A Compact Yet Powerful 2-Channel Amplifier Designed to enhance your in-car audio experience, the powerful GM-A3702 gives you total installation freedom and very low distortion. With a one-body heat sink and gain adjustment of up to 6.5V, you can turn your in-car audio experience into the sound staging environment that you’re looking for. The GM-A3702 offers support for 2 Ohm and 4 Ohm speakers, and can produce up to 500 W of power when bridged. Growing Power, Shrinking SizeNew Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. Automatic Signal Sensing & Turn OnPioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level. Features: 500 Watts Max Power Automatic signal sensing and Turn-ON Hi-Volt input level control Balanced isolator input circuit Specifications:General RCA Inputs: 2-CH Amplifier Class: Class AB Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 25A x 1 Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in) Terminal Type: Screw Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 246(W) X 60(H) X 180(D) mm Power Continuous Power (RMS) Output @ 1‚Ѷ: N/A Continuous Power (RMS) Output @ 2‚Ѷ: 95W x 2 Continuous Power (RMS) Output @ 4‚Ѷ: 60W x 2 Continuous Power (RMS) Output - Bridged @ 4‚Ѷ: 190W x 1 Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12db/oct (A/B CH) High-Pass Crossover Frequency: N/A Bass Boost Frequency: 50 Hz Bass Boost Level: 0/6/12dB Audio Specifications Frequency Response: 10Hz ~ 70kHz Total Harmonic Distortion (THD): <0.05 % Signal-to-Noise (SN) Ratio: >95 dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

This 4-Channel Amplifier Unlocks Your Deepest Desire for Power Give into your deepest desire for power. Work it out how you want with the bridgeable amps. Just consider the consequences whatever you do: pure and clean, distortion-free power. The GM-A6704 will ignite your system, but keep the heat under wraps. These amps are techno wonders and will rumble you to the core. Variable High Pass FiltersVariable HPF (High Pass Filter) allows for adjustable frequency between 40 Hz to 500 Hz* and greater car audio system flexibility according to subwoofer characteristics and personal listening preference. Bass BoostBass Boost featured in the GM-A6704 can be set to levels variably from 0 to 12 dB for optimal bass. This precise control can enhance the overall balance and impact of all sounds according to listening preference and music style. Growing Power, Shrinking SizeNew Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. Automatic Signal Sensing & Turn OnPioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level. Pioneer GM-A6704 Features: 1000 Watts Max Power Automatic signal sensing and Turn-ON Variable high pass filter Adjustable bass boost Pioneer GM-A6704 Specifications: General RCA Inputs: 4-CH Amplifier Class: Class AB Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 25A x 2 Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in) Terminal Type: Screw Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 356(W) X 60(H) X 215(D) mm Power Continuous Power (RMS) Output @ 1Ω: N/A Continuous Power (RMS) Output @ 2Ω: 95W x 4 Continuous Power (RMS) Output @ 4Ω: 60W x 4 Continuous Power (RMS) Output - Bridged @ 4Ω: 190W x 2 Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12db/oct (A/B CH) High-Pass Crossover Frequency: 40-500 Hz Bass Boost Frequency: 50Hz Bass Boost Level: 0/6/12dB Audio Specifications Frequency Response: 10Hz ~ 70kHz (+0dB , -3dB) Total Harmonic Distortion (THD): <0.05% ( 10W, 1kHz) Signal-to-Noise (SN) Ratio: > 95dB Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Amplify Your Audio Experience with the New Class-D Amplifier! The Pioneer GM-D9705 is your ‚Äúall-in-one‚Äù solution when looking for additional power. With a compact footprint, speaker line input (and signal sensing turn-on), remote bass control all powered by a ‚ÄúClass-D‚Äù amplifier you have the power in your hands! Packs a PunchThe 5-channel amplifier is rated at 2000 watts max with the A and B channels rated at 75 watts x 4 (RMS) and the subwoofer output rated at 600 watts at 2 (RMS). Compared to similarly priced multichannel amplifiers, the variable crossover networks on the GM-D9705 offer increased flexibility and give listeners more control. Block terminals for a cleaner installation and direct wire contact minimizing resistance. Variable Low Pass FilterFor extra flexibility, a variable LPF makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. The LPF is adjustable from 40 Hz to 240 Hz.Turn Up the BassThe GM-D9705 also features a Bass Boost Remote for optimal bass level adjustment according to listening preferences and music characteristics. Speaker Level InputsWhat, you DON'T own a Pioneer head unit? Well, we won't hold it against you. In fact we'll even help you build onto your system. Speaker level inputs allow simplify integration into existing aftermarket or factory installed (OEM) integrated entertainment systems so you can connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle. Improved Circuit DesignTo prevent circuit shutdown, Pioneer's new digital amplifier circuit ‚ÄúProtection Control System‚Äù senses its internal temperature and automatically moderates input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Œ© connection. This design enhances the flexibility to connect multiple subwoofers to a system.   Features: 2,000 Watts Max Power Block Terminal Variable High Pass and Low Pass Filters Equipped with A/B-SW Input Select Specifications: General RCA Inputs: 5-CH Amplifier Class: CLASS-D Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 30A x 3 Bass Boost Remote: Yes Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 200 mV to 6.5 V Terminal Type: Block Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 302mm (W) x 60mm (H) x 215mm (D) Power Continuous Power (RMS) Output @ 1‚Ѷ: N/A Continuous Power (RMS) Output @ 2‚Ѷ: 100W x 4 (Main channel), 600W x 1 (Subwoofer channel) Continuous Power (RMS) Output @ 4‚Ѷ: 75W x 4 (Main channel), 350W x 1 (Subwoofer channel) Continuous Power (RMS) Output - Bridged @ 4‚Ѷ: 200W x 2 (Main channel), 350W x 1 (Subwoofer channel) Audio Adjustments Low-Pass Crossover Frequency: 40 Hz Low-Pass Slope (dB/octave): -12dB/oct (A/B CH) / -12dB/-24dB (SUB CH) High-Pass Crossover Frequency: 500 Hz Bass Boost Frequency: 50 Hz Bass Boost Level: 0 dB to 18 dB Audio Specifications Frequency Response: A/B CH: 10 Hz ~ 50 kHz (+0dB, -3dB) / SUB CH: 10Hz ~ 500 Hz (+0dB, -3dB) Total Harmonic Distortion (THD): A/B CH: <0.05% (1kHz) / SUB CH: <0.05% (100Hz) Signal-to-Noise (SN) Ratio: > 94dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Rockford Fosgate R2-300X4 Prime 300 Watt 4-Channel Class D Amplifier When four speakers need real power without compromise, the R2-300X4 delivers 300 watts of clean, efficient Class D performance engineered by Rockford Fosgate. Product Overview The R2-300X4 is part of Rockford Fosgate's 3rd generation Prime Series, built for car audio enthusiasts who demand reliable, high-performance amplification at an accessible price. Operating as a full-range Class D 4-channel amplifier, it runs at 4 ohm or 2 ohm stereo and 4 ohm bridged/mono, giving it the flexibility to drive front and rear speaker pairs or reconfigure as a 3-channel or 2-channel setup. Class D topology maximises efficiency and reduces the electrical load on the vehicle's charging system, while MEHSA 4 (Maximum Efficiency Heat Sink Application) actively reduces MOSFET temperatures, lowers distortion, and prolongs output device lifespan. The top-mounted control panel provides independent front and rear controls within easy reach, and CTA-2006 compliant power ratings confirm that the 300W output is a real, tested figure. Designed and engineered in Tempe, Arizona, the R2-300X4 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red for both front and rear) to accurately match the source unit's output to the amplifier's input sensitivity, eliminating guesswork and reducing distortion at the source. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. MEHSA 4 (Maximum Efficiency Heat Sink Application): An advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's outputs and protects against shorting speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. Fully Adjustable Butterworth Crossovers: Independent front and rear 12 dB/octave High-Pass and Low-Pass crossovers, continuously variable from 50 to 250 Hz, with an All-Pass option per channel for full-range output when no filtering is needed. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V) through a 2/4 Channel Input Selection Switch, making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing downstream amplifiers to be added without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-300X4 Series Prime Number of Channels 4 Amplifier Class Class D, Full Range Total RMS Power 300W RMS Power @ 4 Ohm 50W x 4 RMS Power @ 2 Ohm 75W x 4 Bridged Power @ 4 Ohm 150W x 2 Dynamic Power @ 4 Ohm 70W x 4 Dynamic Power @ 2 Ohm 115W x 4 Dynamic Power Bridged @ 4 Ohm 230W x 2 Bridgeable Yes Minimum Impedance (Stereo) 2 Ohm Minimum Impedance (Bridged) 4 Ohm Frequency Response 20 Hz - 20 kHz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input (Front) 4 x RCA low-level, 4-Pin Molex high-level Signal Input (Rear) 4 x RCA low-level, 4-Pin Molex high-level Input Switch 2/4 Channel (RCA and high-level compatible) Signal Output 2 x RCA pass-through (active with RCA or high-level input) Crossover (Front and Rear) High-Pass / Low-Pass: 50-250 Hz @ 12 dB/octave Butterworth All-Pass Yes Tone Controls No Remote Controls No Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT Front (Blue/Red), C.L.E.A.N. OUT Rear (Blue/Red) Operating Voltage 9-16V DC Max Current Draw (13.8V Sinewave) 39A Recommended Fuse 60A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 10.1" (4.9 cm x 17.3 cm x 25.5 cm) Weight 4.75 lbs (2.15 kg) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-300X4 pairs naturally with Rockford Fosgate Prime Series full-range speakers such as the R165X3, R168X2, R169X2, and R169X3 for a matched front and rear speaker setup. For systems requiring low-end support, the rear channels bridge cleanly to drive a single Prime R1 subwoofer such as the R1S410 or R1S412, with the rear crossover set to Low-Pass. A 4-gauge amplifier wiring kit is required for power and ground runs, and 8-gauge cable is needed for speaker outputs. A quality 4-channel RCA interconnect is recommended for clean signal transfer from the head unit. Frequently Asked Questions Can the R2-300X4 be used to power both speakers and a subwoofer in the same system? Yes. The R2-300X4 supports 3-channel configuration, where the front channels power a pair of full-range speakers and the rear channels are bridged to drive a single subwoofer. Setting the rear crossover to Low-Pass rolls off high frequencies to the sub. The minimum impedance of any bridged channel is 4 ohms, so confirm subwoofer impedance before bridging. Does the R2-300X4 require a remote turn-on wire? When using RCA inputs, a remote turn-on wire must be connected to the head unit's remote output. When using high-level speaker inputs, the Auto-Sense bypass switch can be enabled to allow the amplifier to detect an incoming signal and power on automatically, making it compatible with factory head units and systems that lack a dedicated remote output, including those with Retained Accessory Power (RAP). What does the NOMAD protection system do? NOMAD is a real-time analogue computer built into the R2-300X4 that continuously monitors the amplifier's speaker outputs. It protects the amplifier from damage caused by shorted speaker wires and dangerously low speaker impedances, providing active, dynamic protection rather than relying solely on a fuse. What gauge power, ground, and speaker wire does the R2-300X4 require? Rockford Fosgate specifies 4 AWG for power and ground runs using the included compression terminal block connectors. Speaker output connections use 8 AWG wire. The recommended 60A fuse is not included in the box and must be sourced separately, installed as close to the battery as possible. Can the R2-300X4 be bridged into a 2-ohm load for maximum power? No. When bridging the R2-300X4, the minimum supported impedance per bridged output is 4 ohms. Running a bridged channel into a 2-ohm load is not supported and risks amplifier failure or NOMAD-triggered protection shutdown. In standard stereo mode, the minimum impedance per channel is 2 ohms.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

A Combination of Great Design and Massive Power The GM-A4704 amplifier gives you total installation freedom and no distortion. With a one-body heat sink and gain adjustment of up to 6.5V, you can turn your in-car audio experience into the sound staging environment that you’re looking for. This 4-channel amp allows you to drive multiple speakers and subwoofers, it’s also bridgeable to power a single sub. Variable High Pass Filter Variable HPF (high pass filter) allow for adjustable frequency from 40 Hz to 500 Hz* and greater car audio system flexibility according to subwoofer characteristics and personal listening preference. Growing Power, Shrinking Size New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. Automatic Signal Sensing & Turn On Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level. Pioneer GM-A4704 Specifications: General RCA Inputs: 4-CH Amplifier Class: Class AB Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 30A x 1 Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in) Terminal Type: Screw Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 326(W) X 60(H) X 215(D) mm Power Continuous Power (RMS) Output @ 1Ω: N/A Continuous Power (RMS) Output @ 2Ω: 65W x 4 Continuous Power (RMS) Output @ 4Ω: 40W x 4 Continuous Power (RMS) Output - Bridged @ 4Ω: 130W x 2 Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12db/oct (A/B CH) High-Pass Crossover Frequency: 40 Hz to 500 Hz Bass Boost Frequency: 50Hz Bass Boost Level: 0/6/12dB Audio Specifications Frequency Response: 10Hz ~ 70kHz (+0dB , -3dB) Total Harmonic Distortion (THD): <0.05% ( 10W, 1kHz) Signal-to-Noise (SN) Ratio: > 94dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!  

