Designed for Motorsport and Marine Applications The PM1000X5 is a 1000 Watt 5-channel amplifier with high dynamic power using Class-a/b technology on the front/rear channels, Class-bd for the subwoofer channel, and a conformal coated pc board designed for motorsport and marine applications. The PM1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits. Features: High level input capable with Auto Turn-On circuit Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) 12dB/octave Butterworth crossover On-board Punch EQ with +18dB boost @ 45Hz Muted turn on Stealth top mounted control panel Cast aluminum heatsink Short circuit protection Over current protection Infrasonic filter 2/4 channel input switch Marine grade two part epoxy coating on circuit boards Marine grade stainless steel hardware Specifications: Input Sensitivity 150 mV - 12 V Operating Voltage 9 - 16 VDC Number of Channels 5 CEA-2006 Compliant CEA-2006 Power Rating 75Wx4 + 150Wx1 @ 4‚Ѷ, ‚â§1.0% THD+N Tone Controls Sub: 0dB to +18dB @ 45Hz Signal InputI nput Switch: Hi/Low level input / Input Switch: 2/4 channel input / Hi/Low Level: 3 RCA Pair / Sub: front/sub input switch Power Input Connector Block Power Wire Gauge 4 AWG Speaker Output Connector Block Speaker Wire Gauge 12 AWG Visual Indicators Power/Protect/Thermal LED, Input Clip LED3, Output Clip LED1,2,3 / LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD Dimensions (H x W x D) 2.38 x 7.76 x 15.03 (in) 6.05 x 19.71 x 38.18 (cm) Total Harmonic Distortion (THD+Noise) <1.0% Average Current Draw (13.8V Music) 75 A Max. Current Draw (13.8V Sinewave) 150 A Recommended Fuse (not included) 150 A Suggested Alternator 100 A Rated Power (RMS Continuous Power) 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm / 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm / N/A + 500 Watts @ 1-Ohm Total Power (Sum of Rated Power) 1000 Watts Bridgeable Yes (front/rear channels) Crossover Controls Front: 50Hz - 250Hz High-Pass @ 12dB/Octave / Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave / Sub: 50Hz - 250Hz Low-Pass / Sub: 28Hz infrasonic filter @ 12dB/Octave Heat Sink Type Cast Cooling Convection Remote Controls Optional Punch Level Control (PLC2) Ready Circuit Topology Class Class A/B + Class BD (Sub) Frequency Response Front/Rear: 20Hz - 20kHz +/-3dB / Sub: 20Hz - 500Hz +/-3dB Shipping Weight 15.3 lbs. (6.93 Kg.) Dynamic Power (PVC/PowerCube¬Æ) 115 Watts x 4 + 299 Watts x 1 @ 4-Ohms 0¬∞ Res / 190 Watts x 4 + 540 Watts x 1 @ 2-Ohms 0¬∞ Res / N/A + 863 Watts x 1 @ 1-Ohm 0¬∞ Res Efficiency (average) Front/Rear: 66% @ 4-Ohm / Sub Channel: 80% @ 4-Ohm Legendary Products & Support From Authorized Dealers When you choose Rockford Fosgate, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Rockford Fosgate dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Rockford Fosgate's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Rockford Fosgate dealer today!

Read more less

Rockford Fosgate Power Marine 400 Watt Class-ad 4-Channel Amplifier: Designed for Motorsport and Marine Applications The TM400X4ad is a 400 Watt 4-channel amplifier with high efficiency Class-ad technology and a conformal coated pc board designed for motorsport and marine applications. The Power TM400X4ad 400 Watt 4-channel ultra-compact, amplifier is built on Rockford Fosgate's proprietary Class-AD technology, featuring Constant Power to produce the same output at both 4-Ohm and 2-Ohm impedances. Flexible vehicle integration enabled through low-level and high-level inputs with auto turn-on. Top mounted controls allow easy access to built-in crossover and C.L.E.A.N. input/output clip detection circuits. The 3-stage thermal lock extrusion with dual fan forced induction keeps everything cool while real-time thermal/protection schemes safeguard the amplifier. Rockford Fosgate TM400X4ad Features: Rockford Fosgate proprietary Class AD technology 4/2 Ohm muti-impedance Constant Power Differential inputs with high level auto turn-on feature 8 AWG power/ground connector w/ upgraded RCA connectors Remote-Out feature when using high level inputs 2/4 channel input switch 4 Ohm bridged capable C.L.E.A.N. input/output clip detection and indicator LEDs Top mounted controls Dual fan cooled Real time thermal sensing Dual extruded heat sinks Discrete surface mount technology Marine grade two part epoxy coating on circuit boards Legendary Products & Support From Authorized Dealers When you choose Rockford Fosgate, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Rockford Fosgate dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Rockford Fosgate's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Rockford Fosgate dealer today!

