Serious Bass. Compact Package. Built to Survive the Elements. The Rockford Fosgate PM500X1bd is a 500 Watt Class-BD mono amplifier engineered for marine, motorsport, and powersports environments where dedicated subwoofer power and genuine weather protection are the brief. Delivering 150W x 1 at 4 ohms, 300W x 1 at 2 ohms, and a full 500W x 1 at 1 ohm, it sits in the sweet spot of the Punch Marine mono range more than enough to drive a serious subwoofer setup without the electrical demands or physical footprint of a kilowatt-class amp. Like its bigger sibling the PM1000X1bd, the PM500X1bd runs Rockford Fosgate's Class-BD circuit topology, achieving 75–80% power efficiency compared to the 20–60% typical of Class A/B designs. That means cleaner bass, less heat generated per watt, and reduced strain on your boat or vehicle's electrical system. Its 1-ohm stability lets you run two 4-ohm DVC subwoofers or four 2-ohm DVC subs without any complex impedance gymnastics, and its frequency response is locked between 20 Hz and 250 Hz every watt is dedicated to the low end where it matters most. Rockford Fosgate's Element Ready™ construction marine-grade two-part epoxy conformal-coated PCB and corrosion-resistant stainless steel hardware keeps it performing reliably through saltwater, humidity, outback dust, and relentless Australian UV. Key Specifications 500W total power output (CTA-2006 compliant) 150W x 1 at 4 ohms | 300W x 1 at 2 ohms | 500W x 1 at 1 ohm Class-BD circuit topology 75–80% efficiency rating 1-ohm stable monoblock; dedicated low-frequency output only Frequency response: 20 Hz – 250 Hz THD+N: Less than 1% Input sensitivity: 150mV – 12V (low- and high-level) Low-pass crossover: 50 Hz – 250 Hz @ 12 dB/octave Butterworth Infrasonic filter: 28 Hz @ 12 dB/octave Butterworth All-Pass: No (low-frequency only) On-board Punch EQ: Bass +0 to +18 dB @ 45 Hz RCA pass-through outputs Optional remote Punch Level Control (PLC2) compatible Marine-grade two-part epoxy conformal coating on PCB Marine-grade stainless steel hardware Element Ready™: Dust, UV, Temperature, Water, Corrosion & Vibration rated Max current draw: 70A at 13.8V sinewave 2-year manufacturer warranty Features & Benefits Class-BD Technology More Bass, Less Current Draw The PM500X1bd's Class-BD circuit delivers 75–80% power efficiency, compared to 20–60% for Class A/B. At 500W, this translates directly into less heat generated inside sealed installations, reduced load on your battery and alternator, and a longer, more reliable lifespan for the amp and your electrical system particularly valuable for boats and UTVs with limited charging headroom. 1-Ohm Stable Flexible Multi-Sub Wiring Run two 4-ohm DVC subwoofers with voice coils wired in parallel (final load: 1 ohm), or four 2-ohm DVC subs in series-parallel (final load: 1 ohm). The PM500X1bd handles either configuration with ease no voltage drop, no thermal runaway, no compromise on output. Dedicated Low-Frequency Response Focused Power With a frequency response of 20 Hz to 250 Hz and no all-pass mode, the PM500X1bd routes every watt directly to the bass band. For subwoofer-only or mid-bass applications this is a significant advantage no wasted amplifier headroom on frequencies your sub can't reproduce. Infrasonic Filter at 28 Hz Built-In Sub Protection The onboard 28 Hz infrasonic filter rolls off subsonic frequencies at 12 dB/octave, protecting subwoofer cones from over-excursion caused by ultra-low frequency content hull resonance, port noise, or corrupted audio files. Essential for vented enclosures and high-excursion subs used in open-air marine environments on Aussie waterways. Marine-Grade Element Ready™ Construction Two-part epoxy conformal-coated circuit boards and corrosion-resistant stainless steel hardware provide full protection against saltwater spray, humidity, UV radiation, and mechanical vibration. Designed and built for real marine and motorsport conditions not a cosmetic upgrade over a standard car amp. C.L.E.A.N. Gain Setting with LED Indicators Calibrated Level Eliminates Audible Noise. Colour-coded LEDs (Blue: <0.5% THD | Violet: 1% THD | Red: 10%+ THD) guide precise gain matching between your source unit and the amplifier eliminating clipping distortion that damages subwoofer voice coils and delivers clean, dynamic bass at any volume level. High-Level Input with Auto Turn-On Accepts speaker-level signals up to 12V directly from factory (OEM) head units no line output converter required. Auto Turn-On senses the audio signal and powers the amp at ignition. Ideal for Aussie utes, 4WDs, tinnies, and UTVs running factory radios. RCA Pass-Through Outputs Loop the pre-amp signal downstream to a separate full-range amplifier with no signal degradation. Pair the PM500X1bd on a subwoofer channel and feed a PM400X4 or PM300X2 for full-range speakers from the same head unit output one signal source, two amplifiers, no converter needed. Optional PLC2 Remote Level Control The PM500X1bd is PLC2-ready. Add the optional Rockford Fosgate PLC2 remote controller (sold separately) for driver-seat subwoofer level adjustment, with an onboard input clip indicator for real-time gain monitoring. MEHSA³ Cast Aluminium Heatsink Maximum Efficiency Heat Sink Application (MEHSA³) construction delivers up to five times better heat transfer than conventional mounting methods keeping the PM500X1bd running cool in sealed marine cavities, under-seat bays, and enclosed UTV storage compartments. Muted Turn-On Silent power-on at ignition with no pop or thump through the subwoofer protecting the voice coil and surround every time the system cycles. Technical Specs Specification Detail SKU PM500X1bd Number of Channels 1 (Mono) Total Power 500W Rated Power – 4 ohm (CTA-2006, <1.0% THD+N) 150W x 1 Rated Power – 2 ohm (CTA-2006, <1.0% THD+N) 300W x 1 Rated Power – 1 ohm (CTA-2006, <1.0% THD+N) 500W x 1 Circuit Topology Class-BD Class-BD Efficiency 75–80% Minimum Impedance 1 ohm stable Bridgeable No (monoblock) Frequency Response 20 Hz – 250 Hz THD + Noise Less than 1% Input Sensitivity Low-Level: 150mV – 4V / High-Level: 4V – 12V Signal Input 1 x RCA pair + High-Level Signal Output 1 x RCA Pass-Through Punch EQ Bass 0 dB to +18 dB @ 45 Hz Low-Pass Crossover 50 Hz – 250 Hz @ 12 dB/octave Butterworth Infrasonic Filter 28 Hz @ 12 dB/octave Butterworth All-Pass No Auto-Sense Turn-On Yes High-Level Input Yes (with Auto Turn-On) Remote Level Control Optional PLC2 (sold separately) Circuit Board Protection Marine-grade two-part