Read more less

8-Channel Car Amplifier with Digital Signal Processing from JBL!The JBL Audio DSP4086 is one of the best ways to get superior sound fidelity in your car. JBL's incredibly compact DSP4086 8-channel amp/processor will do both, providing eight channels of 40 watts RMS while sculpting the sound with powerful tuning software using your Windows PC.Connecting to the whole systemThe DSP4086 was designed to take the signals from your vehicle's front speakers, rear speakers, front center channel, and rear subwoofer. You can then process those signals to create eight powered outputs, and you have the ability to power and control your front tweeters.TuningEvery channel features 31-band EQ, switchable from parametric to graphic; completely variable high-, low-, and band-pass filters with selectable slopes; time delay, up to 12ms in 0.2ms increments; and 0/180¬∞ phase adjustment. You can assign each input to an output, and you can sum signals in order to create a full-range signal to be processed.Features: 8-channel car amplifier with digital signal processing 40 watts RMS x 8 at 4 ohms 60 watts RMS x 8 at 2 ohms DSP and EQ tuning tool adjustments made via USB connection to a Windows PC Save up to 10 presets Inputs: 6 assignable preamp and speaker-level (RCA adapters included) Outputs: 8 powered and processed Adjustment Details 31-band EQ (selectable parametric or graphic) Adjustable high-, low-, and band-pass filters (20-20,000 Hz) Selectable filter slopes 6, 12, 18, 24, 30, 36, 42, 48 dB/octave) Adjustable delay: 0 to 12ms in 0.2ms increments Phase adjustment: 0 or 180¬∞ Programming done by a Windows-run PC Other Features Includes wired remote for ch 7/8 Fuse rating: 40A x 1 Wiring and hardware not included with amplifier 8-gauge power and ground leads recommended Dimensions: 5-11/16‚Ä≥W x 2‚Ä≥H x 9-3/8‚Ä≥D What's in the Box: 8-Channel DSP amplifier w/ attached 6‚Ä≥ 6-RCA input harness Remote bass level control 16.5‚Ä≤ Remote level control cable (RJ-12 connectors both ends) 8‚Ä≥ Power/ground/Rem harness (inline 40A ATO fuse) 8‚Ä≥ 16-Pin speaker output harness 70‚Ä≥ USB Cable (type-A both ends / 2.0) 6 Input adapters (RCA to set-screw) Spare 40A ATO fuse Four 15mm screws Two 10mm screws 4 Large flat-washers 4 Small flat-washers 4 Lock-washers Four 6-1/2‚Ä≥ wire ties Owner's manual (Eng/Span/Fren/Others) Legendary Products & Support From Authorized Dealers When you choose JBL, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JBL dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JBL's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JBL dealer today!

Read more less

Excellent For OEM Systems Upgrade!   D-Class 4-Channel AmplifierThe Hertz DPower4 Car Audio Amplifier is an ultra-compact to ensure effortless installations in the increasingly narrow spaces of modern vehicles or in the factory amp area. The efficient D Class circuit delivers 600W of maximum power within a compact chassis, an essential requirement for in-car integration. The versatile crossover filter of the DPower 4 enables the user to create a front-rear or front + subwoofer system by connecting two channels in bridge mode. The double speaker & RCA inputs allows the DPower4 to connect to any type of source, be it OEM or aftermarket. For an excellent integration with OEM systems the DPower4 is equipped with a smart automated turn on and off circuit according to the factory radio. Legendary Products & Support From Authorized Dealers When you choose HERTZ, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized HERTZ dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by HERTZ's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized HERTZ dealer today!

