5"×7" Oval 2-Way Coaxial 60W RMS, 89dB, 75Hz–22kHz, CEA-2031. Fits 5"×7" and 6"×8" Positions. No Grilles. Product Overview The Rockford Fosgate Punch P1572 is a pair of 5"×7" oval 2-way coaxial speakers rated at 60W RMS (120W peak) one of the most spec-complete Punch series oval models, with confirmed 4Ω impedance, 89dB sensitivity, 75Hz to 22kHz frequency response, 56mm (2.20") mounting depth, CEA-2031 compliant power rating, and shipping weight. At 89dB, the P1572 is the highest-confirmed-sensitivity speaker in the Punch series coaxial range. The included 6"×8" adapter plate extends the P1572's fitment to 6"×8" oval positions as well as standard 5"×7" locations a dual-format kit from a single purchase. Grilles are explicitly not included. FlexFit basket, PEI dome tweeter with ICC, mineral-filled polypropylene cone, and butyl rubber surround are consistent with the Punch series platform. Key Specifications Speaker size: 5"×7" (oval) Configuration: 2-way coaxial Power handling (RMS): 60W per speaker (CEA-2031 compliant) Power handling (peak): 120W per speaker Impedance: 4Ω Sensitivity: 89dB @ 1W/1M Frequency response: 75Hz – 22kHz Mounting depth: 2.20" (56mm) Tweeter: PEI dome (size not specified — confirm with Rockford Fosgate) Crossover: Built-in tweeter crossover (ICC) Cone: Injection-moulded mineral-filled polypropylene Surround: Butyl rubber Basket: FlexFit OEM adapter plate: 6"×8" (included) Mounting hardware: Included Grilles: Not included ✓ Sold as: Pair (2 speakers confirmed) CEA-2031 compliant: Yes Shipping weight: 5.6 lbs (2.54 kg) per pair Cutout dimensions: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Dual-Format Fitment — 5"×7" and 6"×8" — The included 6"×8" adapter plate allows the P1572 to be installed in 6"×8" oval positions as well as standard 5"×7" locations — covering two of the most common oval speaker formats in Australian Ford, Mazda, and other vehicles from a single kit. 89dB Sensitivity — Highest in the Punch Coaxial Range — At 89dB, the P1572 is the most efficient confirmed speaker across the Punch series coaxials in this catalogue — 1dB above the P16 (88dB) and 4dB above the P132 (85dB). Higher sensitivity translates directly to more output per watt — producing noticeably more volume from the same head unit or amplifier power. 60W RMS CEA-2031 — Equal to the P1675 (6.75" 3-way round) and confirmed CEA-2031 compliant — a sustained industry-standard measurement, not a peak figure. 120W peak provides headroom for dynamic transients. 75Hz – 22kHz Frequency Response — Extends to 75Hz — providing usable upper bass from the oval driver and reducing the listener's dependence on a subwoofer at moderate listening levels. 56mm Mounting Depth — The P1572's 56mm (2.20") mounting depth is the deepest confirmed in the Punch series oval range. Confirm cavity clearance before purchasing — particularly in vehicles where door panel construction limits depth behind the mounting surface. FlexFit Basket with 6"×8" Adapter Plate — Non-standard basket geometry for OEM cavity compatibility, with the 6"×8" adapter plate included as the primary additional fitment option. PEI Dome Tweeter with ICC — Polyetherimide dome tweeter with Integrated Concealed Crossover built into the tweeter assembly — no external crossover component, no black box. Butyl Rubber Surround — UV and heat-resistant synthetic rubber for long-term reliability — superior to foam surrounds in Australian vehicle environments. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1572 Series Punch Speaker Size 5"×7" (oval) Configuration 2-Way Coaxial Power Handling (RMS) 60W per speaker ✓ (CEA-2031) Power Handling (Peak) 120W per speaker ✓ Impedance 4Ω ✓ Sensitivity 89dB @ 1W/1M ✓ Frequency Response 75Hz – 22kHz ✓ Mounting Depth 2.20" (56mm) ✓ Tweeter PEI Dome (size not specified) Crossover Built-in (ICC, in tweeter) ✓ Cone Injection-Moulded Mineral-Filled Polypropylene Surround Butyl Rubber Basket FlexFit CEA-2031 Compliant Yes ✓ OEM Adapter Plate 6"×8" (included) ✓ Mounting Hardware Included ✓ Grilles Not Included ✓ Sold As Pair (2 speakers) ✓ Shipping Weight 5.6 lbs / 2.54 kg per pair ✓ Cutout Dimensions Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Standard 5"×7" oval factory speaker positions 6"×8" oval positions (adapter plate included) Punch series oval format comparison: Model Size Config RMS Sensitivity Freq. Response Depth Grilles P1462 4"×6" 2-Way 35W ✓ TBC TBC TBC TBC P1572 5"×7" 2-Way 60W ✓ 89dB ✓ 75Hz–22kHz ✓ 56mm ✓ No ✓ Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer system for bass below 75Hz Weight 2.54 kg per pair (shipping weight).  Frequently Asked Questions What positions can the P1572 be installed in? The P1572 fits standard 5"×7" oval speaker positions. The included 6"×8" adapter plate also allows installation in 6"×8" oval positions — covering two of the most common oval formats in Ford, Mazda, and other vehicles from a single kit. Are grilles included with the P1572? No — grilles are explicitly not included. The kit contains two speakers, one 6"×8" adapter plate pair, and mounting hardware only. Why is the P1572 the most efficient Punch series speaker? At 89dB sensitivity, the P1572 produces more sound pressure per watt than any other confirmed Punch series speaker. The larger oval cone area of the 5"×7" format, combined with Rockford Fosgate's tuning, achieves higher sensitivity than the smaller round Punch drivers. In practical terms, the P1572 will sound noticeably louder than a P132 (85dB) from the same power source. Is the 56mm mounting depth a concern? At 56mm (2.20"), the P1572 is the deepest confirmed Punch speaker in this catalogue. Many OEM door panels have limited depth clearance behind the speaker mounting surface. Confirm the available cavity depth in your vehicle before purchasing — insufficient depth can result in speaker contact with the inner door structure. How does the P1572 compare to the P1462 (4"×6")? The P1572 is larger (5"×7" vs 4"×6"), more powerful (60W vs 35W RMS), and has more confirmed specifications — 89dB sensitivity, 75Hz–22kHz response, and 56mm mounting depth. The P1462 fits vehicles with 4"×6" oval positions; the P1572 fits 5"×7" and 6"×8" positions. Select based on your vehicle's speaker format. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

65W RMS 6"×9" 3-Way Speaker Three Drivers for Independent Bass, Midrange, and High-Frequency Coverage. Grilles Included. Product Overview The Rockford Fosgate Prime R169X3 is a 6"×9" 3-way full-range speaker rated at 65W RMS the 3-way counterpart to the R169X2 in the same oval format and at the same power rating. Where the R169X2 uses a 2-way design with a silk dome tweeter, the R169X3 adds a separate midrange driver and uses a pole-mounted Piezo tweeter covering bass, midrange, and high-frequency reproduction across three independent driver elements from a single coaxial oval assembly. The kit confirms grille and mounting hardware inclusion. At 65W RMS, the R169X3 shares the top power rating in the Prime speaker range alongside the R169X2. Pack contents are implied as a pair by the "X3" indicating three-way configuration and the "kit" language confirm single vs pair with Rockford Fosgate before purchasing. Key Specifications Speaker size: 6"×9" (oval) Configuration: 3-way full-range (woofer + midrange + Piezo tweeter) Power handling (RMS): 65W per speaker (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Cone material: Vacuum polypropylene Surround: Rubber Basket: Stamped steel Tweeter: Pole-mounted Piezo Mid element: Pole-mounted midrange Crossover: Integrated tweeter crossover (included in kit) Grilles: Included ✓ Mounting hardware: Included ✓ Pack contents: Single or pair — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Cutout dimensions: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 3-Way Configuration — Three Drivers, Three Frequency Bands — Three separate driver elements handle the bass (woofer), midrange (dedicated midrange driver), and high frequencies (Piezo tweeter) independently. The dedicated midrange covers the critical vocal and instrumental frequency range without the woofer or tweeter being asked to compromise their performance outside their optimal range. 65W RMS — Top-Rated in the Prime Range — Equal to the 2-way R169X2 and the highest RMS figure in the Prime speaker catalogue. The 6"×9" oval's larger cone area handles this sustained power effectively. Pole-Mounted Piezo Tweeter — The Piezo tweeter is inherently capacitive, acting as a natural high-pass filter without requiring a complex capacitor-based crossover. Piezo tweeters produce a forward, bright high-frequency character — differing from the softer presentation of the silk dome tweeters used in the R169X2 and other 2-way Prime models. Buyers who prefer a warmer, more relaxed high-frequency character should compare the R169X2 (silk dome) before selecting. Dedicated Midrange Driver — A separate midrange element handles the 500Hz to 5kHz range independently — the most perceptually important frequency region for voice, guitar, piano, and the majority of melodic instrument content. This is the key sonic advantage of the 3-way R169X3 over the 2-way R169X2. Vacuum Polypropylene Cone, Rubber Surround — Proven construction for long-term reliability in Australian vehicle environments. Grilles and Mounting Hardware Included — Complete installation kit for factory replacement in standard 6"×9" oval speaker positions. