100 Watts × 4 Channels at 2Ω Compact 4-Channel Amplifier for Front/Rear Systems and Front Stage with Rear Subwoofer.
Product Overview
The Rockford Fosgate Power T400-4 is a 4-channel amplifier delivering 100W into each of its four channels at 2Ω confirmed by Rockford Fosgate making it suitable for a full 4-way front and rear speaker system or a front stage and rear subwoofer configuration. The compact chassis with Dynamic Thermal Management is specifically designed for under-seat or space-constrained installation locations that full-size 4-channel amplifiers cannot accommodate.
Unlike the Class-AD T400X4AD which prioritises ultra-compactness for hybrid vehicles and UTVs the T400-4 is a full-featured conventional design with a MOSFET power supply and output stage, 4-gauge power and ground connectors, a 24dB/octave crossover, and a 2/4 channel input switch for flexible headunit integration. It is the choice when confirmed 100W per channel at 2Ω output is the primary specification requirement, and when the installation allows 4-gauge wiring for maximum power delivery.
Key Specifications
Power output: 100W × 4 channels @ 2Ω (confirmed)
Power output @ 4Ω: Not specified
Bridged output: Not specified
Configuration: 4-channel
MOSFET power supply: Yes
MOSFET output stage: Yes
Crossover: 24dB/octave
2/4 channel input switch: Yes
Power/ground connectors: 4 gauge
Speaker connections: Audiophile grade
Thermal management: Dynamic Thermal Management
Chassis: Compact — under-seat installation capable
Amplifier class: Not specified
Signal-to-noise ratio: Not specified
THD: Not specified
Frequency response: Not specified
Dimensions: Not specified
Weight: Not specified
Warranty: Not specified
Features & Benefits
100W × 4 Channels at 2Ω — Confirmed Power Specification — Unlike many amplifier listings where per-channel power at a specific impedance is absent, Rockford Fosgate confirms 100W per channel into 2Ω on the T400-4. This gives the system designer a concrete figure to work with when matching the amplifier to 2Ω speaker loads. Power at 4Ω and bridged mono output should be confirmed from the official Rockford Fosgate datasheet.
Front/Rear Fading or Front Stage Plus Rear Sub Configurations — The T400-4 is designed for two typical 4-channel setups: a full 4-way front and rear full-range speaker system, or a front stage component system with rear subwoofers driven from the rear channels. The 24dB/octave crossover and 2/4 channel input switch support both configurations without external signal processing.
Dynamic Thermal Management for Compact Installation — Rather than a fixed protection shutdown at a temperature threshold, Dynamic Thermal Management actively manages the amplifier's output in response to temperature — reducing output as needed to prevent overheating in confined spaces. This allows the T400-4 to be installed under front seats, in centre consoles, or in other space-constrained locations where heat dissipation is limited.
MOSFET Power Supply and Output Stage — MOSFET-based design in both the power supply and output stage provides clean, efficient power delivery and responsive switching — the same proven technology used across the Rockford Fosgate Power series.
24dB/Octave Crossover — Steep crossover slope for precise frequency band separation — enabling high-pass filtering on front stage speakers and low-pass filtering on rear subwoofers, or full-range pass-through for a standard 4-way system.
2/4 Channel Input Switch — In 2-channel mode, a stereo input is internally distributed to all four output channels — allowing connection to head units with only a 2-channel RCA preamp output. In 4-channel mode, discrete front and rear RCA inputs allow independent level control.
4 Gauge Power and Ground Connectors — Appropriate wiring infrastructure for a 400W 4-channel amplifier, ensuring the power delivery path matches the amplifier's output capability.
Audiophile Grade Speaker Connections — High-quality output terminals for a solid, low-resistance connection to speaker voice coils across all four channels.
Technical Specs
Specification
Detail
Brand
Rockford Fosgate
Part Number
T400-4
Series
Power
Configuration
4-Channel
Power Output @ 2Ω
100W × 4 channels ✓
Power Output @ 4Ω
Not specified
Bridged Output
Not specified
Amplifier Class
Not specified
MOSFET Power Supply
Yes
MOSFET Output Stage
Yes
Crossover
24dB/Octave
2/4 Channel Input Switch
Yes
Power/Ground Connectors
4 Gauge
Speaker Connections
Audiophile Grade
Thermal Management
Dynamic Thermal Management
Chassis
Compact — Under-Seat Capable
Signal-to-Noise Ratio
Not specified
THD
Not specified
Frequency Response
Not specified
Dimensions
Not specified
Weight
Not specified
Warranty
Not specified
Compatible With / Goes Well With
Suitable system configurations:
Full 4-way front and rear speaker system (full-range crossover setting)
Front stage component speakers (high-pass) + rear subwoofers (low-pass via crossover)
Under-seat, centre console, or space-constrained installations where Dynamic Thermal Management allows reliable operation
Comparing T400-4 vs T400X4AD:
T400-4: Confirmed 100W×4 @ 2Ω, 4-gauge wiring, Dynamic Thermal Management, conventional design — suited to standard car audio builds with 4-gauge wiring infrastructure
T400X4AD (Class-AD): Ultra-compact, 8 AWG wiring, high-level auto turn-on, C.L.E.A.N. clip detection, PLC2 remote — suited to hybrid/EV, UTV, motorcycle, and OEM integration builds
Pairs well with:
Rockford Fosgate or aftermarket component front speakers (4Ω or 2Ω)
Rear subwoofers or coaxial speakers for the rear channels
4-gauge amplifier wiring kits
Rockford Fosgate or aftermarket 4-channel RCA cables
Frequently Asked Questions
What is the confirmed power output of the T400-4?
