ADR Approved 12/24V Front Outline Position Marker 2 White LEDs, Clip-In Lens, IP67 Product Overview The LED Autolamps 58WM is a 12/24V front outline position marker lamp with 2 white LEDs and a clear clip-in replaceable lens, measuring 58mm x 35mm x 21mm in a black housing with a 28mm centre-to-centre mount. Completing the 58 series alongside the 58AM and 58ARM, it is the front position marker counterpart for trailer and truck body end-of-vehicle marking. Approved under CRN36842, pre-wired, IP67 rated, and backed by a 5-year warranty. Features & Benefits 2 white LEDs — clean, bright front position marker output through a clear clip-in lens Clear clip-in replaceable lens — lens swaps independently without removing the full housing from the panel Compact 58mm x 35mm form factor — matches the 58AM and 58ARM for a consistent marker lamp appearance across the vehicle ADR approved — certified under CRN36842 for legal on-road use as a front outline position marker Very low current draw — 0.05A at 13.8V IP67 rated — fully sealed against dust and water immersion Pre-wired — ready to connect on installation 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 58WM Lamp Type Front Outline Position Marker LED Quantity 2 LED Colour White Lens Colour Clear Housing Colour Black Voltage Range 12V / 24V Dimensions 58mm x 35mm x 21mm Mount Centre-to-Centre 28mm Current Draw 0.05A @ 13.8V Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR — CRN36842 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring front outline position marker lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 58AM side direction indicator (same 58mm x 35mm form factor) LED Autolamps 58ARM red/amber side marker (same form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 58WM approved for road use in Australia? Yes. The 58WM is ADR approved under CRN36842, meeting Australian Design Rules requirements for legal on-road use as a front outline position marker lamp. How does the 58WM complete the 58 series? The 58WM is the front position marker in the 58 series, joining the 58AM (side indicator) and 58ARM (red/amber side marker) — all sharing the same 58mm x 35mm x 21mm black housing, clip-in lens, and 28mm mount spacing for a consistent appearance across all marker positions. What does the clear lens mean for output colour? The clear lens allows the white LED output to show without colour filtering — providing a clean, bright appearance both when active and when inactive. What is the IP rating on the 58WM? The 58WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 58WM carry? The 58WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Compact ADR-Approved Rear Position Marker with Replaceable Lens Reliable, Low-Profile, and Budget-Smart. Product Overview The LED Autolamps 58RM is a compact rear position marker from the LED Autolamps budget range, designed for trucks, trailers, caravans, and commercial vehicles requiring ADR-compliant rear marking at an accessible price point. Fitted with 2 red LEDs and supplied pre-wired with a 40cm lead, it is surface-mounted with a 28mm centre-to-centre fixing distance and draws just 0.12A at 13.8V a minimal load well suited to multi-marker trailer installations and dual battery touring builds. The clip-in replaceable lens is a standout feature at this price point when a lens is cracked or discoloured in service, it can be swapped out independently without replacing the entire lamp body. ADR compliance to CRN 36840 and ADR 49/00, IP67 waterproof rating, and a 5-year warranty round out a marker light that punches well above its budget positioning. Key Specifications LED count: 2 red LEDs Colour: Red Light style: Rear position marker Voltage: 12V – 24V IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR 49/00, CRN 36840 Mount type: Surface mount Mount centre to centre: 28mm Connector: Pre-wired, 40cm wire lead Replaceable lens: Yes (clip-in) Housing colour: Black Dimensions: 58mm (L) × 35mm (W) × 21mm (D) Current draw: 0.12A @ 13.8V Packaging: Blister pack Warranty: 5 years Features & Benefits Clip-In Replaceable Lens — The lens can be removed and replaced independently if cracked or damaged in service — an unusual and valuable feature in the budget marker category that dramatically reduces the cost of maintaining a compliant multi-lamp trailer fitout over the long term. ADR Compliant — CRN 36840 & ADR 49/00 — Full ADR road approval for use as a rear position marker on Australian registered vehicles. Specific compliance codes are on-page for fleet documentation and inspection purposes. IP67 Waterproof and Dustproof — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes. Built for wash-downs, rain, and the wet and dusty conditions encountered in Australian transport and touring environments. Pre-Wired 40cm Lead — Supplied ready to connect with a 40cm wire lead — no in-field termination required, reducing installation time on multi-marker trailer and truck builds. Low 0.12A Current Draw — Minimal electrical load per marker suits high-density marker installations common on long trailers and road trains, and reduces total draw on dual battery and solar-powered touring setups. Low Profile Surface Mount — The compact 58mm × 35mm × 21mm footprint sits close to the trailer or vehicle body, reducing exposure to impact damage at loading docks and in tight clearance environments. Clip-In Replacement Lens Availability — Spare lenses can be ordered separately as replacement parts, supporting long-term cost-effective maintenance without full lamp replacement. 