ADR Approved Multi-Volt Round Amber Indicator Lamp Low-Profile Recessed Mount with 5-Year Warranty Product Overview The LED Autolamps 102AM is a multi-voltage round indicator lamp with an amber lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 130mm in diameter at just 12mm deep, it delivers a flush, clean finish across a wide range of trailer and vehicle body applications. Surface bases are available for installations requiring surface mounting rather than recessed fitting. ADR Australian road approved and rated IP67, the 102AM is backed by a 5-year warranty and as the amber lens counterpart to the clear lens 102ACM, it suits applications where a traditional amber indicator appearance is preferred. Features & Benefits Amber lens — delivers traditional amber indicator output with a consistently coloured lens appearance whether active or inactive Low-profile recessed mount — 12mm depth sits flush with the mounting panel for a clean, integrated finish on trailer and truck bodies Surface bases available — for installations requiring surface mounting rather than recessed fitting; contact F.A.E. for compatible surface base options ADR Australian road approved — meets Australian Design Rules for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 102AM Lamp Type Indicator Lens Colour Amber Voltage Range 12V / 24V Diameter 130mm Depth 12mm Mounting Low-profile recessed (surface base available) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed amber indicator lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved indicator lighting Compatible surface mount bases (available separately — confirm with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102AM approved for road use in Australia? Yes. The LED Autolamps 102AM is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. How does the 102AM differ from the 102ACM? The 102AM uses an amber lens for a traditional indicator appearance, while the 102ACM features a clear lens that appears colourless when inactive. Both share the same 130mm round recessed mount form factor and multi-voltage compatibility. What mounting options are available for the 102AM? The 102AM is designed for low-profile recessed mounting. Surface bases are also available for surface mount installations — contact F.A.E. for compatible options. What is the IP rating on the 102AM? The 102AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 102AM carry? The 102AM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Round Indicator Lamp Clear When Inactive, Low-Profile Recessed Mount Product Overview The LED Autolamps 102AC is a 12V round indicator lamp with a clear lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. At 130mm in diameter and just 12mm deep, it sits flush with the mounting panel for a clean, unobtrusive finish. The clear lens appearance when inactive gives the 102AC a modern, sleek look that complements a wide range of trailer and vehicle body styles the amber indicator colour activates only when the lamp is in use. ADR road approved and rated IP67, it is backed by a 5-year warranty for long-term confidence. Features & Benefits Clear lens when inactive — the lamp presents a clean, clear appearance at rest; amber indicator colour activates only when the lamp is energised Low-profile recessed mount — 12mm depth sits flush with the mounting panel for an integrated finish on trailer and truck bodies 130mm round form factor — suits standard recessed cutouts on trailers, caravans, and commercial vehicles ADR road approved — meets Australian Design Rules for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 102AC Lamp Type Indicator Lens Colour Clear (inactive) Voltage 12V Diameter 130mm Depth 12mm Mounting Low-profile recessed Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed indicator lamps 12V trailer and vehicle electrical systems Trailer builds requiring ADR-approved indicator lighting with a clean, clear finish LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102AC approved for road use in Australia? Yes. The LED Autolamps 102AC is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. What does "clear lens when inactive" mean? When the lamp is not energised, the lens appears clear rather than amber. The amber indicator colour is produced by the LEDs and only visible when the lamp is activated. What is the IP rating on the 102AC? The 102AC is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. How does the 102AC differ from the 102A? The 102AC features a clear lens that appears colourless when inactive, while the 102A uses an amber lens. Both are 12V recessed mount lamps in the same 130mm round form factor. What warranty does the 102AC carry? The 102AC is backed by a 5-year warranty from LED Autolamps — longer than the 1-year warranty on the 102A variant. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Black Chrome Round Indicator Lamp with Clear Lens and 5-Year Warranty Product Overview The LED Autolamps 102ABC is a round indicator lamp with a distinctive black chrome finish and clear lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. At 130mm in diameter and just 12mm deep, it delivers a sharp, premium aesthetic alongside reliable, road-legal indicator output. Surface bases are also available for installations that require surface mounting rather than recessed fitting, giving builders and auto electricians flexibility in how they install the lamp. ADR approved and rated IP67, the 102ABC is backed by a 5-year warranty. Features & Benefits Black chrome finish — premium aesthetic suits trailer and truck builds where appearance matters alongside performance Clear lens — clean, modern look with the indicator colour produced by the LEDs rather than a tinted lens Low-profile recessed mount — 12mm depth sits flush with the mounting panel for an integrated finish on trailer and truck bodies Surface bases available — for installations requiring surface mounting rather than recessed fitting; check with F.A.E. for compatible surface base accessories ADR Australian road approved — meets Australian Design Rules for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 102ABC Lamp Type Indicator Lens Colour Clear Housing Finish Black Chrome Diameter 130mm Depth 12mm Mounting Low-profile recessed (surface base available) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed indicator lamps Trailer builds requiring ADR-approved indicator lighting with a premium finish Compatible surface mount bases (available separately — confirm with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102ABC approved for road use in Australia? Yes. The LED Autolamps 102ABC is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. What mounting options are available for the 102ABC? The 102ABC is designed for low-profile recessed mounting. Surface bases are also available for surface mount installations — contact F.A.E. for compatible surface base options. What is the IP rating on the 102ABC? The 102ABC is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Why does the 102ABC use a clear lens instead of an amber lens? The clear lens gives the lamp a cleaner, more modern appearance. The amber indicator colour is produced directly by the LEDs behind the lens rather than relying on a tinted lens cover. What warranty does the 102ABC carry? The 102ABC is backed by a 5-year warranty from LED Autolamps, significantly longer than the standard 1-year warranty on earlier 102 series variants. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Smart App, IR Receiver & Remote Control For Effortless Control! 5M Smart LED Strip LightingEnhance your space with the Aerpro APLED5W. This advanced lighting solution features a Smart App, IR receiver, and remote control for effortless control. With voice control capabilities, you can easily adjust the lighting settings to your preference. Choose from a wide range of colors and effects to create the perfect ambiance. The dimmable brightness allows for customizable lighting intensity. The 5M length can be trimmed to fit any space, and the IP65 water-resistant rating ensures durability. Easy installation is ensured with the flexible design and self-adhesive backing. Powered by a 240V AC supply, this Aerpro APLED5W 5M Smart LED Strip Lighting offers convenience and versatility. SAFETY WARNING: This product contains Button/Coin Cell Batteries. Keep batteries out of reach of children. If you suspect a battery has been swallowed or placed inside any part of the body seek medical attention immediately as batteries can cause severe or fatal injuries in 2 hours or less. Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

LED Autolamps 101BAR2 12V Stop Tail Indicator Lamp with Reflector Twin Blister Pack A twin blister pack of budget 12V LED stop, tail, indicator, and reflector trailer lamps with IP67 rating and ECE road approval, the LED Autolamps 101BAR2 features 8 LEDs per lamp, a low-profile 100 x 100 x 22mm surface mount black housing, and a 40cm pre-wired cable, backed by a 5-year warranty. Product Overview The LED Autolamps 101BAR2 is the twin blister pack version of the 101BAR budget LED stop, tail, indicator, and reflector lamp designed for 12V trailer applications. Each lamp in the twin pack is identical to the 101BAR, measuring 100 x 100 x 22mm in a low-profile black housing with surface mount installation. Eight LEDs provide stop, tail, and indicator illumination alongside