Rockford Fosgate M1D2-12 M1 Series 12 Inch DVC 2-Ohm Color Optix Marine Subwoofer in White A marine grade 12 inch dual voice coil 2-ohm subwoofer in white with Color Optix RGB LED lighting, 300W RMS handling, and VersaSwitch impedance selection between 1-ohm and 4-ohm. Santoprene VAST surround, mineral-filled polypropylene cone, vented motor with nano-coated mesh screen, and integrated Deutsch/Amphenol plug-and-play connectors. Compatible with sealed and vented enclosures. IPX6 rated and ASTM B117 and G154 tested. Sold individually (1 each). Backed by a 2 year warranty. Product Overview The Rockford Fosgate M1D2-12 is an M1 series 12 inch dual voice coil (DVC) 2-ohm marine subwoofer in white, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). It shares the same platform and construction as the M1D2-12B but is finished in white. The DVC 2-ohm voice coils give the VersaSwitch settings of 1-ohm (parallel) and 4-ohm (series). The VersaSwitch allows impedance to be changed between 1-ohm (parallel) and 4-ohm (series) by flipping a single switch, without any additional wiring. Integrated Deutsch/Amphenol connectors are moulded directly into the basket frame, providing error-proof plug-and-play connectivity for both the speaker signal and Color Optix RGB lighting. Conventional zinc nickel-plated marine grade brass spade terminals are also included as an alternative wiring option. The cone is injection-moulded mineral-filled polypropylene with UV inhibitors, co-moulded with a Santoprene VAST surround. Rockford Fosgate's patented VAST technique increases the effective radiating cone area by up to 25%. A linear synthetic fiber blend spider provides consistent excursion control. The vented motor design with a water-repelling nano-coated mesh screen allows heat dissipation at high output levels while protecting the motor from water ingress. The 100% UV stable ASA plastic frame and grille resist discolouration in marine environments. Optically clear UV stable RGB lighting encapsulation protects the LED PCB throughout. The M1D2-12 is compatible with both sealed and vented enclosure configurations. Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. Klippel Verified certification applied. Sold individually - one subwoofer per purchase. The black version is available as the M1D2-12B. Features & Benefits VersaSwitch - 1-Ohm or 4-Ohm Without Rewiring: The VersaSwitch allows the DVC 2-ohm voice coils to be configured to parallel (1-ohm) or series (4-ohm) by flipping a single switch. The 1-ohm setting maximises output from compatible mono amplifiers, while the 4-ohm setting suits amplifiers better matched to a higher impedance load. Color Optix RGB LED Lighting - App Controlled: Ultra-bright wide-angle RGB LEDs are protected by optically clear UV stable encapsulation, controllable via the PMX-RGB controller and RF Connect app on iOS and Android. The PMX-RGB controller is sold separately. Integrated Deutsch/Amphenol Connectors - True Marine Ecosystem: Moulded in-frame Deutsch/Amphenol connectors combine speaker signal and Color Optix RGB lighting into a single error-proof plug-and-play connection. Zinc nickel-plated marine grade brass spade terminals are also included for standard wiring installations. Santoprene VAST Surround - UV and Salt-Fog Resistant: The Santoprene VAST surround is co-moulded to the mineral-filled polypropylene cone and attaches vertically using Rockford Fosgate's patented VAST technique, increasing the effective radiating cone area by up to 25% for more bass output from the same 12 inch driver. Vented Motor with Nano-Coated Water-Repelling Mesh Screen: The vented motor design allows heat to dissipate from the 2 inch (50mm) Kapton voice coil former at high output levels, while the nano-coated mesh screen prevents water from entering the motor assembly in spray-intensive marine environments. ASTM and ISO Tested - Purpose-Built Marine Construction: Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. IPX6 water intrusion rating confirms protection against powerful jets of water from any direction. Technical Specs Specification Detail SKU M1D2-12 Size 12 inch Colour White Voice Coil Type Dual Voice Coil (DVC) Nominal Impedance (each coil) 2 Ohm VersaSwitch Parallel 1 Ohm VersaSwitch Series 4 Ohm Power Handling 300W RMS / 1200W Peak SPL 92 dB (1W/1m) Frequency Response 20 Hz - 750 Hz Fs (Hz) 26 Vas (Litres) 114.2 Qts 0.53 Qes 0.57 Qms 7.47 Xmax 6.0mm Re (Ohms) 3.8 Le (mH) 2.02 Sd (cm2) 585.4 Woofer Displacement 3.49 cu.in (0.12 Litres) Voice Coil Diameter 2 inch (50mm) Voice Coil Former High Temp Kapton Magnet Weight 39.75 oz (1.13kg) Cutout Diameter 10.85 inch (275.6mm) Mounting Depth 6.65 inch (169.1mm) Surround Santoprene VAST Spider Linear Synthetic Fiber Blend Motor Design Vented with Nano-Coated Water-Repelling Mesh Screen Frame 100% UV Stable ASA Plastic Speaker Connector Integrated Deutsch/Amphenol + Zinc Nickel-Plated Brass Spade Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Surround Technology VAST Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Individually (1 each) Certifications Klippel Verified Shipping Weight 4.1kg Warranty 2 Years Compatible With / Goes Well With The M1D2-12 is suited to marine watercraft, pontoon boats, ski boats, and any vessel requiring a 12 inch marine subwoofer with Color Optix lighting. The VersaSwitch enables pairing with amplifiers rated at 1-ohm or 4-ohm. Sold individually - two units are required for a dual subwoofer installation. The black version is available as the M1D2-12B. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M5-1000X1 - M5 series 1000W marine monoblock amplifier, capable of 750W at 1-ohm - well matched to the M1D2-12 at 1-ohm VersaSwitch setting M2-500X1 - M2 series 500W mono marine amplifier for a matched M2 ecosystem pairing M5-1500X5 - M5 series 1500W 5-channel marine amplifier for full system builds pairing the M1D2-12 with marine full-range speakers M1D2-12B - Black version of this subwoofer for colour-matched installations M1D4-12 - White DVC 4-ohm version of this subwoofer (VersaSwitch 2-ohm/8-ohm) for comparison when amplifier impedance requirements differ Frequently Asked Questions What is the difference between the M1D2-12 and the M1D4-12? Both are white M1 series 12 inch Color Optix marine subwoofers with identical construction, power handling, and physical dimensions. The only difference is voice coil impedance. The M1D2-12 has DVC 2-ohm coils, giving VersaSwitch settings of 1-ohm (parallel) or 4-ohm (series). The M1D4-12 has DVC 4-ohm coils, giving VersaSwitch settings of 2-ohm (parallel) or 8-ohm (series). Choose based on your amplifier's recommended impedance - the M1D2-12 is the better choice for amplifiers designed to deliver maximum power at 1-ohm or 2-ohm loads. What impedance settings does the VersaSwitch provide on the M1D2-12? The M1D2-12 uses DVC 2-ohm voice coils. The VersaSwitch configures the coils to parallel (1-ohm total) or series (4-ohm total) without any rewiring. Use the 1-ohm parallel setting when pairing with an amplifier rated for 1-ohm operation for maximum power output, or the 4-ohm series setting when your amplifier is better suited to a higher impedance load. Is the M1D2-12 sold as a single unit or as a pair? The M1D2-12 is sold individually - one subwoofer per purchase. If your installation requires two subwoofers, two units will need to be added to the order. Does the Color Optix lighting require a separate controller? Yes. Color Optix RGB lighting requires the PMX-RGB controller and the RF Connect app (available on iOS and Android) to access full colour control, lighting effects, and brightness adjustment. The PMX-RGB controller is sold separately. The subwoofer can also be used without the controller at a fixed default colour setting straight out of the box. Does the M1D2-12 come in a black version? Yes. The black version is available as the M1D2-12B, sharing the same specifications and construction.

Read more less

Rockford Fosgate M1D2-10 M1 Series 10 Inch DVC 2-Ohm Color Optix Marine Subwoofer in White A marine grade 10 inch dual voice coil 2-ohm subwoofer in white with Color Optix RGB LED lighting, 300W RMS handling, and VersaSwitch impedance selection between 1-ohm and 4-ohm. Santoprene VAST surround, mineral-filled polypropylene cone, vented motor with nano-coated mesh screen, and integrated Deutsch/Amphenol plug-and-play connectors. Compatible with sealed and vented enclosures. IPX6 rated and ASTM B117 and G154 tested. Sold individually (1 each). Backed by a 2 year warranty. Product Overview The Rockford Fosgate M1D2-10 is an M1 series 10 inch dual voice coil (DVC) 2-ohm marine subwoofer in white, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). It shares the same platform, construction, and specifications as the M1D2-10B but is finished in white. The DVC 2-ohm voice coils give the VersaSwitch settings of 1-ohm (parallel) and 4-ohm (series). The VersaSwitch allows impedance to be changed between 1-ohm (parallel) and 4-ohm (series) by flipping a single switch, without any additional wiring. Integrated Deutsch/Amphenol connectors are moulded directly into the basket frame, providing error-proof plug-and-play connectivity for both the speaker signal and Color Optix RGB lighting. Conventional zinc nickel-plated marine grade brass spade terminals are also included as an alternative wiring option. The cone is injection-moulded mineral-filled polypropylene with UV inhibitors, co-moulded with a Santoprene VAST surround. Rockford Fosgate's patented VAST technique increases the effective radiating cone area by up to 25%. A linear synthetic fiber blend spider provides consistent excursion control. The vented motor design with a water-repelling nano-coated mesh screen allows heat dissipation at high output levels while protecting the motor from water ingress. The 100% UV stable ASA plastic frame and grille resist discolouration in marine environments. Optically clear UV stable RGB lighting encapsulation protects the LED PCB throughout. Compatible with both sealed and vented enclosure configurations. Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. Klippel Verified certification applied. Sold individually - one subwoofer per purchase. The black version is available as the M1D2-10B. Features & Benefits VersaSwitch - 1-Ohm or 4-Ohm Without Rewiring: The VersaSwitch allows the DVC 2-ohm voice coils to be configured to parallel (1-ohm) or series (4-ohm) by flipping a single switch. The 1-ohm setting maximises output from compatible mono amplifiers, while the 4-ohm setting suits amplifiers better matched to a higher impedance load. Compact 10 Inch Format - Space-Efficient Marine Bass: The M1D2-10 delivers M1 series Color Optix marine subwoofer performance in a 10 inch format with a 4.23 inch mounting depth and 8.90 inch cutout diameter, suited to under-seat compartments and vessels with limited enclosure space. Color Optix RGB LED Lighting - App Controlled: Ultra-bright wide-angle RGB LEDs are protected by optically clear UV stable encapsulation, controllable via the PMX-RGB controller and RF Connect app on iOS and Android. The PMX-RGB controller is sold separately. Integrated Deutsch/Amphenol Connectors - True Marine Ecosystem: Moulded in-frame Deutsch/Amphenol connectors combine speaker signal and Color Optix RGB lighting into a single error-proof plug-and-play connection. Zinc nickel-plated marine grade brass spade terminals are also included for standard wiring installations. Santoprene VAST Surround - UV and Salt-Fog Resistant: The Santoprene VAST surround is co-moulded to the mineral-filled polypropylene cone and attaches vertically using Rockford Fosgate's patented VAST technique, increasing the effective radiating cone area by up to 25% for more bass output from the same 10 inch driver. Vented Motor with Nano-Coated Water-Repelling Mesh Screen: The vented motor design allows heat to dissipate from the 2 inch (50mm) Kapton voice coil former at high output levels, while the nano-coated mesh screen prevents water from entering the motor assembly in spray-intensive marine environments. ASTM and ISO Tested - Purpose-Built Marine Construction: Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. IPX6 water intrusion rating confirms protection against powerful jets of water from any direction. Technical Specs Specification Detail SKU M1D2-10 Size 10 inch Colour White Voice Coil Type Dual Voice Coil (DVC) Nominal Impedance (each coil) 2 Ohm VersaSwitch Parallel 1 Ohm VersaSwitch Series 4 Ohm Power Handling 300W RMS / 1200W Peak SPL 91.5 dB (1W/1m) Frequency Response 20 Hz - 750 Hz Fs (Hz) 34 Vas (Litres) 44.2 Qts 0.44 Qes 0.47 Qms 7.80 Xmax 7.0mm Re (Ohms) 3.7 Le (mH) 2.22 Sd (cm2) 394.1 Woofer Displacement 0.10 cu.ft (2.80 Litres) Voice Coil Diameter 2 inch (50mm) Voice Coil Former High Temp Kapton Magnet Weight 47.70 oz (1.35kg) Cutout Diameter 8.90 inch (226mm) Mounting Depth 4.23 inch (107.4mm) Surround Santoprene VAST Spider Linear Synthetic Fiber Blend Motor Design Vented with Nano-Coated Water-Repelling Mesh Screen Frame 100% UV Stable ASA Plastic Speaker Connector Integrated Deutsch/Amphenol + Zinc Nickel-Plated Brass Spade Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Surround Technology VAST Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Individually (1 each) Certifications Klippel Verified Shipping Weight 3.9kg Warranty 2 Years Compatible With / Goes Well With The M1D2-10 is suited to marine watercraft, pontoon boats, ski boats, and any vessel requiring a compact 10 inch marine subwoofer with Color Optix lighting. The VersaSwitch enables pairing with amplifiers rated at 1-ohm or 4-ohm. Sold individually. The black version is available as the M1D2-10B. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M5-1000X1 - M5 series 1000W marine monoblock amplifier, capable of 750W at 1-ohm - well matched to the M1D2-10 at 1-ohm VersaSwitch setting M2-500X1 - M2 series 500W mono marine amplifier for a matched M2 ecosystem pairing M5-1500X5 - M5 series 1500W 5-channel marine amplifier for full system builds pairing the M1D2-10 with marine full-range speakers M1D2-10B - Black version of this subwoofer for colour-matched installations M1D2-12 - Larger M1 series 12 inch white DVC 2-ohm subwoofer for installations with more enclosure space Frequently Asked Questions What is the difference between the M1D2-10 and the M1D4-10? Both are white M1 series 10 inch Color Optix marine subwoofers with identical construction, power handling, and physical dimensions. The only difference is voice coil impedance. The M1D2-10 has DVC 2-ohm coils with VersaSwitch settings of 1-ohm (parallel) or 4-ohm (series). The M1D4-10 has DVC 4-ohm coils with VersaSwitch settings of 2-ohm (parallel) or 8-ohm (series). Choose the M1D2-10 for amplifiers that deliver maximum power at 1-ohm or 2-ohm loads; choose the M1D4-10 for amplifiers better suited to 2-ohm or 8-ohm impedance. What impedance settings does the VersaSwitch provide on the M1D2-10? The M1D2-10 uses DVC 2-ohm voice coils. The VersaSwitch configures the coils to parallel (1-ohm total) or series (4-ohm total) without any rewiring. Use the 1-ohm parallel setting when pairing with an amplifier rated for 1-ohm operation for maximum power output, or the 4-ohm series setting when your amplifier is better suited to a higher impedance load. What is the difference between the M1D2-10 and the M1D2-12? Both are white M1 series DVC 2-ohm Color Optix marine subwoofers with the same VersaSwitch settings (1-ohm parallel / 4-ohm series), power handling (300W RMS), and construction. The M1D2-10 is the 10 inch version with a shallower 4.23 inch mounting depth and smaller enclosure requirements. The M1D2-12 is the 12 inch version with deeper mounting depth and a lower Fs of 26Hz for deeper bass extension. Choose the M1D2-10 where space is limited; choose the M1D2-12 for maximum bass depth. Is the M1D2-10 sold as a single unit or as a pair? The M1D2-10 is sold individually - one subwoofer per purchase. Two units will need to be added to the order if a dual subwoofer installation is required. Does the M1D2-10 come in a black version? Yes. The black version is available as the M1D2-10B, sharing the same specifications and construction.

