AUTOBACS HD7130CK - 7 Inch 2 Camera Caravan Kit Advanced caravan camera kit featuring 7-inch high-resolution monitor, 720p heavy-duty camera, 480p dual mount camera, trailer quick connect system with curly cable, and complete installation hardware for hassle-free caravan and trailer setup. Product Overview The AUTOBACS HD7130CK is an advanced caravan camera kit offering high-resolution rear-view capabilities through a hassle-free system including all necessary components to seamlessly install a dependable camera and monitor setup for caravans and trailers. This comprehensive kit enables confident navigation with clear view of surroundings while reversing, providing peace of mind on the road ahead. The system includes a 7-inch Grade A TFT LCD monitor with 1024 x 600 resolution, Camera 1 heavy-duty 720p camera featuring IMX225LQR-C sensor with 140° diagonal viewing angle and IP69K rating, Camera 2 dual mount 480p camera with 165° ultra-wide viewing angle and 9-32V power compatibility, and trailer quick connect system with curly cable extending from 0.5m to 4.0m. The monitor features touch-sensitive controls, 3 camera inputs with individual triggers, auto PAL/NTSC selection, and 10-32V DC power supporting both 12V and 24V systems. Camera 1 delivers 1280 x 720 effective pixels with 18 infrared LEDs providing 0.001 Lux illumination, integrated microphone, and IP69K waterproof protection. Camera 2 provides 640 x 480 resolution with ultra-wide 165° diagonal coverage, selectable mirror/non-mirror orientation, and compact 16.5mm dimensions. The trailer quick connect system includes 5-pin metal plug with weather cover, metal mounting brackets, 10m monitor-side cable, 15m camera-side cable, and curly interconnect cable. Complete installation hardware includes U-bracket for monitor mounting and glass mount bracket for flexible installation options. Key Features Complete Caravan Camera System - Comprehensive hassle-free kit including 7-inch high-resolution monitor, two cameras with different viewing angles and capabilities, trailer quick connect system, and all necessary cables and mounting hardware for seamless installation, eliminating the need to source individual components or verify compatibility for complete caravan reversing solution. 7-Inch Grade A Monitor - Premium new Grade A TFT LCD panel delivering 1024 x 600 resolution on 7-inch diagonal screen in 16:9 format with less than 500 CD/M2 brightness, touch-sensitive controls, 70° viewing angles in all directions, selectable guidelines on camera 2 input, and 10-32V DC power compatibility supporting both 12V caravans and 24V applications. Camera 1: 720p Heavy-Duty Performance - Professional IMX225LQR-C 1/3" sensor delivering 1280 x 720 effective pixels with 720p resolution, 140° diagonal viewing angle with 120° horizontal coverage, 18 infrared LEDs providing 0.001 Lux illumination, IP69K waterproof protection, integrated microphone for audio monitoring, and robust 98.3mm x 67.7mm x 68mm dimensions including bracket. Camera 2: Ultra-Wide Dual Mount - Compact dual mount camera featuring ultra-wide 165° diagonal viewing angle with 120° horizontal coverage for expansive peripheral visibility, 640 x 480 resolution with 480p performance, selectable mirror/non-mirror orientation for various mounting positions, 9-32V DC power compatibility, IP67 protection, and ultra-compact 16.5mm x 16.5mm x 23mm dimensions. Trailer Quick Connect System - Professional quick disconnect system featuring curly cable extending from 0.5m to 4.0m for vehicle-to-trailer connection, 5-pin male metal plug with weather cover for protection against elements, metal mounting brackets for secure installation, 10m terminated cable from trailer plug to monitor, and 15m terminated cable from camera to trailer plug for comprehensive coverage. Comprehensive Installation Package - Complete mounting and cabling solution including U-bracket for monitor installation, glass mount bracket for windscreen or window mounting, all terminated cables with universal standard 4-pin configuration, and metal plug mounting brackets ensuring professional installation without requiring additional components or specialized tools. Technical Specifications Monitor Specifications TFT Panel: New Grade A LCD LCD Size: 7-Inch (Diagonal) Display Format: 16:9 Resolution: 1024 x 600 Brightness: <500 CD/M2 Viewing Angles: 70° Left/Right/Up/Down Video System: Auto PAL/NTSC Select Video Connect: 3 x 4-Pin (Male) Compatibility: Standard & High Resolution Cameras Connection Type: Universal Standard 4-Pin Configuration (Male) Buttons: Touch Sensitive Camera Triggers: 3 Monitor View: Normal/Mirror/Flip/Mirror-Flip Image Select Guidelines: Selectable On/Off (Camera 2 Input Only) Audio: Camera 3 Input Only Main Menu: Brightness/Contrast/Colour/Photosensitive (Dimmer), Language, Default Setting, Volume, RLUD, (Screen Orientation), VCOM (Exposure), Ruler Setting (Guidelines), AccTime, Version Operating Temperature: -20°C to +70°C Power Input: 10-32V DC (Negative Ground) Dimensions: 176mm (W) x 122mm (H) x 28mm (D) excluding bracket and visor Camera 1: 12V Heavy Duty Camera Image Device: 1/3" IMX225LQR-C Diagonal Viewing Angle: 140° Horizontal Viewing Angle: 120° Signal System: PAL Effective Pixels: 1280 (H) x 720 (V) Resolution: 720p Orientation: Mirror Image Night Vision: 18 Infrared LEDs Illumination: 0.001 Lux with IR on Ingress Protection: IP69K Integrated Microphone: Yes Operating Temperature: -20°C to 70°C Power Consumption: 3W, 250mA Dimensions: 98.3mm (W) x 67.7mm (H) x 68mm (D) including bracket Connection Type: Universal Standard 4-Pin Female Power Supply: 12V DC Camera 2: 12/24V Dual Mount Camera Image Device: 1/3" CMOS Diagonal Viewing Angle: 165° Horizontal Viewing Angle: 120° Signal System: PAL Effective Pixels: 640 x 480 Resolution: 480p Orientation: Selectable Mirror/Non Mirror Night Vision: 0.2 Lux Illumination: 0.001 Lux with IR on Ingress Protection: IP67 Integrated Microphone: No Operating Temperature: -20°C to 70°C Power Consumption: 90-300mA Dimensions: 16.5mm (W) x 16.5mm (H) x 23mm (D) excluding bracket Connection Type: Mini 4 Pin Terminated RCA (Male) Lead: 6m Power Supply: 9-32V DC Trailer Quick Connect Curly Cable Length: 0.5m (Original State), 4.0m (Elongated) Mounting Plate: 5-Pin (Male) Metal Plug with Weather Cover Brackets: 2 x Metal Plug Mounting Brackets Cable (Monitor Side): 10m Terminated to 4-Pin (Trailer Plug to Monitor) Cable (Camera Side): 15m Terminated to 4-Pin (Camera to Trailer Plug) Included Accessories U-Bracket Glass Mount Bracket Frequently Asked Questions Why does this kit include two different cameras? Camera 1 is a premium 720p heavy-duty camera with IP69K rating, 18 infrared LEDs, and integrated microphone, ideal for primary rear-view mounting on caravans requiring maximum image quality and weatherproofing. Camera 2 is an ultra-compact 480p camera with ultra-wide 165° viewing angle and 9-32V compatibility, perfect for side-view or secondary mounting positions where space is limited and broader peripheral coverage is required. How does the trailer quick connect system work? The quick connect system uses a 5-pin metal plug with weather cover that mounts on your vehicle's tow bar area. The curly cable connects vehicle to trailer, extending from 0.5m to 4.0m when towing. Simply disconnect the plug when unhitching your caravan, eliminating permanent cable routing. The 10m monitor-side cable connects plug to cab, while the 15m camera-side cable connects cameras to plug. Can