LED Autolamps 102R 12V Round LED Stop Tail Lamp Red Lens 130mm Diameter Low Profile Recessed Mount ADR Approved IP67 The LED Autolamps 102R is a 12V round LED stop/tail lamp with a red lens in a 130mm diameter low-profile recessed mount format. ADR approved, IP67 waterproof. Five-year warranty. Sold individually. Product overview The 102R is a round recessed-mount stop/tail lamp suited to trailers, caravans, and commercial vehicles where a flush or near-flush installation is required. The red lens and 130mm diameter suit standard round panel cutouts. The 12mm depth provides a low-profile appearance on the panel. ADR approved for road use in Australia. 12V only. IP67 rated for full waterproof and submersion protection. Features and benefits Red lens stop/tail lamp: Correct red lens output for ADR-compliant road use as a stop/tail lamp. 130mm round, 12mm depth: Low-profile recessed mount for a flush panel installation. ADR approved: Compliant for road use in Australia as a stop/tail lamp. IP67 fully waterproof and submersible: Suited to trailer, caravan, and off-road environments. 12V only. Five-year warranty. Sold individually. Technical specs Specification Detail SKU 102R Brand LED Autolamps Type Stop/tail lamp Light Type LED Lens Colour Red Operating Voltage 12V Mount Type Recessed Diameter 130mm Depth 12mm Waterproof Rating IP67 ADR Approved Yes Weight 0.196kg Manufactured In China (Taiwan) Sold As Each Warranty Five years Frequently asked questions Is the 102R ADR approved? Yes. The 102R carries ADR approval, confirming compliance for road use in Australia as a stop/tail lamp. What voltage does the 102R operate on? The 102R is 12V only and is not suitable for 24V systems. What type of mount does the 102R use? The 102R uses a low-profile recessed mount with a 130mm diameter and 12mm depth for a flush panel installation. Is the 102R suitable for submersion? Yes. The IP67 rating confirms the 102R is fully dustproof and submersible in water up to 1 metre for up to 30 minutes. Is the 102R sold as a single unit or a pair? Sold individually. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 102ACM 12-24V Round LED Indicator Lamp Clear Lens 130mm Diameter Low Profile Recessed Mount ADR Approved IP67 The LED Autolamps 102ACM is a 12-24V round LED indicator lamp with a clear lens in a 130mm diameter low-profile recessed mount format. ADR approved, IP67 waterproof. Surface bases available separately. Five-year warranty. Sold individually. Product overview The 102ACM is the 12-24V version of the LED Autolamps 130mm round clear lens indicator lamp range, suited to trailers, caravans, trucks, and commercial vehicles. The clear lens provides a clean, unobtrusive appearance when the lamp is not illuminated. The 130mm diameter and 12mm depth suit standard round panel cutouts for recessed installation. Surface bases are available separately for surface mount applications where a recessed cutout is not practical. ADR approved for road use in Australia. Features and benefits Clear lens: Appears unobtrusive when the lamp is inactive, illuminates with indicator output when active. 130mm round, 12mm depth: Low-profile recessed mount for a flush panel installation. Surface bases available separately: Suits surface mount applications where a recessed cutout is not practical. ADR approved: Compliant for road use in Australia as an indicator lamp. IP67 fully waterproof and submersible: Suited to trailer, caravan, and off-road environments. 12V and 24V compatible: Suits light vehicle trailers, caravans, trucks, and heavy transport. Five-year warranty. Sold individually. Technical specs Specification Detail SKU 102ACM Brand LED Autolamps Type Indicator lamp Light Type LED Lens Clear Operating Voltage 12V to 24V Mount Type Recessed Diameter 130mm Depth 12mm Surface Base Available separately Waterproof Rating IP67 ADR Approved Yes Weight 0.196kg Manufactured In China (Taiwan) Sold As Each Warranty Five years Frequently asked questions Is the 102ACM ADR approved? Yes. The 102ACM carries ADR approval, confirming compliance for road use in Australia as an indicator lamp. What voltage does the 102ACM operate on? The 102ACM operates on 12V and 24V systems, making it suited to light vehicle trailers, caravans, trucks, and commercial vehicles. What is the difference between the 102ACM and the 102AC? The 102AC is 12V only. The 102ACM operates on both 12V and 24V systems, making it suited to heavy transport and dual-voltage applications. Both share the same 130mm clear lens recessed format. What type of mount does the 102ACM use? The 102ACM uses a low-profile recessed mount with a 130mm diameter and 12mm depth. Surface bases are available separately for surface mount installations. Is the 102ACM sold as a single unit or a pair? Sold individually. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 100BSTIM Stop Tail and Indicator Lamp 100x100mm with Bracket An ADR road-approved LED stop, tail, and indicator lamp from the LED Autolamps Original Square Series, the 100BSTIM features an IP67 rating, clip-in replaceable lens, surface mount bracket, pre-wired connector, and operates across 12-24V DC, backed by a 5-year warranty. Product Overview The LED Autolamps 100BSTIM is a combined stop, tail, and indicator lamp from the Original Square Series, designed for surface mount installation on trailers, caravans, and commercial vehicles. The unit measures 122 x 122 x 31mm overall with a centre-to-centre mounting distance of 70mm and is housed in a black housing. The clip-in replaceable lens allows lens replacement without full unit replacement if the lens is damaged. The 100BSTIM operates across a 12-24V DC voltage range and draws 0.17A for stop, 0.04A for tail, and 0.18A for indicator functions at 13.8V. IP67-rated for waterproof and dustproof protection, ADR road approved with individual compliance numbers for stop, tail, and indicator functions, and supplied with a bracket in blister packaging. Features & Benefits Original Square Series Design: The 100BSTIM is from LED Autolamps' Original Square Series, featuring the distinctive 100x100mm square lamp profile suited to trailers, caravans, and commercial vehicles. ADR Road Approved: The 100BSTIM holds ADR road approval (CTA060218) with individual compliance numbers for stop (CRN35781), tail (CRN35782), and indicator (CRN35783) functions, confirming it meets Australian Design Rules requirements for on-road use. IP67 Waterproof and Dustproof Rating: The IP67 rating provides full dust ingress protection and waterproof protection against temporary immersion, suited to exposed trailer and caravan mounting locations. Clip-In Replaceable Lens: The clip-in lens design allows the lens to be replaced without replacing the full lamp unit, reducing long-term maintenance costs if the lens is scratched or damaged. Combined Stop, Tail, and Indicator Functions: The 100BSTIM combines stop, tail, and indicator functions in a single compact unit, reducing the number of individual lamp assemblies required and simplifying wiring. 12-24V DC Operating Range: The 100BSTIM operates across 12-24V DC, making it compatible with both 12V passenger vehicle and trailer systems and 24V commercial vehicle and trailer systems. Surface Mount with Bracket Included: The 100BSTIM is supplied with a surface mount bracket for secure installation to trailer, caravan, or vehicle body panels with a 70mm centre-to-centre mounting distance. Pre-Wired Connector: The lamp is supplied pre-wired for straightforward connection to the trailer or vehicle wiring harness without requiring additional connector assembly. 5-Year Warranty: The 100BSTIM is backed by a 5-year LED Autolamps warranty. Technical Specs Specification Detail SKU 100BSTIM Brand LED Autolamps Series Original Square Series Light Style Stop, Tail, and Indicator Light Type LED Housing Colour Black Overall Dimensions 122mm x 122mm x 31mm Mount Centre-to-Centre 70mm Mount Type Surface Mount Input Voltage 12-24V DC Current Draw - Stop 0.17A at 13.8V Current Draw - Tail 0.04A at 13.8V Current Draw - Indicator 0.18A at 13.8V IP Rating IP67 Lens Clip-In Replaceable Connector Pre-Wired ADR Approval CTA060218 Stop Compliance CRN35781 Tail Compliance CRN35782 Indicator Compliance CRN35783 Weight 0.28kg Packaging Blister Warranty 5 Years Compatible With The 100BSTIM is compatible with 12V and 24V DC trailer, caravan, and vehicle electrical systems. ADR road approved for on-road use in Australia. Confirm mounting clearance and wiring requirements for your specific trailer or vehicle before purchase. Frequently Asked Questions Is the 100BSTIM ADR approved for on-road use in Australia? Yes. The 100BSTIM holds ADR approval (CTA060218) with individual compliance numbers for stop (CRN35781), tail (CRN35782), and indicator (CRN35783) functions, confirming it meets Australian Design Rules requirements for on-road use. Can the lens on the 100BSTIM be replaced if damaged? Yes. The 100BSTIM features a clip-in replaceable lens design, allowing the lens to be replaced without replacing the full lamp unit if the lens is scratched or damaged. Is the 100BSTIM suitable for 24V vehicles and trailers? Yes. The 100BSTIM operates across a 12-24V DC voltage range, making it compatible with both 12V and 24V vehicle and trailer electrical systems. What is the mounting centre-to-centre distance of the 100BSTIM? The 100BSTIM has a mounting centre-to-centre distance of 70mm. Confirm this measurement suits your specific mounting panel and bracket location before purchase. Does the 100BSTIM include a mounting bracket? Yes. The 100BSTIM is supplied with a surface mount bracket for installation to trailer, caravan, or vehicle body panels. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR and ECE Approved Amber/Red Side Marker A Direct Globe Replacement for Trucks, Trailers, and Commercial Vehicles. Product Overview The LED Autolamps 69ARM is an amber/red side marker light designed as a retrofit replacement for traditional globe-type side marker lamps on trucks, semi-trailers, caravans, and commercial vehicles. Carrying both ADR and ECE road approvals, it meets Australian compliance requirements while also satisfying European ECE certification suitable for imported vehicles and fleet operators across multiple compliance frameworks. Rated at multivolt 12V to 24V and IP67 waterproof, the 69ARM installs directly into existing globe-type side marker housings with no modification required. The LED light source eliminates the globe replacement cycle, reducing ongoing maintenance cost and vehicle downtime on fleet trucks and trailers where side marker globe failures are a routine service item. Backed by a 5-year warranty and sold individually as a blister pack. Key Specifications Colour: Amber/Red Light style: Side marker light Voltage: 12V – 24V (multivolt) IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR and ECE road approved Design: Retrofit — replaces globe type Dimensions: 120mm (L) × 64mm (W) × 22mm (D) Packaging: Blister pack Sold as: Each Warranty: 5 years Current draw: Not specified — confirm with LED Autolamps Mount type: Not specified — confirm with LED Autolamps Connector type: Not specified — confirm with LED Autolamps Compliance codes: Not specified — confirm with LED Autolamps Features & Benefits Retrofit Globe Replacement Design — Engineered to fit directly into existing globe-type side marker lamp housings without modification, making it a straightforward upgrade for vehicles and trailers currently running incandescent globe side markers. ADR and ECE Road Approved — Dual compliance covering both Australian Design Rules and European ECE regulations — suited to Australian-registered vehicles and imported commercial vehicles requiring multi-standard certification. IP67 Waterproof Rating — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes — protected against wash-downs, rain, and road spray in Australian transport and touring conditions. 12V – 24V Multivolt — Works natively on both 12V and 24V systems without modification, covering passenger vehicles, caravans, and 24V commercial trucks in a single SKU. No Globe Replacement Required — LED technology eliminates the routine globe replacement cycle. On fleet vehicles running numerous side markers, this reduces procurement cost, labour, and vehicle downtime associated with regular globe servicing. 5-Year Warranty — A 5-year manufacturer's warranty provides long-term confidence well beyond the service life of the globe-type lamp it replaces. Technical Specs Specification Detail Brand LED Autolamps Part Number 69ARM Colour Amber/Red  Light Style Side Marker Light Light Type LED Voltage 12V – 24V (Multivolt) IP Rating IP67 Compliance ADR Road Approved / ECE Approved Compliance Codes Not specified — confirm with LED Autolamps Design Retrofit — Replaces Globe Type Length 120mm Width 64mm Depth 22mm Packaging Blister Pack Sold As Each Current Draw Not specified Mount Type Not specified Connector Type Not specified Warranty 5 Years Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) with existing globe-type side marker housings B-doubles and road trains requiring side marker compliance Caravans and camper trailers Box trailers and flatbed trailers Buses and coaches Imported commercial vehicles requiring ECE compliance Any vehicle currently running globe-type side markers Pairs well with: LED Autolamps 69RM rear end outline marker (matching retrofit globe replacement in the same range) LED Autolamps combination stop/tail/indicator lamp assemblies LED Autolamps 58RM rear position markers Frequently Asked Questions Is the 69ARM an amber lamp, a red lamp, or does it provide both colours? The supplier lists this product as "Amber/Red" but does not clarify whether this is a single lamp with dual amber and red output zones, or whether the SKU covers two separate colour variants sold individually. Confirm with LED Autolamps before purchasing to ensure you receive the correct colour for your application. Does the 69ARM require a new housing or does it fit an existing globe-type fitting? The 69ARM is designed as a retrofit replacement for existing globe-type side marker lamp housings — intended to fit directly without modification. Confirm dimensional compatibility with your specific housing before purchasing, as housing profiles vary across vehicle makes and