Punch Pro Passive Crossover 125W RMS, 3kHz 6dB/Octave Low-Pass, Dual Woofer Outputs, Selectable Tweeter Attenuation. For Punch Pro Speakers Only. Sold Individually. Product Overview The Rockford Fosgate Punch Pro PP4-X is a passive crossover unit designed exclusively for use with Rockford Fosgate Punch Pro 4-Ohm midrange drivers and tweeters it is not a universal crossover and is not compatible with other brands or other Rockford Fosgate series. The PP4-X must be used in conjunction with the built-in 6dB/octave high-pass crossover in the Punch Pro tweeter the two crossovers work as a system to divide the frequency spectrum between the woofer and tweeter outputs. The PP4-X handles the woofer channel: it provides a 6dB/octave low-pass filter at 3kHz to two woofer outputs, limiting the frequency content delivered to the Punch Pro midrange drivers. Selectable tweeter impedance (4-Ohm or 8-Ohm) and tweeter attenuation (0dB, -3dB, -6dB) allow the system's tweeter level to be adjusted relative to the midrange output accommodating different installation positions and sensitivity matching requirements. Rated at 125W RMS (250W peak), the PP4-X matches the power handling of the Punch Pro midrange driver. Sold as an individual unit. Key Specifications Part type: Passive crossover Compatible with: Rockford Fosgate Punch Pro 4-Ohm speakers only Power handling (RMS): 125W Power handling (peak): 250W Woofer impedance: 4-Ohm (required) Woofer outputs: 2 (dual — for two Punch Pro midrange drivers) Low-pass filter: 6dB/octave at 3kHz Tweeter high-pass: Provided by built-in PP4-T tweeter crossover (not in PP4-X) Tweeter impedance selector: 4-Ohm or 8-Ohm Tweeter attenuation selector: 0dB, -3dB, -6dB Mounting hardware: Included Sold as: Individual unit (not a pair) Dimensions: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 3kHz 6dB/Octave Low-Pass Filter for Woofer Outputs — The PP4-X delivers a 6dB/octave low-pass filter at 3kHz to the woofer channel outputs — limiting the frequency content sent to the Punch Pro midrange drivers to below 3kHz. This protects the midrange driver from high-frequency content above its optimal operating range and works in conjunction with the built-in 6dB/octave high-pass in the PP4-T tweeter to create a complete 2-way crossover system. Dual Woofer Outputs — Two woofer output terminals allow a single PP4-X to drive two Punch Pro midrange drivers from one channel — a common SPL and competition front stage configuration where two 8" midrange drivers (such as the PPS4-8) are mounted per side for increased midrange output. Selectable Tweeter Impedance — 4-Ohm or 8-Ohm — A switch selects whether the tweeter output is configured for a 4-Ohm or 8-Ohm tweeter impedance — allowing the PP4-X to accommodate different Punch Pro tweeter configurations within the same system. Selectable Tweeter Attenuation — 0dB, -3dB, -6dB — Three attenuation levels allow the tweeter output to be adjusted relative to the midrange level — compensating for the sensitivity difference between the tweeter and midrange drivers or for installation positions where the tweeter is closer to the listening position and would otherwise sound too prominent. 125W RMS / 250W Peak Power Handling — Matched to the power handling of the Punch Pro midrange driver range, the PP4-X safely handles 125W RMS — appropriate for use with the high-output amplifiers typical in SPL-oriented systems. Designed Exclusively for Punch Pro 4-Ohm Speakers — The PP4-X is not a universal passive crossover. It is engineered for the specific impedance and crossover topology of the Rockford Fosgate Punch Pro 4-Ohm speaker range — using the PP4-T tweeter's built-in 6dB/octave crossover as part of the complete system design. Using the PP4-X with non-Punch Pro or non-4-Ohm speakers will produce incorrect frequency division and impedance loading. Sold Individually — One PP4-X per purchase. For a stereo front stage installation, two PP4-X units are required — one per channel. Technical Specs Specification Detail Brand Rockford Fosgate Part Number PP4-X Series Punch Pro Part Type Passive Crossover Compatible With Rockford Fosgate Punch Pro 4-Ohm speakers only Power Handling (RMS) 125W ✓ Power Handling (Peak) 250W ✓ Woofer Impedance 4-Ohm (required) ✓ Woofer Outputs 2 (dual) ✓ Low-Pass Filter 6dB/Octave at 3kHz ✓ Tweeter HP Via built-in PP4-T crossover (not in this unit) Tweeter Impedance Select 4-Ohm / 8-Ohm ✓ Tweeter Attenuation 0dB / -3dB / -6dB ✓ Mounting Hardware Included ✓ Sold As Individual Unit (not a pair) ✓ Dimensions Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Designed exclusively for: Rockford Fosgate Punch Pro 4-Ohm midrange drivers (e.g. PPS4-8) Rockford Fosgate Punch Pro 4-Ohm