Rockford Fosgate PBR400X4D Punch 400 Watt 4-Channel Class D Amplifier When space is tight but power cannot be compromised, the PBR400X4D delivers 400 watts of full-range Punch Series performance in one of the most compact 4-channel footprints Rockford Fosgate makes. Product Overview The PBR400X4D is a full-range Class D 4-channel amplifier from Rockford Fosgate's Punch Series, engineered specifically for installations where space is at a premium. Powered by Boosted Rail Technology (BRT), an ultra-efficient proprietary power supply design, it generates 400 watts of total RMS output while keeping current draw low enough to suit trucks, sub-compact vehicles, electric vehicles, and hybrids where electrical system demand is a critical consideration. The amplifier operates at 4 ohm or 2 ohm stereo and 4 ohm bridged/mono, with selectable fixed 12 dB/octave Butterworth crossovers covering High-Pass and Low-Pass filter positions. A variable DC offset high-level input circuit with signal-sense turn-on simplifies integration with OEM head units and factory systems. MEHSA3 thermal management handles heat dissipation through an extruded aluminium heatsink, while real-time output and power supply thermal sensing monitors operating conditions continuously. The C.L.E.A.N. clip detection system uses a tri-colour LED indicator that identifies exact THD levels rather than just clipping events, giving a precise read on signal quality. Muted turn-on prevents transient noise through the speakers during power-up. CEA-2006 and CE compliant, with a 1-year warranty, designed and engineered in the USA. Features & Benefits Boosted Rail Technology (BRT): Rockford Fosgate's proprietary ultra-efficient power supply design generates 400 watts of output while minimising current consumption from the vehicle's charging system, making the PBR400X4D well suited to electric, hybrid, and sub-compact vehicles where alternator and battery capacity is limited. C.L.E.A.N. Clip Detection with Tri-Colour LED: The C.L.E.A.N. input and output clip indicator uses a three-colour LED system to provide precise distortion feedback: Blue indicates less than 0.5% THD (clean signal), Violet indicates 1% THD (approaching clip), and Red indicates 10% THD or greater (clipping). This is a more detailed read of signal quality than a standard clip light. MEHSA3 (Maximum Efficiency Heat Sink Application): Reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use, working in combination with the extruded aluminium heatsink for convection cooling. Real-Time Thermal Sensing: Continuous monitoring of both the output stage and power supply thermal conditions allows the amplifier to respond to temperature changes proactively, protecting internal components during demanding listening sessions. DSM Circuit Technology: 1% tight-tolerance surface-mount components improve circuit efficiency, reduce crosstalk between discrete components, and lower operating temperature throughout the signal path. Variable DC Offset High-Level Turn-On: The hi-level input includes a variable DC offset sensitivity circuit for reliable signal-sense turn-on across a wide range of factory head units and OEM systems, with no remote turn-on wire required when using high-level inputs. Remote-Out Feature: When using high-level inputs, the PBR400X4D provides a Remote-Out signal that can be used to trigger downstream components, simplifying multi-component installations without a separate remote turn-on distribution. Selectable Fixed Crossovers: High-Pass crossover is selectable at 60 Hz or 80 Hz at 12 dB/octave Butterworth. Low-Pass crossover is fixed at 80 Hz at 12 dB/octave Butterworth, providing straightforward speaker and subwoofer integration without continuous adjustment. 2/4 Channel Input Switch: A 2-channel to 4-channel input switch allows a single stereo RCA source to feed all four output channels, simplifying installation in vehicles with limited source unit outputs. Compact Stealth Design: At 1.53" x 4.25" x 6.75", the PBR400X4D is designed for concealed installations in tight spaces, including under seats, behind panels, and in factory amplifier locations. Muted Turn-On: Output is muted during the power-up sequence to prevent transient noise from passing through the speakers at switch-on. CEA-2006 and CE Compliant: All power ratings conform to CEA-2006 industry measurement standards at 14.4V with 1% or less THD. No inflated peak figures are used anywhere in the specifications. Technical Specs Specification Detail SKU PBR400X4D Series Punch Number of Channels 4 Amplifier Class Class D, Full Range Total RMS Power 400W RMS Power @ 4 Ohm 50W x 4 RMS Power @ 2 Ohm 100W x 4 Bridged Power @ 4 Ohm 200W x 2 Dynamic Power @ 4 Ohm 75W x 4 Dynamic Power @ 2 Ohm 130W x 4 Dynamic Power Bridged @ 4 Ohm 270W x 2 Bridgeable Yes Minimum Impedance (Stereo) 2 Ohm Minimum Impedance (Bridged) 4 Ohm Frequency Response 20 Hz - 20 kHz +/- 1 dB THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% Average Efficiency >75% Input Sensitivity 150 mV - 12V Signal Input (Low-Level) 2 x Pair RCA Signal Input (High-Level) 4-Pin Harness, variable DC offset sensitivity Input Switch 2-channel / 4-channel Signal Output None High-Pass Crossover 60 Hz or 80 Hz @ 12 dB/octave Butterworth (selectable) Low-Pass Crossover 80 Hz @ 12 dB/octave Butterworth (fixed) Tone Controls None Remote Controls None Visual Indicators POWER (Blue), PROTECT (Red), INPUT CLIP (Red), OUTPUT CLIP (Blue/Violet/Red) LED Colour Legend Blue: <0.5% THD, Violet: 1% THD, Red: 10% THD or greater Operating Voltage 9-16V DC Average Current Draw (13.8V Music) 27A Max Current Draw (13.8V Sinewave) 50A Suggested Alternator 75A Recommended Fuse 60A (not included) Power Wire Gauge 8 AWG Speaker Wire Gauge 16 AWG Power Input Connector Detachable Compression Terminal Speaker Output Connector Front: 4-Pin Harness, Rear: 4-Pin Harness Cooling Convection / Extruded Aluminium Heatsink (MEHSA3) Dimensions (H x W x D) 1.53" x 4.25" x 6.75" (3.9 cm x 10.79 cm x 17.16 cm) Shipping Weight 3.1 lbs (1.4 kg) Warranty 1 Year Compliance CEA-2006, CE Goes Well With The PBR400X4D pairs naturally with Rockford Fosgate Punch Series full-range speakers across the front and rear channels, including the P1 and P2 coaxial and component speaker ranges. When bridged to 2-channel operation at 4 ohms, it can also serve as a compact, space-saving subwoofer amplifier in smaller builds. For systems requiring a dedicated subwoofer channel alongside speaker amplification, the onboard 80 Hz Low-Pass crossover option makes it straightforward to cross over rear channels to a subwoofer. Note that this amplifier uses 4-pin harness speaker connectors rather than standard terminal blocks; confirm harness compatibility with the installation vehicle before purchase. An 8-gauge amplifier wiring kit is required for power and ground runs. Frequently Asked Questions What does Boosted Rail Technology (BRT) mean, and why does it matter for electric or hybrid vehicles? Boosted Rail Technology is Rockford Fosgate's proprietary ultra-efficient power supply architecture used in the PBR400X4D. It generates 400 watts of output while keeping current draw significantly lower than a conventional Class AB amplifier of equivalent power. At 13.8V music, average current draw is just 27A, and the suggested alternator rating is 75A. This makes the PBR400X4D well suited to electric vehicles, hybrids, and sub-compact vehicles where the electrical system capacity is more restricted than a conventional petrol-powered vehicle. Does the PBR400X4D need a remote turn-on wire? When using high-level speaker inputs, no remote turn-on wire is required. The variable DC offset high-level input circuit detects the incoming speaker signal automatically and powers the amplifier on. When using RCA inputs, a standard remote turn-on wire from the head unit is required. Additionally, the Remote-Out feature provides a trigger output when the amplifier is running from high-level inputs, which can be used to activate downstream components. What does the tri-colour output clip LED indicate, and how is it different from a standard clip light? The PBR400X4D's C.L.E.A.N. output clip indicator uses three colour states rather than a simple on/off clip light. Blue indicates the signal is clean at less than 0.5% THD. Violet indicates the signal is approaching the clip threshold at 1% THD. Red indicates the signal is clipping at 10% THD or greater. This tri-colour system allows gain to be set more accurately during installation without an external measurement tool. Are the crossover points adjustable, or are they fixed? The crossover points on the PBR400X4D are selectable but fixed, not continuously variable. The High-Pass crossover can be set to either 60 Hz or 80 Hz. The Low-Pass crossover is fixed at 80 Hz. All crossovers operate at 12 dB/octave Butterworth slope. For installations requiring precise variable crossover control, an upstream DSP such as the DSR1 would be needed. What speaker connector type does the PBR400X4D use, and do I need a special harness? The PBR400X4D uses 4-pin harness connectors for both front and rear speaker outputs rather than standard screw or compression terminal blocks. This is part of the compact, stealth-install design. Confirm that compatible 4-pin speaker harnesses are available for the installation vehicle or amplifier location before purchase, as standard bare-wire speaker connections are not supported directly on this amplifier. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P600X4 600 Watts, Four Channels, Built for Any System You Throw at It Product Overview The Rockford Fosgate P600X4 is a Punch Series 4-channel amplifier rated at 150 watts RMS per channel at 2 ohms 600 watts total engineered to adapt to virtually any car audio system layout. Run it in full 4-channel stereo for front and rear speakers, bridge both channel pairs into a high-power 2-channel configuration, or operate it in 3-channel mode with stereo speakers up front and a subwoofer on the bridged rear channels. The P600X4 handles all three without compromise. What sets the P600X4 apart from entry-level 4-channel options is its expanded feature set. RCA pass-thru outputs let you chain additional amplifiers as your system grows without resorting to Y-adapters that degrade signal quality. The optional PLC2 remote Punch Level Control adds a dash-mounted bass adjustment knob with a real-time clip indicator, and the variable HP/LP Butterworth crossover gives you precise per-channel tuning for speakers and subwoofers alike. For Australian builds dealing with heat, corrugations, and long-distance touring, the cast aluminium heatsink and onboard protection circuits keep everything running cleanly. Key Specifications Total RMS Output: 600 watts Per-Channel Output: 150W x 4 at 2 ohms Channels: 4 (stereo, 3-channel, or bridged 2-channel) Bridgeable: Yes — bridge both channel pairs for high-power 2-channel operation Crossover: Variable HP/LP, 12dB/octave Butterworth Onboard EQ: Punch EQ — +18dB boost at 45Hz Inputs: High-level (speaker-level) and RCA RCA Pass-Thru Outputs: Yes Auto Turn-On: Yes — via high-level input detection Remote Control: Optional PLC2 Punch Level Control (with input clip indicator) Turn-On Behaviour: Muted (no thump on startup) Heatsink: Cast aluminium Control Panel Position: Stealth top-mounted Protection: Short circuit and over-current Features & Benefits High-Level Input with Auto Turn-On — Connects directly to factory head unit speaker outputs with no RCA cables required. The Auto Turn-On circuit fires the amp when it detects a signal, eliminating the need for a dedicated remote turn-on wire. Ideal for OEM upgrades across any vehicle. RCA Pass-Thru Outputs — Extend your system by daisy-chaining a subwoofer amplifier or additional channels without Y-adapters. Keeps signal integrity intact and your wiring clean as your build evolves. C.L.E.A.N. Setup (Clip Level Elimination Audio Notify) — Rockford Fosgate's onboard gain-calibration system takes the guesswork out of setup. Dial in maximum clean output without a multimeter or test tone — useful for installers and enthusiasts alike. Optional PLC2 Remote Punch Level Control — Adds a dash-mountable knob for real-time bass level adjustment. The input clip indicator lights up before distortion sets in — live feedback that protects your speakers and keeps your tune dialled in on the road. Variable HP/LP 12dB/Octave Butterworth Crossover — Independently configure each channel pair for high-pass (speakers) or low-pass (subwoofers) operation. The variable crossover point gives you precision tuning without an external processor. Onboard Punch EQ (+18dB @ 45Hz) — Adds controlled sub-bass punch directly from the amp. No separate bass EQ or processor required for most builds — tune to taste from the top-mounted control panel. 3-Channel Operating Mode — Run full-range or component speakers on the front two channels and bridge the rear pair for a subwoofer — one amp, complete system. Particularly useful in utes and wagons where boot space is at a premium. Muted Turn-On — No startup thump, no tweeter stress, no giveaway of a poorly executed install. Keeps your system sounding professional from the moment the ignition fires. Stealth Top-Mounted Control Panel — All gain, crossover, and EQ controls are accessible on the top face of the amp for easy tuning during setup, without cluttering the amp's profile once mounted. Cast Aluminium Heatsink — Handles extended thermal loads during long listening sessions. In Australian conditions — outback runs, summer road trips, confined boot spaces — heat management is a real-world spec that matters. Short Circuit & Over-Current Protection — Onboard protection circuits guard the amplifier and your speakers against wiring faults and impedance mismatches. Technical Specs Specification Detail Total RMS Power 600W Per-Channel RMS (2Ω) 150W x 4 Number of Channels 4 Operating Modes 4-channel stereo, 3-channel, bridged 2-channel Bridgeable Yes (both channel pairs) Crossover Type Variable HP/LP Butterworth Crossover Slope 12dB/octave Onboard EQ +18dB boost at 45Hz Input Type High-level (speaker-level) + RCA RCA Pass-Thru Yes Auto Turn-On Yes (via high-level input) Remote Punch Level Control Optional (PLC2, sold separately) Input Clip Indicator Yes (via PLC2) Turn-On Mode Muted Heatsink Material Cast aluminium Control Panel Location Top-mounted (stealth) Short Circuit Protection Yes Over-Current Protection Yes Dimensions Not specified Signal-to-Noise Ratio Not specified THD Not specified Frequency Response Not specified Input Sensitivity Not specified Compatible With / Goes Well With System Configurations: 4-way full-range speaker system (front + rear, 4-channel stereo) 3-channel mode — stereo component speakers (front) + bridged subwoofer (rear) Bridged 2-channel mode — high-power output for two subwoofers or speaker pairs Front-stage only (component speakers, 2 channels active) Head Unit Compatibility: Factory/OEM head units (via high-level input with Auto Turn-On) Aftermarket head units with RCA pre-outs Accessories: Rockford Fosgate PLC2 Remote Punch Level Control (optional, sold separately) Recommended: use manufacturer-specified power and speaker cables to optimise power delivery (cable spec not provided — confirm with supplier) Frequently Asked Questions Can the P600X4 run speakers and a subwoofer at the same time? Yes. In 3-channel mode, the front two channels power stereo speakers while the rear channels are bridged to drive a subwoofer — a complete system from a single amplifier. What is the RCA pass-thru and why does it matter? The RCA pass-thru outputs let you connect an additional amplifier downstream — such as a dedicated subwoofer amp — without using signal-splitting Y-adapters, preserving audio quality as your system grows. Does the P600X4 work with a factory head unit? Yes. The high-level input accepts speaker-level signals from any OEM head unit, and the Auto Turn-On circuit activates the amplifier automatically — no remote turn-on wire required. Is the PLC2 remote punch level control included in the box? No. The PLC2 is an optional accessory sold separately. It adds a dash-mountable remote bass control knob and a real-time input clip indicator to help you tune on the go without touching the amp. What does C.L.E.A.N. setup mean and do I need extra tools? C.L.E.A.N. (Clip Level Elimination Audio Notify) is Rockford Fosgate's built-in gain-setting system. No multimeter or external tools are needed — it guides you to the optimal gain level to maximise output while keeping distortion out of your signal chain. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate M5-800X4 800 Watt 4-Channel IPX6 Element Ready Marine Amplifier A marine grade 800W 4-channel Class-AD amplifier with IPX6 water intrusion rating, delivering 100W x 4 at 4-ohm (CTA-2006 rated). Features C.L.E.A.N. gain calibration, NOMAD speaker protection, P.O.W.E.R. supply technology, MEHSA4 heat management, Punch EQ2 onboard equaliser, and balanced differential inputs. Bridgeable to 2-channel for 200W x 2 at 4-ohm. Engineered in the USA. Backed by a 1 year warranty. Product Overview The Rockford Fosgate M5-800X4 is an 800W 4-channel Class-AD marine amplifier purpose-built for demanding outdoor environments. IPX6 rated and fully Element Ready, it is protected against dust, UV radiation, temperature extremes, water jets from any direction, corrosion, and vibration throughout its service life. Rated power is 100W x 4 at 4-ohm or 2-ohm, and 200W x 2 at 4-ohm bridged, all at less than 1.0% THD+N and CTA-2006 certified - confirming these are real power numbers, not inflated marketing figures. Dynamic power via PVC/PowerCube reaches 125W x 4 at 4-ohm, 200W x 4 at 2-ohm, and 400W x 2 at 4-ohm bridged. The P.O.W.E.R. supply continues to generate above rated power as voltage increases, and the Constant Power circuit topology delivers instantaneous output across varying impedance loads. Class-AD topology improves efficiency and reduces current draw from the vehicle or vessel charging system. C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) input and output clip indicators guide precise gain calibration at setup. NOMAD real-time protection guards against shorted speaker wires and dangerously low