epoxy conformal coating Heatsink Cast aluminium (MEHSA³ process) Hardware Marine-grade stainless steel Element Ready™ Dust, UV, Temperature, Water, Corrosion, Vibration CTA-2006 Compliant Yes CE Compliant Yes Max Current Draw (13.8V Sinewave) 70A Visual Indicators Power/Protect/Thermal LED; C.L.E.A.N. In/Out LED LED Colour Legend Blue: <0.5% THD / Violet: 1% THD / Red: 10%+ THD Dimensions (H x W x D) 60.5 x 197.1 x 337.3 mm (2.38 x 7.76 x 13.28 in) Shipping Weight Confirm with supplier Warranty 2 Years Compatible With Subwoofer Configurations (Optimised For) Two 4-ohm DVC subwoofers, voice coils wired parallel (final load: 1 ohm) recommended Four 2-ohm DVC subwoofers wired series-parallel (final load: 1 ohm) Single 4-ohm SVC subwoofer (150W @ 4 ohm) Single 2-ohm SVC subwoofer (300W @ 2 ohm) Rockford Fosgate M2D4-12 Marine Subwoofer Rockford Fosgate Punch P2D4-10 / P2D4-12 Subwoofers Rockford Fosgate Punch P1D4-10 / P1D4-12 Subwoofers Marine & Boat Audio Tinnies, ski boats, bowriders, pontoons, and cabin cruisers dedicated bass channel Paired with Rockford Fosgate PM400X4 or PM300X2 (via RCA pass-through) for full front-stage + sub system Rockford Fosgate PMX-5CAN Marine Head Unit Motorsport & Powersports Side-by-side UTVs (Can-Am Maverick, Polaris RZR, Yamaha YXZ, Honda Talon) Rockford Fosgate UTV subwoofer enclosures Powersports applications requiring compact 1-ohm stable mono power 4WD, Ute & Touring Vehicles Toyota LandCruiser (100, 200, 300 Series), HiLux, Prado Ford Ranger, Everest, Bronco Isuzu D-MAX / MU-X Nissan Patrol (Y60, Y61, Y62), Navara Mitsubishi Triton, Pajero Sport Any vehicle with an OEM (factory) head unit via high-level input Compatible Accessories Rockford Fosgate PLC2 Remote Punch Level Controller (sold separately recommended) RFI-1 Amplifier Wiring Installation Kit (recommended for extended warranty) 4 AWG OFC wiring kit matched to 70A current draw for safe, optimised power delivery Frequently Asked Questions What subwoofer wiring configuration works best with the PM500X1bd? For maximum 500W output at 1 ohm, wire two 4-ohm DVC subwoofers with each voice coil pair connected in parallel for a final 1-ohm load. Alternatively, four 2-ohm DVC subwoofers in series-parallel also achieve a 1-ohm final load. Always verify total impedance before powering on. Can the PM500X1bd power full-range speakers? No. The PM500X1bd has a dedicated low-frequency response of 20 Hz to 250 Hz with no all-pass mode it is designed exclusively for subwoofers and mid-bass drivers. For full-range speakers, pair it with a Rockford Fosgate PM400X4 or PM300X2 using the onboard RCA pass-through outputs. How does the PM500X1bd differ from the PM1000X1bd? Both use Class-BD topology and identical marine-grade construction, but the PM500X1bd delivers 500W at 1 ohm versus 1,000W for the PM1000X1bd. The PM500X1bd draws 70A maximum versus 130A, making it a better fit for systems with tighter electrical budgets particularly boats and UTVs with standard alternators. Choose the PM1000X1bd for maximum output in larger, purpose-built subwoofer enclosures. Does the infrasonic filter need to be enabled manually? The infrasonic filter operates at 28 Hz and is a fixed circuit within the amplifier it provides constant protection against damaging subsonic frequencies without requiring any manual adjustment. It is particularly important for vented subwoofer enclosures that are more susceptible to over-excursion below the port tuning frequency. What warranty applies to the PM500X1bd in Australia? The PM500X1bd carries a 2-year manufacturer warranty. Australian warranty terms are administered through the authorised local distributor confirm coverage details at point of purchase, as Rockford Fosgate's published US warranty applies only to products purchased via US-authorised dealers. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

500 Watts of Punch. All the Boot Space You Need. Product Overview The Rockford Fosgate PM500X2 is a 500 Watt, 2-channel Class A/B amplifier purpose-built for marine, motorsport, and powersports environments. Delivering 150W x 2 at 4 ohms, 250W x 2 at 2 ohms, or a massive 500W x 1 bridged at 4 ohms, this amp is specifically engineered for high-demand subwoofer applications optimised for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Unlike bulkier alternatives, the PM500X2 punches well above its compact footprint (60.5 x 197.1 x 337.3 mm), making it a smart choice for tinnies, UTVs, utes, and touring 4WDs where boot space and under-seat real estate is at a premium. Rockford Fosgate's Element Ready™ construction marine-grade two-part epoxy conformal-coated PCB, UV-resistant materials, and corrosion-resistant stainless steel hardware means this amp is built to handle saltwater spray, humidity, outback dust, and the unforgiving Australian sun without skipping a beat. Key Specifications 500W total power output (CTA-2006 compliant) 150W x 2 channels at 4 ohms | 250W x 2 channels at 2 ohms 500W x 1 channel at 4 ohms (bridged mono) Class A/B circuit topology (Trans•ana) 2-channel configuration; bridgeable to mono Frequency response: 20 Hz – 20 kHz THD+N: Less than 1% Input sensitivity: 150mV – 12V (low- and high-level) Crossover: 12 dB/octave Butterworth, 50 Hz – 250 Hz (HP/LP/AP) On-board Punch EQ2: Bass +0 to +18 dB @ 45 Hz | Treble +0 to +12 dB @ 12 kHz RCA pass-through outputs (active signal loop for daisy-chaining amps) Optional remote Punch Level Control (PLC2) compatible Marine-grade two-part epoxy conformal coating on PCB Marine-grade stainless steel hardware Element Ready™: Dust, UV, Temperature, Water, Corrosion & Vibration rated Recommended fuse: 80A x 1 (not included) Max current draw: 80A at 13.8V sinewave 2-year manufacturer warranty Features & Benefits Designed for Subwoofer-First Builds The PM500X2's massive output stage is specifically optimised for subwoofer loads pair it with two 8-ohm SVC subs or wire four 2-ohm DVC subs in series-parallel for a punishing, clean bass foundation. Whether it's thumping across open water or rattling corrugated outback tracks, this amp was made for the low end. Compact Footprint More Room for Subs At just 337.3 mm long, the PM500X2 fits neatly under seats, behind panels, or in tight marine cavities where a larger amp simply won't go. Less amp space = more room for the enclosure that actually moves air. Marine-Grade Element Ready™ Construction Conformal-coated circuit boards using marine-grade two-part epoxy, combined with corrosion-resistant stainless