12/24V Rear Indicator Lamp with Inbuilt Reflex Reflector Individually Mountable, IP67, 5-Year Warranty Product Overview The LED Autolamps 460AM is a 12/24V rear indicator lamp with an integrated reflex reflector, designed for individually mountable surface installation via an included bracket. The inbuilt reflector adds passive rear visibility and compliance without requiring a separate reflector unit. IP67 rated and backed by a 5-year warranty. Features & Benefits Inbuilt reflex reflector — integrated passive reflector adds rear visibility and compliance in a single fitting Individually mountable with bracket — supplied with a bracket for flexible surface mounting on trailer and truck body panels IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460AM Lamp Type Rear Indicator / Reflector Voltage Range 12V / 24V Mounting Surface mount with bracket Protection Rating IP67 Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring individually mounted rear indicator lamps 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What road approval standard does the 460AM carry? Compliance certification was not confirmed in available supplier data — verify before road use. What does the inbuilt reflex reflector provide? The reflector is a passive element that reflects light from other vehicles back towards the source, providing additional rear visibility and passive compliance without a separate reflector unit. What does individually mountable mean? The 460AM comes with a bracket allowing it to be surface mounted independently on trailer and truck body panels rather than as part of a multi-lamp assembly. What is the IP rating on the 460AM? The 460AM is rated IP67 — fully sealed against dust and capable of withstanding water immersion. What warranty does the 460AM carry? The 460AM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Interior LED Strip Lamp with Touch Switch Aluminium Housing, Polycarbonate Lens, 3-Year Warranty Product Overview The LED Autolamps 40260MCU is a 12/24V interior LED strip lamp with a built-in touch sensor switch, housed in an aluminium body with a polycarbonate lens. The slim, low-profile design suits caravan, truck cab, motorhome, and commercial vehicle interior installations — available in black or silver finish to match a range of interior styles. The touch switch provides convenient on/off control directly at the fitting. Backed by a 3-year warranty. Features & Benefits Built-in touch sensor switch — on/off control integrated directly into the lamp for convenient hands-free operation Aluminium housing — robust, lightweight housing with superior heat dissipation compared to plastic housings Polycarbonate lens — impact-resistant lens with good optical clarity Black or silver finish — two colour options to match different caravan and vehicle interior aesthetics Low-profile slimline design — sits neatly on ceilings and panels without bulk High-brightness SMD LEDs — even, consistent interior illumination 12/24V dual voltage — compatible with both 12V and 24V vehicle and equipment electrical systems 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 40260MCU Lamp Type Interior Strip Lamp Switch Built-in touch sensor Housing Material Aluminium Lens Material Polycarbonate Finish Options Black or Silver Voltage Range 12V / 24V Warranty 3 years Shipping Weight 0.155 kg Compatible With / Goes Well With Caravan interiors, truck cabs, motorhomes, and commercial vehicle cabins 12V and 24V vehicle and equipment electrical systems LED Autolamps 16606WM-SW small oval touch switch lamp (same touch concept, different form factor) LED Autolamps 20109WM-SW large oval touch switch lamp (same touch concept, different form factor) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions What colours is the 40260MCU available in? The 40260MCU is available in black or silver finish. How does the touch switch work? The touch sensor is integrated into the lamp body — a light touch activates or deactivates the lamp without a separate wall switch, making it ideal for caravan and vehicle interior applications. What are the benefits of an aluminium housing? Aluminium dissipates heat more effectively than plastic, helping maintain LED performance and extending lamp life — particularly useful in enclosed interior spaces where heat can accumulate. What voltage range does the 40260MCU support? It operates across 12V to 24V, making it compatible with both 12V caravan and vehicle systems and 24V commercial vehicle and heavy transport electrical systems. What warranty does the 40260MCU carry? The 40260MCU is backed by a 3-year warranty from LED Autolamps. Weight 0.155 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

