JL Audio JLA-010-03267-00 M3 Enclosed Tower Speakers - 7.7" Marine Coaxial Speakers with Gray Sport Grille Premium 7.7-inch enclosed marine tower speaker system with RGB LED lighting, extended bass response, and complete ready-to-install wakeboard tower solution. Product Overview The JL Audio M3 Enclosed Tower Speakers (JLA-010-03267-00) deliver powerful, full-range audio performance specifically engineered for wakeboard tower installations on boats. These 7.7-inch enclosed coaxial speakers combine impressive output capability with extended low-frequency response (55 Hz-25 kHz) in acoustically optimized enclosures designed for demanding marine environments. The Gray Sport grille with integrated RGB LED lighting creates stunning visual effects during evening watersports sessions while the sealed enclosure design protects speaker components from water spray, debris, and environmental contamination. Each system features a mica-filled polypropylene woofer cone that resists UV damage and saltwater corrosion, paired with a 0.75-inch silk dome tweeter for smooth high-frequency reproduction that cuts through wind and water noise. Rated at 70 watts RMS continuous power handling with impressive 90.5 dB sensitivity, these tower speakers deliver substantial output when powered by 20-140 watts per channel. The complete enclosed design eliminates the need for custom tower speaker fabrication while providing optimal acoustic loading for enhanced bass response compared to free-air tower speakers. Extended 10-foot flying leads with pre-attached speaker wire (16 AWG) and separate RGB LED wire (4-conductor 20 AWG) simplify installation by providing adequate length for tower-to-amplifier routing. Sold as a pair with aluminum logo caps, silicone adhesive, and butt splice connectors included, these M3 enclosed tower speakers represent the ultimate ready-to-install wakeboard tower audio solution for boats requiring powerful sound projection across the water. Features & Benefits The enclosed design eliminates the need for custom tower speaker pods, mounting brackets, or enclosure fabrication, providing a complete ready-to-install solution that saves installation time and ensures optimal acoustic performance specifically engineered for tower mounting. Acoustically optimized sealed enclosure provides proper rear loading for the 7.7-inch woofer, delivering significantly enhanced bass response (down to 55 Hz) compared to free-air tower speakers where bass output suffers from cancellation, critical for projecting sound across water and wind. Integrated RGB LED lighting illuminates the Gray Sport grille with customizable colors (red, green, blue, and combinations), creating impressive visual effects visible from the water during evening watersports, wakeboarding, and night cruising. Marine-grade construction features mica-filled polypropylene cone that resists UV degradation from constant sun exposure, saltwater corrosion, and temperature extremes common in tower-mounted applications with maximum environmental exposure. The 0.75-inch silk dome tweeter delivers smooth, detailed high-frequency reproduction that maintains clarity and intelligibility even at high volume levels necessary to overcome engine noise, wind, and water sounds. Exceptional 90.5 dB sensitivity ensures efficient output, producing substantial volume levels without requiring excessive amplifier power, ideal for tower installations where maximum projection across water is critical. Extended frequency response (55 Hz-25 kHz) delivers full-range performance with deep bass fundamentals and extended highs, eliminating the need for additional subwoofers in many tower audio applications. 70-watt RMS power handling with 20-140W recommended amplifier range accommodates everything from moderate-power systems to high-output installations for maximum sound projection. 4-ohm nominal impedance matches standard marine amplifiers for optimal power transfer and compatibility. Extended 10-foot flying leads with pre-attached 16 AWG speaker wire and separate 4-conductor RGB LED wire provide adequate length for routing from tower mounting locations down to amplifiers and LED controllers without splicing or extensions. Gray Sport grille provides sophisticated aesthetic that complements modern boat styling while RGB lighting enhances visual appeal. Compact tower mounting profile (7.70" diameter x 12.69" depth) fits most wakeboard tower tube diameters and mounting configurations. Aluminum logo caps add premium branding detail to tower installations. Technical Specifications Specification Details Model JLA-010-03267-00 M3 Enclosed Tower Speakers Configuration Enclosed Coaxial Tower Speaker System Speaker Size 7.7 inches Grille Style Gray Sport with RGB LED LED Lighting RGB (red, green, blue) Quantity 2 speakers (pair) Power Handling (RMS) 70 watts per speaker Recommended Amp Power 20-140W RMS per channel Sensitivity 90.5 dB @ 1W/1m Frequency Response 55 Hz - 25 kHz (±3dB) Nominal Impedance 4 ohms Woofer Cone Material Mica-filled polypropylene Tweeter Type Silk dome Tweeter Size 19 mm (0.75 inches) LED Supply Voltage 10-14.4 VDC LED Current Draw (Max) 108 mA @ 14.4 VDC per speaker