Rockford Fosgate confirms 100W per channel into 2Ω, for a total of 400W across four channels. Power output at 4Ω and the bridged mono output rating are not confirmed in the supplier data — pull the official T400-4 datasheet for the full power specification table.
What does Dynamic Thermal Management mean for installation flexibility?
Dynamic Thermal Management actively reduces amplifier output as temperature rises — rather than a hard shutdown — allowing the T400-4 to sustain operation in confined spaces like under front seats where heat dissipation is limited. The amplifier trades peak output for continuous operation in hot or restricted environments.
What is the difference between the T400-4 and the T400X4AD?
Both are Rockford Fosgate Power series 400W 4-channel amplifiers. The T400-4 is a conventional design with confirmed 100W×4 @ 2Ω, 4-gauge connectors, and Dynamic Thermal Management. The T400X4AD is the Class-AD ultra-compact variant with 8 AWG connectors, high-level auto turn-on, C.L.E.A.N. clip detection, and specific design for hybrid vehicles, UTVs, and motorcycles. The right choice depends on your installation environment and integration requirements.
Can the T400-4 run both front speakers and rear subwoofers simultaneously?
Yes. This is one of the T400-4's designed use cases — front channels in high-pass mode driving component speakers, rear channels in low-pass mode driving subwoofers. The built-in 24dB/octave crossover provides the frequency separation required for this configuration without external processing.
What gauge wiring does the T400-4 require?
The T400-4 uses 4-gauge power and ground connectors. A minimum of 4-gauge cable is recommended for the power and ground runs. Confirm the specific cable length and fuse requirements for your installation with Rockford Fosgate's wiring guide or your installer.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Rockford Fosgate T1000X5ad Power 1000W Class-AD 5-Channel Amplifier Constant Power, Element Ready, Complete System Solution
Product Overview
The Rockford Fosgate T1000X5ad is a 1000 Watt RMS 5-channel amplifier from the flagship Power series, built on Rockford Fosgate's proprietary Class-AD platform delivering unprecedented sound quality with superior power efficiency across five channels in an ultra-compact chassis. Designed for the broadest possible vehicle application range hybrid and electric vehicles, small cars, trucks, motorcycles, and side-by-side UTVs the T1000X5ad is Rockford Fosgate's Element Ready 5-channel solution for complete system builds where a single, compact, high-output amplifier needs to power everything.
Class-AD Constant Power technology delivers the same output at both 4-ohm and 2-ohm impedance loads across all channels, and can exceed rated power by up to 25% additional output per channel providing consistent, predictable performance regardless of speaker impedance without the need for recalculation. A Class-BD subwoofer channel handles the low-frequency demands of the 5th channel at high efficiency. Differential high-level inputs with Auto Turn-On, Remote-Out, C.L.E.A.N. input/output clip detection, integrated high/low-pass crossovers, on-board Punch EQ, input channel configuration switches, real-time Rollback thermal protection, dual fan forced induction cooling, dual extruded heatsinks, upgraded RCA connectors, PLC2 remote level control compatibility, CEA-2006 and CE compliance, and discrete surface mount construction complete an amplifier engineered to be the permanent core of any Power series system build.
Key Specifications
Channels: 5 (4 full-range + 1 subwoofer)
Total power: 1000W RMS
Full-range channel topology: Class-AD (proprietary)
Subwoofer channel topology: Class-BD
Constant Power: Yes same output at 4-ohm and 2-ohm
Constant Power overrate capability: Up to 25% additional output per channel
Crossover: Integrated high-pass and low-pass
Punch EQ: Built-in boost circuit
Input switch: 4/2 channel configuration
Inputs: Low-level RCA + high-level differential (with auto turn-on)
Remote-Out: Yes (when using high-level inputs)
RCA connectors: Upgraded
C.L.E.A.N.: Input + output clip detection with LED indicators
Thermal protection: Real-time thermal sensing with Rollback technology
Cooling: Dual fan forced induction + dual extruded heatsinks
Remote level control: PLC2 compatible (sold separately)
Control panel: Top-mounted
Construction: Discrete surface mount technology
Element Ready: Yes
CEA-2006 compliant: Yes
CE compliant: Yes
Rated power (per channel): Confirm with supplier
Dimensions: Confirm with supplier
Shipping weight: Confirm with supplier
Features & Benefits
Rockford Fosgate proprietary Class-AD with Constant Power across 4 full-range channels: Class-AD delivers the same output at both 4-ohm and 2-ohm speaker impedances across all four full-range channels simultaneously eliminating impedance-dependent power variation. Combined with the ability to exceed rated power by up to 25% additional output per channel, the T1000X5ad provides consistent, high-headroom performance regardless of speaker impedance, making it a genuinely versatile 5-channel solution across the widest possible range of Australian vehicle builds.
Class-BD subwoofer channel: The dedicated 5th channel uses Class-BD topology for high-efficiency, low-heat bass output consistent with the PM1000X5 Punch Marine 5-channel amplifier and a step above running a subwoofer on a Class-A/B channel at equivalent power levels. More power to the subwoofer, less heat in the amplifier.
