Real Power. Real Protection. Real Punch. Product Overview The Rockford Fosgate PM400X4 is a 400 Watt, 4-channel Class A/B amplifier purpose-built for marine, motorsport, and powersports environments and flexible enough to handle virtually any vehicle audio setup. Delivering 50W x 4 at 4 ohms, 100W x 4 at 2 ohms, or 200W x 2 bridged at 4 ohms, it brings genuine CTA-2006-rated output to boats, UTVs, 4WDs, and utes running in the harshest Australian conditions. What sets this amp apart from the competition is its Rockford Fosgate Element Ready™ construction a combination of marine-grade two-part epoxy-coated circuit boards, UV and corrosion-resistant hardware, and a cast aluminium heatsink engineered to dissipate heat in tight, sun-baked enclosures. Whether you're running a 4-way front-stage/rear-fill setup or a 3-way front-stage/subwoofer system, the PM400X4 is tuned and ready to deliver The PUNCH. Key Specifications 400W total power output (CTA-2006 compliant) 50W x 4 channels at 4 ohms | 100W x 4 channels at 2 ohms 200W x 2 channels at 4 ohms (bridged) Class A/B circuit topology 4-channel configuration; bridgeable Frequency response: 20 Hz – 20 kHz (±1 dB) THD+N: Less than 1% at rated power Input sensitivity: 150mV – 12V (low- and high-level) Crossover: 12 dB/octave Butterworth, 50 Hz – 250 Hz (HP/LP) On-board Punch EQ2: Bass +0 to +18 dB @ 45 Hz | Treble +0 to +12 dB @ 12.5 kHz (front and rear) Marine-grade two-part epoxy conformal coating on PCB Marine-grade stainless steel hardware Element Ready™ protection: Dust, UV, Temperature, Water, Corrosion & Vibration 2-year manufacturer warranty Features & Benefits Marine-Grade Element Ready™ Construction The PM400X4 isn't just weather-resistant  it's built for full marine deployment. The two-part epoxy conformal coating and stainless steel hardware protect against saltwater spray, humidity, mud, and vibration. Perfect for tinnie setups on the Swan or long offshore runs. Class A/B Trans•ana Topology Rockford Fosgate's Trans•ana circuit design simplifies the signal path, delivering a flat, distortion-free frequency response from 20 Hz to 20 kHz. Real-world dynamic performance that outperforms the spec sheet independent testing has measured distortion below 0.02%. C.L.E.A.N. Gain Setting Technology Calibrated Level Eliminates Audible Noise. The integrated LED clip indicators guide you to a perfect gain match between your head unit and amplifier no distortion, no guesswork, no blown tweeters. Front and rear channels have independent C.L.E.A.N. indicators (Blue: <0.5% THD | Violet: 1% THD | Red: 10%+ THD). High-Level Input with Auto Turn-On Connects directly to factory head units with speaker-level outputs no line output converter required. The Auto Turn-On circuit senses the audio signal and powers the amp automatically. Ideal for Aussie utes running OEM head units where an RCA tap isn't an option. On-Board Punch EQ2 with Bass & Treble Boost Dial in up to +18 dB of bass boost at 45 Hz and +12 dB of treble presence at 12.5 kHz per channel pair all from the stealth top-mounted control panel. Tune to taste for everything from skull-rattling subwoofer punch to crisp, open-air speaker clarity. Versatile 3- or 4-Way System Configuration Run 4-way full-range (front and rear speakers), 3-way (front component speakers bridged into a subwoofer pair), or 2-channel bridged mode for two high-excursion subs. One amplifier, multiple system options. MEHSA³ Cast Aluminium Heatsink Maximum Efficiency Heat Sink Application construction achieves up to five times better heat transfer than traditional mounting methods. Keeps the amp cool even when installed in enclosed bays or under fibreglass critical for Australian summers. Muted Turn-On Eliminates the pop or thump through your speakers at power-on a small but important detail that protects tweeters and subwoofers during ignition cycling. Technical Specs Specification Detail SKU PM400X4 Number of Channels 4 Total Power 400W Rated Power – 4 ohm (CTA-2006, <1.0% THD+N) 50W x 4 Rated Power – 2 ohm (CTA-2006, <1.0% THD+N) 100W x 4 Rated Power – 4 ohm Bridged (CTA-2006) 200W x 2 Circuit Topology Class A/B (Trans•ana) Bridgeable Yes Frequency Response 20 Hz – 20 kHz (±1 dB) THD + Noise Less than 1% Input Sensitivity Low-Level: 150mV – 4V / High-Level: 4V – 12V Signal Input Front: 2 x RCA + High-Level / Rear: 2 x RCA + High-Level Front Punch EQ2 Bass 0 dB to +18 dB @ 45 Hz Front Punch EQ2 Treble 0 dB to +12 dB @ 12.5 kHz Rear Punch EQ2 Bass 0 dB to +18 dB @ 45 Hz Rear Punch EQ2 Treble 0 dB to +12 dB @ 12.5 kHz Front High-Pass/Low-Pass Crossover 50 Hz – 250 Hz @ 12 dB/octave Butterworth Rear High-Pass/Low-Pass Crossover 50 Hz – 250 Hz @ 12 dB/octave Butterworth All-Pass Yes Auto-Sense Turn-On Yes High-Level Input Yes (with Auto Turn-On) Circuit Board Protection Marine-grade two-part epoxy conformal coating Heatsink Cast aluminium (MEHSA³ process) Hardware Marine-grade stainless steel Element Ready™ Dust, UV, Temperature, Water, Corrosion, Vibration CTA-2006 Compliant Yes Operating Voltage Not specified Visual Indicators Power/Protect LED; C.L.E.A.N. In/Out LED (Front & Rear) LED Colour Legend Blue: <0.5% THD / Violet: 1% THD / Red: 10%+ THD Dimensions (H x W x D) 60.5 x 197.1 x 280.2 mm (2.38 x 7.76 x 11.03 in) Shipping Weight 4.9 kg (10.8 lbs) Warranty 2 Years Compatible With Marine & Boat Audio Rockford Fosgate Punch Marine speaker range (PM series) Rockford Fosgate M2WL Wake Tower Speakers (6.5", 8", 10") Rockford Fosgate M2D4-12 Marine Subwoofers Tinnie, ski boat, pontoon, and cabin cruiser installs Paired with Rockford Fosgate PMX-5CAN Marine Head Unit Motorsport & Powersports Side-by-side UTVs (Can-Am, Polaris RZR, Yamaha YXZ) Rockford Fosgate UTV-specific speaker and sub packages Roll cage and overhead speaker bar mounts 4WD, Ute & Touring Vehicles Toyota LandCruiser (100, 200, 300 Series), Prado, HiLux Ford Ranger, Everest, Bronco Isuzu D-MAX / MU-X Nissan Patrol, Navara Mitsubishi Triton, Pajero Sport Any vehicle running an OEM (factory) head unit via high-level input Compatible Rockford Fosgate Accessories RFI-1 Amplifier Wiring Installation Kit (recommended for extended warranty) Rockford Fosgate Punch component speaker sets (P165-SI, P1675) Rockford Fosgate Punch subwoofers (P2D4-10, P3D4-12) Frequently Asked Questions Does this amplifier work with a factory (OEM) head unit? Yes. The PM400X4 features a high-level input that accepts speaker-level signals (up to 12V) directly from a factory head unit, with Auto Turn-On sensing no line output converter or aftermarket head unit required. Can the PM400X4 be used to run a subwoofer? Yes. Bridge channels 3 and 4 (rear pair) to deliver 200W into a 4-ohm subwoofer, while running full-range component speakers on channels 1 and 2. This creates a complete 3-way front-stage/sub