steel hardware, provide genuine protection against saltwater, humidity, UV radiation, and vibration. This isn't a consumer amp with a coat of paint it's built to last in real-world marine and motorsport conditions. Class A/B Trans•ana Topology Rockford Fosgate's Trans•ana circuit simplifies the signal path, keeping the signal travelling at lower voltage for improved reliability and a flat, distortion-free response. Independent testing consistently measures distortion below 0.02% far better than the <1% spec rating. C.L.E.A.N. Gain Setting Technology Calibrated Level Eliminates Audible Noise. LED clip indicators on the input and output side guide you to a perfect gain match between head unit and amplifier protecting your subwoofers from clipping distortion, eliminating setup guesswork, and maximising dynamic headroom. High-Level Input with Auto Turn-On Connects directly to factory head units via speaker-level inputs no line output converter required. Auto Turn-On senses the audio signal and powers the amp automatically at ignition. Ideal for Aussie utes and 4WDs running OEM radios where an aftermarket RCA tap isn't available. RCA Pass-Through Outputs The PM500X2 includes RCA preamp pass-through outputs, allowing you to daisy-chain a second amplifier run the PM500X2 on subwoofers and loop the signal to a separate 4-channel amp for your full-range speakers. One signal source, two amplifiers, no signal converter needed. Optional Remote Punch Level Control (PLC2) The PM500X2 is PLC2-ready. Add the optional Rockford Fosgate PLC2 remote level controller (sold separately) to adjust subwoofer output from the driver's seat with the added benefit of an onboard input clip indicator so you always know when you're pushing the amp too hard. MEHSA³ Cast Aluminium Heatsink Maximum Efficiency Heat Sink Application (MEHSA³) construction delivers up to five times better heat transfer than conventional mounting methods. Keeps the PM500X2 running cool in enclosed spaces, fibreglass hulls, and sealed under-seat compartments during long summer days on the water. Muted Turn-On Eliminates the power-on thump through your subwoofers when the ignition is cycled a small detail that protects your investment over the life of the install. Technical Specs Specification Detail SKU PM500X2 Number of Channels 2 Total Power 500W Rated Power – 4 ohm (CTA-2006, <1.0% THD+N) 150W x 2 Rated Power – 2 ohm (CTA-2006, <1.0% THD+N) 250W x 2 Rated Power – 4 ohm Bridged (CTA-2006) 500W x 1 Dynamic Power – 4 ohm 223W x 2 Circuit Topology Class A/B (Trans•ana) Bridgeable Yes (mono, 4 ohm minimum) Frequency Response 20 Hz – 20 kHz THD + Noise Less than 1% Input Sensitivity Low-Level: 150mV – 4V / High-Level: 4V – 12V Signal Input 2 x RCA + High-Level Signal Output 2 x RCA Pass-Through Punch EQ2 Bass 0 dB to +18 dB @ 45 Hz Punch EQ2 Treble 0 dB to +12 dB @ 12 kHz High-Pass/Low-Pass Crossover 50 Hz – 250 Hz @ 12 dB/octave Butterworth All-Pass Yes Auto-Sense Turn-On Yes High-Level Input Yes (with Auto Turn-On) Remote Level Control Optional PLC2 (sold separately) Circuit Board Protection Marine-grade two-part epoxy conformal coating Heatsink Cast aluminium (MEHSA³ process) Hardware Marine-grade stainless steel Element Ready™ Dust, UV, Temperature, Water, Corrosion, Vibration CTA-2006 Compliant Yes CE Compliant Yes Recommended Fuse 80A x 1 (not included) Max Current Draw (13.8V Sinewave) 80A Visual Indicators Power/Protect LED; C.L.E.A.N. In/Out LED Dimensions (H x W x D) 60.5 x 197.1 x 337.3 mm (2.38 x 7.76 x 13.28 in) Shipping Weight 5.4 kg (11.9 lbs) Warranty 2 Years Compatible With Subwoofer Configurations (Optimised For) Pair of 8-ohm SVC subwoofers (one per channel, stereo) Four 2-ohm DVC subwoofers (wired series-parallel, bridged mono) Rockford Fosgate PM series marine subwoofers Rockford Fosgate Punch P2 / P3 series subwoofers (P2D4-10, P3D4-12) Rockford Fosgate M2D4-12 Marine Subwoofer Marine & Boat Audio Tinnie, ski boat, pontoon, bowrider, and cabin cruiser installs Paired with Rockford Fosgate PM400X4 (4-channel full-range amp) via RCA pass-through Rockford Fosgate PMX-5CAN Marine Head Unit Motorsport & Powersports Side-by-side UTVs (Can-Am Maverick, Polaris RZR, Yamaha YXZ, Honda Talon) Rockford Fosgate UTV subwoofer enclosures 4WD, Ute & Touring Vehicles Toyota LandCruiser (100, 200, 300 Series), HiLux, Prado Ford Ranger, Everest, Bronco Isuzu D-MAX / MU-X Nissan Patrol, Navara Mitsubishi Triton, Pajero Sport Any vehicle running an OEM (factory) head unit via high-level input Compatible Accessories Rockford Fosgate PLC2 Remote Punch Level Controller (sold separately) RFI-1 Amplifier Wiring Installation Kit (recommended for extended warranty) Rockford Fosgate 4 AWG OFC wiring kit (for optimal power delivery) Frequently Asked Questions What subwoofer configuration works best with the PM500X2? The PM500X2 is optimised for a pair of 8-ohm SVC subwoofers (one per channel) or four 2-ohm DVC subwoofers wired in series-parallel, bridged to mono. Always confirm your final load impedance is 4 ohms or higher when bridging. Can I run speakers and a subwoofer from this amp at the same time? The PM500X2 is a 2-channel amplifier best suited to subwoofer-only or stereo speaker applications. For a combined system, pair it with a separate 4-channel amplifier using the PM500X2's RCA pass-through outputs to loop the signal no extra signal converter required. Does the PM500X2 connect to a factory head unit? Yes. The high-level input accepts speaker-level signals up to 12V directly from OEM head units, with Auto Turn-On sensing to power the amp with ignition. No line output converter is needed, making it compatible with most factory-fitted radios in AU utes and 4WDs. What is the PLC2 and do I need it? The Rockford Fosgate PLC2 is an optional remote level controller (sold separately) that mounts within reach of the driver, allowing real-time subwoofer volume adjustment. It also includes an input clip LED useful for monitoring gain headroom on the fly. It's optional but recommended for subwoofer-focused installs. Is the PM500X2 covered by warranty when purchased in Australia? The PM500X2 carries a 2-year manufacturer warranty. Australian warranty terms are administered through the authorised local distributor confirm coverage details at point of purchase, as Rockford Fosgate's printed US warranty applies only to products purchased via US-authorised dealers. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate PM600X4 Punch Marine 600W 4-Channel Amplifier Versatile Power, Marine-Grade Durability Product Overview The Rockford Fosgate PM600X4 is a 600 Watt 4-channel Class A/B amplifier purpose-built for marine and motorsport environments. Designed for versatility as much as output, the PM600X4 operates in true 4-channel stereo mode for full speaker coverage, bridges to a high-power 2-channel configuration for dedicated subwoofer or zone driving, or runs in 3-channel mode with stereo speakers on the front channels and subwoofers on the rear all from a single amplifier with no additional hardware required. Marine-grade two-part epoxy conformal coating on the circuit boards, stainless steel hardware, and a cast aluminium heatsink make the PM600X4 built to withstand the moisture, salt spray, vibration, and heat conditions of open Australian watercraft and powersport vehicles. High-level input with Auto Turn-On, C.L.E.A.N. signal detection, RCA pass-through outputs, on-board Punch EQ with +18 dB boost at 45 Hz, a 12 dB/octave Butterworth crossover, and optional PLC2 remote level control complete an amplifier equally at home in a serious marine audio build or a high-output powersport installation. Key Specifications Channels: 4 (stereo), bridgeable to 2-channel, 3-channel mode capable Total power: 600W Circuit topology: Class A/B Crossover: Variable HP/LP 12 dB/octave Butterworth Punch EQ: 0 dB to +18 dB @ 45 Hz Inputs: High-level and low-level (RCA) Auto Turn-On: Yes (via high-level input) RCA pass-through outputs: Yes C.L.E.A.N. signal setup: Yes Remote level control: Optional PLC2 (sold separately) Circuit board protection: Marine-grade two-part epoxy conformal coating Hardware: Marine-grade stainless steel Heatsink: Cast aluminium Protection: Short circuit and over-current Control panel: Stealth top-mounted Muted turn-on: Yes Dimensions: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits True 4-channel, 2-channel bridged, and 3-channel operating modes: The PM600X4 adapts to virtually any marine or powersport audio system configuration without additional hardware. Run four full-range speakers in stereo, bridge both channel pairs for high-power 2-channel subwoofer or zone driving, or combine stereo front speakers with bridged rear subwoofer channels in 3-channel mode all from one amplifier. Class A/B circuit topology with high dynamic power: Class A/B delivers the sonic accuracy and dynamic headroom preferred for full-range speaker applications, making the PM600X4 a natural fit for four-speaker marine systems where tonal quality matters as much as output level. Marine-grade two-part epoxy conformal PCB coating: Circuit boards are sealed against moisture, humidity, and salt spray essential for open-water use in coastal and estuarine conditions across Australia. The same conformal coating standard applied across the Rockford Fosgate Punch Marine amplifier range. Marine-grade stainless steel hardware: All fasteners and hardware are stainless steel, resisting corrosion in saltwater and humid environments for long-term mechanical integrity. Cast aluminium heatsink: Manages thermal output from the Class A/B topology efficiently, ensuring sustained performance during extended use in the high ambient temperatures common on Australian watercraft and powersport vehicles during summer. High-level input with Auto Turn-On: Connects directly to factory head units or speaker-level outputs without requiring a dedicated remote turn-on wire. Ideal for retrofit marine installs and vessels without aftermarket head units. C.L.E.A.N. signal detection: Rockford Fosgate's proprietary gain-setting system uses LED indicators to show real-time THD levels, ensuring accurate gain structure without an oscilloscope or test tones practical for field installation on boats and powersport vehicles. RCA pass-through outputs: Route the signal to additional downstream amplifiers or signal processors without Y-adapters. Keeps the system wiring clean and expandable as the installation grows. Variable HP/LP 12 dB/octave Butterworth crossover: Independent high-pass and low-pass crossover control allows precise frequency management across full-range speakers and subwoofer channels in the same system. On-board Punch EQ (+18 dB @ 45 Hz): Add the signature Rockford bass punch without an external equaliser. Particularly effective in open-air marine and powersport environments where low-frequency energy dissipates rapidly. Optional PLC2 remote Punch Level Control: Add a dash or helm-mounted remote volume knob for convenient bass output adjustment underway. The PLC2 includes an input clip indicator and is sold separately. Muted turn-on: Eliminates the startup pop or thump that can stress speakers and disturb passengers during system power-up. Stealth top-mounted control panel: All gain, crossover, and EQ adjustments are accessible from the top of the unit for clean installation and straightforward setup and tuning. Short circuit and over-current protection: Two independent protection circuits safeguard the amplifier and connected speakers against common installation faults and operating conditions. Technical Specs Specification Detail SKU PM600X4 Brand Rockford Fosgate Number of Channels 4 Total Power 600W Circuit Topology Class A/B Operating Modes 4-channel stereo / 2-channel bridged / 3-channel Crossover Variable HP/LP 12 dB/octave Butterworth Punch EQ 0 dB to +18 dB @ 45 Hz Signal Input High-level and low-level RCA Signal Output RCA pass-through Auto Turn-On Yes (via high-level input) C.L.E.A.N. Setup Yes Remote Level Control Optional PLC2 (sold separately) Muted Turn-On Yes Control Panel Stealth top-mounted Circuit Board Protection Marine-grade two-part epoxy conformal coating Hardware Marine-grade stainless steel Heatsink Cast aluminium Protection Short circuit / over-current Rated Power Confirm with supplier CEA-2006 Compliant Confirm with supplier Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Marine vessels: bow riders, pontoons, ski boats, fishing boats, tinnies, and centre console vessels Powersport applications: UTVs, side-by-sides, dune buggies, and off-road 4WDs Factory and aftermarket marine head units with RCA or high-level outputs Rockford Fosgate Punch and Prime marine speakers (4-channel stereo mode) Rockford Fosgate marine subwoofers (bridged rear channels in 2 or 3-channel mode) Optional Rockford Fosgate PLC2 Punch Level Control (sold separately) Rockford Fosgate PMX-series source units and display heads Downstream amplifiers or signal processors via RCA pass-through outputs Frequently