Read more less

Rockford Fosgate Punch Marine 600 Watt 4-Channel Amplifier: Designed for Motorsport and Marine Applications The PM600X4 is a 600 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications. The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum. Rockford Fosgate PM600X4 Features: High level input capable with Auto Turn-On circuit RCA pass-thru outputs Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) 12dB/octave Butterworth crossover On-board Punch EQ with +18dB boost @ 45Hz Muted turn on Stealth top mounted control panel Cast aluminum heatsink Short circuit protection Over current protection Marine grade two part epoxy coating on circuit boards Marine grade stainless steel hardware Legendary Products & Support From Authorized Dealers When you choose Rockford Fosgate, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Rockford Fosgate dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Rockford Fosgate's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Rockford Fosgate dealer today!

Read more less

Stinger 7m Stinger PowerSports Marine 8GA Amplifier Kit: Go with The Right Choice with The Stinger Sea Range of Amplifier Wiring Kits 8GA Fully Marine Compliant Wiring Kit You buy marine screws, marine boat accessories, but normal power cable for your marine audio? Go with the right choice with the Stinger SEA range of amplifier wiring kits. Stinger SEA4287 Features: Power Cable Utilizing a Marine Grade Jacket Coated Over True Copper for Current Transfer & Tinned Conductors for Reliability in Harsh Marine Environments. Industry First Siamese Pair Dual Power &Ground Wire High Strand Count OFC Hyper-Twist Tinned Conductors Highest Marine-Grade – Type III BC5 W2 Compliant Marine PVC Jacket. 105C Dry, 75C Wet, Salt, Fog, Oil & Water Resistant. Exceeds UL1426 Marine Standards Element Resistant MIDI Fuse Holder Includes Wire Ferrules & Installation Hardware Red Power / Yellow Ground Marine Standard Color Coding. Stinger SEA4287 Specifications: Length: 7 Meter Power & Ground Cable Terminal Size: 8 Gauge Legendary Products & Support From Authorized Dealers When you choose Stinger, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Stinger dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Stinger's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Stinger dealer today!

Read more less

Stinger 3M PowerSports Marine 4GA Amplifier Kit: Type III BC5W2 Compliant Marine PVC Jacket, 1050 C Dry, 750 C Wet, Salt, Fog, Oil & Water-Resistance Exceeds UL1426 Marine Standards Stinger 4GA Fully Marine Compliant Wiring Kit You buy marine screws, marine boat accessories, but normal power cable for your marine audio? Go with the right choice with the Stinger SEA range of amplifier wiring kits. Stinger SEA4243 Features: Power Wiring Kit Utilizing Marine-Grade Jacket True Copper For Current Transfer & Tinned Conductors For Reliability In The Harsh Marine Environment Industry First Siamese Pair Dual Power & Ground Wire High Strand Count OFC Hyper-Twist Tinned Conductors Element-Resistant MIDI Fuse Holder Includes Wire Ferrules & Installation Hardware 4GA 3 Meter / 9.8 Feet / 175 AMP MIDI Fuse Red Power / Yellow Ground Marine Standard Color Coding Stinger SEA4243 Specifications: Terminal Size: 4 Gauge Length: 3 Meters Power & Ground Dimensions: 8.27" x 2.87" Legendary Products & Support From Authorized Dealers When you choose Stinger, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Stinger dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Stinger's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Stinger dealer today!

Read more less

Highlights: Highlights: SPECIFICATIONS: FREQUENCY RESPONSE: 10 HZ TO 40 KHZ (-3DB @ 4 OHM RATED POWER) PEAK POWER OUTPUT: 1500W RATED POWER OUTPUT (4 OHM): 100 W RMS X 6 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A) RATED POWER OUTPUT (2 OHM): 140 W RMS X 6 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A) RATED POWER OUTPUT (4 OHM BRIDGED): 280 W RMS X 3 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A) INPUT SENSITIVITY: 0.3 V TO 8 V RMS, USER ADJUSTABLE INPUT IMPEDANCE: 7K OHM NOMINAL HIGH-PASS/LOW-PASS FULL RANGE FILTER: YES, USER SELECTABLE FILTER CROSS-OVER FREQUENCY: 32 HZ TO 320 HZ, USER ADJUSTABLE BASS-BOOST: 0 TO 9 DB, USER ADJUSTABLE (ZONE 3 ONLY) OPERATING VOLTAGE: 21.6 V TO 32 V DC REMOTE SWITCH-ON: YES - 6 V THRESHOLD CURRENT CONSUMPTION (STANDBY): < 1 MA @ 28.8 V INPUT CURRENT CONSUMPTION (IDLE): < 1.25 A @ 28.8 V INPUT CURRENT CONSUMPTION (MAX): 35 A @ 28.8 V INPUT FUSE RATING: 3 X 20 A ATC BLADE-TYPE (SAE J1171 COMPLIANT) PROTECTION CIRCUITS: REVERSE-VOLTAGE, INPUT UNDER/OVER VOLTAGE, OVER-TEMPERATURE, OUTPUT SHORT-CIRCUIT OPERATING TEMPERATURE RANGE: 0 TO 50¬∞C (32 TO 122¬∞F) INGRESS PROTECTION RATING: DRY AREA INSTALLATION ONLY DIMENSIONS: 420 MM (L) X 210 MM (W) X 57 MM (H) OR 16-9-16" (L) X 8-1/4" (W) X 2-1/4" (H) WEIGHT: 5.15 KG OR 11.35 LBS. WITH COVER Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