Enclosure Diameter 196 mm (7.70 inches) Enclosure Depth 323 mm (12.69 inches) Enclosure Type Sealed, acoustically optimized Speaker Wire Flying lead, 16 AWG, 10 feet LED Wire Flying lead, 4-conductor 20 AWG, 10 feet Marine Environment UV and saltwater corrosion resistant Warranty 3 years Included Accessories 2x aluminum logo caps, silicone adhesive, 8x red butt splices (22-18 AWG), 4x blue butt splices (16-14 AWG) Compatible With / Goes Well With JL Audio Marine Amplifiers: MX Marine and Powersports Amplifiers (MX280/4, MX600/3), MVi Marine Amplifiers, MHD Marine Amplifiers, XDM Car and Marine Amplifiers, AP Amplifiers, AP Amplifiers with Bluetooth for dedicated tower speaker amplification delivering 20-140W per channel JL Audio Source Units: MediaMaster 55 Stereo (requires external amplification for optimal M3 tower performance), MediaMaster 105 Stereo for multi-zone control with dedicated tower speaker zone JL Audio Marine Subwoofers: M3 Marine Subwoofer models for dedicated bass reproduction complementing tower speaker full-range performance, particularly for installations requiring maximum low-end impact beyond tower speaker bass extension System Integration: Fusion Apollo MS-RA800 marine stereo for alternative source unit, RGB LED controllers for synchronized lighting effects with other boat lighting systems, tower speaker amplifiers for dedicated zone control Tower Applications: Wakeboard tower mounting on ski boats, wake boats, tournament ski boats, performance boats with towers, pontoon boats with tower structures, any vessel with tower requiring high-output audio projection across water Installation Requirements: Wakeboard tower with suitable mounting points (typically 2-2.5" diameter tubes), amplification providing 20-140W RMS per channel for optimal performance, RGB LED controller for color selection and lighting effects (sold separately), tower mounting clamps or brackets (may be required depending on tower configuration), cable routing from tower to amplifier and LED controller locations Frequently Asked Questions What makes enclosed tower speakers better than free-air tower speakers? Enclosed tower speakers like the M3 provide proper acoustic loading for the woofer, delivering significantly deeper bass response (55 Hz lower limit) compared to free-air designs that suffer from front-to-rear wave cancellation. The sealed enclosure also protects the speaker's rear from water spray during watersports, provides consistent performance regardless of mounting configuration, and eliminates the need for custom enclosure fabrication. Free-air speakers require careful mounting with baffles and often produce weak bass, while enclosed designs deliver full-range performance ready to install. How powerful an amplifier do I need for these tower speakers? The M3 tower speakers handle 70 watts RMS with recommended amplifier power of 20-140W per channel. For moderate volume levels during casual cruising, 40-70 watts per channel provides good output. For maximum performance during watersports where speakers must project sound across water, wind, and engine noise to riders behind the boat, use 100-140 watts per channel. The high 90.5 dB sensitivity means these speakers produce impressive output even with moderate power, but tower applications benefit from higher power for maximum sound projection distances. How do I mount these speakers on my wakeboard tower? The M3 enclosed tower speakers typically mount using universal tower speaker clamps or brackets designed for 2-2.5" diameter tower tubes (mounting hardware may be sold separately depending on your specific tower configuration). The 7.70" diameter and 12.69" depth dimensions fit most tower mounting scenarios. Use the included silicone adhesive to create water-resistant seals between mounting hardware and speaker enclosures. Angle speakers toward the cockpit/swim platform for optimal sound coverage. The 10-foot flying leads provide adequate length for routing down the tower tubes to amplifiers and LED controllers mounted in the boat. Can I control the RGB LED lighting colors? The RGB LEDs connect to your boat's 12V DC electrical system (10-14.4V) via the included 4-conductor 20 AWG flying lead and require an RGB LED controller (sold separately) to change colors and create lighting effects. Without a controller, LEDs illuminate in a default color. Marine-specific RGB controllers offer wireless control via smartphone apps, enabling color selection, brightness adjustment, and synchronized effects with other boat lighting. The 108mA current draw per speaker means a pair draws 216mA total, adding minimal electrical load to your system. How does the M3 7.7" compare to smaller 6.5" VeX or M6 tower speakers? The M3 7.7" tower speakers offer larger woofer size for enhanced bass extension (55 Hz vs 100 Hz on 6.5" models), higher sensitivity (90.5 dB vs 89.5 dB) for greater output efficiency, and extended depth (12.69" vs 6.16") to accommodate the larger driver and optimized acoustic volume. The 7.7" models are purpose-built for tower mounting where maximum sound projection and bass response are critical, while 6.5" VeX models work for universal mounting including tower applications but with less bass extension. Choose 7.7" M3 for dedicated tower installations prioritizing maximum performance; choose 6.5" models for universal applications or tighter space constraints.