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R169X3 Series Prime Speaker Size 6"×9" (oval) Configuration 3-Way Full-Range Power Handling (RMS) 65W per speaker ✓ Peak Power Not specified Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Tweeter Pole-Mounted Piezo Midrange Pole-Mounted Crossover Integrated (tweeter, included) Cone Material Vacuum Polypropylene Surround Rubber Basket Stamped Steel Grilles Included ✓ Mounting Hardware Included ✓ Sold As Single or pair — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Mounting Depth Not specified — confirm with Rockford Fosgate Cutout Dimensions Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Factory 6"×9" oval door, rear deck, and parcel shelf speaker locations Same 6"×9" oval cutout as the R169X2 — the two models are size-for-size interchangeable within the same vehicle position R169X2 vs R169X3 — same position, different configuration: Feature R169X2 R169X3 Size 6"×9" 6"×9" Configuration 2-Way 3-Way RMS 65W ✓ 65W ✓ Tweeter Silk Dome Piezo Midrange No Yes Grilles ✓ ✓ Complete Rockford Fosgate Prime speaker range: Model Size Config RMS Tweeter R14X2 4" round 2-Way 30W ✓ Silk Dome R1525X2 5.25" round 2-Way TBC Silk Dome R165X3 6.5" round 3-Way 45W ✓ Piezo R1675X2 6.75" round 2-Way 45W ✓ Silk Dome R168X2 6"×8" oval 2-Way 55W ✓ Silk Dome R169X2 6"×9" oval 2-Way 65W ✓ Silk Dome R169X3 6"×9" oval 3-Way 65W ✓ Piezo Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers 6"×9" oval speaker adaptors or baffles if required for cavity clearance Frequently Asked Questions What is the difference between the R169X2 and the R169X3? Both are 6"×9" oval speakers rated at 65W RMS. The R169X2 is a 2-way design with a silk dome tweeter — warmer, smoother high-frequency character. The R169X3 is a 3-way design with a separate midrange driver and a Piezo tweeter — more forward highs and independent midrange handling. Select based on your preference for tweeter character and whether the dedicated midrange is a priority for your listening style. What does the dedicated midrange driver add over a 2-way design? The midrange driver handles the 500Hz to 5kHz frequency region independently — covering vocals, guitar, piano, and the majority of melodic instrument content. In a 2-way design, this range is shared between the woofer (which may have difficulty maintaining clarity here) and the tweeter crossover point. A dedicated midrange element can improve clarity and presence in this critical frequency band. Is the R169X3 suitable for a factory head unit installation? The 65W RMS rating is compatible with aftermarket head unit output. Sensitivity is not confirmed in the supplier data — pull the Rockford Fosgate R169X3 datasheet to assess performance from head unit power levels before purchasing for a non-amplified installation. Is the R169X3 sold as a pair or single speaker? Pair status is not explicitly confirmed in the supplier description. The "kit" language and the consistent "X" suffix pattern across the Prime range suggest a pair, but this should be confirmed with Rockford Fosgate before purchasing. How does the Piezo tweeter in the R169X3 differ from the silk dome in the R169X2? The Piezo tweeter produces a forward, bright high-frequency character that some listeners find detailed and engaging, while others may find fatiguing at high volumes. The silk dome tweeter in the R169X2 produces a softer, warmer high-frequency character that is generally considered more forgiving for extended listening. Buyers with a preference for natural, relaxed highs should consider the R169X2 over the R169X3. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Speaker Line to Male RCA Adapter OFC, Platinum Plated Ends, Split Center Pin. Connects Factory OEM Source Units to Amplifiers Without RCA Outputs. Product Overview The Rockford Fosgate RFI2SW is a high-level speaker wire to male RCA plug adapter the male-output counterpart to the RFIF2SW female adapter. Where the RFIF2SW outputs female RCA jacks (requiring a separate RCA cable to the amplifier), the RFI2SW outputs male RCA plugs that connect directly into the amplifier's female RCA inputs without an intermediate cable. OFC conductors, platinum-plated ends, and a split center pin for secure plug engagement. Key Specifications Part number: RFI2SW Type: High-level (speaker line) to low-level (RCA) adapter Input: Speaker-level signal from factory head unit speaker outputs Output: Male RCA plugs ✓ Conductor: OFC (Oxygen-Free Copper) ✓ End plating: Platinum ✓ Center pin: Split for secure connection ✓ Channels: Not confirmed — confirm from official product page Input impedance: Not confirmed — confirm with Rockford Fosgate Wire length: Not confirmed — confirm with Rockford Fosgate Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits Male RCA Plug Output — Direct Amplifier Connection The male RCA plugs on the RFI2SW plug directly into the amplifier's female RCA input jacks — eliminating the need for a separate RCA signal cable between the adapter and the amplifier. This is the key distinction from the RFIF2SW (female output), which requires an RCA cable between adapter and amplifier. OFC Conductors + Platinum Plated Ends OFC resists oxidation at both the speaker wire connection and RCA plug ends for long-term low-resistance signal transfer. Split Center Pin The same split center pin design used throughout the Rockford Fosgate RFI and RFIT RCA cable range — six-point spring contact for a secure, vibration-resistant connection at the amplifier's RCA input. Factory Head Unit to Amplifier — Economic Solution Connects a factory OEM source unit (without RCA outputs) to an amplifier using the existing speaker wire outputs. Technical Specs Specification Detail Brand Rockford Fosgate Part Number RFI2SW Type High-Level Speaker to RCA Adapter Input Signal Speaker-level (high level) ✓ Output Male RCA plugs ✓ Conductor OFC ✓ End Plating Platinum ✓ Center Pin Split ✓ Channels Not confirmed Input Impedance Not confirmed Wire Length Not confirmed Warranty Not confirmed Compatible With / Goes Well With Suitable for: Factory (OEM) head units without RCA preout jacks Direct connection to amplifiers with female RCA inputs (no separate RCA cable required) Compatibility caution: Same source unit damage risk as RFIF2SW. Always consult the installation instructions before connecting. Pairs with: Any amplifier with female RCA inputs — plugs directly in Rockford Fosgate TM750X1bd, TM1000X5ad, or other amplifiers with RCA inputs Frequently Asked Questions What is the difference between the RFI2SW and the RFIF2SW? Both are high-level speaker to RCA signal adapters with identical OFC and platinum construction. The RFI2SW has male RCA plugs — it connects directly into the amplifier's female RCA input jacks without requiring a separate RCA cable. The RFIF2SW has female RCA jacks — it requires a separate RCA cable between the adapter and the amplifier. Can the RFI2SW damage my factory head unit? The product description explicitly warns that improper installation can damage the source unit — consult the installation instructions before connecting to any factory head unit. Some OEM head units are sensitive to the impedance loading of external adapters on their speaker outputs. Does the RFI2SW replace a line output converter (LOC)? A basic adapter like the RFI2SW passively converts the high-level signal. For sensitive factory head units, a dedicated line output converter with level-matching circuitry may provide better protection and a more balanced signal. Confirm the appropriate solution for your vehicle's head unit with your installer before purchasing. How many channels does the RFI2SW provide? Channel count is not confirmed in the supplier data. Confirm from the official Rockford Fosgate RFI2SW product page. The "2SW" designation suggests a 2-channel (stereo) output. Which adapter should I choose — RFI2SW or RFIF2SW? Choose based on your installation layout. The RFI2SW (male output) plugs directly into the amplifier — best when the adapter can reach the amplifier's RCA inputs without slack. The RFIF2SW (female output) requires an RCA cable between adapter and amplifier — best when distance or routing requires a separate cable run. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R165-S Prime 6.5" 2-Way Component System Authentic Rockford Sound, OEM Direct Fit Product Overview The Rockford Fosgate R165-S is a 6.5" 2-way component speaker system from the Prime series, rated at 40 Watts RMS and designed as a new-generation factory replacement speaker delivering authentic Rockford Fosgate sound in a direct OEM installation format. The kit includes two 6.5" woofers with grilles, two 1/2" (13 mm) Mylar balanced dome tweeters, two in-line crossovers, and all mounting hardware everything needed for a complete component speaker installation without additional accessory purchases. The R165-S uses a mica-injected polypropylene cone for extended frequency response and improved cone rigidity over standard polypropylene a meaningful step up from typical factory replacement speakers at this price point. The Mylar balanced dome tweeter reproduces crystal clear high-frequency content with consistent dispersion, and the in-line crossover design simplifies installation by eliminating the need for a separate external crossover enclosure. The tweeter accommodates flush, surface, and angle mounting options for maximum installation flexibility across Australian vehicle applications. Key Specifications Speaker type: 2-way component system Woofer size: 6.5" Tweeter: 1/2" (13 mm) Mylar balanced dome Power handling: 40W RMS Cone material: Mica-injected polypropylene Surround: Foam Basket: Stamped steel Crossover: In-line (included) Tweeter mounting: Flush / surface / angle (hardware included) Kit contents: 2 x woofers with grilles, 2 x tweeters, 2 x in-line crossovers, mounting hardware Impedance: Confirm with supplier Sensitivity: Confirm with supplier Frequency response: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Mica-injected polypropylene cone: Mica injection adds mineral particle reinforcement to the polypropylene cone matrix, increasing stiffness and reducing cone flex compared to standard polypropylene cones of equivalent mass. The result is extended frequency response and improved pistonic accuracy delivering clearer, more detailed midrange and upper-bass reproduction than typical factory replacement speakers at the Prime series price point. 1/2" (13 mm) Mylar balanced dome tweeter: Mylar (biaxially-oriented polyethylene terephthalate) dome tweeters deliver clear, extended high-frequency response with consistent dispersion across the listening area. The balanced dome design minimises resonance peaks in the tweeter's operating range, contributing to the smooth, natural treble response the R165-S is designed to provide over factory speakers. In-line crossover simplified installation: The crossover is integrated in-line with the tweeter wiring rather than requiring a separate external crossover enclosure. This significantly simplifies installation in OEM replacement scenarios where additional mounting space for a crossover box is typically unavailable a practical advantage for Australian DIY installers working in standard door and A-pillar locations. Flush, surface, and angle tweeter mounting: Three tweeter mounting options provide installation flexibility across different vehicle dash, A-pillar, and door locations without requiring custom fabrication or additional brackets. Mounting hardware for all three options is included in the kit. OEM direct installation compatibility: The R165-S is designed to accommodate direct factory replacement in standard 6.5" OEM speaker locations, reducing the need for adaptor plates and simplifying installation in the broad range of Australian vehicles using 6.5" factory speaker positions. Complete kit everything included: Two woofers with grilles, two Mylar dome tweeters, two in-line crossovers, and all mounting hardware are included. No additional accessory purchases required for a complete component speaker installation. Stamped steel basket: Provides a rigid, cost-effective mounting structure appropriate for the Prime series price point, maintaining voice coil alignment and mechanical integrity at the 40W RMS operating level. Foam surround: Foam surrounds provide consistent compliance and reasonable environmental resistance for standard automotive interior use. Note that foam surrounds are not rated for marine or outdoor exposure the R165-S is an automotive interior speaker system. 40W RMS power handling: Accessible power requirements compatible with factory head units and entry-level aftermarket amplifiers. The 40W RMS rating is appropriate for the Prime series positioning as an authentic Rockford Fosgate sound upgrade over factory speakers without requiring a high-output amplifier. Prime series value positioning: The R165-S delivers genuine Rockford Fosgate engineering mica-injected cone, Mylar dome tweeter, in-line crossover system at the accessible Prime series price point. A clear step up in performance and build quality from generic factory replacement speakers at comparable price levels in the Australian market. Technical Specs Specification Detail SKU R165-S Brand Rockford Fosgate Speaker Type 2-way component system Woofer Size 6.5" Tweeter 1/2" (13 mm) Mylar balanced dome Power Handling 40W RMS Cone Material Mica-injected polypropylene Surround Foam Basket Stamped steel Crossover In-line (included) Tweeter Mounting Flush / surface / angle Kit Contents 2 x woofers + grilles, 2 x tweeters, 2 x crossovers, mounting hardware Impedance Confirm with supplier Sensitivity Confirm with supplier Frequency Response Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Standard 6.5" OEM speaker locations across a wide range of Australian vehicles confirm cutout diameter and mounting depth with supplier for specific vehicle fitment Factory head units rated at or near 40W RMS per channel Entry-level and mid-range aftermarket head units Rockford Fosgate Prime series amplifiers for powered upgrades beyond factory head unit output Vehicles requiring an authentic Rockford Fosgate component speaker system at an accessible Prime series price point Frequently Asked Questions What is included in the R165-S kit? The R165-S kit includes two 6.5" woofers with grilles, two 1/2" Mylar balanced dome tweeters, two in-line crossovers, and all mounting hardware everything needed for a complete 2-way component speaker installation without additional purchases. What is the advantage of a mica-injected polypropylene cone over a standard polypropylene cone? Mica injection adds mineral reinforcement to the polypropylene cone matrix, increasing stiffness and reducing cone flex compared to plain polypropylene of equivalent mass. This improves pistonic accuracy and extends the cone's useful frequency response range, delivering clearer midrange and upper-bass reproduction a meaningful performance advantage over standard factory replacement cones at the Prime series price point. How does the in-line crossover simplify installation? The crossover is wired in-line with the tweeter connection rather than requiring a separate external crossover box mounted in the vehicle. In OEM replacement installations where door cavities and A-pillars have limited spare space, the in-line design eliminates the need to find a mounting location for a crossover enclosure making the R165-S significantly easier to install than component systems with separate external crossovers. What tweeter mounting options does the R165-S support? The R165-S tweeter accommodates flush mounting (recessed into a surface), surface mounting (on top of a surface), and angle mounting for angled dash or pillar installations. Hardware for all three options is included in the kit, providing flexibility across the range of Australian vehicle dash, A-pillar, and door tweeter locations. Is the R165-S suitable for a marine or outdoor installation? No. The R165-S uses a foam surround and is designed for standard automotive interior use. It is not rated for UV, moisture, or salt-fog exposure. For marine and outdoor applications, Rockford Fosgate's Punch Marine speaker range (PM282 and similar) is the appropriate choice. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