Rockford Fosgate M2-750X5 M2 Series 750 Watt 5-Channel Full-Range Class-D Element Ready Marine Amplifier A marine grade 750W 5-channel Full-Range Class-D amplifier delivering 100W x 4 plus 350W x 1 at 2-ohm (CTA-2006 rated). Features independent front, rear, and subwoofer channel crossover control, Continuously Variable Punch EQ, variable infrasonic filter, C.L.E.A.N. gain calibration, Rollback Protection, NOMAD speaker protection, RLC remote level control, Auto-Sense turn-on, RCA pass-free conformal coated circuit board, and 2/4/5 channel input selection. Backed by a 2 year warranty. Product Overview The Rockford Fosgate M2-750X5 is a 750W 5-channel Full-Range Class-D marine amplifier from the M2 Element Ready series, providing a complete single-amplifier solution for powering both marine speakers and a subwoofer from the one unit. Rated continuous power is 50W x 4 plus 200W x 1 at 4-ohm, or 100W x 4 plus 350W x 1 at 2-ohm (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 114W x 4 plus 426W x 1 at 2-ohm, and 234W x 2 bridged at 4-ohm on the full-range channels. The M2-750X5 provides fully independent crossover control for the front, rear, and subwoofer channels, each with their own high-pass and low-pass crossover adjustments at 12dB/octave Butterworth (50Hz-250Hz) plus a variable infrasonic filter on the subwoofer channel (15Hz-40Hz). A 2/4/5 channel input selection switch enables flexible integration with source units providing different numbers of RCA outputs. Three dedicated sets of RCA and high-level inputs cover front, rear, and subwoofer channels separately. C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) provides independent input and output clip indicators for each channel group. A Continuously Variable onboard Punch EQ delivers up to 18dB of bass boost at 45Hz for the subwoofer channel. The circuit board is conformal coated against dust and water, and the UV stable powder coated cast aluminium heatsink provides environmental protection. Zinc nickel-plated marine grade brass connection terminals resist corrosion. Auto-Sense turn-on removes the need for a dedicated remote wire, with a RAP bypass switch available. An RLC remote level control is included for in-cabin subwoofer volume adjustment. Rollback Protection and NOMAD speaker protection are active throughout. RATS tested and optimised using AudioGraph PowerCube. Features & Benefits Complete 5-Channel Marine System in One Amplifier: The M2-750X5 powers front speakers, rear speakers, and a subwoofer from a single unit, making it a space-efficient solution for full marine audio builds without the need for two separate amplifiers. Independent Crossover Control for Each Channel Group: Front, rear, and subwoofer channel groups each have independent high-pass and low-pass crossover controls at 12dB/octave Butterworth (50Hz-250Hz), plus the subwoofer channel adds a variable infrasonic filter (15Hz-40Hz). This level of independent control across all channels is not available on the M2-200X2 or M2-500X1 separately. 2/4/5 Channel Input Selection Switch: The input selection switch allows the M2-750X5 to integrate with source units providing 2, 4, or 5 channels of RCA output, reducing the need for Y-cables or signal splitting in installations where the source unit has fewer RCA outputs. Continuously Variable Punch EQ - Up to 18dB at 45Hz: The onboard Punch EQ provides up to 18dB of continuously adjustable bass boost at 45Hz on the subwoofer channel, allowing output to be tuned to the acoustic environment without a separate EQ or DSP. Variable Infrasonic Filter - 15Hz to 40Hz Tunable: The subwoofer channel infrasonic filter is tunable from 15Hz to 40Hz at 12dB/octave, providing precise low-frequency protection across different subwoofer drivers and enclosure types. C.L.E.A.N. Technology - Per-Channel Clip Monitoring: C.L.E.A.N. provides dedicated input and output clip indicators for the front, rear, and subwoofer channels independently, enabling accurate gain calibration across all five channels without carrying distortion over into adjacent channels. RLC Remote Level Control Included: The included RLC remote level control allows subwoofer output volume to be adjusted from the helm or seating position without accessing the amplifier. Rollback Protection, NOMAD, and Conformal Coated PCB: Rollback Protection dynamically manages output to prevent thermal stress on the output devices. NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. The conformal coated circuit board protects against dust and water ingress at the PCB level. Technical Specs Specification Detail SKU M2-750X5 Number of Channels 5 (4 full-range + 1 subwoofer) Total Power 750W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 50W x 4 + 200W x 1 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 100W x 4 + 350W x 1 Rated Power - 4-ohm Bridged (CTA-2006) 200W x 2 (full-range channels) Dynamic Power - 4-ohm (PowerCube) 70W x 4 + 241W x 1 Dynamic Power - 2-ohm (PowerCube) 114W x 4 + 426W x 1 Dynamic Power - 4-ohm Bridged (PowerCube) 234W x 2 (full-range channels) Circuit