system from a single amplifier. Is this amplifier suitable for a boat in saltwater conditions? Yes. The PM400X4 is built with marine-grade two-part epoxy conformal-coated circuit boards and corrosion-resistant stainless steel hardware as part of Rockford Fosgate's Element Ready™ construction, rated for dust, UV, temperature, water, corrosion, and vibration exposure. What does the C.L.E.A.N. system do and do I need it? C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) uses onboard LED indicators to guide precise gain matching between your source and amplifier, eliminating clipping distortion that damages speakers. It removes guesswork from setup and is highly recommended for any install. What warranty applies to the PM400X4 in Australia? The PM400X4 carries a 2-year manufacturer warranty. Australian warranty terms are administered through the authorised local distributor confirm coverage details at point of purchase, as Rockford Fosgate's US warranty terms apply only to products purchased through US-authorised dealers. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate PM1000X5 Punch Marine 1000W 5-Channel Amplifier One Amplifier. Your Entire System. Product Overview The Rockford Fosgate PM1000X5 is a 1000 Watt 5-channel amplifier purpose-built for marine and motorsport environments, combining Class A/B topology on the four full-range channels with Class-BD topology on the dedicated 5th subwoofer channel. Designed as a complete single-amplifier solution for a full marine audio system, the PM1000X5 drives dash speakers on the front channels, cockpit or transom speakers on the rear channels, and a subwoofer or subwoofer system on the high-efficiency 5th channel eliminating the need for multiple amplifiers and simplifying installation on boats, UTVs, and powersport vehicles where wiring space and mounting real estate are at a premium. The 5th channel Class-BD topology delivers higher efficiency and lower heat generation than a Class A/B subwoofer channel at equivalent power levels, complementing the sonic accuracy of the Class A/B front and rear channels across a complete system. Marine-grade two-part epoxy conformal-coated circuit boards, stainless steel hardware, tri-stage protection covering thermal, over-current, and short circuits, a cast aluminium heatsink, 2/4 channel input switch, infrasonic filter, on-board Punch EQ, 12 dB/octave Butterworth crossover, C.L.E.A.N. signal setup, and optional PLC2 remote level control make the PM1000X5 a fully specified marine system amplifier in a single unit. Key Specifications Channels: 5 (4 full-range + 1 subwoofer) Total power: 1000W Front/rear channel topology: Class A/B Subwoofer channel topology: Class-BD Crossover: 12 dB/octave Butterworth (HP/LP) Punch EQ: 0 dB to +18 dB @ 45 Hz Infrasonic filter: Yes Input switch: 2/4 channel Auto Turn-On: Yes (via high-level input) C.L.E.A.N. signal setup: Yes Remote level control: Optional PLC2 (sold separately) Circuit board protection: Marine-grade two-part epoxy conformal coating Hardware: Marine-grade stainless steel Heatsink: Cast aluminium Protection: Tri-stage thermal / over-current / short circuit Control panel: Stealth top-mounted Muted turn-on: Yes Dimensions: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Complete 5-channel single-amplifier marine system solution: The PM1000X5 powers an entire marine audio system from one unit. Front channels drive dash or helm speakers, rear channels drive cockpit or transom speakers, and the dedicated 5th channel drives a subwoofer or subwoofer system eliminating the cost, complexity, and wiring demands of running multiple separate amplifiers across a full marine installation. Class A/B front and rear channels for full-range accuracy: The four full-range channels use Class A/B topology, delivering the sonic accuracy and dynamic headroom preferred for marine speaker applications where tonal quality and midrange clarity are priorities across a full listening area. Class-BD 5th subwoofer channel for high-efficiency bass: The dedicated subwoofer channel uses Class-BD topology, delivering higher efficiency and lower heat generation than an equivalent Class A/B subwoofer channel. More of the available power reaches the subwoofer rather than being lost as heat particularly important in marine enclosures where thermal management is a real constraint. Infrasonic filter: Removes sub-audible frequencies below the subwoofer's useful operating range that consume amplifier power and cause excessive cone excursion without producing audible bass. Essential for protecting subwoofers in sealed marine enclosures from over-excursion at high volumes particularly useful when streaming music sources that may contain infrasonic content. 2/4 channel input switch: Drive all five output channels from just two RCA inputs when the source unit has limited preamp outputs. Eliminates the need for Y-adapters in marine and powersport installs where head unit RCA outputs are often limited. Tri-stage protection thermal, over-current, short circuit: Three independent protection circuits continuously monitor the amplifier, shutting down safely before damage occurs. Comprehensive protection for a single-amplifier system where a failure would take the entire installation offline. Marine-grade two-part epoxy conformal PCB coating: Circuit boards sealed against moisture, humidity, and salt spray essential for open-water use in coastal and estuarine conditions across Australia. Consistent with the conformal coating standard across the entire Rockford Fosgate Punch Marine amplifier range. Marine-grade stainless steel hardware: All fasteners resist corrosion in saltwater and humid environments for long-term mechanical integrity. Cast aluminium heatsink: Manages combined thermal output from Class A/B and Class-BD topologies across five channels, ensuring sustained performance in the high ambient temperatures common on Australian watercraft and powersport vehicles. High-level input with Auto Turn-On: Connects directly to factory head units via speaker-level outputs without requiring a dedicated remote turn-on wire. Ideal for OEM integration in boats and powersport vehicles without aftermarket head units. C.L.E.A.N. signal detection: LED-based real-time THD monitoring for accurate gain structure setup without test equipment practical for field installation on vessels and powersport vehicles. On-board Punch EQ (+18 dB @ 45 Hz): Dial in bass emphasis from the helm or install panel without an external equaliser. Effective in open-air marine environments where low-frequency energy dissipates rapidly. 