited to Jumbo trailer and vehicle rear panels ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 595STIM3-2 Pack Contents 2 lamps (LHS + RHS) Series Jumbo Lamp Type Stop / Tail / Indicator Module Count Triple (3 sections) Indicator Type Sequential Tail Function Diffused Lens Clear Voltage Range 12V / 24V Mounting Individual surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Wide-body trucks, semi-trailers, and heavy commercial vehicles requiring triple-module Jumbo rear lighting 12V and 24V vehicle electrical systems LED Autolamps 595BARWM (same Jumbo series, full combination including reverse) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 595STIM3-2 approved for road use in Australia? Yes. The 595STIM3-2 is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. What does the triple module design mean? The 595STIM3-2 consists of three individual lamp sections that can each be surface mounted independently, giving installers flexibility in placement across wide trailer and truck body rear panels. Does the 595STIM3-2 include a reverse function? No. The 595STIM3-2 covers stop, tail, and indicator only. A separate reverse lamp is required if reverse function is needed. What does the sequential indicator look like? The sequential indicator sweeps its LEDs progressively across the lamp face in a directional wave — a modern, distinctive effect compared to standard uniform flashing. What warranty does the 595STIM3-2 carry? The 595STIM3-2 is backed by a 5-year warranty from LED Autolamps.

Read more less

ADR Approved 12/24V Front Outline Position Marker 2 White LEDs, Clip-In Lens, IP67 Product Overview The LED Autolamps 58WM is a 12/24V front outline position marker lamp with 2 white LEDs and a clear clip-in replaceable lens, measuring 58mm x 35mm x 21mm in a black housing with a 28mm centre-to-centre mount. Completing the 58 series alongside the 58AM and 58ARM, it is the front position marker counterpart for trailer and truck body end-of-vehicle marking. Approved under CRN36842, pre-wired, IP67 rated, and backed by a 5-year warranty. Features & Benefits 2 white LEDs — clean, bright front position marker output through a clear clip-in lens Clear clip-in replaceable lens — lens swaps independently without removing the full housing from the panel Compact 58mm x 35mm form factor — matches the 58AM and 58ARM for a consistent marker lamp appearance across the vehicle ADR approved — certified under CRN36842 for legal on-road use as a front outline position marker Very low current draw — 0.05A at 13.8V IP67 rated — fully sealed against dust and water immersion Pre-wired — ready to connect on installation 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 58WM Lamp Type Front Outline Position Marker LED Quantity 2 LED Colour White Lens Colour Clear Housing Colour Black Voltage Range 12V / 24V Dimensions 58mm x 35mm x 21mm Mount Centre-to-Centre 28mm Current Draw 0.05A @ 13.8V Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR — CRN36842 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring front outline position marker lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 58AM side direction indicator (same 58mm x 35mm form factor) LED Autolamps 58ARM red/amber side marker (same form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 58WM approved for road use in Australia? Yes. The 58WM is ADR approved under CRN36842, meeting Australian Design Rules requirements for legal on-road use as a front outline position marker lamp. How does the 58WM complete the 58 series? The 58WM is the front position marker in the 58 series, joining the 58AM (side indicator) and 58ARM (red/amber side marker) — all sharing the same 58mm x 35mm x 21mm black housing, clip-in lens, and 28mm mount spacing for a consistent appearance across all marker positions. What does the clear lens mean for output colour? The clear lens allows the white LED output to show without colour filtering — providing a clean, bright appearance both when active and when inactive. What is the IP rating on the 58WM? The 58WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 58WM carry? The 58WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Compact ADR-Approved Rear Position Marker with Replaceable Lens Reliable, Low-Profile, and Budget-Smart. Product Overview The LED Autolamps 58RM is a compact rear position marker from the LED Autolamps budget range, designed for trucks, trailers, caravans, and commercial vehicles requiring ADR-compliant rear marking at an accessible price point. Fitted with 2 red LEDs and supplied pre-wired with a 40cm lead, it is surface-mounted with a 28mm centre-to-centre fixing distance and draws just 0.12A at 13.8V a minimal load well suited to multi-marker trailer installations and dual battery touring