tweeters with built-in 6dB/octave HP (e.g. PP4-T) Pairs with: Rockford Fosgate PP4-T Punch Pro 1.5" tweeter (provides the HP crossover side) Rockford Fosgate PPS4-8 Punch Pro 8" midrange/midbass (one or two per woofer output) High-output amplifiers for SPL front stage use Frequently Asked Questions What does the PP4-X do and what does it not do? The PP4-X provides the low-pass (woofer) side of a 2-way passive crossover system — filtering frequencies above 3kHz away from the midrange driver outputs. It does not provide a high-pass filter for the tweeter; the tweeter's high-pass filter is built into the Punch Pro tweeter unit. Both crossovers must be used together for the complete system to operate correctly. Can I use the PP4-X with non-Rockford Fosgate speakers? No. The PP4-X is specifically engineered for the Punch Pro 4-Ohm speaker topology and relies on the built-in crossover in the Punch Pro tweeter for the tweeter channel. It will not function correctly with other brand speakers or other Rockford Fosgate series. What is the low-pass crossover frequency? 3kHz — confirmed. The PP4-X provides a 6dB/octave low-pass filter at 3kHz for the woofer outputs. Above 3kHz, the output to the midrange drivers rolls off at 6dB per octave. Why are there two woofer outputs? The dual woofer outputs allow a single PP4-X to drive two Punch Pro midrange drivers from one amplifier channel — a configuration used in high-SPL front stage builds where two midrange drivers are mounted per side for increased output. Each output is rated for a 4-Ohm load — confirm the total impedance configuration with Rockford Fosgate when using both outputs simultaneously. What does the tweeter attenuation selector do? The 0dB, -3dB, and -6dB settings reduce the output level to the tweeter relative to the midrange. This compensates for sensitivity differences between the tweeter and midrange driver, and for installation positions where the tweeter is closer to the listening position and would otherwise produce more prominent treble than intended. Set the attenuation level during system setup based on listening tests. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

1.5" Punch Pro SPL Tweeter Aluminium Diaphragm, Billet Machined Phase Plug, Die-Cast Aluminium Housing, Built-In 6dB/Octave Crossover. Sold Individually. Product Overview The Rockford Fosgate Punch Pro PP4-T is a 1.5" 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) applications competition car audio builds, high-output SPL-oriented systems, and any installation where tweeter sensitivity, power handling, and mechanical robustness take priority. It is sold as an individual unit, not a pair. The PP4-T uses an aluminium diaphragm rather than the PEI or fabric dome materials used in standard Punch and Prime series tweeters producing a stiffer, lighter diaphragm with high sensitivity. A billet machined aluminium phase plug controls high-frequency dispersion from the diaphragm face, and a die-cast aluminium housing provides structural rigidity that pressed steel cannot match. A High Temp Kapton voice coil former is engineered to withstand the sustained high temperatures generated during high-SPL operation. A built-in 6dB/octave high-pass crossover is integrated into the unit. Key Specifications Tweeter size: 1.5 inch Impedance: 4-Ohm Power handling (RMS): 50W (confirmed in description) Diaphragm material: Aluminium Phase plug: Billet machined aluminium Voice coil former: High Temp Kapton Housing: Die-cast aluminium Input terminals: All-metal spring terminal Crossover: Built-in 6dB/octave high-pass Crossover point: Not specified — confirm with Rockford Fosgate Application: High SPL Mounting hardware: Included Sold as: Individual unit (not a pair) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Aluminium Diaphragm — The aluminium dome diaphragm is lighter and stiffer than soft dome or PEI materials — producing high sensitivity and a very fast, controlled high-frequency response suited to high SPL conditions where the tweeter must keep pace with high-output woofers and amplifiers. Aluminium domes produce a bright, forward, detailed treble character. Billet Machined Aluminium Phase Plug — The phase plug is machined from solid billet aluminium rather than cast or stamped — sitting at the centre of the diaphragm to control the dispersion pattern of high-frequency output and reduce distortion caused by uncontrolled centre-cavity resonance. Billet machining produces a tighter dimensional tolerance than casting. Die-Cast Aluminium Housing — The housing is die-cast aluminium rather than pressed steel or injection-moulded plastic — providing the structural rigidity and heat dissipation characteristics appropriate