Rockford Fosgate P3-2X12 Punch Dual P3 12" Vented Loaded Enclosure 1200 Watts of Genuine Punch Bass Product Overview The Rockford Fosgate P3-2X12 is a dual 12" vented loaded enclosure housing two genuine Punch P3 subwoofers (P3D4-12), delivering a combined 1200 Watts RMS and 2400 Watts peak power handling in a single factory-built, computer-tuned enclosure. Pre-wired internally to a 1-ohm load, it is designed to be driven hard by a compatible high-output mono amplifier making it the most direct path to serious, high-output Punch bass performance without building a custom enclosure or sourcing drivers and boxes separately. The P3-2X12 uses the same P3D4-12 drivers sold individually in the Rockford Fosgate range, housed in a vented enclosure tuned via computer-aided design software for optimised low-frequency output and port efficiency. The proprietary high-flow, low-noise port minimises port turbulence and chuffing at high output levels a common weakness in cheaper dual 12" vented enclosures. Constructed from 5/8" MDF with high-density carpet finish and high-current binding posts up to 10 AWG, the P3-2X12 is built for serious daily use in Australian vehicles where boot space and amplifier output are not a constraint. Key Specifications Subwoofers: Dual 12" Rockford Fosgate Punch P3 (P3D4-12) Woofer quantity: 2 Power handling: 1200W RMS / 2400W peak Pre-wired impedance: 1 ohm (internally wired) Enclosure type: Vented Construction: 5/8" MDF Finish: High-density carpet Port: Proprietary high-flow, low-noise Input terminals: Up to 10 AWG high-current compression binding posts Dimensions (H x W x D): 38.4 x 86.0 x 40.0 cm Shipping weight: 40.66 kg CEA-2031 compliant Features & Benefits Dual 12" Punch P3 drivers (P3D4-12): The same genuine P3D4-12 woofers available as standalone drivers, factory-loaded and tuned as a matched pair in a single enclosure. No compromise on driver quality identical P3 tonal performance to a custom build, straight out of the box. 1200W RMS / 2400W peak combined power handling: Built for serious amplifier output. Pre-wired to 1 ohm, the P3-2X12 is ready to handle the output of a high-power mono amplifier delivering the kind of bass output level that commands attention in any Australian vehicle. Vented enclosure for maximum low-frequency output: The vented (ported) design produces higher output at the tuning frequency compared to a sealed enclosure, delivering the loud, impactful bass preferred for high-output systems in larger vehicle boot spaces. Proprietary high-flow, low-noise port: Engineered specifically for this enclosure to minimise port turbulence and chuffing at high output levels. At 1200W RMS combined input, port noise is a real issue in budget dual 12" enclosures the P3-2X12's proprietary port design addresses this directly. Computer-aided design tuning: Enclosure volume, port dimensions, and geometry are calculated specifically for the P3D4-12 driver pair, ensuring the vented alignment is optimised for maximum output and accuracy at the intended tuning frequency rather than approximated. Pre-wired to 1 ohm: Factory internal wiring presents a 1-ohm load to the amplifier, maximising power delivery from compatible mono amplifiers. No internal wiring configuration required connect your amplifier and go. CEA-2031 compliant: Power handling figures comply with the CEA-2031 standard for loaded subwoofer enclosures, providing a verified and comparable specification. 5/8" MDF construction: Rigid enclosure walls minimise panel flex, resonance, and vibration at the sustained high output levels this enclosure is designed for. Essential for accurate, tight bass reproduction at 1200W RMS combined input. High-density carpet finish: Durable, professional appearance that integrates cleanly into vehicle boot and cargo area environments for daily use. High-current 10 AWG compression binding posts: Appropriate for the significant current demands of a 1200W RMS, 1-ohm system. Secure, reliable connections at the wattage and current levels this enclosure operates at. Technical Specs Specification Detail SKU P3-2X12 Brand Rockford Fosgate Subwoofer Drivers 2 x 12" Rockford Fosgate Punch P3 (P3D4-12) Woofer Quantity 2 Power Handling 1200W RMS / 2400W peak Pre-Wired Impedance 1 ohm (internally wired) Enclosure Type Vented Port Type Proprietary high-flow, low-noise Construction Material 5/8" MDF Finish High-density carpet Input Terminals Up to 10 AWG high-current compression binding posts Enclosure Design Computer-aided design tuned CEA-2031 Compliant Yes Dimensions (H x W x D) 38.4 x 86.0 x 40.0 cm Shipping Weight 40.66 kg Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 1 ohm, rated at or near 1200W RMS Rockford Fosgate Power and Punch series high-output mono amplifiers Sedans, SUVs, wagons, and utes with full boot or cargo area space available Vehicles with upgraded electrical systems to support sustained high-current amplifier draw Rockford Fosgate wiring kits rated for high-current 1-ohm mono amplifier installation Rockford Fosgate RCA cables and signal accessories Frequently Asked Questions What amplifier does the P3-2X12 require? The P3-2X12 is pre-wired to 1 ohm and handles 1200W RMS combined. A high-output mono amplifier stable at 1 ohm and rated at or near 1200W RMS is required such as a compatible Rockford Fosgate Power series mono amplifier. Do not exceed 2400W peak input. Are the drivers in the P3-2X12 the same as the standalone P3 subwoofers? Yes. The P3-2X12 is loaded with genuine Rockford Fosgate P3D4-12 drivers the same woofers available separately in the Punch P3 range. Factory loading provides the same tonal performance as a custom build using individual P3D4-12 drivers in a computer-tuned vented enclosure. Why choose a vented enclosure over a sealed enclosure? A vented enclosure produces higher output at the tuning frequency compared to a sealed enclosure of equivalent driver and amplifier power, making it the preferred choice for maximum bass impact and volume in larger vehicle boot spaces. Sealed enclosures offer tighter, more accurate bass but at lower output levels. How does the proprietary port reduce noise at high output? The proprietary high-flow, low-noise port is designed with optimised geometry to minimise air turbulence as it passes through the port at high excursion levels. This reduces the chuffing and port noise common in budget vented enclosures when driven at or near rated power maintaining clean bass output at high volumes. Is the P3-2X12 suitable for daily use in an Australian vehicle? Yes, provided your vehicle has sufficient boot space (38.4 x 86.0 x 40.0 cm minimum clearance) and your electrical system is upgraded to support a high-output 1-ohm mono amplifier. At 40.66 kg, professional installation is recommended for safe handling and secure mounting. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Two channels. BRT efficiency. Built for motorcycles, ATVs, and stealth installs. Product Overview The Rockford Fosgate PBR300X2 is a 2-channel amplifier from the Punch series, delivering 300W total using Rockford Fosgate's patented BRT (Boosted Rail Technology). Unlike conventional 2-channel amplifiers that rely on a switching power supply to generate their output, BRT achieves rated power through an ultra-efficient design that eliminates the switching stage entirely resulting in a chassis significantly smaller than a traditional amplifier of equivalent output. Total power is 300W across two channels; power per channel and impedance breakdown are not specified in supplier-provided data. The PBR300X2 is positioned for installations where space and electrical draw are primary constraints. Motorcycles requiring stereo speaker output, ATVs, and recreational vehicles with limited mounting real estate are the target use cases along with stealth car and marine builds where a standard amplifier chassis simply won't fit. The variable 4–6V hi-level DC offset turn-on circuit allows direct integration with OEM speaker outputs in systems that don't provide a dedicated remote turn-on wire, while high-level inputs eliminate the need for an aftermarket head unit or RCA outputs. A 12dB/octave Butterworth crossover and MOSFET output stage complete a practical, installation-friendly feature set. Key Specifications Channels: 2 Total output power: 300W (power per channel and impedance breakdown — not specified) Power supply technology: BRT (Boosted Rail Technology — no switching power supply) Output stage: MOSFET Crossover: 12dB/octave Butterworth (frequency range — not specified) Signal input: High level Turn-on method: Variable hi-level DC offset (4–6V) Chassis: Ultra-compact Bridgeable: Not specified Frequency response: Not specified Input sensitivity: Not specified Nominal impedance: Not specified CEA compliance: Not specified in provided data Power wire gauge: Not specified Speaker wire gauge: Not specified Operating voltage: Not specified Recommended fuse: Not specified Dimensions: Not specified Features & Benefits BRT (Boosted Rail Technology) — No Switching Power Supply — The PBR300X2 uses Rockford Fosgate's patented BRT architecture to produce rated power without a conventional switching power supply. This reduces current draw, minimises electrical noise, and shrinks the chassis to a fraction of the size of a traditional 2-channel amplifier — making it viable for vehicle types and install locations that would otherwise rule out amplification entirely. Ultra-Compact Chassis — Stereo Power in a Stealth Footprint — Where the PBR300X1 delivers mono output for a single driver, the PBR300X2 provides two independent channels from the same compact BRT platform. This makes it the logical choice for motorcycle stereo builds — left and right speaker channels from a single unit that installs in a saddlebag, underseat compartment, or within a fairing. Exact dimensions are not specified in supplier data — confirm with Rockford Fosgate before planning a space-critical install. Variable Hi-Level DC Offset Turn-On (4–6V) — Motorcycles, ATVs, and many OEM car audio systems either lack a dedicated remote turn-on output or carry a DC offset on their speaker outputs. The PBR300X2's variable DC offset circuit detects a 4–6V signal on the speaker inputs and uses it to power the amplifier — removing the need to source and run a remote wire in installations where doing so is difficult or impossible. High-Level Inputs — Accepts signal directly from the speaker outputs of a factory head unit, OEM radio, or handlebar-mounted controller. No line output converter or aftermarket head unit is required, keeping the installation simple and the component count low — particularly relevant for motorcycle and recreational vehicle builds where simplicity and reliability matter. MOSFET Output Stage — The MOSFET output stage contributes to the compact, efficient character of the PBR300X2 and handles the variable voltage and vibration conditions common in motorcycle and off-road vehicle environments more reliably than earlier output stage designs. It also supports the BRT architecture's low-heat operating profile. 