impedances. MEHSA4 (Maximum Efficiency Heat Sink Application) reduces MOSFET temperatures, lowers distortion, and extends output device life. DSM discrete surface mount components use 1% tight-tolerance parts to improve circuit efficiency, reduce cross-talk, and lower operating temperatures. Balanced differential inputs eliminate noise picked up by signal cables. Punch EQ2 provides up to 18dB of boost at 45Hz and up to 12dB at 12.5kHz for onboard tone shaping. Features & Benefits C.L.E.A.N. Technology - Precision Gain Calibration: C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with dedicated input and output clip indicator LEDs, making it straightforward to match the source unit output to the amplifier's input sensitivity for optimal, distortion-free performance. P.O.W.E.R. Supply - More Output as Voltage Rises: The P.O.W.E.R. supply is a unique power supply circuit design that continues to generate above rated output power as supply voltage increases, ensuring the amplifier delivers the output you need even under demanding conditions. NOMAD Speaker Protection - Real-Time Monitoring: NOMAD is a real-time analog protection circuit that continuously monitors for shorted speaker wires and dangerously low speaker impedances, protecting both the amplifier and connected speakers from damage without requiring manual intervention. MEHSA4 Heat Management - Lower Temperatures, Longer Life: MEHSA4 (Maximum Efficiency Heat Sink Application) reduces MOSFET operating temperatures, lowers distortion at higher output levels, increases overall amplifier durability, and prolongs the life of the output devices over time. Punch EQ2 Onboard Equaliser: The Punch EQ2 provides up to 18dB of bass boost at 45Hz for the front and rear channels, and up to 14dB of high-frequency boost at 12.5kHz, enabling onboard tone shaping without a separate equaliser or DSP. IPX6 Element Ready - Built for Marine and Outdoor Environments: IPX6 water intrusion rating confirms protection against powerful jets of water from any direction. Element Ready construction protects all components against dust, UV radiation, corrosion, temperature extremes, and vibration throughout the service life of the amplifier. Balanced Differential Inputs: Balanced differential inputs reject noise picked up by signal cables, ensuring a clean signal from source to speaker even in electrically noisy marine or powersports environments. Technical Specs Specification Detail SKU M5-800X4 Number of Channels 4 Total Power 800W Rated Power (CTA-2006, less than 1.0% THD+N) 100W x 4 at 4-ohm 100W x 4 at 2-ohm 200W x 2 at 4-ohm Bridged Dynamic Power (CTA-2006 PVC/PowerCube) 125W x 4 at 4-ohm 200W x 4 at 2-ohm 400W x 2 at 4-ohm Bridged Circuit Topology Class-AD Bridgeable Yes Frequency Response 10 Hz - 50 kHz THD + Noise Less than 0.25% at 1 Watt Input Sensitivity 150mVrms - 12Vrms Efficiency Greater than 75% Signal Input Low-Level: 4 x RCA / High-Level: (2) 4-Pin Molex Tone Controls Front/Rear: 0-18dB at 45Hz / 0-14dB at 12.5kHz High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth All-Pass Yes Power Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 16 AWG Speaker Output Connector 4-Pin Molex Cooling Convection Heatsink Extruded Aluminium Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 80A MAXI (Littelfuse 0299080) Average Current Draw at 13.8V Music 4-ohm Stereo: 29A / 2-ohm Stereo: 29A / 4-ohm Bridged: 29A Max Current Draw at 13.8V Sinewave 4-ohm Stereo: 55A / 2-ohm Stereo: 85A / 4-ohm Bridged: 90A Water Intrusion Rating IPX6 Visual Indicators Power: Blue / Protect: Red / Input Clip: Red / Output Clip: Blue/Red Dimensions (H x W x D) 42.8 x 108 x 213mm (1.7 x 4.25 x 8.41 inch) Shipping Weight 1.9kg CTA-2006 Compliant Yes Warranty 1 Year Compatible With / Goes Well With The M5-800X4 suits marine watercraft, pontoon boats, wakeboard boats, and powersports vehicles requiring a compact, high-performance 4-channel marine amplifier. It is the recommended amplifier pairing for Rockford Fosgate marine speaker kits including the HD9813RG-STG3 and HD9813SG-STAGE2 Harley-Davidson audio kits, as well as standalone marine speaker installations. Goes Well With: M2WL-8 / M2WL-8B - Rockford Fosgate M2 series 8 inch wake tower speakers, a direct application pairing for the M5-800X4 in marine builds TMS6RG / TMS6SG / TMS65 - Rockford Fosgate Element Ready marine and motorcycle fairing speakers driven by the M5-800X4 in HD kit applications M210S4B / M212S4 - M2 marine subwoofers for full system builds pairing the M5-800X4 with a dedicated marine sub DSR1 - Rockford Fosgate Digital Signal Processor for advanced signal tuning ahead of the M5-800X4 RFW4R / RFW4B - Rockford Fosgate 4 AWG marine amplifier wiring kits (red or black) to complete the installation Frequently Asked Questions What is C.L.E.A.N. and how does it help with setup? C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented Rockford Fosgate circuit that uses dedicated input and output clip indicator LEDs to guide amplifier gain calibration. By raising the source unit volume until the input clip LED activates, then adjusting the amplifier gain until the output clip LED just extinguishes, the M5-800X4 can be precisely matched to the source unit for maximum output with minimum distortion - without needing test equipment. What is the difference between rated power and dynamic power on the M5-800X4? Rated power is measured under CTA-2006 continuous conditions at less than 1.0% THD+N - these are conservative, real-world figures. Dynamic power figures (via PVC/PowerCube) reflect the amplifier's peak output capability during transient musical peaks, which is higher than the continuous rating. Both sets of figures are CTA-2006 documented and reflect actual measured performance, not inflated marketing claims. Is the M5-800X4 suitable for saltwater marine environments? Yes. The M5-800X4 carries IPX6 water intrusion rating and full Element Ready certification, protecting it against water jets from any direction, UV radiation, corrosion, dust, vibration, and temperature extremes. It is designed for both freshwater and saltwater marine applications. Can the M5-800X4 be used to power a subwoofer? Yes. The M5-800X4 is bridgeable to 2-channel, delivering 200W x 2 at 4-ohm bridged (or 400W dynamic). Two channels can be bridged to drive a single subwoofer while the remaining two channels power full-range speakers. The onboard low-pass crossover (50-250Hz at 12dB/octave) can be applied to the bridged subwoofer channel for a clean filtered bass signal. What fuse is required for the M5-800X4 and is it included? The M5-800X4 requires an 80A MAXI fuse (Littelfuse part number 0299080). The fuse is not included in the box and must be sourced separately. It is recommended to install this fuse as close to the battery as possible in the power supply line.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

600W Max, 2-Channel Amplifier Orion Cobalt 2-channel class A/B car amplifier. Specifications: RMS Power Rating: 4 ohms: 100 watts x 2 chan. / 2 ohms: 155 watts x 2 chan. / Bridged, 4 ohms: 310 watts x 1 chan. Max power output: 600 watts MOSFET power supply Tri-mode and bridgeable operation LED power and protect indicators Illuminated blue LED stripe design Selectable bass boost (0, 6, 12 dB) 2/1 channel operation High-level inputs (signal sensing for automatic turn on) 3-Way system protection circuitry (thermal, short circuit, and overload) Heavy duty aluminum alloy convection heatsink Chrome-plated RCA level input Chrome-plated screw terminals Input sensitivity (175mV-8V) Damping factor (>100) Continuously variable high-pass filter (50-500 Hz) Continuously variable low-pass filter (50-500 Hz, 2nd order 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-30,000 Hz Dimensions: 11-7/16"L x 8-1/8"W x 2-1/8"H 4-gauge power and ground wiring is required for installation Legendary Products & Support From Authorized Dealers When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Orion dealer today!

Read more less

Offers More Power, More Quality and More Bang for Your Buck! Cobalt series 2-channel class A/B car amplifier. Specifications: RMS Power Rating: 4 ohms: 60 watts x 2 chan. / 2 ohms: 80 watts x 2 chan. / Bridged, 4 ohms: 160 watts x 1 chan. Max power output: 300 watts MOSFET power supply Tri-mode and bridgeable operation LED power and protect indicators Illuminated blue LED stripe design Selectable bass boost (0, 6, 12 dB) 2/1 channel operation High-level inputs (signal sensing for automatic turn on) 3-Way system protection circuitry (thermal, short circuit, and overload) Heavy duty aluminum alloy convection heatsink Chrome-plated RCA level input Chrome-plated screw terminals Input sensitivity (175mV-8V) Damping factor (>100) Continuously variable high-pass filter (50-500 Hz) Continuously variable low-pass filter (50-500 Hz, 2nd order 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-30,000 Hz Dimensions: 7-15/16"L x 8-1/8"W x 2-1/8"H 8-gauge power and ground wiring is required for installation Legendary Products & Support From Authorized Dealers When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Orion dealer today!