Read more less

Rockford Fosgate R2-500X4 Prime 500 Watt 4-Channel Full-Range Class-D Car Amplifier A 500W 4-channel Full-Range Class-D car amplifier delivering 125W x 4 at 2-ohm or 250W x 2 at 4-ohm bridged (CTA-2006 rated). Features independent front and rear channel crossover control with all-pass mode, 2/4 channel input selection switch, RCA pass-through outputs, C.L.E.A.N. gain calibration with per-channel output clip indicators, Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management. Designed and engineered in Tempe, Arizona. Backed by a 1 year warranty. Product Overview The Rockford Fosgate R2-500X4 is a 500W 4-channel Full-Range Class-D car amplifier from the Prime R2 series, purpose-built for powering car speaker pairs across the full audio spectrum. Rated continuous power is 75W x 4 at 4-ohm, 125W x 4 at 2-ohm, or 250W x 2 at 4-ohm bridged (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 90W x 4 at 4-ohm, 160W x 4 at 2-ohm, and 300W x 2 at 4-ohm bridged. The R2-500X4 provides independent front and rear channel crossover control, each with fully adjustable high-pass and low-pass filters at 12dB/octave Butterworth (50Hz-250Hz) and an all-pass mode for full-bandwidth output. Independent front and rear variable input gain adjustment is provided. A 2/4 channel input selection switch configures the amplifier for source units with either 2 or 4 RCA outputs, working for both RCA and high-level inputs. RCA pass-through outputs allow downstream amplifier chaining - the R2-750X1 monoblock subwoofer amplifier is the natural companion for a complete car audio system. Auto-Sense turn-on activates the amplifier when a speaker-level signal is detected, with a RAP bypass switch for Retained Accessory Power systems. C.L.E.A.N. provides separate input and output clip indicators for both front and rear channel groups. Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management are all active. Cast aluminium heatsink with convection cooling. Designed and engineered in Tempe, Arizona. Features & Benefits Full-Range Class-D - Efficient 4-Channel Car Audio Amplification: Full-Range Class-D topology delivers high-efficiency power across the complete 20Hz-20kHz audio spectrum, reducing current demand on the vehicle's electrical system while powering speaker pairs with clean, accurate output. Independent Front and Rear Crossover Control with All-Pass Mode: Front and rear channels each have independent high-pass and low-pass crossover controls at 12dB/octave Butterworth (50Hz-250Hz) plus an all-pass mode for full-bandwidth output, giving more flexibility than a single shared crossover. 2/4 Channel Input Selection Switch: The input selection switch configures the R2-500X4 to accept either a 2-channel or 4-channel RCA or high-level input, working with source units that have limited RCA output pairs without requiring Y-cables or signal splitting. Bridgeable to 2-Channel - 250W Mono per Pair: The R2-500X4 can be bridged to 2-channel, delivering 250W x 2 at 4-ohm (300W dynamic), suited to driving higher-power speaker pairs or running a compact 2-channel installation. RCA Pass-Through Outputs for Downstream Chaining: RCA pass-through outputs are active with both RCA and high-level input, allowing the signal to be passed to a downstream subwoofer amplifier such as the R2-750X1 without signal degradation. C.L.E.A.N. Technology - Independent Per-Channel Clip Monitoring: C.L.E.A.N. provides separate input and output clip indicator LEDs for both the front and rear channel groups, enabling accurate independent gain calibration across all four channels. Auto-Sense Turn-On with RAP Bypass: Auto-Sense activates the amplifier automatically when a high-level input signal is detected, removing the need for a dedicated remote turn-on wire. A bypass switch is included for vehicles with Retained Accessory Power systems. Rollback Protection and NOMAD Speaker Protection: Rollback Protection dynamically manages output to prevent thermal stress during sustained high-output conditions. NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. Technical Specs Specification Detail SKU R2-500X4 Number of Channels 4 Total Power 500W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 75W x 4 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 125W x 4 Rated Power - 4-ohm Bridged (CTA-2006) 250W x 2 Dynamic Power - 4-ohm (PowerCube) 90W x 4 Dynamic Power - 2-ohm (PowerCube) 160W x 4 Dynamic Power - 4-ohm Bridged (PowerCube) 300W x 2 Circuit Topology Full-Range Class-D Bridgeable Yes Frequency Response 20 Hz - 20 kHz THD + Noise Less than 1.0% at 4-ohm and 2-ohm Input Sensitivity Low-Level: 150mV - 4V / High-Level: 450mV - 12V Signal Input Front: 4 x RCA + 4-Pin Molex / Rear: 4 x RCA + 4-Pin Molex Input Selection 2/4 Channel Switch (RCA and High-Level) Signal Output 2 x RCA Pass-Thru (active with RCA or High-Level input) Tone Controls None Front High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Front Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth All-Pass Yes Remote Controls None Auto-Sense Turn-On Yes (with RAP bypass switch) Power Wire Gauge 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Cooling Convection Heatsink Cast Aluminium Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 80A Max Current Draw at 13.8V Sinewave 59A Visual Indicators Power: Blue / Protect: Red / C.L.E.A.N. In: Red / C.L.E.A.N. Out Front and Rear: Blue/Red Dimensions (H x W x D) 49 x 173 x 255mm (1.9 x 6.8 x 10.1 inch) CTA-2006 Compliant Yes Warranty 1 Year Compatible With / Goes Well With The R2-500X4 suits car audio builds requiring an efficient 4-channel full-range amplifier for speaker pairs at the Prime R2 price point. At 59A maximum current draw and an 80A fuse requirement, it places moderate demand on the vehicle's electrical system. The RCA pass-through output pairs naturally with the R2-750X1 mono subwoofer amplifier for a complete R2 series speaker and subwoofer system. Goes Well With: R2-750X1 - Companion R2 series 750W mono subwoofer amplifier, chainable via the R2-500X4's RCA pass-through outputs for a complete R2 series car audio system R2-750X5 - Alternative single-unit 5-channel R2 series amplifier for builds requiring an integrated subwoofer channel alongside speaker amplification R2-2X12 / R2-2X10 - Rockford Fosgate Prime dual loaded subwoofer enclosures when paired with the R2-750X1 companion monoblock RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the installation Frequently Asked Questions What is the difference between the R2-500X4 and the R2-750X5? The R2-500X4 is a 4-channel full-range amplifier rated at 125W x 4 at 2-ohm with no dedicated subwoofer channel, no Punch EQ, and no remote level control. The R2-750X5 is a 5-channel amplifier rated at 100W x 4 plus 350W subwoofer at 2-ohm, adding a dedicated subwoofer channel with Punch EQ, infrasonic filter, RLC remote level control, and a 2/4/5 channel input switch. Choose the R2-500X4 for a pure 4-channel speaker amplifier and pair it with the R2-750X1 for subwoofer