One Lamp, Four Functions ADR-Approved Combination Tail Lighting Built for Trucks, Trailers, and Touring Caravans. Product Overview The LED Autolamps 283ARWM is a 4-in-1 combination LED tail lamp delivering stop, tail, indicator, and reverse lighting from a single compact unit. Designed for trucks, semi-trailers, caravans, and heavy vehicles, it consolidates four compliance-critical rear lighting functions into one ADR-approved assembly reducing installation complexity, minimising wiring runs, and cutting the number of separate lamps required to meet Australian road regulations. At 283mm long and just 25mm deep, the 283ARWM is low-profile enough for flush trailer body mounting while the removable bracket offers flexible installation options across a range of vehicle and trailer configurations. Inbuilt reflectors eliminate the need for a separate rear reflector, keeping the installation clean and compliant. Dual voltage operation across 12V and 24V suits the full range of Australian commercial and recreational vehicles, and the IP67 rating and 5-year warranty back it for the long haul. Key Specifications Light functions: Stop / Tail / Indicator / Reverse (4-in-1) Voltage: 12V / 24V (dual voltage) IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR Road Approved Mount type: Screw or bolt mounting with removable bracket Inbuilt reflectors: Yes Dimensions: 283mm (L) × 100mm (W) × 25mm (D) Light type: LED Warranty: 5 years Features & Benefits 4-in-1 Combination Function — Stop, tail, indicator, and reverse in a single lamp assembly. One unit replaces up to four separate lamps, cutting installation time, reducing cable complexity, and simplifying compliance checks on trucks, trailers, and caravans. Inbuilt Reflectors — Factory-integrated reflectors meet ADR rear reflector requirements without needing a separate unit, reducing the total number of components on the vehicle and delivering a cleaner finished installation. ADR Road Approved — Meets Australian Design Rules for all four lighting functions, confirming full road-legal compliance from the moment it's fitted — no third-party sign-off required. IP67 Waterproof Rating — Fully sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes. Built for the wash-downs, creek crossings, and heavy rain encountered on Australian work and touring vehicles. 12V / 24V Dual Voltage — Works natively across both light vehicle and heavy transport electrical systems without modification — a single SKU for your entire fleet or mixed-vehicle setup. Removable Mounting Bracket — The bracket can be fitted or removed to suit different trailer body profiles and mounting configurations, giving installers flexibility without compromising the lamp's ADR approval. Low Profile 25mm Depth — At just 25mm deep, the 283ARWM sits close to the trailer or vehicle body, reducing the risk of impact damage on tight loading docks, underbody clearance situations, and reversing manoeuvres. 5-Year Warranty — Backed by one of the stronger warranties in the combination lamp category, reflecting LED Autolamps' confidence in the product's durability across demanding Australian operating conditions. Technical Specs Specification Detail Brand LED Autolamps Part Number 283ARWM Light Functions Stop / Tail / Indicator / Reverse Light Type LED Voltage 12V / 24V (Dual Voltage) IP Rating IP67 Compliance ADR Road Approved Mount Type Screw or Bolt — Removable Bracket Inbuilt Reflectors Yes Length 283mm Width 100mm Depth 25mm Warranty 5 Years Lumen Output Not specified — confirm with LED Autolamps Current Draw Not specified — confirm with LED Autolamps Lens Colour Not specified — confirm with LED Autolamps Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) B-doubles and road trains Caravans and camper trailers Box trailers and flatbed trailers Horse floats and stock trailers Buses and coaches Heavy haulage and plant transport vehicles Custom trailer builds requiring ADR-compliant combination rear lighting Pairs well with: LED Autolamps front and side marker lights for a matched full-vehicle LED lighting upgrade LED Autolamps wiring harness accessories LED Autolamps clearance lights and number plate lights Frequently Asked Questions What lighting functions does the 283ARWM provide? The 283ARWM is a 4-in-1 combination lamp providing stop, tail, indicator, and reverse lighting from a single unit — covering all four primary rear lighting compliance functions required under Australian road regulations. Does this lamp comply with Australian road regulations? Yes. The 283ARWM carries full ADR (Australian Design Rules) approval for all four lighting functions, including inbuilt reflectors, making it road-legal for use on vehicles operated on Australian public roads and highways. What does the removable bracket allow for installation? The removable bracket provides flexibility for different trailer body profiles and mounting surfaces. The lamp can be installed directly with screws or bolts, or using the bracket for surface-mounted or recessed applications depending on the vehicle or trailer configuration. Is this lamp suitable for both 12V caravans and 24V trucks? Yes. The 283ARWM operates across 12V and 24V without modification, making it suitable for use on both light recreational vehicles and heavy commercial transport in a single SKU. What does the IP67 rating mean for a tail lamp in outdoor use? IP67 means the lamp is completely sealed against dust and can withstand water immersion to 1 metre for 30 minutes — protecting against rain, wash-downs, creek crossings, and the high-pressure cleaning common in fleet and transport maintenance environments. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved MaxiLED Rear Combination Lamp Grey Housing, 275x100x33mm, IP67, 5-Year Warranty Product Overview The LED Autolamps 275GARWM is a 12/24V MaxiLED rear combination lamp covering stop, tail, indicator, and reverse functions in a 275mm x 100mm x 33mm grey housing. The grey base distinguishes this variant from the black housing versions in the 275 series suited to caravans and trailers where a lighter-toned rear panel aesthetic is preferred. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Grey housing — lighter finish suits caravans, white-panelled trailers, and builds where a grey or neutral base colour is preferred MaxiLED high-brightness LEDs — enhanced LED output across stop, tail, indicator, and reverse functions Stop, tail, indicator, and reverse in one lamp — four rear lighting functions in a single 275mm unit 33mm depth — slightly deeper than the standard 275 series 22mm variants; confirm fitment against your panel before ordering ADR road approved — meets Australian Design Rules for legal on-road use across all four functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 275GARWM Series MaxiLED Lamp Type Stop / Tail / Indicator / Reverse Voltage Range 12V / 24V Dimensions 275mm x 100mm x 33mm Housing Colour Grey Mounting Surface mount Protection Rating IP67 Compliance ADR Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Caravans, trailers, and light commercial vehicles requiring a wide-format four-function rear lamp with a grey finish 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear combination lighting LED Autolamps 275ARWM (same functions, black housing, 22mm depth) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 275GARWM approved for road use in Australia? Yes. The LED Autolamps 275GARWM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across all four functions. How does the 275GARWM differ from the 275ARWM? The 275GARWM has a grey housing and is 33mm deep, while the 275ARWM has a black housing and is 22mm deep. Both cover the same four rear lighting functions in the 275mm x 100mm form factor. What functions does the 275GARWM cover? It combines stop, tail, indicator, and reverse in a single surface-mount unit. What is the IP rating on the 275GARWM? The 275GARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 275GARWM carry? The 275GARWM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/ADR Approved 12V Reverse Strip Light Ultra-Slim 3mm, 237mm, IP67 Product Overview The LED Autolamps 235W12E is a 12V white LED reverse strip light measuring 237mm x 25mm x 3mm, sharing the same ultra-slim form factor as the 235A12 indicator strip. Designed for flush recessed mounting, it completes the 235 series strip lamp range with a reverse function drawing just 0.12A at 13.8V for efficient operation. ECE and ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Ultra-slim 3mm depth — flush recessed mount for a clean, integrated finish on trailer and caravan rear panels White LED output — clear, bright reverse light for improved visibility when reversing Low current draw — 0.12A at 13.8V for efficient 12V operation ECE and ADR approved — dual compliance for international and Australian road approval standards as a reverse lamp IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 235W12E Lamp Type Reverse Strip LED Colour White Voltage 12V Dimensions 237mm x 25mm x 3mm Current Draw 0.12A @ 13.8V Mounting Recessed flush Protection Rating IP67 Compliance ECE / ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring flush-mount reverse strip lamps 12V trailer and vehicle electrical systems LED Autolamps 235A12 indicator strip lamp (same 237mm form factor) LED Autolamps 235ASEQ-2 sequential indicator strip (same 237mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 235W12E approved for road use in Australia? Yes. The 235W12E carries both ECE and ADR approval, meeting international and Australian road approval standards for legal on-road use as a reverse lamp. How does the 235W12E fit with other 235 series strip lamps? The 235W12E is the reverse strip in the 235 series, sharing the same 237mm x 25mm x 3mm ultra-slim form factor as the 235A12 indicator strip and 235ASEQ-2 sequential indicator — all suited to matching flush-recessed rear lighting builds. What is the current draw on the 235W12E? The 235W12E draws just 0.12A at 13.8V — very efficient for a reverse lamp and well suited to battery-sensitive 12V caravan and trailer electrical systems. What is the IP rating