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03266-00 M3 Enclosed Tower Speakers - 7.7" Marine Coaxial Speakers with White Classic Grille Premium 7.7-inch enclosed marine tower speaker system with traditional White Classic grille, extended bass response, and complete ready-to-install wakeboard tower solution. Product Overview The JL Audio M3 Enclosed Tower Speakers (JLA-010-03266-00) deliver powerful, full-range audio performance specifically engineered for wakeboard tower installations on boats. These 7.7-inch enclosed coaxial speakers combine impressive output capability with extended low-frequency response (55 Hz-25 kHz) in acoustically optimized enclosures designed for demanding marine environments. The White Classic grille provides timeless marine aesthetics without LED lighting, ideal for installations prioritizing traditional clean appearance or avoiding additional electrical complexity. The sealed enclosure design protects speaker components from water spray, debris, and environmental contamination during watersports activities. Each system features a mica-filled polypropylene woofer cone that resists UV damage and saltwater corrosion, paired with a 0.75-inch silk dome tweeter for smooth high-frequency reproduction that cuts through wind and water noise. Rated at 70 watts RMS continuous power handling with impressive 90.5 dB sensitivity, these tower speakers deliver substantial output when powered by 20-140 watts per channel. The complete enclosed design eliminates the need for custom tower speaker fabrication while providing optimal acoustic loading for enhanced bass response compared to free-air tower speakers. Extended 10-foot flying leads with pre-attached speaker wire (16 AWG) simplify installation by providing adequate length for tower-to-amplifier routing. Sold as a pair with aluminum logo caps, silicone adhesive, and butt splice connectors included, these M3 enclosed tower speakers represent the ultimate ready-to-install wakeboard tower audio solution for boats requiring powerful sound projection with traditional marine styling. Features & Benefits The enclosed design eliminates the need for custom tower speaker pods, mounting brackets, or enclosure fabrication, providing a complete ready-to-install solution that saves installation time and ensures optimal acoustic performance specifically engineered for tower mounting. Acoustically optimized sealed enclosure provides proper rear loading for the 7.7-inch woofer, delivering significantly enhanced bass response (down to 55 Hz) compared to free-air tower speakers where bass output suffers from cancellation, critical for projecting sound across water and wind. White Classic grille provides timeless traditional marine aesthetics without LED lighting, ideal for installations prioritizing clean appearance, avoiding additional electrical wiring complexity, or matching classic boat styling. Marine-grade construction features mica-filled polypropylene cone that resists UV degradation from constant sun exposure, saltwater corrosion, and temperature extremes common in tower-mounted applications with maximum environmental exposure. The 0.75-inch silk dome tweeter delivers smooth, detailed high-frequency reproduction that maintains clarity and intelligibility even at high volume levels necessary to overcome engine noise, wind, and water sounds. Exceptional 90.5 dB sensitivity ensures efficient output, producing substantial volume levels without requiring excessive amplifier power, ideal for tower installations where maximum projection across water is critical. Extended frequency response (55 Hz-25 kHz) delivers full-range performance with deep bass fundamentals and extended highs, eliminating the need for additional subwoofers in many tower audio applications. 70-watt RMS power handling with 20-140W recommended amplifier range accommodates everything from moderate-power systems to high-output installations for maximum sound projection. 4-ohm nominal impedance matches standard marine amplifiers for optimal power transfer and compatibility. Extended 10-foot flying lead with pre-attached 16 AWG speaker wire provides adequate length for routing from tower mounting locations down to amplifiers without splicing or extensions, simplifying installation compared to Sport models requiring separate LED wiring. Compact tower mounting profile (7.70" diameter x 12.62" depth) fits most wakeboard tower tube diameters and mounting configurations. Aluminum logo caps add premium branding detail to tower installations. Simplified wiring without LED connections reduces installation complexity and potential failure points in harsh marine environments. Technical Specifications Specification Details Model JLA-010-03266-00 M3 Enclosed Tower Speakers Configuration Enclosed Coaxial Tower Speaker System Speaker Size 7.7 inches Grille Style White Classic (no LED) LED Lighting None (Classic model) Quantity 2 speakers (pair) Power Handling (RMS) 70 watts per speaker