Camera 2 be used on both 12V and 24V systems? Yes, Camera 2 features 9-32V DC power supply compatibility, supporting both 12V caravan electrical systems and 24V commercial vehicle applications. This flexibility enables use across various towing vehicles without requiring voltage-specific camera variants, while the monitor's 10-32V compatibility ensures the entire system works across different voltage platforms. What is the advantage of the selectable mirror/non-mirror orientation on Camera 2? Selectable mirror/non-mirror orientation on Camera 2 allows correct image orientation regardless of camera mounting position. Mount the camera on either side of your caravan or in various positions, then select the appropriate orientation setting to ensure the displayed image appears correctly oriented rather than reversed, providing natural left-right directional reference for the driver. Why does Camera 1 have IP69K while Camera 2 has IP67 protection? Camera 1's IP69K rating provides maximum protection against high-pressure washing and steam cleaning, ideal for rear-mounting positions that experience direct water spray from road conditions and caravan washing. Camera 2's IP67 rating protects against dust and water immersion, suitable for side-mounting positions with less exposure to direct high-pressure water while maintaining weather resistance for Australian conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AUTOBACS HD73WP - 7 Inch High Res Waterproof Monitor High-resolution 7-inch waterproof monitor featuring 1024 x 600 resolution, Grade A TFT LCD panel, IP66 waterproof rating, 3 camera inputs with automatic switching, 10-32V DC power compatibility, and touch-sensitive controls for machinery, industrial applications, and trucking. Product Overview The AUTOBACS HD73WP is a 7-inch monitor suitable for use in machinery, industrial applications, and trucking environments. Designed to be water and dust proof with IP66 rating, this professional-grade monitor operates with both 12V and 24V systems for versatile installation across various vehicle platforms. The monitor is equipped with automatic camera switching feature allowing up to three cameras to automatically switch when reversing, enhancing safety by ensuring complete view of surroundings. This high-resolution display features new Grade A TFT LCD panel with 178mm diagonal 7-inch screen delivering 1024 x 600 resolution in 16:9 format with 700:1 contrast ratio. The 85° viewing angles in all directions ensure clear visibility from various operator positions. The monitor supports AHD/PAL/NTSC/AUTO video systems and connects through 3 x 4-pin male universal standard configuration for compatibility with standard and high-resolution cameras. Touch-sensitive button controls provide intuitive operation without mechanical button wear. Advanced features include 3 camera triggers for automatic switching, selectable normal/mirror/flip/mirror-flip image orientation, and built-in 1W audio output. Operating across -20°C to +70°C temperature range with 90% relative humidity tolerance and -30°C to +80°C storage temperature with 90% humidity, the monitor operates on 10-32V DC power input supporting both 12V and 24V systems through negative ground configuration with approximately 10W power consumption. The monitor measures 197mm width x 132mm height x 34mm depth not including bracket, or 228mm width x 154mm height x 34mm depth including bracket. Complete package includes monitor sunshade for glare reduction, U-bracket for mounting, stand mount option, power and trigger cables, 4 thumb screws, and 4 nylon washers for professional installation. Key Features IP66 Waterproof Protection - Professional IP66 ingress protection rating providing water and dust proof construction suitable for demanding machinery, industrial applications, and trucking environments, ensuring reliable performance when exposed to rain, dust, high-pressure washing, and harsh operating conditions typical in construction, mining, agricultural, and commercial vehicle applications. High-Resolution Grade A Display - Premium new Grade A TFT LCD panel delivering 1024 x 600 resolution on 178mm diagonal 7-inch screen in 16:9 format with 700:1 contrast ratio, providing crystal-clear visuals with enhanced safety and visibility through 85° viewing angles in all directions for clear monitoring from various operator positions in machinery cabs and truck cabins. 3 Camera Automatic Switching - Versatile 3 camera input capability with automatic switching feature triggered by reversing operation, enabling comprehensive vehicle monitoring coverage including rear reversing camera, side blind spot camera, and front approach camera connections, providing complete perimeter visibility with automatic camera selection based on operational requirements for enhanced safety. 12V/24V Power Compatibility - Universal 10-32V DC power input supporting both 12V systems common in light commercial vehicles and machinery, and 24V systems typical in trucks and heavy industrial equipment, consuming approximately 10W power through negative ground configuration, eliminating the need for voltage converters or specific monitor variants across diverse vehicle fleets. Touch-Sensitive Controls - Intuitive touch-sensitive button interface providing easy operation without mechanical button wear typical of traditional push-button designs, delivering responsive control access to monitor settings including selectable normal/mirror/flip/mirror-flip image orientation for various camera mounting positions and video system selection across AHD/PAL/NTSC/AUTO formats. Complete Installation Package - Comprehensive mounting and connectivity solution including monitor sunshade for glare reduction in bright conditions, U-bracket for versatile mounting options, stand mount for alternative installation configurations, power and trigger cables for electrical connections, 4 thumb screws and 4 nylon washers for secure professional installation without requiring additional hardware components. Technical Specifications Display TFT Panel: New Grade A LCD LCD Size: 178mm (7-Inch) Diagonal Display Format: 16:9 Resolution: 1024 x 600 Contrast: 700:1 Viewing Angles: 85° Left/Right/Up/Down Video System Video System: AHD/PAL/NTSC/AUTO Video Connect: 3 x 4-Pin (Male) Compatibility: Standard and High Resolution Cameras Connection Type: Universal Standard 4-Pin Configuration (Male) Camera Triggers: 3 Display Options Monitor View: Normal/Mirror/Flip/Mirror-Flip Image Select Controls & Audio Buttons: Touch Sensitive Audio Output: Built-in 1W Construction & Protection Waterproof Rating: IP66 Environmental Specifications Operating Temperature: -20°C to +70°C, RH90% Storage Temperature: -30°C to +80°C, RH90% Electrical Specifications Power Input: 10-32V DC (Negative Ground) Power Consumption: ~10W Physical Specifications Dimensions (Not Including Bracket): 197mm (W) x 132mm (H) x 34mm (D) Dimensions (Including Bracket): 228mm (W) x 154mm (H) x 34mm (D) Included Accessories Monitor Sunshade U-Bracket Stand Mount Power & Trigger Cables Thumb Screws: 4 Nylon Washers: 4 Frequently Asked Questions What does IP66 waterproof rating mean for harsh environments? IP66 rating provides complete protection against dust ingress and powerful water jets from any direction, making the HD73WP suitable for machinery, industrial applications, and trucking where monitors face rain, high-pressure washing, dust storms, and harsh operating conditions. While not submersible like IP68, IP66 handles