12 dB/octave Butterworth crossover: Precise HP/LP crossover control for accurate frequency management across full-range and subwoofer channels in the same system. Optional PLC2 remote Punch Level Control: Helm or dash-mounted remote bass volume adjustment with input clip indicator. Sold separately. Muted turn-on: Eliminates startup pop or thump on system power-up. Stealth top-mounted control panel: All gain, crossover, EQ, and filter adjustments accessible from the top of the unit for clean installation and straightforward tuning. Technical Specs Specification Detail SKU PM1000X5 Brand Rockford Fosgate Number of Channels 5 (4 full-range + 1 subwoofer) Total Power 1000W Front/Rear Channel Topology Class A/B Subwoofer Channel Topology Class-BD Crossover 12 dB/octave Butterworth (HP/LP) Punch EQ 0 dB to +18 dB @ 45 Hz Infrasonic Filter Yes Input Switch 2/4 channel Signal Input High-level and low-level RCA Auto Turn-On Yes (via high-level input) C.L.E.A.N. Setup Yes Remote Level Control Optional PLC2 (sold separately) Muted Turn-On Yes Control Panel Stealth top-mounted Circuit Board Protection Marine-grade two-part epoxy conformal coating Hardware Marine-grade stainless steel Heatsink Cast aluminium Protection Tri-stage thermal / over-current / short circuit Rated Power (per channel) Confirm with supplier CEA-2006 Compliant Confirm with supplier Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Marine vessels requiring a complete single-amplifier system solution: bow riders, pontoons, ski boats, centre console fishing boats, and tinnies Powersport applications: UTVs, side-by-sides, and off-road 4WDs with full speaker and subwoofer systems Factory and aftermarket marine head units with RCA or high-level outputs Rockford Fosgate Punch and Prime marine speakers (front and rear channels) Rockford Fosgate marine subwoofers (5th channel Class-BD) Optional Rockford Fosgate PLC2 Punch Level Control (sold separately) Rockford Fosgate PMX-series source units and display heads Vessels and vehicles where installing multiple separate amplifiers is impractical Frequently Asked Questions How does the PM1000X5 power a complete marine audio system? The PM1000X5 drives four full-range speakers across its front and rear Class A/B channels and a subwoofer or subwoofer system on the dedicated 5th Class-BD channel covering an entire marine or powersport audio system from a single amplifier without needing additional units for the subwoofer channel. What is the difference between Class A/B and Class-BD in the PM1000X5? The four full-range channels use Class A/B topology for sonic accuracy and dynamic headroom across the full frequency range. The 5th subwoofer channel uses Class-BD topology for higher efficiency and lower heat generation at bass frequencies delivering more power to the subwoofer with less thermal stress than a Class A/B subwoofer channel of equivalent output. What does the infrasonic filter do? The infrasonic filter removes sub-audible frequencies below the subwoofer's useful operating range from the 5th channel signal. These frequencies consume amplifier power and cause excessive cone excursion without producing audible bass the filter protects the subwoofer from over-excursion at high volumes and improves overall system efficiency, particularly when streaming music sources that may contain infrasonic content. Can the PM1000X5 connect to a factory head unit? Yes. The high-level input with Auto Turn-On allows direct connection to factory speaker outputs without a dedicated remote turn-on wire. The 2/4 channel input switch also allows all five output channels to be driven from just two RCA inputs when the source unit has limited preamp outputs. Is the PM1000X5 suitable for saltwater marine environments? Yes. The PM1000X5 is built with marine-grade two-part epoxy conformal-coated circuit boards and stainless steel hardware, designed to withstand the moisture, salt spray, humidity, and vibration conditions of open saltwater and estuarine environments common across Australian coastal use. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate TM400X4ad Power Marine 400W Class-AD 4-Channel Amplifier Constant Power, Four Channels, Ultra-Compact Product Overview The Rockford Fosgate TM400X4ad is a 400 Watt 4-channel amplifier from the Power Marine series, built on Rockford Fosgate's proprietary Class-AD technology with Constant Power output at both 4-ohm and 2-ohm impedance loads. The 4-channel counterpart to the TM400X2ad, it extends the Constant Power advantage of Class-AD across four output channels powering a complete four-speaker marine or powersport system with consistent, predictable output regardless of whether 4-ohm or 2-ohm speakers are connected. Housed in the same ultra-compact chassis format as the rest of the Power Marine TM-series range, the TM400X4ad features dual fan forced induction cooling and a three-stage thermal lock extrusion heatsink managing the thermal demands of four Class-AD channels in the enclosed, high-temperature installation environments of marine vessels and powersport vehicles. A 2/4 channel input switch, 4-ohm bridged capability, differential high-level inputs with Auto Turn-On, Remote-Out, upgraded RCA connectors, C.L.E.A.N. input/output clip detection, real-time thermal sensing, and marine-grade two-part epoxy conformal PCB coating complete a 4-channel Power Marine amplifier built to power a full system in a single compact unit. Key Specifications Channels: 4 Total power: 400W Circuit topology: Class-AD (Rockford Fosgate proprietary) Constant Power: Yes same output at 4-ohm and 2-ohm Bridgeable: Yes 4-ohm bridged Input switch: 2/4 channel Cooling: Dual fan forced induction + dual extruded heatsinks + 3-stage thermal lock extrusion Inputs: Low-level RCA + high-level differential (with auto turn-on) Remote-Out: Yes (when using high-level inputs) Power/Ground connector: 8 AWG RCA connectors: Upgraded C.L.E.A.N.: Input + output clip detection with LED indicators Thermal protection: Real-time thermal sensing Control panel: Top-mounted Circuit board protection: Marine-grade two-part epoxy conformal coating Construction: Discrete surface mount technology Rated power: Confirm with supplier CEA-2006 compliant: Confirm with supplier Dimensions: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Rockford Fosgate proprietary Class-AD technology with Constant Power across four channels: Class-AD delivers the same output power at both 4-ohm and 2-ohm speaker impedances across all four channels simultaneously. For marine builds running 4-ohm or 2-ohm speakers in any combination across four positions, Constant Power ensures consistent, predictable output without impedance recalculation a practical advantage when mixing speaker brands or impedances in a multi-zone marine system. 4-channel full-range coverage for complete marine system builds: Four output channels power a complete four-speaker marine installation dash speakers, cockpit speakers, transom-mount speakers, or wakeboard tower speakers from a single compact amplifier without the complexity of multiple separate units. 