Asked Questions What are the operating modes of the PM600X4? The PM600X4 operates in three configurations: standard 4-channel stereo for four speakers, bridged 2-channel for high-power subwoofer or zone driving, or 3-channel mode combining stereo front speakers with bridged rear subwoofer channels providing full system flexibility from a single amplifier without additional hardware. Can the PM600X4 connect directly to a factory head unit? Yes. The high-level input with Auto Turn-On circuit allows direct connection to factory head unit speaker outputs without requiring a dedicated remote turn-on wire or RCA outputs ideal for OEM integration in boats and vehicles without aftermarket head units. What is C.L.E.A.N. and why is it useful for marine installation? C.L.E.A.N. (Clip Level Elimination and Noise) is Rockford Fosgate's proprietary gain-setting system using LED indicators to show real-time THD levels during setup. For marine and powersport installs where bringing test equipment onto a vessel or vehicle is impractical, C.L.E.A.N. allows accurate gain structure to be set quickly using the amplifier's own indicators. Does the PM600X4 include a remote level control? No. The optional Punch Level Control (PLC2) is sold separately and connects to the dedicated remote control input on the amplifier for convenient helm or dash-mounted bass volume adjustment. The PLC2 also includes an input clip indicator. Is the PM600X4 suitable for saltwater marine environments? Yes. The PM600X4 is built with marine-grade two-part epoxy conformal-coated circuit boards and stainless steel hardware, specifically designed to withstand the moisture, salt spray, humidity, and vibration conditions of open saltwater and estuarine environments common across Australian coastal use. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate PMX-1 Punch Marine Grade Media Receiver with 2.3 Inch Dot Matrix Display A compact marine grade digital media receiver with a wet bonded 2.3 inch full dot matrix LCD display, 9H tempered glass screen, Bluetooth A2DP/AVRCP wireless streaming, AM/FM/WB tuner, AUX and USB inputs with USB charging, 7-band graphic EQ plus parametric EQ, and selectable high-pass, low-pass, and all-pass crossovers. IP6 marine grade front panel, ASTM B117 and D4329 tested, and compatible with the RF Connect iOS and Android app. Backed by a 2 year warranty. Product Overview The Rockford Fosgate PMX-1 is a Punch series marine grade digital media receiver purpose-built for demanding marine environments. The front panel carries an IP6 Marine Grade rating and has been tested to ASTM B117 (salt/fog) and ASTM D4329 (UV) standards, with full Element Ready protection against water, dust, UV radiation, temperature extremes, corrosion, and vibration throughout. The 2.3 inch full dot matrix LCD display uses wet bonded 9H tempered glass optically bonded to the panel, optimising readability under all lighting and viewing conditions including direct sunlight. Bluetooth 3.0+EDR with A2DP 1.3 and AVRCP provides stable wireless audio streaming from smartphones and devices, with easy pairing, extended range, and glitch-free playback. The AM/FM/WB tuner covers 18 FM, 12 AM, and 6 WB presets across multi-region radio frequencies. USB 2.0 input supports MP3 and WMA playback with 1A device charging. An RCA pair AUX input provides a wired analogue audio source option. Signal processing includes a 7-band graphic EQ with parametric EQ, independent subwoofer level control, and selectable high-pass, low-pass, and all-pass crossovers with selectable 12 or 24dB/octave slope. A voltage gauge with low voltage warning assists with vessel battery monitoring. The PMX-1 is compatible with the RF Connect iOS and Android app for native device control, and with the PMX-BTUR steering wheel remote accessory (sold separately). Maximum internal amplifier output is 25W x 4 at 4-ohm RMS (CEA-2006 rated) or 50W x 4 at 2-ohm maximum. Features & Benefits Wet Bonded 2.3 Inch Dot Matrix Display with 9H Tempered Glass: The full dot matrix LCD display is optically bonded behind 9H scratch-resistant tempered glass using a wet bonding process, eliminating the air gap that causes glare and condensation in standard marine displays and ensuring clear readability in all lighting and viewing conditions on the water. Bluetooth A2DP/AVRCP - Stable Wireless Streaming: Bluetooth 3.0+EDR with A2DP 1.3 and AVRCP provides high-quality wireless audio streaming with better range, easier device pairing, and glitch-free playback compared to earlier Bluetooth versions. AM/FM/WB Tuner with Multi-Region Frequencies: The built-in tuner covers AM (530-1710kHz), FM (87.9-107.9MHz), and Weather Band, with 18 FM, 12 AM, and 6 WB presets and multi-region frequency support for use across different markets and vessel locations. 7-Band Graphic EQ Plus Parametric EQ: The onboard 7-band graphic EQ and parametric EQ provide precise tonal control to compensate for the acoustic characteristics of different marine environments without requiring a separate signal processor. Selectable Crossovers with Selectable Slope: High-pass, low-pass, and all-pass crossover modes are selectable on the PMX-1, with slope adjustable between 12dB/octave and 24dB/octave Butterworth, giving flexibility for a wide range of speaker and subwoofer system configurations. IP6 Marine Grade Front Panel - ASTM Tested: The front panel carries an IP6 Marine Grade rating and has been tested to ASTM B117 (salt/fog) and ASTM D4329 (UV) standards, confirming resistance to the harshest marine environmental conditions. RF Connect App Compatible: The PMX-1 is compatible with the Rockford Fosgate RF Connect app on iOS and Android for native source unit control from a smartphone, providing an intuitive interface for volume, source, EQ, and tuner adjustment. Technical Specs Specification Detail SKU PMX-1 Device Type Digital Media Receiver Display 2.3 inch Full Dot Matrix LCD, Wet Bonded, 9H Tempered Glass Bluetooth 3.0+EDR, A2DP 1.3, AVRCP AM Tuner 530 - 1710 kHz / 40dB Sensitivity / 45Hz-2.4kHz Response FM Tuner 87.9 - 107.9 MHz / 8dB Sensitivity / 20Hz-15kHz Response Weather Band Yes (6 presets) Total Presets 18 FM / 12 AM / 6 WB Multi-Region Radio Yes AUX Input Yes (1 x RCA pair) USB Input Yes (USB 2.0) USB Charging Yes (1A output) Media Formats MP3, WMA Max Power Output (CEA-2006) 25W x 4 at 4-ohm RMS / 50W x 4 at 2-ohm MAX THD+N Less than 1.0% at 4-ohm Min Speaker Impedance 2 Ohm RCA Output Voltage 2V (Front / Rear / Sub) RCA Frequency Response 