ECE Approved Medium Jumbo Stop/Tail/Indicator/Reverse Lamp with Reflex Reflectors 460x130mm, IP67 Product Overview The LED Autolamps 460ARWM is a 12/24V Medium Jumbo rear combination lamp covering stop, tail, indicator, and reverse functions with inbuilt reflex reflectors in a 460mm x 130mm x 33mm ABS base housing with acrylic lens. The 280mm centre-to-centre mount suits larger trailer and truck body rear panel configurations where the standard 275-283mm series lamps are too short. ECE road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Medium Jumbo 460mm form factor — wider than the standard 280-283mm range; suited to larger trailer bodies and truck rear panels Stop, tail, indicator, reverse, and inbuilt reflectors — five functions in a single surface-mount unit Inbuilt reflex reflectors — integrated passive reflective elements for additional rear visibility and compliance Acrylic lens — good optical clarity and UV resistance for outdoor transport applications ABS base — lightweight, impact-resistant thermoplastic housing 280mm centre-to-centre mount — confirm against your panel before installation ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460ARWM Series Medium Jumbo Lamp Type Stop / Tail / Indicator / Reverse / Reflector Voltage Range 12V / 24V Dimensions 460mm x 130mm x 33mm Mount Centre-to-Centre 280mm Lens Material Acrylic Base Material ABS Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Larger trailers, trucks, and commercial vehicles requiring a wide-format rear combination lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE-approved rear combination lighting LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 460ARWM approved for road use in Australia? Yes. The 460ARWM is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia across all five functions. What is the Medium Jumbo classification? Medium Jumbo refers to the 460mm length — a wider format than the standard 280-283mm Mini Jumbo series, suited to larger trailer bodies and truck rear panels where a longer lamp is required for proportional rear lighting coverage. What is the difference between acrylic and polycarbonate lens materials? Acrylic (PMMA) offers good optical clarity and UV resistance. Polycarbonate is generally more impact-resistant but can yellow with UV exposure over time without UV coating. Both are common in trailer lamp lenses — acrylic suits applications where optical clarity is prioritised. What is the IP rating on the 460ARWM? The 460ARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 460ARWM carry? The 460ARWM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Medium Jumbo Stop/Tail/Indicator Lamp with Inbuilt Reflectors 460x130mm, IP67 Product Overview The LED Autolamps 460ARRM is a 12/24V Medium Jumbo rear combination lamp covering stop, tail, and indicator functions with inbuilt reflex reflectors in the same 460mm x 130mm x 33mm form factor as the 460ARWM. The three-function variant without reverse suited to trailer and truck applications where a separate reverse lamp is preferred or already fitted. ECE road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Medium Jumbo 460mm form factor — wider than the standard 280-283mm range; suited to larger trailer bodies and truck rear panels Stop, tail, indicator, and inbuilt reflectors — four functions in a single surface-mount unit Inbuilt reflex reflectors — integrated passive reflective elements for additional rear visibility and compliance ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460ARRM Series Medium Jumbo Lamp Type Stop / Tail / Indicator / Reflector Voltage Range 12V / 24V Dimensions 460mm x 130mm x 33mm Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Larger trailers, trucks, and commercial vehicles requiring a wide-format stop/tail/indicator lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE-approved rear combination lighting LED Autolamps 460ARWM (same form factor with reverse function) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 460ARRM approved for road use in Australia? Yes. The 460ARRM is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. How does the 460ARRM differ from the 460ARWM? The 460ARWM adds reverse function to the same 460mm x 130mm x 33mm Medium Jumbo form factor. The 460ARRM covers stop, tail, indicator, and reflectors only — suited to installations where a separate reverse lamp is already fitted or preferred. What is the Medium Jumbo classification? Medium Jumbo refers to the 460mm length — a wider format than the standard 280-283mm Mini Jumbo series, suited to larger trailer bodies and truck rear panels requiring proportionally sized rear lighting. What is the IP rating on the 460ARRM? The 460ARRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 460ARRM carry? The 460ARRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR-Approved