Recommended Amp Power 20-140W RMS per channel Sensitivity 90.5 dB @ 1W/1m Frequency Response 55 Hz - 25 kHz (±3dB) Nominal Impedance 4 ohms Woofer Cone Material Mica-filled polypropylene Tweeter Type Silk dome Tweeter Size 19 mm (0.75 inches) Enclosure Diameter 196 mm (7.70 inches) Enclosure Depth 321 mm (12.62 inches) Enclosure Type Sealed, acoustically optimized Speaker Wire Flying lead, 16 AWG, 10 feet LED Wire Not applicable (no LEDs) Marine Environment UV and saltwater corrosion resistant Warranty 3 years Included Accessories 2x aluminum logo caps, silicone adhesive, 8x red butt splices (22-18 AWG), 4x blue butt splices (16-14 AWG) Compatible With / Goes Well With JL Audio Marine Amplifiers: MX Marine and Powersports Amplifiers (MX280/4, MX600/3), MVi Marine Amplifiers, MHD Marine Amplifiers, XDM Car and Marine Amplifiers, AP Amplifiers, AP Amplifiers with Bluetooth for dedicated tower speaker amplification delivering 20-140W per channel JL Audio Source Units: MediaMaster 55 Stereo (requires external amplification for optimal M3 tower performance), MediaMaster 105 Stereo for multi-zone control with dedicated tower speaker zone JL Audio Marine Subwoofers: M3 Marine Subwoofer models for dedicated bass reproduction complementing tower speaker full-range performance, particularly for installations requiring maximum low-end impact beyond tower speaker bass extension System Integration: Fusion Apollo MS-RA800 marine stereo for alternative source unit, tower speaker amplifiers for dedicated zone control Tower Applications: Wakeboard tower mounting on ski boats, wake boats, tournament ski boats, performance boats with towers, pontoon boats with tower structures, any vessel with tower requiring high-output audio projection with traditional marine styling Installation Requirements: Wakeboard tower with suitable mounting points (typically 2-2.5" diameter tubes), amplification providing 20-140W RMS per channel for optimal performance, tower mounting clamps or brackets (may be required depending on tower configuration), cable routing from tower to amplifier location Frequently Asked Questions What's the difference between the White Classic and Gray/White Sport grille models? The White Classic model features traditional marine grille aesthetics without RGB LED lighting, offering simplified installation with only speaker wire connections. Sport models (Gray Sport, White Sport) include integrated RGB LED lighting that illuminates the grille with customizable colors, requiring additional LED wiring and RGB controller. Choose Classic for traditional appearance, simplified wiring, avoiding LED electrical complexity, or matching classic boat styling. Choose Sport for visual impact during evening watersports with color-changing lighting effects. Both deliver identical audio performance—the difference is purely aesthetic and lighting features. Do I lose any audio performance by choosing the Classic model without LEDs? No, the White Classic model delivers identical audio performance to Sport models with the same 70W RMS power handling, 90.5 dB sensitivity, 55 Hz-25 kHz frequency response, and acoustic design. The only differences are the grille style and absence of RGB LED lighting. The Classic model actually has slightly shallower depth (12.62" vs 12.69") due to not accommodating LED components, though this difference is negligible. If you prioritize audio performance over lighting effects, the Classic model offers identical sound quality with simpler installation. Is the White Classic grille suitable for boats with white gel coat or white towers? Yes, the White Classic grille is specifically designed to complement traditional white marine aesthetics common on gel coat hulls, white towers, and classic boat styling. The timeless white appearance integrates seamlessly with white wakeboard towers, matching the clean professional look of tournament ski boats and performance boats. For boats with darker towers or modern color schemes, consider the Gray Sport model. The White Classic works best when matching predominantly white boat exteriors and tower structures. Does the simpler wiring without LEDs improve reliability in marine environments? Yes, eliminating LED wiring reduces installation complexity and potential failure points in harsh marine environments. Fewer electrical connections mean fewer opportunities for corrosion, water intrusion, or connection failures. Tower-mounted speakers face maximum environmental exposure including direct sun, spray, and temperature extremes—simplified wiring improves long-term reliability by reducing electrical system complexity. For installations prioritizing maximum reliability or avoiding potential LED system issues, the Classic model's speaker-only wiring represents a more robust approach. Can I add LED lighting to Classic models later or upgrade to Sport grilles? No, the Classic and Sport models use different grille assemblies and speaker designs. Classic models do not have LED components integrated into the speaker assembly, so you cannot add lighting later without replacing the entire speaker. If RGB LED lighting is important to your installation, choose Sport models initially. The Classic model is the correct choice when LED lighting is not desired and traditional marine aesthetics are preferred. Consider your long-term preferences during initial purchase as retrofitting lighting is not feasible.