duty; choose the R2-750X5 for a single-unit 5-channel solution. Can I add a subwoofer amplifier to a system using the R2-500X4? Yes. The R2-500X4 includes RCA pass-through outputs that are active with both RCA and high-level input, allowing a distortion-free signal to be passed to a downstream mono subwoofer amplifier such as the R2-750X1. The two amplifiers chain together cleanly for a complete 4-channel speaker plus mono subwoofer car audio system. What does the 2/4 channel input selection switch do? The input selection switch configures the R2-500X4 to accept either a 2-channel or 4-channel input from the source unit, working for both RCA and high-level connections. In 2-channel mode, the single stereo RCA pair feeds all four channels internally. In 4-channel mode, separate front and rear RCA pairs are used for independent left/right front and rear channel control. What fuse does the R2-500X4 require and is it included? The R2-500X4 requires an 80A fuse, which is not included and must be sourced separately. This is smaller than the 120A fuse required by the R2-750X5 and R2-750X1, reflecting the R2-500X4's lower maximum current draw of 59A. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Does the R2-500X4 need a dedicated remote turn-on wire? Not necessarily. Auto-Sense activates the amplifier automatically when a high-level speaker signal is detected at the input, removing the need for a separate remote wire in OEM integration scenarios. A RAP bypass switch is included for vehicles where the source unit continues to output a signal after the ignition is switched off.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-200X2 Prime 200 Watt 2-Channel Class D Amplifier When two channels need real power without compromise, the R2-200X2 delivers 200 watts of clean, efficient Class D performance engineered by Rockford Fosgate. Product Overview The R2-200X2 is part of Rockford Fosgate's 3rd generation Prime Series, built for car audio enthusiasts who demand reliable, high-performance amplification at an accessible price. Operating as a full-range Class D 2-channel amplifier, it runs at 4 ohm or 2 ohm stereo and 4 ohm bridged/mono, giving it the flexibility to drive a front speaker pair in stereo or bridge down to a single channel to power a subwoofer. Class D topology maximises efficiency and reduces the electrical load on the vehicle's charging system, while MEHSA 4 (Maximum Efficiency Heat Sink Application) actively reduces MOSFET temperatures, lowers distortion, and prolongs output device lifespan. The top-mounted control panel keeps all adjustments within easy reach, and CTA-2006 compliant power ratings confirm that the 200W output is a real, tested figure. Designed and engineered in Tempe, Arizona, the R2-200X2 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red) to accurately match the source unit's output to the amplifier's input sensitivity, eliminating guesswork and reducing distortion at the source. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. MEHSA 4 (Maximum Efficiency Heat Sink Application): Advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's outputs and protects against shorting speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. Fully Adjustable Butterworth Crossovers: 12 dB/octave High-Pass and Low-Pass crossovers, continuously variable from 50 to 250 Hz, with an All-Pass option for full-range output when no filtering is needed. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V), making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing a downstream amplifier to be added without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-200X2 Series Prime Number of Channels 2 Amplifier Class Class D, Full Range Total RMS Power 200W RMS Power @ 4 Ohm 50W x 2 RMS Power @ 2 Ohm 100W x 2 Bridged Power @ 4 Ohm 200W x 1 Dynamic Power @ 4 Ohm 60W x 2 Dynamic Power @ 2 Ohm 107W x 2 Dynamic Power Bridged @ 4 Ohm 215W x 1 Bridgeable Yes Minimum Impedance (Stereo) 2 Ohm Minimum Impedance (Bridged) 4 Ohm Frequency Response 20 Hz - 20 kHz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input 2 x RCA low-level, 4-Pin Molex high-level Signal Output 2 x RCA pass-through (active with RCA or high-level input) Crossover High-Pass / Low-Pass: 50-250 Hz @ 12 dB/octave Butterworth All-Pass Yes Tone Controls No Remote Controls No Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT (Blue/Red) Operating Voltage 9-16V DC Max Current Draw (13.8V Sinewave) 18A Recommended Fuse 30A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 8.1" (4.9 cm x 17.3 cm x 20.5 cm) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-200X2 pairs naturally with Rockford Fosgate Prime Series full-range speakers such as the R165X3, R168X2, R169X2, and R169X3 for a front stereo speaker setup. When bridged to mono at 4 ohms, it can also serve as a dedicated subwoofer channel, making it a compact single-amplifier solution for smaller builds. For systems requiring both speaker and dedicated subwoofer amplification, the R2-200X2 pairs directly with the R2-250X1 monoblock using the onboard RCA pass-through. A 4-gauge amplifier wiring kit is required for power and ground runs, and 8-gauge cable is needed for speaker outputs. Frequently Asked Questions Can the R2-200X2 power both front speakers and a subwoofer at the same time? Not simultaneously through both channels. In stereo mode, the R2-200X2 powers two speakers independently. When bridged to mono, it delivers 200 watts into a single 4-ohm load, suitable for a subwoofer, but the stereo channels are no longer available in that configuration. For a system requiring both speaker and subwoofer amplification, pairing the R2-200X2 with a dedicated monoblock such as the R2-250X1 is the recommended approach. Does the R2-200X2 require a remote turn-on wire? When using RCA inputs, a remote turn-on wire must be connected to the head unit's remote output. When using high-level speaker inputs, the Auto-Sense bypass switch can be enabled to allow the amplifier to detect an incoming signal and power on automatically, making it compatible with factory head units and systems that lack a dedicated remote output, including those with Retained Accessory Power (RAP). What does the NOMAD protection system do? NOMAD is a real-time analogue computer built into the R2-200X2 that continuously monitors the amplifier's speaker outputs. It protects the amplifier from damage caused by shorted speaker wires and dangerously low speaker impedances, providing active, dynamic protection rather than relying solely on a fuse. What gauge power, ground, and speaker wire does the R2-200X2 require? Rockford Fosgate specifies 4 AWG for power and ground runs using the onboard compression terminal block connectors. Speaker output connections require 8 AWG wire. The recommended 30A fuse is not included in the box and must be sourced separately, installed as close to the battery as possible. Can the R2-200X2 be bridged into a 2-ohm load for maximum power? No. When bridging the R2-200X2, the minimum supported impedance is 4 ohms. Running a bridged output into a 2-ohm load is not supported and risks amplifier failure or NOMAD-triggered protection shutdown. In standard stereo mode, the minimum impedance per channel is 2 ohms. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Four channels. One serious upgrade. Product Overview The Infinity REF3004A is a full-featured 4 channel car amplifier built for Aussie drivers who want real, usable power without filling the boot with gear. Delivering 75W RMS per channel at 4 ohms or 200W RMS per channel in 2-channel bridged mode this amplifier is versatile enough to run front and rear speakers today and transition to subwoofer duty when you're ready to add a dedicated sub amp down the track. Designed to slot into virtually any system, the REF3004A features both preamp and speaker-level inputs, so it works just as well in a factory-stereo setup as it does with an aftermarket headunit. Independent high and low-pass filters on the front and rear channels let you dial in your sound properly no guesswork, no compromise. Key Specifications 75W RMS x 4 channels at 4 ohms 100W RMS x 4 channels at 2 ohms 200W RMS x 2 channels at 4 ohms (bridged mode) 4-ohm stable in bridged configuration Variable high-pass and low-pass filters: 32–320Hz, 12dB/octave Filters operate independently on front and rear channels Preamp and speaker-level inputs included Preamp outputs for daisy-chaining additional amplifiers Fuse rating: 30A x 2 (two 30A fuses) Recommended power and ground lead: 8-gauge Wiring and hardware not included Features & Benefits Flexible power modes: Run four speakers at 75W RMS each for a full-system build, or bridge to 2-channel at 200W RMS to power a pair of subwoofers. One amp, multiple system configurations. Speaker-level inputs: Connects directly to factory headunit speaker outputs, making this ideal for Aussie utes, SUVs, and 4WDs that still have the OEM head unit in place. Independent variable filters: Separate high and low-pass filters on front and rear channels (32–320Hz, 12dB/octave) mean you're not locked into a one-size-fits-all crossover point. Dial in your door speakers and dash separately. Preamp outputs: Future-proof your system. Add a dedicated sub amp or processor later without rewiring the whole install. Compact form factor: At 320 x 180mm footprint, it tucks neatly under a seat or into a tight boot space a practical win on wagons, dual-cabs, and touring builds. Dual 30A fuse protection: Built-in protection helps safeguard your system on corrugated outback roads and long touring runs where electrical stability matters. Technical Specs Channels: 4 (stereo) / 2 (bridged) RMS Power (4Ω, 4ch): 75W x 4 RMS Power (2Ω, 4ch): 100W x 4 RMS Power (4Ω, bridged): 200W x 2 Bridged impedance stability: 4 ohms minimum High-pass filter range: 32–320Hz, 12dB/octave Low-pass filter range: 32–320Hz, 12dB/octave Filter assignment: Independent front and rear channels Inputs: Preamp (RCA) + Speaker-level Outputs: Preamp (RCA) Fuse: 30A x 2 Recommended power/ground wire gauge: 8 AWG (8-gauge) Dimensions (W x H x D): 320mm x 55.5mm x 180mm Wiring kit: Not included Compatible With Any vehicle with factory or aftermarket headunit (speaker-level inputs allow OEM compatibility) Suitable for passenger cars, utes, SUVs, wagons, and 4WDs Pairs well with Infinity Reference Series component or coaxial speakers Works with 4-ohm or 2-ohm speaker loads (4-channel mode) Compatible with 4-ohm subwoofers in bridged mode Recommended to pair with a dedicated 8-gauge amplifier wiring kit (sold separately) Can be paired with a separate mono subwoofer amplifier using the preamp outputs Frequently Asked Questions Does the REF3004A work with a factory (OEM) headunit? Yes. The built-in speaker-level inputs allow you to connect this amplifier directly to the factory headunit's speaker outputs no RCA outputs required on the source unit. Can I use this amp to power subwoofers? Yes. In bridged 2-channel mode, the REF3004A delivers 200W RMS per channel at 4 ohms, making it capable of driving a pair of 4-ohm subwoofers. Note: bridged mode requires a 4-ohm minimum load. Do I need a separate wiring kit? Yes. Wiring and hardware are not included. Infinity recommends 8-gauge power and ground leads. A quality 8-gauge amplifier wiring kit is required for correct and safe installation. What is the physical size of the REF3004A? The amplifier measures 320mm wide x 55.5mm high x 180mm deep compact enough to fit under most seats or in a standard boot install alongside other gear. Can I add another amplifier using the preamp outputs? Yes. The REF3004A includes preamp (RCA) outputs, allowing you to pass signal to a second amplifier such as a dedicated mono sub amp without the need for an additional signal splitter. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03104-00 MHD Marine Amplifier - 4 Channel Full-Range 24V Marine Amplifier Professional 24-volt marine amplification with IP67 protection — MHD 4-channel amplifier delivers 150 watts per channel with Class-D efficiency and advanced signal processing for commercial vessels, charter boats, and larger yachts operating 24V electrical systems across Australian waters. Product Overview The JL Audio MHD 4-channel marine amplifier delivers professional-grade audio amplification specifically engineered for 24-volt marine electrical systems with 150 watts RMS per channel at 4Ω impedance (300 watts bridged) and 600 watts total continuous power output. Designed with full IP67 dust and water ingress protection, this Class-D amplifier features variable high-pass and low-pass filters with selectable 12/24 dB per octave slopes, detented calibrated crossover controls, switchable 2-channel or 4-channel input modes, and optional HD-RLC remote level control compatibility. Operating across 22-29V DC voltage range with comprehensive thermal, overload, and short-circuit protection, the compact chassis (273mm x 199mm x 49mm) enables professional installation in equipment compartments, helm consoles, or below-deck locations. Compatible with JL Audio MediaMaster source units, M3/M6 marine speakers, marine subwoofers, and enclosed tower systems, this amplifier serves commercial fishing vessels, charter boats, larger recreational yachts, and marine applications requiring robust 24-volt amplification with three-year warranty coverage. Features & Benefits 24-Volt Marine System Optimization: Specifically engineered for 24V DC electrical systems (22-29V operating range) common in commercial vessels, larger yachts, and professional marine applications, delivering consistent 150W x 4 RMS power output at both 4Ω and 2Ω loads across voltage fluctuations typical in marine environments. Complete IP67 Environmental Protection: Full dust and water ingress protection withstands direct saltwater spray, submersion during washdown, bilge water exposure, and harsh marine conditions without requiring additional protective enclosures, ensuring reliable operation in demanding Australian coastal and offshore environments