White LED Front Position Marker Classic Truck Style, Chrome Bracket, Clip-In Lens. Product Overview The LED Autolamps 42WM is a white LED front position marker lamp in the classic truck style, featuring a chrome bracket, polycarbonate clip-in clear lens, and internal white LEDs. Measuring 74mm x 38mm x 35mm, the 42WM shares the same proven 42 series form factor as the amber 42AM and red 42RM making it the front-position white companion in a consistent, matched 42 series lamp installation across trailer and truck builds. ADR approved (CTA-042840) and IP67 rated for complete weatherproof protection, the 42WM operates on both 12V and 24V systems. The surface mount chrome bracket secures horizontally to the mounting surface, with the white lens clipping in cleanly for a finished, professional result. Supplied individually in blister packaging and backed by LED Autolamps' 5-year warranty. Key Specifications Function: Front position / end outline marker lamp (white) LED colour: White Housing/bracket colour: Chrome Lens: Clear polycarbonate clip-in Dimensions: 74mm x 38mm x 35mm Mount type: Surface mount horizontal screw bracket with clip-in lamp IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR approved CTA-042840 Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 42WM Features & Benefits White LED front position marker: Confirmed for front end outline and position marker applications where a white ADR-compliant lamp is required at the front of the vehicle or trailer ADR approved CTA-042840: Fully compliant with Australian Design Rules for legal use as a white front position/end outline marker on Australian road vehicles and trailers Classic truck style: The 42 series form factor is one of the most widely recognised lamp profiles on Australian trucks and trailers, providing a consistent, professional appearance across the full 42 series range Chrome bracket: Chrome bracket finish suits traditional trailer and truck builds; the black bracket alternative (42WMB) is available for those preferring a darker aesthetic Polycarbonate clip-in lens: Replaceable clip-in lens allows lens swap without removing the bracket from the mounting surface Clear lens with internal white LEDs: Maintains colour accuracy and brightness without UV-related lens discolouration over time 12V and 24V compatible: Multivolt operation suits passenger and caravan trailer applications through to 24V commercial trucks IP67 weatherproof: Completely protected against dust ingress and temporary water immersion for reliable outdoor performance year-round 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 42WM Brand LED Autolamps Function Front Position / End Outline Marker (White) LED Colour White Housing/Bracket Colour Chrome Lens Clear polycarbonate clip-in Dimensions 74mm x 38mm x 35mm Mount Type Surface mount horizontal screw bracket, clip-in lamp IP Rating IP67 Input Voltage 12–24V DC (multivolt) ADR Compliance CTA-042840 Warranty 5 Years Packaging Blister Pack single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR-compliant white front position or end outline marker lamps including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Pairs well with: LED Autolamps MAXILAMPC3XR or MAXILAMPC3XRWB combination lamps LED Autolamps 42RM red rear marker LED Autolamps 42AM amber side direction indicator LED Autolamps 35CARM red/amber side marker Frequently Asked Questions What is this lamp used for? The 42WM is a white LED front position and end outline marker lamp, used to mark the front extremities of a vehicle or trailer with white light in accordance with ADR requirements. What is the difference between the 42WM and the 42WMB? The 42WM has a chrome bracket while the 42WMB has a black bracket. Both are otherwise identical in function, dimensions, and specifications. Choose based on your preferred bracket finish. Is this lamp ADR approved for Australian road use? Yes the 42WM is ADR approved under CTA-042840, confirming it meets Australian legal requirements for white front position/end outline marker use on trailers and commercial vehicles. Can the lens be replaced without removing the bracket? Yes the clip-in lens design allows lens replacement without removing the bracket from the mounting surface, making maintenance on installed units straightforward. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm your vehicle or trailer's mounting requirements before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SPXULEDB Blue CREE LED Underbody / Rock Light Set with IP68 Aluminium Housing Bright blue CREE LED rock lights in a die-cast aluminium IP68-rated housing purpose-built for off-road underbody, wheel well, and engine bay lighting on ATVs, 4x4s, trucks, and Jeeps. Product Overview The Stinger SPXULEDB is a blue LED underbody and rock light set from the Stinger Powersports range. Each kit includes two 9W CREE LED pods housed in black die-cast aluminium with an IP68 waterproof and dustproof rating, making them suitable for the harshest off-road conditions including mud, water crossings, and heavy dust exposure. The pods mount on both flat and tubular surfaces via included rubber mounting pads and hardware, with multiple cable routing options for clean installation. Beam angle is 120 degrees for broad area illumination. Operating on 12V only, these lights are designed for use on ATVs, UTVs, cars, trucks, Jeeps, and powersports vehicles. Please note: These lights are for off-road use only and are not road legal for on-road vehicle use in Australia. Features & Benefits CREE LED light source — bright, powerful output IP68 rated — fully waterproof and dustproof Black die-cast aluminium housing for durability in extreme environments 9W per pod, 120-degree beam angle for wide area coverage Mounts on flat or tubular surfaces — rubber mounting pads included Multiple cable routing options CE and RoHS certified 12V operation Off-road use only Technical Specs Specification Detail SKU / Part Number SPXULEDB Brand Stinger LED Colour Blue Light Source CREE LED (3x per pod) LED Power 9W per pod Beam Angle 120° IP Rating IP68 (Waterproof & Dustproof) Housing Material Black Die-Cast Aluminium DC Voltage 12V only Working Temperature -20°C to +40°C Dimensions (per pod) 70 x 35 x 10mm (2.75 x 1.37 x 0.40in) Certifications CE, RoHS Use Off-road use only What's in the Box 2x LED Pods, 2x Rubber Mounting Pads, 4x Mounting Hardware Compatible With / Goes Well With Direct Vehicle Fit: Universal — ATVs, UTVs, 4x4s, trucks, Jeeps, off-road vehicles, powersports vehicles Goes Well With: Stinger SPXULEDR (Red variant) and other SPXULED colour variants 12V wiring and switch accessories Off-road lighting wiring harnesses and relay switches Underbody and rock light mounting brackets Frequently Asked Questions Are these lights road legal in Australia? No. The SPXULEDB is for off-road use only and is not approved for use on public roads in Australia. They are intended for use on ATVs, UTVs, off-road 4x4s, and powersports vehicles in off-road environments. What does IP68 mean for these lights? IP68 is the highest standard of waterproof and dustproof protection. It means the housing is fully sealed against dust ingress and can withstand continuous submersion in water beyond 1 metre depth. For rock lights and underbody use, this means they can handle water crossings, heavy rain, and mud without issue. Can these be mounted on a roll cage or tubular frame? Yes. The SPXULEDB includes rubber mounting pads designed to accommodate both flat and tubular surfaces, making them suitable for mounting on roll cages, bull bars, and tubular off-road frames. Do these lights require a relay or switch harness? The kit includes the pods, mounting pads, and hardware only — a wiring harness, relay, and switch are not included. For a clean and safe installation, a dedicated relay-switched wiring harness is recommended to avoid drawing directly from the vehicle's existing circuits. Is a white or other colour version of this light available? The SPXULEDB is the blue variant. Contact the F.A.E. team to check availability of other colours in the Stinger SPXULED range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Stop/Tail/Indicator/Licence Plate Twin Pack with 8-Metre Cable Kit Fully Submersible Product Overview The LED Autolamps 209GARLP2/8M is the 209GARLP2 twin lamp pack supplied together with an 8-metre plug-in cable kit a convenient bundle for boat trailers, agricultural trailers, and longer builds where extended cable runs are required. The two rear combination lamps cover stop, tail, indicator, and licence plate functions in fully submersible housings, with all the wiring needed for a complete installation included. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Includes 8-metre plug-in cable kit — complete wiring solution bundled with the twin lamp pack; no additional cable kit to source separately Twin lamp pack — both lamps supplied for a complete left and right rear installation Integrated licence plate lamp — built-in number plate illumination in each lamp unit Fully submersible — engineered for full water submersion beyond standard IP67; suited to boat trailers and agricultural applications ADR approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 209GARLP2/8M Pack Contents 2 lamps + 8m plug-in cable kit Lamp Type Stop / Tail / Indicator / Licence Plate Voltage 12V Dimensions 200mm x 92mm x 28mm Mounting Surface mount Protection Rating IP67 (fully submersible) Compliance ADR Warranty 5 years Compatible With / Goes Well With Boat trailers, agricultural trailers, and equipment requiring fully submersible rear combination