Read more less

Rockford Fosgate M1-65 M1 Series 6.5 Inch 2-Way Color Optix Marine Speakers in White - Pair A pair of marine grade 6.5 inch 2-way coaxial speakers in white with Color Optix RGB LED lighting, 75W RMS handling, and 90dB sensitivity. Features a Santoprene VAST surround, co-moulded mineral-filled polypropylene cone, grille-integrated 1 inch LCP balanced dome tweeter, fully sealed 6dB/octave ICC crossover, and integrated Deutsch/Amphenol plug-and-play connectors. IPX6 rated and ASTM B117 and G154 tested. Sold as a pair. Backed by a 2 year warranty. Product Overview The Rockford Fosgate M1-65 is a pair of M1 series 6.5 inch 2-way coaxial marine speakers in white, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). The M1 series sits between the M0 entry-level range and the premium M2 series, adding Color Optix lighting, Deutsch/Amphenol integrated connectors, and ASTM and ISO-tested marine construction to the core M0 driver platform in a compact 6.5 inch format. Bass and midrange reproduction is handled by an injection-moulded mineral-filled polypropylene cone body with a co-moulded Santoprene VAST surround. Rockford Fosgate's patented VAST (Vertical Attach Surround Technique) increases the effective radiating cone area by up to 25%, delivering more output from the same 6.5 inch footprint. A linear synthetic fiber blend spider provides consistent excursion control. The fully sealed ICC (Integrated Concealed Crossover) 6dB/octave high-pass network is hidden inside the basket, crossing over to a grille-integrated 1 inch (25.4mm) LCP balanced dome tweeter for high-frequency response up to 22kHz. The sealed motor design protects the motor assembly from water and debris. Integrated Deutsch RGB and speaker receptacles combine Color Optix lighting and audio signal into a single plug-and-play connection. Optically clear UV stable RGB lighting encapsulation protects the LED PCB. Ultra-bright wide-angle tri-colour surface mount LEDs with flat mould lenses deliver the Color Optix illumination. The frame is constructed from 100% UV stable ASA plastic and tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. IPX6 water intrusion rating and zinc nickel-plated marine grade brass connection terminals complete the marine-grade build. Stainless steel mounting hardware is included. The black version is available as the M1-65B. Klippel Verified certification is applied throughout. Features & Benefits Color Optix RGB LED Lighting - App Controlled: Ultra-bright wide-angle tri-colour surface mount LEDs with flat mould lenses are protected by optically clear UV stable RGB encapsulation and driven via a multiplexed RGB input. Lighting is controllable via the PMX-RGB controller and RF Connect app on iOS and Android. The PMX-RGB controller is sold separately. Santoprene VAST Surround - UV and Salt-Fog Resistant: The Santoprene VAST surround is co-moulded to the mineral-filled polypropylene cone body and attaches vertically using Rockford Fosgate's patented VAST technique, increasing the effective radiating cone area by up to 25% for more low and midrange output from the same 6.5 inch driver. Grille-Integrated 1 Inch LCP Balanced Dome Tweeter: The 1 inch (25.4mm) LCP balanced dome tweeter is integrated directly into the grille for a clean, pod-free appearance, delivering high-frequency response across the 38Hz-22kHz range with smooth roll-off characteristics. Fully Sealed ICC 6dB/Octave Crossover: The Integrated Concealed Crossover is fully sealed and hidden inside the basket, simplifying installation and protecting the crossover components from environmental exposure. Integrated Deutsch/Amphenol Connectors - True Marine Ecosystem: Integrated Deutsch RGB and speaker receptacles provide error-proof plug-and-play connectivity for both the audio signal and Color Optix lighting through a single connection point, compatible with the Rockford Fosgate True Marine Ecosystem. ASTM and ISO Tested - Marine Environment Compliance: Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. IPX6 water intrusion rating confirms protection against powerful jets of water from any direction. 