13" Power T2 Single 2-Ohm Subwoofer Glass Fibre/Aramid Honeycomb Sandwich Cone, 4" Edge-Wound Aluminium Voice Coil, Triple-Stack Ferrite Motor, IDHS, 8-AWG Terminals. Product Overview The Rockford Fosgate Power T2S2-13 is a 13" effective radiating area Single Voice Coil (SVC) subwoofer the 2-Ohm variant of the T2S1-13 platform. The construction is identical to the T2S1-13 with the sole difference being the 2-Ohm voice coil impedance, which provides broader amplifier compatibility than the 1-Ohm T2S1-13. All confirmed T2 platform construction applies: three-layer glass fibre/aramid honeycomb/glass fibre sandwich cone, aluminium dustcap, VAST injection-moulded foam surround with mechanical clamping ring, dual Nomex progressive spiders, die-cast aluminium frame with integrated heat sink fins, single-layer edge-wound aluminium 4" voice coil, triple-stack segmented ferrite motor, integrated aluminium IDHS shorting ring, vented pole piece, and 8-AWG push spring terminals. Key Specifications Effective radiating diameter: 13 inch (cone + surround) Physical basket diameter: Not confirmed — confirm with Rockford Fosgate Voice coil configuration: Single Voice Coil (SVC) Impedance: Title and SKU indicate 2-Ohm — description says 1-Ohm — confirm with Rockford Fosgate Power handling (RMS): Not stated  Voice coil: Single-layer edge-wound aluminium, 4" Cone: Three-layer glass fibre / aramid honeycomb / glass fibre sandwich Dustcap: Aluminium Surround: Injection-moulded VAST foam, proprietary mechanical clamping ring Spider: Dual Nomex progressive with integrated lead wires Frame: Die-cast aluminium with integrated heat sink fins Motor: Triple-stack segmented ferrite Shorting ring: Integrated aluminium IDHS Pole piece: Vented Input terminals: Custom push spring insulated 8-AWG Trim ring: Detachable die-cast aluminium Enclosure type: Not specified Sensitivity / Fs / Xmax / Qts: Not confirmed Mounting depth: Not confirmed Cutout diameter: Not confirmed Enclosure volume: Not confirmed Sold as: Individual unit Weight: 42.5 kg Warranty: Not confirmed Features & Benefits 13" Effective Radiating Area — Total effective piston area (cone plus surround). Physical basket and cutout dimensions must be confirmed from the official T2S2-13 datasheet. 2-Ohm SVC — Broader Amplifier Compatibility Than T2S1-13 — A 2-Ohm SVC is supported by a wider range of high-output mono amplifiers than the 1-Ohm T2S1-13, which requires amplifiers specifically rated stable at 1-Ohm. Two T2S2-13 units in series = 4-Ohm; two in parallel = 1-Ohm (confirm amplifier stability before using 1-Ohm parallel). Glass Fibre / Aramid Honeycomb / Glass Fibre Sandwich Cone — Aerospace-grade structural composite for maximum stiffness and minimum mass — identical construction to T2S1-13. 4" Edge-Wound Aluminium Voice Coil — Largest voice coil in the catalogue; flat-wound conductor for maximum BL product and thermal capacity. Triple-Stack Segmented Ferrite Motor — Deep, high-flux magnetic gap for the 4" voice coil; segmented construction reduces eddy current losses. IDHS Aluminium Shorting Ring — Dual-function: distortion reduction (inductance variation) and heat conduction through the frame's heat sink fins. Die-Cast Aluminium Frame with Integrated Heat Sink Fins — Direct thermal management from motor gap to air. Dual Nomex Progressive Spiders — Progressive compliance for controlled high-excursion operation. Proprietary Surround Mechanical Clamping Ring — Long-term surround durability under sustained large-amplitude movement. 8-AWG Push Spring Terminals — Heaviest gauge wiring in this catalogue. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T2S2-13 Series Power T2 Effective Radiating Area 13 inch ✓ Physical Basket Diameter Not confirmed Voice Coil Single Voice Coil (SVC) Impedance Title/SKU: 2-Ohm / Description: 1-Ohm — confirm with Rockford Fosgate Power Handling (RMS) Not confirmed Voice Coil Single-layer edge-wound aluminium 4" ✓ Cone Glass Fibre / Aramid Honeycomb / Glass Fibre Sandwich ✓ Dustcap Aluminium ✓ Surround VAST Injection-Moulded Foam + Mechanical Clamping Ring ✓ Spider Dual Nomex Progressive, Integrated Lead Wires ✓ Frame Die-Cast Aluminium + Integrated Heat Sink Fins ✓ Motor Triple-Stack Segmented Ferrite ✓ Shorting Ring Integrated Aluminium IDHS ✓ Pole Piece Vented ✓ Input Terminals Push Spring 8-AWG ✓ Trim Ring Detachable Die-Cast Aluminium ✓ Enclosure Type Not specified All Other Specs Not confirmed Sold As Individual Unit Warranty Not confirmed Weight 42.5 kg Frequently Asked Questions What is the impedance of the T2S2-13? The product title states 2-Ohm and the SKU designation "S2" indicates Single 2-Ohm. The product description text states "a single 1-ohm voice coil" — this appears to be copied from the T2S1-13 (1-Ohm) description without updating the impedance reference. Confirm the correct impedance with Rockford Fosgate before purchasing. What is the difference between T2S2-13 and T2S1-13? Assuming the T2S2-13 is the 2-Ohm variant as indicated by the title and SKU: both are identical 13" T2 subwoofers in construction. The T2S2-13's 2-Ohm impedance suits a broader range of mono amplifiers than the T2S1-13's 1-Ohm, which requires amplifiers specifically rated stable at 1-Ohm. What is the power handling? Not confirmed in the supplier data — same blocker as T2S1-13. Confirm from the official T2S2-13 datasheet. What enclosure is required? Enclosure type not specified. Confirm from the official T2S2-13 datasheet. What amplifier is appropriate? Amplifier guidance cannot be published until the impedance conflict is resolved and the RMS power is confirmed. Confirm both with Rockford Fosgate before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

13" Power T2 Single 1-Ohm Subwoofer Glass Fibre/Aramid Honeycomb Sandwich Cone, 4" Edge-Wound Aluminium Voice Coil, Triple-Stack Ferrite Motor, IDHS, 8-AWG Push Spring Terminals. Product Overview The Rockford Fosgate Power T2S1-13 is a 13" effective radiating area Single Voice Coil (SVC) subwoofer with a 1-Ohm impedance from the Power T2 series, designed from the ground up as a high-performance large-format driver. The "13 inches" designation describes the total effective radiating cone area, which includes both the cone and surround assembly the physical basket and cutout dimensions must be confirmed from the official Rockford Fosgate T2S1-13 datasheet. The T2S1-13 introduces several constructions not found elsewhere in this catalogue: a three-layer glass fibre/aramid honeycomb/glass fibre sandwich cone; a single-layer edge-wound aluminium 4" voice coil; a triple-stack segmented ferrite motor structure; a proprietary surround mechanical clamping ring; and 8-AWG custom push spring terminals the heaviest gauge wiring connection in any subwoofer in this batch. The die-cast aluminium frame has integrated heat sink fins and an integrated aluminium IDHS shorting ring. Key Specifications Effective radiating diameter: 13 inch (cone + surround combined) Physical basket diameter: Not confirmed — confirm with Rockford Fosgate Voice coil configuration: Single Voice Coil (SVC) Impedance: 1-Ohm Power handling (RMS): Not stated Voice coil: Single-layer edge-wound aluminium, 4" diameter Cone: Three-layer glass fibre / aramid honeycomb / glass fibre sandwich Dustcap: Aluminium Surround: Injection-moulded foam with VAST, proprietary mechanical clamping ring Spider: Dual Nomex progressive with integrated lead wires Frame: Die-cast aluminium with integrated heat sink fins Motor: Triple-stack segmented ferrite Shorting ring: Integrated aluminium IDHS Pole piece: Vented Input terminals: Custom push spring insulated 8-AWG Trim ring: Detachable die-cast aluminium Enclosure type: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Fs / Xmax / Qts: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Enclosure volume: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 13" Effective Radiating Area — The T2S1-13's 13" rating describes the total effective piston area (cone plus surround), rather than the conventional cone-only diameter measurement. This is a non-standard format — confirm the physical basket dimensions, cutout diameter, and mounting depth from the official Rockford Fosgate T2S1-13 datasheet before building an enclosure or purchasing a pre-built box. Glass Fibre / Aramid Honeycomb / Glass Fibre Sandwich Cone — A three-layer structural composite cone: glass fibre outer and inner skins provide rigidity, while an aramid honeycomb core (a grid structure of hexagonal cells made from aramid fibre) provides the shear stiffness to resist the out-of-plane forces that cause cone breakup. Aramid honeycomb is used in aerospace and motorsport structural panels. This construction produces a very stiff, low-mass cone for high-excursion bass reproduction. 