on the 235W12E? The 235W12E is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 235W12E carry? The 235W12E is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 9–32V Indicator Lamp with Grommet and Plug Low-Profile Recessed Mount, IP67 Product Overview The LED Autolamps 134AMG is a 9–32V LED indicator lamp with grommet and plug, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 133mm x 160mm x 12mm, it's the grommet-equipped counterpart to the 134AMB supplied in a blister pack with everything needed for a complete, sealed recessed installation. Its wide 9–32V operating range extends beyond standard 12/24V lamps, making it compatible with a broader range of vehicle and equipment electrical systems. ECE approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Grommet and plug included — complete sealed installation kit for a weatherproof recessed fit straight out of the blister pack Wide voltage range 9–32V — compatible with 12V, 24V, and other electrical systems up to 32V Low-profile recessed mount — 12mm depth sits flush with the panel for a clean, integrated finish ECE approved — meets international road approval standards for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 134AMG Lamp Type Indicator Voltage Range 9V – 32V Dimensions 133mm x 160mm x 12mm Included Accessories Grommet, plug Mounting Low-profile recessed Protection Rating IP67 Compliance ECE Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed indicator lamps with grommet and wider voltage compatibility 12V, 24V, and up to 32V vehicle and equipment electrical systems Trailer builds requiring ECE-approved indicator lighting LED Autolamps 134AMB indicator lamp (same series, without grommet) LED Autolamps 133AMG indicator lamp with grommet (12/24V equivalent) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 134AMG approved for road use in Australia? Yes. The 134AMG is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as an indicator lamp. What is the difference between the 134AMG and the 134AMB? The 134AMG includes a grommet and plug for a complete, sealed recessed installation, while the 134AMB is available in bulk pack without these accessories. Both are ECE-approved 9–32V indicator lamps in the same form factor. How does the 134AMG differ from the 133AMG? The 134AMG operates across 9–32V versus the 133AMG's 12/24V range, making it more versatile for electrical systems that fall outside standard voltage bands. Both share the same 133mm x 160mm x 12mm form factor. What is the IP rating on the 134AMG? The 134AMG is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 134AMG carry? The 134AMG is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Stop/Tail Lamp with Clear Lens and Chrome Reflector IP67, 5-Year Warranty Product Overview The LED Autolamps 131CRM is a 12/24V stop/tail lamp with a clear lens and internal chrome reflector, sharing the same 134mm x 87mm x 12mm form factor as the 131AM indicator and 131CAM clear indicator lamps. The clear lens presents a clean, colourless appearance when inactive with red stop/tail output activating when the lamp is energised while the chrome reflector maximises LED brightness for strong on-road visibility. ADR road approved, IP67 rated, and mountable in horizontal or vertical orientation. Backed by a 5-year warranty. Features & Benefits Clear lens — clean, modern appearance when inactive; red stop/tail output activates when the lamp is energised Internal chrome reflector — amplifies LED output for stronger, more consistent red stop/tail brightness across the lamp face Horizontal and vertical mount — flexible orientation suits a wide range of panel layouts on trailers and truck bodies ADR road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 131CRM Lamp Type Stop / Tail Lens Colour Clear Reflector Internal chrome Voltage Range 12V / 24V Dimensions 134mm x 87mm x 12mm Mounting Horizontal or vertical surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring surface mount stop/tail lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail lighting with a clear lens finish LED Autolamps 131CAM clear lens indicator lamp (same form factor, matching clear lens) LED Autolamps 131AM amber lens indicator lamp (same form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 131CRM approved for road use in Australia? Yes. The LED Autolamps 131CRM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. What does the clear lens look like when inactive? When not energised, the lens appears clear and colourless. The red stop/tail output is produced by the LEDs and only becomes visible when the lamp is activated. How does the 131CRM fit with other 131 series lamps? The 131CRM shares the same 134mm x 87mm x 12mm form factor as the 131AM and 131CAM indicator lamps, making it a natural match for a uniform rear lighting set across stop/tail and indicator functions. What is the IP rating on the 131CRM? The 131CRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 