16 Foot (4.8 Metre) Twisted Pair RCA Signal Cable OFC, Platinum Ends, RFI/EMI Rejection, Split Center Pin, Frosted Woven Shield. The Rockford Fosgate RFI-16 is a 16-foot (4.8-metre) twisted pair RCA signal cable the same platform as the RFI-20 in a shorter length. OFC conductors, platinum-plated ends, twisted pair RFI/EMI rejection, split center pin, and frosted woven outer shield. At 4.8 metres, the RFI-16 suits shorter vehicle runs compact vehicles, front-boot installations, or runs where the RFI-20's 6m length would leave excess slack. Key Specifications Specification Detail Part Number RFI-16 Type RCA Signal Cable Length 16 feet (4.8 metres) ✓ Conductor OFC ✓ End Plating Platinum ✓ Design Twisted Pair ✓ Shield Woven, frosted ✓ Noise Rejection RFI and EMI ✓ Center Pin Split ✓ Channels Not confirmed Warranty Not specified FAQs How does the RFI-16 differ from the RFI-20? Identical construction — the only difference is length: RFI-16 is 16 feet (4.8m), RFI-20 is 20 feet (6m). Select based on the routing length required for your vehicle installation. Is the channel count stereo or mono? Not confirmed — confirm from the official Rockford Fosgate RFI-16 product page. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-300X4 Prime 300 Watt 4-Channel Class D Amplifier When four speakers need real power without compromise, the R2-300X4 delivers 300 watts of clean, efficient Class D performance engineered by Rockford Fosgate. Product Overview The R2-300X4 is part of Rockford Fosgate's 3rd generation Prime Series, built for car audio enthusiasts who demand reliable, high-performance amplification at an accessible price. Operating as a full-range Class D 4-channel amplifier, it runs at 4 ohm or 2 ohm stereo and 4 ohm bridged/mono, giving it the flexibility to drive front and rear speaker pairs or reconfigure as a 3-channel or 2-channel setup. Class D topology maximises efficiency and reduces the electrical load on the vehicle's charging system, while MEHSA 4 (Maximum Efficiency Heat Sink Application) actively reduces MOSFET temperatures, lowers distortion, and prolongs output device lifespan. The top-mounted control panel provides independent front and rear controls within easy reach, and CTA-2006 compliant power ratings confirm that the 300W output is a real, tested figure. Designed and engineered in Tempe, Arizona, the R2-300X4 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red for both front and rear) to accurately match the source unit's output to the amplifier's input sensitivity, eliminating guesswork and reducing distortion at the source. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. MEHSA 4 (Maximum Efficiency Heat Sink Application): An advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's outputs and protects against shorting speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. Fully Adjustable Butterworth Crossovers: Independent front and rear 12 dB/octave High-Pass and Low-Pass crossovers, continuously variable from 50 to 250 Hz, with an All-Pass option per channel for full-range output when no filtering is needed. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V) through a 2/4 Channel Input Selection Switch, making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing downstream amplifiers to be added without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-300X4 Series Prime Number of Channels 4 Amplifier Class Class D, Full Range Total RMS Power 300W RMS Power @ 4 Ohm 50W x 4 RMS Power @ 2 Ohm 75W x 4 Bridged Power @ 4 Ohm 150W x 2 Dynamic Power @ 4 Ohm 70W x 4 Dynamic Power @ 2 Ohm 115W x 4 Dynamic Power Bridged @ 4 Ohm 230W x 2 Bridgeable Yes Minimum Impedance (Stereo) 2 Ohm Minimum Impedance (Bridged) 4 Ohm Frequency Response 20 Hz - 20 kHz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input (Front) 4 x RCA low-level, 4-Pin Molex high-level Signal Input (Rear) 4 x RCA low-level, 4-Pin Molex high-level Input Switch 2/4 Channel (RCA and high-level compatible) Signal Output 2 x RCA pass-through (active with RCA or high-level input) Crossover (Front and Rear) High-Pass / Low-Pass: 50-250 Hz @ 12 dB/octave Butterworth All-Pass Yes Tone Controls No Remote Controls No Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT Front (Blue/Red), C.L.E.A.N. OUT Rear (Blue/Red) Operating Voltage 9-16V DC Max Current Draw (13.8V Sinewave) 39A Recommended Fuse 60A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 10.1" (4.9 cm x 17.3 cm x 25.5 cm) Weight 4.75 lbs (2.15 kg) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-300X4 pairs naturally with Rockford Fosgate Prime Series full-range speakers such as the R165X3, R168X2, R169X2, and R169X3 for a matched front and rear speaker setup. For systems requiring low-end support, the rear channels bridge cleanly to drive a single Prime R1 subwoofer such as the R1S410 or R1S412, with the rear crossover set to Low-Pass. A 4-gauge amplifier wiring kit is required for power and ground runs, and 8-gauge cable is needed for speaker outputs. A quality 4-channel RCA interconnect is recommended for clean signal transfer from the head unit. Frequently Asked Questions Can the R2-300X4 be used to power both speakers and a subwoofer in the same system? Yes. The R2-300X4 supports 3-channel configuration, where the front channels power a pair of full-range speakers and the rear channels are bridged to drive a single subwoofer. Setting the rear crossover to Low-Pass rolls off high frequencies to the sub. The minimum impedance of any bridged channel is 4 ohms, so confirm subwoofer impedance before bridging. Does the R2-300X4 require a remote turn-on wire? When using RCA inputs, a remote turn-on wire must be connected to the head unit's remote output. When using high-level speaker inputs, the Auto-Sense bypass switch can be enabled to allow the amplifier to detect an incoming signal and power on automatically, making it compatible with factory head units and systems that lack a dedicated remote output, including those with Retained Accessory Power (RAP). What does the NOMAD protection system do? NOMAD is a real-time analogue computer built into the R2-300X4 that continuously monitors the amplifier's speaker outputs. It protects the amplifier from damage caused by shorted speaker wires and dangerously low speaker impedances, providing active, dynamic protection rather than relying solely on a fuse. What gauge power, ground, and speaker wire does the R2-300X4 require? Rockford Fosgate specifies 4 AWG for power and ground runs using the included compression terminal block connectors. Speaker output connections use 8 AWG wire. The recommended 60A fuse is not included in the box and must be sourced separately, installed as close to the battery as possible. Can the R2-300X4 be bridged into a 2-ohm load for maximum power? No. When bridging the R2-300X4, the minimum supported impedance per bridged output is 4 ohms. Running a bridged channel into a 2-ohm load is not supported and risks amplifier failure or NOMAD-triggered protection shutdown. In standard stereo mode, the minimum impedance per channel is 2 ohms.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

65W RMS 6"×9" Factory Replacement The Highest-Rated Prime Speaker, Silk Dome Tweeter, Grilles and Mounting Hardware Included. Product Overview The Rockford Fosgate Prime R169X2 is a 6"×9" 2-way full-range speaker rated at 65W RMS the highest power rating in the Rockford Fosgate Prime speaker range. Designed for the 6"×9" oval speaker format found in rear decks, parcel shelves, and door panels of many Australian passenger vehicles and utes, it combines a vacuum polypropylene cone woofer with a flush-mounted silk dome tweeter and integrated tweeter crossover for a factory replacement upgrade with Rockford Fosgate's audio quality. The kit confirms grille and mounting hardware inclusion resolving the uncertainty present on the 6"×8" R168X2. At 65W RMS, the R169X2 suits both head unit-level installations and amplified builds with the Rockford Fosgate T series 4-channel amplifiers. Pack contents are implied as a pair by the "X2" SKU suffix and "kit" language confirm single vs pair with Rockford Fosgate before purchasing. Key Specifications Speaker size: 6"×9" (oval) Configuration: 2-way full-range Power handling (RMS): 65W per speaker (confirmed — highest in Prime range) Peak power: Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Cone material: Vacuum polypropylene Surround: Rubber Basket: Stamped steel Tweeter: Silk dome, flush mounted Crossover: Integrated tweeter crossover (included in kit) Grilles: Included ✓ Mounting hardware: Included ✓ Pack contents: Single or pair — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Cutout dimensions: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 65W RMS — Highest in the Prime Speaker Range — The R169X2's 65W RMS rating exceeds every other Prime speaker in this catalogue — 10W more than the R168X2 (6"×8") and 20W more than the 6.5" and 6.75" models. This provides greater headroom for amplified installations and reflects the larger 6"×9" cone's ability to handle more sustained power input. 6"×9" Oval — Maximum Cone Area in the Prime Range — The 6"×9" is the largest oval format in the Prime speaker range, offering the greatest cone area and the best low-frequency output potential of any speaker in this catalogue. In vehicles with rear deck or parcel shelf 6"×9" positions, this format commonly provides the best bass extension of any speaker that fits without a separate subwoofer. Silk Dome Flush-Mounted Tweeter — Smooth, warm high-frequency reproduction from a silk dome design — the same tweeter technology as the R14X2, R1525X2, R1675X2, and R168X2, delivering consistent and non-fatiguing highs across the Prime 2-way range. Integrated Tweeter Crossover — Built-in crossover included in the kit — no external crossover component required for installation. Grilles and Mounting Hardware Included — The kit confirms grille inclusion — complete with all mounting hardware for a finished, ready-to-install factory replacement. Vacuum Polypropylene Cone, Rubber Surround — Proven moisture-resistant construction for long-term reliability in Australian vehicle environments. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R169X2 Series Prime Speaker Size 6"×9" (oval) Configuration 2-Way Full-Range Power Handling (RMS) 65W per speaker ✓ Peak Power Not specified Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Tweeter Silk Dome, Flush Mounted Crossover Integrated (tweeter, included) Cone Material Vacuum Polypropylene Surround Rubber Basket Stamped Steel Grilles Included ✓ Mounting Hardware Included ✓ Sold As Single or pair — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Mounting Depth Not specified — confirm with Rockford Fosgate Cutout Dimensions Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Factory 6"×9" oval door, rear deck, and parcel shelf speaker locations Common in many Australian passenger vehicles, SUVs, and utes with rear deck speaker positions Complete Rockford Fosgate Prime speaker range comparison: Model Size Config RMS Tweeter Grilles R14X2 4" round 2-Way 30W ✓ Silk Dome ✓ R1525X2 5.25" round 2-Way TBC Silk Dome TBC R165X3 6.5" round 3-Way 45W ✓ Piezo ✓ R1675X2 6.75" round 2-Way 45W ✓ Silk Dome ✓ R168X2 6"×8" oval 2-Way 55W ✓ Silk Dome TBC R169X2 6"×9" oval 2-Way 65W ✓ Silk Dome ✓ Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers 6"×9" oval speaker adaptors or baffles if required for cavity clearance Frequently Asked Questions Is the 6"×9" format the same as a standard 6.5" speaker? No. The 6"×9" is an oval speaker format with a specific non-round cutout. It is not interchangeable with round 6.5", 6.75", or any other round speaker positions without an adaptor. Confirm your vehicle uses a 6"×9" oval cutout before purchasing. What vehicles commonly use a 6"×9" rear deck or parcel shelf speaker? The 6"×9" oval is one of the most common rear deck speaker formats in Australian passenger vehicles — found in a wide range of sedans, hatchbacks, wagons, and SUVs. Always confirm your vehicle's specific speaker size using a vehicle fit guide or the owner's manual before purchasing. Is the R169X2 sold as a pair or single speaker? The supplier description uses "kit" language and the SKU suffix "X2" is consistent with other confirmed-pair Prime models. However, pair status is not explicitly confirmed for the R169X2. Confirm with Rockford Fosgate before purchasing. Why does the R169X2 have a higher RMS rating than the 6.5" and 6.75" models? The 6"×9" oval format has a larger cone area than 6.5" or 6.75" round speakers. Larger cone area generally correlates with greater power handling capacity — the R169X2's 65W RMS reflects the larger driver's ability to dissipate more heat and withstand greater sustained power input. Are grilles included with the R169X2? Yes — the product description confirms "Includes grilles so they look as good as they sound." The kit includes both grilles and all mounting hardware. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate Sound Quality in a 5.25" Factory Replacement 2-Way Full-Range with Silk Dome Tweeter, Grilles and Mounting Hardware Included. Product Overview The Rockford Fosgate Prime R1525X2 is a 5.25" 2-way full-range speaker combining a vacuum polypropylene cone woofer with a flush-mounted silk dome tweeter and integrated tweeter crossover designed as a quality factory replacement for vehicles with 5.25" speaker locations. The same Prime series construction as the R14X2 (4") applied to the larger 5.25" format, offering improved low-frequency extension and output capacity from the bigger cone area. Compatible with standard 5.25" factory speaker positions in doors, dash panels, and rear decks, the R1525X2 includes grilles and all mounting hardware for a complete installation without additional accessory purchases. The Rockford Fosgate Prime series positions brand-quality audio at a value price point the practical starting point for buyers upgrading factory speakers who want a recognised audio brand without the cost of the full Power or T series ranges. Key Specifications Speaker size: 5.25 inch Configuration: 2-way full-range (woofer + silk dome tweeter) Power handling (RMS): Not specified — confirm with Rockford Fosgate Peak power: Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Cone material: Vacuum polypropylene Surround: Rubber Basket: Stamped steel Tweeter: Silk dome, flush mounted Crossover: Integrated tweeter crossover Grilles: Included Mounting hardware: Included Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Pack contents: Single or pair — confirm with Rockford Fosgate (see Red-flags) Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 5.25" — More Bass Extension Than 4" Factory Speakers — The larger 5.25" cone area moves more air than a 4" speaker, producing improved low-frequency output and extension. For vehicles with 5.25" speaker positions, the R1525X2 is a direct upgrade over both the original factory single-cone speaker and a basic replacement globe — without requiring additional equalisation or subwoofer support for casual listening levels. Silk Dome Flush-Mounted Tweeter — The soft silk dome tweeter delivers smooth, detailed high-frequency reproduction without the harshness associated with harder dome materials. Flush-mounting integrates the tweeter directly into the cone assembly, maintaining the compact form factor of a single-cutout factory replacement. Vacuum Polypropylene Cone — Moisture-resistant and dimensionally stable, polypropylene is a proven woofer cone material for car audio — handling the temperature and humidity variations of Australian vehicle environments without degradation over time. Integrated Tweeter Crossover — The internal crossover filters high-frequency content to the tweeter at the appropriate crossover point, eliminating the need for an external crossover component. Installation is identical in complexity to a single-cone factory replacement — connect to the speaker terminals and done. Rubber Surround — Rubber surrounds provide superior long-term durability compared to foam alternatives — maintaining consistent compliance across the temperature range encountered in Australian vehicles during summer and winter. Grilles and Mounting Hardware Included — A complete installation kit: grilles for a finished appearance and all hardware needed to secure the speakers in factory mounting positions. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R1525X2 Series Prime Speaker Size 5.25 inch Configuration 2-Way Full-Range Power Handling (RMS) Not specified — confirm with Rockford Fosgate Peak Power Not specified Impedance Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Cone Material Vacuum Polypropylene Surround Rubber Basket Stamped Steel Tweeter Silk Dome, Flush Mounted Crossover Integrated (tweeter) Grilles Included Mounting Hardware Included Mounting Depth Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified — confirm with Rockford Fosgate Pack Contents Single or pair — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Factory 5.25" door, dash, or rear deck speaker locations Vehicles with 5.25" OEM speaker cutouts requiring direct factory replacement Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers for amplified operation Speaker baffles or spacers if cavity depth is borderline for mounting clearance Frequently Asked Questions Is the R1525X2 sold as a single speaker or a pair? The SKU suffix "X2" is consistent with the R14X2 (which is a confirmed pair), suggesting the R1525X2 may also be sold as a pair. However, the product title does not explicitly state "pair." Confirm pack contents with Rockford Fosgate or your authorised reseller before purchasing. Does the R1525X2 need an external crossover to install? No. The integrated tweeter crossover is built into each speaker unit. No separate external crossover component is required — the R1525X2 connects directly to existing speaker wiring as a factory replacement. Will the R1525X2 fit my vehicle's 5.25" speaker location? The R1525X2 is designed for standard 5.25" factory speaker positions. Mounting depth and exact cutout diameter are not confirmed in the supplier data — confirm these dimensions with Rockford Fosgate or a vehicle-specific fitment guide before purchasing, particularly for vehicles where cavity depth is limited. What is the power handling of the R1525X2? Power handling (RMS and peak) is not confirmed in the supplier data for this model. Pull the official Rockford Fosgate R1525X2 specification sheet or contact Rockford Fosgate for the confirmed RMS rating before selecting an amplifier to drive these speakers. How does the R1525X2 compare to the R14X2? Both are Prime series 2-way full-range speakers with identical construction — polypropylene cone, rubber surround, silk dome tweeter, integrated crossover. The R1525X2's 5.25" cone provides more cone area than the R14X2's 4" cone — typically resulting in improved low-frequency output and extension. Select the size that matches your vehicle's factory speaker cutout. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