20 Hz - 20 kHz Signal to Noise Ratio RCA 2V: Greater than 85dB Channel Separation RCA: Greater than 70dB Output Impedance Less than 500 Ohm EQ 7-Band Graphic + Parametric Subwoofer Level Independent Control Crossover HP / LP / AP, Selectable 12 or 24dB/Octave Voltage Gauge Yes (with low voltage warning) App Control RF Connect (iOS and Android) Compatible Remote PMX-BTUR (sold separately) Front Panel Rating IP6 Marine Grade Multi-Zone/Multi-Source No SiriusXM Ready No Pandora No Operating Voltage 9 - 16 VDC Idle Current Less than 2A Fuse Rating 20A Certifications FCC, CE, EN60945, ASTM B117, ASTM D4329 Dimensions (W x H x Face Depth x Mount Depth) 115 x 106 x 38 x 86mm (4.5 x 4.2 x 1.5 x 3.38 inch) Back Panel Cutout 77mm (3 inch) Shipping Weight 0.55kg Warranty 2 Years Compatible With / Goes Well With The PMX-1 is suited to marine watercraft, pontoon boats, ski boats, and any vessel requiring a compact marine grade source unit. Its compact form factor with a 77mm back panel cutout makes it well suited to dash and console mounting positions with limited depth. It is compatible with the RF Connect app and the optional PMX-BTUR steering wheel remote. Goes Well With: PMX-BTUR - Rockford Fosgate steering wheel remote accessory for convenient in-hand control of the PMX-1 without reaching the mounted receiver M5-800X4 - M5 series 800W 4-channel marine amplifier for full system amplification beyond the PMX-1's internal 25W x 4 output M5-1500X5 - M5 series 1500W 5-channel marine amplifier for complete system builds including wake tower speakers and a marine subwoofer M2WL-8 / M2WL-8B - M2 series wake tower speakers for pairing with the PMX-1 in a full on-water audio system M2-8H - M2 series 8 inch Color Optix marine flush-mount speakers driven by the PMX-1 or a downstream marine amplifier Frequently Asked Questions What is the difference between wet bonded glass and a standard marine display? A standard marine display has an air gap between the LCD panel and the outer glass, which creates glare from reflections and allows condensation to form inside the display in humid marine environments. Wet bonding eliminates this air gap by optically bonding the 9H tempered glass directly to the LCD panel with a clear adhesive, improving clarity, reducing glare, and preventing internal condensation for a significantly more readable display on the water. Does the PMX-1 support SiriusXM satellite radio? No. The PMX-1 does not include SiriusXM-ready connectivity. It covers AM, FM, and Weather Band tuning plus Bluetooth streaming, USB, and AUX input for audio sources. What is the RF Connect app and does it require a separate connection? RF Connect is the Rockford Fosgate smartphone application for iOS and Android that provides native control of the PMX-1 including volume, source, EQ, crossover, and tuner functions from a paired smartphone. It connects via Bluetooth - no additional hardware is required beyond the Bluetooth pairing used for audio streaming. Can the PMX-1 power speakers directly without a separate amplifier? Yes. The PMX-1 has a built-in amplifier rated at 25W x 4 at 4-ohm RMS (CEA-2006), which is sufficient to power marine speakers directly in smaller installations. For higher output applications, the PMX-1's RCA outputs (2V) can be used to connect an external marine amplifier such as the M5-800X4 for significantly more power and headroom. Is the PMX-BTUR steering wheel remote included? No. The PMX-BTUR steering wheel remote is sold separately and is listed as a compatible accessory. The PMX-1 does not include a remote control in the box.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate PMX-2 Punch Marine Compact Digital Media Receiver Full Control, Built Marine Tough Product Overview The Rockford Fosgate PMX-2 is a compact AM/FM/WB digital media receiver purpose-built for marine and motorsport applications. Featuring a 2.7" full-colour TFT display optically wet bonded to eliminate dust and moisture penetration it delivers clear, readable visuals even under direct Australian sun. IPX6 rated and ISO8846/SAE J1171 ignition protection certified, the PMX-2 is engineered to handle the spray, heat, and vibration demands of open water and off-road environments without compromise. At its core, the PMX-2 is a fully featured command centre for any marine or powersport audio system. A 4 x 50W internal amplifier at 2 ohms handles smaller speaker setups directly, while front, rear, and subwoofer RCA preamp outputs allow seamless expansion with aftermarket amplifiers. Bluetooth audio streaming with A2DP and AVRCP support, Pandora internet radio, USB and AUX inputs, a 7-band graphic EQ, on-board Punch EQ control, and selectable crossovers with variable slope give you complete audio management in a single compact unit. Wired remote expansion via optional PMX-series cables makes it adaptable to virtually any vessel layout. Key Specifications Display: 2.7" full-colour TFT with auto-dimming backlight; optically wet bonded IPX6 marine grade rated ISO8846 / SAE J1171 ignition protection certified Internal amplifier: 4 x 50W @ 2 ohms Tuner: AM / FM / WB (Weather Band); multi-region radio frequencies Bluetooth: A2DP and AVRCP wireless streaming with album art support Inputs: USB (with charging), AUX Outputs: Front RCA, Rear RCA, Subwoofer RCA Crossover: Selectable HP / LP / AP with selectable slope 12 / 24 dB/octave EQ: 7-band graphic EQ + on-board Punch EQ control Certifications: FCC, CE, IC, C-Tick Zone control: 1 zone / 1 source (F/R or Sub) Features & Benefits IPX6 marine grade rating: Protected against powerful water jets from any direction. Suitable for open boats, jet skis, and powersport applications where spray and rain are unavoidable on Australian waterways. 2.7" optically wet bonded full-colour TFT display: The wet bonding process eliminates the air gap between the display layers, preventing fogging, dust infiltration, and moisture ingress. Auto-dimming backlight ensures readability from direct sun to night running. ISO8846 / SAE J1171 ignition protection certified: Meets internationally recognised marine ignition protection standards, reducing the risk of ignition in fuel-vapour environments critical for petrol-powered vessels. 