typical automotive and industrial water exposure including heavy rain and wash-down operations. How does automatic camera switching enhance safety? The HD73WP's automatic camera switching feature activates specific cameras based on operation triggers - typically switching to rear camera when reversing gear is engaged, enabling hands-free monitoring without manual camera selection. This ensures operators always have appropriate views during reversing operations without distraction, with 3 camera triggers accommodating rear, side, and front camera configurations for complete perimeter visibility. Can I connect both AHD and analog cameras simultaneously? Yes, the HD73WP supports AHD/PAL/NTSC/AUTO video systems, enabling connection of modern AHD high-resolution cameras alongside traditional analog PAL/NTSC cameras. The monitor automatically detects video format from each camera input, allowing mixed camera types across the 3 inputs based on budget, availability, or specific application requirements without requiring format-specific monitors. Why is 10-32V compatibility important for industrial applications? Industrial machinery and commercial vehicles use various electrical system voltages - light equipment typically operates on 12V while heavy trucks and industrial machinery use 24V systems. The HD73WP's 10-32V DC compatibility eliminates voltage-specific monitor variants, simplifying inventory management and enabling use across diverse equipment fleets without voltage converters or compatibility concerns. What are the touch-sensitive controls used for? Touch-sensitive controls provide access to monitor settings including image orientation selection (normal/mirror/flip/mirror-flip) for proper display regardless of camera mounting position, video system format selection, and other configuration options. The touch-sensitive design eliminates mechanical button wear from frequent use in demanding industrial and commercial vehicle environments where traditional buttons would deteriorate.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AUTOBACS HD74WK - 7 Inch High Res Wireless System Complete 7-inch high-resolution wireless reversing system featuring 1024 x 600 monitor with quad-view functionality supporting up to 4 cameras, Starlight HD 1920 x 1080 wireless camera with audio capabilities, IP69K rating, 2.4GHz transmission, and 10-32V DC power compatibility. Product Overview The AUTOBACS HD74WK 7-inch high-resolution wireless reversing system enhances driving safety through complete wireless solution featuring top-of-the-line camera with audio capabilities, providing crystal-clear visuals even in low light conditions. With quad view functionality, the system allows pairing up to 4 wireless cameras enabling monitoring of multiple angles for complete visibility of vehicle surroundings. The system includes professional 7-inch monitor with 1024 x 600 resolution, 800:1 contrast, 500cd/m2 brightness, and 85° viewing angles in all directions. The monitor supports NTSC and PAL video decoding with 2.412-2.4835 GHz wireless operating frequency, maximum 180ms time delay, single/split screen/quad viewing options, and selectable on/off reversing guidelines. The included Starlight HD camera features 1/2.9-inch image sensor delivering 1920 x 1080 active pixel array with 1000 TV lines resolution, 120° diagonal viewing angle with 103° horizontal coverage, IP69K waterproof rating, 0.1 Lux minimum illumination capability, and 2.412-2.4835GHz wireless transmission with 20dBm transmitter power. Both monitor and camera operate on 10-32V DC power supply supporting 12V and 24V systems, with monitor consuming less than 400mA at 12V and camera less than 300mA at 12V. Operating across -20°C to +70°C temperature range with -30°C to +80°C storage temperature tolerance, the monitor measures 179mm x 122mm x 28mm excluding mount and sunvisor or 197mm x 137mm x 63mm including mount and sunvisor, while camera measures 79mm x 49mm x 54mm excluding mount. Complete system includes monitor, camera, sunshade for glare reduction, U-bracket for mounting, wiring harness, camera DC power cable, and antennas for wireless transmission. Key Features Complete Wireless Reversing System - Comprehensive wireless solution eliminating complex cable routing required by traditional wired installations, featuring 2.4GHz wireless transmission between camera and monitor with maximum 180ms time delay, supporting up to 4 wireless cameras for complete perimeter monitoring without permanent cable installation through vehicle structure for simplified installation and maintenance. Quad View Multi-Camera Support - Advanced quad view functionality supporting up to 4 wireless cameras with selectable viewing options including single camera view, split screen dual view, or quad view displaying all cameras simultaneously, enabling comprehensive monitoring of rear, side, and front approaches with flexible display configuration based on operational requirements for enhanced safety awareness. Starlight HD Camera Performance - Premium 1/2.9-inch Starlight HD image sensor delivering 1920 x 1080 active pixel array with 1000 TV lines resolution and 0.1 Lux minimum illumination capability, providing crystal-clear visuals even in low light conditions with 120° diagonal viewing angle, audio capabilities, IP69K waterproof protection, and wireless transmission for demanding commercial and recreational vehicle applications. IP69K Heavy-Duty Camera Protection - Industry-leading IP69K waterproof rating on camera providing maximum protection against high-pressure water jets, steam cleaning operations, dust ingress, and complete water submersion, delivering reliable performance throughout the harshest weather conditions and most demanding cleaning procedures for commercial vehicles, trucks, caravans, and construction equipment. 12V/24V System Compatibility - Universal 10-32V DC power supply compatibility across both monitor and camera supporting 12V systems common in cars, caravans, and light commercial vehicles, and 24V systems typical in trucks and heavy equipment, with monitor consuming less than 400mA at 12V and camera less than 300mA at 12V for efficient operation across various vehicle electrical platforms. High-Resolution Monitor Display - Professional 7-inch monitor featuring 1024 x 600 resolution with 800:1 contrast ratio and 500cd/m2 brightness, delivering clear image quality with 85° viewing angles in all directions, NTSC and PAL video decoding, selectable reversing guidelines, and comprehensive viewing options including single, split screen, and quad display configurations for optimal monitoring flexibility. Technical Specifications Monitor Specifications Video Decoding: NTSC and PAL Cameras Supported: Up to 4 cameras Resolution: 1024 x 600 Contrast: 800:1 Brightness: 500cd/m2 Viewing Angle: 85° Left/Right/Up/Down Viewing Options: Single/Split Screen/Quad Reversing Guidelines: Selectable On/Off Operating Frequency: 2.412-2.4835 GHz Time Delay: 180ms max Operating Voltage: 10-32V DC Current Consumption: <400mA at 12V Operating Temperature: -20°C to +70°C Storage Temperature: -30°C to +80°C Dimensions (Excluding Mount & Sunvisor): 179mm x 122mm x 28mm Dimensions (Including Mount & Sunvisor): 197mm x 137mm x 63mm Camera Specifications Image Sensor: 1/2.9 inch Starlight HD Active Pixel Array: 1920 x 1080 Viewing Angle: 120° Diagonal, 103° Horizontal Resolution: 1000 TV lines IP Rating: IP69K Minimum Illumination: 0.1 Lux Operating Frequency: 2.412-2.4835GHz