5-Year Warranty — A strong warranty commitment for a budget-positioned product, providing confidence in LED Autolamps' build quality across the full range — not just the premium tier. Technical Specs Specification Detail Brand LED Autolamps Part Number 58RM LED Count 2 Colour Red Light Style Rear Position Marker Light Type LED Voltage 12V – 24V IP Rating IP67 Compliance ADR 49/00 / CRN 36840 Mount Type Surface Mount Mount Centre to Centre 28mm Connector Pre-Wired, 40cm Lead Replaceable Lens Yes (Clip-In) Housing Colour Black Length 58mm Width 35mm Depth 21mm Current Draw 0.12A @ 13.8V Packaging Blister Pack Inner Carton Qty 50 Outer Carton Qty 100 Warranty 5 Years Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) B-doubles and road trains requiring multiple rear markers Caravans and camper trailers Box trailers and flatbed trailers Horse floats and stock trailers Horse floats and stock trailers Commercial vehicles requiring ADR 49/00 rear position markers Custom trailer builds on a budget Pairs well with: LED Autolamps amber front and side position markers for a matched full-trailer LED fitout LED Autolamps combination stop/tail/indicator lamp assemblies LED Autolamps 58RM replacement lens kits (clip-in, sold separately) LED Autolamps clearance lights and number plate lights Frequently Asked Questions Is the 58RM ADR compliant for use as a rear position marker on Australian vehicles? Yes. The 58RM carries ADR approval under ADR 49/00 with compliance code CRN 36840, confirming it is road-legal for use as a rear position marker on Australian registered vehicles. What does the clip-in replaceable lens allow you to do? The clip-in lens can be removed and replaced separately if it becomes cracked, discoloured, or damaged — without replacing the entire marker lamp. Replacement lenses are available separately from the LED Autolamps range. How long is the pre-wired lead on the 58RM? The 58RM is supplied pre-wired with a 40cm wire lead. Confirm this length is sufficient for your specific mounting location and wiring run before purchasing. Extension leads may be required in some applications. What current does the 58RM draw, and is it suitable for multi-marker trailer builds? The 58RM draws 0.12A at 13.8V per lamp — a very low draw that makes it well-suited to multi-marker installations common on long trailers and road trains, with minimal total impact on the vehicle's electrical system. What is the difference between the "budget range" and the premium LED Autolamps markers? The 58RM is positioned in the LED Autolamps budget range, offering ADR compliance, IP67 rating, and a 5-year warranty at a lower price point. Premium-range LED Autolamps markers may offer higher LED counts, greater lumen output, or additional construction features. Confirm specific performance differences with LED Autolamps for your application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Side Direction Indicator 3 LEDs, Clip-In Replaceable Lens, IP67 Product Overview The LED Autolamps 58AM is a 12/24V amber side direction indicator lamp with 3 LEDs and a clip-in replaceable lens, measuring 58mm x 35mm x 21mm in a black housing with a 28mm centre-to-centre mount. The same compact form factor as the 58ARM, it is purpose-built for side indicator use and approved under CRN38277 and ADR 6/00. Pre-wired, IP67 rated, and backed by a 5-year warranty. Features & Benefits 3 LED amber indicator output — clean, compliant amber side direction indicator function Clip-in replaceable lens — lens swaps independently without removing the full lamp housing from the panel Compact 58mm x 35mm form factor — low-profile surface mount suits a wide range of trailer and truck body side positions ADR approved — certified under CRN38277 and ADR 6/00 for legal on-road use as a side direction indicator IP67 rated — fully sealed against dust and water immersion Pre-wired — ready to connect on installation 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 58AM Lamp Type Side Direction Indicator LED Quantity 3 LED Colour Amber Housing Colour Black Voltage Range 12V / 24V Dimensions 58mm x 35mm x 21mm Mount Centre-to-Centre 28mm Current Draw 0.1A @ 13.8V Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR 6/00 — CRN38277 Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring side direction indicator lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 58ARM red/amber side marker (same 58mm x 35mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 58AM approved for road use in Australia? Yes. The 58AM is ADR approved under CRN38277 and ADR 6/00, meeting Australian Design Rules requirements for legal on-road use as a side direction indicator lamp. How does the 58AM differ from the 58ARM? The 58AM is an amber-only side direction indicator certified under ADR 6/00, while the 58ARM is a red/amber dual-colour side marker certified under ADR 45/01. Both share the same 58mm x 35mm x 21mm