an integrated reflector. Current draw is 0.13A for stop, 0.04A for tail, and 0.12A for indicator at 13.8V. A 40cm pre-wired cable is included on each lamp. IP67 rated for waterproof and dustproof protection. ECE road approved with individual compliance numbers for stop/tail, indicator, and reflector functions. Supplied as a twin blister pack for complete left and right trailer lamp replacement or new installation. Features & Benefits Twin Pack for Complete Trailer Lamp Installation: The 101BAR2 is supplied as a twin blister pack, providing both left and right lamps in a single purchase for a complete trailer rear lamp installation or replacement. Budget Trailer Lamp with Stop, Tail, Indicator, and Reflector Functions: Each lamp combines stop, tail, indicator, and reflector functions in a single low-profile unit, reducing the number of individual lamp assemblies required on budget trailer builds and replacements. ECE Road Approved: Each lamp holds ECE road approval for stop/tail (S1-E9-02), indicator (2a-E9-01), and reflector (1A-E9-02) functions, confirming suitability for on-road trailer use. IP67 Waterproof and Dustproof Rating: The IP67 rating provides full dust protection and waterproof protection against temporary immersion, suited to exposed trailer mounting locations in all weather conditions. Low-Profile Black Housing: The low-profile 22mm depth black housing minimises protrusion from the trailer body surface, providing a compact and practical installation solution for budget trailers and caravans. 8 LEDs per Lamp: Eight LEDs per lamp provide the illumination required for stop, tail, and indicator functions, delivering reliable visibility for following traffic on road and in trailer applications. 40cm Pre-Wired Cable per Lamp: Each lamp is supplied with a 40cm pre-wired cable for direct connection to the trailer wiring harness. 12V Only: The 101BAR2 is designed for 12V DC trailer and vehicle electrical systems only. 5-Year Warranty: The 101BAR2 is backed by a 5-year LED Autolamps warranty. Technical Specs Specification Detail SKU 101BAR2 Brand LED Autolamps Function Stop, Tail, Indicator, Reflector Light Type LED LED Quantity 8 per Lamp Input Voltage 12V DC Current Draw - Stop 0.13A at 13.8V Current Draw - Tail 0.04A at 13.8V Current Draw - Indicator 0.12A at 13.8V Dimensions 100mm x 100mm x 22mm Housing Colour Black Mount Surface Mount Cable Length 40cm per Lamp IP Rating IP67 ECE Stop/Tail Approval S1-E9-02 ECE Indicator Approval 2a-E9-01 ECE Reflector Approval 1A-E9-02 Pack Quantity 2 Lamps Packaging Twin Blister Weight per Lamp 0.16kg Warranty 5 Years Compatible With The 101BAR2 is compatible with 12V DC trailer and vehicle electrical systems only. ECE road approved for on-road trailer use. Confirm mounting dimensions and wiring requirements for your specific trailer before purchase. The single bulk boxed version is available as the 101BAR. Frequently Asked Questions How many lamps are included in the 101BAR2 pack? The 101BAR2 is a twin blister pack containing two lamps, providing both left and right lamps for a complete trailer rear lamp installation or replacement in a single purchase. What is the difference between the 101BAR2 and the 101BAR? Both are the same lamp with identical specifications. The 101BAR2 is supplied as a twin blister pack for retail display, while the 101BAR is supplied individually in bulk boxed packaging. Is the 101BAR2 compatible with 24V systems? No. The 101BAR2 is designed for 12V DC systems only. Confirm your trailer's operating voltage before purchase. Is the 101BAR2 ECE approved for on-road use? Yes. Each lamp in the 101BAR2 pack holds ECE road approval for stop/tail (S1-E9-02), indicator (2a-E9-01), and reflector (1A-E9-02) functions, confirming suitability for on-road trailer use. Does the 101BAR2 include an integrated reflector? Yes. Each lamp includes an integrated reflector function alongside stop, tail, and indicator functions, with ECE reflector approval (1A-E9-02).Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 101BAR 12V Stop Tail Indicator Lamp with Reflector A budget 12V LED stop, tail, indicator, and reflector trailer lamp with IP67 rating and ECE road approval, the LED Autolamps 101BAR features 8 LEDs, a low-profile 100 x 100 x 22mm surface mount design, and a 40cm pre-wired cable, backed by a 5-year warranty. Product Overview The LED Autolamps 101BAR is a budget LED stop, tail, indicator, and reflector lamp designed for 12V trailer applications. The low-profile unit measures 100 x 100 x 22mm and is surface mounted via the lamp body. Eight LEDs provide stop, tail, and indicator illumination alongside an integrated reflector. Current draw is 0.13A for