4" Edge-Wound Aluminium Single Voice Coil — A 4" voice coil is the largest in any subwoofer in this catalogue. Edge-wound construction winds the aluminium conductor wire on its edge (flat-wound), maximising the amount of conductor per unit of axial winding height and increasing the voice coil's force factor (BL). This contributes to the motor's ability to drive the large cone assembly to high excursion levels. Triple-Stack Segmented Ferrite Motor — Three ferrite magnet plates stacked to produce a deep, high-flux magnetic gap suitable for the 4" voice coil. The segmented design uses separate magnet segments rather than a continuous ring — reducing eddy current losses. Ferrite rather than neodymium — selected for the thermal stability and deep magnetic gap appropriate to a sustained high-power, large-format application. Integrated Aluminium IDHS Shorting Ring — The aluminium cap on the pole piece serves dual functions: reducing voice coil inductance variation (distortion reduction) and conducting heat from the magnetic gap into the frame's heat sink fins. Die-Cast Aluminium Frame with Integrated Heat Sink Fins — Direct thermal conduction from the motor gap to the surrounding air through the aluminium frame's heat sink fins — critical for a driver of this power level. Dual Nomex Progressive Spiders — Two progressive-compliance spiders provide controlled suspension across a wide excursion range — the progressive spring rate increases stiffness as the cone approaches excursion limits, protecting the voice coil at high output levels. Proprietary Surround Mechanical Clamping Ring — A mechanical clamping ring is used to secure the surround at the basket edge — a physical fastening method rather than standard adhesive bonding, chosen for long-term durability under the mechanical stress of large-amplitude, high-power cone movement. 8-AWG Push Spring Terminals — The heaviest gauge input terminals in this catalogue — 8-AWG push spring type, accommodating very thick wiring appropriate for the expected high current demand at the T2S1-13's power level. VAST Foam Surround — Injection-moulded foam with VAST geometry for increased effective cone area. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T2S1-13 Series Power T2 Effective Radiating Area 13 inch (cone + surround) ✓ Physical Basket Diameter Not confirmed — confirm with Rockford Fosgate Voice Coil Single Voice Coil (SVC) Impedance 1-Ohm ✓ Power Handling (RMS) Not confirmed Voice Coil Size 4" edge-wound aluminium ✓ Cone Glass Fibre / Aramid Honeycomb / Glass Fibre Sandwich ✓ Dustcap Aluminium ✓ Surround Injection-Moulded VAST Foam, Mechanical Clamping Ring ✓ Spider Dual Nomex Progressive, Integrated Lead Wires ✓ Frame Die-Cast Aluminium with Integrated Heat Sink Fins ✓ Motor Triple-Stack Segmented Ferrite ✓ Shorting Ring Integrated Aluminium IDHS ✓ Pole Piece Vented ✓ Input Terminals Push Spring 8-AWG ✓ Trim Ring Detachable Die-Cast Aluminium ✓ Enclosure Type Not specified — confirm with Rockford Fosgate Sensitivity Not confirmed Fs / Xmax / Qts Not confirmed Mounting Depth Not confirmed Cutout Diameter Not confirmed Enclosure Volume Not confirmed Sold As Individual Unit Weight Not confirmed Warranty Not confirmed   Frequently Asked Questions What does "13 inches effective radiating area" mean? Unlike standard subwoofer diameter measurements (which typically measure the cone only), the T2S1-13's 13" measurement describes the total effective piston area — the combined diameter of both the cone and the surround that contributes to acoustic output. The physical basket is likely larger than 13". Confirm the actual basket diameter and cutout dimensions from the official Rockford Fosgate T2S1-13 datasheet. What is aramid honeycomb and why is it used in the cone? Aramid honeycomb is a grid of hexagonal cells made from aramid fibre (the same material as Kevlar). When sandwiched between glass fibre skins, the honeycomb core provides exceptional structural rigidity against the out-of-plane bending forces that cause cone breakup during high-excursion bass reproduction. The honeycomb structure achieves this with extremely low mass — a key property for a large cone that must move quickly and accurately. What is edge-wound voice coil construction? In a standard voice coil, round wire is wound in circular loops. In an edge-wound (flat-wound) design, the conductor is a flat ribbon wound on its edge — packing more conductor material per unit of winding height. This increases the voice coil's force factor (BL product) and power-handling capacity in the same coil height, contributing to the motor's ability to drive the large 13" cone assembly. What is the power handling of the T2S1-13? Power handling (RMS) is not stated in the supplier description or features list. Confirm from the official Rockford Fosgate T2S1-13 datasheet before purchasing any amplifier or publishing any power matching guidance. What enclosure does the T2S1-13 require? Enclosure type (sealed or vented) is not specified in the supplier data — unlike all other subwoofers in this batch. Confirm from the official Rockford Fosgate T2S1-13 datasheet before building or selecting an enclosure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1S2-12 Power 12" T1 Slim Single 2-Ohm Subwoofer T1 Performance, Shallow Depth Product Overview The Rockford Fosgate T1S2-12 is a 12" slimline single 2-ohm subwoofer from the flagship Power T1 series, rated at 600W RMS and 1200W peak. Engineered specifically for installations where traditional-depth subwoofers will not fit, the T1S2-12 is not a generic shallow driver it is a purpose-designed slimline subwoofer built to deliver near-identical performance characteristics to the full-depth Power T1 range, through a suite of patent-pending and proprietary technologies that are unique to the T1 slimline platform. At the heart of the T1S2-12 is a proprietary slotted voice coil assembly with interior and exterior windings that enables exceptional long-excursion travel from a reduced mounting depth addressing the fundamental challenge of shallow subwoofer design where limited cone excursion typically constrains bass output. A high-energy neodymium motor structure, proprietary split yoke pass-through motor technology, encapsulating voice coil-to-former coupling, integrated copper cap heat-sinking shorting ring (IDHS), dual Nomex progressive spiders with integrated lead wires, and a carbon fibre/PMI/glass fibre composite cone combine to produce a slimline driver engineered with the same rigour as the full-depth T1 range. Optimised for sealed enclosures. Detachable die-cast aluminium trim ring included; optional grille insert available separately. Key Specifications Driver size: 12" slimline Voice coil configuration: Single 2-ohm Power handling: 600W RMS / 1200W peak Motor structure: High-temp high-energy neodymium Voice coil: Dual wound 2.5" with interior and exterior windings (slotted assembly) Cone: Carbon fibre / PMI / glass fibre composite with aluminium dust cap Surround: Injection-moulded foam with VAST technology Spiders: Dual Nomex progressive with integrated lead wires Basket: Aluminium die-cast with integrated heat sink fins Shorting ring: Integrated copper cap heat-sinking (IDHS) Input terminals: Custom insulated push spring 10 AWG Pole piece: Vented Trim ring: Detachable die-cast aluminium (included) Grille: Optional grille insert (sold separately) Optimised for: Sealed enclosures Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Proprietary slotted voice coil assembly with interior/exterior windings (patent pending): The engineering core of the T1S2-12. The slotted assembly with dual winding configuration allows the voice coil to travel significantly further than a conventional shallow driver voice coil, generating the long excursion needed for deep, high-output bass from a reduced mounting depth. This is the key technology that separates the T1S2-12 from generic shallow subwoofers. Proprietary split yoke pass-through motor technology (patent pending): The split yoke design allows the motor structure to be configured in a way that enables greater excursion travel within a slimmer overall assembly depth. A fundamental motor architecture innovation that contributes directly to the T1S2-12's ability to match full-depth T1 performance characteristics. High-temp high-energy neodymium motor structure: Neodymium magnets produce a stronger magnetic field per unit mass than conventional ferrite magnets, enabling higher motor force (BL) in a more compact and lighter motor assembly critical for achieving T1-level sensitivity and power handling in a slimline format where magnet volume is constrained. Encapsulating voice coil-to-former coupling technology (patent pending): The voice coil is coupled to the former through an encapsulating process that increases the bonding surface area and strength, preventing delamination at the high excursion levels and sustained power inputs the T1S2-12 is designed to handle. Integrated copper cap heat-sinking shorting ring (IDHS): The copper shorting ring reduces inductance variation across the excursion range (improving linearity and reducing distortion) while simultaneously acting as a heat sink to draw thermal energy away from the voice coil gap directly contributing to sustained power handling reliability. Carbon fibre/PMI/glass fibre composite cone with aluminium dust cap: A multi-material composite cone significantly stiffer and lighter than conventional paper or polypropylene cones, maintaining pistonic accuracy at the high excursion levels the slotted voice coil assembly