Transmitter Power: 20dBm Operating Voltage: 10-32V DC Current Consumption: <300mA at 12V Operating Temperature: -20°C to +70°C Storage Temperature: -30°C to +80°C Dimensions (Excluding Mount): 79mm x 49mm x 54mm Included Components Monitor Camera Sunshade U-Bracket Wiring Harness Camera DC Power Cable Antennas Frequently Asked Questions How does wireless transmission compare to wired camera systems? The HD74WK's 2.4GHz wireless transmission with maximum 180ms time delay provides reliable signal transmission without complex cable routing through vehicle structure, eliminating cable damage from trailer articulation and simplifying installation. The system supports up to 4 wireless cameras, making it ideal for caravans, trucks, and applications where running cables would be difficult or impossible, while maintaining clear image quality with minimal latency. Can I add additional cameras to the system later? Yes, the HD74WK monitor supports up to 4 wireless cameras operating on 2.412-2.4835GHz frequency. You can start with the included camera and add compatible FHD74W wireless cameras later as needed, enabling gradual system expansion for comprehensive perimeter monitoring including rear, side, and front camera positions without requiring additional monitors or system replacement. What does Starlight HD sensor mean for low-light performance? The Starlight HD 1/2.9-inch sensor with 0.1 Lux minimum illumination delivers crystal-clear visuals even in low light conditions, capturing usable images during dawn, dusk, night-time operations, underground parking, or covered loading areas where standard cameras produce grainy unclear images. This advanced sensor technology ensures safe reversing operations regardless of ambient lighting conditions. How does the quad view functionality work? Quad view displays all 4 connected wireless cameras simultaneously on the 7-inch screen in split quadrant layout, enabling operators to monitor rear, both sides, and front approaches simultaneously without switching between individual camera views. Alternative viewing options include single camera full-screen view or split screen dual view, selectable based on operational requirements and monitoring preferences. Is the wireless signal affected by vehicle metal structures? The 2.4GHz wireless transmission with 20dBm transmitter power provides strong signal penetration through typical automotive installation environments. The included antennas ensure reliable signal transmission between cameras and monitor across normal vehicle mounting distances. Proper antenna positioning and avoiding extreme metal shielding between camera and monitor locations ensures optimal wireless performance with maximum 180ms latency suitable for reversing operations.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AUTOBACS HDVR74W - 7 Inch High Res DVR Wireless System Complete wireless reversing system with DVR recording featuring 7-inch 1024 x 600 display, quad-view functionality supporting up to 4 wireless cameras, 1920 x 1080 camera with audio and 4 IR LEDs, IP69K rating, 128GB SD card support, and H.264 MP4 recording capability. Product Overview The AUTOBACS HDVR74W is a complete wireless reversing system enhancing driving safety through high-resolution 7-inch display, top-of-the-line camera with audio capabilities, and quad view functionality accommodating up to 4 cameras. This comprehensive system provides complete visibility of vehicle surroundings, making it easier to maneuver and park safely. The system is equipped with DVR recording functionality allowing drivers to record video footage of their entire journey, providing complete record of any incidents or accidents that may have occurred. The monitor features LCD TFT panel with 178mm diagonal 7-inch screen delivering 1024 x 600 resolution in 16:9 format with 700:1 contrast and 600cd/m2 brightness. Advanced features include 85° viewing angles in all directions, single/dual/quad selectable split screen display, normal/mirror/flip/mirror-flip image selection, automatic or manual screen dimmer adjustment, and adjustable guidelines with size and position control. DVR recording captures monitor displayed vision to Micro SD card up to 128GB maximum (not included) in H.264 MP4 decompression format. Operating on 2400-2483.5MHz frequency with -78dBm receiving sensitivity and 200ms time delay, the monitor includes built-in 1.5W audio output and super capacitor backup. The included camera features 1/2.9-inch CMOS sensor with 1920 x 1080 effective pixels, 130° diagonal viewing angle, 38dB signal-to-noise ratio, 81dB dynamic range, IP69K ingress protection, 0 Lux minimum illumination with 4 IR LEDs, integrated microphone, 2403MHz-2478MHz operating frequency with FHSS modulation, 20dBm transmitter power, 12Mbps bit rate, and 120 metres line-of-sight range. Both monitor and camera operate on 10-32V DC power through negative ground configuration with monitor consuming 10W maximum and camera 4W maximum. Complete system includes monitor, sunshade, U-bracket with thumb screw set, stand mount, camera, camera mount and sunshade, wiring harness, power cable, 2 antennas, patch antenna, and 2 hex keys. Key Features DVR Recording Capability - Advanced DVR recording functionality capturing monitor displayed vision to Micro SD card up to 128GB maximum capacity in H.264 MP4 format, providing complete record of entire journey including all camera views displayed on monitor for incident documentation, accident evidence, insurance claims, fleet management, or training purposes with continuous loop recording. Complete Wireless System - Comprehensive wireless solution featuring 2400-2483.5MHz monitor frequency with -78dBm receiving sensitivity and camera operating on 2403MHz-2478MHz with FHSS modulation, 20dBm transmitter power, and 120 metres line-of-sight range, eliminating complex cable routing while supporting up to 4 wireless cameras with 200ms time delay for reliable real-time monitoring. Quad View Multi-Camera Support - Advanced quad view functionality supporting up to 4 wireless cameras with selectable single, dual, or quad split screen display configurations, adjustable guidelines with size and position control, and normal/mirror/flip/mirror-flip image selection enabling comprehensive perimeter monitoring displaying rear, side, and front approaches simultaneously or individually based on operational requirements. High-Resolution Camera Performance - Premium 1/2.9-inch CMOS sensor delivering 1920 x 1080 effective pixels with 130° diagonal viewing angle, 38dB signal-to-noise ratio, 81dB dynamic range, 12Mbps bit rate, 0 Lux minimum illumination with 4 IR LEDs for night vision, IP69K waterproof protection, integrated microphone for audio recording, and 4W maximum power consumption for demanding applications. Professional Monitor Display - High-resolution 7-inch LCD TFT panel featuring 1024 x 600 resolution in 16:9 format with 700:1 contrast ratio and 600cd/m2 brightness, 85° viewing angles in all directions, automatic or manual screen dimmer adjustment for day/night operation, built-in 1.5W audio output, super capacitor backup, and 10W maximum power consumption. 