Topology Full-Range Class-D Bridgeable Yes (full-range channels) Frequency Response 20 Hz - 20 kHz THD + Noise Less than 1.0% at 4-ohm and 2-ohm Input Sensitivity Low-Level: 150mV - 4V / High-Level: 450mV - 12V Signal Input Front: 2 x RCA + 4-Pin Molex / Rear: 2 x RCA + 4-Pin Molex / Sub: 2 x RCA + 4-Pin Molex Input Selection 2/4/5 Channel Switch Tone Controls Punch EQ: 0 to +18dB at 45Hz (Continuously Variable, Sub channel) Front High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Front Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Sub Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Sub Infrasonic Filter 15 Hz - 40 Hz at 12dB/Octave Butterworth (Variable) Remote Controls Yes (RLC Remote Level Control included) Auto-Sense Turn-On Yes (with RAP bypass switch) Power Wire Gauge 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Terminals Zinc Nickel-Plated Marine Grade Brass Cooling Convection Heatsink UV Stable Powder Coated Cast Aluminium (Focused Mass) Circuit Board Protection Conformal Coated Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 120A Max Current Draw at 13.8V Sinewave 71A Visual Indicators Power/Protect / C.L.E.A.N. In / C.L.E.A.N. Out (Front, Rear, Sub) Dimensions (H x W x D) 49 x 173 x 285mm (1.9 x 6.8 x 11.2 inch) Shipping Weight 2.78kg CTA-2006 Compliant Yes Quality Testing RATS (Rockford Automated Testing System) Warranty 2 Years Compatible With / Goes Well With The M2-750X5 suits marine watercraft and powersports applications requiring a single-unit 5-channel amplifier solution for speakers and a subwoofer. The 2/4/5 channel input switch makes it compatible with a wide range of source units. For higher output marine amplification, refer to the M5-1500X5. Goes Well With: PMX-1 - Rockford Fosgate Punch marine media receiver, a clean source unit pairing for the M2-750X5 in a full marine audio build M2-8H - M2 series 8 inch Color Optix marine horn speakers, powered by the four full-range channels of the M2-750X5 M2WL-8 / M2WL-8B - M2 series wake tower speakers for powering via the full-range channels of the M2-750X5 M210S4B / M212S4 - M2 series marine subwoofers driven by the dedicated 350W subwoofer channel of the M2-750X5 M5-1500X5 - Higher output M5 series 5-channel marine amplifier for builds requiring more power across all channels RFW4R / RFW4B - Rockford Fosgate 4 AWG marine amplifier wiring kits (red or black) matched to the M2-750X5's 4 AWG power wire requirement Frequently Asked Questions What is the difference between the M2-750X5 and the M5-1500X5? Both are 5-channel marine amplifiers, but they differ significantly in output and feature set. The M2-750X5 is from the M2 Element Ready series, rated at 100W x 4 plus 350W x 1 at 2-ohm, using Full-Range Class-D topology throughout all channels with conformal coating for environmental protection. The M5-1500X5 is from the premium M5 series, rated at 100W x 4 plus 600W x 1 at 2-ohm using Class-AD on full-range channels and Class-BD on the sub channel, with full IPX6 water intrusion rating, the PRESET feature for UTV kits, and greater than 75% efficiency. Choose the M2-750X5 for a complete, economical single-amplifier marine system; choose the M5-1500X5 for the highest protection rating and maximum subwoofer output. What does the 2/4/5 channel input selection switch do? The input selection switch configures the M2-750X5 to work with source units that provide 2, 4, or 5 channels of RCA output. On a 2-channel RCA setting, the front RCA inputs feed all five channels internally with the amp distributing signal appropriately. On 4-channel, front and rear pairs are used independently. On 5-channel, all three RCA input pairs (front, rear, sub) are used separately for full independent control. This removes the need for Y-cables in installations where the source unit has fewer RCA outputs. Can the M2-750X5 be used to power wake tower speakers? Yes. The four full-range channels can power wake tower speakers such as the M2WL-8 or M2WL-8B, with the dedicated subwoofer channel handling a marine subwoofer simultaneously. The 100W x 4 at 2-ohm rated output per channel is well matched to M2 series marine speakers in typical on-water listening conditions. What fuse does the M2-750X5 require and is it included? The M2-750X5 requires a 120A fuse, which is not included in the box and must be sourced separately. This is a larger fuse than the 80A used on the M2-500X1 and M2-200X2, reflecting the M2-750X5's higher current demand of up to 71A maximum at sinewave. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Does the M2-750X5 require a dedicated remote turn-on wire? Not necessarily. The Auto-Sense feature activates the amplifier automatically when it detects a high-level (speaker-level) input signal, removing the need for a dedicated remote wire when integrating with OEM or aftermarket source units without a remote output. A RAP bypass switch is also included for vessels with Retained Accessory Power systems to prevent the amplifier from staying on after the ignition is switched off.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