lighting with licence plate and long cable runs LED Autolamps 209GARLP2 (same lamps without the 8m cable kit) LED Autolamps 209GARL4P (same lamp functions, single unit) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What is included in the 209GARLP2/8M pack? The pack includes two fully submersible stop/tail/indicator/licence plate lamps and an 8-metre plug-in cable kit — everything needed for a complete installation on longer trailers. How does the 209GARLP2/8M differ from the 209GARLP2? The 209GARLP2/8M includes the 8-metre cable kit bundled with the twin lamps, while the 209GARLP2 is the twin lamp pack only. If you need the cable kit, the /8M bundle saves a separate purchase. What does fully submersible mean? The lamps are engineered for full water submersion beyond standard IP67 coverage — suited to boat trailer launching, agricultural wash-down, and environments where prolonged water exposure is expected. Is the 209GARLP2/8M compatible with 24V systems? No. This is a 12V-only lamp system and is not rated for 24V applications. What warranty does the 209GARLP2/8M carry? The 209GARLP2/8M is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V High-Output Interior LED Strip Lamp 40 LEDs, 948lm Effective, Touch Sensor, Aluminium Housing Product Overview The LED Autolamps 40770MCU is the high-output model in the 40 series interior strip lamp range, delivering 948 effective lumens from 40 SMD LEDs double the LED count of the 40410MCU. The cool white output, aluminium housing, and MCU-controlled touch sensor make it suited to larger interior spaces including motorhome living areas, large caravan interiors, truck sleeper berths, and commercial vehicle cabins requiring strong, even illumination. Drawing 1.4A at 13.8V, with a polycarbonate lens and surface mount design. Backed by a 3-year warranty. Features & Benefits 40 SMD LEDs producing 948 effective lumens — high output for larger interior spaces requiring strong, even illumination Cool white colour temperature — clear, functional light suited to working and living interior spaces Built-in MCU touch sensor switch — microcontroller-driven touch on/off control at the lamp body Aluminium housing — superior heat dissipation for long-term LED reliability, particularly at higher output levels Polycarbonate lens — impact-resistant with good optical clarity Low-profile slimline design — mounts flush to ceilings and panels 12V only — designed for 12V vehicle and caravan electrical systems 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 40770MCU Lamp Type Interior Strip Lamp LED Quantity 40 SMD Colour Temperature Cool White Raw Lumens 1,200 lm Effective Lumens 948 lm Current Draw 1.4A @ 13.8V Housing Material Aluminium Lens Material Polycarbonate Switch Built-in MCU touch sensor Voltage 12V Mounting Surface mount Warranty 3 years Compatible With / Goes Well With Motorhome living areas, large caravan interiors, truck sleeper berths, and commercial vehicle cabins 12V caravan, vehicle, and equipment electrical systems LED Autolamps 40410MCU interior strip lamp (same series, lower output — 20 LEDs, 474lm) LED Autolamps 40260MCU interior strip lamp (same series, shorter format) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions How does the 40770MCU compare to the 40410MCU? The 40770MCU has 40 LEDs producing 948 effective lumens at 1.4A, while the 40410MCU has 20 LEDs producing 474 effective lumens at 0.92A. The 40770MCU is suited to larger spaces requiring higher output; the 40410MCU suits smaller cabins and utility areas. What colour temperature does the 40770MCU produce? It produces cool white output — a crisp, functional light colour suited to working environments and interiors where brightness and clarity are priorities. What is the advantage of aluminium housing at this output level? At 1.4A and 1,200 raw lumens, the 40770MCU generates more heat than lower-output lamps. The aluminium housing dissipates this heat more effectively than plastic, protecting LED performance and extending service life. How does the MCU touch sensor work? The microcontroller processes touch input electronically for consistent, reliable on/off switching directly at the lamp body — no separate wall switch required. What warranty does the 40770MCU carry? The 40770MCU is backed by a 3-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AS2809 Compliant Front End Outline Marker Lamp with Female 2-Pin Plug RoHS, 5-Year Warranty Product Overview The LED Autolamps 181WMCSB is a front end outline marker lamp fitted with a female 2-pin plug, designed for heavy transport and livestock transport vehicles requiring AS2809-compliant wiring systems. Built with heavy-duty waterproof cable, plugs, and connectors, and supplied with plug covers, it meets the Australian Dangerous Goods cable system standard for regulated