for a high-power, high-SPL tweeter operating in sustained competition conditions. High Temp Kapton Voice Coil Former — Kapton (polyimide film) is the industry-standard high-temperature voice coil former material, chosen for its ability to maintain dimensional stability and mechanical integrity at the elevated temperatures produced by sustained high-power operation — a critical reliability requirement for SPL-oriented applications. Built-In 6dB/Octave High-Pass Crossover — An integrated 6dB/octave high-pass crossover is built into the tweeter unit — filtering low-frequency content that could damage the 1.5" diaphragm. Crossover point (Hz) is not confirmed in the supplier data — pull from the official Rockford Fosgate PP4-T datasheet. All-Metal Input Spring Terminal — Metal spring terminals provide a secure, vibration-resistant connection that does not corrode or loosen under the mechanical stress of high-SPL operation. Oversized Motor Structure — An oversized motor provides greater magnetic flux for the voice coil — contributing to the high sensitivity and power handling characteristics of the PP4-T. Sold Individually — The PP4-T is sold as a single unit. Two units must be purchased for a stereo left/right tweeter installation. Technical Specs Specification Detail Brand Rockford Fosgate Part Number PP4-T Series Punch Pro Tweeter Size 1.5 inch Impedance 4-Ohm ✓ Power Handling (RMS) 50W ✓ (description)  Diaphragm Aluminium Phase Plug Billet Machined Aluminium Voice Coil Former High Temp Kapton Housing Die-Cast Aluminium Input Terminals All-Metal Spring Terminal Crossover Built-in 6dB/Octave HP Crossover Point Not specified — confirm with Rockford Fosgate Application High SPL Mounting Hardware Included Sold As Individual unit (not a pair) ✓ Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Mounting Depth Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable applications: High SPL and competition car audio builds requiring a robust, high-power tweeter Front stage systems paired with high-output amplifiers and woofers Installations where tweeter sensitivity and sustained power handling are the priority Pairs well with: High-output 4-channel amplifiers for front stage (T400-4, T600-4, or T1000-4AD) High SPL woofers matched to the tweeter's operating range Frequently Asked Questions Is the PP4-T sold as a pair? No — the PP4-T is explicitly sold as an individual unit. Two units must be purchased separately for a stereo left/right installation. What is an aluminium diaphragm tweeter and how does it differ from a PEI or soft dome? An aluminium dome diaphragm is stiffer and lighter than PEI (rigid thermoplastic) or soft dome (fabric/silk) materials. This produces high sensitivity and fast, precise high-frequency response — well-suited to high SPL conditions where maximum output and impact are priorities. Aluminium domes typically have a bright, forward treble character that suits SPL and competition applications. What is the confirmed power handling for the PP4-T? The product description confirms 50W RMS. The product title states 100W, which most likely represents the peak power rating. The 50W RMS figure has been used throughout this listing as the confirmed sustained power rating. Confirm the full 50W RMS / 100W peak interpretation with Rockford Fosgate before publishing. What does the billet machined aluminium phase plug do? The phase plug sits at the centre of the tweeter diaphragm and controls the dispersion of high-frequency output — preventing uncontrolled resonance in the cavity behind the dome and improving the evenness of the tweeter's off-axis frequency response. Billet machining produces tighter dimensional tolerances than casting, contributing to more consistent acoustic performance. What is a Kapton voice coil former? Kapton is a polyimide film from DuPont, widely used as a voice coil former material in high-power speaker drivers. It maintains dimensional stability and mechanical integrity at the elevated temperatures generated during sustained high-power operation — important for a tweeter designed for high SPL applications where heat build-up can be significant. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stream Music from Your Smartphone or Tablet Through Your Car's Speakers iSimple AUX Flush Mount Kit The low profile auxiliary input keeps factory look to vehicle interior. Connector labeled Audio Input, Connects to most audio sources. Legendary Products & Support From Authorized Dealers When you choose iSimple, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized iSimple dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by iSimple's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized iSimple dealer today!