models. Will the 69ARM work on both 12V and 24V vehicles? Yes. The multivolt 12V to 24V operating range covers both light passenger and recreational vehicles and 24V heavy commercial trucks without any modification or voltage-specific variants. What does IP67 mean for a side marker lamp? IP67 means the lamp is completely sealed against dust and can withstand water immersion to 1 metre for 30 minutes — protecting it against rain, road spray, wash-downs, and wet crossings encountered in Australian transport and touring conditions. Does the 69ARM carry specific ADR compliance codes for documentation purposes? ADR and ECE approvals are confirmed by the supplier, but specific compliance code numbers (equivalent to CRN 36840 on the 69RM) are not included in the supplier data for this SKU. Contact LED Autolamps for the specific approval numbers if required for fleet compliance documentation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

To Ensure Excellence in The Quality of Finished Products, J.W. Speaker’s In-House Capabilities J.W. Speaker 990145 Features: Super bright: 120/60 LM Lumen Colour Temp : 6000K White Ultra Longer Life Operating voltage: DC 12V - 24 V / Low Current Draw- Operating Temp: -40° / +80° C (130° Max) Shock Resistant Not approved for ADR, ECE or DOT J.W. Speaker 990145 Specifications: Globe Base BA15s Globe Style Bayonet Watts 10/5 Voltage 12 or 24 Pack Qty 2 Globe Type LED Weight 2.5kg Legendary Products & Support From Authorized Dealers When you choose JW Speaker, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JW Speaker dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JW Speaker's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JW Speaker dealer today!

Read more less

Wedge Globe 12V 2W Standard Features: Standard replacement wedge globes offer 30% more light at no additional cost The Phillips premium range is the choice for standard replacement. Specifications: Warranty One Year Globe Base W2.1x9.5d Globe Style Wedge Watts 2 Voltage 12V Pack Qty 10 Globe Type Standard Legendary Products & Support From Authorized Dealers When you choose Philips, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Philips dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Philips's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Maxilamp Stop/Tail/Indicator/Reflector Black ABS, PMMA Acrylic Lens, IP67, 7-Year Warranty Product Overview The LED Autolamps MAXILAMPC1XCE is the black ABS variant of the Maxilamp series rear combination lamp, with a PMMA acrylic lens and 2-bolt mounting, covering stop, tail, indicator, and integrated reflex reflector functions in a 125mm round x 40mm housing. Same 7-year warranty and ECE road approval as the MAXILAMP1XC. IP67 rated and backed by a 7-year warranty. Features & Benefits 7-year warranty — the longest warranty in the LED Autolamps range PMMA acrylic lens — UV-resistant acrylic for good optical clarity and long-term durability ABS base — lightweight, impact-resistant thermoplastic housing Black housing — clean, professional finish for trailer and truck rear panels 2-bolt mount — secure, fixed installation for high-vibration transport environments Stop, tail, indicator, and reflex reflector — four functions in a single 125mm round unit Inbuilt reflex reflector — integrated passive reflector for additional rear visibility and compliance ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU MAXILAMPC1XCE Lamp Type Stop / Tail / Indicator / Reflector Voltage Range 12V / 24V Dimensions 125mm round x 40mm Lens Material PMMA Acrylic Base Material ABS Housing Colour Black Reflector Inbuilt reflex Mounting 2-bolt surface mount Protection Rating IP67 Compliance ECE Warranty 7 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a premium round rear combination lamp with extended warranty 12V light vehicles and 24V heavy transport applications LED Autolamps MAXILAMP1XC (same Maxilamp series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the MAXILAMPC1XCE approved for road use in Australia? Yes. The MAXILAMPC1XCE is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. How does the MAXILAMPC1XCE differ from the MAXILAMP1XC? The MAXILAMPC1XCE specifies a black ABS base, PMMA acrylic lens, and 2-bolt mounting. Both carry the same ECE approval, IP67 rating, and 7-year warranty in the same 125mm round form factor. What is the advantage of PMMA acrylic over polycarbonate? PMMA acrylic offers good optical clarity and UV resistance for outdoor lamp lenses. Polycarbonate is generally more impact-resistant but can yellow with prolonged UV exposure without UV coating. Acrylic suits applications where clarity over the long term is prioritised. What is the IP rating on the MAXILAMPC1XCE? The MAXILAMPC1XCE is rated IP67 — fully sealed against dust and capable of withstanding water immersion. What warranty does the MAXILAMPC1XCE carry? The MAXILAMPC1XCE is backed by a 7-year warranty from LED Autolamps — the longest offered in the range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