2/4 channel input switch: Drive all four output channels from just two RCA inputs when the source unit has limited preamp outputs. Eliminates the need for Y-adapters in marine and powersport installs where head unit RCA outputs are often restricted consistent with the feature set of the PM600X4 and PM1000X5 in this catalogue. 4-ohm bridged capability: Bridge channel pairs to mono for high-power 2-channel or dedicated subwoofer driving, extending the TM400X4ad's system configuration flexibility beyond standard 4-channel stereo operation. Ultra-compact chassis: The same space-efficient compact format as the TM400X2ad and TM500X1br Power Marine amplifiers purpose-designed for the restricted mounting locations of marine vessels, UTVs, and powersport vehicles where conventional 4-channel amplifier footprints create fitment challenges. Dual fan forced induction cooling: Active forced air cooling via dual fans manages the thermal output of four Class-AD channels in enclosed, low-airflow marine and motorsport installation environments where passive convection cooling alone would be insufficient. Three-stage thermal lock extrusion with dual extruded heatsinks: Multi-stage passive heatsink design working in combination with the dual fans for comprehensive thermal management across four channels within the compact chassis. Real-time thermal sensing: Continuous temperature monitoring with real-time protection response, safeguarding all four channels during sustained high-output operation in elevated ambient temperatures. C.L.E.A.N. input and output clip detection with LED indicators: Simultaneous input and output THD monitoring across the amplifier for accurate gain structure setup and ongoing clip detection during use consistent with the TM-series standard and a step above the Punch Marine range. Differential high-level inputs with Auto Turn-On: Differential design rejects common-mode noise and ground loop interference common in marine electrical systems. Auto Turn-On eliminates the need for a dedicated remote wire ideal for OEM integration across the full range of Australian marine vessel and powersport vehicle head unit configurations. Remote-Out feature: Outputs a remote turn-on signal to downstream amplifiers or accessories when using high-level inputs useful for multi-amplifier marine system builds where a subwoofer amplifier needs to be triggered without a dedicated head unit remote output. Upgraded RCA connectors: Higher-quality connectors reducing signal degradation and improving long-term reliability in the vibration and moisture conditions of marine installations. Marine-grade two-part epoxy conformal PCB coating: Circuit boards sealed against moisture, salt spray, and humidity consistent with the conformal coating standard across the Rockford Fosgate Power Marine and Punch Marine amplifier ranges. Discrete surface mount technology construction: Compact, vibration-resistant circuit board assembly contributing to both the ultra-compact chassis dimensions and long-term reliability in high-vibration marine and motorsport environments. 8 AWG power/ground connectors: Appropriate wiring gauge for the current demands of a 400W 4-channel amplifier. Technical Specs Specification Detail SKU TM400X4ad Brand Rockford Fosgate Number of Channels 4 Total Power 400W Circuit Topology Class-AD (proprietary) Constant Power Yes 4-ohm and 2-ohm Bridgeable Yes 4-ohm bridged Input Switch 2/4 channel Cooling Dual fan forced induction + dual extruded heatsinks + 3-stage thermal lock extrusion Thermal Protection Real-time thermal sensing Signal Input Low-level RCA + high-level differential Auto Turn-On Yes (via high-level input) Remote-Out Yes (when using high-level inputs) Power/Ground Connector 8 AWG RCA Connectors Upgraded C.L.E.A.N. Input + output clip detection with LED indicators Control Panel Top-mounted Circuit Board Protection Marine-grade two-part epoxy conformal coating Construction Discrete surface mount technology Rated Power (per channel) Confirm with supplier CEA-2006 Compliant Confirm with supplier Crossover Confirm with supplier Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Marine vessels: bow riders, pontoons, ski boats, fishing boats, tinnies, and jet skis with four-speaker systems Powersport applications: UTVs, side-by-sides, dune buggies, and off-road 4WDs with full four-speaker builds Factory and aftermarket marine head units with RCA or high-level outputs Rockford Fosgate Punch and Prime marine speakers 4-ohm or 2-ohm (all four channels) Rockford Fosgate TM500X1br Power Marine mono amplifier (for combined 4-channel full-range + mono subwoofer system builds) Downstream amplifiers triggered via Remote-Out in multi-amplifier marine system configurations Vessels and vehicles where a compact 4-channel amplifier with OEM integration capability is required Frequently Asked Questions What is the difference between the TM400X4ad and TM400X2ad? Both are Power Marine Class-AD amplifiers with Constant Power output at 4 and 2 ohms, identical chassis, dual fan cooling, and the same feature set. The TM400X4ad has four output channels for powering a complete four-speaker system, while the TM400X2ad has two output channels. The TM400X4ad also adds a 2/4 channel input switch not present on the TM400X2ad. Choose the TM400X4ad for four-speaker coverage; choose the TM400X2ad for a two-speaker or dedicated bridged mono application. What does Constant Power mean for speaker pairing in a marine build? Constant Power means the TM400X4ad delivers the same output across all four channels regardless of whether 4-ohm or 2-ohm speakers are connected. This removes the need to recalculate expected power output when mixing speaker impedances across different positions on the vessel simplifying system design and ensuring consistent volume levels across all four channels. Can the TM400X4ad be bridged to drive a subwoofer? Yes. The TM400X4ad is bridgeable to 2-channel mono into 4-ohm loads, allowing a channel pair to drive a subwoofer while the remaining two channels continue to power full-range speakers enabling a 3-channel system configuration from a single 4-channel amplifier. Confirm the minimum bridged impedance with your supplier before connecting. What does the 2/4 channel input switch do? It allows two RCA inputs to feed all four output channels simultaneously. When a marine head unit has only one stereo RCA preamp output, the 2/4 channel input switch eliminates the need for Y-adapters simplifying wiring and reducing signal path components in the installation. Is the TM400X4ad suitable for saltwater marine environments? Yes. Marine-grade two-part epoxy conformal-coated circuit boards and the active dual fan cooling system make the TM400X4ad suitable for open saltwater and estuarine environments. The conformal coating resists moisture, salt spray, and humidity, while the active cooling manages heat in enclosed installation spaces where passive cooling would be insufficient. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate PM600X4 Punch Marine 600W 4-Channel Amplifier Versatile Power, Marine-Grade Durability Product Overview The Rockford Fosgate PM600X4 is a 600 Watt 4-channel Class A/B amplifier purpose-built for marine and motorsport environments. Designed for versatility as much as output, the PM600X4 operates in true 4-channel stereo mode for full speaker coverage, bridges to a high-power 2-channel configuration for dedicated subwoofer or zone driving, or runs in 3-channel mode with stereo speakers on the front channels and subwoofers on the rear all from a single amplifier with no additional hardware required. Marine-grade two-part epoxy conformal coating on the circuit boards, stainless steel hardware, and a cast aluminium heatsink make the PM600X4 built to withstand the moisture, salt spray, vibration, and heat conditions of open Australian watercraft and powersport vehicles. High-level input with Auto Turn-On, C.L.E.A.N. signal detection, RCA pass-through outputs, on-board Punch EQ with +18 dB boost at 45 Hz, a 12 dB/octave Butterworth crossover, and optional PLC2 remote level control complete an amplifier equally at home in a serious marine audio build or a high-output powersport installation. Key Specifications Channels: 4 (stereo), bridgeable to 2-channel, 3-channel mode capable Total power: 600W Circuit topology: Class A/B Crossover: Variable HP/LP 12 dB/octave Butterworth Punch EQ: 0 dB to +18 dB @ 45 Hz Inputs: High-level and low-level (RCA) Auto Turn-On: Yes (via high-level input) RCA pass-through outputs: Yes C.L.E.A.N. signal setup: Yes Remote level control: Optional PLC2 (sold separately) Circuit board protection: Marine-grade two-part epoxy conformal coating Hardware: Marine-grade stainless steel Heatsink: Cast aluminium Protection: Short circuit and over-current Control panel: Stealth top-mounted Muted turn-on: Yes Dimensions: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits True 4-channel, 2-channel bridged, and 3-channel operating modes: The PM600X4 adapts to virtually any marine or powersport audio system configuration without additional hardware. Run four full-range speakers in stereo, bridge both channel pairs for high-power 2-channel subwoofer or zone driving, or combine stereo front speakers with bridged rear subwoofer channels in 3-channel mode all from one amplifier. Class A/B circuit topology with high dynamic power: Class A/B delivers the sonic accuracy and dynamic headroom preferred for full-range speaker applications, making the PM600X4 a natural fit for four-speaker marine systems where tonal quality matters as much as output level. Marine-grade two-part epoxy conformal PCB coating: Circuit boards are sealed against moisture, humidity, and salt spray essential for open-water use in coastal and estuarine conditions across Australia. The same conformal coating standard applied across the Rockford Fosgate Punch Marine amplifier range. Marine-grade stainless steel hardware: All fasteners and hardware are stainless steel, resisting corrosion in saltwater and humid environments for long-term mechanical integrity. Cast aluminium heatsink: Manages thermal output from the Class A/B topology efficiently, ensuring sustained performance during extended use in the high ambient temperatures common on Australian watercraft and powersport vehicles during summer. High-level input with Auto Turn-On: Connects directly to factory head units or speaker-level outputs without requiring a dedicated remote turn-on wire. Ideal for retrofit marine installs and vessels without aftermarket head units. C.L.E.A.N. signal detection: Rockford Fosgate's proprietary gain-setting system uses LED indicators to show real-time THD levels, ensuring accurate gain structure without an oscilloscope or test tones practical for field installation on boats and powersport vehicles. RCA pass-through outputs: Route the signal to additional downstream amplifiers or signal processors without Y-adapters. Keeps the system wiring clean and expandable as the installation grows. Variable HP/LP 12 dB/octave Butterworth crossover: Independent high-pass and low-pass crossover control allows precise frequency management across full-range speakers and subwoofer channels in the same system. On-board Punch EQ (+18 dB @ 45 Hz): Add the signature Rockford bass punch without an external equaliser. Particularly effective in open-air marine and powersport environments where low-frequency energy dissipates rapidly. Optional PLC2 remote Punch Level Control: Add a dash or helm-mounted remote volume knob for convenient bass output adjustment underway. The PLC2 includes an input clip indicator and is sold separately. Muted turn-on: Eliminates the startup pop or thump that can stress speakers and disturb passengers during system power-up. Stealth top-mounted control panel: All gain, crossover, and EQ adjustments are accessible from the top of the unit for clean installation and straightforward setup and tuning. Short circuit and over-current protection: Two independent protection circuits safeguard the amplifier and connected speakers against common installation faults and operating conditions. Technical Specs Specification Detail SKU PM600X4 Brand Rockford Fosgate Number of Channels 4 Total Power 600W Circuit Topology Class A/B Operating Modes 4-channel stereo / 2-channel bridged / 3-channel Crossover Variable HP/LP 12 dB/octave Butterworth Punch EQ 0 dB to +18 dB @ 45 Hz Signal Input High-level and low-level RCA Signal Output RCA pass-through Auto Turn-On Yes (via high-level input) C.L.E.A.N. Setup Yes Remote Level Control Optional PLC2 (sold separately) Muted Turn-On Yes Control Panel Stealth top-mounted Circuit Board Protection Marine-grade two-part epoxy conformal coating Hardware Marine-grade stainless steel Heatsink Cast aluminium Protection Short circuit / over-current Rated Power Confirm with supplier CEA-2006 Compliant Confirm with supplier Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Marine vessels: bow riders, pontoons, ski boats, fishing boats, tinnies, and centre console vessels Powersport applications: UTVs, side-by-sides, dune buggies, and off-road 4WDs Factory and aftermarket marine head units with RCA or high-level outputs Rockford Fosgate Punch and Prime marine speakers (4-channel stereo mode) Rockford Fosgate marine subwoofers (bridged rear channels in 2 or 3-channel mode) Optional Rockford Fosgate PLC2 Punch Level Control (sold separately) Rockford Fosgate PMX-series source units and display heads