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03062-00 M3 Marine Speakers - 6.5" Marine Coaxial Speakers with LED and Grey Sport Grille Premium 6.5-inch marine coaxial speakers with integrated RGB LED lighting, mica-filled polypropylene cone, and silk dome tweeter designed for demanding marine environments. Product Overview The JL Audio M3 6.5" Marine Speakers (JLA-010-03062-00) deliver exceptional audio performance with integrated RGB LED lighting in a robust coaxial design engineered specifically for harsh marine environments. These premium marine speakers feature Grey Sport grilles with RGB LED illumination that creates impressive visual effects during evening operation while delivering serious audio performance. The mica-filled polypropylene cone resists UV degradation and saltwater corrosion while maintaining excellent bass response down to 55 Hz. Paired with a 0.75-inch silk dome tweeter, these speakers produce smooth, detailed high-frequency reproduction that cuts through wind and water noise. Rated at 60 watts RMS continuous power handling with 89.5 dB sensitivity, the M3 speakers deliver impressive output when powered by 20-120 watts per channel from dedicated marine amplification. The extended frequency response (55 Hz-25 kHz) covers the full audible spectrum for complete musical reproduction without the immediate need for subwoofers in many installations. Compact mounting dimensions fit standard 5-5.25" cutouts with only 2.78" mounting depth clearance, making them ideal for helm positions, cockpit areas, cabin installations, and dash mounting in boats, personal watercraft, and powersports vehicles. Sold as a pair with attached Grey Sport grilles, stainless steel mounting hardware, RGB LED flying leads, logo badges, and mounting template included, the M3 speakers represent excellent value for marine audio enthusiasts seeking performance, durability, and style. Features & Benefits Marine-grade construction features mica-filled polypropylene cone that resists UV degradation from constant sun exposure, saltwater corrosion, humidity, and temperature extremes, ensuring long-term performance and reliability in harsh marine environments. Integrated RGB LED lighting illuminates the Grey Sport grille with customizable colors (red, green, blue, and combinations), creating impressive visual effects that enhance boat aesthetics during evening operation and low-light conditions. The 0.75-inch (19mm) silk dome tweeter delivers smooth, detailed high-frequency reproduction without harshness, maintaining clarity and intelligibility even at higher volume levels necessary to overcome engine noise and wind. Impressive 89.5 dB sensitivity ensures efficient output, producing substantial volume levels without requiring excessive amplifier power, ideal for marine environments where clean, efficient power delivery is critical. Extended frequency response (55 Hz-25 kHz) with bass extension down to 55 Hz provides full-range performance including solid mid-bass reproduction, reducing the immediate need for subwoofers in space-constrained installations. 60-watt RMS power handling with 20-120W recommended amplifier range accommodates everything from head unit power to dedicated marine amplification for maximum flexibility. 4-ohm nominal impedance matches standard marine amplifiers and head unit outputs for optimal power transfer and compatibility. Compact mounting dimensions fit standard 5-5.25" mounting holes with only 2.78" depth clearance behind mounting surface, enabling installation in tight locations including helm positions, dash panels, cockpit areas, and small boat installations. Spade connector speaker terminals provide secure connections that resist vibration and corrosion better than bare wire connections. Grey Sport grille provides sophisticated aesthetic that complements modern boat styling while RGB LED illumination enhances visual appeal. Included stainless steel mounting hardware resists corrosion in saltwater environments. Mounting template simplifies installation by ensuring accurate cutout dimensions and hole spacing. Technical Specifications Specification Details Model JLA-010-03062-00 M3 Marine Speakers Configuration Coaxial Marine Speaker Speaker Size 6.5 inches Grille Style Grey Sport with RGB LED LED Lighting RGB (red, green, blue) Quantity 2 speakers (pair) Power Handling (RMS) 60 watts per speaker Recommended Amp Power 20-120W RMS per channel Sensitivity 89.5 dB @ 1W/1m Frequency Response 55 Hz - 25 kHz (±3dB) Nominal Impedance 4 ohms Woofer Cone Material Mica-filled polypropylene Tweeter Type Silk dome Tweeter Size 19 mm (0.75 inches) LED Supply Voltage 10-14.4 VDC LED Current Draw (Max) 108 mA @ 14.4 VDC per speaker Overall Diameter 175 mm (6.90 inches) Overall Depth 96 mm (3.79 inches) Mounting Depth Required 71 mm (2.78 inches) Grille Protrusion 26 mm (1.01 inches) Mounting Hole 127-133 mm (5"-5.25") Bolt Hole Circle 156 mm (6.125 inches) Speaker Connections