transport applications. RoHS compliant and backed by a 5-year warranty for general use (1-year warranty for livestock transport applications). Features & Benefits Female 2-pin plug — purpose-built connector for front end outline marker installations in AS2809-compliant vehicle wiring systems AS2809 Dangerous Goods compliant — cable and connector system meets Australian regulatory requirements for Dangerous Goods and livestock transport wiring Heavy-duty waterproof cable, plugs, and connectors — engineered for moisture resistance in outdoor and transport environments RoHS compliant — manufactured without restricted hazardous substances, suitable for modern vehicle and trailer builds Plug covers included — protect connectors from moisture, dust, and debris when disconnected 5-year warranty (1-year for livestock transport) — backed by LED Autolamps' warranty programme; the reduced 1-year term applies specifically to livestock transport applications Technical Specs Specification Detail SKU 181WMCSB Lamp Type Front End Outline Marker Connector Female 2-pin plug Plug Covers Included Compliance AS2809 (Dangerous Goods), RoHS Warranty 5 years (general); 1 year (livestock transport) Compatible With / Goes Well With Heavy transport, livestock transport, and Dangerous Goods vehicles requiring AS2809-compliant front outline marker lighting LED Autolamps AS2809-compliant wiring systems and cable assemblies Vehicles requiring ECE or ADR-approved outline marker lamps with compliant connector systems Frequently Asked Questions What is a front end outline marker lamp? A front end outline marker lamp is mounted at the outermost point of a vehicle's front end to indicate the vehicle's width and presence — required on heavy and wide-load transport vehicles operating on Australian roads. What does AS2809 compliance mean for this lamp? AS2809 is the Australian standard for Dangerous Goods transport vehicle electrical cabling and connectors. The 181WMCSB meets this standard, making it suitable for livestock transport and other regulated Dangerous Goods transport applications. What does the dual-warranty period mean? The 181WMCSB carries a 5-year warranty for general use. For livestock transport applications specifically, the warranty period is reduced to 1 year — confirm your application before purchase. Are plug covers included with the 181WMCSB? Yes. Plug covers are included to protect the female 2-pin plug from moisture, dust, and debris when the connector is not in use. Is the 181WMCSB RoHS compliant? Yes. The 181WMCSB is RoHS compliant, meaning it is manufactured without restricted hazardous substances. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Stop/Tail/Indicator/Licence Plate Lamp Twin Pack 18 Square LEDs, Fully Submersible Product Overview The LED Autolamps 207BARLP2 is a 12V rear combination lamp covering stop, tail, indicator, and licence plate functions, supplied as a twin blister pack. Fitted with 18 square LEDs in a black 200mm x 92mm x 28mm housing, it is specified as fully submersible exceeding standard IP67 waterproofing for applications where full water exposure is likely. Compatible with LED Autolamps' plug-in cable kit system and ADR road approved, backed by a 5-year warranty. The twin pack counterpart to the 207BARL4P. Features & Benefits Twin blister pack — both lamps supplied for a complete left and right rear installation in a single purchase 18 square LEDs — high LED count delivers strong stop, tail, and indicator output across the 200mm lamp face Integrated licence plate lamp — eliminates the need for a separate licence plate light, reducing components and simplifying wiring Fully submersible — engineered for applications where full water submersion may occur, beyond standard IP67 coverage Plug-in cable kit compatible — compatible with LED Autolamps' plug-in cable kit system for faster, cleaner installation ADR road approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water ingress Black housing — clean, professional finish suits a wide range of trailer and vehicle body aesthetics 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 207BARLP2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Licence Plate LED Configuration 18 square LEDs Voltage 12V Dimensions 200mm x 92mm x 28mm Housing Colour Black Mounting Surface mount Protection Rating IP67 (fully submersible) Compliance ADR Packaging Blister pack Warranty 5 years Weight 0.8 kg Compatible With / Goes Well With Trailers and light vehicles requiring a wide-format 12V rear combination lamp with integrated licence plate LED Autolamps plug-in cable kit system (confirm compatible cable kit with F.A.E.) Trailer builds requiring ADR-approved stop/tail/indicator/licence plate lighting LED Autolamps 207BARL4P (same form factor, single lamp, plug-in cable