90dB Sensitivity - Efficient Output for Smaller Installations: At 90dB sensitivity (1W/1m), the M1-65 is well suited to installations where amplifier power is moderate, while delivering clear, accurate sound in a compact 6.5 inch footprint suited to smaller vessel mounting positions. Technical Specs Specification Detail SKU M1-65 Speaker Type 2-Way Coaxial Speaker Size 6.5 inch Colour White Nominal Impedance 4 Ohm Power Handling 75W RMS / 300W Peak Sensitivity 90 dB (1W/1m) / 92 dB (2.83V/1m) Frequency Response 38 Hz - 22 kHz Tweeter 1 inch (25.4mm) LCP Balanced Dome (Grille-Integrated) Woofer Voice Coil Former 1 inch (25mm) High Temp Kapton Cone Co-Moulded Mineral-Filled Polypropylene Surround Santoprene VAST (UV and Salt-Fog Resistant) Spider Linear Synthetic Fiber Blend Motor Design Sealed Frame 100% UV Stable ASA Plastic Crossover ICC 6dB/Octave High-Pass (Fully Sealed) Surround Technology VAST LED Type Ultra-Bright Wide-Angle Tri-Colour SMD with Flat Mould Lenses LED Encapsulation Optically Clear UV Stable RGB Input Multiplexed Speaker Connector Integrated Deutsch/Amphenol + Zinc Nickel-Plated Brass Spade Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Mounting Hardware Stainless Steel (included) Grille / Trim Ring Included Midrange Mounting Depth 2.49 inch (63.18mm) Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Pair (2 each) Certifications Klippel Verified Shipping Weight 2.16kg (pair) Warranty 2 Years Compatible With / Goes Well With The M1-65 is suited to marine watercraft, pontoon boats, ski boats, and any vessel requiring a compact 6.5 inch marine speaker with Color Optix lighting. Its smaller footprint and shallower 2.49 inch mounting depth make it well suited to installations with limited panel depth. The black version is available as the M1-65B. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M2-300X4 - M2 series 300W 4-channel marine amplifier for powering the M1-65 pair at higher output levels M2-200X2 - M2 series 200W 2-channel marine amplifier for compact 2-channel builds PMX-1 - Rockford Fosgate Punch marine media receiver for direct-drive installations at 25W x 4 M1-65B - Black version of these speakers for colour-matched installations M1-8 - Larger M1 series 8 inch white marine speaker for installations where a bigger driver format is preferred Frequently Asked Questions What is the difference between the M1-65 and the M1-8? Both are white M1 series Color Optix marine speakers with the same construction, ASTM testing, Deutsch connectors, and 6dB/octave ICC crossover. The M1-8 is an 8 inch driver handling 150W RMS with a 3.3 inch mounting depth, suited to larger panel positions. The M1-65 is a 6.5 inch driver handling 75W RMS with a shallower 2.49 inch mounting depth, better suited to smaller vessels or installation locations with limited space behind the mounting surface. Choose based on available mounting position size and depth. What is the difference between the M1-65 and the M0-65? The M0-65 is the entry-level white 6.5 inch marine speaker without Color Optix lighting and without Deutsch/Amphenol connectors or ASTM and ISO testing. The M1-65 adds Color Optix RGB illumination, integrated Deutsch RGB and speaker receptacles for True Marine Ecosystem connectivity, and ASTM B117, G154, and ISO60068-2-64 test certifications. Both handle 65-75W RMS and share a similar driver platform. Choose the M0-65 for a clean, no-frills marine speaker; choose the M1-65 for Color Optix lighting and plug-and-play ecosystem integration. Does the Color Optix lighting require a separate controller? Yes. Color Optix RGB lighting requires the PMX-RGB controller and the RF Connect app (available on iOS and Android) to access full colour control, effects, and brightness adjustment. The PMX-RGB controller is sold separately and is not included. The speakers can operate without the controller at a fixed default colour setting straight out of the box. Is the M1-65 suitable for saltwater marine environments? Yes. The M1-65 is tested to ASTM B117 (500-hour salt/fog) and ASTM G154 (500-hour accelerated UV) standards, with IPX6 water intrusion rating, UV stable ASA frame, sealed motor design, and zinc nickel-plated marine grade brass terminals. It is designed for both freshwater and saltwater marine environments. What is the mounting depth required for the M1-65? The M1-65 requires a mounting depth of 2.49 inches (63.18mm). Measure the available depth behind the mounting surface before purchasing to confirm the speaker will fit without interference from hull structure or wiring.