SAE Class 1 & ECE R65 Approved Amber Emergency Mini Light Bar with 18 Flash Patterns Product Overview The LED Autolamps LB246ACM is a heavy-duty amber emergency mini light bar designed for 10–30V applications across light and heavy transport. Fitted with 30 x 1W high-brightness LEDs behind a clear lens, it delivers powerful amber output with 18 selectable flash patterns giving operators the flexibility to match flash mode to their specific application or regulatory requirement. Carrying both SAE/J845 Class 1 and ECE R65/ECE R10 approvals, the LB246ACM meets the certification standards demanded by emergency, warning, and service vehicle operators. Rated IP65 and tested across a temperature range of -40°C to +60°C, it's built to perform reliably in the harsh conditions found across Australian roads, job sites, and long-haul routes. Features & Benefits 30 x 1W high-brightness LEDs — delivers strong, consistent amber output for maximum visibility in emergency and warning applications 18 selectable flash patterns — operators can choose the flash mode best suited to their application or local compliance requirements SAE/J845 Class 1 compliant — meets the highest SAE warning light classification for emergency and hazard warning use ECE R65 & ECE R10 approved — internationally recognised certifications for warning lamps, accepted across Australian and export markets 10–30V multi-voltage — compatible with 12V light vehicles through to 24/28V heavy transport without modification IP65 rated — protected against dust ingress and low-pressure water jets, suited to exposed vehicle-mounted applications -40°C to +60°C operating range — engineered to handle extreme cold and heat, including the temperature swings common in Australian outback and alpine environments Heavy-duty emergency minibar construction — compact form factor with robust build quality trusted by manufacturers and auto electricians alike Technical Specs Specification Detail SKU LB246ACM LED Quantity 30 x 1W Voltage Range 10V – 30V Current Draw 1.63A @ 13.8V / 0.56A @ 28V Cable Length 450mm Flash Patterns 18 selectable LED Colour Amber Lens Colour Clear Protection Rating IP65 Operating Temperature -40°C to +60°C Compliance SAE/J845 Class 1, ECE R65, ECE R10 Weight 2.00 kg Compatible With / Goes Well With Emergency, warning, and service vehicles requiring SAE Class 1 or ECE R65 compliant lighting 12V light commercial and passenger vehicles 24V heavy transport, trucks, and plant equipment Road maintenance, tow trucks, escort vehicles, and utility fleets LED Autolamps wiring harnesses and emergency lighting accessories Frequently Asked Questions What compliance certifications does the LB246ACM carry? It is SAE/J845 Class 1 compliant and holds ECE R65 and ECE R10 approvals, covering the major international and Australian standards for emergency warning lamps. How many flash patterns does the LB246ACM offer? The LB246ACM features 18 selectable flash patterns, allowing operators to choose the most appropriate mode for their application or local regulatory requirements. What voltage range does the LB246ACM support? It operates across 10V to 30V, making it compatible with both 12V light vehicles and 24V/28V heavy transport applications without any modification. What is the IP rating and operating temperature range? The LB246ACM is rated IP65 and is designed to operate between -40°C and +60°C, making it suitable for extreme Australian conditions including outback heat and alpine cold. What colour are the LEDs and lens? The LB246ACM features amber LEDs behind a clear lens, delivering high-visibility amber output suitable for emergency and hazard warning applications. Weight 2.00 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Rear Indicator Lamp with Inbuilt Reflex Reflector Individually Mountable, IP67, 5-Year Warranty Product Overview The LED Autolamps 460AM is a 12/24V rear indicator lamp with an integrated reflex reflector, designed for individually mountable surface installation via an included bracket. The inbuilt reflector adds passive rear visibility and compliance without requiring a separate reflector unit. IP67 rated and backed by a 5-year warranty. Features & Benefits Inbuilt reflex reflector — integrated passive reflector adds rear visibility and compliance in a single fitting Individually mountable with bracket — supplied with a bracket for flexible surface mounting on trailer and truck body panels IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460AM Lamp Type Rear Indicator / Reflector Voltage Range 