enables. PMI (polymethacrylimide) foam core adds internal damping to suppress cone resonances. Injection-moulded foam surround with VAST technology: VAST (Vertical Attach Surround Technique) reclaims cone surface area at the surround attachment, and the injection-moulded foam surround provides consistent, repeatable excursion compliance across the full travel range more precise than rubber or cloth surrounds at high excursion levels. Dual Nomex progressive spiders with integrated lead wires: Dual progressive spiders provide linear restoring force symmetry across the extended excursion range the slotted voice coil enables. Integrated lead wires eliminate the traditional separate tinsel lead removing a common failure point in high-excursion slimline drivers. Aluminium die-cast basket with integrated heat sink fins: The basket fins actively dissipate heat from the motor assembly during sustained high-power use a thermal management feature particularly important in compact, sealed enclosure environments where heat accumulates more rapidly than in larger enclosure volumes. Single 2-ohm voice coil simplified wiring: Single voice coil eliminates dual-coil wiring complexity, presenting a direct 2-ohm load to the amplifier. Straightforward pairing with any 2-ohm stable mono amplifier without impedance configuration decisions. Vented pole piece: Air channels through the pole piece reduce thermal compression and back-pressure behind the cone at high excursion levels, improving linearity and power handling consistency. Custom insulated push spring 10 AWG terminals: Appropriate for the current demands of a 600W RMS, 2-ohm system. Push-spring design allows fast, clean wiring without tools. Optimised for sealed enclosures: Rockford Fosgate has specifically tuned the T1S2-12 for sealed enclosure use, ensuring the driver's compliance and Qts parameters produce the intended bass response in a sealed alignment confirm recommended enclosure volume with Rockford Fosgate documentation before building. Detachable die-cast aluminium trim ring included: Provides a clean, finished appearance at the installation cutout. The detachable design allows removal for bare-driver installation where a trim ring is not required. Optional grille insert available separately: Grille protection is available for installations where driver exposure is a concern confirm compatible part number with your supplier. Technical Specs Specification Detail SKU T1S2-12 Brand Rockford Fosgate Driver Size 12" slimline Voice Coil Configuration Single 2-ohm Power Handling 600W RMS / 1200W peak Motor Structure High-temp high-energy neodymium Voice Coil Dual wound 2.5"; interior and exterior windings (slotted assembly) Voice Coil Coupling Encapsulating voice coil-to-former technology (patent pending) Motor Technology Proprietary split yoke pass-through (patent pending) Cone Carbon fibre / PMI / glass fibre composite Dust Cap Aluminium Surround Injection-moulded foam with VAST technology Spiders Dual Nomex progressive with integrated lead wires Basket Aluminium die-cast with integrated heat sink fins Shorting Ring Integrated copper cap heat-sinking (IDHS) Pole Piece Vented Input Terminals Custom insulated push spring 10 AWG Trim Ring Detachable die-cast aluminium (included) Grille Optional insert (sold separately) Enclosure Optimisation Sealed Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Mono amplifiers stable at 2 ohms, rated at or near 600W RMS Rockford Fosgate Power T1 and T2 series mono amplifiers Custom sealed enclosures designed for the T1S2-12 confirm recommended enclosure volume with Rockford Fosgate documentation before building Vehicles where traditional-depth subwoofers will not fit: behind-seat ute and truck installations, shallow boot floor vehicles, and custom fabrication builds with depth constraints Rockford Fosgate T1S-1X12 slim sealed loaded enclosure (purpose-built enclosure for the T1 slim driver range) Rockford Fosgate 10 AWG and heavy-gauge wiring kits for 2-ohm mono amplifier installation Rockford Fosgate RCA cables and signal processors Frequently Asked Questions How does the T1S2-12 achieve T1-level performance in a slimline format? The T1S2-12 uses a proprietary slotted voice coil assembly with interior and exterior windings (patent pending) that enables long excursion travel from a reduced mounting depth the key constraint of conventional shallow drivers. Combined with the split yoke pass-through motor technology (patent pending), neodymium motor structure, and encapsulating voice coil coupling, the T1S2-12 is engineered to deliver near-identical performance to traditional-depth T1 subwoofers from a significantly shallower installation profile. What impedance does the T1S2-12 present to the amplifier? The T1S2-12 is a single 2-ohm voice coil driver, presenting a direct 2-ohm load to the amplifier. No wiring configuration is required connect a 2-ohm stable mono amplifier rated at or near 600W RMS and go. Is the T1S2-12 suitable for the Rockford Fosgate T1S-1X12 loaded enclosure? The T1S-1X12 is a purpose-built slim sealed loaded enclosure from Rockford Fosgate that houses a T1 slim driver. Confirm with your supplier whether the T1S2-12 is the specific driver variant installed in the T1S-1X12 or whether it is compatible as a replacement driver before purchasing. What enclosure type is the T1S2-12 optimised for? The T1S2-12 is specifically optimised for sealed enclosures. Rockford Fosgate has tuned the driver's parameters for sealed alignment confirm recommended enclosure volume with official Rockford Fosgate documentation or a qualified installer before designing or building an enclosure. Is a grille included with the T1S2-12? No. The T1S2-12 ships with a detachable die-cast aluminium trim ring only. An optional grille insert is available separately confirm the compatible part number with your supplier before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1S1-12 Power 12" T1 Slim Single 1-Ohm Subwoofer T1 Performance, Shallow Depth, 1-Ohm Ready Product Overview The Rockford Fosgate T1S1-12 is a 12" slimline single 1-ohm subwoofer from the flagship Power T1 series, rated at 600W RMS and 1200W peak. The 1-ohm stable counterpart to the T1S2-12, it carries the complete T1 slimline technology stack in a single 1-ohm voice coil configuration presenting a direct 1-ohm load to the amplifier for maximum power extraction from 1-ohm stable mono amplifiers without any wiring configuration required. Like the T1S2-12, the T1S1-12 is purpose-engineered to deliver near-identical performance characteristics to the full-depth Power T1 range from a significantly shallower mounting depth, through the same suite of proprietary and patent-pending technologies: the slotted voice coil assembly with interior and exterior windings enabling long excursion travel, the split yoke pass-through motor technology, high-energy neodymium motor structure, encapsulating voice coil-to-former coupling, integrated copper cap heat-sinking shorting ring (IDHS), dual Nomex progressive spiders with integrated lead wires, and carbon fibre/PMI/glass fibre composite cone. Optimised for sealed enclosures. Detachable die-cast aluminium trim ring included; optional grille insert available separately. Key Specifications Driver size: 12" slimline Voice coil configuration: Single 1-ohm Power handling: 600W RMS / 1200W peak Motor structure: High-temp high-energy neodymium Voice coil: Dual wound 2.5"; interior and exterior windings (slotted assembly) Cone: Carbon fibre / PMI / glass fibre composite with aluminium dust cap Surround: Injection-moulded foam with VAST technology Spiders: Dual Nomex progressive with integrated lead wires Basket: Aluminium die-cast with integrated heat sink fins Shorting ring: Integrated copper cap heat-sinking (IDHS) Input terminals: Custom insulated push spring 10 AWG Pole piece: Vented Trim ring: Detachable die-cast aluminium (included) Grille: Optional insert (sold separately) Optimised for: Sealed enclosures Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Single 1-ohm voice coil direct 1-ohm load, zero wiring complexity: The defining differentiator from the T1S2-12. A single 1-ohm voice coil presents a direct 1-ohm load to any 1-ohm stable mono amplifier no parallel or series wiring decisions, no configuration required. The most direct path to maximum power output from a 1-ohm stable amplifier in a slimline 12" T1 driver. Proprietary slotted voice coil assembly with interior/exterior windings (patent pending): Enables long excursion travel from a reduced mounting depth the fundamental engineering challenge of slimline subwoofer design. The slotted assembly with dual winding configuration allows the voice coil to travel significantly further than a conventional shallow driver, generating the displacement needed for deep, high-output bass from a slim installation profile. Proprietary split yoke pass-through motor technology (patent pending): A motor architecture innovation that enables greater excursion travel within a slimmer overall assembly depth, working in combination with the slotted voice coil to produce T1-level bass performance from a shallow driver. High-temp