Read more less

Stinger SPX350X2 2-Channel 350W Class D PowerSports Amplifier with IPX-4/5 Weather Resistance for Marine ATV UTV Motorcycle and Off-Road Applications The SPX350X2 from Stinger is a 2-channel Class D PowerSports amplifier delivering 125W RMS per channel at 4 ohms stereo, 175W RMS per channel at 2 ohms stereo, and 350W RMS bridged at 4 ohms. The IPX-4/5 weather-resistant design with weather-resistant PCB and D-Class MOSFETs makes it suited to marine, ATV, UTV, motorcycle, and off-road 4x4 applications where conventional car amplifiers are not adequate. An unregulated power supply operates across 8V to 16V, and an AUX RCA pass-through output allows multiple units to be daisy-chained from a single audio source. A remote volume control knob with mute function is included. Product overview The SPX350X2 is engineered for the moisture, dust, vibration, and voltage fluctuations encountered in PowerSports and marine environments. The IPX-4/5 rating provides protection against water splashing from any direction and water jets, suited to rain, spray, and wet off-road conditions. The amplifier is not designed for submersion. The weather-resistant PCB provides additional long-term durability in harsh environments. The unregulated power supply design operates across a wide 8V to 16V range, making the SPX350X2 suitable for boats, ATVs, and motorcycles where charging systems and battery capacities vary beyond standard automotive voltage ranges. The AUX RCA pass-through output allows a second or further SPX350X2 unit to be connected directly from the output of the first, distributing a single audio source to multiple amplifiers without additional signal splitting equipment. The 12dB per octave Linkwitz-Riley crossover is adjustable from 40Hz to 400Hz. Power and ground wiring require 8 AWG cable. Features and benefits IPX-4/5 weather-resistant design: IPX-4 provides protection against water splashing from any direction and IPX-5 adds protection against water jets, making the SPX350X2 suited to rain, spray, and wet PowerSports and marine environments. Not designed for submersion. 350W RMS bridged output: Delivers 125W RMS per channel at 4 ohms stereo, 175W RMS per channel at 2 ohms stereo, and 350W RMS bridged at 4 ohms for high-output mono subwoofer or full-range speaker applications. Class D full range amplifier with D-Class MOSFETs: Class D efficiency reduces heat generation and current draw, suited to the power budget constraints of PowerSports and marine installations. Unregulated power supply for wide voltage range operation: Operates across 8V to 16V, suited to applications with non-standard or fluctuating charging systems including boats, ATVs, and motorcycles. AUX RCA pass-through output for daisy-chaining: The AUX RCA pass-through output allows additional SPX350X2 units to be connected in series from a single audio source without additional signal splitting equipment. Remote volume control knob with mute function: The included remote volume control knob with mute function allows easy level adjustment from a convenient mounting location away from the amplifier. 12dB per octave Linkwitz-Riley crossover: The adjustable Linkwitz-Riley crossover covers 40Hz to 400Hz for flexible high pass and low pass filtering in a wide range of speaker configurations. Diecast endcaps with removable mounting feet: The compact, low-profile design with diecast endcaps and removable mounting feet allows flexible installation in confined PowerSports and marine mounting locations. What's in the box 1x SPX350X2 Amplifier 1x Remote Volume Control Knob 1x Amplifier Fly Lead Harness 1x Manual Technical specs Specification Detail SKU SPX350X2 Manufacturer Part Number SPX350X2 Brand Stinger Channels 2-channel Class Class D, full range RMS Power at 4 ohms Stereo 125W RMS x 2 RMS Power at 2 ohms Stereo 175W RMS x 2 RMS Power at 4 ohms Bridged 350W RMS Rated Voltage 14.4V Operating Voltage Range 8V to 16V, unregulated Preamp Input 2-channel balanced RCA, 200mV to 12Vrms Preamp Output 2-channel AUX RCA pass-through Frequency Response 20Hz to 20kHz Signal to Noise Ratio Greater than 110dB (CEA standard) THD+N Less than 1 percent Crossover 12dB per octave Linkwitz-Riley, 40Hz to 400Hz Power and Ground Wire Gauge 8 AWG Weather Rating IPX-4/5 Endcaps Diecast with removable mounting feet Frequently asked questions What does IPX-4/5 weather resistance mean for this amplifier?IPX-4 provides protection against water splashing from any direction. IPX-5 adds protection against water jets. For a PowerSports amplifier this means it can handle rain, spray, splashing water, and wet environments, but it is not fully waterproof and should not be submerged. Can I run the SPX350X2 in bridged mono mode?Yes. The SPX350X2 delivers 350W RMS bridged into 4 ohms, making it suitable for driving a single subwoofer or full-range speaker in high-output mono applications. Can I link multiple SPX350X2 amplifiers from one audio source?Yes. The AUX RCA pass-through output allows a second or further SPX350X2 amplifier to be connected directly from the output of the first, distributing a single audio source to multiple amplifiers without additional signal splitting equipment. What wire gauge is required to install the SPX350X2?Stinger specifies 8 AWG power and ground wiring for the SPX350X2. Using undersized wiring will limit power delivery and may cause overheating. Always match or exceed the recommended gauge for your specific installation. Why does this amplifier use an unregulated power supply?Unregulated power supplies are better suited to applications with non-standard or fluctuating voltage, common in boats, ATVs, and motorcycles where charging systems and battery capacities vary. The SPX350X2 is designed to operate reliably across 8V to 16V to accommodate these varied power environments. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Reference In Car Audio Amplification Get Pure Sound Using Pioneer PRS Amplifiers The goal of a good amplifier is to cleanly amplify the music signal, free of distortion or added color. The Premier PRS-D2200T is a new generation of Class FD (Full-Range Class D) amplifiers that clearly achieves this goal. Using an exclusing designed ICEpower circuit, music comes through clear, crisp and detailed. Class-FD ICEpower Amplifier Class-FD (Full Range Class-D) ICEpower amplifiers combine ultra-efficient Class-D circuitry and ICEpower digital amplifier technology for cleaner, truer sound quality featuring tight bass with minimal lag effect; crisp, airy mids and highs; and unsurpassed specifications. The key to superior full range performance is Controlled Oscillation Modulation (COM) and Multivariable Enhanced Cascade Control (MECC). Superior Channel Separation PRS amplifiers feature Left and Right independent signal circuitry that eliminates signal interference between the channels and achieves excellent channel separation throughout a wider frequency range. Full Custom-Made Power Supply Capacitor Bank In the quest for optimal bass, Pioneer focused on the PRS amplifier's power handling. With a high-capacity, custom-made capacitor bank adapted to the power supply section, this amp supplies power with rock-solid stability, and does an excellent job of reproducing low-frequency sound. Linear Technology Operational Amplifier The PRS amplifier features this Linear Technology Corporation operational amplifier (OP AMP) used in high-end home audio amplifiers for its precise gain and sound linearity characteristics. The PRS-D1200M includes the OP AMP in its bass boost circuitry to prevent sound quality deterioration. Energy Saving Design A huge benefit is the Class FD design, which consumes far less current than traditional amplifier designs. This results in less draw on your vehicle's alternator, and could actually improve fuel mileage in many cases. It also allows for a compact chassis (heatsink) that takes up less space and provides more installation flexibility. Variable Crossover (40~500Hz, HPF/LPF) For added flexibility, the variable crossover lets you optimize your system's efficiency and delivers the best possible sound quality. You can adjust it continuously between 40 to 500Hz, as well as selecting from either High-Pass Filter (use for your main speakers) or Low-Pass Filter (use for your subwoofers), giving you the ultimate flexibility in setting up your system. Selectable Bass Boost with Wired Bass Remote So you're in the driver's seat going 65mph and you want to fine-tune the bass boost. But the amp's out of reach, way in the back. What are you supposed to do ‚Äî pull over, get out, and run around to the trunk? That's why the PRS-D2200T comes with a wired bass remote. It's set at 50Hz, ideal for tuning in some more thump from your subwoofers. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you. Speaker Level Inputs What, you DON'T own a Pioneer headunit? Well, we won't hold it against you. In fact we'll even help you build onto your system. The PRS-D2200T's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. Premier¬Æ Two-Year Warranty The warranty on this model is two years ‚Äî double the warranty period of typical models currently on the market. Features: Bridegeable 1/2-Channel Capability Bass Boost Remote Variable LPF/HPF (40 Hz to 500 Hz, -12 dB/oct) Input level control (400 mV to 6.5 V) Low load impedance capability (4 ohm, 2 to 8 ohm allowable) Gold-Plated RCA input & output terminals, speaker terminals, and power/ground terminals Speaker level input (1.6 V to 26 V) Speaker line turn on sensor High-performance balanced isolator input circuit High-Efficiency MOSFET output section TVC (Total Vibration Control) Technology CEA2006 Specifications: 150 Watts x 2, at 4 ohms <= 1% THD+N 600 Watts x 1, at 4 ohms BRIDGE <= 1% THD+N 80 dBA Signal-to-Noise Ratio (Reference: 1 Watt Output) Specifications: Peak Music Power: 1200 Watts Number of Channels: 20 Load Impedance Capability: 2~8 Ohm (Stereo), 4~8 Ohm (Bridged) Continuous Power (4 Ohms): 150W x 2 Continuous Power (2 Ohms): 300W x 2 Continuous Power Bridged (4 Ohms): 600W x 1 Frequency Response: 10Hz ~ 40kHz Total Harmonic Distortion: 0.005% Signal-to-Noise Ratio: 100 dB Dimensions: 12 x 2-1/4 x 8 Input Level Control: Hi-Volt (400mV ~ 6.5V) Built-in Crossover: 2ch. HPF/LPF Crossover Frequency Range: 40~120Hz, -12dB/Oct. Bass Level Control: 50Hz, 0/6/9/12dB, with Remote Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