builds. The clip-in replaceable lens is a standout feature at this price point when a lens is cracked or discoloured in service, it can be swapped out independently without replacing the entire lamp body. ADR compliance to CRN 36840 and ADR 49/00, IP67 waterproof rating, and a 5-year warranty round out a marker light that punches well above its budget positioning. Key Specifications LED count: 2 red LEDs Colour: Red Light style: Rear position marker Voltage: 12V – 24V IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR 49/00, CRN 36840 Mount type: Surface mount Mount centre to centre: 28mm Connector: Pre-wired, 40cm wire lead Replaceable lens: Yes (clip-in) Housing colour: Black Dimensions: 58mm (L) × 35mm (W) × 21mm (D) Current draw: 0.12A @ 13.8V Packaging: Blister pack Warranty: 5 years Features & Benefits Clip-In Replaceable Lens — The lens can be removed and replaced independently if cracked or damaged in service — an unusual and valuable feature in the budget marker category that dramatically reduces the cost of maintaining a compliant multi-lamp trailer fitout over the long term. ADR Compliant — CRN 36840 & ADR 49/00 — Full ADR road approval for use as a rear position marker on Australian registered vehicles. Specific compliance codes are on-page for fleet documentation and inspection purposes. IP67 Waterproof and Dustproof — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes. Built for wash-downs, rain, and the wet and dusty conditions encountered in Australian transport and touring environments. Pre-Wired 40cm Lead — Supplied ready to connect with a 40cm wire lead — no in-field termination required, reducing installation time on multi-marker trailer and truck builds. Low 0.12A Current Draw — Minimal electrical load per marker suits high-density marker installations common on long trailers and road trains, and reduces total draw on dual battery and solar-powered touring setups. Low Profile Surface Mount — The compact 58mm × 35mm × 21mm footprint sits close to the trailer or vehicle body, reducing exposure to impact damage at loading docks and in tight clearance environments. Clip-In Replacement Lens Availability — Spare lenses can be ordered separately as replacement parts, supporting long-term cost-effective maintenance without full lamp replacement. 5-Year Warranty — A strong warranty commitment for a budget-positioned product, providing confidence in LED Autolamps' build quality across the full range — not just the premium tier. Technical Specs Specification Detail Brand LED Autolamps Part Number 58RM LED Count 2 Colour Red Light Style Rear Position Marker Light Type LED Voltage 12V – 24V IP Rating IP67 Compliance ADR 49/00 / CRN 36840 Mount Type Surface Mount Mount Centre to Centre 28mm Connector Pre-Wired, 40cm Lead Replaceable Lens Yes (Clip-In) Housing Colour Black Length 58mm Width 35mm Depth 21mm Current Draw 0.12A @ 13.8V Packaging Blister Pack Inner Carton Qty 50 Outer Carton Qty 100 Warranty 5 Years Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) B-doubles and road trains requiring multiple rear markers Caravans and camper trailers Box trailers and flatbed trailers Horse floats and stock trailers Horse floats and stock trailers Commercial vehicles requiring ADR 49/00 rear position markers Custom trailer builds on a budget Pairs well with: LED Autolamps amber front and side position markers for a matched full-trailer LED fitout LED Autolamps combination stop/tail/indicator lamp assemblies LED Autolamps 58RM replacement lens kits (clip-in, sold separately) LED Autolamps clearance lights and number plate lights Frequently Asked Questions Is the 58RM ADR compliant for use as a rear position marker on Australian vehicles? Yes. The 58RM carries ADR approval under ADR 49/00 with compliance code CRN 36840, confirming it is road-legal for use as a rear position marker on Australian registered vehicles. What does the clip-in replaceable lens allow you to do? The clip-in lens can be removed and replaced separately if it becomes cracked, discoloured, or damaged — without replacing the entire marker lamp. Replacement lenses are available separately from the LED Autolamps range. How long is the pre-wired lead on the 58RM? The 58RM is supplied pre-wired with a 40cm wire lead. Confirm this length is sufficient for your specific mounting location and wiring run before purchasing. Extension leads may be required in some applications. What current does the 58RM draw, and is it suitable for multi-marker trailer builds? The 58RM draws 0.12A at 13.8V per lamp — a very low draw that makes it well-suited to multi-marker installations common on long trailers and road trains, with minimal total impact on the vehicle's electrical system. What is the difference between the "budget range" and the