Read more less

Universal Inline RCA Audio Level Control Audio Taper Potentiometer, Four Mounting Configurations: Panel Mount, Under-Dash Bracket, Rocker Switch with 3.5mm AUX, and Flush Panel Mount. Mobile, Marine, and Off-Road Compatible. Product Overview The Rockford Fosgate PLC-U is a universal inline stereo RCA level control designed to vary the signal level of any stereo pair of RCA cables independently of a master volume control. The high-quality audio taper potentiometer provides true linear level control across the entire knob range suited to subwoofer level adjustment, zone volume control, or anywhere a dedicated RCA signal path requires independent level management. The PLC-U ships with four mounting configurations covering the widest range of vehicle installation scenarios: standard 1" panel mount (large or small knob), universal under-dash bracket, rocker switch mount with integrated 3.5mm AUX-to-RCA extension port, and a disassembled rocker switch configuration for smaller flush panel mounting. Compatible with source units, line drivers, and amplifiers. Suitable for mobile, marine, and off-road applications. Key Specifications Part number: PLC-U Type: Inline stereo RCA audio level control ✓ Control: Audio taper potentiometer (linear) ✓ Signal path: Stereo RCA pair (inline) ✓ Mounting configurations: 4 ✓ Panel mount: 1" (25.4mm) hole, retaining nut, large and small knob options ✓ Under-dash bracket: Universal, used with panel mount unit ✓ Rocker switch mount: Integrated 3.5mm to RCA extension port ✓ Flush mount: Rocker switch disassembled for smaller-hole installation ✓ Rocker switch knockout: Fits standard vehicle rocker switch panel knockouts ✓ Compatible with: Source units, line drivers, amplifiers ✓ Applications: Mobile, marine, off-road ✓ Input/output impedance: Not specified — confirm with Rockford Fosgate Cable lengths: Not specified — confirm with Rockford Fosgate Dimensions: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Audio Taper Potentiometer — True Linear Level Control The audio taper (logarithmic) potentiometer matches the non-linear sensitivity of human hearing — producing a level change that feels linear across the entire knob rotation, rather than changing rapidly at the lower end of the range as a standard linear potentiometer does. This provides precise, usable level adjustment from minimum to maximum. Panel Mount — 1" Hole, Large and Small Knob Installs in a standard 1" panel hole (same as the PAUX) with a threaded retaining nut. Two knob size options are included — large for easy manual adjustment during driving, small for a more discreet installation. The panel mount version is the primary configuration for dedicated level control locations on the dash or console. Universal Under-Dash Bracket When a panel cut-out is not preferred or clearance behind the panel is limited, the universal under-dash bracket holds the panel mount unit in an accessible under-dash position without requiring a hole. Rocker Switch Mount with 3.5mm AUX Extension The rocker switch configuration fits standard vehicle rocker switch panel knockouts (common in trucks, SUVs, and 4WDs with unused accessory switch positions). The integrated 3.5mm-to-RCA extension port adds AUX input capability at the same location — combining level control and device connectivity in a single rocker switch position. Flush Panel Mount via Disassembly Disassembling the rocker switch housing allows the level control potentiometer to be surface-mounted using a smaller hole than the 1" panel mount requires — enabling installation in locations where neither the 1" hole nor the full rocker switch knockout is available. Stereo RCA Inline — Universal System Compatibility Inline on any stereo pair of RCA cables — works with any source unit, line driver, or amplifier with RCA connections. Compatible with the full Rockford Fosgate RFI, RFIT, RFIY, and RFITY cable and adapter range. Technical Specs Specification Detail Brand Rockford Fosgate Part Number PLC-U Series Punch Type Inline Stereo RCA Level Control ✓ Control Audio Taper Potentiometer ✓ Signal Path Stereo RCA pair (inline) ✓ Mounting Options 4 configurations ✓ Panel Mount Hole 1 inch (25.4mm) ✓ Panel Mount Knobs Large and Small included ✓ Panel Mount Security Threaded retaining nut ✓ Under-Dash Bracket Universal, included ✓ Rocker Switch Mount Integrated 3.5mm to RCA extension ✓ Flush Mount Via rocker switch disassembly ✓ Rocker Knockout Fit Standard vehicle rocker switch positions ✓ Applications Mobile, Marine, Off-Road ✓ Input/Output Impedance Not confirmed Cable Lengths Not confirmed Dimensions Not confirmed Warranty Not confirmed Compatible With / Goes Well With Suitable for: Subwoofer level adjustment from an accessible dash or console location Zone volume control for secondary