Downstream amplifiers or signal processors via RCA pass-through outputs Frequently Asked Questions What are the operating modes of the PM600X4? The PM600X4 operates in three configurations: standard 4-channel stereo for four speakers, bridged 2-channel for high-power subwoofer or zone driving, or 3-channel mode combining stereo front speakers with bridged rear subwoofer channels providing full system flexibility from a single amplifier without additional hardware. Can the PM600X4 connect directly to a factory head unit? Yes. The high-level input with Auto Turn-On circuit allows direct connection to factory head unit speaker outputs without requiring a dedicated remote turn-on wire or RCA outputs ideal for OEM integration in boats and vehicles without aftermarket head units. What is C.L.E.A.N. and why is it useful for marine installation? C.L.E.A.N. (Clip Level Elimination and Noise) is Rockford Fosgate's proprietary gain-setting system using LED indicators to show real-time THD levels during setup. For marine and powersport installs where bringing test equipment onto a vessel or vehicle is impractical, C.L.E.A.N. allows accurate gain structure to be set quickly using the amplifier's own indicators. Does the PM600X4 include a remote level control? No. The optional Punch Level Control (PLC2) is sold separately and connects to the dedicated remote control input on the amplifier for convenient helm or dash-mounted bass volume adjustment. The PLC2 also includes an input clip indicator. Is the PM600X4 suitable for saltwater marine environments? Yes. The PM600X4 is built with marine-grade two-part epoxy conformal-coated circuit boards and stainless steel hardware, specifically designed to withstand the moisture, salt spray, humidity, and vibration conditions of open saltwater and estuarine environments common across Australian coastal use. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Highlights: Highlights: SPECIFICATIONS: FREQUENCY RESPONSE: 10 HZ TO 40 KHZ (-3DB @ 4 OHM RATED POWER) PEAK POWER OUTPUT: 1500W RATED POWER OUTPUT (4 OHM): 100 W RMS X 6 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A) RATED POWER OUTPUT (2 OHM): 140 W RMS X 6 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A) RATED POWER OUTPUT (4 OHM BRIDGED): 280 W RMS X 3 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A) INPUT SENSITIVITY: 0.3 V TO 8 V RMS, USER ADJUSTABLE INPUT IMPEDANCE: 7K OHM NOMINAL HIGH-PASS/LOW-PASS FULL RANGE FILTER: YES, USER SELECTABLE FILTER CROSS-OVER FREQUENCY: 32 HZ TO 320 HZ, USER ADJUSTABLE BASS-BOOST: 0 TO 9 DB, USER ADJUSTABLE (ZONE 3 ONLY) OPERATING VOLTAGE: 21.6 V TO 32 V DC REMOTE SWITCH-ON: YES - 6 V THRESHOLD CURRENT CONSUMPTION (STANDBY): < 1 MA @ 28.8 V INPUT CURRENT CONSUMPTION (IDLE): < 1.25 A @ 28.8 V INPUT CURRENT CONSUMPTION (MAX): 35 A @ 28.8 V INPUT FUSE RATING: 3 X 20 A ATC BLADE-TYPE (SAE J1171 COMPLIANT) PROTECTION CIRCUITS: REVERSE-VOLTAGE, INPUT UNDER/OVER VOLTAGE, OVER-TEMPERATURE, OUTPUT SHORT-CIRCUIT OPERATING TEMPERATURE RANGE: 0 TO 50¬∞C (32 TO 122¬∞F) INGRESS PROTECTION RATING: DRY AREA INSTALLATION ONLY DIMENSIONS: 420 MM (L) X 210 MM (W) X 57 MM (H) OR 16-9-16" (L) X 8-1/4" (W) X 2-1/4" (H) WEIGHT: 5.15 KG OR 11.35 LBS. WITH COVER Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

Rockford Fosgate M2-750X5 M2 Series 750 Watt 5-Channel Full-Range Class-D Element Ready Marine Amplifier A marine grade 750W 5-channel Full-Range Class-D amplifier delivering 100W x 4 plus 350W x 1 at 2-ohm (CTA-2006 rated). Features independent front, rear, and subwoofer channel crossover control, Continuously Variable Punch EQ, variable infrasonic filter, C.L.E.A.N. gain calibration, Rollback Protection, NOMAD speaker protection, RLC remote level control, Auto-Sense turn-on, RCA pass-free conformal coated circuit board, and 2/4/5 channel input selection. Backed by a 2 year warranty. Product Overview The Rockford Fosgate M2-750X5 is a 750W 5-channel Full-Range Class-D marine amplifier from the M2 Element Ready series, providing a complete single-amplifier solution for powering both marine speakers and a subwoofer from the one unit. Rated continuous power is 50W x 4 plus 200W x 1 at 4-ohm, or 100W x 4 plus 350W x 1 at 2-ohm (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 114W x 4 plus 426W x 1 at 2-ohm, and 234W x 2 bridged at 4-ohm on the full-range channels. The M2-750X5 provides fully independent crossover control for the front, rear, and subwoofer channels, each with their own high-pass and low-pass crossover adjustments at 12dB/octave Butterworth (50Hz-250Hz) plus a variable infrasonic filter on the subwoofer channel (15Hz-40Hz). A 2/4/5 channel input selection switch enables flexible integration with source units providing different numbers of RCA outputs. Three dedicated sets of RCA and high-level inputs cover front, rear, and subwoofer channels separately. C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) provides independent input and output clip indicators for each channel group. A Continuously Variable onboard Punch EQ delivers up to 18dB of bass boost at 45Hz for the subwoofer channel. The circuit board is conformal coated against dust and water, and the UV stable powder coated cast aluminium heatsink provides environmental protection. Zinc nickel-plated marine grade brass connection terminals resist corrosion. Auto-Sense turn-on removes the need for a dedicated remote wire, with a RAP bypass switch available. An RLC remote level control is included for in-cabin subwoofer volume adjustment. Rollback Protection and NOMAD speaker protection are active throughout. RATS tested and optimised using AudioGraph PowerCube. Features & Benefits Complete 5-Channel Marine System in One Amplifier: The M2-750X5 powers front speakers, rear speakers, and a subwoofer from a single unit, making it a space-efficient solution for full marine audio builds without the need for two separate amplifiers. Independent Crossover Control for Each Channel Group: Front, rear, and subwoofer channel groups each have independent high-pass and low-pass crossover controls at 12dB/octave Butterworth (50Hz-250Hz), plus the subwoofer channel adds a variable infrasonic filter (15Hz-40Hz). This level of independent control across all channels is not available on the M2-200X2 or M2-500X1 separately. 