compatible) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What is included in the 207BARLP2 twin blister pack? The pack contains two lamps — providing a complete left and right rear installation in a single purchase. How does the 207BARLP2 differ from the 207BARL4P? The 207BARLP2 is supplied as a twin blister pack with 18 square LEDs, while the 207BARL4P is a single lamp with 14 square LEDs. Both share the same 200mm x 92mm x 28mm form factor and integrated licence plate lamp. What does fully submersible mean beyond IP67? IP67 covers water immersion up to 1 metre for 30 minutes. The 207BARLP2 is specified as fully submersible, making it suitable for boat trailers, agricultural equipment, and other applications where prolonged water exposure is likely. Is the 207BARLP2 compatible with 24V systems? No. The 207BARLP2 is a 12V-only lamp and is not rated for 24V applications. What warranty does the 207BARLP2 carry? The 207BARLP2 is backed by a 5-year warranty from LED Autolamps. Weight 0.8 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 48/00 Approved 12/24V Licence Plate Lamp Black Bracket, 40cm Wire, One Lamp for Compliance Product Overview The LED Autolamps 35BLM is a 12/24V LED licence plate lamp with a black bracket and 40cm pre-wired lead, measuring 76mm x 42mm x 30mm with a 64mm centre-to-centre mount. Like the 35CLM, only one lamp is required to meet ADR 48/00 compliance making it a simple, no-over-specification installation. The black bracket gives it a clean, practical appearance suited to a wide range of trailer and vehicle rear panel styles. Drawing just 0.02A at 13.8V, IP67 rated. Features & Benefits Black bracket — clean finish suits a wide range of trailer and vehicle rear panel aesthetics 40cm pre-wired cable — longer lead than the 30 series (0.14m) for more flexible routing to the number plate One lamp required for ADR compliance — a single 35BLM satisfies ADR 48/00 requirements White LED output — bright, clear white light for effective number plate illumination ADR 48/00 approved — meets Australian Design Rules for legal on-road use as a licence plate lamp IP67 rated — fully sealed against dust and water immersion Very low current draw — 0.02A at 13.8V 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 64mm centre-to-centre mount — confirm against your bracket before installation Technical Specs Specification Detail SKU 35BLM Lamp Type Licence Plate Light LED Colour White Voltage Range 12V – 24V Dimensions 76mm x 42mm x 30mm Mount Centre-to-Centre 64mm Current Draw 0.02A @ 13.8V Cable Length 0.4m Housing Colour Black Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 ADR Note One lamp required for compliance Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ADR 48/00 compliant licence plate illumination 12V light vehicles and 24V heavy transport applications LED Autolamps 35CLM (same single-lamp compliance concept, different bracket finish) LED Autolamps 30BLM (two-lamp compliance variant — smaller 65mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 35BLM lamps are required for ADR compliance? Only one lamp is required to meet ADR 48/00 compliance — a single 35BLM provides a fully compliant number plate light installation. How does the 35BLM differ from the 35CLM? The 35BLM has a black bracket and a 40cm cable, while the 35CLM's bracket colour was not confirmed. Both share the same single-lamp ADR compliance, 76mm x 42mm form factor, and 0.02A current draw What colour light does the 35BLM produce? The 35BLM produces white LED output for clear, effective number plate illumination. What is the IP rating on the 35BLM? The 35BLM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor trailer and vehicle mounting. What warranty does the 35BLM carry? Warranty information was not confirmed in available supplier data Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Mini Jumbo Stop/Tail/Indicator Lamp 282x95mm, 1.2m Cable, IP67, 5-Year Warranty Product Overview The LED Autolamps 280ARRM is a 12/24V Mini Jumbo rear combination lamp covering stop, tail, and indicator functions in a 282mm x 95mm x 28mm surface-mount unit. Fitted with 1.2m of pre-wired cable and a 116mm centre-to-centre mount, it carries individual ECE certifications for stop/tail (ECE R1-S1-02) and indicator (ECE 2A-E9-01) providing thorough road approval compliance for trailer and truck body applications. Drawing 0.3A on stop, 0.04A on tail, and 0.14A on indicator at 13.8V. Rated IP67 and backed by a 5-year warranty. Features & Benefits Mini Jumbo design — 282mm x 95mm form factor for a prominent, high-visibility rear lighting presence on trailers and truck bodies ECE approved across all functions — stop/tail ECE R1-S1-02, indicator ECE 2A-E9-01 1.2m pre-wired cable — long cable lead for flexible routing on larger trailers and truck bodies Stop, tail, and indicator