4 x 50W internal amplifier @ 2 ohms: Enough output to drive a set of marine speakers directly without an external amplifier. When more power is needed, front, rear, and subwoofer RCA outputs allow straightforward amplifier integration. Bluetooth A2DP and AVRCP streaming with album art: Stream audio wirelessly from smartphones and compatible devices with full playback control and album art display. Ideal for helm-mounted use where keeping a phone out of spray is preferred. Pandora internet radio and iPod playback: Broad source compatibility for Australian users, supporting popular streaming and device playback with on-screen display controls. 7-band graphic EQ and on-board Punch EQ: Precise audio tuning without an external processor. Dial in the right sound for open-air marine environments where acoustics differ significantly from enclosed vehicle cabins. Selectable HP / LP / AP crossovers with 12 / 24 dB/octave slope: Flexible crossover control for full-range, mid, and subwoofer speaker management from a single head unit. Reduces the need for additional signal processors. Independent subwoofer level control: Adjust bass output separately from the main volume without diving into menus convenient at the helm during use. Water-resistant rotary encoder knob with white LED illumination: Tactile, reliable volume and control operation in wet conditions, with clear visibility for night use on the water. USB input with charging: Charge devices while playing audio. Keeps phones and navigation devices topped up during longer runs. Wired remote expansion capability: Compatible with optional PMX-series extension cables and remotes (PMX-1R, PMX-0R) for mounting secondary controls at a second helm station or convenient location on the vessel. EEPROM memory system: Retains settings and station presets even after power is disconnected useful on vessels where battery isolation is standard practice. Custom GUI interface: User-configurable display interface for a personalised look and easier day-to-day operation. Low voltage warning alert: Notifies you when system voltage drops below safe operating levels, protecting your vessel's battery and electronics during extended use. Multi-region radio frequencies: Supports radio frequency ranges across multiple regions, making the PMX-2 suitable for Australian-market use out of the box. Technical Specs Specification Detail SKU PMX-2 Brand Rockford Fosgate Display 2.7" full-colour TFT; optically wet bonded; auto-dimming backlight IPX Rating IPX6 Ignition Protection ISO8846 / SAE J1171 certified Internal Amplifier 4 x 50W @ 2 ohms Tuner AM / FM / WB (Weather Band) Radio Frequencies Multi-region Bluetooth A2DP + AVRCP (album art support) Pandora Yes iPod Playback Yes (on-screen display) Inputs USB (with charging), AUX Signal Outputs Front RCA, Rear RCA, Subwoofer RCA Crossover Selectable HP / LP / AP; 12 / 24 dB/octave slope EQ 7-band graphic EQ + on-board Punch EQ Subwoofer Level Control Independent; front-mounted Zone Control 1 zone / 1 source (F/R or Sub) Control Knob Water-resistant rotary encoder; white LED illumination Memory EEPROM GUI Custom interface Low Voltage Warning Yes Remote Expansion Yes compatible with PMX-series remotes and extension cables Antenna Not included Certifications FCC, CE, IC, C-Tick, ISO8846, SAE J1171 Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Rockford Fosgate PMX-1R Punch Marine wired remote Rockford Fosgate PMX-0R Punch Marine remote Rockford Fosgate PMX10C, PMX16C, PMX25C extension cables Rockford Fosgate Punch and Prime marine amplifiers (via RCA preamp outputs) Rockford Fosgate marine subwoofers and full-range marine speakers Marine vessels: bow riders, pontoons, centre console fishing boats, ski boats, and tinnies Powersport applications: UTVs, side-by-sides, dune buggies, and off-road 4WDs Smartphones and Bluetooth-enabled devices (A2DP/AVRCP streaming) iPod and compatible Apple devices (via USB) Frequently Asked Questions Is the PMX-2 suitable for open-water marine use in Australia? Yes. The PMX-2 is IPX6 rated and ISO8846/SAE J1171 ignition protection certified, making it suitable for open boats, jet skis, and powersport applications exposed to spray, rain, and marine fuel-vapour environments. Does the PMX-2 have enough power to run speakers without an external amplifier? Yes. The built-in 4 x 50W amplifier at 2 ohms can drive marine speakers directly. For higher output or subwoofer integration, front, rear, and subwoofer RCA outputs allow connection to aftermarket amplifiers. Can I control the PMX-2 from a second location on my vessel? Yes. The PMX-2 supports wired remote expansion via optional PMX-series remotes (PMX-1R, PMX-0R) and extension cables (PMX10C, PMX16C, PMX25C), allowing secondary control from a second helm station or convenient mounting point. Does the PMX-2 support Bluetooth streaming from a smartphone? Yes. The PMX-2 features A2DP and AVRCP Bluetooth, supporting wireless audio streaming with full playback control and album art display from compatible smartphones and devices. Is an antenna included with the PMX-2? No. A compatible marine AM/FM/WB antenna is required for tuner functionality and must be purchased separately. Confirm antenna compatibility with your supplier or installer prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

CANbus Display Interface Module NMEA2K, PMX-8BB Compatible, MFD Control of Audio Functions Including Zone Volume, EQ, Bluetooth, SiriusXM, and USB. Plug and Play. The Rockford Fosgate PMX-CAN is a CANbus interface module connecting the PMX-8BB marine source unit to Multi-Function Display (MFD) systems using the NMEA2K entertainment standard. Larger marine entertainment systems are typically centred around an MFD unit the PMX-CAN translates NMEA2K commands from the MFD into PMX-8BB controls, enabling full audio management from the helm display without physically accessing the source unit. Supported functions cover both basic and advanced control: power on/off, input source selection, play/pause, track/tune/seek up/down, master/subwoofer/zone volume, zone source selection and renaming, balance/fade, EQ preset adjustment, and filter frequency adjustment. Source-specific functions are available for radio, Bluetooth, Pandora, SiriusXM, and USB. Key Specifications Specification Detail Part Number PMX-CAN Type CANbus Display Interface Module Compatible Source Unit PMX-8BB ✓ Protocol NMEA2K (NMEA 2000) ✓ Installation Plug and play ✓ Compatible MFDs Select NMEA2K MFD partners — confirm list from official product page Dimensions Not specified Warranty Not specified Supported Control Functions Function Category Functions Power On/Off ✓ Source Input selection, zone source selection and renaming ✓ Playback Play/Pause, Track/Tune/Seek Up/Down ✓ Volume Master, Subwoofer, Zone volume