premium LED Autolamps markers? The 58RM is positioned in the LED Autolamps budget range, offering ADR compliance, IP67 rating, and a 5-year warranty at a lower price point. Premium-range LED Autolamps markers may offer higher LED counts, greater lumen output, or additional construction features. Confirm specific performance differences with LED Autolamps for your application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Side Direction Indicator 3 LEDs, Clip-In Replaceable Lens, IP67 Product Overview The LED Autolamps 58AM is a 12/24V amber side direction indicator lamp with 3 LEDs and a clip-in replaceable lens, measuring 58mm x 35mm x 21mm in a black housing with a 28mm centre-to-centre mount. The same compact form factor as the 58ARM, it is purpose-built for side indicator use and approved under CRN38277 and ADR 6/00. Pre-wired, IP67 rated, and backed by a 5-year warranty. Features & Benefits 3 LED amber indicator output — clean, compliant amber side direction indicator function Clip-in replaceable lens — lens swaps independently without removing the full lamp housing from the panel Compact 58mm x 35mm form factor — low-profile surface mount suits a wide range of trailer and truck body side positions ADR approved — certified under CRN38277 and ADR 6/00 for legal on-road use as a side direction indicator IP67 rated — fully sealed against dust and water immersion Pre-wired — ready to connect on installation 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 58AM Lamp Type Side Direction Indicator LED Quantity 3 LED Colour Amber Housing Colour Black Voltage Range 12V / 24V Dimensions 58mm x 35mm x 21mm Mount Centre-to-Centre 28mm Current Draw 0.1A @ 13.8V Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR 6/00 — CRN38277 Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring side direction indicator lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 58ARM red/amber side marker (same 58mm x 35mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 58AM approved for road use in Australia? Yes. The 58AM is ADR approved under CRN38277 and ADR 6/00, meeting Australian Design Rules requirements for legal on-road use as a side direction indicator lamp. How does the 58AM differ from the 58ARM? The 58AM is an amber-only side direction indicator certified under ADR 6/00, while the 58ARM is a red/amber dual-colour side marker certified under ADR 45/01. Both share the same 58mm x 35mm x 21mm form factor, clip-in lens, and 0.1A current draw. What does the clip-in lens mean for maintenance? The lens clips out independently, allowing replacement without removing the full lamp housing — reducing maintenance time and cost. What is the IP rating on the 58AM? The 58AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 58AM carry? The 58AM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Red Rear End Outline Marker Twin Pack No-Fastener Fit, 50x25mm, IP67 Product Overview The LED Autolamps 5025RM2 is a red rear end outline marker lamp supplied as a twin blister pack, measuring 50mm x 25mm x 21mm with a non-fastener fitting design that eliminates the need for screws or fixings during installation. The compact, low-profile form factor suits a wide range of trailer, caravan, and truck body edge-marking applications. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Non-fastener fitting design — installs without screws or fixings, saving time and simplifying installation on trailer and caravan body panels Twin blister pack — both lamps supplied for a complete left and right installation Low-profile compact 50mm x 25mm form factor — suits tight edge-marking positions on trailer bodies and caravans ADR approved — meets Australian Design Rules for legal on-road use as a rear end outline marker IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 5025RM2 Pack Contents 2 lamps Lamp Type Rear End Outline Marker LED Colour Red Voltage Range 12V / 24V Length 50mm Width 25mm Depth 21mm Mounting Non-fastener (no screws required) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring compact rear end outline marker lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear marker lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 5025RM2 approved for road use in Australia? Yes. The 5025RM2 is ADR approved, meeting Australian Design Rules requirements for legal on-road use as a rear end outline marker lamp. How does the non-fastener fitting work? The lamp is designed to fit without screws or traditional fasteners — it clips or presses into the mounting position, significantly reducing installation time compared to screw-mounted markers. What does the twin blister pack include? The pack contains two lamps for a complete left and right rear end outline marker installation. What is the IP rating on the 