12V/24V System Compatibility - Universal 10-32V DC power supply compatibility through negative ground configuration across both monitor and camera supporting 12V systems in cars, caravans, and light commercial vehicles, and 24V systems in trucks and heavy equipment, operating across -20°C to +70°C temperature range with high humidity tolerance. Technical Specifications Monitor Specifications TFT Panel: LCD LCD Size: 178mm (7-Inch) Diagonal Display Format: 16:9 Resolution: 1024 x 600 Contrast: 700:1 Brightness: 600cd/m2 Video Connect: Up to 4 Wireless Cameras Viewing Angles: 85° Left/Right/Up/Down Split Screen: Single/Dual/Quad Selectable Display Monitor View: Normal/Mirror/Flip/Mirror-Flip Image Select Screen Dimmer: Automatic or Manual Adjustment Guidelines: Adjustable Size & Position DVR Recording: Monitor Displayed Vision Recording Media: Micro SD Card: 128GB Max (Not Included) Operating Frequency: 2400-2483.5MHz Receiving Sensitivity: -78dBm Decompression Format: H.264 (MP4) Time Delay: 200ms Audio Output: Built-in 1.5W Operating Voltage: 10-32V DC (Negative Ground) Backup: Super Capacitor Power Consumption: 10W Max Operating Temperature: -20°C to +70°C, RH90% Storage Temperature: -30°C to +80°C, RH90% Dimensions (Monitor Only): 183mm (W) x 131mm (H) x 30mm (D) Camera Specifications Image Sensor: 1/2.9 inch CMOS Effective Pixels: 1920 x 1080 Viewing Angle: 130° Diagonal S/N Ratio: 38dB Dynamic Range: 81dB Transmitter Power: 20dBm Bit Rate: 12Mbps Ingress Protection: IP69K Minimum Illumination: 0 Lux (4 IR LEDs) Operating Frequency: 2403MHz-2478MHz Modulation: FHSS Line of Sight Range: 120 metres Microphone: Yes Operating Temperature: -20°C to +70°C, RH95% Storage Temperature: -30°C to +80°C, RH95% Operating Voltage: 10-32V DC (Negative Ground) Power Consumption: 4W Max Dimensions (Camera Only): 80mm (W) x 49mm (H) x 67mm (D) Included Components Monitor Sunshade U-Bracket & Thumb Screw Set Stand Mount Camera Camera Mount & Sunshade Wiring Harness Power Cable Antenna x2 Patch Antenna Hex Key x2 Frequently Asked Questions How does DVR recording work with wireless cameras? The HDVR74W records monitor displayed vision to Micro SD card (up to 128GB, not included) in H.264 MP4 format, capturing whatever appears on screen including single camera view, dual split screen, or quad view display. Recording continues in loop mode, overwriting oldest footage when card is full. This provides journey documentation including all camera angles for incident evidence, insurance claims, or fleet management purposes. What is the actual wireless range in real-world conditions? The camera's 120 metres line-of-sight range is the maximum distance in open conditions without obstructions. Real-world range depends on vehicle structure, metal interference, and mounting positions. Typical effective range of 20-40 metres covers most vehicle applications including trucks with trailers, caravans, or motorhomes. The FHSS modulation and 20dBm transmitter power ensure reliable signal penetration through typical automotive installations. Can I view and record all 4 cameras simultaneously? Yes, the quad view display shows all 4 wireless cameras simultaneously in split quadrant layout, and DVR recording captures the entire screen including all displayed camera views. This enables comprehensive journey recording showing complete vehicle perimeter. Alternatively, single or dual camera views can be displayed and recorded based on preference or operational requirements. How does 0 Lux with 4 IR LEDs perform in complete darkness? The camera's 0 Lux minimum illumination with 4 infrared LEDs provides clear visibility in complete darkness. The IR LEDs emit invisible infrared light that the CMOS sensor detects, delivering usable images during night-time operations, underground parking, or unlit loading areas where no ambient lighting exists. The 81dB dynamic range and 38dB signal-to-noise ratio ensure clear image quality in challenging lighting conditions. What Micro SD card is recommended for DVR recording? Use Class 10 or UHS-I rated Micro SD cards up to 128GB maximum capacity for reliable DVR recording. Higher-speed cards ensure smooth H.264 MP4 recording without dropped frames. A 64GB card typically stores 8-12 hours of footage before loop recording overwrites oldest files. Format the card in the monitor before first use for optimal compatibility and performance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Professional-grade reversing vision for heavy-duty applications The Autobacs HD5120K delivers crystal-clear reversing vision through its 5-inch high-resolution display and included 1080p camera system. Engineered for trucks, machinery, and commercial vehicles, this heavy-duty monitor kit operates reliably across 12V and 24V systems. The kit supports dual camera inputs, allowing operators to monitor multiple angles simultaneously for enhanced safety and productivity. Built with Grade A LCD technology and 1024 x 600 resolution, the monitor provides sharp image quality in all lighting conditions. The included HD camera features 120° diagonal viewing angle with infrared night vision capability, ensuring clear vision during night operations or in poorly lit areas. Key Specifications Monitor: 5-inch Grade A LCD display with 1024 x 600 resolution Camera: 1080p resolution with 1/2.9" sensor and 120° viewing angle Power compatibility: 10-32V DC input supports both 12V and 24V systems Dual camera inputs with universal 4-pin configuration IP68 waterproof rating for camera unit Operating temperature range: -20°C to +70°C Night vision: 4 infrared LEDs with 0.01 Lux sensitivity Audio capability: Integrated speaker and microphone Complete kit includes 15m extension cable Features & Benefits Heavy-duty construction - Built for demanding commercial and industrial environments including trucks, excavators, and agricultural machinery Dual camera capability - Connect up to two cameras for comprehensive coverage of blind spots and multiple vehicle zones Universal voltage compatibility - Works seamlessly with both 12V passenger vehicles and 24V commercial trucks and machinery Professional night vision - Four infrared LEDs provide clear visibility during night operations and in underground or covered work areas Weatherproof design - IP68-rated camera withstands pressure washing, dust storms, and extreme Australian conditions Flexible image control - Normal/mirror/flip options accommodate various mounting configurations and operator preferences Touch-sensitive operation - Intuitive controls allow quick adjustments while wearing work gloves Technical Specs Monitor dimensions: 132.2mm W × 94.3mm H × 22.45mm D (excluding bracket and visor) Camera dimensions: 77.2mm W × 48.2mm H × 65.2mm D (excluding bracket) Display brightness: <500 CD/M² Viewing angles: 70° in all directions Video system: Auto PAL/NTSC selection Camera power consumption: <3W Maximum current draw: <250mA Connection type: Universal 4-pin male/female configuration Cable length: 15m heavy-duty extension included Frequently Asked Questions **Will this work with my 24V truck? ** Yes, the HD5120K accepts 10-32V DC input, making it compatible with both 12V and 24V electrical systems commonly found in commercial vehicles. **How many cameras can I connect? ** The monitor supports up to 2 cameras simultaneously with independent switching and delay controls for each input. **Is the camera waterproof enough for truck washing? ** The camera has IP68 ingress protection rating, making it fully sealed against high-pressure washing and submersion. **Does it work in complete darkness? ** Yes, the camera includes 4 infrared LEDs providing clear night vision down to 0.01 Lux illumination levels. **What's included in the complete kit? ** Monitor with bracket and sun visor, HD camera, power/trigger harness, 15m extension cable, and all mounting