Spade connectors LED Connection Flying lead, 4-conductor 22 AWG Marine Environment UV and saltwater corrosion resistant Warranty 3 years Included Accessories 2x grilles (attached), 12x stainless screws, 12x stainless washers, mounting template, logo badges Compatible With / Goes Well With JL Audio Marine Amplifiers: MX Marine and Powersports Amplifiers (MX280/4, MX600/3), MVi Marine Amplifiers, MHD Marine Amplifiers, XDM Car and Marine Amplifiers, AP Amplifiers, AP Amplifiers with Bluetooth for dedicated amplification delivering 20-120W per channel JL Audio Source Units: MediaMaster 55 Stereo (can power directly with built-in amplification or via external amp), MediaMaster 105 Stereo for multi-zone control with dedicated speaker zones JL Audio Marine Subwoofers: M3 Marine Subwoofer models for dedicated bass reproduction complementing M3 speaker full-range performance, particularly for installations requiring maximum low-end impact beyond speaker bass extension System Integration: Fusion Apollo MS-RA800 marine stereo for alternative source unit, RGB LED controllers for synchronized lighting effects with other boat lighting systems Installation Applications: Helm speaker positions in center console boats, cockpit speaker installations in bowriders and cruisers, dash mounting in personal watercraft and jet skis, cabin speaker installations, UTV and ATV audio systems, side-by-side vehicles, any marine or powersports application requiring 6.5" speakers Installation Requirements: 5-5.25" mounting hole cutout, minimum 2.78" clearance behind mounting surface, amplification providing 20-120W RMS per channel for optimal performance, RGB LED controller for color selection and lighting effects (sold separately), proper marine wiring and corrosion-resistant connections Frequently Asked Questions Can I power these speakers directly from the MediaMaster 55's built-in amplification? Yes, the MediaMaster 55's built-in 25W x 4 amplification can power the M3 speakers directly. The MM55 delivers 25 watts per channel at 2 ohms, falling within the M3's 20-120W recommended range. This provides moderate volume levels suitable for small to mid-size boats. For maximum performance and output capability, especially in larger boats or outdoor environments requiring high volume, consider external amplification delivering 70-120 watts per channel to fully utilize the M3's 60W power handling and maximize sound projection. How do I control the RGB LED lighting colors? The RGB LEDs connect to your boat's 12V DC electrical system (10-14.4V) via the included 4-conductor 22 AWG flying lead and require an RGB LED controller (sold separately) to change colors and create lighting effects. Without a controller, LEDs illuminate in a default color. Marine-specific RGB controllers offer wireless control via smartphone apps, enabling color selection, brightness adjustment, and synchronized effects with other boat lighting. The 108mA current draw per speaker (216mA for a pair) adds minimal electrical load to your system. What's the difference between the M3 Grey Sport and White Classic or White Sport models? All M3 6.5" models deliver identical audio performance (60W RMS, 89.5 dB sensitivity, 55 Hz-25 kHz response). The differences are purely aesthetic: Grey Sport features grey grille styling with RGB LED lighting; White Sport features white grille styling with RGB LED lighting; White Classic features traditional white grille without LED lighting. Choose Grey Sport for modern grey/dark aesthetics with RGB capability, White Sport for traditional white marine aesthetics with RGB capability, or White Classic for traditional white appearance without LED complexity. The Grey Sport complements modern boat color schemes with darker tones. Will these speakers fit my existing 6.5" speaker locations? The M3 speakers fit standard 5-5.25" mounting holes with 6.125" bolt hole circle, accommodating most marine and automotive 6.5" speaker locations. Critical measurements: mounting hole 127-133mm (5-5.25"), depth required 71mm (2.78"), overall diameter 175mm (6.90"). Verify your existing cutout dimensions and behind-panel clearance before purchasing. The included mounting template simplifies verification—place it over your existing opening to confirm fitment. Most factory marine speaker locations accommodate these dimensions, but custom installations should be measured carefully. How does the M3 6.5" compare to M6 6.5" marine speakers? The M3 series represents JL Audio's mid-tier marine speakers with 60W RMS power handling, RGB LED lighting (Sport models), mica-filled polypropylene cone, and 19mm silk dome tweeter. The M6 series offers premium features including 75W RMS power handling, larger 20mm silk dome tweeter, advanced component design options, and potentially different grille materials. Both deliver excellent marine audio performance with similar frequency response. Choose M3 for outstanding value and performance with RGB lighting capability. Choose M6 for maximum power handling and premium component designs. For most marine applications, the M3 delivers exceptional performance at excellent value.