12dB/Octave Butterworth Crossover — The on-board Butterworth crossover allows the two output channels to be filtered, directing appropriate frequency ranges to different speakers in a system. The crossover frequency range is not specified in supplier data — confirm with Rockford Fosgate before planning a multi-speaker install. Technical Specs Specification Detail Channels 2 Total output power 300W Power per channel Not specified Power by impedance Not specified Power supply BRT — no switching power supply Output stage MOSFET Circuit topology Not specified Frequency response Not specified Input sensitivity Not specified THD+Noise Not specified Nominal impedance Not specified Bridgeable Not specified Crossover type 12dB/octave Butterworth Crossover frequency range Not specified Signal input High level Turn-on method Variable hi-level DC offset, 4–6V CEA compliance Not specified Power wire gauge Not specified Speaker wire gauge Not specified Operating voltage Not specified Recommended fuse Not specified Dimensions Not specified Weight 4.3 kg Compatible With / Goes Well With The PBR300X2 is confirmed by the manufacturer for use in the following applications: Motorcycles requiring 2-channel (stereo) speaker amplification ATVs and off-road recreational vehicles Smaller stealth car, marine, or custom installations with limited space OEM/factory audio systems (via variable hi-level DC offset turn-on) Goes well with: Compact 2-channel speakers suited to motorcycle, ATV, or stealth car audio builds Factory head units and OEM audio systems (high-level input compatible) Marine or weatherproof speaker enclosures for recreational vehicle applications Frequently Asked Questions What is BRT (Boosted Rail Technology) and why does it matter for a 2-channel amp? BRT is Rockford Fosgate's patented amplifier architecture that generates rated power without a switching power supply. The result is a significantly smaller and more efficient chassis than a conventional 2-channel amplifier — making stereo amplification viable in motorcycles, ATVs, and stealth builds where space and current draw are limited. How much power does each channel produce? Total power is 300W across both channels. The per-channel power rating and impedance breakdown are not specified in supplier-provided data. Contact Rockford Fosgate or your authorised dealer to confirm per-channel output before matching to speakers. Will the PBR300X2 work on a motorcycle or ATV? Yes. The PBR300X2 is specifically designed for motorcycles, ATVs, and recreational vehicles. The BRT architecture's low current draw and ultra-compact chassis make it practical for these applications, and the variable DC offset turn-on circuit supports OEM systems that lack a standard remote turn-on output. What is the variable DC offset turn-on circuit? Many motorcycle and OEM systems output a 4–6V DC offset on their speaker lines rather than a dedicated remote turn-on signal. The PBR300X2 detects this voltage and uses it to power the amplifier automatically — eliminating the need to wire a separate remote turn-on lead in most factory and recreational vehicle installations. Can the PBR300X2 be used in a standard car or truck installation? Yes, though it is engineered primarily for space-constrained and stealth applications. It suits any car or truck installation where a compact chassis, low current draw, and factory head unit compatibility are priorities. Standard amplifier features such as RCA inputs, Punch EQ, and remote level control are not confirmed in supplier data — verify the full feature set with Rockford Fosgate if these are required. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P300-12T Punch 12" 300 Watt Powered Truck Enclosure When your truck cab needs serious bass without sacrificing every centimetre of under-seat space, the P300-12T packs a high-output 12" woofer and 300-watt Class D amplifier into a slim sealed enclosure purpose-built for truck installations. Product Overview The P300-12T is Rockford Fosgate's all-in-one powered subwoofer enclosure designed specifically for the dimensional constraints of truck under-seat and behind-seat installations. The slim wedge profile enclosure is precision constructed from 5/8" MDF and houses a 12" proprietary woofer impedance-optimised for the integrated 300-watt Class D amplifier in a closed-loop design, ensuring the driver and amplifier work together as a matched system from the factory. The sealed enclosure delivers tight, accurate bass with a 35-200 Hz frequency response, well suited to the acoustic environment of a truck cabin. Control is handled via an onboard variable Low-Pass crossover (50-200 Hz), a Bass EQ with 0 to +12 dB of onboard boost, and a 0-180 degree phase switch on the amplifier plate, while the included Punch Level Control remote puts bass adjustment in the driver's hand. An intelligent auto turn-on/off circuit with three selectable modes (Remote Trigger, DC Offset Sense, and Audio Sense) eliminates the need for a dedicated remote turn-on wire in OEM installations. Separate RCA and high-level speaker inputs make it compatible with both aftermarket and factory head units. Quick-release input connections allow the enclosure to be disconnected and removed quickly when the cargo area is needed. The heat-activated vinyl finish resists marks and wear in daily use. CEA-2006 (amplifier) and CEA-2031 (woofer) compliant, Klippel verified, with a 1-year warranty. Features & Benefits 300-Watt Class D Amplifier with Closed-Loop Design: The integrated amplifier is an impedance-matched, closed-loop Class D design tuned specifically for the P300-12T's proprietary 12" woofer, ensuring maximum efficiency and precise driver control at all output levels from within the slim enclosure footprint. Slim Wedge Enclosure for Truck Applications: The low-profile wedge enclosure is dimensioned to fit under or behind seats in truck applications where vertical clearance is limited, delivering full-size 12" subwoofer performance without occupying the cab's usable space. Klippel Verified Woofer: The 12" proprietary woofer has been verified through the Klippel certification programme, which measures and corrects non-linear distortion parameters to deliver the best possible transient accuracy and low-frequency output from an optimised, impedance-matched driver. Sealed Enclosure for Tight, Accurate Bass: The sealed MDF enclosure delivers a controlled, accurate bass response suited to the enclosed acoustic space of a truck cab, with tighter low-frequency transients than a ported design and a frequency response extending down to 35 Hz. Intelligent Auto Turn-On/Off: Three selectable turn-on modes (Remote Trigger, DC Offset Sense, and Audio Sense) allow the P300-12T to power on automatically in any installation scenario, including factory head units without a dedicated remote output, eliminating additional wiring complexity. Variable Low-Pass Crossover: Continuously variable from 50 to 200 Hz at 12 dB/octave Butterworth, the onboard crossover integrates cleanly with full-range speakers across virtually any crossover point set by the main system amplifier or head unit. Onboard Bass EQ: 0 to +12 dB of onboard bass boost corrects for acoustic deficiencies in the vehicle interior and adds presence to the low-frequency output without an external equaliser. Phase Switch: A 0 to 180 degree phase control allows the subwoofer to be time-aligned with the main speakers acoustically, compensating for physical placement differences in the truck cab for a coherent, integrated bass response. Included Punch Level Control Remote: The Punch Level Control is included in the box, allowing bass output to be adjusted from the driver's seat in real time without accessing the amplifier plate directly. Quick-Release Input Connections: Input connections use quick-disconnect fittings, allowing the enclosure to be removed from the vehicle quickly when cargo space is needed, without tools or cable work. High and Low-Level Inputs: Separate RCA (low-level, 150mV-6V) and speaker-level (high-level, 300mV-12V) inputs via a single RCA pair summed L/R support both aftermarket and OEM head unit installations from the same unit. Thermal and Over/Under Voltage Protection: Onboard protection monitors both operating temperature and supply voltage, shutting the amplifier down safely before damage occurs under fault conditions. Precision MDF Enclosure with Vinyl Finish: Constructed from 5/8" Medium Density Fiberboard for optimal acoustic properties, covered with a heat-activated vinyl finish that resists marks and scuffs in daily