131CRM carry? The 131CRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Round Stop/Tail Lamp with Red Lens Low-Profile Recessed Mount Product Overview The LED Autolamps 102R is a 12V round stop/tail lamp with a red lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. The flush recessed fit delivers a clean, integrated appearance on trailer and truck body panels, keeping the lamp protected and sitting neatly within the panel surface. ADR road approved and rated IP67, the 102R is a reliable, road-legal stop/tail solution for 12V trailer and vehicle electrical systems. Features & Benefits Red lens — delivers correct red stop/tail output with a consistently coloured lens appearance whether active or inactive Low-profile recessed mount — sits flush with the mounting panel for a clean, integrated finish on trailer and truck bodies ADR road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed specifically for 12V trailer and vehicle electrical systems Technical Specs Specification Detail SKU 102R Lamp Type Stop / Tail Lens Colour Red Voltage 12V Mounting Low-profile recessed Protection Rating IP67 Compliance ADR Warranty 1 year Weight 0.4 kg Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed stop/tail lamps 12V trailer and vehicle electrical systems Trailer builds requiring ADR-approved stop/tail lighting LED Autolamps 102A and 102AM indicator lamps (same 102 series round form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102R approved for road use in Australia? Yes. The LED Autolamps 102R is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. What mounting style does the 102R use? The 102R is designed for low-profile recessed mounting, sitting flush with the panel surface for a clean, integrated finish on trailer and truck bodies. What is the IP rating on the 102R? The 102R is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Is the 102R compatible with 24V systems? No. The 102R is a 12V-only lamp and is not rated for 24V applications. For a multi-voltage equivalent, check the LED Autolamps multi-volt round lamp range. What warranty does the 102R carry? The 102R is backed by a 1-year warranty from LED Autolamps. Weight 0.4 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Round Indicator Lamp with Clear Lens Low-Profile Recessed Mount Product Overview The LED Autolamps 102ACM is a 12/24V round indicator lamp with a clear lens, built for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 130mm in diameter at just 12mm deep, it delivers a flush, integrated finish across a wide range of trailer and vehicle body styles. Surface bases are available for installations requiring surface mounting rather than a recessed fit, giving auto electricians and trailer builders additional flexibility. ADR Australian road approved, IP67 rated, and backed by a 5-year warranty, the 102ACM is the multi-voltage counterpart to the 12V-only 102AC. Features & Benefits Clear lens — presents a clean, colourless appearance when inactive; amber indicator colour activates when the lamp is energised Low-profile recessed mount — 12mm depth sits flush with the mounting panel for a clean, integrated finish Surface bases available — for installations requiring surface mounting rather than recessed fitting; contact F.A.E. for compatible surface base options ADR Australian road approved — meets Australian Design Rules for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 102ACM Lamp Type Indicator Lens Colour Clear Voltage Range 12V / 24V Diameter 130mm Depth 12mm Mounting Low-profile recessed (surface base available) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed indicator lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved indicator lighting with a clear lens finish Compatible surface mount bases (available separately — confirm with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102ACM approved for road use in Australia? Yes. The LED Autolamps 102ACM is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. How does the 102ACM differ from the 102AC? The 102ACM operates on both 12V and 24V systems, while the 102AC is a 12V-only lamp. Both share the same 130mm round clear lens recessed mount form factor. What mounting options are available for the 102ACM? The 102ACM is designed for low-profile recessed mounting. Surface bases are also available for surface mount installations — contact F.A.E. for compatible options. What is the IP rating on the 102ACM? The 102ACM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 102ACM carry? The 102ACM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 100BSTIM Stop Tail and Indicator Lamp 100x100mm with Bracket An ADR road-approved LED stop, tail, and indicator lamp from the LED Autolamps Original Square Series, the 100BSTIM features an IP67 rating, clip-in replaceable lens, surface mount bracket, pre-wired connector, and operates across 12-24V DC, backed by a 5-year warranty. Product Overview The LED Autolamps 