It’s The Difference Between Hearing The Music And Feeling ItThese efficient, easy-to-install amplifiers work with your compatible Fusion stereo system1 and let you choose from monoblock, multichannel, and zone amplifier options.The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel. These amplifiers use the Easy Tune feature2, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments. Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature. Easily install the amplifiers on board with the included mounting brackets. The ignition-protected design helps prevent potential damage from overheating. The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. You can connect up to two speakers per channel, increasing setup options. The amplifiers are designed to last season after season. They have been tested for a high level of protection against salt fog, temperature, vibration, and UV. Add extra power to your system with this 2000-watt (650-watt RMS) monoblock amplifier that’s specifically designed to power a subwoofer. This 4-channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. This 6-channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. This 8-channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power. The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you. A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating. These amps have less distortion and noise, so you enjoy quality audio. Mounting brackets are included for simple installation. Don’t worry about potential overheating damage with our ignition protection design. Specifications: Physical dimensions without bracket (LxWxH) Monoblock/4 Channel: 9.25″ x 7.06″ x 1.75″ (235 x 180 x 45 mm) Physical dimensions with bracket (LxWxH) Monoblock/4 Channel: 9.25″ x 7.06″ x 2.13″ (235 x 180 x 50 mm) Weight Monoblock/4 Channel: 4.85 lb (2.2 kg) Water rating Monoblock/4/6/8 Channel: IPX2 Amplifier class Class-D CEA-2006 power rating Monoblock: 650 watt RMS x 1 @ 14.4 V input - 4 ohm < 1% THD Peak power (Watts) Monoblock: 2000 watts Input sensitivity Monoblock: 2.15 V RMS Input impedance Monoblock/4/6/8 Channel: 22k ohm Operating voltage Monoblock/4/6/8 Channel: 10.8 V - 16 V DC Current draw, in standby/off using AMPLIFIER ON wire Monoblock/4/6/8 Channel: < 5 mA @ 14.4 V input Zone: < 1 mA @ 14.4 V input Current draw, on, no audio Monoblock: < 1.15 A @ 14.4 V input Power-cable fuse or circuit breaker rating (not included) 40 A Ignition Safety Protected (SAE J1171) Yes Protection circuits Reverse voltage Input under/over voltage Over Temperature Output short circuit Operating temperature range 0° to 50° C Warranty 3 years Accessories: Cables & Chargers Connectors Mounts Compatible Devices: Apollo RA670 Apollo RA770 Apollo WB670 Fusion EL Series Marine Speakers Fusion FM Series Marine Speakers Fusion FM Series Marine Subwoofers Fusion RA210 Marine Stereo Fusion Signature Series 3 Marine Speakers Fusion Signature Series 3 Marine Subwoofers Fusion Signature Series 3 Marine Wake Tower Speakers Fusion XS Series Marine Speakers Fusion XS Series Marine Subwoofers What's in the Box: One Apollo monoblock amplifier One mounting bracket One power connector One speaker connector Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Mounting template Installation instructions Important safety and product information (ISPI) Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