high-energy neodymium motor structure: Neodymium magnets produce significantly stronger magnetic fields per unit mass than conventional ferrite magnets, enabling high motor force (BL) in the compact, lightweight motor assembly required for a slimline design delivering the sensitivity and power handling of a T1 driver from a reduced physical footprint. Encapsulating voice coil-to-former coupling technology (patent pending): Increases bonding surface area and strength between the voice coil and former, preventing delamination at the high excursion levels and sustained 600W RMS input the T1S1-12 is designed for. Integrated copper cap heat-sinking shorting ring (IDHS): Simultaneously reduces inductance variation across the excursion range (improving linearity and reducing distortion) and draws thermal energy away from the voice coil gap essential for sustained 600W RMS reliability in compact, sealed enclosure environments where heat accumulates rapidly. Carbon fibre/PMI/glass fibre composite cone with aluminium dust cap: A stiff, lightweight multi-material composite significantly stiffer than paper or polypropylene cones, maintaining pistonic accuracy across the extended excursion range the slotted assembly enables. PMI foam core adds internal damping to suppress cone resonances. Injection-moulded foam surround with VAST technology: VAST reclaims cone surface area at the surround attachment, maximising effective piston area in the 12" slimline format. The injection-moulded foam surround provides consistent, repeatable compliance across the full travel range. Dual Nomex progressive spiders with integrated lead wires: Dual progressive spiders provide linear restoring force symmetry across the extended excursion range. Integrated lead wires eliminate the traditional separate tinsel lead removing a common high-excursion failure point that is particularly critical in a slimline driver designed for long voice coil travel. Aluminium die-cast basket with integrated heat sink fins: The basket fins actively dissipate heat from the motor assembly during sustained high-power use a thermal management feature particularly important in compact sealed enclosure installations where back-panel heat accumulation is a reliability concern. Vented pole piece: Air channels through the pole piece reduce thermal compression and back-pressure behind the cone at high excursion levels, improving linearity and power handling consistency in sealed enclosure use. Custom insulated push spring 10 AWG terminals: Appropriate for the high current demands of a 600W RMS, 1-ohm system. Push-spring design allows fast, clean wiring without tools. Optimised for sealed enclosures: The T1S1-12 is specifically tuned for sealed enclosure use. Confirm recommended enclosure volume with Rockford Fosgate documentation before building to ensure the intended bass response is achieved. Detachable die-cast aluminium trim ring included: Provides a clean, finished installation appearance at the cutout. Detachable for bare-driver installations where a trim ring is not required. Optional grille insert available separately: Confirm compatible part number with your supplier for installations where driver protection is required. Technical Specs Specification Detail SKU T1S1-12 Brand Rockford Fosgate Driver Size 12" slimline Voice Coil Configuration Single 1-ohm Power Handling 600W RMS / 1200W peak Motor Structure High-temp high-energy neodymium Voice Coil Dual wound 2.5"; interior and exterior windings (slotted assembly) Voice Coil Coupling Encapsulating voice coil-to-former technology (patent pending) Motor Technology Proprietary split yoke pass-through (patent pending) Cone Carbon fibre / PMI / glass fibre composite Dust Cap Aluminium Surround Injection-moulded foam with VAST technology Spiders Dual Nomex progressive with integrated lead wires Basket Aluminium die-cast with integrated heat sink fins Shorting Ring Integrated copper cap heat-sinking (IDHS) Pole Piece Vented Input Terminals Custom insulated push spring 10 AWG Trim Ring Detachable die-cast aluminium (included) Grille Optional insert (sold separately) Enclosure Optimisation Sealed Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Mono amplifiers stable at 1 ohm, rated at or near 600W RMS Rockford Fosgate Power T1 and T2 series mono amplifiers (1-ohm stable) Custom sealed enclosures designed for the T1S1-12 confirm recommended sealed enclosure volume with Rockford Fosgate documentation before building Vehicles where traditional-depth subwoofers will not fit: behind-seat ute and truck installations, shallow boot floor vehicles, and custom fabrication builds with depth constraints Rockford Fosgate T1S-1X12 slim sealed loaded enclosure (purpose-built slim sealed enclosure in the T1 slimline range) Rockford Fosgate 10 AWG and heavy-gauge wiring kits for 1-ohm mono amplifier installation Rockford Fosgate RCA cables and signal processors Frequently Asked Questions What is the difference between the T1S1-12 and T1S2-12? Both are 12" T1 slimline subwoofers with identical 600W RMS power handling and the same complete T1 slimline technology stack. The T1S1-12 has a single 1-ohm voice coil presenting a direct 1-ohm load, while the T1S2-12 has a single 2-ohm voice coil presenting a direct 2-ohm load. Choose the T1S1-12 when your amplifier is 1-ohm stable and 1-ohm wiring is the system target; choose the T1S2-12 for 2-ohm stable amplifier pairings. What impedance does the T1S1-12 present to the amplifier? The T1S1-12 is a single 1-ohm voice coil driver, presenting a direct 1-ohm load. No wiring configuration is required connect a 1-ohm stable mono amplifier rated at or near 600W RMS directly to the 10 AWG push spring terminals. How does the T1S1-12 achieve T1-level bass performance in a slimline format? The T1S1-12 uses a proprietary slotted voice coil assembly with interior and exterior windings (patent pending) enabling long excursion travel from a reduced mounting depth, combined with a split yoke pass-through motor technology (patent pending) and high-energy neodymium motor structure. These technologies together allow the T1S1-12 to deliver near-identical performance characteristics to a traditional-depth Power T1 subwoofer from a significantly shallower installation profile. What enclosure type is the T1S1-12 optimised for? The T1S1-12 is specifically optimised for sealed enclosures. Confirm recommended sealed enclosure volume with official Rockford Fosgate documentation or a qualified installer before designing or building an enclosure to ensure the intended bass response is achieved. Is a grille included with the T1S1-12? No. The T1S1-12 ships with a detachable die-cast aluminium trim ring only. An optional grille insert is available separately confirm the compatible part number with your supplier before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1D412 Power 12" T1 Dual 4-Ohm Subwoofer 800 Watts, VAST Technology, T1 Performance in 12" Product Overview The Rockford Fosgate T1D412 is a 12" dual 4-ohm voice coil subwoofer from the flagship Power T1 series, rated at 800 Watts RMS and 1600 Watts peak. Bringing the full suite of Power T1 technologies to the 12" format, the T1D412 delivers the same patented VAST cone technology, FlexFit die-cast aluminium basket, Kevlar fibre reinforced paper cone, Nomex-reinforced high-temp voice coil, and anodized aluminium construction as the T1 15" range in the more universally applicable 12" driver size suited to a wider range of enclosures and Australian vehicle builds. Patented VAST (Vertical Attach Surround Technique) technology increases the effective cone surface area by up to 25% over a conventional surround attachment, allowing the T1D412 to move more air and produce more bass output per watt than a standard 12" driver performing, in Rockford Fosgate's own terms, like a much larger woofer. The dual 4-ohm configuration wires in parallel to a 2-ohm load for maximum power delivery from a compatible high-output mono amplifier, or in series for an 8-ohm load for specific system configurations. Grille and integral trim ring included. Key Specifications Driver size: 12" Voice coil configuration: Dual 4-ohm (DVC) Wiring options: 2 ohm (parallel) / 8 ohm (series) Power handling: 800W RMS / 1600W peak Technology: Patented VAST up to 25% increased cone surface area Basket: FlexFit rigid die-cast aluminium Cone: Kevlar fibre reinforced paper Voice coil former: Anodized aluminium with copper-clad aluminium wire Voice coil reinforcement: Spun-laced Nomex collar (high-temp) Dust cap: Anodized aluminium heat-sinking Input terminals: Proprietary 8 AWG insulated all-metal spring terminals Spiders: Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel leads: Periodic-stitched fatigue-resistant Grille: Included with integral trim ring Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Patented VAST technology up to 25% more cone surface area: VAST (Vertical Attach Surround Technique) repositions the surround attachment point to reclaim up to 25% of the cone area traditionally covered by the surround, delivering more effective piston area than a conventional 12" driver moving more air and producing more bass output per watt from the same basket diameter. FlexFit rigid die-cast aluminium basket: Precision-cast for structural rigidity with installation geometry flexibility for custom fabrication and extreme builds where standard basket angles create clearance issues with the enclosure or vehicle structure. Purpose-built for serious Australian car and truck audio installations. 