Read more less

Rockford Fosgate M1-6 M1 Series 6 Inch 2-Way Color Optix Marine Speakers in White - Pair A pair of marine grade 6 inch 2-way coaxial speakers in white with Color Optix RGB LED lighting, 75W RMS handling, and 89dB sensitivity. Features a Santoprene VAST surround, co-moulded mineral-filled polypropylene cone, grille-integrated 1 inch LCP balanced dome tweeter, fully sealed 6dB/octave ICC crossover, and integrated Deutsch/Amphenol plug-and-play connectors. IPX6 rated and ASTM B117 and G154 tested. Sold as a pair. Backed by a 2 year warranty. Product Overview The Rockford Fosgate M1-6 is a pair of M1 series 6 inch 2-way coaxial marine speakers in white, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). The M1 series sits between the M0 entry-level range and the premium M2 series, adding Color Optix lighting, Deutsch/Amphenol integrated connectors, and ASTM and ISO-tested marine construction in Rockford Fosgate's most compact full-range marine speaker format. Bass and midrange reproduction is handled by an injection-moulded mineral-filled polypropylene cone body with a co-moulded Santoprene VAST surround. Rockford Fosgate's patented VAST (Vertical Attach Surround Technique) increases the effective radiating cone area by up to 25%, delivering more output from the same 6 inch footprint. A linear synthetic fiber blend spider provides consistent excursion control. The fully sealed ICC (Integrated Concealed Crossover) 6dB/octave high-pass network is hidden inside the basket, crossing over to a grille-integrated 1 inch (25.4mm) LCP balanced dome tweeter for high-frequency response up to 22kHz. The sealed motor design protects the motor assembly from water and debris. Integrated Deutsch RGB and speaker receptacles combine Color Optix lighting and audio signal into a single plug-and-play connection. Optically clear UV stable RGB lighting encapsulation protects the LED PCB. Ultra-bright wide-angle tri-colour surface mount LEDs with flat mould lenses deliver the Color Optix illumination. The frame is constructed from 100% UV stable ASA plastic and tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. IPX6 water intrusion rating and zinc nickel-plated marine grade brass connection terminals complete the marine-grade build. Stainless steel mounting hardware is included. Klippel Verified certification is applied throughout. Features & Benefits Color Optix RGB LED Lighting - App Controlled: Ultra-bright wide-angle tri-colour surface mount LEDs with flat mould lenses are protected by optically clear UV stable RGB encapsulation and driven via a multiplexed RGB input. Lighting is controllable via the PMX-RGB controller and RF Connect app on iOS and Android. The PMX-RGB controller is sold separately. Santoprene VAST Surround - UV and Salt-Fog Resistant: The Santoprene VAST surround is co-moulded to the mineral-filled polypropylene cone body and attaches vertically using Rockford Fosgate's patented VAST technique, increasing the effective radiating cone area by up to 25% for more low and midrange output from the same 6 inch driver. Grille-Integrated 1 Inch LCP Balanced Dome Tweeter: The 1 inch (25.4mm) LCP balanced dome tweeter is integrated directly into the grille for a clean, pod-free appearance, delivering high-frequency response across the 42Hz-22kHz range with smooth roll-off characteristics. Fully Sealed ICC 6dB/Octave Crossover: The Integrated Concealed Crossover is fully sealed and hidden inside the basket, simplifying installation and protecting the crossover components from environmental exposure. Integrated Deutsch/Amphenol Connectors - True Marine Ecosystem: Integrated Deutsch RGB and speaker receptacles provide error-proof plug-and-play connectivity for both the audio signal and Color Optix lighting through a single connection point, compatible with the Rockford Fosgate True Marine Ecosystem. ASTM and ISO Tested - Marine Environment Compliance: Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. IPX6 water intrusion rating confirms protection against powerful jets of water from any direction. Compact 6 Inch Format - Suited to Space-Constrained Positions: The M1-6 is Rockford Fosgate's most compact M1 series marine speaker, with a 6 inch cone and 2.52 inch mounting depth, making it well suited to smaller vessels and mounting positions where the M1-65 or M1-8 cannot physically fit. Technical Specs Specification Detail SKU M1-6 Speaker Type 2-Way Coaxial Speaker Size 6 inch Colour White Nominal Impedance 4 Ohm Power Handling 75W RMS / 300W Peak Sensitivity 89 dB (1W/1m) / 89.5 dB (2.83V/1m) Frequency Response 42 Hz - 22 kHz Tweeter 1 inch (25.4mm) LCP Balanced Dome (Grille-Integrated) Woofer Voice Coil Former 1 inch (25mm) High Temp Kapton Cone Co-Moulded Mineral-Filled Polypropylene Surround Santoprene VAST (UV and Salt-Fog Resistant) Spider Linear Synthetic Fiber Blend Motor Design Sealed Frame 100% UV Stable ASA Plastic Crossover ICC 6dB/Octave High-Pass (Fully Sealed) Surround Technology VAST LED Type Ultra-Bright Wide-Angle Tri-Colour SMD with Flat Mould Lenses LED Encapsulation Optically Clear UV Stable RGB Input Multiplexed Speaker Connector Integrated Deutsch/Amphenol + Zinc Nickel-Plated Brass Spade Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Mounting Hardware Stainless Steel (included) Grille / Trim Ring Included Midrange Mounting Depth 2.52 inch (63.9mm) Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Pair (2 each) Certifications Klippel Verified Shipping Weight 1.05kg (pair) Warranty 2 Years Compatible With / Goes Well With The M1-6 is suited to marine watercraft, pontoon boats, ski boats, and any vessel requiring a compact 6 inch marine speaker with Color Optix lighting. Its 2.52 inch mounting depth and smaller 6 inch footprint make it the best-fit choice for tight mounting positions where the M1-65 or M1-8 may not suit. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M2-300X4 - M2 series 300W 4-channel marine amplifier for powering the M1-6 pair at higher output levels M2-200X2 - M2 series 200W 2-channel marine amplifier for compact 2-channel builds PMX-1 - Rockford Fosgate Punch marine media receiver for direct-drive installations at 25W x 4 M1-65 - Larger M1 series 6.5 inch white marine speaker for installations with more panel space available M1-8 - Larger M1 series 8 inch white marine speaker for installations requiring a bigger driver format Frequently Asked Questions What is the difference between the M1-6 and the M1-65? Both are white M1 series Color Optix marine speakers with identical construction, ASTM testing, Deutsch connectors, and 6dB/octave ICC crossover. The M1-6 is a 6 inch driver with a 42Hz-22kHz frequency response and 89dB sensitivity, while the M1-65 is a 6.5 inch driver with a slightly wider 38Hz-22kHz frequency response and marginally higher 90dB sensitivity. The M1-6 is the better choice where the smaller 6 inch cutout or shallower mounting position is the deciding factor; the M1-65 delivers slightly more bass extension and output efficiency where space permits. Does the Color Optix lighting require a separate controller? Yes. Color Optix RGB lighting requires the PMX-RGB controller and the RF Connect app (available on iOS and Android) to access full colour control, effects, and brightness adjustment. The PMX-RGB controller is sold separately and is not included. The speakers can operate without the controller at a fixed default colour setting straight out of the box. Is the M1-6 suitable for saltwater marine environments? Yes. The M1-6 is tested to ASTM B117 (500-hour salt/fog) and ASTM G154 (500-hour accelerated UV) standards, with IPX6 water intrusion rating, UV stable ASA frame, sealed motor design, and zinc nickel-plated marine grade brass terminals. It is designed for both freshwater and saltwater marine environments. What is the mounting depth required for the M1-6? The M1-6 requires a mounting depth of 2.52 inches (63.9mm). Measure the available depth behind the mounting surface before purchasing to confirm the speaker will fit without interference from hull structure or wiring. What is the difference between the M1-6 and the M0-65? The M0-65 is the entry-level white 6.5 inch marine speaker without Color Optix lighting, without Deutsch/Amphenol connectors, and without ASTM and ISO test certifications. The M1-6 adds Color Optix RGB illumination, Deutsch/Amphenol plug-and-play connectivity, and full ASTM and ISO-tested marine compliance in a slightly smaller 6 inch format. Choose the M0-65 for a no-frills 6.5 inch marine speaker at a lower price point; choose the M1-6 for Color Optix lighting and True Marine Ecosystem integration in a compact 6 inch size.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" P3 4-Ohm DVC Subwoofer 500W RMS, Anodised Aluminium Cone, VAST, Dual Spider, FlexFit Basket, Extended Pole Piece. Product Overview The Rockford Fosgate Punch P3D4-10 is a 10" 4-Ohm Dual Voice Coil (DVC) subwoofer rated at 500W RMS the 4-Ohm variant of the P3 10" platform. Identical construction to the P3D2-10 with the sole difference being 4-Ohm voice coil impedance per coil, providing wiring options of 2-Ohm (parallel), 8-Ohm (series), or 4-Ohm per coil for bi-amplification no 1-Ohm stability requirement. Optimised for sealed and vented enclosures. Sold as an individual unit. The P3 series introduces the anodised aluminium cone and dustcap of the P3 platform the same premium cone material as the P3D2-10. Full confirmed specifications (sensitivity, Fs, Xmax, enclosure volumes) are not provided in the supplier data for this SKU confirm from the official Rockford Fosgate P3D4-10 datasheet. Physical dimensions on the same 10" P3 platform should be consistent with the P3D2-10 (232mm cutout, 156.8mm mounting depth) but must be independently confirmed before publishing. Key Specifications Subwoofer size: 10 inch Voice coil configuration: Dual Voice Coil (DVC) Impedance: 4-Ohm per coil (2-Ohm parallel / 8-Ohm series / 4-Ohm biamp) Power handling (RMS): 500W (confirmed) Power handling (peak): Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate (P3D2-10: 82dB) Fs: Not specified — confirm with Rockford Fosgate (P3D2-10: 26.6Hz) Xmax: Not specified — confirm with Rockford Fosgate (P3D2-10: 15.2mm) Cutout diameter: Not specified for this SKU — confirm with Rockford