form factor, clip-in lens, and 0.1A current draw. What does the clip-in lens mean for maintenance? The lens clips out independently, allowing replacement without removing the full lamp housing — reducing maintenance time and cost. What is the IP rating on the 58AM? The 58AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 58AM carry? The 58AM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 97 LED Rectangular Rear Combination Lamp with Clip-In Lens Black Bracket, IP67 Product Overview The LED Autolamps 200BARWM is a 12/24V rectangular rear combination lamp covering stop, tail, indicator, and reverse functions across 97 LEDs in the 200 series form factor. Measuring 200mm x 92mm x 28mm with a black bracket, it's a wider-format step up from the standard 200 series delivering all four rear lighting functions in a single surface-mount unit for trailers, trucks, and tray bodies. The clip-in replaceable lens allows for quick, cost-effective lens swaps without replacing the full housing. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits 97 LEDs across four functions — high LED count delivers strong, consistent output across stop, tail, indicator, and reverse for maximum rear visibility Stop, tail, indicator, and reverse in one lamp — complete four-function rear lighting in a single 200mm unit, reducing wiring complexity Original rectangular 200 series design — the proven rectangular form factor suits trailers, trucks, and tray body rear panels Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and minimising downtime Black bracket — clean, professional finish suits a wide range of trailer and vehicle body aesthetics ADR road approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 200BARWM Lamp Type Stop / Tail / Indicator / Reverse LED Quantity 97 Voltage Range 12V / 24V Dimensions 200mm x 92mm x 28mm Housing Colour Black Lens Clip-in replaceable Mounting Surface mount (bracket included) Protection Rating IP67 Compliance ADR Packaging Blister Warranty 5 years Compatible With / Goes Well With Trailers, tray bodies, trucks, and light commercial vehicles requiring a wide-format four-function rear lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear combination lighting LED Autolamps 200BRM stop/tail lamp (same 200 series rectangular form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 200BARWM approved for road use in Australia? Yes. The LED Autolamps 200BARWM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across all four functions. What functions does the 200BARWM cover? It combines stop, tail, indicator, and reverse into a single assembly, providing a complete rear lighting solution for trailers, trucks, and tray bodies. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing and can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field. How does the 200BARWM differ from the standard 200 series lamps? The 200BARWM measures 200mm x 92mm — wider than the standard 200mm x 50mm 200 series lamps — and covers all four rear lighting functions across 97 LEDs in a single unit. What warranty does the 200BARWM carry? The 200BARWM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 72 LED Rectangular Stop/Tail/Indicator Assembly Black Bracket, IP67, 5-Year Warranty Product Overview The LED Autolamps 200BARM is a 12/24V rectangular rear combination lamp covering stop, tail, and indicator functions across 72 LEDs in the wider 200 series form factor. Measuring 200mm x 92mm x 28mm with a black bracket, it delivers three rear lighting functions in a single surface-mount unit a three-function counterpart to the 200BARWM which adds reverse. The clip-in replaceable lens allows for quick, cost-effective lens swaps without replacing the full housing. ADR road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits 72 LEDs across three functions — delivers strong, consistent stop, tail, and indicator output across a wide rectangular face Stop, tail, and indicator in one lamp — three rear lighting functions in a single 200mm unit, simplifying wiring and installation Original rectangular 200 series design — the proven rectangular form factor suits trailers, trucks, and tray body rear panels Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and minimising downtime Black bracket — clean, professional finish suits a wide range of trailer and vehicle body aesthetics ADR road approved — meets Australian Design Rules for legal on-road use across all three functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 200BARM Lamp Type Stop / Tail / Indicator LED Quantity 72 Voltage Range 12V / 24V Dimensions 200mm x 92mm x 28mm Housing Colour Black Lens Clip-in replaceable Mounting Surface mount (bracket included) Protection Rating IP67 Compliance ADR Packaging Blister Warranty 5 years Compatible With / Goes Well With Trailers, tray bodies, trucks, and light commercial vehicles requiring a wide-format three-function rear lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear combination lighting LED Autolamps 200BARWM stop/tail/indicator/reverse lamp (same form factor, adds reverse) LED Autolamps 200BRM stop/tail lamp (same 200 series, standard width) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 200BARM approved for road use in Australia? Yes. The LED Autolamps 200BARM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across stop, tail, and indicator functions. What is the difference between the 200BARM and the 200BARWM? The 200BARWM adds a reverse function and 97 LEDs vs 72 LEDs on the 200BARM. Both share the same 200mm x 92mm x 28mm black bracket form factor — choose the 200BARWM if reverse is required. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing and can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field. What is the IP rating on the 200BARM? The 200BARM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 200BARM carry? The 200BARM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 36 LED Rectangular Indicator Lamp Black, Pre-Wired, IP67, 5-Year Warranty Product Overview The LED Autolamps 200BAM is a 12/24V rectangular rear indicator lamp fitted with 36 LEDs in the classic 200 series form factor. Measuring 200mm x 50mm x 28mm with a black housing, it's a pre-wired surface mount lamp ADR approved under CRN75795 the indicator companion to the 200BRM stop/tail lamp for a matched black 200 series rear lighting set. Drawing 0.4A and rated IP67, backed by a 5-year warranty. Features & Benefits 36 LEDs — delivers bright, consistent amber indicator output across the full 200mm rectangular face Original 200 series design — the proven 200mm x 50mm rectangular form factor suits trailers, trucks, and tray body rear panels ADR road approved — certified under CRN75795 for legal on-road use as a rear indicator lamp in Australia IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Black housing — professional finish suits a wide range of trailer and vehicle body aesthetics 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Pre-wired surface mount — ready to connect and mount straight out of the blister pack 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 200BAM Lamp Type Rear Indicator LED Quantity 36 Voltage Range 12V / 24V Dimensions 200mm x 50mm x 28mm Current Draw 0.4A Mounting Surface mount Connector Pre-wired Housing Colour Black Protection Rating IP67 Compliance ADR — CRN75795 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, tray bodies, trucks, and light commercial vehicles 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear indicator lighting LED Autolamps 200BRM stop/tail lamp (same 200 series black rectangular form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 200BAM approved for road use in Australia? Yes. The 200BAM is ADR approved under CRN75795, meeting Australian Design Rules requirements for legal on-road use as a rear indicator lamp. How does the 200BAM pair with the 200BRM? Both lamps share the same 200mm x 50mm x 28mm black rectangular form factor, making the 200BAM and 200BRM a natural matched pair for indicator and stop/tail functions on the same trailer or truck body. What is the current draw of the 200BAM? The 200BAM draws 0.4A — note that no voltage reference was specified in the supplier data; confirm whether this is at 13.8V or 12V with LED Autolamps before publishing. What is the IP rating on the 200BAM? The 200BAM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 200BAM carry? The 200BAM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

IMO and USL Compliant 12/24V Marine Navigation Port Lamp ATAC Approved, IP67, Salt Spray Resistant Product Overview The LED Autolamps 52WR is a 12/24V red LED marine navigation lamp for the port (left) side of a vessel, measuring 76mm x 52mm x 25mm in a white housing. It is the port-side counterpart to the 52WG starboard lamp together forming a complete port and starboard navigation light pair. Complies with IMO codes, Uniform Shipping Laws, and ATAC requirements for Australian waters. Rated IP67 and salt spray resistant, backed by a 5-year warranty. Features & Benefits Port navigation lamp — red output for the port (left) side of the vessel, meeting international colour-coding requirements for marine navigation lights IMO and USL compliant — meets International Maritime Organization codes and Uniform Shipping Laws for legal marine navigation use ATAC compliant — meets Australian Transport Advisory Council requirements for Australian domestic waters Salt spray resistant — construction withstands the corrosive marine environment of coastal and offshore use IP67 rated — fully sealed against dust and water immersion White housing — standard navigation lamp appearance 12/24V dual voltage — compatible with 12V and 24V vessel electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 52WR Lamp Type Marine Navigation — Port LED Colour Red Housing Colour White Voltage Range 12V / 24V Dimensions 76mm x 52mm x 25mm Protection Rating IP67 Compliance IMO, USL, ATAC Warranty 5 years Compatible With / Goes Well With Recreational and commercial vessels requiring ATAC and IMO-compliant navigation lamps 12V and 24V vessel electrical systems LED Autolamps 52WG starboard navigation lamp (green — pairs with 52WR for a complete port/starboard set) Frequently Asked Questions What does the red light on the port lamp indicate? In marine navigation, red indicates the port (left) side of the vessel when facing forward. Other vessels seeing a red light know they are viewing the vessel's left