800W RMS / 1600W peak power handling: The T1D412 handles 200W RMS less than the T1 15" models, reflecting the smaller cone area, while remaining firmly in high-output territory suited to the most powerful 12"-oriented mono amplifiers in the Rockford Fosgate Power series. Dual 4-ohm voice coils 2-ohm parallel or 8-ohm series wiring: Wired in parallel, the T1D412 presents a 2-ohm load for maximum power delivery from a 2-ohm stable mono amplifier. Wired in series, it presents an 8-ohm load for specific bridged or multi-driver configurations. Choose the T1D412 when a 2-ohm stable amplifier pairing is the system target. High-temp voice coil with spun-laced Nomex reinforcement collar: Nomex reinforcement at the critical former-to-cone junction prevents delamination and separation under sustained high-power, high-excursion use at 800W RMS continuous input a key reliability differentiator from lesser 12" drivers at this power level. Anodized aluminium voice coil former with copper-clad aluminium wire: Superior heat dissipation versus paper or plastic formers, extending voice coil life under sustained high-power use in the high-temperature boot environments common in Australian vehicles during summer. Copper-clad aluminium winding reduces moving mass while maintaining conductivity, improving transient response and efficiency. Kevlar fibre reinforced paper cone: Kevlar adds stiffness and break-up resistance without excessive weight, maintaining accurate pistonic motion across the full excursion range at 800W RMS where an unreinforced paper cone would begin to flex and distort. Anodized aluminium heat-sinking dust cap: Acts as an active heat sink during sustained high-power use, drawing thermal energy away from the pole piece and voice coil gap directly contributing to long-term reliability at the power levels the T1D412 is rated to handle. Optimised pole piece and spider venting: Internal air channels reduce compression behind the cone at high excursion levels, improving linearity and bass accuracy at the displacement levels an 800W RMS 12" driver routinely operates at. Proprietary 8 AWG insulated all-metal spring input terminals: Heavy-gauge terminals appropriate for the high current demands of an 800W RMS, 2-ohm system. All-metal construction ensures reliable, corrosion-resistant connections over the long term. Symmetrical dual progressive roll poly-cotton spiders: Dual spider configuration provides linear restoring force symmetry across the full excursion range, reducing harmonic distortion and maintaining voice coil alignment at high displacement levels. Periodic-stitched fatigue-resistant tinsel leads: Periodic stitching distributes flex stress along a longer lead length, significantly extending tinsel lead fatigue life at the sustained high-excursion levels the T1D412 is designed to operate at. Grille and integral trim ring included: Ships complete with protective grille and trim ring for a finished, professional installation appearance without requiring a separately purchased grille. Technical Specs Specification Detail SKU T1D412 Brand Rockford Fosgate Driver Size 12" Voice Coil Configuration Dual 4-ohm (DVC) Wiring Options 2 ohm (parallel) / 8 ohm (series) Power Handling 800W RMS / 1600W peak Technology Patented VAST up to 25% increased cone surface area Basket FlexFit rigid die-cast aluminium Cone Kevlar fibre reinforced paper Dust Cap Anodized aluminium heat-sinking Voice Coil Former Anodized aluminium Voice Coil Wire Copper-clad aluminium Voice Coil Reinforcement Spun-laced Nomex collar (high-temp) Spiders Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel Leads Periodic-stitched fatigue-resistant Input Terminals Proprietary 8 AWG insulated all-metal spring terminals Grille Included with integral trim ring Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 2 ohms (parallel wiring) rated at or near 800W RMS Mono amplifiers stable at 8 ohms (series wiring) for specific system configurations Rockford Fosgate Power T1 and T2 series mono amplifiers Custom ported and sealed enclosures designed for the T1D412 confirm recommended enclosure specifications with Rockford Fosgate documentation before building Rockford Fosgate 8 AWG and heavy-gauge wiring kits for high-current 2-ohm installations Rockford Fosgate RCA cables and signal processors for high-output system integration Competition and show car audio builds requiring a flagship 12" 2-ohm stable driver Australian vehicles where 12" driver diameter fits available enclosure space more practically than 15" Frequently Asked Questions What is the difference between the T1D412 and the T1 15" models? The T1D412 shares the same VAST technology, FlexFit basket, Kevlar cone, Nomex voice coil, and construction standard as the T1D415 and T1D215. The key differences are driver size (12" vs 15") and power handling (800W RMS vs 1000W RMS). The T1D412 suits builds where a 12" format is preferred for enclosure size, vehicle fitment, or system balance reasons. What is the difference between the T1D412 and T1D212? Both are 12" Power T1 subwoofers with identical 800W RMS power handling, VAST technology, FlexFit basket, and construction. The T1D412 has dual 4-ohm coils (2-ohm parallel / 8-ohm series), while the T1D212 has dual 2-ohm coils (1-ohm parallel / 4-ohm series). Choose the T1D412 for 2-ohm stable amplifier pairings; choose the T1D212 for 1-ohm stable amplifier pairings. What impedance does the T1D412 present to the amplifier? The T1D412 has dual 4-ohm voice coils. Wired in parallel, it presents a 2-ohm load the standard configuration for maximising power from a 2-ohm stable high-output mono amplifier. Wired in series, it presents an 8-ohm load. Confirm your amplifier's stable impedance rating before wiring. What enclosure does the T1D412 require? The T1D412 requires a custom or aftermarket enclosure. Rockford Fosgate publishes recommended sealed and ported enclosure specifications for the T1D412 confirm these with official documentation or a qualified installer before designing or building an enclosure. Does the T1D412 include a grille? Yes. The T1D412 ships with a grille and integral trim ring included, providing a finished, professional installation appearance without requiring a separately purchased grille. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1D410 Power 10" T1 Dual 4-Ohm Subwoofer 600 Watts, VAST Technology, T1 Performance in 10" Product Overview The Rockford Fosgate T1D410 is a 10" dual 4-ohm voice coil subwoofer from the flagship Power T1 series, rated at 600 Watts RMS and 1200 Watts peak. Carrying the full Power T1 technology stack into the 10" format, the T1D410 delivers the same patented VAST cone technology, FlexFit die-cast aluminium basket, Kevlar fibre reinforced paper cone, Nomex-reinforced high-temp voice coil, and anodized aluminium construction as the T1 12" and 15" models in the most compact T1 driver size available, suited to enclosure and vehicle builds where 12" or 15" diameter is impractical. Patented VAST (Vertical Attach Surround Technique) technology increases effective cone surface area by up to 25% over a conventional surround attachment, allowing the T1D410 to deliver more bass output per watt than a standard 10" driver punching well above its physical size. The dual 4-ohm configuration wires in parallel to a 2-ohm load for maximum power delivery from a compatible high-output mono amplifier, or in series for an 8-ohm load for specific system configurations. Grille and integral trim ring included. Key Specifications Driver size: 10" Voice coil configuration: Dual 4-ohm (DVC) Wiring options: 2 ohm (parallel) / 8 ohm (series) Power handling: 600W RMS / 1200W peak Technology: Patented VAST up to 25% increased cone surface area Basket: FlexFit rigid die-cast aluminium Cone: Kevlar fibre reinforced paper Voice coil former: Anodized aluminium with copper-clad aluminium wire Voice coil reinforcement: Spun-laced Nomex collar (high-temp) Dust cap: Anodized aluminium heat-sinking Input terminals: Proprietary 8 AWG insulated all-metal spring terminals Spiders: Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel leads: Periodic-stitched fatigue-resistant Grille: Included with integral trim ring Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Patented VAST technology up to 25% more cone surface area: VAST (Vertical Attach Surround Technique) repositions the surround attachment point to reclaim up to 25% of the cone area traditionally covered by the surround. In a 10" driver where every square centimetre of piston area counts, this technology delivers meaningfully more output per watt than a conventional 10" design performing like a larger woofer from the same basket diameter. FlexFit rigid die-cast aluminium basket: Precision-cast for structural rigidity with installation geometry flexibility