truck use. CEA-2006 and CEA-2031 Compliant: Amplifier power ratings conform to CEA-2006 industry standards at 14.4V with 1% or less THD. Woofer power handling conforms to CEA-2031, confirming both ratings are real, tested figures. Technical Specs Specification Detail SKU P300-12T Series Punch Woofer Size 12" Woofer Quantity 1 Woofer Series Proprietary Power Handling 300W RMS Integrated Amplifier 300W RMS Amplifier Class Class D Enclosure Type Sealed Enclosure Material 5/8" MDF Enclosure Finish Heat-Activated Vinyl Frequency Response 35 Hz - 200 Hz Low-Pass Crossover Variable 50-200 Hz @ 12 dB/octave Butterworth Bass EQ 0 to +12 dB (frequency centre not specified in source data) Phase Control 0 to 180 degrees Input Switch High-Level (Speaker) / Low-Level (RCA) Signal Input 1 x RCA Pair (L/R Summed) Input Sensitivity (Low-Level) 150 mV - 6V Input Sensitivity (High-Level) 300 mV - 12V Input Impedance 20k Ohms Auto Turn-On Selector Remote Trigger / DC Offset Sense / Audio Sense Remote Control Punch Level Control (included) Visual Indicators POWER / PROTECT LED Heatsink Type Extruded Aluminium Cooling Convection Power Wire Gauge 8 AWG (B+/GND), 18 AWG (Remote) Power Input Connector Quick Disconnect Fuses 20A total (2 x 10A ATO) Compliance CEA-2006 (amplifier), CEA-2031 (woofer), Klippel Verified Dimensions (H x W x D1 x D2) 15" x 25.8" x 4.8" x 8.5" (380 mm x 656 mm x 122 mm x 215 mm) Shipping Weight 32 lbs (14.5 kg) Warranty 1 Year Bass EQ frequency flag: The source data confirms the Bass EQ range as 0 to +12 dB but does not specify a centre frequency. The P500-12P lists this as 45 Hz. Please verify with the supplier whether the P300-12T shares the same 45 Hz centre before publishing. Goes Well With The P300-12T is designed as a standalone bass solution and requires no separate subwoofer amplifier or enclosure. For factory head unit installations, the high-level speaker inputs and Audio Sense auto turn-on allow direct connection without additional interface hardware. For aftermarket head unit installations, the RCA input connects directly from the head unit's subwoofer pre-out. To complement the P300-12T with front and rear speaker amplification, the PBR400X4D or R2-300X4 pair naturally via a standard RCA pre-out from the head unit. An 8-gauge power and ground cable run to the battery is required, along with the 2 x 10A ATO fuses included in the box. Frequently Asked Questions Is the P300-12T designed specifically for trucks, and will it fit other vehicles? The P300-12T is purpose-built for truck applications, with a slim wedge profile that fits under or behind seats in truck cabs where clearance is limited. It can physically fit in other vehicles, but Rockford Fosgate's intended application is trucks. For hatchbacks, sedans, and SUVs requiring a larger powered enclosure with a ported design, the P500-12P is the recommended alternative. Why is a sealed enclosure used in the P300-12T rather than a ported design? The sealed enclosure is chosen for the truck application because it provides tighter, more controlled bass response suited to the enclosed acoustic environment of a truck cab, and allows the slim wedge profile to be maintained within tight dimensional constraints. A sealed design also offers more forgiving power handling characteristics and gentler roll-off below the tuning frequency compared to a ported enclosure. Can the P300-12T be connected directly to a factory head unit? Yes. The high-level speaker inputs accept signal from the factory head unit's speaker outputs directly, and the Audio Sense or DC Offset Sense auto turn-on modes allow the enclosure to power on without a dedicated remote turn-on wire. This makes the P300-12T a direct plug-in upgrade for OEM truck systems without requiring head unit replacement. What are the three auto turn-on modes, and which should I use? Remote Trigger mode powers the amplifier on when a 12V signal is received at the remote input terminal, requiring a remote turn-on wire from the head unit. DC Offset Sense mode detects a DC voltage change on the high-level speaker input to trigger turn-on, suitable for OEM systems where the speaker output changes state when the head unit powers on. Audio Sense mode detects an incoming audio signal on the input and triggers turn-on automatically, making it the most universal option for both OEM and aftermarket installations without a dedicated remote output. What is Klippel Verification, and why does it matter for a powered enclosure? Klippel is an independent speaker measurement and certification programme that identifies and corrects non-linear distortion parameters in speaker drivers, including suspension non-linearities and motor force variation across the cone's travel range. In a sealed powered enclosure where the driver and amplifier are a matched system, Klippel verification confirms that the woofer's performance envelope has been accurately measured and optimised to deliver clean, low-distortion bass at the rated 300 watts across its operating range.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P300-10T Punch 10" 300 Watt Powered Truck Enclosure When your truck needs real bass in a compact, self-contained package, the P300-10T fits a high-output 10" woofer and 300-watt Class D amplifier into a slim sealed enclosure built for universal truck applications. Product Overview The P300-10T is Rockford Fosgate's all-in-one powered subwoofer enclosure designed for the dimensional constraints of truck under-seat and behind-seat installations. The slim wedge profile enclosure is precision constructed from 5/8" MDF and houses a 10" proprietary woofer impedance-optimised for the integrated 300-watt Class D amplifier in a closed-loop design, ensuring the driver and amplifier work together as a matched system from the factory. The sealed enclosure delivers tight, controlled bass with a 35-200 Hz frequency response suited to the acoustic environment of a truck cabin. An onboard variable Low-Pass crossover (50-200 Hz), Bass EQ with 0 to +12 dB of boost, and a 0-180 degree phase switch are accessible on the amplifier plate, while the included Punch Level Control remote handles bass adjustment from the driver's seat. An intelligent auto turn-on/off circuit with three selectable modes (Remote Trigger, DC Offset Sense, and Audio Sense) eliminates the need for a dedicated remote turn-on wire in OEM installations. Separate RCA and high-level speaker inputs make it compatible with both aftermarket and factory head units. Quick-release input connectors allow the enclosure to be removed quickly when cargo space is needed. The heat-activated vinyl finish resists marks in daily use. CEA-2006 (amplifier) and CEA-2031 (woofer) compliant, Klippel verified, with a 1-year warranty. Features & Benefits 300-Watt Class D Amplifier with Closed-Loop Design: The integrated amplifier is an impedance-matched, closed-loop Class D design tuned specifically for the P300-10T's proprietary 10" woofer, ensuring maximum efficiency and precise driver control at all output levels within the slim enclosure footprint. High-Efficiency, Low Current Amplifier Design: The Class D amplifier topology keeps current consumption low relative to output, making the P300-10T compatible with stock electrical systems in trucks where alternator capacity is not upgraded. Slim Wedge Enclosure for Truck Applications: The low-profile wedge enclosure is dimensioned to fit under or behind seats in truck applications where vertical clearance is limited, delivering a genuine 10" subwoofer performance footprint without consuming the full usable cab space. Klippel Verified Woofer: The 10" proprietary woofer has been verified through the Klippel certification programme, which measures and corrects non-linear distortion parameters to deliver the best possible transient accuracy and low-frequency output from an optimised, impedance-matched driver. Sealed Enclosure for Tight, Accurate Bass: The sealed MDF enclosure provides controlled, accurate bass reproduction suited to the enclosed acoustic space of a truck cab, with tighter low-frequency transients than a ported design and a frequency response extending down to 35 Hz. Intelligent Auto Turn-On/Off: Three selectable turn-on modes (Remote Trigger, DC Offset Sense, and Audio Sense) allow the P300-10T to power on automatically in any installation scenario, including factory head units without a dedicated remote output. Variable Low-Pass Crossover: Continuously variable from 50 to 200 Hz at 12 dB/octave Butterworth, the onboard crossover integrates cleanly with full-range speakers across virtually any crossover point set by the main system amplifier or head unit. Onboard Bass EQ: 0 to +12 dB of onboard bass boost corrects for acoustic deficiencies in the vehicle interior and adds presence to the low-frequency output without an external equaliser. Phase Switch: A 0 to 180 degree phase control allows the subwoofer to be time-aligned with the main speakers acoustically, compensating for physical placement differences in the truck cab for a coherent, integrated bass response. Included Punch Level Control Remote: The Punch Level Control is included in the box, allowing bass output to be adjusted from the driver's seat in real time without accessing the amplifier plate directly. Quick-Release Input Connections: Input connections use quick-disconnect fittings, allowing the enclosure to be removed from the vehicle quickly when cargo space is needed, without tools or cable work. High and Low-Level Inputs: Separate RCA (low-level, 150mV-6V) and speaker-level (high-level, 300mV-12V) inputs via a single RCA pair summed L/R support both aftermarket and OEM head unit installations from the same unit. Thermal and Over/Under Voltage Protection: Onboard protection monitors both operating temperature and supply voltage, shutting