stop, 0.04A for tail, and 0.12A for indicator at 13.8V. A 40cm pre-wired cable is included for connection to the trailer wiring harness. IP67 rated for waterproof and dustproof protection. ECE road approved with individual compliance numbers for stop/tail, indicator, and reflector functions, and CTA approved. The 101BAR is supplied in bulk boxed packaging and backed by a 5-year warranty. A twin blister pack version is available as the 101BAR2. Features & Benefits Budget Trailer Lamp with Stop, Tail, Indicator, and Reflector Functions: The 101BAR combines stop, tail, indicator, and reflector functions in a single low-profile unit, reducing the number of individual lamp assemblies required on budget trailer builds and replacements. ECE Road Approved: The 101BAR holds ECE road approval with individual compliance numbers for stop/tail (R1-S1-E9-02.6444), indicator (2a-E9-01.6444), and reflector (1A-E9-02.6444) functions, along with CTA approval (CTA-060139), confirming suitability for on-road trailer use. IP67 Waterproof and Dustproof Rating: The IP67 rating provides full dust protection and waterproof protection against temporary immersion, suited to exposed trailer mounting locations in all weather conditions. Low-Profile Design: The low-profile 22mm depth minimises protrusion from the trailer body surface, providing a compact and practical installation solution for budget trailers and caravans. 8 LEDs for Stop, Tail, and Indicator Functions: Eight LEDs provide the illumination required for stop, tail, and indicator functions, delivering reliable visibility for following traffic on road and in trailer applications. 40cm Pre-Wired Cable: The 40cm pre-wired cable allows direct connection to the trailer wiring harness without requiring additional cable extension in most standard trailer wiring configurations. 12V Only: The 101BAR is designed for 12V DC trailer and vehicle electrical systems only. 5-Year Warranty: The 101BAR is backed by a 5-year LED Autolamps warranty. Technical Specs Specification Detail SKU 101BAR Brand LED Autolamps Function Stop, Tail, Indicator, Reflector Light Type LED LED Quantity 8 Input Voltage 12V DC Current Draw - Stop 0.13A at 13.8V Current Draw - Tail 0.04A at 13.8V Current Draw - Indicator 0.12A at 13.8V Dimensions 100mm x 100mm x 22mm Mount Surface Mount Cable Length 40cm IP Rating IP67 ECE Stop/Tail Approval R1-S1-E9-02.6444 ECE Indicator Approval 2a-E9-01.6444 ECE Reflector Approval 1A-E9-02.6444 CTA Approval CTA-060139 Packaging Bulk Boxed Weight 0.16kg Warranty 5 Years Compatible With The 101BAR is compatible with 12V DC trailer and vehicle electrical systems only. ECE and CTA road approved for on-road trailer use in Australia. Confirm mounting dimensions and wiring requirements for your specific trailer before purchase. A twin blister pack version is available as the 101BAR2. Frequently Asked Questions Is the 101BAR ADR or ECE approved for on-road use? The 101BAR holds ECE road approval with individual compliance numbers for stop/tail (R1-S1-E9-02.6444), indicator (2a-E9-01.6444), and reflector (1A-E9-02.6444) functions, along with CTA approval (CTA-060139), confirming suitability for on-road trailer use in Australia. Is the 101BAR compatible with 24V systems? No. The 101BAR is designed for 12V DC systems only. Confirm your trailer's operating voltage before purchase. What is the difference between the 101BAR and the 101BAR2? Both are the same lamp. The 101BAR is supplied in bulk boxed packaging, while the 101BAR2 is supplied in a twin blister pack for retail display. The lamp specifications are identical. How long is the pre-wired cable on the 101BAR? The 101BAR is supplied with a 40cm pre-wired cable for connection to the trailer wiring harness. Does the 101BAR include a reflector? Yes. The 101BAR includes an integrated reflector function alongside stop, tail, and indicator functions, with ECE reflector approval (1A-E9-02.6444).Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 10121/12SW 12V LED Interior Strip Light with On/Off Switch A 12V slimline LED interior strip light delivering 670 lumens from 121 SMD LEDs with a 120-degree spread, integrated on/off switch, and clear lens, the LED Autolamps 10121/12SW is designed for interior lighting in caravans, trailers, campervans, and vehicles, mounted via two screws and backed by a 3-year warranty. Product Overview The LED Autolamps 10121/12SW is a 12V LED interior strip light in a low-profile slimline design, suitable for interior lighting in caravans, trailers, campervans, and vehicles. It delivers 670 lumens of clear light output from 121 SMD LEDs across a 120-degree spread angle for wide and even illumination coverage. The integrated on/off switch provides direct control of the light without requiring a separate switch installation. A 10cm pre-wired cable is provided. Current draw is 0.58A at 13.8V. The 10121/12SW is mounted via two screws and is backed by a 3-year LED Autolamps warranty. Supplied in single blister packaging. Features & Benefits 670 Lumens from 121 SMD LEDs: The 10121/12SW delivers 670 lumens of clear light output from 121 SMD LEDs, providing strong and even interior illumination suited to caravan, campervan, and vehicle cabin applications. 