side — a critical colour convention for collision avoidance at sea. What compliance standards does the 52WR meet? The 52WR complies with International Maritime Organization (IMO) codes, Uniform Shipping Laws (USL), and ATAC requirements — covering international and Australian domestic waterway navigation regulations. How does the 52WR pair with the 52WG? The 52WR (red/port) and 52WG (green/starboard) together form a complete port and starboard navigation light set. Both share the same 76mm x 52mm x 25mm white housing and identical specifications. Is the 52WR suitable for saltwater use? Yes. It is specifically salt spray resistant and rated IP67. Regular rinsing with fresh water after saltwater exposure is good practice to extend service life. What warranty does the 52WR carry? The 52WR is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

IMO and USL Compliant 12/24V Marine Navigation Starboard Lamp ATAC Approved, IP67, Salt Spray Resistant Product Overview The LED Autolamps 52WG is a 12/24V green LED marine navigation lamp for the starboard (right) side of a vessel, measuring 76mm x 52mm x 25mm in a white housing. It complies with International Maritime Organization (IMO) codes and Uniform Shipping Laws (USL), and meets ATAC requirements for Australian waters. Sealed to IP67 and built to withstand sea and salt spray exposure, backed by a 5-year warranty. Features & Benefits Starboard navigation lamp — green output for the starboard (right) side of the vessel, meeting international colour-coding requirements for marine navigation lights IMO and USL compliant — meets International Maritime Organization codes and Uniform Shipping Laws for legal marine navigation use ATAC compliant — meets Australian Transport Advisory Council requirements for Australian waters Salt spray resistant — construction withstands the corrosive marine environment of coastal and offshore use IP67 rated — fully sealed against dust and water immersion White housing — standard navigation lamp appearance 12/24V dual voltage — compatible with 12V and 24V vessel electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 52WG Lamp Type Marine Navigation — Starboard LED Colour Green Housing Colour White Voltage Range 12V / 24V Dimensions 76mm x 52mm x 25mm Protection Rating IP67 Compliance IMO, USL, ATAC Warranty 5 years Compatible With / Goes Well With Recreational and commercial vessels requiring ATAC and IMO-compliant navigation lamps 12V and 24V vessel electrical systems LED Autolamps port (red) navigation lamp — pair with 52WG for a complete port/starboard set Frequently Asked Questions What does the green light on the starboard lamp indicate? In marine navigation, green indicates the starboard (right) side of the vessel when facing forward. Other vessels seeing a green light know they are viewing the vessel's right side — a critical convention for collision avoidance at sea. What compliance standards does the 52WG meet? The 52WG complies with International Maritime Organization (IMO) codes, Uniform Shipping Laws (USL), and ATAC (Australian Transport Advisory Council) requirements — covering both international and Australian domestic waterway navigation regulations. Is the 52WG suitable for saltwater use? Yes. It is specifically described as salt spray resistant and rated IP67, making it suitable for coastal and marine environments. Regular rinsing with fresh water after saltwater exposure is recommended as good practice to extend service life. What voltage systems is the 52WG compatible with? It operates across 12V to 24V, covering the full range of recreational and commercial vessel electrical systems. What warranty does the 52WG carry? The 52WG is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Red Rear End Outline Marker Twin Pack No-Fastener Fit, 50x25mm, IP67 Product Overview The LED Autolamps 5025RM2 is a red rear end outline marker lamp supplied as a twin blister pack, measuring 50mm x 25mm x 21mm with a non-fastener fitting design that eliminates the need for screws or fixings during installation. The compact, low-profile form factor suits a wide range of trailer, caravan, and truck body edge-marking applications. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Non-fastener fitting design — installs without screws or fixings, saving time and simplifying installation on trailer and caravan body panels Twin blister pack — both lamps supplied for a complete left and right installation Low-profile compact 50mm x 25mm form factor — suits tight edge-marking positions on trailer bodies and caravans ADR approved — meets Australian Design Rules for legal on-road use as a rear end outline marker IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 5025RM2 Pack Contents 2 lamps Lamp Type Rear End Outline Marker LED Colour Red Voltage Range 12V / 24V Length 50mm Width 25mm Depth 21mm Mounting Non-fastener (no screws required) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring compact rear end outline marker lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear marker lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 5025RM2 approved for road use in Australia? Yes. The 5025RM2 is ADR approved, meeting Australian Design Rules requirements for legal