12V / 24V Mounting Surface mount with bracket Protection Rating IP67 Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring individually mounted rear indicator lamps 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What road approval standard does the 460AM carry? Compliance certification was not confirmed in available supplier data — verify before road use. What does the inbuilt reflex reflector provide? The reflector is a passive element that reflects light from other vehicles back towards the source, providing additional rear visibility and passive compliance without a separate reflector unit. What does individually mountable mean? The 460AM comes with a bracket allowing it to be surface mounted independently on trailer and truck body panels rather than as part of a multi-lamp assembly. What is the IP rating on the 460AM? The 460AM is rated IP67 — fully sealed against dust and capable of withstanding water immersion. What warranty does the 460AM carry? The 460AM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Interior LED Strip Lamp with Touch Switch Aluminium Housing, Polycarbonate Lens, 3-Year Warranty Product Overview The LED Autolamps 40260MCU is a 12/24V interior LED strip lamp with a built-in touch sensor switch, housed in an aluminium body with a polycarbonate lens. The slim, low-profile design suits caravan, truck cab, motorhome, and commercial vehicle interior installations — available in black or silver finish to match a range of interior styles. The touch switch provides convenient on/off control directly at the fitting. Backed by a 3-year warranty. Features & Benefits Built-in touch sensor switch — on/off control integrated directly into the lamp for convenient hands-free operation Aluminium housing — robust, lightweight housing with superior heat dissipation compared to plastic housings Polycarbonate lens — impact-resistant lens with good optical clarity Black or silver finish — two colour options to match different caravan and vehicle interior aesthetics Low-profile slimline design — sits neatly on ceilings and panels without bulk High-brightness SMD LEDs — even, consistent interior illumination 12/24V dual voltage — compatible with both 12V and 24V vehicle and equipment electrical systems 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 40260MCU Lamp Type Interior Strip Lamp Switch Built-in touch sensor Housing Material Aluminium Lens Material Polycarbonate Finish Options Black or Silver Voltage Range 12V / 24V Warranty 3 years Shipping Weight 0.155 kg Compatible With / Goes Well With Caravan interiors, truck cabs, motorhomes, and commercial vehicle cabins 12V and 24V vehicle and equipment electrical systems LED Autolamps 16606WM-SW small oval touch switch lamp (same touch concept, different form factor) LED Autolamps 20109WM-SW large oval touch switch lamp (same touch concept, different form factor) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions What colours is the 40260MCU available in? The 40260MCU is available in black or silver finish. How does the touch switch work? The touch sensor is integrated into the lamp body — a light touch activates or deactivates the lamp without a separate wall switch, making it ideal for caravan and vehicle interior applications. What are the benefits of an aluminium housing? Aluminium dissipates heat more effectively than plastic, helping maintain LED performance and extending lamp life — particularly useful in enclosed interior spaces where heat can accumulate. What voltage range does the 40260MCU support? It operates across 12V to 24V, making it compatible with both 12V caravan and vehicle systems and 24V commercial vehicle and heavy transport electrical systems. What warranty does the 40260MCU carry? The 40260MCU is backed by a 3-year warranty from LED Autolamps. Weight 0.155 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

One Lamp, Four Functions ADR-Approved Combination Tail Lighting Built for Trucks, Trailers, and Touring Caravans. Product Overview The LED Autolamps 283ARWM is a 4-in-1 combination LED tail lamp delivering stop, tail, indicator, and reverse lighting from a single compact unit. Designed for trucks, semi-trailers, caravans, and heavy vehicles, it consolidates four compliance-critical rear lighting functions into one ADR-approved assembly reducing installation complexity, minimising wiring runs, and cutting the number of separate lamps required to meet Australian road regulations. At 283mm long and just 25mm deep, the 283ARWM is low-profile enough for flush trailer body mounting while the removable bracket offers flexible installation options across a range of vehicle and trailer configurations. Inbuilt reflectors eliminate the need for a separate rear reflector, keeping the installation clean and