the amplifier down safely before damage occurs under fault conditions. Precision MDF Enclosure with Vinyl Finish: Constructed from 5/8" Medium Density Fiberboard for optimal acoustic properties, covered with a heat-activated vinyl finish that resists marks and scuffs in daily truck use. CEA-2006 and CEA-2031 Compliant: Amplifier power ratings conform to CEA-2006 industry standards at 14.4V with 1% or less THD. Woofer power handling conforms to CEA-2031, confirming both ratings are real, tested figures. Technical Specs Specification Detail SKU P300-10T Series Punch Woofer Size 10" Woofer Quantity 1 Woofer Series Proprietary Power Handling 300W RMS Integrated Amplifier 300W RMS Amplifier Class Class D Enclosure Type Sealed Enclosure Material 5/8" MDF Enclosure Finish Heat-Activated Vinyl Frequency Response 35 Hz - 200 Hz Low-Pass Crossover Variable 50-200 Hz @ 12 dB/octave Butterworth Bass EQ 0 to +12 dB Phase Control 0 to 180 degrees Input Switch High-Level (Speaker) / Low-Level (RCA) Signal Input 1 x RCA Pair (L/R Summed) Input Sensitivity (Low-Level) 150 mV - 6V Input Sensitivity (High-Level) 300 mV - 12V Input Impedance 20k Ohms Auto Turn-On Selector Remote Trigger / DC Offset Sense / Audio Sense Remote Control Punch Level Control (included) Visual Indicators POWER / PROTECT LED Heatsink Type Extruded Aluminium Cooling Convection Power Wire Gauge 8 AWG (B+/GND), 18 AWG (Remote) Power Input Connector Quick Disconnect Fuses 20A total (2 x 10A ATO) Compliance CEA-2006 (amplifier), CEA-2031 (woofer), Klippel Verified Dimensions (H x W x D1 x D2) 13.3" x 21.7" x 4.8" x 7.9" (338 mm x 552 mm x 122 mm x 201 mm) Shipping Weight 25 lbs (11.3 kg) Warranty 1 Year Goes Well With The P300-10T is a standalone bass solution requiring no separate subwoofer amplifier or enclosure. For factory head unit installations, the high-level speaker inputs and Audio Sense auto turn-on allow direct connection without additional interface hardware. For aftermarket head unit installations, the RCA input connects directly from the head unit's subwoofer pre-out. To complement the P300-10T with front and rear speaker amplification, the PBR400X4D or R2-300X4 pair naturally via a standard RCA pre-out from the head unit. For installations requiring a larger 12" driver in the same truck enclosure format, the P300-12T is the direct step-up option. An 8-gauge power and ground cable run to the battery is required, along with the 2 x 10A ATO fuses included in the box. Frequently Asked Questions How does the P300-10T differ from the P300-12T? Both the P300-10T and P300-12T are 300-watt powered truck enclosures sharing the same amplifier specification, feature set, enclosure material, and installation approach. The primary difference is driver size: the P300-10T uses a 10" woofer in a smaller enclosure (13.3" x 21.7"), while the P300-12T uses a 12" woofer in a larger enclosure (15" x 25.8"). The 10" option suits trucks with tighter under-seat clearance, while the 12" option is preferred where space allows and maximum low-frequency output is the priority. Can the P300-10T be connected directly to a factory head unit? Yes. The high-level speaker inputs accept signal from the factory head unit's speaker outputs directly, and the Audio Sense or DC Offset Sense auto turn-on modes allow the enclosure to power on without a dedicated remote turn-on wire. This makes the P300-10T a straightforward plug-in bass upgrade for OEM truck systems without requiring head unit replacement. What are the three auto turn-on modes, and which should I use? Remote Trigger mode powers the amplifier on when a 12V signal is received at the remote input terminal, requiring a remote turn-on wire from the head unit. DC Offset Sense mode detects a DC voltage change on the high-level speaker input to trigger turn-on, suitable for OEM systems where the speaker output changes state when the head unit powers on. Audio Sense mode detects an incoming audio signal and triggers turn-on automatically, making it the most universal option for both OEM and aftermarket installations without a dedicated remote output. Does the quick-release connector system allow me to remove the enclosure without rewiring? Yes. The quick-release input and power connectors allow the P300-10T to be disconnected and removed from the vehicle without tools or disturbing the permanent wiring. This is particularly practical in truck applications where the under-seat or behind-seat space is frequently needed for passengers or cargo, allowing the subwoofer to be reinstalled just as quickly. What is Klippel Verification, and why does it matter for a powered enclosure? Klippel is an independent speaker measurement and certification programme that identifies and corrects non-linear distortion parameters in speaker drivers, including suspension non-linearities and motor force variation across the cone's travel range. In a sealed powered enclosure where the driver and amplifier are a matched system, Klippel verification confirms that the woofer's performance envelope has been accurately measured and optimised to deliver clean, low-distortion bass at the rated 300 watts across its full operating range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

15" Punch P2 and P3 Stamped Steel Grille Insert Black. Fits Gen-3 P2 and P3 Trim Rings. Protects Against Cone and Surround Damage. Product Overview The Rockford Fosgate P2P3G-15 is a 15" stamped steel mesh grille insert in black designed for Gen-3 Punch P2 and P3 standard-depth 15" subwoofers. The grille inserts into the diamond-cut cast aluminium trim ring already fitted to the subwoofer no additional hardware required. The trim ring (included with the P2 or P3 subwoofer) holds the grille securely in position. Compatible with both the Punch P2 and Punch P3 15" platforms this single grille SKU covers both ranges. This grille is for standard-depth P2 and P3 15" subwoofers not the P3S shallow series, which uses the P3SG range. Compatible with Gen-3 trim rings specifically confirm the generation of your subwoofer before purchasing. Key Specifications Part number: P2P3G-15 Compatible size: 15 inch (standard depth) ✓ Grille type: Stamped mesh insert ✓ Material: Stamped steel ✓ Colour: Black ✓ Fitment: Inserts into Gen-3 P2 and P3 trim rings ✓ Trim ring required: Yes — trim ring supplied with subwoofer ✓ Generation compatibility: Gen-3 P2 and P3 only ✓ Compatible series: Punch P2 and Punch P3 (15") ✓ Protection: Surround and cone damage ✓ Compatible SKUs: Select Gen-3 P2 and P3 15" models — confirm with Rockford Fosgate Pack quantity: Not confirmed — confirm with Rockford Fosgate Dimensions: Not confirmed — confirm with Rockford Fosgate Weight: Not confirmed Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits Covers Both P2 and P3 15" Platforms A single grille SKU compatible with both the Punch P2 (P2D2-15, P2D4-15) and Punch P3 (P3D2-15, P3D4-15) 15" subwoofers — both series use the same Gen-3 trim ring dimensions. Confirm exact compatibility with Rockford Fosgate. Stamped Steel Mesh — Physical Cone and Surround Protection The rigid steel mesh shields the 15" Kevlar (P2) or anodised aluminium (P3) cone and rubber surround from physical contact with boot cargo. Boot installations with 15" subwoofers typically have limited clearance — the grille provides protection in these confined, high-traffic environments. Trim Ring Insertion — Tool-Free Install Remove the trim ring from the subwoofer, insert the grille, re-secure the trim ring. No tools required. Reversible at any point for inspection or cleaning. Gen-3 Specific Sizing Sized for Gen-3 P2 and P3 trim rings only — not compatible with earlier-generation trim rings or the P3S shallow series. Confirm your subwoofer's generation before purchasing. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P2P3G-15 Series Punch P2 and P3 (Standard) Gen-3 Compatible Size 15 inch ✓ Grille Type Stamped Mesh Insert ✓ Material Stamped Steel ✓ Colour Black ✓ Fitment Inserts into Gen-3 P2 and P3 trim rings ✓ Trim Ring Required Yes (supplied with subwoofer) ✓ Generation Gen-3 P2 and P3 only ✓ Compatible Series Punch P2 and Punch P3 (15") ✓ Compatible SKUs Select Gen-3 models (confirm with Rockford Fosgate) Pack Quantity Not confirmed Dimensions Not confirmed Weight Not confirmed Warranty Not confirmed Compatible With / Goes Well With Confirmed compatible platform: Gen-3 Punch P2 and P3 15" standard-depth subwoofers — confirm specific SKUs with Rockford Fosgate Likely compatible (confirm before purchasing): Rockford Fosgate P2D2-15 Punch P2 15" 2-Ohm DVC Subwoofer Rockford Fosgate P2D4-15 Punch P2 15" 4-Ohm DVC Subwoofer Rockford Fosgate P3D2-15 Punch P3 15" 2-Ohm DVC Subwoofer Rockford Fosgate P3D4-15 Punch P3 15" 4-Ohm DVC Subwoofer Frequently Asked Questions Does the trim ring come with the P2P3G-15? No — the grille inserts into the trim ring already supplied with the P2 or P3 15" subwoofer. The P2P3G-15 is the grille insert only. Is this grille compatible with both P2 and P3 15" subwoofers? Yes — the P2P3G-15 is confirmed compatible with both Gen-3 Punch P2 and Punch P3 15" subwoofers. Both series use the same Gen-3 trim ring dimensions. Confirm exact compatible SKUs with Rockford Fosgate. Will this grille fit P3S shallow subwoofers? No — the P3S shallow series uses a different trim ring and requires the P3SG range (P3SG-8, P3SG-10, P3SG-12). The P2P3G-15 is for standard-depth P2 and P3 subwoofers only. Is the P2P3G-15 sold as a single unit or a pair? Pack quantity is not confirmed. Confirm from the official Rockford Fosgate P2P3G-15 product page before ordering. Are grille inserts available for 10" and 12" P2 and P3 subwoofers? Equivalent grille SKUs for 10" and 12" P2/P3 models may be available — confirm with Rockford Fosgate. The P2P3G-15 is specific to the 15" platform. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