2/4/5 Channel Input Selection Switch: The input selection switch allows the M2-750X5 to integrate with source units providing 2, 4, or 5 channels of RCA output, reducing the need for Y-cables or signal splitting in installations where the source unit has fewer RCA outputs. Continuously Variable Punch EQ - Up to 18dB at 45Hz: The onboard Punch EQ provides up to 18dB of continuously adjustable bass boost at 45Hz on the subwoofer channel, allowing output to be tuned to the acoustic environment without a separate EQ or DSP. Variable Infrasonic Filter - 15Hz to 40Hz Tunable: The subwoofer channel infrasonic filter is tunable from 15Hz to 40Hz at 12dB/octave, providing precise low-frequency protection across different subwoofer drivers and enclosure types. C.L.E.A.N. Technology - Per-Channel Clip Monitoring: C.L.E.A.N. provides dedicated input and output clip indicators for the front, rear, and subwoofer channels independently, enabling accurate gain calibration across all five channels without carrying distortion over into adjacent channels. RLC Remote Level Control Included: The included RLC remote level control allows subwoofer output volume to be adjusted from the helm or seating position without accessing the amplifier. Rollback Protection, NOMAD, and Conformal Coated PCB: Rollback Protection dynamically manages output to prevent thermal stress on the output devices. NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. The conformal coated circuit board protects against dust and water ingress at the PCB level. Technical Specs Specification Detail SKU M2-750X5 Number of Channels 5 (4 full-range + 1 subwoofer) Total Power 750W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 50W x 4 + 200W x 1 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 100W x 4 + 350W x 1 Rated Power - 4-ohm Bridged (CTA-2006) 200W x 2 (full-range channels) Dynamic Power - 4-ohm (PowerCube) 70W x 4 + 241W x 1 Dynamic Power - 2-ohm (PowerCube) 114W x 4 + 426W x 1 Dynamic Power - 4-ohm Bridged (PowerCube) 234W x 2 (full-range channels) Circuit Topology Full-Range Class-D Bridgeable Yes (full-range channels) Frequency Response 20 Hz - 20 kHz THD + Noise Less than 1.0% at 4-ohm and 2-ohm Input Sensitivity Low-Level: 150mV - 4V / High-Level: 450mV - 12V Signal Input Front: 2 x RCA + 4-Pin Molex / Rear: 2 x RCA + 4-Pin Molex / Sub: 2 x RCA + 4-Pin Molex Input Selection 2/4/5 Channel Switch Tone Controls Punch EQ: 0 to +18dB at 45Hz (Continuously Variable, Sub channel) Front High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Front Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Sub Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Sub Infrasonic Filter 15 Hz - 40 Hz at 12dB/Octave Butterworth (Variable) Remote Controls Yes (RLC Remote Level Control included) Auto-Sense Turn-On Yes (with RAP bypass switch) Power Wire Gauge 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Terminals Zinc Nickel-Plated Marine Grade Brass Cooling Convection Heatsink UV Stable Powder Coated Cast Aluminium (Focused Mass) Circuit Board Protection Conformal Coated Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 120A Max Current Draw at 13.8V Sinewave 71A Visual Indicators Power/Protect / C.L.E.A.N. In / C.L.E.A.N. Out (Front, Rear, Sub) Dimensions (H x W x D) 49 x 173 x 285mm (1.9 x 6.8 x 11.2 inch) Shipping Weight 2.78kg CTA-2006 Compliant Yes Quality Testing RATS (Rockford Automated Testing System) Warranty 2 Years Compatible With / Goes Well With The M2-750X5 suits marine watercraft and powersports applications requiring a single-unit 5-channel amplifier solution for speakers and a subwoofer. The 2/4/5 channel input switch makes it compatible with a wide range of source units. For higher output marine amplification, refer to the M5-1500X5. Goes Well With: PMX-1 - Rockford Fosgate Punch marine media receiver, a clean source unit pairing for the M2-750X5 in a full marine audio build M2-8H - M2 series 8 inch Color Optix marine horn speakers, powered by the four full-range channels of the M2-750X5 M2WL-8 / M2WL-8B - M2 series wake tower speakers for powering via the full-range channels of the M2-750X5 M210S4B / M212S4 - M2 series marine subwoofers driven by the dedicated 350W subwoofer channel of the M2-750X5 M5-1500X5 - Higher output M5 series 5-channel marine amplifier for builds requiring more power across all channels RFW4R / RFW4B - Rockford Fosgate 4 AWG marine amplifier wiring kits (red or black) matched to the M2-750X5's 4 AWG power wire requirement Frequently Asked Questions What is the difference between the M2-750X5 and the M5-1500X5? Both are 5-channel marine amplifiers, but they differ significantly in output and feature set. The M2-750X5 is from the M2 Element Ready series, rated at 100W x 4 plus 350W x 1 at 2-ohm, using Full-Range Class-D topology throughout all channels with conformal coating for environmental protection. The M5-1500X5 is from the premium M5 series, rated at 100W x 4 plus 600W x 1 at 2-ohm using Class-AD on full-range channels and Class-BD on the sub channel, with full IPX6 water intrusion rating, the PRESET feature for UTV kits, and greater than 75% efficiency. Choose the M2-750X5 for a complete, economical single-amplifier marine system; choose the M5-1500X5 for the highest protection rating and maximum subwoofer output. What does the 2/4/5 channel input selection switch do? The input selection switch configures the M2-750X5 to work with source units that provide 2, 4, or 5 channels of RCA output. On a 2-channel RCA setting, the front RCA inputs feed all five channels internally with the amp distributing signal appropriately. On 4-channel, front and rear pairs are used independently. On 5-channel, all three RCA input pairs (front, rear, sub) are used separately for full independent control. This removes the need for Y-cables in installations where the source unit has fewer RCA outputs. Can the M2-750X5 be used to power wake tower speakers? Yes. The four full-range channels can power wake tower speakers such as the M2WL-8 or M2WL-8B, with the dedicated subwoofer channel handling a marine subwoofer simultaneously. The 100W x 4 at 2-ohm rated output per channel is well matched to M2 series marine speakers in typical on-water listening conditions. What fuse does the M2-750X5 require and is it included? The M2-750X5 requires a 120A fuse, which is not included in the box and must be sourced separately. This is a larger fuse than the 80A used on the M2-500X1 and M2-200X2, reflecting the M2-750X5's higher current demand of up to 71A maximum at sinewave. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Does the M2-750X5 require a dedicated remote turn-on wire? Not necessarily. The Auto-Sense feature activates the amplifier automatically when it detects a high-level (speaker-level) input signal, removing the need for a dedicated remote wire when integrating with OEM or aftermarket source units without a remote output. A RAP bypass switch is also included for vessels with Retained Accessory Power systems to prevent the amplifier from staying on after the ignition is switched off.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