100BSTIM is a combined stop, tail, and indicator lamp from the Original Square Series, designed for surface mount installation on trailers, caravans, and commercial vehicles. The unit measures 122 x 122 x 31mm overall with a centre-to-centre mounting distance of 70mm and is housed in a black housing. The clip-in replaceable lens allows lens replacement without full unit replacement if the lens is damaged. The 100BSTIM operates across a 12-24V DC voltage range and draws 0.17A for stop, 0.04A for tail, and 0.18A for indicator functions at 13.8V. IP67-rated for waterproof and dustproof protection, ADR road approved with individual compliance numbers for stop, tail, and indicator functions, and supplied with a bracket in blister packaging. Features & Benefits Original Square Series Design: The 100BSTIM is from LED Autolamps' Original Square Series, featuring the distinctive 100x100mm square lamp profile suited to trailers, caravans, and commercial vehicles. ADR Road Approved: The 100BSTIM holds ADR road approval (CTA060218) with individual compliance numbers for stop (CRN35781), tail (CRN35782), and indicator (CRN35783) functions, confirming it meets Australian Design Rules requirements for on-road use. IP67 Waterproof and Dustproof Rating: The IP67 rating provides full dust ingress protection and waterproof protection against temporary immersion, suited to exposed trailer and caravan mounting locations. Clip-In Replaceable Lens: The clip-in lens design allows the lens to be replaced without replacing the full lamp unit, reducing long-term maintenance costs if the lens is scratched or damaged. Combined Stop, Tail, and Indicator Functions: The 100BSTIM combines stop, tail, and indicator functions in a single compact unit, reducing the number of individual lamp assemblies required and simplifying wiring. 12-24V DC Operating Range: The 100BSTIM operates across 12-24V DC, making it compatible with both 12V passenger vehicle and trailer systems and 24V commercial vehicle and trailer systems. Surface Mount with Bracket Included: The 100BSTIM is supplied with a surface mount bracket for secure installation to trailer, caravan, or vehicle body panels with a 70mm centre-to-centre mounting distance. Pre-Wired Connector: The lamp is supplied pre-wired for straightforward connection to the trailer or vehicle wiring harness without requiring additional connector assembly. 5-Year Warranty: The 100BSTIM is backed by a 5-year LED Autolamps warranty. Technical Specs Specification Detail SKU 100BSTIM Brand LED Autolamps Series Original Square Series Light Style Stop, Tail, and Indicator Light Type LED Housing Colour Black Overall Dimensions 122mm x 122mm x 31mm Mount Centre-to-Centre 70mm Mount Type Surface Mount Input Voltage 12-24V DC Current Draw - Stop 0.17A at 13.8V Current Draw - Tail 0.04A at 13.8V Current Draw - Indicator 0.18A at 13.8V IP Rating IP67 Lens Clip-In Replaceable Connector Pre-Wired ADR Approval CTA060218 Stop Compliance CRN35781 Tail Compliance CRN35782 Indicator Compliance CRN35783 Weight 0.28kg Packaging Blister Warranty 5 Years Compatible With The 100BSTIM is compatible with 12V and 24V DC trailer, caravan, and vehicle electrical systems. ADR road approved for on-road use in Australia. Confirm mounting clearance and wiring requirements for your specific trailer or vehicle before purchase. Frequently Asked Questions Is the 100BSTIM ADR approved for on-road use in Australia? Yes. The 100BSTIM holds ADR approval (CTA060218) with individual compliance numbers for stop (CRN35781), tail (CRN35782), and indicator (CRN35783) functions, confirming it meets Australian Design Rules requirements for on-road use. Can the lens on the 100BSTIM be replaced if damaged? Yes. The 100BSTIM features a clip-in replaceable lens design, allowing the lens to be replaced without replacing the full lamp unit if the lens is scratched or damaged. Is the 100BSTIM suitable for 24V vehicles and trailers? Yes. The 100BSTIM operates across a 12-24V DC voltage range, making it compatible with both 12V and 24V vehicle and trailer electrical systems. What is the mounting centre-to-centre distance of the 100BSTIM? The 100BSTIM has a mounting centre-to-centre distance of 70mm. Confirm this measurement suits your specific mounting panel and bracket location before purchase. Does the 100BSTIM include a mounting bracket? Yes. The 100BSTIM is supplied with a surface mount bracket for installation to trailer, caravan, or vehicle body panels. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Maxilamp Stop/Tail/Indicator/Reflector Black ABS, PMMA Acrylic Lens, IP67, 7-Year Warranty Product Overview The LED Autolamps MAXILAMPC1XCE is the black ABS variant of the Maxilamp series rear combination lamp, with a PMMA acrylic lens and 2-bolt mounting, covering stop, tail, indicator, and integrated reflex reflector functions in a 125mm round x 40mm housing. Same 7-year warranty and ECE road approval as the MAXILAMP1XC. IP67 rated and backed by a 7-year warranty. Features & Benefits 7-year warranty — the longest warranty in the LED Autolamps range PMMA acrylic lens — UV-resistant acrylic for good optical clarity and long-term durability ABS base — lightweight, impact-resistant thermoplastic housing Black housing — clean, professional finish for trailer and truck rear panels 2-bolt mount — secure, fixed installation for high-vibration transport environments Stop, tail, indicator, and reflex reflector — four functions in a single 125mm round unit Inbuilt reflex reflector — integrated passive reflector for additional rear visibility and compliance ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU MAXILAMPC1XCE Lamp Type Stop / Tail / Indicator / Reflector Voltage Range 12V / 24V Dimensions 125mm round x 40mm Lens Material PMMA Acrylic Base Material ABS Housing Colour Black Reflector Inbuilt reflex Mounting 2-bolt surface mount Protection Rating IP67 Compliance ECE Warranty 7 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a premium round rear combination lamp with extended warranty 12V light vehicles and 24V heavy transport applications LED Autolamps MAXILAMP1XC (same Maxilamp series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the MAXILAMPC1XCE approved for road use in Australia? Yes. The MAXILAMPC1XCE is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. How does the MAXILAMPC1XCE differ from the MAXILAMP1XC? The MAXILAMPC1XCE specifies a black ABS base, PMMA acrylic lens, and 2-bolt mounting. Both carry the same ECE approval, IP67 rating, and 7-year warranty in the same 125mm round form factor. What is the advantage of PMMA acrylic over polycarbonate? PMMA acrylic offers good optical clarity and UV resistance for outdoor lamp lenses. Polycarbonate is generally more impact-resistant but can yellow with prolonged UV exposure without UV coating. Acrylic suits applications where clarity over the long term is prioritised. What is the IP rating on the MAXILAMPC1XCE? The MAXILAMPC1XCE is rated IP67 — fully sealed against dust and capable of withstanding water immersion. What warranty does the MAXILAMPC1XCE carry? The MAXILAMPC1XCE is backed by a 7-year warranty from LED Autolamps — the longest offered in the range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 48/00 Approved 12/24V Number Plate Frame Light 375mm, 1m Cable, Ultra-Low Draw Product Overview The LED Autolamps LP1 is a 12/24V LED number plate frame light measuring 375mm x 173mm x 25mm in a black housing, designed to mount directly over the number plate as a combined frame and illumination unit. Only one lamp is required for ADR 48/00 compliance, and the 375mm centre-to-centre mount suits standard Australian number plate widths. Pre-wired with a 1m cable lead and drawing just 0.01A at 13.8V. White LED output, IP67 rated, and backed by a 5-year warranty. Features & Benefits Number plate frame design — mounts as a combined frame and light over the number plate for a clean, integrated installation ADR 48/00 approved — one lamp required for full compliance as a number plate light 375mm centre-to-centre mount — suits standard Australian number plate widths White LED output — bright, clear white illumination of the number plate 1m pre-wired cable — generous cable reach for flexible routing to the vehicle's number plate light circuit Ultra-low current draw — 0.01A at 13.8V IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU LP1 Lamp Type Number Plate Frame Light LED Colour White Housing Colour Black Voltage Range 12V / 24V Dimensions 375mm x 173mm x 25mm Mount Centre-to-Centre 375mm Current Draw 0.01A @ 13.8V Cable Length 1m Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 ADR Note One lamp required for compliance Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and vehicles requiring an ADR-compliant number plate frame light 12V light vehicles and 24V heavy transport applications LED Autolamps 30BLM, 30CLM, 35BLM, 35CLM (smaller discrete plate light alternatives) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many LP1 lamps are required for ADR compliance? Only one lamp is required to meet ADR 48/00 compliance — a single LP1 provides a fully compliant number plate light installation. What makes the LP1 different from a standard number plate light? The LP1 is a combined frame and light unit that mounts over the number plate, providing both a surround frame and integrated illumination in a single fitting — a tidier solution than a small discrete lamp mounted above a bare plate. What is the current draw of the LP1? The LP1 draws just 0.01A at 13.8V — one of the lowest draws of any lamp in the LED Autolamps range, effectively zero impact on the vehicle's electrical system. What is the IP rating on the LP1? The LP1 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and vehicle mounting. What warranty does the LP1 carry? The LP1 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less