15" 4-Ohm DVC Punch P2 Subwoofer 400W RMS, Kevlar Cone, VAST, Dual Spider, Diamond-Cut Cast Aluminium Trim Ring, Extended Pole Piece. Product Overview The Rockford Fosgate Punch P2D4-15 is a 15" 4-Ohm Dual Voice Coil (DVC) subwoofer rated at 400W RMS the 4-Ohm variant of the 15" Punch P2 platform. Identical construction to the P2D2-15 with the sole difference being 4-Ohm voice coil impedance per coil, providing wiring options of 2-Ohm (parallel), 8-Ohm (series), or 4-Ohm per coil for bi-amplification no 1-Ohm stability requirement. Optimised for sealed and vented enclosures. Sold as an individual unit. A 15" subwoofer requires a substantially larger enclosure and installation space than smaller formats. Confirm enclosure volume requirements, mounting depth, and available space from the official Rockford Fosgate P2D4-15 datasheet before purchasing. All confirmed Punch P2 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with Nomex® reinforcement collar, dual linear spider with embedded 16 AWG tinsel leads, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, diamond-cut cast aluminium trim ring with grille provision, and protective PVC textured magnet cover. Key Specifications Subwoofer size: 15 inch Voice coil configuration: Dual Voice Coil (DVC) Impedance: 4-Ohm per coil (2-Ohm parallel / 8-Ohm series / 4-Ohm biamp) Power handling (RMS): 400W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Dual linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: Features: push — confirm vs compression with Rockford Fosgate Trim ring: Diamond-cut cast aluminium (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 4-Ohm DVC — Broad Amplifier Compatibility: 2-Ohm (parallel): Compatible with most 2-Ohm mono amplifiers 8-Ohm (series): For amplifiers with higher minimum impedance 4-Ohm per coil (biamp): Separate amplifier channels 400W RMS — Confirmed 400W RMS in the 15" format. 15" Cone — Maximum air movement and lowest frequency extension in the P2 range. Requires the largest enclosure in the Punch P2 catalogue. Dual Linear Spider — Improved compliance linearity and cone control at high excursion. Kevlar Fibre-Reinforced Paper Cone with VAST — Stiffened paper with up to 25% increased effective cone area. Nomex® Voice Coil Collar — Thermal and mechanical reinforcement at the voice coil junction. Extended Pole Piece and Bumped Vented Backplate — Increased Xmax; air spring prevention. Diamond-Cut Cast Aluminium Trim Ring — Premium machined finish with grille provision. StampCast Basket with Integrated Spider Venting — Motor cooling. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P2D4-15 Series Punch P2 Subwoofer Size 15 inch Voice Coil Dual Voice Coil (DVC) Impedance per Coil 4-Ohm ✓ Wiring Options 2-Ohm (parallel) / 8-Ohm (series) / 4-Ohm biamp ✓ Power Handling (RMS) 400W ✓ Peak Power Not specified Sensitivity Not specified Fs / Xmax / Qts Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified Mounting Depth Not specified Surround Technique VAST ✓ Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Dual Linear, Embedded 16 AWG Tinsel Leads ✓ Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals Features: push — confirm vs compression with Rockford Fosgate Trim Ring Diamond-Cut Cast Aluminium (Grille Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ CEA-2031 Compliant Not confirmed Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed and vented — both confirmed Wiring: 2-Ohm → parallel 8-Ohm → series 4-Ohm per coil → biamp Pairs well with: Rockford Fosgate T1500-1BDCP or T2500-1BDCP mono amplifiers — confirm 400W RMS at selected impedance Frequently Asked Questions What is the difference between P2D4-15 and P2D2-15? Both are identical 15" Punch P2 subwoofers at 400W RMS. The sole difference is impedance: P2D4-15 is 4-Ohm per coil (2-Ohm parallel / 8-Ohm series), P2D2-15 is 2-Ohm per coil (1-Ohm parallel / 4-Ohm series). The 4-Ohm DVC avoids the 1-Ohm parallel requirement, providing broader amplifier compatibility. What amplifier power is appropriate? 400W RMS at the selected wiring impedance. Confirm the amplifier's RMS output at 2-Ohm (parallel) before purchasing. What enclosure volume is required? Not confirmed. A 15" driver requires considerably more net internal volume than 10" or 12" formats. Pull the official Rockford Fosgate P2D4-15 datasheet. Is a grille available? The diamond-cut cast aluminium trim ring accommodates an optional grille insert. Confirm the SKU with Rockford Fosgate. Does the P2D4-15 suit a standard car boot installation? A 15" driver and its enclosure require significantly more space than 10" or 12" installations. Best suited to vehicles with generous boot space, custom builds, utes, vans, or trucks. Confirm installation dimensions before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

15" 2-Ohm DVC Punch P2 Subwoofer 400W RMS, Kevlar Cone, VAST, Dual Spider, Diamond-Cut Cast Aluminium Trim Ring, Extended Pole Piece. Product Overview The Rockford Fosgate Punch P2D2-15 is a 15" 2-Ohm Dual Voice Coil (DVC) subwoofer rated at 400W RMS the largest format in the Punch P2 range. The 15" cone moves significantly more air than the 10" and 12" P2 models, producing the greatest bass output and lowest frequency extension in the P2 series. The 2-Ohm DVC provides wiring options of 1-Ohm (parallel), 4-Ohm (series), or 2-Ohm per coil for bi-amplification. Optimised for sealed and vented enclosures. Sold as an individual unit. A 15" subwoofer requires a substantially larger enclosure and installation space than smaller formats. Confirm enclosure volume requirements, mounting depth, and available boot or cargo space from the official Rockford Fosgate P2D2-15 datasheet before purchasing. All confirmed Punch P2 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with Nomex® reinforcement collar, dual linear spider, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, diamond-cut cast aluminium trim ring with grille provision, and protective PVC textured magnet cover. Key Specifications Subwoofer size: 15 inch Voice coil configuration: Dual Voice Coil (DVC) Impedance: 2-Ohm per coil (1-Ohm parallel / 4-Ohm series / 2-Ohm biamp) Power handling (RMS): 400W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Dual linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: Features: push — confirm vs compression with Rockford Fosgate Trim ring: Diamond-cut cast aluminium (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 15" Cone — Maximum P2 Air Movement — The 15" format produces the greatest bass output and lowest frequency extension in the Punch P2 range. A 15" driver requires a substantially larger enclosure — confirm dimensions and installation space before purchasing. 400W RMS — Confirmed 400W RMS — the same power rating as the P2 12" models, reflecting the scaling of the larger motor to match the 400W tier across the P2 range. 2-Ohm DVC — Three Wiring Options: 1-Ohm (parallel): Both coils in parallel — confirm amplifier stable at 1-Ohm before use 4-Ohm (series): Broad amplifier compatibility 2-Ohm per coil (biamp): Separate amplifier channels Dual Linear Spider — Improved suspension compliance and cone control at high excursion. Kevlar Fibre-Reinforced Paper Cone with VAST — Kevlar stiffness and breakup resistance plus up to 25% increased effective cone area. Nomex® Voice Coil Collar — Thermal and mechanical reinforcement at the voice coil-to-cone junction. Extended Pole Piece and Bumped Vented Backplate — Extended pole for increased Xmax; vented backplate eliminates air spring compression. Diamond-Cut Cast Aluminium Trim Ring — Premium machined aluminium finish with grille insert provision. StampCast Basket with Integrated Spider Venting — Motor cooling during sustained operation. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P2D2-15 Series Punch P2 Subwoofer Size 15 inch Voice Coil Dual Voice Coil (DVC) Impedance per Coil 2-Ohm ✓ Wiring Options 1-Ohm (parallel) / 4-Ohm (series) / 2-Ohm biamp ✓ Power Handling (RMS) 400W ✓ Peak Power Not specified Sensitivity Not specified Fs / Xmax / Qts Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified — confirm with Rockford Fosgate Mounting Depth Not specified — confirm with Rockford Fosgate Surround Technique VAST ✓ Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Dual Linear, Embedded 16 AWG Tinsel Leads ✓ Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals Features: push — confirm vs compression with Rockford Fosgate Trim Ring Diamond-Cut Cast Aluminium (Grille Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ CEA-2031 Compliant Not confirmed Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed and vented — both confirmed Wiring: 1-Ohm → parallel (confirm amplifier stability) 4-Ohm → series 2-Ohm per coil → biamp Pairs well with: Rockford Fosgate T1500-1BDCP or T2500-1BDCP mono amplifiers — confirm RMS output at intended impedance matches 400W Frequently Asked Questions Does a 15" P2 subwoofer fit in a standard car boot? A 15" driver and its required sealed or vented enclosure occupy significantly more space than a 10" or 12" installation. The P2D2-15 is best suited to vehicles with dedicated boot space, custom enclosure builds, utes, vans, or trucks. Confirm the enclosure dimensions against available installation space before purchasing. What amplifier power is appropriate? 400W RMS at the selected wiring impedance. Confirm the amplifier's RMS output at 1-Ohm (parallel), 4-Ohm (series), or 2-Ohm per coil before purchasing. What enclosure volume is required? Enclosure volumes are not confirmed in the supplier data. A 15" driver requires considerably more net internal volume than 10" or 12" formats. Pull the official Rockford Fosgate P2D2-15 datasheet for sealed and vented recommendations. Is a grille available? The diamond-cut cast aluminium trim ring accommodates an optional grille insert. Confirm the compatible SKU with Rockford Fosgate. What terminal type does the P2D2-15 use? The features list states "nickel plated push terminals." The P2D4-10 spec table indicates "compression terminals" — a conflict present across the P2 range. Confirm with Rockford Fosgate across all P2 subwoofer models simultaneously. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