with three-year warranty coverage. Advanced Class-D Efficiency: High-efficiency Class-D topology minimizes heat generation and power consumption while delivering maximum output capability, reducing strain on vessel electrical systems and enabling compact chassis design fitting tight installation spaces common in marine equipment compartments. Professional Signal Processing: Variable high-pass and low-pass filters with selectable 12/24 dB per octave slopes and 50-500 Hz frequency range enable precise speaker and subwoofer integration, while detented calibrated potentiometers provide accurate repeatable crossover settings for professional system tuning and multi-amplifier installations. Flexible Channel Configuration: Switchable 2-channel or 4-channel input modes with bridged output capability (300W x 2) accommodate diverse system architectures from simple stereo installations to complex multi-zone configurations, while buffered pass-through preamp outputs enable daisy-chaining multiple amplifiers for expanded systems. Remote Level Control Ready: Optional HD-RLC remote level control compatibility (2-channel or all-channels mode) provides convenient volume adjustment from helm, cockpit, or cabin positions without accessing amplifier controls in equipment compartments, simplifying operation during underway conditions. Technical Specs Specification Details Model MHD 4-Channel (24V System) Amplifier Class Class-D Channels 4-channel full-range Total Power Output 600W RMS continuous RMS Power @ 4Ω 150W x 4 (28.8V input, <1% THD) RMS Power @ 2Ω 150W x 4 (28.8V input, <1% THD) Bridged Power @ 4Ω 300W x 2 Operating Voltage 22-29V DC (24V systems) Physical Dimensions 273mm W x 199mm D x 49mm H (10.74" x 7.85" x 1.93") Weight Approximately 3.0 kg (6.6 lbs) Dust/Water Rating IP67 (full protection) Signal-to-Noise Ratio >110 dB below rated power (A-weighted) Damping Factor @ 4Ω >300 at 50 Hz Damping Factor @ 2Ω >150 at 50 Hz THD+N @ Rated Power <0.03% @ 4Ω Frequency Response 6 Hz - 30 kHz (+0, -1dB) Input Voltage Range Switchable: 200mV-2V RMS (low) or 800mV-8V RMS (high) Filter Modes (Ch 1-4) Off, Low-Pass, or High-Pass Filter Slopes Selectable 12/24 dB per octave Filter Frequency Range 50 Hz - 500 Hz Crossover Controls Detented calibrated potentiometers Channel Input Mode Switchable 2/4 channels Preamp Outputs Buffered pass-through with source selection Remote Level Control Optional HD-RLC (2 or all channels) Fuse Rating (24V) 25 amps Recommended Fuse Type AFS, AGU, or MaxiFuse Power Wire Gauge Minimum 4 AWG copper Warranty 3 years manufacturer warranty Compatible With / Goes Well With JL Audio Marine Speakers: M3 marine speakers (6.5", 7.7", 8.8" coaxials), M6 marine speakers (6.5", 7.7", 8.8" coaxials), M3/M6 enclosed tower speakers receiving 150W RMS per speaker for high-output marine audio across commercial and recreational vessels. JL Audio Marine Subwoofers: M3 marine subwoofers, M6 marine subwoofers (8" and 10"), M6 marine thin-line subwoofers, M7 marine subwoofers running in bridged mode (300W x 2) for dedicated low-frequency reinforcement in multi-amplifier systems. JL Audio Source Units: MediaMaster 105 marine stereo, MediaMaster 55 marine stereo, JL Audio marine receivers with 4-volt preamp outputs providing high-voltage signal transmission for optimal noise rejection and amplifier matching. Tower Speaker Systems: JL Audio VeX enclosed tower systems, M3/M6 enclosed tower speakers requiring high-power amplification for wakeboarding, water sports, and offshore entertainment with long cable runs to tower-mounted speakers. Installation Accessories: 24V marine-grade amplifier wiring kits (4-gauge minimum), 25A fuses (AFS/AGU/MaxiFuse), marine distribution blocks, HD-RLC remote level control, waterproof RCA cables, sealed wire connectors for professional 24V system integration. Frequently Asked Questions Why would I need a 24-volt amplifier instead of 12-volt? 24-volt electrical systems are standard in larger commercial vessels, charter boats, and yachts over 40 feet requiring increased electrical capacity for house loads, navigation equipment, and multiple high-power accessories. The 24V MHD amplifier integrates directly with these vessel electrical systems without requiring voltage converters or dual-battery configurations. Can this amplifier be used in 12-volt systems? No, the 24V model (JLA-010-03104-00) is specifically engineered for 22-29V DC operation and cannot be used in 12V systems. JL Audio offers separate 12V MHD models for standard marine applications. Verify your vessel's electrical system voltage before purchasing. What's the advantage of IP67 rating over standard marine amplifiers? IP67 provides complete protection against dust ingress and submersion up to 1 meter for 30 minutes, exceeding typical marine "water-resistant" ratings. This enables installation in exposed locations, bilge areas, or equipment compartments subject to washdown without additional protective enclosures. Can I bridge all four channels to create two 600W outputs? No, bridging creates two channels at 300W each (600W total). Channels 1+2 bridge together and channels 3+4 bridge together, each delivering 300W RMS at 4Ω impedance. This configuration is ideal for powering two subwoofers or two high-power speaker pairs. Do I need the optional HD-RLC remote level control? The HD-RLC is optional but recommended for convenient volume adjustment from helm or cockpit positions without accessing amplifier controls in equipment compartments. It can control either 2 channels or all 4 channels simultaneously, depending on your preference and system configuration.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03103-00 MHD Marine Amplifier - 5 Channel Full-Range Marine System Amplifier Complete marine audio solution with integrated subwoofer power — MHD 5-channel amplifier delivers 100 watts per speaker plus 500-watt dedicated subwoofer channel with Class-D efficiency and IP67 protection for single-amplifier system installations across Australian offshore vessels. Product Overview The JL Audio MHD 5-channel marine amplifier delivers complete audio system amplification from single chassis with 100 watts RMS per channel across four main speaker outputs (75W @ 2Ω) plus dedicated 500-watt RMS subwoofer channel for total 900-watt continuous power output. Designed with full IP67 dust and water ingress protection, this Class-D amplifier features independent high-pass filters for main channels (50-500 Hz, 12/24 dB slopes) and low-pass filter for subwoofer channel with defeatable 30 Hz infrasonic protection. Operating across 11-14.5V DC voltage range with switchable 2/4/6 channel input modes, optional HD-RLC remote subwoofer level control, and buffered pass-through preamp outputs, the compact chassis (273mm x 199mm x 49mm) simplifies installation by eliminating need for multiple amplifiers in complete speaker-plus-subwoofer marine audio systems. Compatible with JL Audio MediaMaster source units, M3/M6 marine speakers, marine subwoofers, and enclosed