compliant. Dual voltage operation across 12V and 24V suits the full range of Australian commercial and recreational vehicles, and the IP67 rating and 5-year warranty back it for the long haul. Key Specifications Light functions: Stop / Tail / Indicator / Reverse (4-in-1) Voltage: 12V / 24V (dual voltage) IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR Road Approved Mount type: Screw or bolt mounting with removable bracket Inbuilt reflectors: Yes Dimensions: 283mm (L) × 100mm (W) × 25mm (D) Light type: LED Warranty: 5 years Features & Benefits 4-in-1 Combination Function — Stop, tail, indicator, and reverse in a single lamp assembly. One unit replaces up to four separate lamps, cutting installation time, reducing cable complexity, and simplifying compliance checks on trucks, trailers, and caravans. Inbuilt Reflectors — Factory-integrated reflectors meet ADR rear reflector requirements without needing a separate unit, reducing the total number of components on the vehicle and delivering a cleaner finished installation. ADR Road Approved — Meets Australian Design Rules for all four lighting functions, confirming full road-legal compliance from the moment it's fitted — no third-party sign-off required. IP67 Waterproof Rating — Fully sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes. Built for the wash-downs, creek crossings, and heavy rain encountered on Australian work and touring vehicles. 12V / 24V Dual Voltage — Works natively across both light vehicle and heavy transport electrical systems without modification — a single SKU for your entire fleet or mixed-vehicle setup. Removable Mounting Bracket — The bracket can be fitted or removed to suit different trailer body profiles and mounting configurations, giving installers flexibility without compromising the lamp's ADR approval. Low Profile 25mm Depth — At just 25mm deep, the 283ARWM sits close to the trailer or vehicle body, reducing the risk of impact damage on tight loading docks, underbody clearance situations, and reversing manoeuvres. 5-Year Warranty — Backed by one of the stronger warranties in the combination lamp category, reflecting LED Autolamps' confidence in the product's durability across demanding Australian operating conditions. Technical Specs Specification Detail Brand LED Autolamps Part Number 283ARWM Light Functions Stop / Tail / Indicator / Reverse Light Type LED Voltage 12V / 24V (Dual Voltage) IP Rating IP67 Compliance ADR Road Approved Mount Type Screw or Bolt — Removable Bracket Inbuilt Reflectors Yes Length 283mm Width 100mm Depth 25mm Warranty 5 Years Lumen Output Not specified — confirm with LED Autolamps Current Draw Not specified — confirm with LED Autolamps Lens Colour Not specified — confirm with LED Autolamps Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) B-doubles and road trains Caravans and camper trailers Box trailers and flatbed trailers Horse floats and stock trailers Buses and coaches Heavy haulage and plant transport vehicles Custom trailer builds requiring ADR-compliant combination rear lighting Pairs well with: LED Autolamps front and side marker lights for a matched full-vehicle LED lighting upgrade LED Autolamps wiring harness accessories LED Autolamps clearance lights and number plate lights Frequently Asked Questions What lighting functions does the 283ARWM provide? The 283ARWM is a 4-in-1 combination lamp providing stop, tail, indicator, and reverse lighting from a single unit — covering all four primary rear lighting compliance functions required under Australian road regulations. Does this lamp comply with Australian road regulations? Yes. The 283ARWM carries full ADR (Australian Design Rules) approval for all four lighting functions, including inbuilt reflectors, making it road-legal for use on vehicles operated on Australian public roads and highways. What does the removable bracket allow for installation? The removable bracket provides flexibility for different trailer body profiles and mounting surfaces. The lamp can be installed directly with screws or bolts, or using the bracket for surface-mounted or recessed applications depending on the vehicle or trailer configuration. Is this lamp suitable for both 12V caravans and 24V trucks? Yes. The 283ARWM operates across 12V and 24V without modification, making it suitable for use on both light recreational vehicles and heavy commercial transport in a single SKU. What does the IP67 rating mean for a tail lamp in outdoor use? IP67 means the lamp is completely sealed against dust and can withstand water immersion to 1 metre for 30 minutes — protecting against rain, wash-downs, creek crossings, and the high-pressure cleaning common in fleet and transport maintenance environments. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less