250 watts per channel. 500 watts bridged. Punch EQ2 tone control and real-time output monitoring. Product Overview The Rockford Fosgate P500X2 is a 2-channel Class A/B stereo amplifier from the Punch series, delivering 250W RMS per channel into 2-ohm loads or 150W per channel at 4 ohms. When bridged, it combines both channels into a single 500W RMS mono output at 4 ohms, making it a capable driver for a pair of 8-ohm SVC subwoofers in parallel, or a quad configuration of 2-ohm DVC subwoofers. Total rated output is 500W RMS, CEA-2006 verified. Where the P500X2 stands apart within the Punch 2-channel range is its Punch EQ2 tone control system a dual-band EQ offering up to +18dB of bass boost at 45Hz and up to +12dB of treble lift at 12kHz, with the active EQ function varying depending on the amplifier's LP/AP/HP crossover switch position. Combined with a tri-colour output clip LED that displays real-time THD levels, an independent input clip LED, and thermal protection monitoring, the P500X2 gives the installer and listener more visibility into amplifier performance than any other unit in the Punch stereo range. Wide input sensitivity (150mV–12V) supports a broad range of source units, and Captive C-Clamp connectors on both power and speaker terminals provide a secure, vibration-resistant connection. Key Specifications Channels: 2 Rated power @ 4 ohms: 150W RMS x 2 Rated power @ 2 ohms: 250W RMS x 2 Rated power bridged @ 4 ohms: 500W RMS x 1 Total rated power: 500W RMS (CEA-2006) Dynamic power @ 4 ohms: 223W x 2 (PowerCube) Dynamic power @ 2 ohms: 365W x 2 (PowerCube) Bridgeable: Yes — 500W x 1 @ 4 ohms Circuit topology: Class A/B Efficiency (average): 73% @ 4 ohms Frequency response: 20Hz – 20kHz (+/-1dB) Input sensitivity: 150mV – 12V THD+Noise: <1.0% @ 4 ohms / <1.0% @ 2 ohms Punch EQ2 Bass: 0dB to +18dB @ 45Hz Punch EQ2 Treble: 0dB to +12dB @ 12kHz Crossover: 12dB/octave Butterworth — LP / AP / HP switch Signal input: Hi/Low level, 1 x RCA pair Signal output: 1 x RCA pair (pass-through) Remote control: Optional PLC2 (not included — sold separately) Visual indicators: Power / Protect / Thermal LED, Input Clip LED, Output Clip LED (tri-colour THD) Power wire gauge: 4 AWG Power input connector: Captive C-Clamp Speaker wire gauge: 8 AWG – 18 AWG Speaker output connector: Captive C-Clamp Cooling: Convection Operating voltage: 9–16V DC Recommended fuse: 80A (not included) Average current draw: 40A @ 13.8V (music) Max current draw: 80A @ 13.8V (sinewave) Suggested alternator: 75A minimum Dimensions (H x W x D): 6.05 x 19.71 x 33.73 cm Shipping weight: 5.57 kg Compliance: CEA-2006 Features & Benefits 250W Per Channel @ 2Ω | 500W Bridged @ 4Ω — Full Flexibility — Run in stereo at 250W per channel for a pair of speakers, or bridge to a single 500W mono output for a subwoofer configuration. The P500X2 covers both use cases from one chassis — useful for systems that may evolve from a speaker-focused build to one incorporating a dedicated subwoofer without requiring a second amplifier purchase. Punch EQ2 — Dual-Band Bass and Treble Control — Unlike the single-band Punch EQ found on other amplifiers in the range, the Punch EQ2 includes both a bass control (0dB to +18dB @ 45Hz) and a treble control (0dB to +12dB @ 12kHz). The active EQ band changes depending on the crossover switch position — in Low-Pass mode the bass EQ is operative, in High-Pass mode the treble EQ is operative, and in All-Pass (bypass) mode both bands can be used simultaneously. This allows frequency-appropriate tuning regardless of how the amplifier is deployed in the system. Tri-Colour Output Clip LED — Real-Time THD Monitoring — The output clip LED displays three distinct states based on measured distortion at the output stage: blue indicates clean output below 0.5% THD, violet indicates approaching 1% THD, and red signals 10% or greater THD — a level that causes audible distortion and risks speaker damage. This real-time feedback allows gain calibration confirmation after installation and ongoing monitoring during use. It is one of the most practical diagnostic tools available on an amplifier at this price point. Independent Input Clip LED — A separate LED monitors the incoming signal for clipping before it enters the amplifier. Combined with the output clip LED, this allows the installer to distinguish between clipping at the source (head unit or preamp) and clipping generated within the amplifier itself — essential for accurate gain structure setup. C.L.E.A.N. Setup System — The on-board C.L.E.A.N. calibration system works alongside the clip LEDs to guide precise gain matching between the source unit and the P500X2. Together, these tools eliminate the guesswork that causes premature speaker failure from miscalibrated gain settings. Wide Input Sensitivity (150mV – 12V) — An unusually broad input sensitivity range accommodates everything from low-output factory head units to high-output aftermarket preamps without requiring external level adjustment. This extends compatibility across a wide range of source units in new and factory-retained head unit configurations. High-Level Input with Auto Turn-On — Accepts speaker-level signal from factory head units and powers on automatically when signal is detected — no remote turn-on wire required. The wide 150mV–12V sensitivity range further simplifies integration with both OEM and aftermarket systems. Optional PLC2 Remote Level Control — The P500X2 is wired and ready for the Rockford Fosgate PLC2 (sold separately), adding driver-accessible output adjustment and activating the input clip indicator for front-seat gain monitoring. Not included — sold separately. Captive C-Clamp Connectors — Power input and speaker output terminals use Captive C-Clamp connectors rather than standard screw terminals. The C-Clamp design applies distributed clamping pressure across a wider contact area, providing a more vibration-resistant and mechanically secure connection — particularly beneficial in vehicles subject to road vibration, off-road use, or high-power current demands. RCA Pass-Through Output — Signal chains cleanly to a second amplifier via the RCA pass-through — useful in systems running the P500X2 on speakers alongside a separate Punch mono amplifier handling subwoofer duty. LP / AP / HP Crossover Switch — The three-position crossover switch configures the P500X2 as a low-pass filtered amplifier (sub channel), all-pass (full-range), or high-pass filtered (speaker channel in a crossed-over system), each mode also governing which EQ band of the Punch EQ2 is active. Crossover frequency range is not specified in the provided data — confirm with Rockford Fosgate. Thermal LED + Full Protection — A dedicated thermal LED provides visual warning of elevated operating temperatures before the protection circuit activates. Over-current and short-circuit protection are active across both channels, and muted turn-on prevents power-up thumps that can stress tweeters. Technical Specs Specification Detail Channels 2 Rated power @ 4Ω 150W RMS x 2 Rated power @ 2Ω 250W RMS x 2 Rated power — bridged @ 4Ω 500W RMS x 1 Total rated power 500W RMS Dynamic power @ 4Ω 223W x 2 (PowerCube) Dynamic power @ 2Ω 365W x 2 (PowerCube) Bridgeable Yes Circuit topology Class A/B Efficiency (average) 73% @ 4Ω Frequency response 20Hz – 20kHz (+/-1dB) Input sensitivity 150mV – 12V THD+Noise <1.0% @ 4Ω / <1.0% @ 2Ω Punch EQ2 Bass 0dB to +18dB @ 45Hz Punch EQ2 Treble 0dB to +12dB @ 12kHz Crossover LP / AP / HP switch — 12dB/octave Butterworth Crossover frequency range Not specified Signal input Hi/Low level, 1 x RCA pair Signal output 1 x RCA pair (pass-through) Remote control Optional PLC2 (sold separately) Output clip LED Tri-colour: Blue (<0.5% THD) / Violet (1% THD) / Red (10%+ THD) Input clip LED Yes Thermal LED Yes Power / Protect LED Yes Power wire gauge 4 AWG Power input connector Captive C-Clamp Speaker wire gauge 8 AWG – 18 AWG Speaker output connector Captive C-Clamp Cooling Convection Operating voltage 9–16V DC Recommended fuse 80A (not included) Average current draw 40A @ 13.8V (music) Max current draw 80A @ 13.8V (sinewave) Suggested alternator 75A minimum