tower systems, this single-amplifier solution serves recreational boats, fishing vessels, and center console applications requiring professional system integration with three-year warranty coverage. Features & Benefits Complete Single-Amplifier Solution: Integrated 4-channel speaker amplification (100W x 4 @ 4Ω) plus dedicated 500W monoblock subwoofer channel eliminates need for separate speaker and subwoofer amplifiers, simplifying installation, reducing equipment costs, and minimizing space requirements in helm consoles and equipment compartments. Dedicated Subwoofer Channel Architecture: Independent 500-watt monoblock subwoofer output with dedicated low-pass filter (50-500 Hz, 12/24 dB slopes), defeatable 30 Hz infrasonic protection, and HD-RLC remote level control compatibility enables precise bass management separate from main speaker channels optimizing low-frequency performance. Complete IP67 Environmental Protection: Full dust and water ingress protection withstands direct saltwater spray, submersion during washdown, bilge water exposure, and harsh marine conditions without requiring additional protective enclosures, ensuring reliable operation in demanding Australian coastal and offshore environments with three-year warranty coverage. Advanced Class-D Efficiency: High-efficiency Class-D topology delivers 900 watts total continuous output while minimizing heat generation and electrical system strain, reducing current draw from vessel batteries and enabling compact chassis design fitting tight installation spaces common in marine equipment compartments. Independent Channel Processing: Main channels (1-4) feature high-pass only filtering protecting speakers from damaging low frequencies, while subwoofer channel provides low-pass filtering with infrasonic protection, enabling optimal frequency distribution between full-range speakers and dedicated subwoofer without requiring external crossovers or processors. Flexible Input Configuration: Switchable 2/4/6 channel input modes accommodate stereo source units, multi-zone installations, or bi-amped configurations, while buffered pass-through preamp outputs enable daisy-chaining additional amplifiers for expanded systems requiring tower speakers, cabin zones, or additional subwoofers. Technical Specs Specification Details Model MHD 5-Channel (12V System) Amplifier Class Class-D Channels 5-channel (4 main + 1 subwoofer) Total Power Output 900W RMS continuous Main Channels @ 4Ω 100W x 4 (14.4V input, <1% THD) Main Channels @ 2Ω 75W x 4 (14.4V input, <1% THD) Subwoofer Channel @ 4Ω 500W x 1 (14.4V input, <1% THD) Subwoofer Channel @ 2Ω 500W x 1 (14.4V input, <1% THD) Operating Voltage 11-14.5V DC (12V systems) Physical Dimensions 273mm W x 199mm D x 49mm H (10.74" x 7.85" x 1.93") Weight 3.11 kg (6.85 lbs) Dust/Water Rating IP67 (full protection) Signal-to-Noise Ratio >108.5 dB below rated power (A-weighted) Damping Factor @ 4Ω >400 at 50 Hz Damping Factor @ 2Ω >200 at 50 Hz THD+N (Main Channels) <0.03% @ 4Ω THD+N (Sub Channel) <0.05% @ 4Ω Frequency Response (Main) 12 Hz - 28 kHz (+0, -1dB) Frequency Response (Sub) 12 Hz - 10 kHz (+0, -1dB) Input Voltage Range Switchable: 200mV-2V RMS (low) or 800mV-8V RMS (high) Main Channels Filter High-pass only (50-500 Hz, 12/24 dB) Subwoofer Filter Low-pass only (50-500 Hz, 12/24 dB) Infrasonic Filter 30 Hz, defeatable (subwoofer channel) Crossover Controls Detented calibrated potentiometers Channel Input Mode Switchable 2/4/6 channels Preamp Outputs Buffered pass-through Remote Level Control Optional HD-RLC (subwoofer channel only) Fuse Rating 60 amps Recommended Fuse Type AFS, AGU, or MaxiFuse Power Wire Gauge Minimum 4 AWG copper Warranty 3 years manufacturer warranty Compatible With / Goes Well With JL Audio Marine Speakers: M3 marine speakers (6.5", 7.7", 8.8" coaxials), M6 marine speakers (6.5", 7.7", 8.8" coaxials), M3/M6 enclosed tower speakers receiving 75-100W RMS per speaker across four main channels for complete full-range reproduction. JL Audio Marine Subwoofers: M3 marine subwoofers, M6 marine subwoofers (8" and 10"), M6 marine thin-line subwoofers, M7 marine subwoofers receiving dedicated 500W RMS monoblock power from integrated subwoofer channel with optimized low-pass filtering and infrasonic protection. JL Audio Source Units: MediaMaster 105 marine stereo, MediaMaster 55 marine stereo (MM55 and MM55-HR models), JL Audio marine receivers with 4-volt preamp outputs providing high-voltage signal transmission for optimal noise rejection and six-channel audio distribution. Tower Speaker Systems: JL Audio VeX enclosed tower systems, M3/M6 enclosed tower speakers powered from main channels or connected via pass-through preamp outputs to additional amplifiers for expanded multi-zone installations. Installation Accessories: Marine-grade amplifier wiring kits (4-gauge minimum), 60A fuses (AFS/AGU/MaxiFuse), marine distribution blocks, HD-RLC remote subwoofer level control, waterproof RCA cables, sealed wire connectors for professional complete-system integration. Frequently Asked Questions Why choose a 5-channel amplifier instead of separate speaker and subwoofer amplifiers? The 5-channel design simplifies installation by consolidating all amplification into single chassis, reducing equipment costs, minimizing space requirements, eliminating redundant power/ground wiring, and providing matched amplification characteristics across entire audio system. Ideal for boats where space and simplicity are priorities. Can I use the main channels to power four speakers plus add more speakers later? Yes, the buffered pass-through preamp outputs enable connection of additional amplifiers for tower speakers, cabin zones, or expanded systems. The main four channels directly power your primary speaker set while preamp outputs feed signals to external amplifiers for system expansion. How does the subwoofer channel differ from bridged 4-channel amplifiers? The dedicated subwoofer channel provides true monoblock architecture with optimized low-frequency performance (12-10 kHz response), dedicated low-pass filtering, defeatable 30 Hz infrasonic protection, and independent remote level control—features unavailable in bridged 4-channel configurations delivering inferior subwoofer performance. What's the advantage of IP67 rating over standard marine amplifiers? IP67 provides complete protection against dust ingress and submersion up to 1 meter for 30 minutes, exceeding typical marine "water-resistant" ratings. This enables installation in exposed locations, bilge areas, or equipment compartments subject to washdown without additional protective enclosures. Can the HD-RLC remote control adjust both speaker and subwoofer levels? No, the HD-RLC on 5-channel models controls subwoofer level only, allowing convenient bass adjustment from helm or cockpit positions without affecting main speaker volumes. This is the most common use case—adjusting bass output without touching overall system volume.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less