5025RM2? The 5025RM2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 5025RM2 carry? The 5025RM2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Reverse Lamp with Inbuilt Reflex Reflector Bracket Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 460WM is a 12/24V reverse lamp with an integrated reflex reflector, measuring 148mm x 122mm x 30mm and supplied with a bracket for individually mountable surface installation. The inbuilt reflector adds passive rear visibility and compliance without requiring a separate reflector unit suited to trucks, trailers, and commercial vehicles requiring a standalone reverse lamp in the 460 series format. IP67 rated and backed by a 5-year warranty. Features & Benefits Inbuilt reflex reflector — integrated passive reflector adds rear visibility and compliance in a single fitting Individually mountable with bracket — supplied with a bracket for independent surface mounting on trailer and truck body panels 148mm x 122mm form factor — sized to suit the 460 series Medium Jumbo lamp family IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460WM Lamp Type Reverse / Reflector Voltage Range 12V / 24V Dimensions 148mm x 122mm x 30mm Mounting Surface mount with bracket Reflector Inbuilt reflex Protection Rating IP67 Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring a standalone reverse lamp in the 460 series format 12V light vehicles and 24V heavy transport applications LED Autolamps 460ARRM (stop/tail/indicator — same 460 series; add 460WM for reverse) LED Autolamps 460ARWM (full combination including reverse — alternative to pairing 460ARRM + 460WM) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What road approval standard does the 460WM carry? Compliance certification was not confirmed in available supplier data — verify before road use. How does the 460WM pair with the 460ARRM? The 460ARRM covers stop, tail, and indicator functions. Adding the 460WM provides the reverse function separately — a practical option when mounting flexibility or separate circuit control of the reverse function is required. What does the inbuilt reflex reflector provide? The integrated reflector passively reflects light from other vehicles back towards the source, adding rear visibility and compliance without needing a separate reflector unit. What is the IP rating on the 460WM? The 460WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 460WM carry? The 460WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Rear Stop Lamp with Inbuilt Reflex Reflector Bracket Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 460RM is a 12/24V rear stop lamp with an integrated reflex reflector, measuring 148mm x 122mm x 30mm and supplied with a bracket for individually mountable surface installation. Matching the 460WM reverse lamp in form factor, it suits 460 series builds where individual lamp functions are mounted separately rather than as a single combination unit. IP67 rated and backed by a 5-year warranty. Features & Benefits Rear stop function — dedicated stop lamp for installations requiring individual function mounting Inbuilt reflex reflector — integrated passive reflector adds rear visibility and compliance without a separate unit Individually mountable with bracket — supplied with a bracket for independent surface mounting 148mm x 122mm form factor — matches the 460WM for a uniform appearance across the 460 series IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460RM Lamp Type Stop / Reflector Voltage Range 12V / 24V Dimensions 148mm x 122mm x 30mm Mounting Surface mount with bracket Reflector Inbuilt reflex Protection Rating IP67 Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring individually mounted stop lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 460WM reverse lamp (same 148x122mm form factor) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps 460ARRM and 460ARWM combination lamps (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What road approval standard does the 460RM carry? Compliance certification was not confirmed in available supplier data — verify before road use. How does the 460RM fit with the 460 series? The 460RM is the dedicated stop lamp in the 460 series, matching the 460WM reverse lamp in the same 148mm x 122mm x 30mm form factor — suited to builds where individual lamp functions are preferred over a single combination unit. What does the inbuilt reflex reflector provide? The integrated reflector passively reflects light from other vehicles back towards the source, adding rear visibility and compliance without needing a separate reflector unit. What is the IP rating on the 460RM? The 460RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 460RM carry? The 460RM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less