for custom fabrication and extreme builds where standard basket angles create clearance issues. The most practical basket design in the T1 range for compact enclosures and tight vehicle installations common in Australian hatchbacks, sedans, and utes. 600W RMS / 1200W peak power handling: High-output power handling in a 10" format. Suited to high-performance builds where 10" driver diameter is preferred for enclosure efficiency, vehicle fitment, or SPL output characteristics in smaller sealed or ported enclosures. Dual 4-ohm voice coils 2-ohm parallel or 8-ohm series wiring: Wired in parallel, the T1D410 presents a 2-ohm load for maximum power delivery from a 2-ohm stable mono amplifier. Wired in series, it presents an 8-ohm load for specific bridged or multi-driver configurations. Choose the T1D410 when a 2-ohm stable amplifier pairing is the system target. High-temp voice coil with spun-laced Nomex reinforcement collar: Nomex reinforcement at the critical former-to-cone junction prevents delamination under sustained 600W RMS, high-excursion use maintaining structural integrity at the power levels a T1 10" is designed to handle continuously. Anodized aluminium voice coil former with copper-clad aluminium wire: Superior heat dissipation compared to paper or plastic formers. Copper-clad aluminium winding reduces moving mass while maintaining conductivity, improving transient response and efficiency particularly beneficial in a 10" driver where cone mass directly affects high-frequency bass extension and punch. Kevlar fibre reinforced paper cone: Stiffness and break-up resistance without excessive weight. Maintains accurate pistonic motion at the high excursion levels a 600W RMS 10" driver operates at, where an unreinforced cone would distort and lose accuracy. Anodized aluminium heat-sinking dust cap: Active heat sink during sustained high-power use, drawing thermal energy away from the pole piece and voice coil gap contributing directly to long-term reliability in compact, sealed enclosure environments where heat buildup is accelerated. Optimised pole piece and spider venting: Internal air channels reduce compression behind the cone at high excursion levels, improving linearity and bass accuracy particularly important in compact sealed enclosures where back-pressure management is critical. Proprietary 8 AWG insulated all-metal spring input terminals: Heavy-gauge terminals appropriate for the current demands of a 600W RMS, 2-ohm system. Consistent with the terminal standard across the entire Power T1 subwoofer range. Symmetrical dual progressive roll poly-cotton spiders: Dual spider configuration provides linear restoring force symmetry across the full excursion range, reducing harmonic distortion and maintaining voice coil alignment at high displacement levels. Periodic-stitched fatigue-resistant tinsel leads: Periodic stitching distributes flex stress along a longer lead length, extending tinsel lead fatigue life at the sustained high-excursion levels the T1D410 is designed for. Grille and integral trim ring included: Ships complete with protective grille and trim ring for a finished, professional installation appearance. Technical Specs Specification Detail SKU T1D410 Brand Rockford Fosgate Driver Size 10" Voice Coil Configuration Dual 4-ohm (DVC) Wiring Options 2 ohm (parallel) / 8 ohm (series) Power Handling 600W RMS / 1200W peak Technology Patented VAST up to 25% increased cone surface area Basket FlexFit rigid die-cast aluminium Cone Kevlar fibre reinforced paper Dust Cap Anodized aluminium heat-sinking Voice Coil Former Anodized aluminium Voice Coil Wire Copper-clad aluminium Voice Coil Reinforcement Spun-laced Nomex collar (high-temp) Spiders Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel Leads Periodic-stitched fatigue-resistant Input Terminals Proprietary 8 AWG insulated all-metal spring terminals Grille Included with integral trim ring Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 2 ohms (parallel wiring) rated at or near 600W RMS Mono amplifiers stable at 8 ohms (series wiring) for specific system configurations Rockford Fosgate Power T1 and T2 series mono amplifiers Compact sealed and ported enclosures designed for the T1D410 confirm recommended enclosure specifications with Rockford Fosgate documentation before building Rockford Fosgate 8 AWG and heavy-gauge wiring kits for high-current 2-ohm installations Rockford Fosgate RCA cables and signal processors for high-output system integration Australian vehicles where 10" driver diameter is preferred for compact enclosure fitment: sedans, hatchbacks, SUVs, and utes with limited boot depth Frequently Asked Questions What is the difference between the T1D410 and the T1 12" and 15" models? The T1D410 shares the same VAST technology, FlexFit basket, Kevlar cone, Nomex voice coil, and construction standard as the T1D412, T1D415, and T1D215. The key differences are driver size and power handling 10" at 600W RMS versus 12" at 800W RMS and 15" at 1000W RMS. Choose the T1D410 when a 10" format suits your enclosure design or vehicle fitment requirements. What is the difference between the T1D410 and T1D210? Both are 10" Power T1 subwoofers with identical 600W RMS power handling, VAST technology, FlexFit basket, and construction. The T1D410 has dual 4-ohm coils (2-ohm parallel / 8-ohm series), while the T1D210 has dual 2-ohm coils (1-ohm parallel / 4-ohm series). Choose the T1D410 for 2-ohm stable amplifier pairings; choose the T1D210 for 1-ohm stable amplifier pairings. What impedance does the T1D410 present to the amplifier? The T1D410 has dual 4-ohm voice coils. Wired in parallel, it presents a 2-ohm load the standard configuration for maximising power from a 2-ohm stable high-output mono amplifier. Wired in series, it presents an 8-ohm load. Confirm your amplifier's stable impedance rating before wiring. What enclosure does the T1D410 require? The T1D410 requires a custom or aftermarket enclosure. Rockford Fosgate publishes recommended sealed and ported enclosure specifications for the T1D410 confirm these with official documentation or a qualified installer before designing or building an enclosure. Does the T1D410 include a grille? Yes. The T1D410 ships with a grille and integral trim ring included, providing a finished, professional installation appearance without requiring a separately purchased grille. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1D210 Power 10" T1 Dual 2-Ohm Subwoofer 600 Watts, VAST Technology, 1-Ohm Ready in 10" Product Overview The Rockford Fosgate T1D210 is a 10" dual 2-ohm voice coil subwoofer from the flagship Power T1 series, rated at 600 Watts RMS and 1200 Watts peak. The 1-ohm stable counterpart to the T1D410, the T1D210 carries the complete Power T1 technology package patented VAST cone technology, FlexFit die-cast aluminium basket, Kevlar fibre reinforced paper cone, Nomex-reinforced high-temp voice coil, and anodized aluminium construction in the most compact T1 driver size available, with dual 2-ohm voice coils that wire in parallel to a 1-ohm load for maximum power extraction from 1-ohm stable mono amplifiers. For builds where a 1-ohm stable high-output mono amplifier is already specified and a 10" driver format is preferred for enclosure efficiency or vehicle fitment, the T1D210 is the direct T1 choice. All construction, technology, and performance specifications are identical to the T1D410 the sole differentiator is voice coil impedance and the resulting wiring options. Grille and integral trim ring included. Key Specifications Driver size: 10" Voice coil configuration: Dual 2-ohm (DVC) Wiring options: 1 ohm (parallel) / 4 ohm (series) Power handling: 600W RMS / 1200W peak Technology: Patented VAST up to 25% increased cone surface area Basket: FlexFit rigid die-cast aluminium Cone: Kevlar fibre reinforced paper Voice coil former: Anodized aluminium with copper-clad aluminium wire Voice coil reinforcement: Spun-laced Nomex collar (high-temp) Dust cap: Anodized aluminium heat-sinking Input terminals: Proprietary 8 AWG insulated all-metal spring terminals Spiders: Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel leads: Periodic-stitched fatigue-resistant Grille: Included with integral trim ring Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Dual 2-ohm voice coils 1-ohm parallel or 4-ohm series wiring: The key differentiator from the T1D410. Wiring the dual 2-ohm coils in parallel presents a 1-ohm load extracting maximum rated power from 1-ohm stable mono amplifiers. Wired in series, it presents a 4-ohm load for specific bridged or multi-driver configurations. Choose the T1D210 when your amplifier is 1-ohm stable and 1-ohm wiring is the system target. Patented VAST technology up to 25% more cone surface area: VAST (Vertical Attach Surround Technique) repositions the surround attachment point to reclaim up to 25% of the cone area traditionally covered by the surround. In a 10" driver where piston area is at a premium, this technology is particularly impactful delivering meaningfully more output per watt and performing like a larger woofer from the same basket diameter. FlexFit rigid die-cast aluminium basket: Precision-cast for structural rigidity with installation geometry flexibility for custom fabrication and compact vehicle builds where standard basket angles create clearance issues. Ideal for Australian hatchbacks, sedans, and utes where enclosure space is at a premium. 