Up to 25% additional output per channel beyond rated power: Rockford Fosgate's Constant Power platform can exceed the rated RMS figure by up to 25% per channel a genuine dynamic headroom advantage over amplifiers that throttle at their rated output. For music with high crest factors, this translates to more impactful transients and more lifelike dynamics from the same amplifier.
Element Ready: Validated against Rockford Fosgate's Element Ready standard: dust, UV, temperature, water, corrosion, and vibration resistance. Designed for installation in the harshest vehicle environments motorcycles, UTVs, powersport vehicles, and trucks where standard amplifiers would be compromised by the elements.
Differential high-level inputs with Auto Turn-On: Differential design rejects common-mode noise and ground loop interference common in OEM electrical systems particularly important in hybrid and electric vehicles where high-voltage electrical architecture can introduce interference into low-voltage audio circuits. Auto Turn-On eliminates the need for a dedicated remote wire from the head unit.
Remote-Out feature: Outputs a remote turn-on signal to downstream components when using high-level inputs useful in complex multi-component system builds where a dedicated head unit remote output is unavailable.
C.L.E.A.N. input and output clip detection with LED indicators: Simultaneous input and output THD monitoring for accurate gain structure setup and ongoing clip detection during use consistent with the Power Marine TM-series standard and a step above input-only C.L.E.A.N. found on the Punch Marine amplifier range.
Real-time thermal sensing with Rollback technology: Continuously monitors operating temperature and progressively reduces output before a full protection shutdown maintaining audio at a reduced level rather than cutting off entirely. A critical reliability feature for Element Ready installations in extreme thermal environments including UTVs, motorcycles, and Australian summer conditions.
Dual fan forced induction with dual extruded heatsinks: Active forced air cooling via dual fans combined with dual extruded heatsinks provides comprehensive thermal management for five channels of output in the compact chassis required for Element Ready vehicle installations.
Integrated high/low-pass crossovers with input channel configuration switches: On-board crossover management and input configuration switches allow the T1000X5ad to be tailored to a wide range of system configurations without external signal processors. The input switch allows two RCA inputs to drive all five channels consistent with the PM1000X5 and TM400X4ad.
Built-in Punch EQ boost circuit: On-board bass boost without an external equaliser consistent with the broader Rockford Fosgate amplifier range and particularly useful in open-air UTV, motorcycle, and truck installations where low-frequency energy dissipates rapidly.
Upgraded RCA connectors: Higher-quality connectors reducing signal degradation and improving long-term connection reliability in high-vibration Element Ready installations.
PLC2 remote level control compatible: Optional Rockford Fosgate PLC2 for dash-mounted subwoofer output level control with input clip indicator. Sold separately.
CEA-2006 and CE compliant: Power ratings comply with the CEA-2006 industry standard for car amplifiers. CE compliance confirms conformity with European safety and electromagnetic compatibility standards both are verified, comparable specifications.
Discrete surface mount technology construction: Compact, vibration-resistant circuit board assembly contributing to both the Element Ready chassis dimensions and long-term reliability in high-vibration motorcycle, UTV, and off-road installations.
Designed for hybrid and electric vehicles: The differential input design and high-level input noise rejection capability make the T1000X5ad specifically well-suited to hybrid and electric vehicle audio systems where OEM electrical architecture commonly introduces interference into standard aftermarket amplifier inputs.
Technical Specs
Specification
Detail
SKU
T1000X5ad
Brand
Rockford Fosgate
Number of Channels
5 (4 full-range + 1 subwoofer)
Total Power
1000W RMS
Full-Range Channel Topology
Class-AD (proprietary)
Subwoofer Channel Topology
Class-BD
Constant Power
Yes 4-ohm and 2-ohm
Constant Power Overrate
Up to 25% additional output per channel
Crossover
Integrated HP/LP
Punch EQ
Built-in boost circuit
Input Switch
4/2 channel configuration
Signal Input
Low-level RCA + high-level differential
Auto Turn-On
Yes (via high-level input)
Remote-Out
Yes (when using high-level inputs)
RCA Connectors
Upgraded
C.L.E.A.N.
Input + output clip detection with LED indicators
Thermal Protection
Real-time thermal sensing with Rollback technology
Cooling
Dual fan forced induction + dual extruded heatsinks
Remote Level Control
PLC2 compatible (sold separately)
Control Panel
Top-mounted
Construction
Discrete surface mount technology
Element Ready
Yes
CEA-2006 Compliant
Yes
CE Compliant
Yes
Rated Power (per channel)
Confirm with supplier
Dimensions
Confirm with supplier
Shipping Weight
Confirm with supplier
Warranty
Confirm with supplier
Compatible With
Hybrid and electric vehicles requiring OEM integration with noise-rejecting differential inputs
Motorcycles, UTVs, side-by-sides, and powersport vehicles requiring Element Ready amplification
Small cars and trucks requiring a complete single-amplifier 5-channel system solution
Factory and aftermarket head units with RCA or high-level outputs
Rockford Fosgate Power series speakers (4 full-range channels 4-ohm or 2-ohm)
Rockford Fosgate Power series subwoofers (5th Class-BD channel)
Downstream components triggered via Remote-Out in complex multi-component system builds
Optional Rockford Fosgate PLC2 Punch Level Control (sold separately)
Frequently Asked Questions
What makes the T1000X5ad suitable for hybrid and electric vehicles? The T1000X5ad uses differential high-level inputs that reject common-mode noise and ground loop interference a specific advantage in hybrid and electric vehicles where high-voltage OEM electrical architecture commonly introduces interference into standard aftermarket amplifier inputs. The Element Ready construction also qualifies it for the more demanding thermal and vibration environments of these vehicle types.