hardware. Compatible With Heavy-duty trucks (Kenworth, Mack, Volvo, Isuzu) Construction machinery (excavators, loaders, graders) Agricultural equipment (tractors, harvesters, spray rigs) Caravans and motorhomes requiring 12V operation Mining vehicles and equipment Bus and coach applications Additional HD series cameras for expanded coverage Camera extension cables for longer runs Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Echomaster FCTP-DR1304 Blind Spot Integration Camera System - RAM Vehicles Professional multi-camera blind spot system with factory integration for 2013+ RAM trucks The Echomaster FCTP-DR1304 Blind Spot Integration Camera System delivers comprehensive visibility enhancement for 2013+ RAM truck vehicles through factory-integrated mirror cameras and vehicle-specific data interface. This complete system features custom-engineered camera housings that replace OEM mirror covers for seamless factory appearance, providing 70° viewing angles with HD CMOS image sensors for enhanced side-view visibility. Designed specifically for RAM trucks with factory mirror indicators, this system offers dual integration options: direct connection to aftermarket radios with RCA camera inputs, or integration with OEM 8.4" uConnect radio systems using the additional PAC BCI-CH41 Camera Interface Kit (sold separately). The system maintains compatibility with existing factory or aftermarket reverse cameras. Echomaster FCTP-DR1304 Key Features & Benefits: Factory Mirror Replacement: Custom camera housings replace OEM mirror covers for seamless factory appearance HD CMOS Technology: High-definition image sensors provide crisp, detailed images with excellent night vision capability 70° Viewing Angle: Precisely engineered field of view eliminates blind spots during lane changes and maneuvering Dual Integration Options: Works with aftermarket radios or factory uConnect systems (with additional interface) Indicator Activation: Cameras activate automatically when turn signals are engaged for enhanced safety Multi-Camera Support: Retains existing reverse cameras while adding blind spot monitoring capability Technical Specifications: Model: Echomaster FCTP-DR1304 SKU: FCTP-DR1304 Image Sensor: HD CMOS technology Viewing Angle: 70° per camera Camera Configuration: Left and right mirror integrated cameras Night Vision: Enhanced low-light performance Integration Options: RCA video interface or uConnect integration (with PAC BCI-CH41) Activation: Turn signal triggered operation Kit Contents: Left Mirror Cover: Custom-engineered replacement with integrated camera Right Mirror Cover: Custom-engineered replacement with integrated camera Vehicle-Specific Harnesses: Complete wiring solution for RAM truck integration Video Signal Switching Interface: Manages multiple camera inputs RCA Video Interface: Direct connection capability for aftermarket systems Vehicle Compatibility: 2013+ RAM Trucks: Various model years and configurations Mirror Requirement: Factory indicators in mirror required (purchase separately if not equipped) Integration Options: Aftermarket radios with RCA inputs OR factory 8.4" uConnect (requires PAC BCI-CH41) Camera Compatibility: Retains factory or aftermarket reverse cameras Installation Applications: RAM Truck Safety Enhancement: Professional blind spot monitoring for work and personal vehicles Commercial Fleets: Safety system upgrades for RAM truck commercial applications Aftermarket Audio Integration: Blind spot cameras with custom stereo installations Factory System Enhancement: uConnect integration maintaining all factory functionality Professional Installations: Dealer and aftermarket shop safety system upgrades Frequently Asked Questions Will this work with my factory uConnect system? Yes, but requires additional PAC BCI-CH41 Camera Interface Kit (sold separately) for uConnect integration. Do I need mirror indicators for this to work? Yes, vehicle must have factory indicators in mirrors, or purchase mirror indicators separately from RAM dealership. Can I use this with my aftermarket radio? Yes, includes RCA video interface for direct connection to aftermarket radios with camera inputs. Will this affect my existing reverse camera? No, system retains factory or aftermarket reverse cameras while adding blind spot functionality. Is professional installation required? Yes, requires professional installation for proper integration and mirror cover replacement.

Read more less

Echomaster HDBJK Blind Spot Camera Kit Suitable for Jeep Wrangler JK Enhance your driving confidence and safety with the Echomaster HDBJK Blind Spot Camera Kit — designed for seamless installation on Jeep Wrangler JK and JKU models. The Echomaster Blind Spot Camera Kit provides a clear view of your vehicle’s sides, reducing blind spots and improving lane change safety. Perfect for off-road adventures or city driving, this kit is designed for simple installation with pre-assembled vehicle-specific brackets and cameras. Whether your Jeep’s doors are on or off, you’ll have dependable visibility when it matters most. Key Features & Benefits: Added Safety: Gain better side visibility to avoid dangerous lane changes and improve situational awareness. Works With Doors On or Off: Perfect for Jeep Wrangler JK and JKU owners who frequently go doorless. Pre-Assembled Kit: Includes cameras, brackets, and harnesses for straightforward installation. Standard 5-Pin Echomaster Connector: Comes with a 6.9ft extension harness for flexible setup. Reversible Installation: Mount without permanent modifications to the vehicle. Foam-Backed Mounts: Protects your Jeep’s paint during installation. Selectable AHD or Composite Video Output: Compatible with aftermarket monitors and Echomaster’s HEIGH10® system. Compatible With Multiple Displays: Works with any monitor featuring a composite NTSC input (AVS41 adapter required, sold separately). Durable & Reliable: IP67 waterproof rating, rugged design, and a 3-year warranty. Technical Specifications: Model: HDBJK SKU: HDBJK Brand: Echomaster Type: Blind Spot Camera Kit Resolution: AHD 720P (selectable) / CVBS 480P (selectable) Sensor: CMOS Viewing Angle: 80° Image Options: Mirrored or non-mirrored (selectable) Parking Lines: On/Off selectable Light Sensitivity: Operates at 0.1 LUX Water/Dust Resistance: IP67 rated Output Formats: AHD / Composite NTSC Compatibility: Jeep Wrangler JK (2-door) and JKU (4-door) Warranty: 3 years What's Included in the Kit: 2x Blind Spot Cameras 2x Mounting Brackets 2x Camera Extension Cables 2x Camera Power/Video Adapters 1x U-Shaped Camera Angle Adjustment Tool 1x Warranty Card Installation Applications: Blind Spot Monitoring: Reduce dangerous lane-change blind spots. Off-Road Visibility: Improve side awareness when tackling challenging trails. Customizable Setup: Works with Echomaster HEIGH10® or any compatible aftermarket display. Frequently Asked Questions Will this work if I remove my Jeep’s doors?Yes, the kit is designed for full functionality with or without doors installed. Is this kit pre-assembled?Yes, it includes pre-mounted cameras and brackets for fast installation. Can I connect these cameras to an aftermarket display?Yes, they work with compatible monitors and the Echomaster HEIGH10®. An AVS41 adapter is required for composite NTSC monitors (sold separately). Is it weatherproof?Yes, the cameras have an IP67 rating for dust and water protection. Does it come with a warranty?Yes, it includes a full 3-year Echomaster warranty for peace of mind.