Fosgate (P3D2-10: 232mm) Mounting depth: Not specified for this SKU — confirm with Rockford Fosgate (P3D2-10: 156.8mm) Voice coil diameter: Not specified — confirm with Rockford Fosgate Cone: Anodised aluminium ✓ Dustcap: Anodised aluminium ✓ Voice coil: High-temp, Nomex® reinforcement collar ✓ Spider: Dual linear with embedded 16 AWG tinsel leads ✓ Basket: Hybrid StampCast, FlexFit, with integrated spider venting ✓ Pole piece: Extended ✓ Backplate: Bumped and vented ✓ Input terminals: Features: push — confirmed compression on P3D2-10 spec table Trim ring: Diamond-cut cast aluminium (grille insert compatible) ✓ Magnet cover: Protective PVC textured ✓ Enclosure compatibility: Sealed and vented ✓ CEA-2031 compliant: Not confirmed for this SKU — confirm with Rockford Fosgate Sealed enclosure volume: Not specified for this SKU — confirm with Rockford Fosgate Vented enclosure volume: Not specified for this SKU — confirm with Rockford Fosgate Sold as: Individual unit Warranty: Confirmed (authorised dealer) — terms TBC Features & Benefits 4-Ohm DVC — Broad Amplifier Compatibility: 2-Ohm (parallel): Most common configuration 8-Ohm (series): For amplifiers with higher minimum impedance 4-Ohm per coil (biamp): Each coil to a separate amplifier channel 500W RMS — Confirmed 500W RMS — the highest power handling in the Punch series catalogue. Anodised Aluminium Cone and Dustcap — Aluminium's rigidity resists cone breakup at high excursion. Anodising hardens the surface and provides heat conduction from the voice coil. See the P3D2-10 listing for a full explanation of the P3 cone upgrade. Dual Linear Spider — Two spiders for improved suspension compliance and cone control at high excursion levels. VAST — Up to 25% increased effective cone area at the same basket diameter. Hybrid StampCast Basket with FlexFit — Combined rigidity and reduced resonance; FlexFit for non-standard mounting cavity profiles. Nomex® Voice Coil Collar — Thermal and mechanical reinforcement at the voice coil junction — essential for sustained 500W operation. Extended Pole Piece and Bumped Vented Backplate — Extended pole for increased Xmax; vented backplate eliminates air spring compression. Diamond-Cut Cast Aluminium Trim Ring — Premium machined aluminium with grille insert provision. Rubberised Over-Mould — Grip feature on the basket for handling during installation. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P3D4-10 Series Punch P3 Subwoofer Size 10 inch Voice Coil Dual Voice Coil (DVC) Impedance per Coil 4-Ohm ✓ Wiring Options 2-Ohm (parallel) / 8-Ohm (series) / 4-Ohm biamp ✓ Power Handling (RMS) 500W ✓ Peak Power Not confirmed — confirm with Rockford Fosgate Sensitivity Not confirmed — confirm with Rockford Fosgate Fs / Xmax / Qts Not confirmed — confirm with Rockford Fosgate Cutout Diameter Not confirmed — confirm with Rockford Fosgate Mounting Depth Not confirmed — confirm with Rockford Fosgate Sealed Enclosure Vol. Not confirmed — confirm with Rockford Fosgate Vented Enclosure Vol. Not confirmed — confirm with Rockford Fosgate Cone Anodised Aluminium ✓ Dustcap Anodised Aluminium ✓ Voice Coil High-Temp, Nomex® Collar ✓ Spider Dual Linear, Embedded 16 AWG Tinsel Leads ✓ Basket Hybrid StampCast, FlexFit, Spider Venting ✓ Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals Features: push — confirmed compression on P3D2-10 spec Trim Ring Diamond-Cut Cast Aluminium (Grille Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ CEA-2031 Compliant Not confirmed for this SKU Sold As Individual Unit Warranty Confirmed (authorised dealer) — terms TBC Compatible With / Goes Well With Suitable enclosure types: Sealed and vented — both confirmed Wiring: 2-Ohm → parallel 8-Ohm → series 4-Ohm per coil → biamp Pairs well with: Rockford Fosgate T1500-1BDCP or T2500-1BDCP — confirm RMS output at 2-Ohm matches 500W Frequently Asked Questions What is the difference between P3D4-10 and P3D2-10? Both are identical 10" Punch P3 subwoofers at 500W RMS with the same aluminium cone construction. The sole difference is impedance: P3D4-10 is 4-Ohm per coil (2-Ohm parallel / 8-Ohm series), P3D2-10 is 2-Ohm per coil (1-Ohm parallel / 4-Ohm series). The 4-Ohm DVC avoids the 1-Ohm parallel requirement, providing broader amplifier compatibility. What enclosure size does the P3D4-10 require? Full specifications are not provided for the P3D4-10 in the supplier data. Based on the P3D2-10 (same 10" P3 platform): sealed 16.7L / 0.59 cu ft; vented 39.6L / 1.4 cu ft. Confirm with Rockford Fosgate that these volumes apply to the P3D4-10 before building or selecting an enclosure. What amplifier power is appropriate? 500W RMS at the selected impedance — 2-Ohm (parallel) or 4-Ohm (biamp). Confirm amplifier RMS output at the chosen load. Is a grille available? The diamond-cut cast aluminium trim ring accommodates an optional grille insert. Confirm the SKU with Rockford Fosgate. Does the P3D4-10 have the same aluminium cone as the P3D2-10? Yes — both use anodised aluminium cone and dustcap, the defining construction upgrade of the P3 series over the P1 and P2 Kevlar paper cones. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less