on-road use as a rear end outline marker lamp. How does the non-fastener fitting work? The lamp is designed to fit without screws or traditional fasteners — it clips or presses into the mounting position, significantly reducing installation time compared to screw-mounted markers. What does the twin blister pack include? The pack contains two lamps for a complete left and right rear end outline marker installation. What is the IP rating on the 5025RM2? The 5025RM2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 5025RM2 carry? The 5025RM2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Reverse Lamp with Inbuilt Reflex Reflector Bracket Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 460WM is a 12/24V reverse lamp with an integrated reflex reflector, measuring 148mm x 122mm x 30mm and supplied with a bracket for individually mountable surface installation. The inbuilt reflector adds passive rear visibility and compliance without requiring a separate reflector unit suited to trucks, trailers, and commercial vehicles requiring a standalone reverse lamp in the 460 series format. IP67 rated and backed by a 5-year warranty. Features & Benefits Inbuilt reflex reflector — integrated passive reflector adds rear visibility and compliance in a single fitting Individually mountable with bracket — supplied with a bracket for independent surface mounting on trailer and truck body panels 148mm x 122mm form factor — sized to suit the 460 series Medium Jumbo lamp family IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460WM Lamp Type Reverse / Reflector Voltage Range 12V / 24V Dimensions 148mm x 122mm x 30mm Mounting Surface mount with bracket Reflector Inbuilt reflex Protection Rating IP67 Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring a standalone reverse lamp in the 460 series format 12V light vehicles and 24V heavy transport applications LED Autolamps 460ARRM (stop/tail/indicator — same 460 series; add 460WM for reverse) LED Autolamps 460ARWM (full combination including reverse — alternative to pairing 460ARRM + 460WM) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What road approval standard does the 460WM carry? Compliance certification was not confirmed in available supplier data — verify before road use. How does the 460WM pair with the 460ARRM? The 460ARRM covers stop, tail, and indicator functions. Adding the 460WM provides the reverse function separately — a practical option when mounting flexibility or separate circuit control of the reverse function is required. What does the inbuilt reflex reflector provide? The integrated reflector passively reflects light from other vehicles back towards the source, adding rear visibility and compliance without needing a separate reflector unit. What is the IP rating on the 460WM? The 460WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 460WM carry? The 460WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Rear Stop Lamp with Inbuilt Reflex Reflector Bracket Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 460RM is a 12/24V rear stop lamp with an integrated reflex reflector, measuring 148mm x 122mm x 30mm and supplied with a bracket for individually mountable surface installation. Matching the 460WM reverse lamp in form factor, it suits 460 series builds where individual lamp functions are mounted separately rather than as a single combination unit. IP67 rated and backed by a 5-year warranty. Features & Benefits Rear stop function — dedicated stop lamp for installations requiring individual function mounting Inbuilt reflex reflector — integrated passive reflector adds rear visibility and compliance without a separate unit Individually mountable with bracket — supplied with a bracket for independent surface mounting 148mm x 122mm form factor — matches the 460WM for a uniform appearance across the 460 series IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460RM Lamp Type Stop / Reflector Voltage Range 12V / 24V Dimensions 148mm x 122mm x 30mm Mounting Surface mount with bracket Reflector Inbuilt reflex Protection Rating IP67 Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring individually mounted stop lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 460WM reverse lamp (same 148x122mm form factor) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps 460ARRM and 460ARWM combination lamps (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What road approval standard does the 460RM carry? Compliance certification was not confirmed in available supplier data — verify before road use. How does the 460RM fit with the 460 series? The 460RM is the dedicated stop lamp in the 460 series, matching the 460WM reverse lamp in the same 148mm x 122mm x 30mm form factor — suited to builds where individual lamp functions are preferred over a single combination unit. What does the inbuilt reflex reflector provide? The integrated reflector passively reflects light from other vehicles back towards the source, adding rear visibility and compliance without needing a separate reflector unit. What is the IP rating on the 460RM? The 460RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 460RM carry? The 460RM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less