What is the Constant Power overrate capability and how does it benefit music playback? Constant Power delivers the same output at 4-ohm and 2-ohm impedances, and can exceed rated RMS power by up to 25% additional output per channel. For music with high dynamic range and transient peaks which can demand significantly more instantaneous power than a steady-state RMS signal this headroom translates to more impactful, lifelike dynamics from the same amplifier without clipping.
How does the T1000X5ad differ from the PM1000X5 Punch Marine 5-channel amplifier? Both are 1000W 5-channel amplifiers with Class-A/B or Class-AD full-range channels and a dedicated subwoofer channel. The T1000X5ad is a Power series amplifier on the Class-AD Constant Power platform with Element Ready construction and CEA-2006 compliance, designed for the broadest vehicle application range including hybrid, electric, UTV, and motorcycle. The PM1000X5 is a Punch Marine amplifier with marine-grade conformal PCB coating and stainless steel hardware, designed specifically for marine and motorsport environments. Choose based on your primary installation environment.
What does Rollback thermal protection do differently from a standard thermal shutdown? Standard thermal protection shuts the amplifier down completely when temperatures rise. Rollback progressively reduces output power as temperatures approach the threshold maintaining audio at a reduced level rather than cutting off entirely. In Element Ready UTV, motorcycle, and truck installations where ambient temperatures can spike significantly, Rollback keeps the system running where a standard shutdown would cut out.
Is a remote level control included with the T1000X5ad? No. The optional PLC2 Punch Level Control is sold separately and connects to the dedicated remote control input for subwoofer output level adjustment with input clip indicator from a convenient dash or mounting location.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
1,000W Class-AD 4-Channel Full-Range Amplifier Class-A Sound Quality, Class-D Efficiency, Constant Power, 2-Year Warranty.
Product Overview
The Rockford Fosgate Power T1000-4AD is a 1,000W 4-channel full-range amplifier built on Rockford Fosgate's Class-AD technology an amplifier topology combining the sound quality characteristics of a Class-A design with the power efficiency of Class-D. Where Class-BD was developed for brute subwoofer power, Class-AD is Rockford Fosgate's answer for high-fidelity, full-range speaker amplification designed for front stage component systems, full-range 4-way installations, and any application where audio quality across the full frequency spectrum is the priority.
Sound quality is enhanced through dynamic switching frequency control a technique that optimises the amplifier's internal switching frequency dynamically for improved linearity and reduced audible artefacts. Constant Power circuitry produces optimised output across a range of impedances. Combined with MOSFET power supply and output stages, 24dB/octave crossover, RCA pass-thru, and a confirmed 2-year warranty, the T1000-4AD is Rockford Fosgate's premium full-range 4-channel Power series amplifier.
Key Specifications
Power output: 1,000W total (4-channel — per-channel rated power at specific impedance not confirmed — see Red-flags)
Amplifier class: Class-AD (Class-A sound quality + Class-D efficiency)
Configuration: 4-channel, full-range
Constant Power: Yes — optimised output across a range of impedances
Dynamic switching frequency control: Yes
Crossover: 24dB/octave
2/4 channel input switch: Yes
RCA pass-thru outputs: Yes
MOSFET power supply: Yes
MOSFET output stage: Yes
Power/ground connectors: 4 gauge
Speaker connections: Audiophile grade
Signal-to-noise ratio: Not specified — confirm with Rockford Fosgate
THD: Not specified — confirm with Rockford Fosgate
Frequency response: Not specified — confirm with Rockford Fosgate
Dimensions: Not specified — confirm with Rockford Fosgate
Weight: Not specified — confirm with Rockford Fosgate
Warranty: 2 years ✓
Features & Benefits
Class-AD — Class-A Sound Quality with Class-D Efficiency — Class-A amplifiers are widely regarded for their linearity and low distortion but are thermally inefficient and physically large. Class-D amplifiers are highly efficient but have historically made compromises in audio quality. Rockford Fosgate's Class-AD combines the sonic characteristics of Class-A operation with the power efficiency of Class-D — delivering high-fidelity full-range amplification in a format suited to demanding car audio installations.
Dynamic Switching Frequency Control — A proprietary technique that dynamically adjusts the amplifier's internal switching frequency to optimise linearity and minimise switching-related artefacts — contributing to the Class-AD's high-fidelity performance across the full audio frequency range. This is the technical mechanism that distinguishes Class-AD's audio quality from standard Class-D designs.
Constant Power — Optimised Output Across Impedances — The Constant Power circuitry maintains optimised output across a range of speaker impedance loads — providing consistent performance whether 4Ω or 2Ω speakers are connected, without the significant power variation seen in standard amplifier designs at different load impedances.
1,000W 4-Channel Full-Range Configuration — 250W per channel (total rated — confirm per-channel at specific impedance from the official datasheet) across four full-range channels. Designed for high-output front and rear speaker systems where component speakers or full-range coaxials require substantial clean power to achieve their performance potential.