120-Degree Spread Angle: The 120-degree spread angle provides wide and even illumination coverage across the interior space without hotspots or dark areas. Clear Lens: The clear lens maximises light transmission from the SMD LEDs for maximum lumen output at the installation surface. Integrated On/Off Switch: The built-in on/off switch provides direct control of the strip light without requiring a separate switch to be wired into the installation, simplifying the wiring and reducing the number of components required. Low-Profile Slimline Design: The low-profile slimline chassis minimises protrusion from the mounting surface, providing a clean and unobtrusive appearance suited to caravan, campervan, and vehicle interior installations. 12V DC Operation with 10cm Pre-Wired Cable: The 10121/12SW operates on 12V DC at 0.58A at 13.8V, compatible with standard caravan, trailer, campervan, and vehicle 12V electrical systems. A 10cm pre-wired cable is included for connection to the vehicle or installation wiring. 2-Screw Surface Mount: The 10121/12SW is secured via two screws, providing a straightforward surface mount installation to ceiling panels, walls, and other interior surfaces. 3-Year Warranty: The 10121/12SW is backed by a 3-year LED Autolamps warranty. Technical Specs Specification Detail SKU 10121/12SW Brand LED Autolamps Light Style Interior Strip Light Light Type LED Lens Clear Lumen Output 670lm LED Quantity 121 SMD Input Voltage 12V DC Current Draw 0.58A at 13.8V Spread Angle 120 Degrees Switch On/Off (Integrated) Cable Length 10cm Mount 2-Screw Surface Mount Design Low-Profile Slimline Packaging Single Blister Warranty 3 Years Compatible With The 10121/12SW is compatible with 12V DC caravan, trailer, campervan, and vehicle electrical systems. Confirm mounting dimensions and wiring requirements for your specific installation before purchase. Frequently Asked Questions Does the 10121/12SW have an integrated on/off switch? Yes. The 10121/12SW includes a built-in on/off switch, allowing direct control of the strip light without requiring a separate switch installation. What is the lumen output of the 10121/12SW? The 10121/12SW delivers 670 lumens from 121 SMD LEDs through a clear lens with a 120-degree spread angle. How is the 10121/12SW mounted? The 10121/12SW is secured via two screws to ceiling panels, walls, or other interior surfaces. What is the current draw of the 10121/12SW? The 10121/12SW draws 0.58A at 13.8V on a 12V DC system. What is the warranty period for the 10121/12SW? The 10121/12SW is backed by a 3-year LED Autolamps warranty.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Interior Strip Light 121 SMD LEDs, 6500K Cool White, 600mm, IP67. Product Overview The LED Autolamps 10121/24 is a 24V slimline interior LED strip lamp designed for use in trucks, buses, vans, trailers, and 24V commercial vehicle applications. At 600mm long with a slim 25mm width and just 10mm deep, this lamp packs 121 SMD LEDs into a low-profile strip format delivering high-brightness cool white illumination across a 120-degree spread for effective interior coverage. The 6500K cool white colour temperature produces a crisp, bright daylight-style output suited to driver cabs, storage areas, and general interior lighting in 24V commercial vehicles. Note that this is the direct-feed version without an inbuilt switch a switched circuit or separate switch is required for on/off control. IP67 rated for both interior and exterior use, the 10121/24 is a reliable, long-lasting 24V interior lighting solution backed by a 3-year warranty. For the switch version, refer to the 10121/24SW. Key Specifications LED count: 121 SMD LEDs Colour temperature: 6500K (cool white) Light spread: 120-degree Dimensions: 600mm x 25mm x 10mm Switch: Not included direct feed (switched circuit required) Mount type: Surface mount remove end bezels, screw fix IP rating: IP67 (interior or exterior use) Input voltage: 24V only Current draw: Approx. 