4 AWG Distribution Block 1 Input (1/0 or 4 AWG), 3 Outputs (4 or 8 AWG), Removable Gauge Adapter Rings. Custom Tooled Solid Brass, HPP Platinum Finish. Product Overview The Rockford Fosgate RFD4 is a 4 AWG distribution block with one input and three outputs, featuring removable interior adapter rings that allow the terminal openings to be adjusted for different wire gauges. The input accepts either 1/0 AWG or 4 AWG wire; each of the three outputs accepts either 4 AWG or 8 AWG wire. This flexibility makes the RFD4 suitable for distributing power from a main 1/0 AWG or 4 AWG run to three smaller-gauge output cables serving individual amplifiers or accessories. Constructed from custom-tooled solid brass with HPP platinum finish. Key Specifications Part number: RFD4 Configuration: 1 input / 3 outputs Input wire sizes: 1/0 AWG or 4 AWG ✓ Output wire sizes: 4 AWG or 8 AWG per output ✓ Gauge adjustment: Removable interior adapter rings ✓ Construction: Custom tooled solid brass ✓ Plating: HPP (High Performance Plating) — platinum finish ✓ Corrosion resistance: Superior (HPP confirmed) ✓ Terminal type: Not specified — confirm with Rockford Fosgate Current rating: Not specified — confirm with Rockford Fosgate Mounting: Not specified — confirm with Rockford Fosgate Dimensions: Not specified Weight: Not specified Warranty: Not specified Features & Benefits 1 In / 3 Out Configuration — Splits one main power or ground cable into three independent output runs — suitable for distributing power to three amplifiers or accessories from a single main supply cable. Removable Interior Adapter Rings — Multi-Gauge Flexibility — Removable adapter rings inside the terminal openings allow the output ports to accept either 4 AWG or 8 AWG wire depending on which ring is installed. This allows the same block to serve installations with different wire gauges across the three outputs without requiring separate distribution blocks. 1/0 AWG or 4 AWG Input — The input accommodates both 1/0 AWG (for high-power main runs) and 4 AWG (for medium-power main runs), allowing the RFD4 to serve at different points in a power distribution chain. Custom Tooled Solid Brass — Machined from solid brass for high current capacity, precise tolerances, and long-term mechanical reliability. HPP Platinum Plating — Corrosion-resistant coating maintaining low contact resistance at all terminals over time. Technical Specs Specification Detail Brand Rockford Fosgate Part Number RFD4 Configuration 1 Input / 3 Outputs Input Wire Sizes 1/0 AWG or 4 AWG ✓ Output Wire Sizes 4 AWG or 8 AWG (per output) ✓ Gauge Adjustment Removable Interior Adapter Rings ✓ Construction Custom Tooled Solid Brass ✓ Plating HPP Platinum ✓ Terminal Type Not specified — confirm with Rockford Fosgate Current Rating Not specified — confirm with Rockford Fosgate Mounting Not specified Dimensions Not specified Warranty Not specified Compatible With / Goes Well With Suitable for: Distributing a 4 AWG main run to three smaller amplifiers or accessories Secondary distribution from a 1/0 AWG main run (with RFD1 as primary block) Multi-amplifier and multi-accessory systems requiring three 4 AWG or 8 AWG output branches Pairs well with: Rockford Fosgate RFD1 (1/0 AWG primary distribution) as a secondary block Rockford Fosgate 4 AWG and 8 AWG wire runs RFT4 / RFTS4 ring terminals for 4 AWG output connections Frequently Asked Questions How do the removable adapter rings work? The interior adapter rings are removable inserts that line the terminal openings. With the 4 AWG ring installed, the port accepts 4 AWG wire; removing it allows the larger opening to accept 8 AWG wire (or vice versa — confirm the exact adapter ring operation from the official Rockford Fosgate RFD4 product page, as the description may indicate rings reduce rather than enlarge the opening). What is the difference between the RFD4 and RFD1? The RFD1 is a 1-in 2-out block accepting 1/0 AWG or 4 AWG on all ports. The RFD4 is a 1-in 3-out block with 1/0 AWG or 4 AWG input and 4 AWG or 8 AWG outputs — with removable adapter rings for gauge flexibility. The RFD4 is better suited for distributing to three lighter-gauge output runs. What is the maximum current capacity of the RFD4? Not confirmed in the supplier data. The solid brass construction with 1/0 AWG input capability indicates a high-current design — confirm the rated current from the official Rockford Fosgate RFD4 product page. How is the RFD4 mounted? Mounting method not specified. Confirm from the official product page. Can the RFD4 be used for ground runs? Yes — a distribution block functions equally for positive (power) and negative (ground) runs, provided all terminals are connected to the same polarity. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P1694 Punch 6"x9" 4-Way Full Range Speaker Premium 6"x9" 4-way full-range coaxial speakers engineered for fanatics demanding superior sound quality over factory-installed speakers. The Rockford Fosgate P1694 Punch Series delivers exceptional audio performance through advanced driver technology, FlexFit basket design for universal compatibility, and integrated concealed crossover eliminating external mounting requirements. Rated at 75 watts RMS and 150 watts maximum power handling, these speakers transform your vehicle's audio system with crystal-clear highs, detailed midrange, and punchy bass response. CEA-2031 compliant construction ensures reliable performance meeting industry standards while butyl rubber surrounds and mineral-filled polypropylene cones provide durability for years of listening enjoyment. Product Overview The Rockford Fosgate P1694 represents a comprehensive upgrade solution specifically designed for enthusiasts replacing inadequate factory speakers with premium aftermarket performance. This 4-way coaxial speaker system delivers fuller, more detailed sound reproduction compared to standard 2-way or 3-way designs through dedicated frequency-specific drivers working in harmony. The advanced 4-way array includes mineral-filled polypropylene woofer cone, dedicated midrange driver with butyl rubber surround, PEI dome tweeter, and super tweeter configuration ensuring accurate frequency response across the entire audio spectrum. Installation flexibility defines the P1694 through innovative FlexFit basket design accommodating odd-shaped factory speaker locations without modification. The included OEM adapter plate ensures compatibility with various vehicle mounting configurations while the Integrated Concealed Crossover (ICC) eliminates external black boxes simplifying installation and maintaining clean appearance. Professional installers and DIY enthusiasts appreciate the complete package including two speakers with protective grilles, comprehensive mounting hardware, and integrated crossover components ready for immediate installation. The 4-ohm nominal impedance provides excellent compatibility with factory amplifiers and aftermarket head units while maintaining efficient power transfer. CEA-2031 compliance guarantees performance specifications meet rigorous industry testing standards ensuring reliable power handling and frequency response claims. The 3.07-inch mounting depth accommodates most vehicle door and rear deck installations without interference concerns while butyl rubber surrounds resist environmental degradation maintaining performance integrity through temperature extremes and humidity exposure. Key Features FlexFit Basket Design: Innovative flexible mounting system accommodates odd-shaped factory speaker locations ensuring compatibility with diverse vehicle installations without modification requirements. 4-Way Coaxial Configuration: Advanced driver array with dedicated woofer, midrange, tweeter, and super tweeter providing comprehensive frequency coverage and superior sound staging compared to 2-way or 3-way designs. PEI Dome Tweeter: Premium polyethylene terephthalate tweeter delivers crisp, detailed high-frequency response with excellent dispersion characteristics and minimal distortion. Butyl Midrange Rubber Surround: Durable butyl rubber construction resists environmental degradation maintaining consistent performance through temperature variations and humidity exposure. Injection Molded Mineral Filled Polypropylene Cone: Rigid yet lightweight woofer cone construction provides excellent bass response with minimal flex distortion and superior durability. Integrated Concealed Crossover (ICC): Built-in high-pass crossover eliminates external mounting requirements simplifying installation and maintaining clean appearance without sacrificing performance. OEM Adapter Plate Included: Factory-compatible mounting plate ensures proper fitment with various vehicle speaker locations accommodating diverse installation requirements. CEA-2031 Compliant: Industry-standard certified performance specifications guarantee reliable power handling and frequency response meeting rigorous testing requirements. Complete Installation Package: Includes two speakers with protective grilles, comprehensive mounting hardware, and integrated crossover components ready for immediate installation. 