RCA Pass-Thru Outputs — Signal pass-through allows the headunit RCA signal to be looped to a downstream amplifier — enabling the T1000-4AD to drive four speaker channels while simultaneously feeding a dedicated subwoofer amplifier for a complete multi-amplifier system.
24dB/Octave Crossover — Steep crossover slope for precise frequency band management — enabling high-pass filtering on front and rear speakers and the option to configure rear channels for subwoofer use in mixed speaker/subwoofer builds.
2/4 Channel Input Switch — Accepts either a 2-channel stereo input (internally distributed to all four outputs) or discrete 4-channel front and rear RCA inputs — accommodating both 2-channel and 4-channel headunit preamp configurations.
MOSFET Power Supply and Output Stage — MOSFET implementation across both supply and output stages supports the high-current, low-noise delivery required for Class-AD's high-fidelity operation.
4 Gauge Power and Ground Connectors — Appropriate power delivery infrastructure for a 1,000W 4-channel amplifier.
Audiophile Grade Speaker Connections — High-quality output terminals across all four channels for low-resistance, high-integrity speaker connections.
2-Year Warranty — Confirmed manufacturer warranty — two years of coverage on Rockford Fosgate's flagship full-range 4-channel Power series amplifier.
Technical Specs
Specification
Detail
Brand
Rockford Fosgate
Part Number
T1000-4AD
Series
Power
Configuration
4-Channel, Full-Range
Amplifier Class
Class-AD
Power Output (Total)
1,000W
Power per Channel @ 2Ω
Not specified — confirm with Rockford Fosgate
Power per Channel @ 4Ω
Not specified — confirm with Rockford Fosgate
Bridged Output
Not specified — confirm with Rockford Fosgate
Constant Power
Yes
Dynamic Switching Frequency Control
Yes
Crossover
24dB/Octave
2/4 Channel Input Switch
Yes
RCA Pass-Thru Outputs
Yes
MOSFET Power Supply
Yes
MOSFET Output Stage
Yes
Power/Ground Connectors
4 Gauge
Speaker Connections
Audiophile Grade
Signal-to-Noise Ratio
Not specified
THD
Not specified
Frequency Response
Not specified
Dimensions
Not specified
Weight
Not specified
Warranty
2 Years ✓
Compatible With / Goes Well With
Designed for:
High-fidelity full-range front and rear speaker systems
Front stage component speaker systems requiring high-power, low-distortion amplification
Multi-amplifier builds: T1000-4AD for speaker channels + dedicated mono sub amp via RCA pass-thru
Demanding audiophile-oriented car audio builds where audio quality is the primary concern
Pairs well with:
Rockford Fosgate Power series mono subwoofer amplifiers (T1000-1BDCP, T1500-1BDCP, T2500-1BDCP) via RCA pass-thru
Rockford Fosgate Power series component front stage speakers
4-gauge amplifier wiring kits
Rockford Fosgate or aftermarket 4-channel RCA cables
Frequently Asked Questions
What does Class-AD mean and why does it matter for full-range speakers?
Class-AD combines the sound quality characteristics of Class-A amplification with the power efficiency of Class-D. Class-A designs are highly linear and produce very low distortion but are thermally inefficient. Class-D is efficient but involves switching-based operation that can introduce artefacts. Rockford Fosgate's Class-AD and its dynamic switching frequency control aim to deliver high-fidelity full-range performance with efficient power delivery — a meaningful advantage for component speaker systems that operate across the full 20Hz–20kHz range.
What is dynamic switching frequency control?
Dynamic switching frequency control is a technique where the amplifier dynamically adjusts its internal switching frequency based on the signal being amplified. This optimises linearity at each operating point, reducing the audible by-products of switching-mode amplification — contributing to the Class-AD's high-fidelity performance compared to standard fixed-frequency Class-D designs.
What is the confirmed per-channel power output of the T1000-4AD?
The total rated power is 1,000W across four channels. Per-channel power at 2Ω and 4Ω is not confirmed in the supplier data — pull the official Rockford Fosgate T1000-4AD datasheet for the full power specification table, including per-channel RMS at each impedance.
How does the T1000-4AD differ from the T600-4?
The T1000-4AD delivers 1,000W total (vs the T600-4's 600W), uses Rockford Fosgate's Class-AD technology with dynamic switching frequency control, and is specifically designed for high-fidelity full-range use. Both include RCA pass-thru. The T600-4 uses a conventional MOSFET design. For audiophile-oriented builds where audio quality is the priority, the T1000-4AD is the appropriate choice.
Is the T1000-4AD suitable for running subwoofers on the rear channels?