It’s The Difference Between Hearing The Music And Feeling ItThese efficient, easy-to-install amplifiers work with your compatible Fusion stereo system1 and let you choose from monoblock, multichannel, and zone amplifier options.The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel. These amplifiers use the Easy Tune feature2, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments. Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature. Easily install the amplifiers on board with the included mounting brackets. The ignition-protected design helps prevent potential damage from overheating. The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. You can connect up to two speakers per channel, increasing setup options. The amplifiers are designed to last season after season. They have been tested for a high level of protection against salt fog, temperature, vibration, and UV. Add extra power to your system with this 2000-watt (650-watt RMS) monoblock amplifier that’s specifically designed to power a subwoofer. This 4-channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. This 6-channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. This 8-channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power. The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you. A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating. These amps have less distortion and noise, so you enjoy quality audio. Mounting brackets are included for simple installation. Don’t worry about potential overheating damage with our ignition protection design. Specifications: Physical dimensions without bracket (LxWxH) Monoblock/4 Channel: 9.25″ x 7.06″ x 1.75″ (235 x 180 x 45 mm) Physical dimensions with bracket (LxWxH) Monoblock/4 Channel: 9.25″ x 7.06″ x 2.13″ (235 x 180 x 50 mm) Weight Monoblock/4 Channel: 4.85 lb (2.2 kg) Water rating Monoblock/4/6/8 Channel: IPX2 Amplifier class Class-D CEA-2006 power rating Monoblock: 650 watt RMS x 1 @ 14.4 V input - 4 ohm < 1% THD Peak power (Watts) Monoblock: 2000 watts Input sensitivity Monoblock: 2.15 V RMS Input impedance Monoblock/4/6/8 Channel: 22k ohm Operating voltage Monoblock/4/6/8 Channel: 10.8 V - 16 V DC Current draw, in standby/off using AMPLIFIER ON wire Monoblock/4/6/8 Channel: < 5 mA @ 14.4 V input Zone: < 1 mA @ 14.4 V input Current draw, on, no audio Monoblock: < 1.15 A @ 14.4 V input Power-cable fuse or circuit breaker rating (not included) 40 A Ignition Safety Protected (SAE J1171) Yes Protection circuits Reverse voltage Input under/over voltage Over Temperature Output short circuit Operating temperature range 0° to 50° C Warranty 3 years Accessories: Cables & Chargers Connectors Mounts Compatible Devices: Apollo RA670 Apollo RA770 Apollo WB670 Fusion EL Series Marine Speakers Fusion FM Series Marine Speakers Fusion FM Series Marine Subwoofers Fusion RA210 Marine Stereo Fusion Signature Series 3 Marine Speakers Fusion Signature Series 3 Marine Subwoofers Fusion Signature Series 3 Marine Wake Tower Speakers Fusion XS Series Marine Speakers Fusion XS Series Marine Subwoofers What's in the Box: One Apollo monoblock amplifier One mounting bracket One power connector One speaker connector Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Mounting template Installation instructions Important safety and product information (ISPI) Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

It’s The Difference Between Hearing The Music And Feeling ItThese efficient, easy-to-install amplifiers work with your compatible Fusion stereo system1 and let you choose from monoblock, multichannel, and zone amplifier options.The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel. These amplifiers use the Easy Tune feature2, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments. Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature. Easily install the amplifiers on board with the included mounting brackets. The ignition-protected design helps prevent potential damage from overheating. The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. You can connect up to two speakers per channel, increasing setup options. The amplifiers are designed to last season after season. They have been tested for a high level of protection against salt fog, temperature, vibration, and UV. Add extra power to your system with this 2000-watt (650-watt RMS) monoblock amplifier that’s specifically designed to power a subwoofer. This 4-channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. This 6-channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. This 8-channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power. The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you. A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating. These amps have less distortion and noise, so you enjoy quality audio. Mounting brackets are included for simple installation. Don’t worry about potential overheating damage with our ignition protection design. Specifications: Physical dimensions without bracket (LxWxH) 6 Channel: 11.69″ x 7.06″ x 1.75″ (297 x 180 x 45 mm) Physical dimensions with bracket (LxWxH) 6 Channel: 11.69″ x 7.06″ x 2.13″ (297 x 180 x 50 mm) Weight Monoblock/4 Channel: 6 Channel: 5.95 lb (2.7 kg) Water rating Monoblock/4/6/8 Channel: IPX2 Amplifier class Class-D CEA-2006 power rating 6 Channel: 150 watt RMS x 6 @ 14.4 V input - 4 ohm < 1% THD Total rated power output - 6 Channel: 290 watt RMS x 6 @ 14.4 V input - 2 ohm < 1% THD Total rated power output - 6 Channel: 580 watt RMS x 3 @ 14.4 V input - 4 ohm Bridged < 1% THD Peak power (Watts) 6 Channel: 1800 watts Input sensitivity 4/6/8 Channel: 1.6 V RMS Input impedance Monoblock/4/6/8 Channel: 22k ohm Operating voltage Monoblock/4/6/8 Channel: 10.8 V - 16 V DC Current draw, in standby/off using AMPLIFIER ON wire Monoblock/4/6/8 Channel: < 5 mA @ 14.4 V input Zone: < 1 mA @ 14.4 V input Current draw, on, no audio 6 Channel: < 1.32 A @ 14.4 V input Power-cable fuse or circuit breaker rating (not included) 40 A Ignition Safety Protected (SAE J1171) Yes Protection circuits Reverse voltage Input under/over voltage Over Temperature Output short circuit Operating temperature range 0° to 50° C Warranty 3 years Accessories: Cables & Chargers Connectors Mounts Compatible Devices: Apollo RA670 Apollo RA770 Apollo WB670 Fusion EL Series Marine Speakers Fusion FM Series Marine Speakers Fusion FM Series Marine Subwoofers Fusion RA210 Marine Stereo Fusion Signature Series 3 Marine Speakers Fusion Signature Series 3 Marine Subwoofers Fusion Signature Series 3 Marine Wake Tower Speakers Fusion XS Series Marine Speakers Fusion XS Series Marine Subwoofers What's in the Box: One Apollo monoblock amplifier One mounting bracket One power connector One speaker connector Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Mounting template Installation instructions Important safety and product information (ISPI) Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less