Read more less

Echomaster FC-GMHD101-MC Blind Spot Integration Camera System - GM Professional multi-camera blind spot system with factory integration for Chevrolet Silverado and GMC Sierra HD The Echomaster FC-GMHD101-MC Blind Spot Integration Camera System delivers comprehensive visibility enhancement for 2014-2018 Chevrolet Silverado and GMC Sierra heavy-duty vehicles through factory-integrated mirror cameras and vehicle-specific data interface. This complete system features custom-engineered camera housings that integrate seamlessly into OEM heavy-duty tow mirrors, providing 70° viewing angles with HD CMOS image sensors for enhanced side-view visibility. Designed specifically for heavy-duty towing applications, this system maintains the rugged appearance of factory tow mirrors while adding professional blind spot monitoring capability. The system integrates directly with factory 4" or 8" infotainment screens, allowing selection between blind spot cameras, optional forward cameras, and existing reverse cameras through the vehicle's touchscreen interface. Echomaster FC-GMHD101-MC Key Features & Benefits: Factory Mirror Integration: Custom camera housings insert into OEM heavy-duty tow mirror bases for seamless appearance HD CMOS Technology: High-definition image sensors provide crisp, detailed images with excellent night vision capability 70° Viewing Angle: Precisely engineered field of view eliminates blind spots during lane changes and maneuvering Infotainment Integration: Full control through factory touchscreen with camera selection capability Heavy-Duty Design: Engineered specifically for Silverado and Sierra HD towing applications Multi-Camera Support: Integrates with existing reverse cameras, optional forward cameras, and trailer cameras Technical Specifications: Model: Echomaster FC-GMHD101-MC SKU: FC-GMHD101-MC Image Sensor: HD CMOS technology Viewing Angle: 70° per camera Camera Configuration: Left and right mirror integrated cameras Night Vision: Enhanced low-light performance Integration: Vehicle-specific data interface with factory infotainment Screen Compatibility: 4" Screen (IO4) and 8" Screen (IO5/IO6) Installation: Professional integration with factory wiring Kit Contents: Left Mirror Cover: Custom-engineered with integrated camera Right Mirror Cover: Custom-engineered with integrated camera Vehicle-Specific Data Interface: Factory infotainment integration module Interface Mounting Bracket: Professional installation hardware Vehicle Harness: Complete wiring solution for plug-and-play installation Vehicle Compatibility: 2014 Chevrolet Silverado: Including HD models with heavy-duty tow mirrors 2016-2018 Chevrolet Silverado: Including HD models with heavy-duty tow mirrors 2014 GMC Sierra: Including HD models with heavy-duty tow mirrors 2016-2018 GMC Sierra: Including HD models with heavy-duty tow mirrors Screen Requirements: 4" Screen (IO4 only) or 8" Screen (IO5/IO6 only) Mirror Type: Heavy-duty tow mirror design required Installation Applications: Heavy-Duty Towing: Enhanced visibility for large trailers, boats, and equipment transport Commercial Fleets: Professional safety enhancement for Silverado and Sierra work trucks Construction Applications: Improved job site safety and maneuvering capability Recreational Towing: RV and boat towing with enhanced blind spot awareness Professional Installations: Dealer and aftermarket shop safety system upgrades Frequently Asked Questions Will this work with my 2017 Silverado 2500HD? Yes, compatible with 2016-2018 Silverado HD models with heavy-duty tow mirrors and appropriate screen type. Do I need special mirrors for this system? Yes, designed specifically for heavy-duty tow mirror applications - standard mirrors not compatible. Can I add more cameras to this system? Yes, system supports forward cameras, trailer cameras, and bed cameras (available separately). Is professional installation required? Yes, requires professional installation for proper integration with factory infotainment and mirror replacement. Will this work with my 8-inch factory screen? Yes, compatible with 8" screens (IO5/IO6) - check your specific system type for compatibility.

Read more less

Echomaster FC-GMLD101-MC Blind Spot Integration Camera System - GM Professional multi-camera blind spot system with factory integration for Chevrolet Silverado and GMC Sierra standard mirrors The Echomaster FC-GMLD101-MC Blind Spot Integration Camera System delivers comprehensive visibility enhancement for 2014-2018 Chevrolet Silverado and GMC Sierra vehicles through factory-integrated mirror cameras and vehicle-specific data interface. This complete system features custom-engineered camera housings that replace OEM standard mirror covers for seamless factory appearance, providing 70° viewing angles with HD CMOS image sensors for enhanced side-view visibility. Designed specifically for vehicles with standard mirror configurations (non-towing mirrors), this system maintains the factory-fresh appearance while adding professional blind spot monitoring capability. The system integrates directly with factory 4" or 8" infotainment screens, allowing selection between blind spot cameras, optional forward cameras, and existing reverse cameras through the vehicle's touchscreen interface. Echomaster FC-GMLD101-MC Key Features & Benefits: Factory Mirror Replacement: Custom camera housings replace OEM standard mirror covers for seamless factory appearance HD CMOS Technology: High-definition image sensors provide crisp, detailed images with excellent night vision capability 70° Viewing Angle: Precisely engineered field of view eliminates blind spots during lane changes and maneuvering Infotainment Integration: Full control through factory touchscreen with camera selection capability Standard Mirror Design: Engineered specifically for Silverado and Sierra standard (non-towing) mirror applications Multi-Camera Support: Integrates with existing reverse cameras, optional forward cameras, and trailer cameras Technical Specifications: Model: Echomaster FC-GMLD101-MC SKU: FC-GMLD101-MC Image Sensor: HD CMOS technology Viewing Angle: 70° per camera Camera Configuration: Left and right mirror integrated cameras Night Vision: Enhanced low-light performance Integration: Vehicle-specific data interface with factory infotainment Screen Compatibility: 4" Screen (IO4) and 8" Screen (IO5/IO6) Installation: Professional integration with factory wiring Kit Contents: Left Mirror Cover: Custom-engineered replacement with integrated camera Right Mirror Cover: Custom-engineered replacement with integrated camera Vehicle-Specific Data Interface: Factory infotainment integration module Interface Mounting Bracket: Professional installation hardware Vehicle Harness: Complete wiring solution for plug-and-play installation Vehicle Compatibility: 2014 Chevrolet Silverado: Including HD models with standard mirror design 2016-2018 Chevrolet Silverado: Including HD models with standard mirror design 2014 GMC Sierra: Including HD models with standard mirror design 2016-2018 GMC Sierra: Including HD models with standard mirror design Screen Requirements: 4" Screen (IO4 only) or 8" Screen (IO5/IO6 only) Mirror Type: Standard mirror design (not for heavy-duty tow mirrors) Installation Applications: Standard Configuration Trucks: Enhanced safety for Silverado and Sierra with factory standard mirrors Commercial Fleets: Professional safety enhancement for work trucks without towing packages Daily Driving: Improved urban and highway safety with blind spot awareness Fleet Applications: Professional safety system upgrades for company vehicles Aftermarket Enhancement: Dealer and professional shop safety system installations Frequently Asked Questions What's the difference between this and the FC-GMHD101-MC? This model is for standard mirrors, while FC-GMHD101-MC is designed for heavy-duty towing mirrors. Will this work with my 2017 Silverado 1500? Yes, compatible with 2016-2018 Silverado models with standard mirrors and appropriate screen type. Do the cameras activate automatically? Yes, cameras activate when turn signals are engaged, providing blind spot visibility during lane changes. Can I add more cameras to this system? Yes, system supports forward cameras, trailer cameras, and bed cameras (available separately). Is professional installation required? Yes, requires professional installation for proper integration with factory infotainment and mirror replacement.