control ✓ Audio Balance/Fade, EQ Preset, Filter Frequency ✓ Source-Specific Radio, Bluetooth, Pandora, SiriusXM, USB ✓ Features & Benefits NMEA2K MFD Integration — Enables the helm MFD to become the primary audio control interface — keeping hands on the helm and eyes on the water without reaching to a separately mounted source unit. Full Audio Control from MFD — Not just basic playback — the PMX-CAN exposes zone volume, EQ presets, filter frequency, balance/fade, and source-specific functions (Bluetooth track data, Pandora skipping, SiriusXM channel control, USB browsing) to the MFD interface. Zone Audio Management — Multi-zone systems can have each zone's source and volume controlled independently from the MFD — including zone renaming for custom labelling in the MFD interface. Plug and Play PMX-8BB Connection — Designed for direct connection to the PMX-8BB hideaway digital receiver without additional wiring adaptation. FAQs What is NMEA2K (NMEA 2000)? NMEA 2000 is a marine electronics communications standard used by MFD systems from manufacturers including Garmin, Raymarine, Simrad, and Lowrance. It allows certified marine devices to communicate over a shared backbone network. The PMX-CAN allows the PMX-8BB to appear as a controllable audio device on the NMEA 2000 network. Which MFD brands and models are compatible? The product description references "select MFD partners" using the NMEA2K entertainment standard. Confirm the specific list of compatible MFD brands and models from the official Rockford Fosgate PMX-CAN product page before purchasing — not all NMEA2K-capable MFDs may support the entertainment control profile. Does the PMX-CAN work with any Rockford Fosgate marine receiver? The PMX-CAN is confirmed compatible with the PMX-8BB hideaway digital receiver. Confirm compatibility with any other PMX series source units from the official product documentation. Can I control Bluetooth and SiriusXM through my MFD? Yes — source-specific controls for Bluetooth, SiriusXM, Pandora, and USB are confirmed as available via the PMX-CAN interface. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate PMX10C Punch Marine 10ft Extension Cable Short Run, Perfect Fit Product Overview The Rockford Fosgate PMX10C is a 10-foot (approximately 3.0 metre) extension cable designed to extend the reach of compatible Punch Marine remote controllers and display heads. Purpose-built for use with the PMX-8DH, PMX-1R, and PMX-0R, it gives you the additional length needed to mount your remote or display head in a more accessible location without the excess cable bulk of longer extension options. The PMX10C is the shortest cable in the Punch Marine extension range, making it the ideal choice for smaller vessels, compact powersport installations, and tight routing situations where a precise, neat cable run is the priority. Like all PMX extension cables, it is plug-and-play no cutting, splicing, or custom wiring required. Key Specifications Cable length: 10 feet (approximately 3.0 metres) Compatible with: PMX-8DH, PMX-1R, PMX-0R Application: Marine remote controller and display head extension Plug-and-play installation no cutting or splicing required Shortest cable option in the Rockford Fosgate Punch Marine extension range Features & Benefits 10-foot cable length: Provides approximately 3.0 metres of additional reach. The most compact option in the PMX extension cable range, ideal for smaller vessels and short routing distances where longer cables would create unnecessary bulk. Compatible with PMX-8DH, PMX-1R, and PMX-0R: Direct-fit accessory for Rockford Fosgate Punch Marine remotes and display heads. No adapters, splicing, or modifications required. Plug-and-play design: Connects directly between the source unit and compatible remote or display head. Clean, straightforward installation for DIY builders and professional installers alike. Purpose-built for marine environments: Part of the Rockford Fosgate Punch Marine accessory ecosystem, engineered for reliable signal transmission through the moisture, heat, and vibration conditions typical of Australian watercraft and powersport applications. Cleaner install on smaller vessels: Less cable to manage means a tidier, more professional-looking installation on jet skis, small tinnies, kayaks with audio systems, and compact UTVs. Technical Specs Specification Detail SKU PMX10C Brand Rockford Fosgate Cable Length 10 feet (approx. 3.0 metres) Compatible Devices PMX-8DH, PMX-1R, PMX-0R Installation Type Plug-and-play Application Marine remote/display head extension Connector Type Not specified confirm with supplier Warranty Confirm with supplier Compatible With Rockford Fosgate PMX-8DH Punch Marine digital media receiver Rockford Fosgate PMX-1R Punch Marine wired remote Rockford Fosgate PMX-0R Punch Marine remote Rockford Fosgate PMX16C and PMX25C extension cables (where a longer run is required) Smaller marine vessels: jet skis, tinnies, kayaks with audio systems, and small runabouts Compact powersport applications: ATVs, UTVs, and side-by-sides with short source-unit-to-dash distances Frequently Asked Questions What devices is the PMX10C compatible with? The PMX10C is confirmed compatible with the Rockford Fosgate PMX-8DH, PMX-1R, and PMX-0R. If you are unsure whether it suits your specific Punch Marine setup, confirm with your supplier before ordering. How long is the PMX10C extension cable? The PMX10C is 10 feet in length, which is approximately 3.0 metres making it the shortest and most compact option in the Rockford Fosgate Punch Marine extension cable range. How does the PMX10C compare to the PMX16C and PMX25C? The PMX10C is the shortest of the three options at approximately 3.0 metres. Choose the PMX16C (approx. 4.9 metres) or PMX25C (approx. 7.6 metres) if your installation requires a longer cable run between the source unit and remote mounting location. Does the PMX10C require any cutting or special wiring? No. The PMX10C is a plug-and-play extension cable that connects directly between your Rockford Fosgate source unit and compatible remote or display head without cutting, splicing, or modification. Is the PMX10C suitable for permanent marine installation? Yes. The PMX10C is part of the Rockford Fosgate Punch Marine accessory range, designed for the moisture and vibration conditions common in marine environments. Secure and route the cable carefully during installation to protect it from abrasion and water ingress. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less