15" 4-Ohm SVC Punch Subwoofer 250W RMS, Kevlar Fibre-Reinforced Paper Cone, VAST, Nomex® Voice Coil Collar, Extended Pole Piece, 10-AWG Nickel Push Terminals. Product Overview The Rockford Fosgate Punch P1S4-15 is a 15" 4-Ohm Single Voice Coil (SVC) subwoofer rated at 250W RMS the 4-Ohm variant of the 15" Punch P1 platform. Identical construction to the P1S2-15 with the sole difference being the 4-Ohm voice coil impedance, providing broader amplifier compatibility. Optimised for sealed and vented enclosures. Sold as an individual unit. All confirmed Punch P1 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, 10-AWG nickel-plated push terminals, rubberized ABS trim ring with grille insert provision, and protective PVC textured magnet cover. Key Specifications Subwoofer size: 15 inch Voice coil configuration: Single Voice Coil (SVC) Impedance: 4-Ohm Power handling (RMS): 250W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: 10-AWG nickel-plated push terminals Trim ring: Rubberized ABS (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 4-Ohm SVC — Broad Amplifier Compatibility — A 4-Ohm SVC is compatible with most mono subwoofer amplifiers. Two P1S4-15 units in parallel = 2-Ohm; in series = 8-Ohm. 15" Cone — Maximum air movement in the P1 range for the greatest bass output and lowest frequency extension — suited to high-output and high-volume installations with sufficient enclosure space. 250W RMS — Confirmed 250W RMS sustained power handling. Kevlar Fibre-Reinforced Paper Cone — Kevlar reinforcement for improved stiffness and breakup resistance at high output. VAST — Up to 25% increased effective cone area. Nomex® Voice Coil Reinforcement Collar — Thermal and mechanical reinforcement at the voice coil-to-cone junction. Extended Pole Piece and Bumped Vented Backplate — Extended pole for increased Xmax; vented backplate eliminates air spring compression. 10-AWG Nickel-Plated Push Terminals — Heavier gauge for lower contact resistance. StampCast Basket with Integrated Spider Venting — Motor cooling during sustained operation. Rubberized ABS Trim Ring / Grille Provision / PVC Magnet Cover — Finished installation with optional grille. Sealed and Vented Compatible — Both enclosure types confirmed. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1S4-15 Series Punch P1 Subwoofer Size 15 inch Voice Coil Single Voice Coil (SVC) Impedance 4-Ohm ✓ Power Handling (RMS) 250W ✓ Peak Power Not specified Surround Technique VAST (up to 25% increased cone area) ✓ Sensitivity Not specified Frequency Response Not specified Xmax Not specified Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals 10-AWG Nickel-Plated Push Terminals ✓ Trim Ring Rubberized ABS (Grille Insert Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ Mounting Depth Not specified Cutout Diameter Not specified Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed — tight, accurate bass Vented — higher efficiency at tuning frequency Wiring: 4-Ohm SVC — single 4-Ohm load per unit Two units in parallel = 2-Ohm; two in series = 8-Ohm Pairs well with: Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers at 4-Ohm Frequently Asked Questions What is the difference between the P1S4-15 and P1S2-15? Both are identical 15" Punch P1 subwoofers with the same 250W RMS rating and construction. The only difference is impedance: the P1S4-15 is 4-Ohm SVC, the P1S2-15 is 2-Ohm SVC. The 4-Ohm is more universally compatible with most mono amplifiers; the 2-Ohm suits amplifiers that produce maximum rated output at 2-Ohm. What enclosure volume is required? Not confirmed in the supplier data. A 15" driver requires considerably more net internal volume than a 10" or 12" — pull the official Rockford Fosgate P1S4-15 datasheet for sealed and vented volume recommendations before building or selecting an enclosure. What amplifier power is appropriate? 250W RMS at 4-Ohm. Confirm the amplifier's RMS output at 4-Ohm before purchasing. Is a grille available? The rubberized ABS trim ring accommodates an optional grille insert. Confirm the compatible grille part number with Rockford Fosgate. Does a 15" subwoofer fit in a standard passenger car boot? A 15" subwoofer and its required enclosure occupy significantly more space than a 10" or 12" installation. It is better suited to vehicles with dedicated boot space, custom enclosure builds, utes, vans, or trucks. Confirm the enclosure dimensions and available installation space before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" 4-Ohm SVC Punch Subwoofer 250W RMS, Kevlar Fibre-Reinforced Paper Cone, VAST, Nomex® Voice Coil Collar, Extended Pole Piece, 10-AWG Nickel Push Terminals. Product Overview The Rockford Fosgate Punch P1S4-10 is a 10" 4-Ohm Single Voice Coil (SVC) subwoofer rated at 250W RMS the 4-Ohm variant of the Punch P1 10" platform. The same Punch P1 construction as the P1S2-10 applies: Kevlar fibre-reinforced paper cone with VAST surround geometry, high-temperature voice coil with spun-laced Nomex® reinforcement collar, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, 10-AWG nickel-plated push terminals, rubberized ABS trim ring with grille insert provision, and protective PVC textured magnet cover. Optimised for sealed and vented enclosures. Sold as an individual unit. The 4-Ohm impedance suits a wider range of mono amplifiers than the 2-Ohm P1S2-10 particularly amplifiers with a minimum stable impedance above 2-Ohm. Key Specifications Subwoofer size: 10 inch Voice coil configuration: Single Voice Coil (SVC) Impedance: 4-Ohm Power handling (RMS): 250W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: 10-AWG nickel-plated push terminals Trim ring: Rubberized ABS (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 4-Ohm SVC — Broad Amplifier Compatibility — A 4-Ohm SVC presents a stable, universally compatible load to most mono subwoofer amplifiers. Two P1S4-10 units in parallel = 2-Ohm; in series = 8-Ohm. 250W RMS Power Handling — Confirmed 250W RMS — the same sustained rating as the P1S2-10. Kevlar Fibre-Reinforced Paper Cone — Kevlar aramid fibres reinforce the paper cone for improved stiffness and breakup resistance — delivering accurate, impact-filled bass at high output levels. VAST — Vertical Attach Surround Technique — Up to 25% increased effective cone area for improved bass output and efficiency. High-Temp Voice Coil with Nomex® Reinforcement Collar — Spun-laced Nomex at the voice coil-to-cone junction provides heat resistance and structural reinforcement at the highest mechanical and thermal stress point. Extended Pole Piece and Bumped Vented Backplate — Extended pole piece for increased Xmax; vented backplate to eliminate air spring compression at high excursion. 10-AWG Nickel-Plated Push Terminals — Larger gauge than the 12-AWG terminals on Prime R-series subwoofers — lower contact resistance for a 250W installation. StampCast Basket with Integrated Spider Venting — Motor cooling via basket ventilation during sustained operation. Rubberized ABS Trim Ring with Grille Provision — Accommodates an optional grille insert for cone protection. Protective PVC Textured Magnet Cover — Protects the magnet assembly during installation and use. Optimised for Sealed and Vented Enclosures — Both enclosure types confirmed. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1S4-10 Series Punch P1 Subwoofer Size 10 inch Voice Coil Single Voice Coil (SVC) Impedance 4-Ohm ✓ Power Handling (RMS) 250W ✓ Peak Power Not specified Surround Technique VAST (up to 25% increased cone area) ✓ Sensitivity Not specified Frequency Response Not specified Xmax Not specified Voice Coil High-Temp, Nomex® Reinforcement Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals 10-AWG Nickel-Plated Push Terminals ✓ Trim Ring Rubberized ABS (Grille Insert Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ Mounting Depth Not specified Cutout Diameter Not specified Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed — tight, accurate bass Vented — higher efficiency output Wiring: 4-Ohm SVC — single 4-Ohm load per unit Two units in parallel = 2-Ohm; two units in series = 8-Ohm Pairs well with: Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers at 4-Ohm Frequently Asked Questions What is the difference between the P1S4-10 and the P1S2-10? Both are identical 10" Punch P1 subwoofers in the same construction. The only difference is impedance: the P1S4-10 is 4-Ohm SVC, the P1S2-10 is 2-Ohm SVC. Select based on your amplifier's stable impedance and preferred load. The 4-Ohm is more universally compatible with most amplifiers; the 2-Ohm suits amplifiers that produce their rated output at 2-Ohm. What enclosure volume is recommended? Not confirmed in the supplier data. Pull the official Rockford Fosgate P1S4-10 datasheet for sealed and vented volume recommendations. What amplifier power is appropriate? 250W RMS at 4-Ohm. Confirm the amplifier's RMS output at 4-Ohm before purchasing. Can a grille be added? Yes — the trim ring accepts an optional grille insert. Confirm the compatible grille part number with Rockford Fosgate. What does VAST do for this subwoofer? VAST (Vertical Attach Surround Technique) attaches the surround vertically at the cone edge — increasing the effective radiating cone area by up to 25% at the same basket diameter. This produces more bass output and efficiency than a conventional surround attachment on the same frame size. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" 2-Ohm SVC Punch Subwoofer 250W RMS, Kevlar Fibre-Reinforced Paper Cone, VAST, Nomex® Voice Coil Collar, Extended Pole Piece, 10-AWG Nickel Push Terminals. Product Overview The Rockford Fosgate Punch P1S2-10 is a 10" 2-Ohm Single Voice Coil (SVC) subwoofer rated at 250W RMS the first model in Rockford Fosgate's Punch P1 subwoofer range. The P1 series draws on Rockford Fosgate's history with the Punch subwoofer family while introducing construction materials and design elements above the Prime R-series tier. The Kevlar fibre-reinforced paper cone is a key differentiator Kevlar fibre adds tensile strength and stiffness to the paper pulp cone, resisting flex and breakup under high-output bass conditions. VAST (Vertical Attach Surround Technique) increases the effective cone area by up to 25%. The high-temperature voice coil uses a spun-laced Nomex® reinforcement collar at the junction between the voice coil and cone a specific thermal and mechanical reinforcement at the highest-stress point of the moving assembly. The extended pole piece and bumped vented backplate provide maximum linear excursion and thermal management. Custom 10-AWG nickel-plated push terminals handle the heavier wiring gauge appropriate for a 250W subwoofer. A protective PVC textured magnet cover and rubberized ABS trim ring with grille insert provision complete the package. Optimised for both sealed and vented enclosures. Sold as an individual unit. Key Specifications Subwoofer size: 10 inch Voice coil configuration: Single Voice Coil (SVC) Impedance: 2-Ohm Power handling (RMS): 250W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: 10-AWG nickel-plated push terminals Trim ring: Rubberized ABS (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Kevlar Fibre-Reinforced Paper Cone — Kevlar aramid fibres are added to the paper pulp cone matrix, significantly increasing the cone's tensile strength and stiffness. Kevlar reinforcement resists cone breakup modes — the deformation that causes distortion at high output levels — while maintaining the natural damping characteristics and low mass of paper. This is a meaningful cone material step above the mica-polypropylene cones used in the Prime R-series. VAST — Vertical Attach Surround Technique — Rockford Fosgate's proprietary surround geometry increases the effective radiating cone area by up to 25% at the same basket diameter — improving bass output and efficiency. High-Temp Voice Coil with Spun-Laced Nomex® Reinforcement Collar — The Nomex® collar is applied at the junction between the voice coil former and the cone — the highest mechanical stress point of the moving assembly. Spun-laced Nomex provides heat resistance and structural reinforcement at this junction, preventing the delamination and separation that can occur at high temperatures and excursion levels. This is a construction refinement above a standard voice coil design. Extended Pole Piece and Bumped Vented Backplate — The extended pole piece increases the depth of the magnetic gap that the voice coil travels within — extending the driver's linear excursion (Xmax) compared to a standard pole piece design. The bumped vented backplate allows greater spider-to-backplate clearance and vents air from behind the dust cap at high excursion — preventing the air spring compression that limits output. 10-AWG Nickel-Plated Push Terminals — 10 AWG is a heavier gauge than the 12 AWG terminals used in the Prime R-series — providing a lower-resistance connection point and accepting larger wiring appropriate for a high-current 250W subwoofer installation. Nickel plating resists corrosion. 250W RMS Power Handling — Confirmed 250W RMS — the same power rating as the standard-depth Prime R2D series. StampCast Basket with Integrated Spider Venting — Rockford Fosgate's StampCast basket construction with venting for motor cooling during sustained operation. Rubberized ABS Trim Ring with Grille Insert Provision — The rubberized ABS trim ring accommodates an optional grille insert — providing a clean, professional finish with the option to add a grille for cone protection. Protective PVC Textured Magnet Cover — Protects the magnet assembly from physical damage during installation and use. Optimised for Sealed and Vented Enclosures — Both enclosure types confirmed — flexibility for sealed or ported builds. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1S2-10 Series Punch P1 Subwoofer Size 10 inch Voice Coil Single Voice Coil (SVC) Impedance 2-Ohm ✓ Power Handling (RMS) 250W ✓ Peak Power Not specified Surround Technique VAST (up to 25% increased cone area) ✓ Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Xmax Not specified — confirm with Rockford Fosgate Voice Coil High-Temp, Nomex® Reinforcement Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals 10-AWG Nickel-Plated Push Terminals ✓ Trim Ring Rubberized ABS (Grille Insert Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ Mounting Depth Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified — confirm with Rockford Fosgate Sold As Individual Unit Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed — tight, accurate bass Vented — higher efficiency output at the tuning frequency Wiring: 2-Ohm SVC — a single 2-Ohm load. For a 2-Ohm compatible mono amplifier, one subwoofer presents 2-Ohm. Two P1S2-10 units wired in parallel = 1-Ohm; in series = 4-Ohm. Pairs well with: Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers at 2-Ohm A sealed or vented 10" enclosure to Rockford Fosgate's recommended volume specifications Frequently Asked Questions What is a Kevlar fibre-reinforced paper cone and why is it used? Kevlar is an aramid fibre material with very high tensile strength and stiffness relative to its weight. When added to the paper cone matrix, Kevlar fibres reinforce the paper structure — resisting the cone breakup modes that cause distortion at high output levels — while maintaining the natural damping and low mass of paper. This produces more accurate bass reproduction at high volumes compared to unreinforced paper cones. What is the Nomex® reinforcement collar on the voice coil? The spun-laced Nomex collar is applied at the junction between the voice coil former and the cone — the point where mechanical and thermal stress is highest during high-excursion operation. Nomex (aromatic polyamide) is heat resistant and structurally strong — the collar prevents delamination and separation at this junction under the thermal and mechanical demands of 250W sustained operation. What does the extended pole piece do? An extended pole piece increases the depth of the magnetic gap that the voice coil travels within — allowing the voice coil to remain in the linear portion of the magnetic field across a greater excursion range. This directly increases the driver's Xmax (maximum linear excursion) and the maximum bass output before distortion begins. What enclosure volume is recommended? Recommended enclosure volumes for sealed and vented configurations are not confirmed in the supplier data. Pull the official Rockford Fosgate P1S2-10 datasheet for net internal volume recommendations. Can a grille be added to the P1S2-10? Yes — the rubberized ABS trim ring is designed to accept an optional grille insert for cone protection. Confirm compatible grille part number with Rockford Fosgate. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6" 2-Way Punch Component System 60W RMS, FlexFit Basket, PEI Dome Tweeter with ICC, Grilles Included. Product Overview The Rockford Fosgate Punch P16-S is a 6" 2-way component speaker system rated at 60W RMS the 6" step up from the P152-S (5.25"), sharing the same Punch component platform: FlexFit basket, PEI dome tweeter with Integrated Concealed Crossover (ICC), injection-moulded mineral-filled polypropylene cone, and butyl rubber surround. The kit includes two woofers with grilles, two tweeters, integrated crossovers, and mounting hardware. The 6" woofer provides a larger cone area than the 5.25" P152-S delivering improved low-frequency extension and output while maintaining the same dedicated component configuration for independent tweeter placement. Technical specifications sensitivity, frequency response, mounting depths, and crossover details are not confirmed in the supplier data for the P16-S. Pull the official Rockford Fosgate P16-S datasheet before publishing, using the P152-S spec set as a reference for the data fields needed. Key Specifications Woofer size: 6 inch Configuration: 2-way component system Power handling (RMS): 60W per woofer (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Woofer mounting depth: Not specified — confirm with Rockford Fosgate Tweeter size: Implied 1" (25mm) from description — confirm with Rockford Fosgate Tweeter mounting depth: Not specified — confirm with Rockford Fosgate Tweeter dome material: PEI (features) Crossover type: ICC (Integrated Concealed Crossover) Crossover point: Not specified — confirm with Rockford Fosgate Recessed tweeter mount: 1-3/4" hole saw Cone: Injection-moulded mineral-filled polypropylene Surround: Butyl rubber Basket: FlexFit OEM adapter plate: Not mentioned in features — confirm with Rockford Fosgate Grilles: Included (confirmed — "two woofers with grilles") Mounting hardware: Included Kit contents: 2 woofers + 2 tweeters + crossovers + grilles + hardware CEA-2031 compliant: Not stated — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Shipping weight: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 6" Woofer — More Bass Extension Than 5.25" — The larger 6" cone moves more air than the P152-S's 5.25" woofer, typically delivering improved low-frequency output and extension in the same door position. 