Dimensions (H x W x D) 6.05 x 19.71 x 33.73 cm Shipping weight 5.57 kg Compliance CEA-2006 Compatible With / Goes Well With Stereo speaker mode: 4-ohm coaxial or component speakers — 150W RMS per channel 2-ohm coaxial or component speakers — 250W RMS per channel Component speaker sets with passive crossovers (crossovers not supplied) Factory and aftermarket head units (150mV–12V input sensitivity) Bridged mono mode (500W @ 4Ω): Pair of 8-ohm SVC subwoofers wired in parallel (combined 4Ω load — confirmed by manufacturer) Quad configuration of 2-ohm DVC subwoofers wired to a combined 4Ω load (confirmed by manufacturer — specific wiring required; professional installation strongly recommended) Goes well with: Rockford Fosgate Punch series speakers (matched to 150W or 250W per channel) Rockford Fosgate P300X1 or Punch mono amplifier (via RCA pass-through for a full two-amp system) Rockford Fosgate PLC2 Remote Punch Level Control (optional — sold separately) Aftermarket head units with RCA preamp outputs (150mV–12V sensitivity compatible) Frequently Asked Questions What subwoofer configurations can the P500X2 drive when bridged? Bridged at 4 ohms, the P500X2 produces 500W RMS. The manufacturer confirms two configurations: a pair of 8-ohm SVC subwoofers wired in parallel, or a quad of 2-ohm DVC subwoofers in a specific series/parallel arrangement — both presenting a 4Ω load. Do not bridge below 4 ohms. What is Punch EQ2 and how does it differ from standard Punch EQ? Punch EQ2 is a dual-band tone control offering both bass boost (up to +18dB @ 45Hz) and treble boost (up to +12dB @ 12kHz). The active band changes depending on the LP/AP/HP crossover switch position — bass EQ in Low-Pass mode, treble EQ in High-Pass mode, and both available in All-Pass mode. What does the tri-colour output clip LED indicate? The output clip LED changes colour based on measured THD at the amplifier's output: blue indicates clean output below 0.5% THD, violet signals approximately 1% THD, and red indicates 10% or greater THD — audible distortion that risks speaker damage. It allows real-time gain monitoring without test equipment. Is the Punch Level Control included with the P500X2? No. The PLC2 remote Punch Level Control is an optional accessory sold separately. The P500X2 is fully wired to accept it, and when connected the PLC2 adds driver-accessible output adjustment and activates the input clip indicator for front-seat monitoring. What does CEA-2006 compliance mean for the P500X2? CEA-2006 requires power ratings to be measured simultaneously across all channels under defined conditions. The 250W x 2 and 500W bridged figures are verified, real-world specifications — not single-channel burst or inflated peak ratings. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Two channels. BRT efficiency. Built for motorcycles, ATVs, and stealth installs. Product Overview The Rockford Fosgate PBR300X2 is a 2-channel amplifier from the Punch series, delivering 300W total using Rockford Fosgate's patented BRT (Boosted Rail Technology). Unlike conventional 2-channel amplifiers that rely on a switching power supply to generate their output, BRT achieves rated power through an ultra-efficient design that eliminates the switching stage entirely resulting in a chassis significantly smaller than a traditional amplifier of equivalent output. Total power is 300W across two channels; power per channel and impedance breakdown are not specified in supplier-provided data. The PBR300X2 is positioned for installations where space and electrical draw are primary constraints. Motorcycles requiring stereo speaker output, ATVs, and recreational vehicles with limited mounting real estate are the target use cases along with stealth car and marine builds where a standard amplifier chassis simply won't fit. The variable 4–6V hi-level DC offset turn-on circuit allows direct integration with OEM speaker outputs in systems that don't provide a dedicated remote turn-on wire, while high-level inputs eliminate the need for an aftermarket head unit or RCA outputs. A 12dB/octave Butterworth crossover and MOSFET output stage complete a practical, installation-friendly feature set. Key Specifications Channels: 2 Total output power: 300W (power per channel and impedance breakdown — not specified) Power supply technology: BRT (Boosted Rail Technology — no switching power supply) Output stage: MOSFET Crossover: 12dB/octave Butterworth (frequency range — not specified) Signal input: High level Turn-on method: Variable hi-level DC offset (4–6V) Chassis: Ultra-compact Bridgeable: Not specified Frequency response: Not specified Input sensitivity: Not specified Nominal impedance: Not specified CEA compliance: Not specified in provided data Power wire gauge: Not specified Speaker wire gauge: Not specified Operating voltage: Not specified Recommended fuse: Not specified Dimensions: Not specified Features & Benefits BRT (Boosted Rail Technology) — No Switching Power Supply — The PBR300X2 uses Rockford Fosgate's patented BRT architecture to produce rated power without a conventional switching power supply. This reduces current draw, minimises electrical noise, and shrinks the chassis to a fraction of the size of a traditional 2-channel amplifier — making it viable for vehicle types and install locations that would otherwise rule out amplification entirely. Ultra-Compact Chassis — Stereo Power in a Stealth Footprint — Where the PBR300X1 delivers mono output for a single driver, the PBR300X2 provides two independent channels from the same compact BRT platform. This makes it the logical choice for motorcycle stereo builds — left and right speaker channels from a single unit that installs in a saddlebag, underseat compartment, or within a fairing. Exact dimensions are not specified in supplier data — confirm with Rockford Fosgate before planning a space-critical install. Variable Hi-Level DC Offset Turn-On (4–6V) — Motorcycles, ATVs, and many OEM car audio systems either lack a dedicated remote turn-on output or carry a DC offset on their speaker outputs. The PBR300X2's variable DC offset circuit detects a 4–6V signal on the speaker inputs and uses it to power the amplifier — removing the need to source and run a remote wire in installations where doing so is difficult or impossible. High-Level Inputs — Accepts signal directly from the speaker outputs of a factory head unit, OEM radio, or handlebar-mounted controller. No line output converter or aftermarket head unit is required, keeping the installation simple and the component count low — particularly relevant for motorcycle and recreational vehicle builds where simplicity and reliability matter. MOSFET Output Stage — The MOSFET output stage contributes to the compact, efficient character of the PBR300X2 and handles the variable voltage and vibration conditions common in motorcycle and off-road vehicle environments more reliably than earlier output stage designs. It also supports the BRT architecture's low-heat operating profile. 12dB/Octave Butterworth Crossover — The on-board Butterworth crossover allows the two output channels to be filtered, directing appropriate frequency ranges to different speakers in a system. The crossover frequency range is not specified in supplier data — confirm with Rockford Fosgate before planning a multi-speaker install. Technical Specs Specification Detail Channels 2 Total output power 300W Power per channel Not specified Power by impedance Not specified Power supply BRT — no switching power supply Output stage MOSFET Circuit topology Not specified Frequency response Not specified Input sensitivity Not specified THD+Noise Not specified Nominal impedance Not specified Bridgeable Not specified Crossover type 12dB/octave Butterworth Crossover frequency range Not specified Signal input High level Turn-on method Variable hi-level DC offset, 4–6V CEA compliance Not specified Power wire gauge Not specified Speaker wire gauge Not specified Operating voltage Not specified Recommended fuse Not specified Dimensions Not specified Weight 4.3 kg Compatible With / Goes Well With The PBR300X2 is confirmed by the manufacturer for use in the following applications: Motorcycles requiring 2-channel (stereo) speaker amplification ATVs and off-road recreational vehicles Smaller stealth car, marine, or custom installations with limited space OEM/factory audio systems (via variable hi-level DC offset turn-on) Goes well with: Compact 2-channel speakers suited to motorcycle, ATV, or stealth car audio builds Factory head units and OEM audio systems (high-level input compatible) Marine or weatherproof speaker enclosures for recreational vehicle applications Frequently Asked Questions What is BRT (Boosted Rail Technology) and why does it matter for a 2-channel amp? BRT is Rockford Fosgate's patented amplifier architecture that generates rated power without a switching power supply. The result is a significantly smaller and more efficient chassis than a conventional 2-channel amplifier — making stereo amplification viable in motorcycles, ATVs, and stealth builds where space and current draw are limited. How much power does each channel produce? Total power is 300W across both channels. The per-channel power rating and impedance breakdown are not specified in supplier-provided data. Contact Rockford Fosgate or your authorised dealer to confirm per-channel output before matching to speakers. Will the PBR300X2 work on a motorcycle or ATV? Yes. The PBR300X2 is specifically designed for motorcycles, ATVs, and recreational vehicles. The BRT architecture's low current draw and ultra-compact chassis make it practical for these applications, and the variable DC offset turn-on circuit supports OEM systems that lack a standard remote turn-on output. What is the variable DC offset turn-on circuit? Many motorcycle and OEM systems output a 4–6V DC offset on their speaker lines rather than a dedicated remote turn-on signal. The PBR300X2 detects this voltage and uses it to power the amplifier automatically — eliminating the need to wire a separate remote turn-on lead in most factory and recreational vehicle installations. Can the PBR300X2 be used in a standard car or truck installation? Yes, though it is engineered primarily for space-constrained and stealth applications. It suits any car or truck installation where a compact chassis, low current draw, and factory head unit compatibility are priorities. Standard amplifier features such as RCA inputs, Punch EQ, and remote level control are not confirmed in supplier data — verify the full feature set with Rockford Fosgate if these are required. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P1000X2 1000 Watts, Two Channels, Zero Trunk Compromise Product Overview The Rockford Fosgate P1000X2 is a Punch Series 2-channel stereo amplifier built for car audio enthusiasts who demand serious output without sacrificing boot space. Rated at 500 watts RMS per channel at 2 ohms or bridged to deliver the full 1000 watts into a single mono load this amplifier is equally at home powering full-range and component speaker systems as it is driving a dedicated subwoofer configuration. Where the P1000X2 earns its place in a serious build is in its flexibility. It's optimally matched to a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers when bridged, and its onboard Punch EQ with +18dB boost at 45Hz means you can dial in the low-end punch you're after without reaching for an external processor. The stealth top-mounted control panel keeps the setup clean, and the cast aluminium heatsink handles the heat critical in Australian climates where cabin temperatures can push gear hard on a summer run. Key Specifications Total RMS Output: 1000 watts Per-Channel Output: 500W x 2 at 2 ohms Channels: 2 (stereo or bridged mono) Bridgeable: Yes — 1000W mono Crossover: 12dB/octave Butterworth Onboard EQ: Punch EQ — +18dB boost at 45Hz Inputs: High-level (speaker-level) and RCA RCA Pass-Thru Outputs: Yes Auto Turn-On: Yes — via high-level input detection Remote Control: Optional PLC2 Punch Level Control (with input clip indicator) Turn-On Behaviour: Muted (no thump on startup) Heatsink: Cast aluminium Control Panel Position: Stealth top-mounted Protection: Short circuit and over-current Features & Benefits High-Level Input with Auto Turn-On — Connects directly to your factory head unit's speaker outputs, no RCA cables required. Ideal for OEM upgrades where aftermarket decks aren't an option. RCA Pass-Thru Outputs — Daisy-chain a second amplifier for subs or additional channels without signal loss back at the head unit. Keeps your wiring tidy in multi-amp builds. C.L.E.A.N. Setup (Clip Level Elimination Audio Notify) — Rockford Fosgate's built-in gain-setting tool takes the guesswork out of calibration, helping you maximise output without introducing distortion. Especially useful if you're setting up without a multimeter or test tone. Optional PLC2 Remote Punch Level Control — Mount a dash-accessible remote volume control for the amp's output. The input clip indicator lights up to show when you're pushing the signal too hard — real-time feedback without looking at the amp. 12dB/Octave Butterworth Crossover — Clean roll-off characteristics let you configure the amp for full-range, high-pass, or low-pass duties depending on your system layout, without phase issues at the crossover point. Onboard Punch EQ (+18dB @ 45Hz) — Targets the sub-bass frequencies that give music its physical impact. Tune the low-end to taste directly on the amp — no separate bass processor needed for most builds. Muted Turn-On — Eliminates the pop and thump on startup that can stress tweeters and give away a sloppy install. A small detail that separates a clean build from an amateur one. Stealth Top-Mounted Control Panel — All controls sit on top of the amp for easy access during setup and tuning, while keeping the side profile clean for tight mounting locations. Cast Aluminium Heatsink — Dissipates heat efficiently during extended listening sessions. In Australian conditions — long highway runs, hot car parks, summer road trips — thermal management matters more than most spec sheets suggest. Short Circuit & Over-Current Protection — Onboard protection circuits guard both the amplifier and your speakers against wiring faults or load mismatches. Technical Specs Specification Detail Total RMS Power 1000W Per-Channel RMS (2Ω) 500W x 2 Number of Channels 2 Bridged Mono Output 1000W Crossover Type Butterworth Crossover Slope 12dB/octave Onboard EQ +18dB boost at 45Hz Input Type High-level (speaker-level) + RCA RCA Pass-Thru Yes Auto Turn-On Yes (via high-level input) Remote Punch Level Control Optional (PLC2, sold separately) Input Clip Indicator Yes (via PLC2) Turn-On Mode Muted Heatsink Material Cast aluminium Control Panel Location Top-mounted (stealth) Short Circuit Protection Yes Over-Current Protection Yes Dimensions Not specified Signal-to-Noise Ratio Not specified THD Not specified Frequency Response Not specified Input Sensitivity Not specified Compatible With / Goes Well With Speaker Configurations: Full-range speaker systems (2-channel stereo) Component speaker systems (2-channel stereo) Pair of 8-ohm SVC subwoofers (bridged mono) Four 2-ohm DVC subwoofers (bridged mono) Accessories: Rockford Fosgate PLC2 Remote Punch Level Control (optional, sold separately) Recommended: use manufacturer-specified power and speaker cables to optimise power delivery (cable spec not provided — confirm with supplier) Head Unit Compatibility: Factory/OEM head units (via high-level input) Aftermarket head units with RCA pre-outs Frequently Asked Questions How much power does the P1000X2 actually produce per channel? In stereo mode, the P1000X2 delivers 500 watts RMS into each channel at 2 ohms — 1000 watts total. Always match speaker RMS ratings accordingly. Can the P1000X2 be bridged to run a single subwoofer? Yes. Bridged, the P1000X2 outputs 1000 watts mono. It's best matched to a pair of 8-ohm SVC subs or four 2-ohm DVC subwoofers in this configuration. Does the P1000X2 work with a factory head unit that has no RCA outputs? Yes. The high-level input allows direct connection to speaker-level outputs from an OEM or factory head unit, and the Auto Turn-On circuit eliminates the need for a remote turn-on wire. What does C.L.E.A.N. setup mean and do I need extra equipment to use it? C.L.E.A.N. (Clip Level Elimination Audio Notify) is Rockford Fosgate's onboard gain-calibration system. No additional tools are required — it guides you to the correct gain level without a multimeter or test equipment. Is the PLC2 remote punch level control included in the box? No. The PLC2 is an optional accessory sold separately. It adds a dash-mountable remote volume knob and a real-time input clip indicator — useful for daily-driver builds where you adjust bass on the fly. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Value-Packed And Purpose-Built For Quality Audio Amplification On The Water The FUSION AM Series marine amplifiers are purpose-built for the marine environment. Boasting some of the most impressive environmental protection available, they deliver performance on the water like never before. With 2 channels and a 400 Watt peak power output, the MS-AM402 will drive up to two subwoofers, an extra pair of speakers, or even 4 speakers (2 speakers in parallel each channel at 2 Ohms) to spread the sound around your vessel. Incorporating heat-tempered and conformal coated PCBs for maximum product life, and gold-plated connectors for improved signal flow, the MS-AM402 reproduces clean and powerful audio with enough power to rock the boat. Features: 400W peak power output to power up to four speakers Class-AB amplifier – power efficient with less cross-over distortion Conformal coated PCBs – water resistant protection from salt air and moisture FUTRANZ heat sink technology – transfers heat more efficiently and provides more thermal stability with maximum component reliability F.R.A.T (Fusion Regulated Amplifier Technology) – provides enormous power output at low voltage. F.I.S.T (Fusion Intercooled Semi-Conductor Technology) – clamps down internal power switching to rapidly remove heat from all associated semi-conductors 1 year limited Consumer Warranty Specifications: Amplifier Class Class-AB Rated Power (2 Ohms) 100 Watts RMS x 2 @ 14.4V - 2 Ohms 1% THD Rated Power (4 Ohms Bridged) 200 Watts RMS x 1 @ 14.4V - 4 Ohms Bridged 1% THD Frequency Response 5Hz - 38kHz +/- 3dB Peak Power 400 Watts Rated Power (4 Ohms) 65 Watts RMS x 2 @ 14.4V - 4 Ohms 1% THD Depth 229mm [9"] Height 53mm [2-1/16"] Length 296mm [11-/2/3"] Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