It’s The Difference Between Hearing The Music And Feeling ItThese efficient, easy-to-install amplifiers work with your compatible Fusion stereo system1 and let you choose from monoblock, multichannel, and zone amplifier options.The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel. These amplifiers use the Easy Tune feature2, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments. Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes. Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature. Easily install the amplifiers on board with the included mounting brackets. The ignition-protected design helps prevent potential damage from overheating. The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements. You can connect up to two speakers per channel, increasing setup options. The amplifiers are designed to last season after season. They have been tested for a high level of protection against salt fog, temperature, vibration, and UV. Add extra power to your system with this 2000-watt (650-watt RMS) monoblock amplifier that’s specifically designed to power a subwoofer. This 4-channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. This 6-channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power. This 8-channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power. The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.Features: Keep the music going for longer without draining your battery as quickly No more manual adjustments to your audio settings. The Easy Tune feature does it for you. A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating. These amps have less distortion and noise, so you enjoy quality audio. Mounting brackets are included for simple installation. Don’t worry about potential overheating damage with our ignition protection design. Specifications: Physical dimensions without bracket (LxWxH) 6 Channel: 11.69″ x 7.06″ x 1.75″ (297 x 180 x 45 mm) Physical dimensions with bracket (LxWxH) 6 Channel: 11.69″ x 7.06″ x 2.13″ (297 x 180 x 50 mm) Weight Monoblock/4 Channel: 6 Channel: 5.95 lb (2.7 kg) Water rating Monoblock/4/6/8 Channel: IPX2 Amplifier class Class-D CEA-2006 power rating 6 Channel: 150 watt RMS x 6 @ 14.4 V input - 4 ohm < 1% THD Total rated power output - 6 Channel: 290 watt RMS x 6 @ 14.4 V input - 2 ohm < 1% THD Total rated power output - 6 Channel: 580 watt RMS x 3 @ 14.4 V input - 4 ohm Bridged < 1% THD Peak power (Watts) 6 Channel: 1800 watts Input sensitivity 4/6/8 Channel: 1.6 V RMS Input impedance Monoblock/4/6/8 Channel: 22k ohm Operating voltage Monoblock/4/6/8 Channel: 10.8 V - 16 V DC Current draw, in standby/off using AMPLIFIER ON wire Monoblock/4/6/8 Channel: < 5 mA @ 14.4 V input Zone: < 1 mA @ 14.4 V input Current draw, on, no audio 6 Channel: < 1.32 A @ 14.4 V input Power-cable fuse or circuit breaker rating (not included) 40 A Ignition Safety Protected (SAE J1171) Yes Protection circuits Reverse voltage Input under/over voltage Over Temperature Output short circuit Operating temperature range 0° to 50° C Warranty 3 years Accessories: Cables & Chargers Connectors Mounts Compatible Devices: Apollo RA670 Apollo RA770 Apollo WB670 Fusion EL Series Marine Speakers Fusion FM Series Marine Speakers Fusion FM Series Marine Subwoofers Fusion RA210 Marine Stereo Fusion Signature Series 3 Marine Speakers Fusion Signature Series 3 Marine Subwoofers Fusion Signature Series 3 Marine Wake Tower Speakers Fusion XS Series Marine Speakers Fusion XS Series Marine Subwoofers What's in the Box: One Apollo monoblock amplifier One mounting bracket One power connector One speaker connector Four 8-gauge, flat-head self-tapping screws Four 8-gauge, pan-head self-tapping screws (for mounting bracket) Four screw covers Mounting template Installation instructions Important safety and product information (ISPI) Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