Yes. The 24dB/octave crossover allows the rear channels to be configured in low-pass mode for subwoofer use. However, the T1000-4AD's primary design intent is high-fidelity full-range speaker amplification via Class-AD technology — for dedicated subwoofer channels, a Class-BD mono amplifier (T1000-1BDCP, T1500-1BDCP, T2500-1BDCP) connected via the RCA pass-thru is the more appropriate and more powerful solution.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Polk Audio PA D Series 5-Channel Class D Amplifier: Polk Audio PA Series Amplifiers - Power & Style Without Compromise The Polk PA Series amplifiers were conceived, designed & engineered to deliver premium audio with unparalleled detail & reliability. Polk Audio PA D5000.5 Features: 5-channel car amplifier 70 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 100 watts RMS x 4 + 400 watts RMS x 1 at 2 ohms 200 watts RMS x 2 in bridged mode at 4 ohms + 500 watts RMS x 1 at 1 ohm Variable gain, high-pass filter (40-400 Hz 12 dB/octave), and low-pass filter (80-4000 Hz, 12 dB per octave) for front channels Variable gain and high-pass filter (40-4000 Hz 12 dB/octave) for rear channels Variable gain, low-pass filter (40-220 Hz, 12 dB/octave) and subsonic filter (20-38 Hz) for subwoofer channel Wired remote subwoofer level control Preamp inputs Fuse rating: 40A x 2 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier 14-1/8"W x 1-13/16"H x 6-3/4"D Small Amp That'll Power Your Whole System Polk's PA D5000.5 5-channel amplifier may be small, but it can power your complete system, sending 70 watts RMS to each of your front and rear speakers and up to 500 watts RMS to a sub. Or, you can switch this little beast to 3-channel mode to drive a couple high-level components with 200 watts RMS each and still have that 500 watts RMS left over for the bass. Best of all, this powerhouse will fit in almost any location in your vehicle because of its convenient size and shape. Handsome with A Clear Voice Polk's Class D amp technology helps this amp reproduce music very cleanly, with no added coloration or distortion. Adjustable high- and low-pass filters help you to tune your system, keeping bass away from full-range speakers and high notes away from subs.You'll find that the subsonic filter's a big help for tuning your sub in a ported enclosure. Polk includes a wired remote, so you can control the subwoofer level from your front seat. This amp's tough, good-looking stainless steel case won't tarnish, even in very humid conditions. What's In The Box: Five channel amplifier Remote bass level control 17' Remote bass level control cable Four 40 amp ATO fuses (2 installed/ 2 extra) Four 1" Self-tapping screws Owner's manual (English/ French/ Spanish/ German/ Italian/ Portuguese) On-line product registration information
Legendary Products & Support From Authorized Dealers
When you choose Polk Audio, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Polk Audio dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Polk Audio's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Polk Audio dealer today!
The ZXM Amplifiers Are Made To Be As Small As Possible Without Compromising Sound Quality, Power And Functions The ZXM700.5 is an impressive 5-channel Mini Amplifier. Despite its ultra-compact chassis, the ZXM700.5 delivers over 700W RMS, providing all the features and power you would expect from a full-size 5-channel amplifier. The Pinnacle of Power and Precision Introducing the ZXM700.5, the latest marvel in our ZXM Family. After extensive development and refinement, this 5-channel amplifier sets new standards in compact audio engineering. Despite its ultra-compact chassis, the ZXM700.5 delivers over 700W RMS, providing all the features and power you would expect from a full-size 5-channel amplifier. Experience the perfect synergy of size, performance, and versatility with the ZXM700.5. Features: Unmatched Power in a Compact Design: The ZXM700.5 is designed to fit seamlessly into any setup, offering over 700W RMS while maintaining a remarkably small footprint. Ideal for those who demand high performance without compromising space. Comprehensive Channel Configuration: The amplifier supports 4 or 5-channel inputs, allowing for flexible integration into any audio system. Whether you're driving a full speaker system or adding a subwoofer, the ZXM700.5 has you covered. Advanced Audio Control: Equipped with high-pass (HP) and low-pass (LP) filters for all channels, ensuring precise tuning and exceptional sound quality. Tailor your audio experience with ease and precision. Versatile Input Options: The ZXM700.5 handles both high-level and low-level inputs, making it compatible with a wide range of audio sources and installation configurations. Remote Gain Control for Sub Channel: Adjust your bass levels on the fly with the included remote gain controller, providing instant access to deep, rich bass. Superior Sound Quality: Enjoy crystal-clear audio with a signal-to-noise ratio exceeding 90dB and minimal total harmonic distortion. The ZXM700.5 ensures every note is reproduced with stunning clarity and accuracy. Quick and Easy Installation: Featuring a specially designed quick connector for the power, ground and remote, the ZXM700.5 makes installation fast and hassle-free, saving you time and effort.
Legendary Products & Support From Authorized Dealers
When you choose Phoenix Gold, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Phoenix Gold dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Phoenix Gold's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Phoenix Gold dealer today!