in one lamp — three functions with individual ECE certifications 116mm centre-to-centre mount — confirm against your panel before installation IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 280ARRM Lamp Type Stop / Tail / Indicator Voltage Range 12V – 24V Dimensions 282mm x 95mm x 28mm Mount Centre-to-Centre 116mm Stop Current Draw 0.3A @ 13.8V Tail Current Draw 0.04A @ 13.8V Indicator Current Draw 0.14A @ 13.8V Cable Length 1.2m Mounting Surface mount Connector Pre-wired Protection Rating IP67 Stop/Tail Compliance ECE R1-S1-02 Indicator Compliance ECE 2A-E9-01 Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a prominent Mini Jumbo rear combination lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE-approved stop/tail/indicator lighting LED Autolamps 280ARWM (same 280 series, adds reverse function) LED Autolamps 280AM amber replacement lamp unit (same 280 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 280ARRM approved for road use in Australia? Yes. The 280ARRM carries individual ECE certifications for stop/tail (ECE R1-S1-02) and indicator (ECE 2A-E9-01), meeting international road approval standards accepted for legal on-road use in Australia. Why does the 280ARRM have a 1.2m cable? The 1.2m pre-wired cable gives a generous reach for routing to the trailer or truck body wiring connection, reducing the need for cable extensions on larger vehicles or longer trailers. What is the centre-to-centre mounting distance? The 280ARRM has a 116mm centre-to-centre mount spacing. Confirm this measurement against your panel or bracket before installation. What is the IP rating on the 280ARRM? The 280ARRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 280ARRM carry? The 280ARRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Stop/Tail/Indicator/Licence Plate Lamp 14 Square LEDs, Fully Submersible, IP67 Product Overview The LED Autolamps 207BARL4P is a 12V rear combination lamp covering stop, tail, indicator, and licence plate functions in a single 200mm x 92mm x 28mm surface-mount unit. Fitted with 14 square LEDs and specified as fully submersible, it goes beyond standard IP67 waterproofing suited to trailer and vehicle applications where full water submersion is a real possibility. The integrated licence plate lamp eliminates the need for a separate fitting. Compatible with LED Autolamps' plug-in cable kit system, and ADR road approved. Backed by a 5-year warranty. Features & Benefits Integrated licence plate lamp — eliminates the need for a separate licence plate light, reducing components and simplifying wiring 14 square LEDs — distinctive square LED array delivering stop, tail, and indicator output across the 200mm lamp face Fully submersible — exceeds standard IP67 requirements; engineered for applications where full water submersion may occur Plug-in cable kit compatible — compatible with LED Autolamps' plug-in cable kit system for cleaner, faster installation ADR road approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 207BARL4P Lamp Type Stop / Tail / Indicator / Licence Plate LED Configuration 14 square LEDs Voltage 12V Dimensions 200mm x 92mm x 28mm Mounting Surface mount Protection Rating IP67 (fully submersible) Compliance ADR Warranty 5 years Weight 0.4 kg Compatible With / Goes Well With Trailers and light vehicles requiring a wide-format 12V rear combination lamp with integrated licence plate LED Autolamps plug-in cable kit system (confirm compatible cable kit with F.A.E.) Trailer builds requiring ADR-approved stop/tail/indicator/licence plate lighting LED Autolamps 149BARLP2 (same licence plate integration concept, different form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 207BARL4P approved for road use in Australia? Yes. The LED Autolamps 207BARL4P is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across all four functions. What does fully submersible mean beyond IP67? IP67 covers water immersion up to 1 metre for 30 minutes. The 207BARL4P is specified as fully submersible, indicating it is engineered to handle more demanding water exposure — suited to boat trailers, agricultural equipment, and other applications where submersion is likely. What is the integrated licence plate lamp? The 207BARL4P has a licence plate light built into the lamp housing, illuminating the rear number plate without requiring a separate lamp fitting or additional wiring. What is the plug-in cable kit? The 207BARL4P is compatible with LED Autolamps' plug-in cable kit system, which allows the lamp to connect to the trailer wiring without cutting or splicing. Contact F.A.E. to confirm the compatible cable kit part number. Is the 207BARL4P compatible with 24V systems? No. The 207BARL4P is a 12V-only lamp and is not rated for 24V applications. Weight 0.4 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less