4-Ohm Nominal Impedance: Optimal impedance rating provides excellent compatibility with factory amplifiers and aftermarket head units ensuring efficient power transfer. 75 Watts RMS Power Handling: Robust power capacity handles demanding listening levels with 150 watts maximum power capability providing headroom for dynamic musical passages. 3.07-Inch Mounting Depth: Shallow mounting profile accommodates most vehicle door and rear deck installations without interference concerns or modification requirements. Technical Specifications Specification Details Product Code P1694 Brand Rockford Fosgate Series Punch Speaker Size 6"x9" (6-inch x 9-inch) Speaker Type 4-Way Coaxial Full Range Nominal Impedance 4-Ohm Power Handling RMS 75 Watts Power Handling Maximum 150 Watts Tweeter Size 0.75" (19.0mm) PEI Dome Tweeter Material PEI (Polyethylene Terephthalate) Midrange Surround Butyl Rubber Woofer Cone Material Injection Molded Mineral Filled Polypropylene Mounting Depth 3.07" (78mm) Crossover Type Integrated Concealed Crossover (ICC) Basket Design FlexFit Universal Compatibility CEA-2031 Compliance Yes Grilles Included Yes Mounting Hardware Yes OEM Adapter Plate Yes Quantity 2 Speakers (Pair) Shipping Weight 8.8 lbs (3.99 kg) Frequently Asked Questions Q: Will these speakers fit my vehicle's factory speaker locations? A: The P1694 features FlexFit basket design specifically engineered to accommodate odd-shaped factory speaker locations. The included OEM adapter plate ensures compatibility with various vehicle mounting configurations. Verify your factory speaker size is 6"x9" and mounting depth allows at least 3.07 inches clearance. Contact us with your vehicle year, make, and model to confirm fitment. Q: Do I need an external amplifier for these speakers? A: No external amplifier is required. The P1694 works excellently with factory head units and amplifiers rated at 75 watts RMS per channel. However, pairing with an aftermarket amplifier capable of delivering 75 watts RMS at 4 ohms per channel will maximize performance potential and dynamic range. Q: What's the difference between 4-way and 2-way speakers? A: The P1694 4-way design includes dedicated woofer, midrange, tweeter, and super tweeter providing more accurate frequency reproduction across the audio spectrum compared to 2-way speakers with only woofer and tweeter. This results in fuller sound with better detail, clarity, and sound staging particularly noticeable in complex musical passages. Q: Do these speakers require an external crossover? A: No external crossover is required. The P1694 features an Integrated Concealed Crossover (ICC) built directly into the speaker assembly. This eliminates external black boxes simplifying installation while maintaining optimal frequency distribution to each driver without performance compromise. Q: Are speaker grilles and mounting hardware included? A: Yes, the complete package includes two speakers with protective grilles, comprehensive mounting hardware, OEM adapter plates, and integrated crossover components. Everything needed for installation is provided except vehicle-specific wiring adapters which may be required depending on your vehicle. Q: What does CEA-2031 compliance mean? A: CEA-2031 is an industry standard testing protocol ensuring power handling and performance specifications meet rigorous requirements. Rockford Fosgate's compliance guarantees the P1694's rated 75 watts RMS and 150 watts maximum power handling are tested and verified rather than theoretical claims. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

4" 2-Way Punch Series Coaxial 30W RMS, 86.5dB, 100Hz–22kHz, FlexFit Basket, 4"×6" and 6"×8" Adapter Plates Included. Product Overview The Rockford Fosgate Punch P142 is a pair of 4" 2-way coaxial speakers rated at 30W RMS (60W peak) the 4" step up from the 3.5" P132 in the Punch series. Confirmed specifications include 4Ω impedance, 86.5dB sensitivity at 1W/1M, and a frequency response of 100Hz to 22kHz extending 20Hz lower than the P132 for slightly improved lower-midrange reproduction from the larger 4" cone. The P142 broadens the adapter plate coverage in the Punch series kit: both a 4"×6" and a 6"×8" oval adapter plate are included alongside the standard mounting hardware, allowing the P142 to be fitted into oval speaker positions as well as standard round 4" locations. CEA-2031 compliant power handling confirms the 30W RMS rating is measured to industry standards. FlexFit basket, PEI dome tweeter with Integrated Concealed Crossover (ICC), injection-moulded mineral-filled polypropylene cone, and butyl rubber surround are consistent with the P132 platform. Grilles are not included. Key Specifications Speaker size: 4.0 inch (nominal diameter) Configuration: 2-way coaxial Power handling (RMS): 30W per speaker (CEA-2031 compliant) Power handling (peak): 60W per speaker Impedance: 4Ω Sensitivity: 86.5dB @ 1W/1M Frequency response: 100Hz – 22kHz Mounting depth: 1.69" (43mm) Tweeter: PEI dome (size not specified — confirm with Rockford Fosgate) Crossover: Integrated Concealed Crossover (ICC) — built into tweeter Cone: Injection-moulded mineral-filled polypropylene Surround: Butyl rubber Basket: FlexFit OEM adapter plates: 4"×6" and 6"×8" (both included) Mounting hardware: Included Grilles: Not included Sold as: Pair (2 speakers) CEA-2031 compliant: Yes Shipping weight: 3.2 lbs (1.45 kg) per pair Cutout diameter: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Dual OEM Adapter Plates — 4"×6" and 6"×8" — The P142 kit is unusually versatile in its adapter plate coverage: both a 4"×6" oval and a 6"×8" oval adapter plate are included alongside the standard mounting hardware. This extends the P142's fitment range across three speaker position formats — standard 4" round, 4"×6" oval, and 6"×8" oval — from a single purchase. CEA-2031 Compliant Power Handling — The 30W RMS figure is measured in compliance with CEA-2031, the industry standard for amplifier and speaker power measurement. CEA-2031 compliance confirms the RMS figure is a sustained, industry-validated measurement rather than a marketing peak figure — an important distinction when comparing speakers from different manufacturers. 100Hz – 22kHz Frequency Response — Extending 20Hz lower than the P132 (120Hz), the 4" P142 reproduces down to 100Hz — covering more of the low-midrange and upper bass region from the door speaker itself, reducing the gap between the speaker's lower limit and the subwoofer's upper range. 86.5dB Sensitivity — 1.5dB more sensitive than the P132 (85dB) — a measurable improvement in output per watt. At 86.5dB, the P142 produces slightly more volume from equivalent head unit or amplifier power. FlexFit Basket — Rockford Fosgate's non-standard basket geometry for compatibility with OEM speaker cavities that do not accept a standard circular basket — the same design as the P132, scaled to 4". PEI Dome Tweeter with ICC — Polyetherimide dome tweeter with the Integrated Concealed Crossover built into the tweeter assembly — no external crossover component required, no black box to mount, clean concealed installation. Injection-Moulded Mineral-Filled Polypropylene Cone — Mineral filling adds stiffness and damping to the polypropylene matrix — reducing resonance colouration in the midrange for more accurate reproduction between 100Hz and the tweeter's crossover point. Butyl Rubber Surround — Superior durability versus foam surrounds — resistant to UV, heat, and chemical exposure. Appropriate for Australian vehicle environments where dashboard and door panel temperatures can be significant. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P142 Series Punch Speaker Size 4.0 inch Configuration 2-Way Coaxial Power Handling (RMS) 30W per speaker ✓ (CEA-2031) Power Handling (Peak) 60W per speaker ✓ Impedance 4Ω ✓ Sensitivity 86.5dB @ 1W/1M ✓ Frequency Response 100Hz – 22kHz ✓ Mounting Depth 1.69" (43mm) ✓ Tweeter PEI Dome (size TBC) Crossover ICC (Integrated Concealed, in tweeter) ✓ Cone Injection-Moulded Mineral-Filled Polypropylene Surround Butyl Rubber Basket FlexFit CEA-2031 Compliant Yes ✓ OEM Adapter Plates 4"×6" and 6"×8" (both included) ✓ Mounting Hardware Included ✓ Grilles Not Included ✓ Sold As Pair (2 speakers) ✓ Shipping Weight 3.2 lbs / 1.45 kg per pair ✓ Cutout Diameter Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions (with included adapters): Standard round 4" speaker positions 4"×6" oval speaker positions (adapter included) 6"×8" oval speaker positions (adapter included) Punch series comparison — P132 vs P142: Feature P132 (3.5") P142 (4") RMS 20W ✓ 30W ✓ Sensitivity 85dB ✓ 86.5dB ✓ Freq. Response 120Hz–22kHz ✓ 100Hz–22kHz ✓ Mounting Depth 35mm ✓ 43mm ✓ Adapter Plates 1 × OEM 4"×6" + 6"×8" ✓ CEA-2031 Not stated Yes ✓ Weight (pair) 0.95 kg ✓ 1.45 kg ✓ Pairs well with: Rockford Fosgate T400-4 or T600-4 4-channel amplifiers Dedicated subwoofer system for bass below 100Hz Weight 1.45 kg per pair (shipping weight).  Frequently Asked Questions What positions can the P142 be installed in? The P142 works in standard 4" round speaker positions, and with the included adapter plates, can also be installed in 4"×6" and 6"×8" oval positions. This makes the P142 one of the more versatile Punch series speakers in terms of vehicle compatibility from a single kit. What does CEA-2031 compliant mean for the power rating? CEA-2031 is the Consumer Electronics Association's standard for measuring amplifier and speaker power handling. A CEA-2031 compliant RMS figure means the 30W rating is measured under standardised, sustained conditions — not a brief peak figure. This makes the P142's 30W RMS directly comparable to other CEA-2031 rated products. How does the P142 compare to the P132? The P142 steps up from the 3.5" P132 with a 4" cone, 30W RMS (vs 20W), 86.5dB sensitivity (vs 85dB), 100Hz lower frequency limit (vs 120Hz), and dual oval adapter plates (4"×6" and 6"×8") versus the P132's single OEM adapter. Both share the same FlexFit basket, PEI dome tweeter, ICC crossover, mineral-filled cone, and butyl rubber surround construction. Why does the frequency response start at 100Hz? A 4" cone has physical limits on how efficiently it reproduces very low frequencies. Below 100Hz, a dedicated woofer or subwoofer is required. The P142 works well as a midrange and treble driver in a system that pairs it with a subwoofer for low-frequency extension. Are grilles included with the P142? No — grilles are not included. The kit contains two speakers, two adapter plates (4"×6" and 6"×8"), and mounting hardware only. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6.75" Shallow 2-Way Power Series Coaxial 75W RMS, Pole-Mounted Aluminium Dome Tweeter, Carbon Fibre Composite Cone, ICC Crossover, Grilles Included. Product Overview The Rockford Fosgate Power T1675 is a 6.75" 2-way coaxial speaker rated at 75W RMS a shallow-depth design confirmed in the supplier description, enabling installation in door panels and cavities where a standard-depth 6.75" speaker would not fit without modification. The kit includes grilles, an OEM adapter plate, integrated concealed crossovers, and all mounting hardware. The T1675 uses the Power series construction platform: a carbon fibre and polypropylene injection-moulded composite cone, a pole-mounted aluminium dome tweeter with polyurethane suspension, a butyl rubber surround, a FlexFit basket for OEM cavity compatibility, and an ICC (Integrated Concealed Crossover). The pole-mounted tweeter sits elevated above the woofer cone on a central post, improving high-frequency dispersion compared to a flush-mounted design. Full technical specifications exact mounting depth, impedance, sensitivity, frequency response, and crossover details are not provided in the supplier data. Key Specifications Speaker size: 6.75 inch (shallow design confirmed) Configuration: 2-way coaxial Power handling (RMS): 75W per speaker (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Mounting depth: Shallow (exact depth not specified — confirm with Rockford Fosgate) Tweeter: Aluminium dome, pole-mounted, polyurethane suspension (size not specified) Crossover: ICC (Integrated Concealed Crossover) — slope not confirmed Cone: Carbon fibre and polypropylene injection-moulded composite Surround: Butyl rubber Basket: FlexFit OEM adapter plate: Included Grilles: Included ✓ Mounting hardware: Included Sold as: Pair (2 speakers — confirmed in description) CEA-2031 compliant: Not stated — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Shallow Mounting Depth — Specifically described as shallow-depth, the T1675 is designed for door panels and cavities with limited depth clearance behind the mounting surface. The exact mounting depth in millimetres is not confirmed in the supplier data — pull from the official Rockford Fosgate T1675 datasheet before purchasing for any depth-constrained installation. 75W RMS Power Handling — 75W RMS is confirmed per speaker, providing substantial headroom for amplified installations with Rockford Fosgate's T-series 4-channel amplifiers. Pole-Mounted Aluminium Dome Tweeter — The tweeter is elevated above the woofer cone on a central pole, improving high-frequency dispersion by placing the dome away from the acoustic interference zone of the woofer cone face. The aluminium dome with polyurethane suspension delivers fast, detailed treble with controlled resonance damping. Carbon Fibre and Polypropylene Composite Cone — The injection-moulded composite combines carbon fibre's high stiffness and low mass with polypropylene's moisture resistance — producing a lighter, stiffer diaphragm than standard polypropylene for more accurate midrange reproduction. ICC — Integrated Concealed Crossover — Crossover circuitry built directly into the tweeter assembly eliminates any external crossover component. Crossover slope and frequency are not confirmed in the supplier data — pull from the official datasheet. FlexFit Basket with OEM Adapter Plate — Non-standard basket geometry for OEM cavity compatibility with an included adapter plate for additional fitment positions. Butyl Rubber Surround — UV and heat-resistant synthetic rubber for long-term reliability in Australian vehicle environments. Grilles and Hardware Included — Complete kit for a finished installation. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T1675 Series Power Speaker Size 6.75 inch (shallow) Configuration 2-Way Coaxial Power Handling (RMS) 75W per speaker ✓ Peak Power Not specified — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Mounting Depth Shallow — exact depth not confirmed Tweeter Aluminium Dome, Pole-Mounted, Polyurethane Suspension Crossover ICC — slope not confirmed Cone Carbon Fibre & Polypropylene Composite Surround Butyl Rubber Basket FlexFit OEM Adapter Plate Included ✓ Grilles Included ✓ Mounting Hardware Included ✓ Sold As Pair (2 speakers) ✓ CEA-2031 Compliant Not confirmed Cutout Diameter Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Standard 6.75" round factory speaker positions with limited mounting depth clearance Vehicles using 6.75" OEM speaker positions — common in Chrysler, Dodge, Jeep, and selected other vehicles Additional positions with included OEM adapter plate Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer for bass below the 6.75" driver's confirmed lower frequency limit (TBC) Frequently Asked Questions What does "shallow mounting depth" mean for the T1675? Shallow mounting depth means the speaker extends less distance behind the mounting surface than a standard-depth 6.75" speaker. This is critical for door panel installations where the inner door structure limits the available cavity depth. The exact T1675 mounting depth must be confirmed from the Rockford Fosgate datasheet before purchasing for any depth-constrained installation. What is a pole-mounted tweeter and what advantage does it provide? A pole-mounted tweeter is elevated above the woofer cone on a central post, placing the dome in a position where high-frequency output is less affected by acoustic interference from the woofer cone surface. This produces a wider, more even treble spread across the listening area. Are grilles included with the T1675? Yes — grilles are confirmed in the product description alongside adapter plates and mounting hardware. What technical specifications are confirmed for the T1675? 75W RMS power handling, shallow mounting depth, pole-mounted aluminium dome tweeter with polyurethane suspension, carbon fibre composite cone, butyl rubber surround, FlexFit basket, ICC crossover, OEM adapter plate, grilles included, and sold as a pair are confirmed. Impedance, sensitivity, exact mounting depth, frequency response, and crossover specification must be pulled from the official Rockford Fosgate T1675 datasheet before publishing. What OEM adapter plate formats are included? The supplier description confirms adapter plates are included but does not specify oval formats. Confirm the specific adapter plate formats included with Rockford Fosgate or from the official T1675 datasheet. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less