Experience Big Sound in a Small Package with the ZXM500.4 Class-D Mini Amplifier The ZXM500.4 is an impressive Class-D 4-channel Mini Amplifier. The ZXM amplifiers are made to be as small as possible without compromising sound quality, power and functions. The ZXM500.4 is a 4-channel amplifier with a total power of 500W RMS. This equals 4x80W RMS in 4Ohm but the amplifier is stable into 2Ohm and then delivers 4x125W RMS. The 4 channels can also be bridged into 2x250W RMS in 4Ohm. The amplifier comes with adjustable HP/ LP filters and also a switch to use 2ch input or 4ch input low or high level. A high level of engineering has gone into making these amps with low EMI emissions to not interfere with the advanced electronics or FM signal. Introducing the ZXM500.4, a groundbreaking Class-D 4-channel Mini Amplifier that redefines the standards of power, performance, and compact design in audio amplification. The ZXM series is engineered with a paramount focus on delivering exceptional sound quality without compromise. The ZXM series is engineered with a paramount focus on delivering exceptional sound quality without compromise. The ZXM500.4, in particular, showcases an impressive total power output of 500W RMS, allowing you to experience a new auditory experience. Additionally, this versatile amplifier offers the flexibility of bridging the 4 channels to yield an impressive 2x250W RMS in 4Ohm, catering to diverse audio setups and preferences. In addition to its impressive technical specifications, the ZXM500.4 is designed with practicality in mind. Its ultra-small form factor facilitates effortless installation, making it an ideal choice for setups where space is at a premium. The AutoStart functionality on high-level input simplifies usage, ensuring hassle-free operation. From Full Class-D technology optimizing efficiency to exceptional signal-to-noise ratio and minimal distortion, the ZXM500.4's specs speak volumes about its commitment to top-tier audio performance. The ZXM500.4 doesn't compromise on safety either. It comes equipped with an array of protective measures, including short circuit, thermal, and high/low voltage protection, ensuring the longevity of the amplifier while prioritizing user safety. Beyond its exceptional power and performance, this amplifier boasts an engineering marvel by minimizing electromagnetic interference (EMI). This ensures that the amplifier operates without interference, preserving the integrity of advanced electronics and FM signals, maintaining audio quality. the ZXM500.4 stands as a pinnacle of innovation, engineering, and performance in the realm of Class-D amplifiers. With its compact size, staggering power output, advanced features and engineering, it elevates audio experiences to new heights. The ZXM500.4 is an impressive Class-D 4-channel Mini Amplifier. The ZXM amplifiers are made to be as small as possible without compromising sound quality, power and functions. The ZXM500.4 is a 4-channel amplifier with a total power of 500W RMS. This equals 4x80W RMS in 4Ohm but the amplifier is stable into 2Ohm and then delivers 4x125W RMS. The 4 channels can also be bridged into 2x250W RMS in 4Ohm. The amplifier comes with adjustable HP/ LP filters and also a switch to use 2ch input or 4ch input low or high level. Phoenix Gold ZXM500.4 Features: Massive Power & Performance Full Class-D technology offers efficiency & performance Short circuit/thermal and high/low voltage protection Excellent signal-to-noise ratio and FM noise rejection Built-in protection LED light status indicator Surface mount component technology Ultra small size for easy installation Autostart on high-level input Full adjustable HP & LP filter Phoenix Gold ZXM500.4 Specifications: Class-D 4-Channel Mini Amplifier Power (MAX) 1000W Power Ratings (RMS) 125W x 4 @ 2Ohm 80W x 4 @ 4Ohm 250W x 2 @ 4Ohm bridged Frequency Response: 20Hz – 20kHz Signal to Noise Ratio: > 90dB Total Harmonic Distortion: < 0.3% Low Pass Filter: 40Hz – 400Hz (12dB/Oct) High Pass Filter: 40Hz – 400Hz (12dB/Oct) High-Level Input Auto Turn-On Dimensions (LxWxH) 165 x 83.1 x 34.8mm
Legendary Products & Support From Authorized Dealers
When you choose Phoenix Gold, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Phoenix Gold dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Phoenix Gold's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Phoenix Gold dealer today!
Designed to Be a True Worldwide Product! Orion 1600W 4-channel XTR series class A/B stereo amplifier. Specifications: RMS Power Rating: ¢ 4 ohms: 130 watts x 4 chan. ¢ 2 ohms: 200 watts x 4 chan. ¢ Bridged, 4 ohms: 400 watts x 2 chan. Max power output: 1600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on/turn-off Bass boost circuit with tri-mode capabilities Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy duty aluminum alloy heat-sink for extreme heat dissipation Variable high-pass filter (50-400 Hz, 12 dB/octave) Variable low-pass filter (50-400 Hz, 12 dB/octave) Heavy duty gauge direct-wire with high current power and speaker terminals CEA-2006 compliant amplifier Dimensions: 9-5/16"D x 14-5/16"L x 2-1/2"H
Legendary Products & Support From Authorized Dealers
When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Orion dealer today!
Proud to Be Loud!
Orion XTR amplifier 4 channel 500 watts RMS.
Legendary Products & Support From Authorized Dealers
When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Orion dealer today!
Designed to Be a True Worldwide Product! Orion 700W 4-channel XTR series A/B stereo amplifier. Specifications: RMS Power Rating: ¢ 4 ohms: 65 watts x 4 chan. ¢ 2 ohms: 90 watts x 4 chan. ¢ Bridged, 4 ohms: 180 watts x 2 chan. Max power output: 700 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on/turn-off Bass boost circuit with tri-mode capabilities Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy duty aluminum alloy heat-sink for extreme heat dissipation Variable high-pass filter (50-400 Hz, 12 dB/octave) Variable low-pass filter (50-400 Hz, 12 dB/octave) Heavy duty gauge direct-wire with high current power and speaker terminals CEA-2006 compliant amplifier Dimensions: 9-5/16"D x 10-1/8"L x 2-1/2"H
Legendary Products & Support From Authorized Dealers
When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Orion dealer today!