Stinger 8GA 4000 Series Power Wiring Kit: Perfect Choice for More Sophisticated Car Audio Systems Stinger 4000 Series Power Wiring Kit All of the Stinger power and speaker wire is made of true-spec tinned oxygen-free copper to ensure maximum power transfer. Tremendous power capabilities, superior noise rejection, and exceptional signal integrity are all reasons why the Stinger 4000 series delivers unmatched performance and reliability with killer styling that looks great in any install. Stinger 4000 series wiring kits are no exception, setting the standard for top-notch connectivity. Our power signal kits combine our exceptional 4000 series interconnect with the power essentials for a quality installation. Designed specifically for car audio systems up to 800 watts or 70 amps made from 100% oxygen-free copper for a pure uninterrupted transfer of power TRU-SPEC cables/wires meet or exceed the industry standard of copper required for the gauge size tinned conductors for corrosion resistance Mini-ANL (MIDI) style fuse holder (SPD5801) for maximum power delivery and safety matte finish hyper-twist wire construction provides excellent flexibility pre-terminated power connections provide reliable performance kit Includes Stinger 4000 series 17ft RCA Interconnect Lead. Stinger SK4281 Features: Designed Specifically for Car Audio Systems up To 600 Watts or 60 Amps Made from 100% Oxygen-Free Copper for A Pure Uninterrupted Transfer of Power TRU-SPEC Cables/Wires Tinned Conductors for Corrosion Resistance Mini-ANL (MIDI) Style Fuse Holder (SPD5101) for Maximum Power Delivery & Safety Matte Finish Hyper-Twist Wire Construction Provides Excellent Flexibility Pre-Terminated Power Connections Provide Reliable Performance What's in The Box: 18FT./5.5M Matte Red Hyper-Twist 8GA Power Wire 3FT./0.9M Matte Black Hyper-Twist 8GA Ground Wire 17FT./5.2M Matte Blue 18GA Remote Turn-On Wire SPD5101 AGU Fuse Holder 60 Amp AGU Fuse 8GA Crimp Ring Terminals Pre-Installed 16GA Blue Butt Connector 8GA Snap In Protective Firewall Grommet Self-Drilling Mounting Screws (10) 7‚Äù/17.8CM Wire Ties Legendary Products & Support From Authorized Dealers When you choose Stinger, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Stinger dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Stinger's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Stinger dealer today!

Read more less

Stinger 38m Marine 8GA Power & Ground Wire: Introducing an Industry First! Siamese Dual Power/Ground Cables No more double duty when wiring a boat! With Stinger SEASW8125 Marine Grade Siamese Pair Dual Power & Ground Wire, you can now easily run power and ground together to save time and frustration. Also a great option for aluminum bodied vehicles requiring grounding at the battery. Stinger SEASW8125 Features: Featuring Marine Grade Jacket. True Copper for Current Transfer and Tinned Conductors for Reliability in The Harsh Marine Environment. Industry First Siamese Pair Dual Power and Ground Wire, Loaded on Heavy Duty Wood Spools. High Strand Count Ofc Hyper-Twist Tinned Conductors Highest Marine Grade - Type Iii BC5W2 Compliant Marine PVC Jacket,1050 C Dry, 750 C Wet, Salt, Fog, Oil, Water Resistant. Exceeds UL1426 Marine Standards Red Power / Yellow Ground Marine Standard Color Coding. 8GA - 38M/125FT. Stinger SEASW8125 Specification: Product Color: Red & Yellow Length: 38 Metre Roll Size: 8 Gauge Legendary Products & Support From Authorized Dealers When you choose Stinger, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Stinger dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Stinger's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Stinger dealer today!