60W RMS — 10W More Than P152-S — At 60W RMS, the P16-S handles 10W more than the P152-S (50W) — consistent with the larger 6" driver's capacity for sustained power input. PEI Dome Tweeter with ICC — Consistent with the P152-S — PEI dome, Integrated Concealed Crossover within the tweeter assembly, recessed mount via standard 1-3/4" hole saw. See Red-flag #1 on the "soft dome" vs PEI material conflict. FlexFit Basket — Non-standard basket geometry for OEM cavity compatibility across a range of factory door speaker positions. Mineral-Filled Polypropylene Cone, Butyl Rubber Surround — Same construction as P152-S and P16 — stiffened cone, durable butyl surround for Australian conditions. Grilles and Hardware Included — Two woofer grilles and all mounting hardware in the kit. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P16-S Series Punch Woofer Size 6 inch Configuration 2-Way Component Power Handling (RMS) 60W per woofer ✓ Peak Power Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Woofer Mounting Depth Not specified — confirm with Rockford Fosgate Tweeter Size Implied 1" — confirm with Rockford Fosgate Tweeter Mounting Depth Not specified — confirm with Rockford Fosgate Tweeter Dome Material PEI Crossover ICC (Integrated Concealed) Crossover Point Not specified — confirm with Rockford Fosgate Recessed Tweeter Mount 1-3/4" hole saw ✓ Cone Injection-Moulded Mineral-Filled Polypropylene Surround Butyl Rubber Basket FlexFit OEM Adapter Plate Not mentioned — confirm with Rockford Fosgate Grilles Included ✓ Mounting Hardware Included ✓ Kit Contents 2 woofers + 2 tweeters + crossovers + grilles + hardware CEA-2031 Compliant Not confirmed Impedance Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified — confirm with Rockford Fosgate Shipping Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation: 6" front door speaker positions OEM factory locations with FlexFit basket compatibility Punch component system comparison: Feature P152-S (5.25") P16-S (6") RMS 50W ✓ 60W ✓ Sensitivity 87dB ✓ TBC Freq. Response 70Hz–22kHz ✓ TBC Tweeter Size 1.0" (25.4mm) ✓ Implied 1" Surround Butyl Rubber Butyl Rubber OEM Adapter Plate Yes ✓ Not confirmed CEA-2031 Yes ✓ TBC Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer for bass below the 6" woofer's confirmed lower frequency limit (TBC) Frequently Asked Questions How does the P16-S differ from the P152-S? Both are Punch series 2-way component systems with identical platform construction. The P16-S uses a 6" woofer versus the P152-S's 5.25", and is rated at 60W RMS versus 50W. The 6" cone provides improved low-frequency extension and output. Select based on which woofer size fits your vehicle's front door speaker positions. What tweeter dome material is used in the P16-S? The supplier description states "1" soft dome tweeters" while the features list confirms "PEI dome tweeter." PEI is a rigid thermoplastic — not a soft dome material. This conflict exists in the supplier data for both the P16-S and P152-S. Confirm the correct material with Rockford Fosgate before purchasing if tweeter character is a specific consideration. Is the OEM adapter plate included in the P16-S kit? The P152-S explicitly includes an OEM adapter plate. The P16-S features list does not mention one — this may be an omission or a genuine difference between the two models. Confirm with Rockford Fosgate before purchasing. What crossover does the P16-S use? An ICC (Integrated Concealed Crossover) — the crossover is built into the tweeter assembly, eliminating the need for a separate crossover box. Crossover point and slope are not confirmed for the P16-S — pull from the official Rockford Fosgate P16-S datasheet. The P152-S crossover (3.5kHz @ 12dB/octave Butterworth) may be similar but should not be assumed. Are grilles included with the P16-S? Yes — the product description confirms the kit includes two woofers with grilles alongside the tweeters and hardware. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6"×9" 2-Way Punch Series Coaxial 65W RMS, FlexFit Basket, PEI Dome Tweeter with ICC, Grilles Included. Product Overview The Rockford Fosgate Punch P1692 is a pair of 6"×9" 2-way coaxial speakers rated at 65W RMS the 2-way option in the 6"×9" Punch series lineup. The kit confirms grilles and mounting hardware alongside the OEM adapter plate. The 6"×9" format is one of the most common rear deck and parcel shelf speaker positions across Australian passenger vehicles. The P1692 shares the Punch series platform: FlexFit basket for OEM cavity compatibility, PEI dome tweeter with Integrated Concealed Crossover (ICC), injection-moulded mineral-filled polypropylene cone, and butyl rubber surround. Technical specifications impedance, sensitivity, frequency response, and mounting depth are not provided in the supplier data and must be pulled from the official Rockford Fosgate P1692 datasheet before publishing. Key Specifications Speaker size: 6"×9" (oval) Configuration: 2-way coaxial Power handling (RMS): 65W per speaker (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Tweeter: PEI dome (size not specified) Crossover: Integrated Concealed Crossover (ICC) — built into tweeter Cone: Injection-moulded mineral-filled polypropylene Surround: Butyl rubber Basket: FlexFit OEM adapter plate: Included Mounting hardware: Included Grilles: Included ✓ Sold as: Pair (2 speakers confirmed) CEA-2031 compliant: Not stated — confirm with Rockford Fosgate Cutout dimensions: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 65W RMS — Equal to the P1683 — At 65W RMS, the P1692 is tied with the 6"×8" P1683 for the highest confirmed power rating in the Punch coaxial oval range, and the largest oval cone in this catalogue. 6"×9" Oval — Largest Oval in the Punch Series — The 6"×9" oval is the largest speaker format in the Punch series oval range — providing the greatest cone area and the best low-frequency output potential of the oval models. Commonly installed in rear decks and parcel shelves across Australian passenger vehicles. Grilles Included — Unlike the P1572 (no grilles) and the ambiguous P1462 and P1683, the P1692 confirms grille inclusion — a complete, finished installation kit. FlexFit Basket with OEM Adapter Plate — Non-standard basket geometry for OEM cavity compatibility with included adapter plate for extended fitment. PEI Dome Tweeter with ICC — Polyetherimide dome tweeter with Integrated Concealed Crossover built into the tweeter assembly — no external crossover component. Injection-Moulded Mineral-Filled Polypropylene Cone — Stiffened cone compound for reduced resonance colouration and accurate midrange reproduction. Butyl Rubber Surround — UV and heat-resistant synthetic rubber for long-term durability in Australian conditions. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1692 Series Punch Speaker Size 6"×9" (oval) Configuration 2-Way Coaxial Power Handling (RMS) 65W per speaker ✓ Peak Power Not specified — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Mounting Depth Not specified — confirm with Rockford Fosgate Tweeter PEI Dome (size not specified) Crossover ICC (Integrated Concealed, in tweeter) ✓ Cone Injection-Moulded Mineral-Filled Polypropylene Surround Butyl Rubber Basket FlexFit OEM Adapter Plate Included ✓ Mounting Hardware Included ✓ Grilles Included ✓ Sold As Pair (2 speakers) ✓ CEA-2031 Compliant Not confirmed Cutout Dimensions Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Factory 6"×9" oval rear deck, parcel shelf, and door panel speaker positions Additional positions with included OEM adapter plate P1692 vs P1693 — 2-way vs 3-way in the 6"×9" format: Feature P1692 P1693 Size 6"×9" 6"×9" Configuration 2-Way 3-Way RMS 65W ✓ TBC Grilles ✓ TBC Punch vs Prime — 6"×9" comparison: P1692 (Punch, 2-way): 65W RMS, FlexFit basket, PEI dome, mineral-filled cone, butyl rubber surround — higher tier R169X2 (Prime, 2-way): 65W RMS, standard polypropylene, silk dome tweeter, rubber surround — value tier R169X3 (Prime, 3-way): 65W RMS, Piezo tweeter, standard polypropylene — value tier, three drivers Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer for bass below the P1692's confirmed lower frequency limit (TBC) Frequently Asked Questions Are grilles included with the P1692? Yes — the supplier description confirms the kit includes two speakers with grilles and mounting hardware. What vehicles commonly use a 6"×9" rear deck speaker? The 6"×9" oval is one of the most common rear deck speaker formats across Australian passenger vehicles including sedans, hatchbacks, wagons, and SUVs. Always confirm your vehicle's exact speaker format with the owner's manual or a vehicle-specific fit guide before purchasing. How does the Punch P1692 differ from the Prime R169X2? Both are 6"×9" 2-way oval speakers rated at 65W RMS. The P1692 is Punch series — FlexFit basket, PEI dome tweeter, mineral-filled polypropylene cone, butyl rubber surround. The R169X2 is Prime series — standard polypropylene cone, silk dome tweeter, rubber surround. The Punch series delivers improved construction quality and material specifications at a higher price point. What technical specifications are confirmed for the P1692? 65W RMS power handling, grilles included, OEM adapter plate, and sold as a pair are confirmed. Impedance, sensitivity, frequency response, and mounting depth are not in the supplier data — pull the Rockford Fosgate P1692 datasheet before publishing. Should I choose the P1692 (2-way) or a 3-way 6"×9" for this position? If Rockford Fosgate offers a 3-way 6"×9" Punch model (P1693), the choice is similar to the round speaker comparison: the 2-way P1692 uses a silk-dome tweeter and two driver elements; a 3-way adds a dedicated midrange for independent coverage of the vocal frequency range. If audio quality in the midrange is a priority, the 3-way is the appropriate choice. If simplicity and a warmer high-frequency character are preferred, the 2-way P1692 suits. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less