0.31A @ 28V Warranty: 3 years Brand: LED Autolamps SKU: 10121/24 Features & Benefits 121 SMD LEDs: High LED count in a 600mm strip delivers impressive high-brightness cool white illumination for effective interior coverage across driver cabs, cargo areas, and utility vehicle interiors 6500K cool white: Crisp daylight-style colour temperature ideal for task lighting, driver cab illumination, and general interior lighting in 24V commercial vehicles 120-degree light spread: Wide angle illumination provides broad, even coverage across the interior area below the lamp Ultra-slim 10mm profile: At just 10mm deep, the 10121/24 installs flush against headliners, walls, and surfaces without protruding into usable space IP67 rated: Suitable for both interior and exterior use fully protected against dust ingress and temporary water immersion Surface mount with end bezels: End bezels remove for concealed screw mounting, then refit for a clean, finished appearance with no visible fasteners 24V only: Designed for 24V commercial vehicle electrical systems including trucks, buses, trailers, and refrigerated van bodies Low current draw: Approximately 0.31A at 28V, placing minimal load on the vehicle's 24V electrical system 3-year warranty: Backed by LED Autolamps' 3-year product warranty Technical Specs Specification Detail SKU 10121/24 Brand LED Autolamps LED Count 121 SMD LEDs Colour Temperature 6500K (cool white) Light Spread 120-degree Dimensions 600mm x 25mm x 10mm Switch Not included direct feed Mount Type Surface mount end bezel removal, screw fix IP Rating IP67 Input Voltage 24V only Current Draw Approx. 0.31A @ 28V Warranty 3 Years Compatible With Universal suits all 24V commercial vehicles and applications requiring interior or exterior strip lighting including: Truck and bus driver cabs and sleeper compartments Refrigerated trailer and van body interiors Commercial van and utility vehicle interiors 24V marine and boat interior lighting Toolboxes, canopies, and storage areas on 24V vehicles Related Products: LED Autolamps 10121/24SW same lamp with inbuilt push button switch (24V) LED Autolamps 10121/12 same lamp in 12V version (without switch) LED Autolamps 10121/12SW same lamp in 12V version with switch Frequently Asked Questions Does this lamp include a switch? No the 10121/24 is the direct-feed version without an inbuilt switch. A switched circuit or external switch must be provided for on/off control. For the version with an inbuilt push button switch, refer to the LED Autolamps 10121/24SW. What colour temperature is this lamp? The 10121/24 is 6500K a cool white, daylight-style colour temperature that produces a bright, crisp light output suited to task and driver cab lighting in 24V commercial vehicles. Is this lamp compatible with 12V vehicles? No the 10121/24 is 24V only. For 12V applications, refer to the LED Autolamps 10121/12 (without switch) or 10121/12SW (with switch). Is this lamp suitable for exterior use? Yes the IP67 rating makes the 10121/24 suitable for both interior and exterior applications, including installation in areas exposed to rain, moisture, or wash-down conditions. How is this lamp mounted? Remove the end bezels, surface mount using two screw points through the exposed mounting holes, run wires through the mounting surface, then refit the bezels for a clean finished appearance. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 25 LED Square Reversing Lamp with Clip-In Lens Bracket and 30cm Wire Included Product Overview The LED Autolamps 100WM is a 12/24V square reversing lamp fitted with 25 white LEDs, supplied with a surface mount bracket and 30cm pre-wired lead. Part of the proven 100 series, it shares the same form factor as the 100AM indicator and 100RM stop/tail lamps for a fully matched square rear lighting set. The clip-in replaceable lens allows for quick lens swaps without replacing the full housing, and the modular mounting system integrates cleanly with other 100 series lamps. ADR approved under CRN35793 and rated IP67, backed by a 5-year warranty. Features & Benefits 25 white LEDs — delivers bright, clear white reverse output for strong visibility when reversing Original square series design — matches the 100AM and 100RM in form factor for a uniform full-function rear lighting set Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and minimising downtime ADR road approved — certified under CRN35793 for legal on-road use as a reversing lamp in Australia IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Bracket and 30cm pre-wired lead included — ready to mount and connect straight out of the pack Modular mount — integrates with the 100 series modular mounting system 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 100WM Lamp Type Reversing LED Quantity 25 white Voltage Range 12V / 24V Cable Length 300mm Mounting Modular surface mount (bracket included) Lens