Read more less

Rockford Fosgate M5-1000X1 1000 Watt Mono IPX6 Element Ready Marine Subwoofer Amplifier A marine grade 1000W monoblock Class-BD subwoofer amplifier with IPX6 water intrusion rating, delivering 750W x 1 at 2-ohm and 1000W dynamic at 1-ohm (CTA-2006 rated). Features C.L.E.A.N. gain calibration, NOMAD speaker protection, P.O.W.E.R. supply, MEHSA4 heat management, infrasonic filter, and balanced differential inputs. Greater than 80% efficiency. Engineered in the USA. Backed by a 2 year warranty. Product Overview The Rockford Fosgate M5-1000X1 is a 1000W monoblock Class-BD marine subwoofer amplifier purpose-built for demanding outdoor environments. IPX6 rated and fully Element Ready, it is protected against dust, UV radiation, temperature extremes, water jets from any direction, corrosion, and vibration throughout its service life. As a dedicated single-channel subwoofer amplifier, the M5-1000X1 operates across a frequency range of 30Hz to 245Hz. Rated continuous power is 500W x 1 at 4-ohm, 750W x 1 at 2-ohm, and 750W x 1 at 1-ohm, all at less than 1.0% THD+N and CTA-2006 certified. Dynamic power via PVC/PowerCube reaches 525W at 4-ohm, 900W at 2-ohm, and 1000W at 1-ohm. Class-BD topology delivers greater than 80% efficiency - significantly higher than the 20-60% typical of traditional Class-A/B amplifier designs - and less than 0.1% THD+N at 1 watt. C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) input and output clip indicators guide precise gain calibration at setup. NOMAD real-time protection guards against shorted speaker wires and dangerously low impedances. MEHSA4 reduces MOSFET temperatures, lowers distortion, and extends output device life. The PRESET feature eliminates manual setup when used with compatible Rockford Fosgate UTV audio kits. An infrasonic filter at 30Hz protects subwoofers from damaging low-frequency excursion. Chassis isolation from mounting points reduces vehicle noise introduction into the audio signal. Features & Benefits Class-BD Monoblock - Greater Than 80% Efficiency: The M5-1000X1 uses Class-BD topology throughout its single subwoofer channel, delivering greater than 80% efficiency versus the 20-60% typical of traditional Class-A/B monoblock amplifiers. This means more power delivered to the subwoofer with less heat generated and less current drawn from the vessel's charging system. C.L.E.A.N. Technology - Precision Gain Calibration: C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with dedicated input and output clip indicator LEDs, making it straightforward to match the source unit output to the amplifier's input sensitivity for maximum output with minimum distortion. P.O.W.E.R. Supply and Constant Power Circuit: The P.O.W.E.R. supply continues to generate above rated output as voltage increases. The patented Constant Power circuit topology provides instantaneous power delivery across varying impedance loads, boosting output by up to 25%. Infrasonic Filter - Subwoofer Protection at 30Hz: The infrasonic filter on the output channel attenuates frequencies below 30Hz at 12dB/octave, protecting subwoofer drivers from damaging excursion caused by subsonic content that cannot be heard but can overstress the driver at high volume. NOMAD Speaker Protection - Real-Time Monitoring: NOMAD is a real-time analog protection circuit that continuously monitors for shorted speaker wires and dangerously low speaker impedances, protecting both the amplifier and connected subwoofer from damage. MEHSA4 Heat Management and Chassis Isolation: MEHSA4 (Maximum Efficiency Heat Sink Application) reduces MOSFET operating temperatures, lowers distortion, increases durability, and extends output device life. Chassis isolation from mounting points reduces the introduction of vehicle electrical noise into the audio signal. IPX6 Element Ready - Built for Marine and Outdoor Environments: IPX6 water intrusion rating confirms protection against powerful jets of water from any direction. Element Ready construction with integrated harness and panel seals protects all components throughout the service life of the amplifier. RATS Tested and Engineered in the USA: Each M5-1000X1 is quality and performance tested through Rockford Fosgate's proprietary RATS (Rockford Automated Testing System). Designed and engineered in the USA. Technical Specs Specification Detail SKU M5-1000X1 Number of Channels 1 (Monoblock) Total Power 1000W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 500W x 1 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 750W x 1 Rated Power - 1-ohm (CTA-2006, less than 1.0% THD+N) 750W x 1 Dynamic Power - 4-ohm (CTA-2006 PVC/PowerCube) 525W x 1 Dynamic Power - 2-ohm (CTA-2006 PVC/PowerCube) 900W x 1 Dynamic Power - 1-ohm (CTA-2006 PVC/PowerCube) 1000W x 1 Circuit Topology Class-BD Bridgeable No Frequency Response 30 Hz - 245 Hz THD + Noise Less than 0.1% at 1 Watt Input Sensitivity 150mVrms - 12Vrms Efficiency Greater than 80% Signal Input Low-Level: 2 x RCA / High-Level: 4-Pin Molex Tone Controls Sub: 0-18dB at 45Hz Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Infrasonic Filter 30 Hz at 12dB/Octave Butterworth Power Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 16 AWG Speaker Output Connector 4-Pin Molex Cooling Convection Heatsink Extruded Aluminium (Focused Mass) Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 70A MAXI (Littelfuse 0299070) Average Current Draw at 13.8V Music 4-ohm: 23A / 2-ohm: 53A / 1-ohm: 64A Max Current Draw at 13.8V Sinewave 4-ohm: 46A / 2-ohm: 75A / 1-ohm: 88A Water Intrusion Rating IPX6 Visual Indicators Power: Blue / Protect: Red / Input Clip: Red / Output Clip: Blue/Red Dimensions (H x W x D) 42.8 x 108 x 213mm (1.7 x 4.25 x 8.41 inch) Shipping Weight 2.7kg CTA-2006 Compliant Yes Quality Testing RATS (Rockford Automated Testing System) Warranty 2 Years Compatible With / Goes Well With The M5-1000X1 is a dedicated monoblock subwoofer amplifier suited to marine watercraft, pontoon boats, wakeboard boats, and powersports vehicles requiring a high-output, single-channel subwoofer drive. It is the recommended dedicated subwoofer amplifier for pairings with Rockford Fosgate M2 marine subwoofers. Goes Well With: M212S4 - Rockford Fosgate M2 series 12 inch 4-ohm marine subwoofer handling 300W RMS, an ideal pairing for the M5-1000X1 at 2-ohm or 4-ohm rated output M210S4B - M2 series 10 inch 4-ohm marine subwoofer in black for a compact pairing with the M5-1000X1 M5-800X4 - Companion M5 series 4-channel amplifier for full marine system builds pairing the M5-1000X1 on subwoofer duty with the M5-800X4 powering full-range speakers M5-1500X5 - 5-channel alternative for builds where a single amplifier covering both full-range and subwoofer channels is preferred over separate units DSR1 - Rockford Fosgate Digital Signal Processor for advanced signal processing ahead of the M5-1000X1 RFW8R / RFW8B - Rockford Fosgate 8 AWG marine amplifier wiring kits (red or black) matched to the M5-1000X1's 8 AWG power wire requirement Frequently Asked Questions What is the difference between the M5-1000X1 and the M5-800X4? The M5-1000X1 is a monoblock subwoofer amplifier with a single Class-BD channel delivering up to 750W RMS at 2-ohm, designed exclusively to drive a subwoofer. Its frequency response is limited to 30Hz-245Hz and it features only a low-pass crossover and infrasonic filter. The M5-800X4 is a 4-channel full-range amplifier delivering 100W x 4 at 4-ohm across a 10Hz-50kHz frequency response, suited to powering speakers rather than a subwoofer. In most full marine audio builds, both amplifiers are used together. What subwoofer impedance gives the best output from the M5-1000X1? The M5-1000X1 delivers its highest rated continuous output at 2-ohm (750W RMS) and its highest dynamic output at 1-ohm (1000W dynamic). At 4-ohm, rated continuous output is 500W RMS. For the best balance of output and reliability in a marine environment, pairing the M5-1000X1 with a 2-ohm or dual voice coil subwoofer wired to 2-ohm is recommended. Is the M5-1000X1 suitable for saltwater marine environments? Yes. The M5-1000X1 carries IPX6 water intrusion rating and full Element Ready certification with integrated harness and panel seals, protecting it against water jets from any direction, UV radiation, corrosion, dust, vibration, and temperature extremes. It is designed for both freshwater and saltwater marine applications. What does the infrasonic filter do and should I enable it? The infrasonic filter attenuates frequencies below 30Hz at 12dB/octave on the output channel. Subsonic content below this threshold cannot be heard but can cause excessive cone excursion in subwoofer drivers at high output levels, risking damage over time. Enabling the infrasonic filter is recommended for most marine subwoofer installations, particularly at high volumes or when the source material may include subsonic content. What fuse is required for the M5-1000X1 and is it included? The M5-1000X1 requires a 70A MAXI fuse (Littelfuse part number 0299070). Note this is a 70A fuse - different from the 80A MAXI used on the M5-800X4 and M5-1500X5. The fuse is not included in the box and must be sourced separately. Install it as close to the battery as possible in the 8 AWG power supply line.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less