600W RMS / 1200W peak power handling: Identical to the T1D410, the T1D210 handles 600W RMS continuously in a 10" format the most powerful 10" T1 option available from Rockford Fosgate, suited to high-performance builds where compact enclosure size and high power handling are both required. High-temp voice coil with spun-laced Nomex reinforcement collar: Nomex reinforcement at the critical former-to-cone junction prevents delamination under sustained 600W RMS, high-excursion use in compact sealed or ported enclosures where thermal stress is concentrated. Anodized aluminium voice coil former with copper-clad aluminium wire: Superior heat dissipation versus paper or plastic formers, critical for a 600W RMS 10" driver operating in a compact enclosure where heat accumulates more rapidly than in larger enclosure volumes. Copper-clad aluminium winding reduces moving mass, improving transient response and punch. Kevlar fibre reinforced paper cone: Stiffness and break-up resistance without excessive weight, maintaining accurate pistonic motion at the high excursion levels a 600W RMS 10" driver operates at. Anodized aluminium heat-sinking dust cap: Active heat sink drawing thermal energy away from the pole piece and voice coil gap during sustained high-power use directly contributing to long-term reliability in compact enclosure environments where heat management is critical. Optimised pole piece and spider venting: Internal air channels reduce compression behind the cone at high excursion levels, improving linearity and bass accuracy particularly beneficial in compact sealed enclosures where back-pressure management directly affects performance. Proprietary 8 AWG insulated all-metal spring input terminals: Heavy-gauge terminals consistent with the Power T1 range standard, appropriate for the high current demands of a 600W RMS, 1-ohm system. Symmetrical dual progressive roll poly-cotton spiders: Dual spider configuration provides linear restoring force symmetry, reducing harmonic distortion and maintaining voice coil alignment at high displacement levels. Periodic-stitched fatigue-resistant tinsel leads: Periodic stitching distributes flex stress along a longer lead length, extending fatigue life at the sustained high-excursion levels the T1D210 is designed for. Grille and integral trim ring included: Ships complete with protective grille and trim ring for a finished, professional installation appearance. Technical Specs Specification Detail SKU T1D210 Brand Rockford Fosgate Driver Size 10" Voice Coil Configuration Dual 2-ohm (DVC) Wiring Options 1 ohm (parallel) / 4 ohm (series) Power Handling 600W RMS / 1200W peak Technology Patented VAST up to 25% increased cone surface area Basket FlexFit rigid die-cast aluminium Cone Kevlar fibre reinforced paper Dust Cap Anodized aluminium heat-sinking Voice Coil Former Anodized aluminium Voice Coil Wire Copper-clad aluminium Voice Coil Reinforcement Spun-laced Nomex collar (high-temp) Spiders Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel Leads Periodic-stitched fatigue-resistant Input Terminals Proprietary 8 AWG insulated all-metal spring terminals Grille Included with integral trim ring Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 1 ohm (parallel wiring) rated at or near 600W RMS Mono amplifiers stable at 4 ohms (series wiring) for specific system configurations Rockford Fosgate Power T1 and T2 series mono amplifiers Compact sealed and ported enclosures designed for the T1D210 confirm recommended enclosure specifications with Rockford Fosgate documentation before building Rockford Fosgate 8 AWG and heavy-gauge wiring kits for high-current 1-ohm installations Rockford Fosgate RCA cables and signal processors for high-output system integration Australian vehicles where 10" driver diameter is preferred for compact enclosure fitment and a 1-ohm stable amplifier is in the system Frequently Asked Questions What is the difference between the T1D210 and T1D410? Both are 10" Power T1 subwoofers with identical 600W RMS power handling, VAST technology, FlexFit basket, and construction. The T1D210 has dual 2-ohm coils (1-ohm parallel / 4-ohm series), while the T1D410 has dual 4-ohm coils (2-ohm parallel / 8-ohm series). Choose the T1D210 for 1-ohm stable amplifier pairings; choose the T1D410 for 2-ohm stable amplifier pairings. What impedance does the T1D210 present to the amplifier? The T1D210 has dual 2-ohm voice coils. Wired in parallel, it presents a 1-ohm load the standard configuration for maximising power from a 1-ohm stable high-output mono amplifier. Wired in series, it presents a 4-ohm load. Confirm your amplifier's stable impedance rating before wiring. How does the T1D210 compare to the T1 12" and 15" models? The T1D210 shares the same full T1 technology stack as the T1D412, T1D215, and T1D415. The differences are driver size and power handling 10" at 600W RMS versus 12" at 800W RMS and 15" at 1000W RMS. Choose the T1D210 when a compact 10" format and 1-ohm amplifier pairing are both required. What enclosure does the T1D210 require? The T1D210 requires a custom or aftermarket enclosure. Rockford Fosgate publishes recommended sealed and ported enclosure specifications for the T1D210 confirm these with official documentation or a qualified installer before designing or building an enclosure. Does the T1D210 include a grille? Yes. The T1D210 ships with a grille and integral trim ring included, providing a finished, professional installation appearance without requiring a separately purchased grille. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Pioneer 1300W 10" Single 2 Ohms Voice Coil Subwoofer: Z Subwoofer, The Pursuit of Perfect Bass The Z subwoofer is based on the same highly advanced technology as the Z full range loudspeakers to create seamlessly integrated musical perfection – fast, detailed and extended bass with tremendous impact and clarity. Combining high fidelity and high output in a compact, shallow design, the Z subwoofer offers virtually unlimited installation flexibility. As a result, the placement of the Z subwoofer can be optimized for sound quality and bass reinforcement, unlike conventional subwoofers that must be installed simply where they physically fit. Balance, speed, power and bass extension – the ultimate combination for low-frequency nirvana. Designed for High-Res AudioEven in the sub-bass region, Hi-Res Audio recordings contain significantly more data compared to a standard CD recording and require a subwoofer that is capable of extremely high dynamic range and low distortion that integrates smoothly with the the mid- and high-frequency speakers. The Z subwoofers are designed to take full advantage of Hi-Res Audio recordings, with wide dynamics, extended frequency response and extraordinarily accurate and detailed bass. Shallow Basket With Oversized Cone & MagnetSubwoofers require an extremely strong basket that holds the cone, suspension and motor structure together in perfect alignment even during high excursions at low frequencies. Traditional subwoofers require large enclosures that can be challenging to install seamlessly. The Z subwoofer features a shallow basket for installation flexibility, a low Q design for high performance in small enclosures, an oversized cone (15% larger when compared to a conventional 10″ subwoofer) and a motor structure with a powerful 67.7 oz. magnet, all of which combine to produce fast, detailed and extended bass with tremendous impact and clarity. Twaron Subwoofer Cone ConstructionTwaron is a synthetic aramid fiber that is very strong, heat resistant and rigid when woven into a cloth material. Subwoofer cones created with Twaron are rigid and low mass with excellent damping characteristics. Strength and rigidity are important to maintain cone shape during challenging bass notes, while damping is critical to improving the responsiveness and signal accuracy. The low mass of an aramid fiber cone improves both sensitivity and the speed of the Z subwoofer, increasing output and power handling. Pioneer TS-Z10LS2 Specifications: General Size: 10" Continuous Power Handling (RMS): 400W Maximum Peak Power Handling: 1300W Impedance: 2Œ© Woofer Composition: Twaron & Cellulose Woofer Surround: Butyl Rubber Woofer Magnet Composition: Ferrite Magnet Weight: 67.7oz Mounting Depth: 81mm Audio Hi-Res Certified: Yes Sensitivity (1W/1 m): 74dB Frequency Range: 20 Hz - 3.8 kHz What's in the Box: One 10" Shallow mount subwoofer Six 1-1/8" Self-tapping screws Rubber gasket (installed) Operation's Manual Warranty information Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Pioneer's Most Powerful Subwoofer! Forged in brutal SPL competition, the TS-W5102SPL is Pioneer's most powerful subwoofer. Pioneer engineers have applied what they have learned from 3 years of SPL competition experience, including being the first to break the 180dB barrier in competition. But don't