RCA output channels Any stereo RCA signal path requiring independent level management Marine, UTV, motorcycle, and off-road audio systems (marine-suitable application confirmed) Pairs well with: Rockford Fosgate RFI or RFIT series RCA cables (inline on the signal path) Rockford Fosgate TM750X1bd or TM1000X5ad marine amplifiers Rockford Fosgate RF-HLC or RF-HLC4 LOC units (downstream level control) Rockford Fosgate PAUX (the rocker switch AUX port extends similar functionality from a single mounting position) Frequently Asked Questions What is an audio taper potentiometer and why does it matter for level control? An audio taper (also called logarithmic) potentiometer is designed to match the non-linear sensitivity of human hearing — which perceives loudness changes logarithmically, not linearly. At any position on the knob, the level change feels proportional and smooth. A standard linear potentiometer would make most of its audible change in the first 20% of knob rotation, making fine adjustment difficult. Can the PLC-U be used as a subwoofer level control? Yes — the PLC-U controls the signal level on any inline stereo RCA pair. For subwoofer level adjustment, connect it inline on the RCA cable between the head unit or crossover output and the subwoofer amplifier input. Which mounting option suits a standard truck or 4WD with rocker switch panels? The rocker switch mount configuration — it fits standard vehicle rocker switch panel knockouts that are common in utes, trucks, and 4WDs. The integrated 3.5mm-to-RCA extension port adds AUX input capability at the same switch position, making this configuration particularly practical for dual-function installations. Does the PLC-U work in marine installations? Yes — the PLC-U is confirmed suitable for mobile, marine, and off-road applications. The rocker switch mounting option is particularly useful in marine helm consoles that feature standard rocker switch panel arrays. Is the PLC-U the same as the PLC2 remote mentioned in the amplifier listings? No — the PLC2 is a dedicated bass remote level control specific to compatible Rockford Fosgate amplifiers (including the TM750X1bd and TM1000X5ad). The PLC-U is a universal inline RCA level control that works with any amplifier or source — it is not amplifier-specific and does not require amplifier compatibility. Both provide level adjustment, but from different points in the signal chain. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

"Get Connected" with Our Range of Cables, Leads and Adaptors Aerpro Patch Leads Are Custom Made to Connect Your Chosen Brand of Headunit to The Steering Wheel Control Adapter. Filter by "Patch Lead Type" to Match the Correct Steering Wheel Control Adapter. Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Rockford Fosgate PEQ Remote Punch EQ Bass and Treble Control from the Dash, Built for 2007+ Punch & Power Amplifiers Product Overview The Rockford Fosgate PEQ is a wired remote Punch equalisation controller designed for select 2007 and newer Rockford Fosgate Punch and Power amplifiers. Providing remote control of both bass and treble boost from a convenient dash, console, or glovebox mounting location, the PEQ gives the driver real-time tonal adjustment without accessing the amplifier particularly useful in systems where the amplifier is mounted in the boot, under the seat, or in another location where in-car adjustment is impractical. The PEQ offers up to +18 dB of bass boost at 45 Hz the signature Rockford Fosgate Punch EQ frequency and up to +12 dB of treble boost at 12.5 kHz, with bass and treble filtering behaviour determined by the in-board amplifier crossover setting. On 4-channel amplifiers, the PEQ controls bass on the rear outputs. The complete installation kit includes the bass/treble knob unit, cable, mounting clip, and mounting screws everything needed for a clean dash or console installation. Key Specifications Type: Wired remote bass and treble EQ controller Bass boost: 0 dB to +18 dB @ 45 Hz Treble boost: 0 dB to +12 dB @ 12.5 kHz Filter behaviour: Based on in-board amplifier crossover setting (HP / LP / AP) 4-channel amplifier use: Controls bass on rear outputs Compatible amplifiers: Select 2007 and newer Rockford Fosgate Punch and Power amplifiers Mounting options: Under-dash / centre console / glovebox Kit contents: Bass/treble knob unit, cable, mounting clip, mounting screws Cable length: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Remote bass boost 0 dB to +18 dB @ 45 Hz: The signature Rockford Fosgate Punch EQ frequency, adjustable from flat to a maximum +18 dB boost at 45 Hz from the driver's seat. Adjust bass emphasis on the fly to suit music genre, road noise, and passenger preference without leaving the seat or accessing the amplifier. Remote treble