Designed to Be a True Worldwide Product! Orion 2400W 4-channel XTR series class A/B stereo amplifier. Specifications: RMS Power Rating: ¢ 4 ohms: 200 watts x 4 chan. ¢ 2 ohms: 300 watts x 4 chan. ¢ Bridged, 4 ohms: 600 watts x 2 chan. Max power output: 2400 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on/turn-off Bass boost circuit with tri-mode capabilities Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy duty aluminum alloy heat-sink for extreme heat dissipation Variable high-pass filter (50-400 Hz, 12 dB/octave) Variable low-pass filter (50-400 Hz, 12 dB/octave) Heavy duty gauge direct-wire with high current power and speaker terminals CEA-2006 compliant amplifier Dimensions: 9-5/16"D x 17-7/16"L x 2-1/2"H
Legendary Products & Support From Authorized Dealers
When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Orion dealer today!
High-Performance Multi-Channel Class D Amplifier from JBL!
Class D DesignEvery Stadium amplifier, including the full-range models, features high-efficiency Class D topology. This technology allows JBL to engineer amplifiers that are more compact, generate less heat, and draw less current from the vehicle’s electrical system.
Low DistortionJBL Stadium amplifiers have been engineered to deliver the lowest distortion possible, enhancing the audio experience regarldess of output level.
Full On-Board ProtectionJBL Stadium amplifiers have on-board circuitry to protect from shorts, temperature, overvoltage and undervoltage. An LED indicator is included on all five models to let the user know when one of these conditions exists.
Proprietary High-Conductivity TerminalsAll JBL Stadium amplifiers come equipped with newly introduced E.A.R.L terminal for better grounding. For 5-channel and mono amplifiers, adapter connector is available in the box for easy installation.
Compact footprintWith it becoming more and more difficult to find spacious locations for amplifier mounting, JBL Stadium amplifiers have been developed in a small compact form factor to allow more location versatility.
Sleek designSometimes, an amp can be as stylish as it is powerful. JBL Stadium amplifiers have a clean, streamlined industrial design.
Full-Range Line OutputsThe full-range Stadium amplifiers (Stadium 5, Stadium 4 and Stadium 2) include full-range line outputs. This allows the audio signal to be routed to additional amplifiers or self-powered subwoofer solutions, increasing your system configuration options.
Uncover Great Sound (The Unveiling of Sound)Stadium mono and full-range, multi-channel amplifiers deliver the efficiency and power you expect from Class D amplifiers – and the performance you expect from JBL. The comprehensive all new E.A.R.L terminal and power adapter (5-channel & mono block) enables easy installation and optimized performance. For the 5-channel and mono amplifier models, the remote bass control allows the user to increase and decrease bass output independent of head unit tone controls. The industrial design not only provides an elegant look, but also enhances power dissipation to ensure long term reliability. Stadium amplifiers give you power to shape your car audio experience in new ways.
JBL Stadium 5 Specifications:
JBL Stadium 5
Class-D Full Range 4-Ohm Stable 5-Channel Amplifier
RMS Power Rating:
4 ohms: 75 watts x 4 chan. (200 watts x 1 chan.)
2 ohms: 100 watts x 4 chan. (350 watts x 1 chan.)
1 ohm: _ watts x _ chan.
1 ohm: ————N/A————
Bridged, 4 ohms: 200 watts x 2 chan. (350 watts x 1)
Total power output: 2300 watts
CEA-2006 Compliant Amplifier
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
EARL Ground Terminal and Power Block
5/4/3/2 channel operation
Speaker-level (high-level) inputs
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy duty aluminum alloy heat-sink for extreme heat dissipation
Input sensitivity: 0.2V – 2V
Frequency Response: 10 – 320 Hz
Total Harmonic Distortion (THD): 0.01%
Signal to Noise Ratio: 80dB
Variable high-pass filter: 32 – 320 Hz, 12 dB/octave
Variable low-pass filter: 32 – 320 Hz, 12 dB/octave
Variable Bass Boost: 0 to +9 dB bass boost at 45 Hz
Fuse Rating: 30 A x 3
4 gauge power and ground wiring is recommended for installation
Power Specifications – Full Range Channels
RMS Power @ 4 ohms 75 watts x 4 channel
RMS Power @ 2 ohms 100 watts x 4 channel
Bridged RMS Power 200 watts x 2 channel
Power Specifications – Subwoofer Channel
RMS Power @ 4 ohms 200 watts x 1 channel
RMS Power @ 2 ohms 350 watts x 1 channel
RMS Power @ .5 ohm
Power Specifications – Subwoofer Channel
Peak Power @ .5 ohm
Amplifier Specifications
Amplifier Series JBL Stadium Series
Marine Certified No
Amplifier Class D
Number of Channels 5
Total Peak Power Output 2300 watts
Maximum Input Gauge Size 4 AWG
Minimum Impedance Unbridged 2 ohms
Minimum Impedance Bridged 4 ohms
Speaker Level Inputs Yes
Preamp Outputs 1 pair
Built-in Crossover Low-Pass (LP), High-Pass (HP)
High-Pass Crossover Frequency 32 – 320 Hz
Low-Pass Crossover Frequency 32 – 320 Hz
Signal-to-Noise Ratio 80 dB
Bass Boost 0 – 9 dB
Remote bass/level controller Yes
Fan Cooled No
Fuse Rating 30A x 3
Total Fuse Rating 90
Strappable No
CEA-2031 Compliant Yes
Amp Bluetooth Connectivity No
Hi-Res Certified No
What’s in the box:
Amplifier
Wired gain knob (wire attached)
Mounting screws (4)
Three spare fuses
User manual
Legendary Products & Support From Authorized Dealers
When you choose JBL, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized JBL dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by JBL's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized JBL dealer today!