Clip-in replaceable Protection Rating IP67 Compliance ADR — CRN35793 Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and tray body applications requiring a square reversing lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved reversing lighting LED Autolamps 100AM indicator lamp (same 100 series form factor) LED Autolamps 100RM stop/tail lamp (same 100 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 100WM approved for road use in Australia? Yes. The 100WM is ADR approved under CRN35793, meeting Australian Design Rules requirements for legal on-road use as a reversing lamp. How does the 100WM fit with other 100 series lamps? The 100WM shares the same square form factor as the 100AM indicator and 100RM stop/tail lamps, completing the 100 series for a fully matched rear lighting set across all three functions. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing and can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field. What is the IP rating on the 100WM? The 100WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 100WM carry? The 100WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 123 LED Rear Combination Assembly with Individual Lens Replacement and 5-Year Warranty Product Overview The LED Autolamps 100BARWM is a 12/24V rear combination lamp assembly packing 123 LEDs across stop, tail, indicator, and reverse functions in a single surface-mount unit. At 350mm x 120mm x 31mm with a 290mm centre-to-centre mount, it's built for trailers, trucks, and tray bodies that need a full-function rear lighting solution in a clean, low-profile bar format. Individual lens replacements are available, meaning each lens section can be swapped out independently without replacing the entire assembly a practical advantage for minimising downtime and replacement costs in the field. Pre-wired with a black housing, ADR approved via CTA060221, and rated IP67, the 100BARWM is backed by a 5-year warranty and engineered for reliable long-term service. Features & Benefits 123 LEDs across four functions — high LED count delivers strong, consistent output across stop, tail, indicator, and reverse for maximum rear visibility Individual lens replacements — each lens section can be replaced independently, reducing maintenance costs and avoiding full assembly replacement for a single damaged lens ADR approved — manufacturer approval CTA060221; stop/tail CRN33402, indicator CRN33156 — compliant for road-legal use across Australia IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 350mm x 120mm bar format — wide, low-profile assembly suits the rear panels of trailers, tray bodies, and trucks Pre-wired, surface mount — 290mm centre-to-centre spacing; ready to connect and mount straight out of the pack Black housing — professional finish suits a wide range of trailer and truck body aesthetics 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 100BARWM Lamp Type Stop / Tail / Indicator / Reverse LED Quantity 123 Voltage Range 12V – 24V Dimensions 350mm x 120mm x 31mm Mount Centre-to-Centre 290mm Stop Current Draw 0.38A @ 13.8V Tail Current Draw 0.04A @ 13.8V Indicator Current Draw 0.38A @ 13.8V Mounting Surface mount Connector Pre-wired Housing Colour Black Protection Rating IP67 Stop/Tail Compliance ADR — CRN33402 Indicator Compliance ADR — CRN33156 Manufacturer Approval ADR — CTA060221 Warranty 5 years Weight 0.72 kg Compatible With / Goes Well With Trailers, tray bodies, trucks, and light commercial vehicles 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved full-function rear combination lighting LED Autolamps individual replacement lenses for the 100 series LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What functions does the 100BARWM cover? It combines stop, tail, indicator, and reverse into a single assembly, providing a complete rear lighting solution for trailers, trucks, and tray bodies. What does individual lens replacement mean for maintenance? Each lens section in the assembly can be replaced independently rather than replacing the entire unit — reducing costs and minimising downtime when a single lens is cracked or damaged. What ADR approvals does the 100BARWM carry? It holds manufacturer approval CTA060221, with stop/tail certified under CRN33402 and indicator under CRN33156, covering compliance for road-legal use in Australia. What is the IP rating on the 100BARWM? The 100BARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Does the 100BARWM work on both 12V and 24V systems? Yes. It operates across 12V to 24V, making it compatible with light vehicles as well as 24V heavy transport applications without any modification. Weight 0.72 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less