Rockford Fosgate M2-200X2 M2 Series 200 Watt 2-Channel Full-Range Class-D Element Ready Marine Amplifier A marine grade 200W 2-channel full-range Class-D amplifier delivering 100W x 2 at 2-ohm or 200W x 1 at 4-ohm bridged (CTA-2006 rated). Features C.L.E.A.N. gain calibration, P.O.W.E.R. supply, fully adjustable high-pass and low-pass crossovers, variable infrasonic filter, RCA pass-thru outputs, NOMAD speaker protection, MEHSA4 heat management, and conformal coated circuit board. Backed by a 2 year warranty. Product Overview The Rockford Fosgate M2-200X2 is a 200W 2-channel full-range Class-D marine amplifier from the M2 Element Ready series, purpose-built for powering marine speakers across the full audio spectrum. Full-Range Class-D topology delivers high-efficiency power delivery across a 20Hz-20kHz frequency response while reducing current demand on the vessel's electrical system. Rated continuous power is 50W x 2 at 4-ohm, 100W x 2 at 2-ohm, or 200W x 1 at 4-ohm bridged to mono (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 60W x 2 at 4-ohm, 107W x 2 at 2-ohm, and 215W x 1 at 4-ohm bridged. The circuit board is conformal coated to protect electronics from dust and water, and the UV stable powder coated cast aluminium heatsink provides protection against the marine environment. Zinc nickel-plated marine grade brass connection terminals resist corrosion at the connection points. Fully adjustable 12dB/octave Butterworth high-pass and low-pass crossovers are included, along with an all-pass mode and variable infrasonic filter. RCA pass-thru outputs allow downstream amplifier chaining. Auto-Sense turn-on via high-level input removes the need for a dedicated remote wire, with a bypass switch available for vessels with Retained Accessory Power (RAP) systems. RATS tested for quality and performance and optimised using the AudioGraph PowerCube measurement tool. Features & Benefits Full-Range Class-D - Efficient 2-Channel Marine Amplification: Full-Range Class-D topology delivers high-efficiency power across the complete 20Hz-20kHz audio spectrum, reducing current demand on the vessel's electrical system compared to traditional Class-A/B designs while powering marine speakers with clean, accurate output. Bridgeable to 200W Mono: The M2-200X2 can be bridged to a single mono channel delivering 200W x 1 at 4-ohm (215W dynamic), making it usable as a subwoofer amplifier in smaller builds or as a dedicated mono driver for a single full-range speaker pair in more compact marine audio systems. C.L.E.A.N. Technology - Precision Gain Calibration: C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with dedicated input and output clip indicator LEDs, enabling precise gain calibration at setup to maximise output while minimising distortion. Fully Adjustable Crossovers with All-Pass Mode: Both high-pass and low-pass crossovers are fully adjustable from 50Hz to 250Hz at 12dB/octave Butterworth, with an all-pass mode for full-bandwidth output when no crossover filtering is needed. A variable infrasonic filter from 50Hz to 250Hz is also available for additional low-frequency protection. RCA Pass-Thru Outputs for Downstream Chaining: RCA pass-thru outputs are active with both RCA and high-level input, allowing the signal to be passed to an additional amplifier - such as the M2-500X1 subwoofer amplifier - without signal degradation. Auto-Sense Turn-On with RAP Bypass: Auto-Sense activates the amplifier automatically when a high-level input signal is detected, removing the need for a dedicated remote turn-on wire. A bypass switch is included for vessels with Retained Accessory Power (RAP) systems to prevent the amplifier from remaining on after the ignition is switched off. NOMAD, MEHSA4, and Conformal Coated Circuit Board: NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. MEHSA4 (Maximum Efficiency Heat Sink Application) reduces MOSFET temperatures, lowers distortion, and extends output device life. The conformal coated circuit board protects the electronics against dust and water ingress at the PCB level. Technical Specs Specification Detail SKU M2-200X2 Number of Channels 2 Total Power 200W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 50W x 2 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 100W x 2 Rated Power - 4-ohm Bridged (CTA-2006) 200W x 1 Dynamic Power - 4-ohm (PowerCube) 60W x 2 Dynamic Power - 2-ohm (PowerCube) 107W x 2 Dynamic Power - 4-ohm Bridged (PowerCube) 215W x 1 Circuit Topology Full-Range Class-D Bridgeable Yes Frequency Response 20 Hz - 20 kHz THD + Noise Less than 1.0% at 4-ohm and 2-ohm Input Sensitivity Low-Level: 150mV - 4V / High-Level: 450mV - 12V Signal Input Low-Level: 2 x RCA / High-Level: 4-Pin Molex Signal Output 2 x RCA Pass-Thru (active with RCA or High-Level input) Tone Controls None High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth All-Pass Yes Infrasonic Filter Variable Remote Controls None Auto-Sense Turn-On Yes (with RAP bypass switch) Power Wire Gauge 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Terminals Zinc Nickel-Plated Marine Grade Brass Cooling Convection Heatsink UV Stable Powder Coated Cast Aluminium (Focused Mass) Circuit Board Protection Conformal Coated Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 30A Max Current Draw at 13.8V Sinewave 18A Visual Indicators Power/Protect / C.L.E.A.N. In / C.L.E.A.N. Out Dimensions (H x W x D) 49 x 173 x 205mm (1.9 x 6.8 x 8.1 inch) CTA-2006 Compliant Yes Quality Testing RATS (Rockford Automated Testing System) Warranty 2 Years Compatible With / Goes Well With The M2-200X2 suits marine watercraft and powersports applications requiring a compact, efficient 2-channel full-range amplifier for speaker pairs. At 18A maximum current draw and a 30A fuse requirement, it places minimal demand on the vessel's electrical system. It pairs naturally with the M2-500X1 mono subwoofer amplifier for a complete M2 series speaker and subwoofer system using the RCA pass-thru to chain the two amplifiers. Goes Well With: M2-500X1 - Companion M2 series 500W mono subwoofer amplifier, chainable via the M2-200X2's RCA pass-thru outputs for a complete M2 series system M2-8H - Rockford Fosgate M2 series 8 inch 2-way horn marine speakers, a matched pairing with the M2-200X2 for in-hull or in-dash mounting M2WL-8 / M2WL-8B - M2 series 8 inch wake tower speakers powered by the M2-200X2's stereo channels M5-800X4 - Higher output M5 series 4-channel marine amplifier for builds requiring more power than the M2-200X2 can provide per channel RFW4R / RFW4B - Rockford Fosgate 4 AWG amplifier wiring kits (red or black) matched to the M2-200X2's 4 AWG power wire requirement Frequently Asked Questions What is the difference between the M2-200X2 and the M5-800X4? The M2-200X2 is a 2-channel full-range Class-D marine amplifier rated at 100W x 2 at 2-ohm from the M2 Element Ready series, designed for accessible, space-efficient marine speaker amplification. The M5-800X4 is a 4-channel Class-AD marine amplifier rated at 100W x 4 at 2-ohm from the premium M5 series, adding two additional channels, IPX6 water intrusion rating, Punch EQ2, the PRESET feature, and significantly more installation flexibility. Choose the M2-200X2 for a compact, economical 2-channel solution; choose the M5-800X4 for a 4-channel build with premium marine protection. Can the M2-200X2 be used to power a subwoofer? Yes, when bridged to mono. In bridged mode the M2-200X2 delivers 200W x 1 at 4-ohm (215W dynamic), which is sufficient to drive a single 4-ohm marine subwoofer at moderate output levels. For dedicated subwoofer amplification with more power and a tunable Punch EQ, the M2-500X1 is the recommended companion amplifier. The M2-200X2's RCA pass-thru outputs allow it to chain directly to the M2-500X1 in a two-amplifier system. Does the M2-200X2 need a dedicated remote turn-on wire? Not necessarily. The Auto-Sense feature activates the amplifier automatically when it detects a high-level (speaker) input signal from the source unit, removing the need for a separate remote wire. A RAP bypass switch is also included for vessels where the source unit continues to output a speaker signal after the ignition is switched off, preventing the amplifier from remaining on unintentionally. What crossover options are available on the M2-200X2? The M2-200X2 offers a fully adjustable high-pass crossover, a fully adjustable low-pass crossover, and an all-pass mode, all using 12dB/octave Butterworth slopes adjustable from 50Hz to 250Hz. A variable infrasonic filter is also available. This makes it suitable for use as a speaker amplifier in all-pass mode, a high-passed mid-range amplifier, or in bridged mono as a low-passed subwoofer amplifier, depending on the system configuration. What fuse does the M2-200X2 require and is it included? The M2-200X2 requires a 30A fuse. The fuse is not included in the box and must be sourced separately. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Note that the 30A fuse requirement is significantly lower than the 80A required by the M2-500X1, reflecting the M2-200X2's lower current draw of 18A maximum.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less