be fooled, this woofer is more than brute power - exceptional engineering has also created a woofer with the essential elements to create incredible sound with any music, as well. Ultra-Strong Dust Cap With Foamed Acrylic Polymer These latest subwoofers feature a newly-developed dust cap, which boasts far greater strength, yet barely any increase in weight. This is made possible by the use of Foamed Acrylic Polymer sandwiched between carbon-fiber and glass-cloth layers. Foamed Acrylic Polymer is lightweight, but still offers outstanding heat resistance and much greater compressive strength than conventional foam materials ‚Äî up to approximately 36 times greater than Carbon Fiber blended paper, depending on the angle of force. Foamed Acrylic Polymer also gives the dust cap durability to match its tremendous strength. Titanium Voice Coil Former (Bobbin) With up to 6000 watts running through the voice coil, an exceptionally strong former is required. Pioneer now uses Titanium, one of the strongest materials available. The result is 565% stronger than the former design. Dual Voice Coil TS-W5102SPL now features two 2 ohm voice coils. This design offers you the flexibility of turning it into either a 1-ohm sub (voice coils connected in parallel), an 4-ohm sub (connected in a series), or powering the voice coils separately (dual 4 ohm loads). More options, more power: that's what DVC is all about. It's All About the Details There are many more new changes as well. A new patent-pending design on the voice coil winding. A new attachment process for the surround to the cone. Improvements to the Spider and the tensile wire. All add up to greater performance, greater reliability and deeper, more powerful bass. Interlaced Carbon Fiber Reinforced IMPP Cone* The cone of the TS-W5102SPL features a patent-pending design that combines long carbon fibers into a proprietary blend. The strong, lightweight characteristics of carbon fiber render a robust IMPP cone capable of withstanding the enormous pressure levels the speaker is capable of generating. aramid fiber Reinforced Rubber Radial Surround* When a subwoofer is working overtime, the cone exhibits dramatic movement that must be controlled appropriately without compromising the actual sound quality. The same material used in bullet-proof vests, aramid fiber is woven into the rubber surround producing a superior material that eliminates puckering and improves highpower performance.The overhung design allows for a 22% larger cone surface which translates to even more sound pressure. Ceramic-Coated Voice Coil Wire* The TS-W5102SPL's voice coil wire is coated with ceramic, which allows it to handle extreme heat. This doubles the input power handling capability and significantly improves reliability. Aero-Dynamic Magnetic Gap (ADMG) As a speaker operates, the movement generated between the top and back plates is subject to resistance, both mechanical and air pressure. To reduce this resistance, strategic channels are precisely machined into the top and back plates. This effectively reduced physical resistance by more than 10% and thus reduced power waste making the speaker even stronger. Triple-Stack Magnet Assembly To build the most powerful subwoofer in the world you need power. Twenty pounds of it! Three gigantic ferrite magnets are combined with an extra-large top and back plate to create a motor with enough force to exceed 170+ dB. Cast Aluminum Basket Designed from scratch by Pioneer, this one-piece aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design: reduced internal stress, superior damping, and increased magnetic efficiency. *Patent-Pending Feature Specifications: Size 12" Woofer Con e Material Interlaced Carbon Fiber Reinforced IMPP Cone Woofer Surround Wide-Roll 3-Layer aramid fiber Woven Radial with Honeycomb Cloth Voice Coil High Inductance, 6-Layer, Long Voice Coil Voice Coil Wire Y Voice Coil Bobbin Pure Titanium Voice Coil Bobbin Damper (Spider) Y Top Plate Thick 1.2" (30mm) Projected Pole Yoke with Vented Pole Y Aero-Dynamic Magnetic Gap Design Y Magnet Construction Massive Triple Stacked (320 oz.) Basket Design Aluminum Die-Cast Rigid Chassis Gasket (None) Wire Terminals 8-Gauge Wire Terminal Watts MAX. Music Power 6000W Watts Nominal Power Handling 2500w Frequency Response 18Hz ~ 2kHz Sensitivity 88dB Ohm Rating DVC (1ohm or 4ohm) Recommended Enclosure 1.5 Cubic Feet Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Produces Thick, Deep, Powerful and Accurate Bass! Too much isn’t enough, embrace the bass. The D subwoofer is a culmination of Pioneer technologies that produce thick, deep, powerful and accurate bass that makes listening to your favorite music energetic, fun and engaging. Combining bass quality and bass quantity with high power, plus installation flexibility that provide high performance in both acoustic suspension (sealed) and bass reflex (ported) enclosures, the D subwoofer is the ultimate all-around performer. Slam, attack, power. Don’t just listen to your music, feel it. Butyl Rubber SurroundMade of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in less distortion and superior frequency response. Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP)Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone - with low mass and high damping, PP cones offer good sensitivity and low distortion. However, polypropylene cones lack the rigidity and strength required for high output and extreme low bass. To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting Aramid Fiber Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep, powerful and undistorted bass. Large Diameter Voice Coil & Double Stacked MagnetsA subwoofer motor structure consists of the voice coil and magnet assembly. Increasing the diameter and length of the voice coil provides greater control of the woofer cone and higher power handling. To take full advantage, however, the magnet must also be increased, both in magnetic power and physical size. The D subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL output with no sacrifice in sound quality. Pioneer TS-D12D4 Features: 2,000W Max Power (600W Nom) Dual 4Œ© Voice Coil Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) Cone Construction Butyl Rubber Surround for Strength and Linearity During High Excursion Pioneer TS-D12D4 Specifications: General Size: 12" Continuous Power Handling (RMS): 600W Maximum Peak Power Handling: 2000W Impedance: Dual 4‚Ѷ Woofer Composition: Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) Woofer Surround: Butyl Rubber Woofer Magnet Composition: Ferrite Magnet Weight: 74.1oz Mounting Depth: 157mm Audio Hi-Res Certified: No Sensitivity (1W/1 m): 78dB Frequency Range: 20 Hz - 4.7 kHz What's in the Box: One 12" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/4" Screws Adhesive backed foam gasket Manual Warranty information Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Designed to Perfectly Match the Pioneer ‚ÄúA‚Äù Series Full-Range Loudspeakers Without Breaking the Budget Combining the latest design and technology with specifically selected materials these subwoofers provide high quality sound and excellent bass response. Match with Pioneer's GM-A Series amplifiers for an impressive in car experience! IMPP Cone Construction 12‚Ä≥ glass fiber and mica interlaced Injection Molded Polypropylene (IMPP) cone construction. CarSoundFit The Pioneer CarSoundFit app is a car sound simulator designed to allow you to experience an in-car sound with your own smartphone. Hear examples of the difference between the original speakers and Pioneer speaker upgrades to understand what improvements Pioneer can offer. To experience the virtual listening demonstration download the free Pioneer CarSoundFit app from either the App Store or Google Play. Features: Glass fiber and mica interlaced Injection Molded Polypropyene (IMPP) cone construction Butyl rubber surround and polycotton / cotton dual spider for strength and linearity during high excursion Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

The Perfect Stealth Box The ZX18PBS offers both convenience and high-end sound quality in a compact design that's less than 13cm deep, including the grill. Along with its impressive size, the 8‚Ä≥ subwoofer boasts a maximum power of 400 watts, ensuring a high-quality audio experience. The ZX18PBS subwoofer also comes with brackets, screws, and L & Z brakes, allowing for versatile mounting options, including down-firing. Its adaptability makes it easy to integrate into any vehicle, while its discreet appearance and precise, dynamic sound make it an excellent addition to any 2 or 3-way audio system. Phoenix Gold ZX18PBS Specifications: Power Handling (MAX): 400W Power Handling (RMS): 200W Subwoofer size: 8 (200mm) Sensitivity: 88dB (1W/1m) Sealed enclosure Impedance: 4Ohm Dimensions (LxWxH): 489 x 306.6 x 124.8mm Legendary Products & Support From Authorized Dealers When you choose Phoenix Gold, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Phoenix Gold dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Phoenix Gold's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Phoenix Gold dealer today!

Read more less