Read more less

Echomaster FCTP-MB1102 Mercedes Benz Blind Spot Integration Camera System - Sprinter Vans Professional multi-camera blind spot system with aftermarket integration for 2014-2018 Mercedes Sprinter vans The Echomaster FCTP-MB1102 Mercedes Benz Blind Spot Integration Camera System delivers comprehensive visibility enhancement for 2014-2018 Mercedes Benz Sprinter vans through factory-integrated mirror cameras and vehicle-specific data interface. This complete system features custom-engineered camera housings that replace OEM mirror covers for seamless factory appearance, providing 70° viewing angles with HD CMOS image sensors for enhanced side-view visibility. Designed specifically for Mercedes Sprinter vans with aftermarket infotainment systems, this system maintains factory functionality including steering wheel audio controls, USB socket retention, and existing reverse camera compatibility. The plug-and-play harness system enables professional installation while preserving all OEM features and adding blind spot monitoring capability. Echomaster FCTP-MB1102 Key Features & Benefits: Factory Mirror Replacement: Custom camera housings replace OEM mirror covers for seamless Mercedes factory appearance HD CMOS Technology: High-definition image sensors provide crisp, detailed images with excellent night vision capability 70° Viewing Angle: Precisely engineered field of view eliminates blind spots during lane changes and maneuvering Aftermarket Integration: Designed specifically for aftermarket infotainment systems with camera inputs Factory Feature Retention: Maintains steering wheel controls, USB socket, and reverse camera functionality Plug-and-Play Installation: Complete harness system enables professional installation without modification Technical Specifications: Model: Echomaster FCTP-MB1102 SKU: FCTP-MB1102 Image Sensor: HD CMOS technology Viewing Angle: 70° per camera Camera Configuration: Left and right mirror integrated cameras Night Vision: Enhanced low-light performance Integration: Aftermarket infotainment systems with reverse camera input Activation: Turn signal triggered operation Installation: Plug-and-play harness system Kit Contents: Left Mirror Cover: Custom-engineered Mercedes replacement with integrated camera Right Mirror Cover: Custom-engineered Mercedes replacement with integrated camera Vehicle-Specific Data Interface: Mercedes Sprinter integration module Vehicle Camera Harnesses: Complete camera wiring solution Vehicle USB Retention Harness: Maintains factory USB socket functionality Vehicle Compatibility: 2014-2018 Mercedes Benz Sprinter: All van configurations and models Integration Requirement: Aftermarket infotainment systems with reverse camera input Factory Feature Support: Steering wheel audio controls, USB socket, reverse camera retention Additional Camera Support: Forward-facing camera compatibility (if fitted) Installation Applications: Commercial Sprinter Vans: Enhanced safety for delivery, service, and transport applications Recreational Vehicle Conversions: Safety enhancement for Sprinter-based motorhomes and camper vans Fleet Applications: Professional safety system upgrades for commercial Sprinter fleets Aftermarket Audio Integration: Blind spot cameras with custom Mercedes infotainment installations Professional Installations: Dealer and aftermarket shop safety system upgrades Frequently Asked Questions Will this work with my factory Mercedes radio? This system is designed for aftermarket infotainment systems with camera inputs, not factory Mercedes radios. Do I lose steering wheel controls with aftermarket radio? No, this kit includes harnesses that retain factory steering wheel audio control functionality. Can I keep my factory reverse camera? Yes, system retains factory reverse cameras while adding blind spot monitoring capability. Will this work with my 2016 Sprinter? Yes, compatible with 2014-2018 Mercedes Benz Sprinter van models. Is professional installation required? Yes, requires professional installation for proper integration and mirror cover replacement with Mercedes systems.

Read more less

Echomaster FCTP-MB1903 Waterproof Lane Change Cameras - Mercedes Benz Sprinter Factory-matched blind spot cameras with IP67 weatherproofing for 2019+ Mercedes Sprinter extended towing mirrors The Echomaster FCTP-MB1903 Waterproof Lane Change Cameras deliver professional blind spot elimination for 2019+ Mercedes-Benz Sprinter utility vehicles through factory-matched side mirror caps with integrated weatherproof cameras. This complete system provides 80-degree optimized viewing angles with IP67 weatherproof rating and 0.1 LUX low-light performance, designed specifically for Sprinters with extended towing mirrors and factory 7" or 10.25" display radios. Engineered for commercial and utility applications, this system activates automatically with turn signals while supporting additional camera integration including reverse cameras and speed-controlled front cameras. The intelligent 4-camera integration module manages multiple video inputs for comprehensive vehicle monitoring capability. Echomaster FCTP-MB1903 Key Features & Benefits: Factory-Matched Integration: Mirror caps designed specifically for Mercedes Sprinter extended towing mirrors IP67 Weatherproof Rating: Professional-grade weatherproofing withstands harsh commercial operating conditions 80-Degree Viewing Angle: Optimized field of view eliminates blind spots during lane changes and maneuvering Turn Signal Activation: Cameras automatically activate with left and right turn signals for enhanced safety Multi-Camera Support: Intelligent integration module supports reverse cameras and speed-controlled front cameras Low-Light Performance: 0.1 LUX capability provides clear visibility in dawn, dusk, and night conditions Technical Specifications: Model: Echomaster FCTP-MB1903 SKU: FCTP-MB1903 Viewing Angle: 80 degrees optimized Weatherproof Rating: IP67 (dust tight, waterproof) Low-Light Performance: 0.1 LUX minimum illumination Camera Configuration: Left and right mirror integrated cameras Activation: Turn signal triggered operation Integration: Intelligent 4-camera integration module Display Compatibility: Factory 7" or 10.25" display radio Kit Contents: Two Factory-Matching Mirror Caps: Mercedes Sprinter extended towing mirror specific Two Weatherproof Cameras: IP67 rated with optimized viewing angles Two Camera Extension Harnesses: Professional-grade wiring for extended installations Intelligent 4-Camera Integration Module: Multi-camera management system Warranty Card: Product warranty documentation Installation Manual: Comprehensive installation instructions Vehicle Compatibility: 2019+ Mercedes-Benz Sprinter: All utility vehicle configurations Mirror Requirement: Extended towing mirrors (not compatible with standard mirrors) Display Requirements: Factory 7" or 10.25" display radio systems Camera Support: Reverse camera integration and speed-controlled front camera capability Installation Applications: Commercial Utility Vehicles: Enhanced safety for delivery, service, and transport Sprinters Fleet Applications: Professional safety system upgrades for commercial Sprinter fleets Recreational Vehicle Conversions: Safety enhancement for Sprinter-based motorhomes with extended mirrors Professional Installations: Dealer and aftermarket shop safety system upgrades Heavy-Duty Applications: Enhanced visibility for Sprinters with towing and cargo applications Frequently Asked Questions Will this work with standard Sprinter mirrors? No, this system is specifically designed for extended towing mirrors only. What's the difference between this and the FCTP-MB1102? This model is for 2019+ Sprinters with extended mirrors and factory displays, while MB1102 is for 2014-2018 models with aftermarket systems. Can I add more cameras to this system? Yes, the intelligent integration module supports reverse cameras and speed-controlled front cameras. Is this weatherproof for outdoor commercial use? Yes, IP67 rating provides dust-tight and waterproof protection for harsh commercial environments. Will this work with my 2020 Sprinter 2500? Yes, compatible with all 2019+ Mercedes-Benz Sprinter models with extended towing mirrors and factory displays.

Read more less