boost 0 dB to +12 dB @ 12.5 kHz: Independent treble boost control up to +12 dB at 12.5 kHz, complementing the bass control for comprehensive tonal adjustment from a single remote unit. Useful for compensating for high-frequency loss at elevated listening volumes or in acoustically challenging vehicle cabin environments. Filter behaviour linked to in-board amplifier crossover: The PEQ's bass and treble filtering operates in conjunction with the amplifier's internal crossover setting HP (high-pass), LP (low-pass), or AP (all-pass). This ensures the remote EQ adjustments remain appropriate to the speaker configuration connected to the amplifier rather than boosting frequencies outside the speaker's operating range. Controls rear output bass on 4-channel amplifiers: When used with a compatible 4-channel Rockford Fosgate Punch or Power amplifier, the PEQ provides dedicated bass control of the rear channel outputs useful for systems where the rear channels drive subwoofers or bass-emphasis speakers independently of the front channels. Convenient remote mounting under-dash, console, or glovebox: The compact PEQ unit installs cleanly under the dashboard, inside the centre console, or in the glovebox using the included mounting clip and screws  keeping the driver's reach-zone tidy while providing accessible real-time tonal control. Complete installation kit included: Bass/treble knob unit, cable, mounting clip, and mounting screws are all included. No additional accessory purchases required for a clean installation in most standard Australian vehicles. Wired reliability: A hardwired connection to the amplifier provides consistent, noise-free signal transmission without the latency or pairing issues of wireless remote solutions appropriate for a signal-path EQ control where accuracy and consistency matter. Technical Specs Specification Detail SKU PEQ Brand Rockford Fosgate Type Wired remote bass and treble EQ controller Bass Boost 0 dB to +18 dB @ 45 Hz Treble Boost 0 dB to +12 dB @ 12.5 kHz Filter Behaviour Based on in-board amplifier crossover (HP / LP / AP) 4-Channel Use Controls bass on rear outputs Compatible Amplifiers Select 2007 and newer Rockford Fosgate Punch and Power amplifiers Mounting Options Under-dash / centre console / glovebox Kit Contents Bass/treble knob, cable, mounting clip, mounting screws Cable Length Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Select 2007 and newer Rockford Fosgate Punch series amplifiers with PEQ input Select 2007 and newer Rockford Fosgate Power series amplifiers with PEQ input Amplifier installations where the amplifier is mounted in the boot, under the seat, or in another location away from the driver 4-channel amplifier builds where independent rear output bass control is required Vehicles where real-time tonal adjustment from the driver's position is a priority Frequently Asked Questions Which amplifiers is the PEQ compatible with? The PEQ is designed for select 2007 and newer Rockford Fosgate Punch and Power amplifiers. Not all amplifiers in these ranges include a PEQ input confirm that your specific amplifier model has a dedicated PEQ connector with your supplier before purchasing. What is the difference between the PEQ and the PLC2 remote level control? The PLC2 is a single-function remote subwoofer level control it adjusts output level only. The PEQ provides both bass boost (0 dB to +18 dB @ 45 Hz) and treble boost (0 dB to +12 dB @ 12.5 kHz) from a single wired remote unit, making it a more comprehensive tonal control solution. Confirm which remote accessory is compatible with your specific amplifier model before purchasing. How does the PEQ's filter behaviour interact with the amplifier's crossover? The PEQ's bass and treble boost operates within the frequency boundaries established by the amplifier's internal crossover setting. In low-pass mode, only the bass boost is active; in high-pass mode, only the treble boost is active; in all-pass mode, both bass and treble controls operate across the full frequency range. This prevents the remote EQ from boosting frequencies outside the speaker's crossover-defined operating range. Where can the PEQ be mounted in the vehicle? The PEQ includes a mounting clip and screws for under-dash, centre console, or glovebox installation. The compact form factor suits most standard Australian vehicle dash and console environments without custom fabrication. Does the PEQ kit include everything needed for installation? Yes. The PEQ ships with the bass/treble knob unit, cable, mounting clip, and mounting screws covering all hardware required for a standard installation. Confirm cable length with your supplier to ensure it reaches your amplifier from your intended mounting location. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less