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03068-00 M3 Marine Speakers - 7.7" Marine Coaxial Speakers with White Sport Grille Premium 7.7-inch marine coaxial speakers with integrated RGB LED lighting, extended bass response to 45Hz, and high-output design for demanding marine environments. Product Overview The JL Audio M3 7.7" Marine Speakers (JLA-010-03068-00) deliver exceptional audio performance with integrated RGB LED lighting in a high-output coaxial design engineered specifically for demanding marine environments. These premium marine speakers feature White Sport grilles with RGB LED illumination that creates impressive visual effects during evening operation while delivering serious audio performance. The larger 7.7-inch woofer extends bass response down to 45 Hz—10 Hz lower than 6.5" models—providing deeper low-frequency reproduction that approaches dedicated subwoofer territory. The mica-filled polypropylene cone resists UV degradation and saltwater corrosion while maintaining excellent bass response and midrange clarity. Paired with a 0.75-inch silk dome tweeter, these speakers produce smooth, detailed high-frequency reproduction that cuts through wind and water noise. Rated at 70 watts RMS continuous power handling with impressive 90.5 dB sensitivity, the M3 7.7" speakers deliver substantial output when powered by 20-140 watts per channel from dedicated marine amplification. The extended frequency response (45 Hz-25 kHz) covers the full audible spectrum with impressive bass extension, reducing the immediate need for subwoofers in many installations. Mounting dimensions accommodate 6.25" cutouts with 3.17" mounting depth clearance, making them ideal for cockpit areas, helm positions where larger speakers fit, cabin installations, and locations requiring maximum output. Sold as a pair with attached White Sport grilles, stainless steel mounting hardware, RGB LED flying leads, logo badges, and mounting template included, the M3 7.7" speakers represent the premium option in JL Audio's M3 marine speaker lineup for installations prioritizing maximum output and bass extension. Features & Benefits The larger 7.7-inch woofer delivers significantly enhanced bass extension down to 45 Hz compared to 6.5" models (55 Hz), providing deep low-frequency reproduction that reduces the need for subwoofers in space-constrained installations and approaches dedicated subwoofer bass response. Marine-grade construction features mica-filled polypropylene cone that resists UV degradation from constant sun exposure, saltwater corrosion, humidity, and temperature extremes, ensuring long-term performance and reliability in harsh marine environments. Integrated RGB LED lighting illuminates the White Sport grille with customizable colors (red, green, blue, and combinations), creating impressive visual effects that enhance boat aesthetics during evening operation and low-light conditions while maintaining traditional white marine styling. The 0.75-inch (19mm) silk dome tweeter delivers smooth, detailed high-frequency reproduction without harshness, maintaining clarity and intelligibility even at higher volume levels necessary to overcome engine noise and wind. Superior 90.5 dB sensitivity—1 dB higher than 6.5" models—ensures exceptional output efficiency, producing substantial volume levels without requiring excessive amplifier power, ideal for marine environments where maximum sound projection is critical. Extended frequency response (45 Hz-25 kHz) with deep bass extension provides full-range performance including powerful low-frequency impact, significantly reducing reliance on subwoofers for complete musical reproduction. Enhanced 70-watt RMS power handling with 20-140W recommended amplifier range accommodates dedicated marine amplification for maximum output capability in larger boats or outdoor environments. 4-ohm nominal impedance matches standard marine amplifiers and provides optimal power transfer for efficient operation. Mounting dimensions accommodate 6.25" mounting holes with 3.17" depth clearance, fitting locations where larger speakers deliver benefits including cockpit seating areas, cabin installations, and helm positions with adequate mounting space. Spade connector speaker terminals provide secure connections that resist vibration and corrosion better than bare wire connections. White Sport grille provides traditional marine aesthetics that complement white gel coat hulls and classic boat styling while RGB LED illumination enhances visual appeal. Included stainless steel mounting hardware resists corrosion in saltwater environments. Mounting template simplifies installation by ensuring accurate cutout dimensions and hole spacing. Technical Specifications Specification Details Model JLA-010-03068-00 M3 Marine Speakers Configuration Coaxial Marine Speaker Speaker Size 7.7 inches Grille Style White Sport with RGB LED LED Lighting RGB (red, green, blue) Quantity 2 speakers (pair) Power Handling (RMS) 70 watts per speaker Recommended Amp Power 20-140W RMS per channel Sensitivity 90.5 dB @ 1W/1m Frequency Response 45 Hz - 25 kHz (±3dB) Nominal Impedance 4 ohms Woofer Cone Material Mica-filled polypropylene Tweeter Type Silk dome Tweeter Size 19 mm (0.75 inches) LED Supply Voltage 10-14.4 VDC LED Current Draw (Max) 108 mA @ 14.4 VDC per speaker Overall Diameter 196 mm (7.70 inches) Overall Depth 108 mm (4.27 inches) Mounting Depth Required 81 mm (3.17 inches) Grille Protrusion 28 mm (1.10 inches) Mounting Hole 159 mm (6.25 inches) Bolt Hole Circle 176 mm (6.92 inches) Speaker Connections Spade connectors LED Connection Flying lead, 4-conductor 22 AWG Marine Environment UV and saltwater corrosion resistant Warranty 3 years Included Accessories 2x grilles (attached), 12x stainless screws, 12x stainless washers, mounting template, logo badges Compatible With / Goes Well With JL Audio Marine Amplifiers: MX Marine and Powersports Amplifiers (MX280/4, MX600/3), MVi Marine Amplifiers, MHD Marine Amplifiers, XDM Car and Marine Amplifiers, AP Amplifiers, AP Amplifiers with Bluetooth for dedicated amplification delivering 20-140W per channel JL Audio Source Units: MediaMaster 55 Stereo (requires external amplification for optimal 7.7" performance), MediaMaster 105 Stereo for multi-zone control with dedicated speaker zones JL Audio Marine Subwoofers: M3 Marine Subwoofer models for dedicated bass reproduction complementing M3 7.7" speaker performance, particularly for installations requiring maximum low-end impact beyond the impressive 45Hz bass extension System Integration: Fusion Apollo MS-RA800 marine stereo for alternative source unit, RGB LED controllers for synchronized lighting effects with other boat lighting systems Installation Applications: Cockpit speaker installations in bowriders and cruisers requiring maximum output, helm positions with adequate mounting space for larger speakers, cabin speaker installations in cruisers and express boats, larger center console boats, deck boats, pontoon boats, any marine application requiring 7.7" speakers with deep bass extension Installation Requirements: 6.25" mounting hole cutout, minimum 3.17" clearance behind mounting surface, amplification providing 20-140W RMS per channel for optimal performance, RGB LED controller for color selection and lighting effects (sold separately), proper marine wiring and corrosion-resistant connections Frequently Asked Questions How does the 7.7" M3 compare to the 6.5" M3 for bass performance? The 7.7" model delivers significantly deeper bass extension to 45 Hz compared to the 6.5" model's 55 Hz lower limit—a 10 Hz improvement that provides noticeably more powerful low-frequency impact. The larger woofer cone also moves more air, producing greater bass output at the same power level. Additionally, the 7.7" offers higher power handling (70W vs 60W) and better sensitivity (90.5 dB vs 89.5 dB). For installations prioritizing maximum bass without subwoofers or requiring highest output levels, the 7.7" significantly outperforms the 6.5". However, it requires larger cutouts (6.25" vs 5-5.25") and more mounting depth (3.17" vs 2.78"). Will these speakers eliminate the need for a marine subwoofer? The 7.7" M3's impressive 45 Hz bass extension approaches subwoofer territory and may eliminate subwoofer needs for many listeners, particularly in smaller boats or for musical genres not heavily bass-dependent. However, dedicated subwoofers still reproduce frequencies below 45 Hz and provide greater bass impact through larger drivers and dedicated amplification. For casual listening and most musical genres, the 7.7" provides satisfying bass. For maximum bass impact during watersports, electronic music, hip-hop, or larger boats requiring serious low-end output, adding a marine subwoofer still offers benefits beyond the 7.7"'s capabilities. Can I replace existing 6.5" speakers with these 7.7" models? Only if your existing 6.5" location accommodates the larger 6.25" mounting hole and 3.17" mounting depth requirements. The 7.7" requires approximately 1" larger cutout diameter and 0.4" more depth than standard 6.5" speakers. Before purchasing, measure your existing cutout and behind-panel clearance. Use the included mounting template to verify fitment. Many factory 6.5" locations cannot accommodate 7.7" speakers without modification. If your location has adequate space, upgrading to 7.7" provides significant performance improvements including deeper bass, higher output, and greater power handling. What amplifier power should I use to maximize these speakers' potential? For maximum performance, use 100-140 watts RMS per channel of clean amplifier power. This fully utilizes the 70W power handling while providing headroom for dynamic peaks. The high 90.5 dB sensitivity means these speakers produce impressive output even with moderate power—50-75 watts per channel delivers good performance. However, marine environments with wind, water, and engine noise benefit from higher power for maximum sound projection. Under-powering with 20-40 watts limits potential; over-powering beyond 140 watts continuously risks thermal damage. Clean, undistorted power from quality marine amplifiers is more important than maximum wattage. Does the White Sport grille work well with darker boat colors or should I choose Grey Sport? The White Sport grille provides traditional marine aesthetics that work well with white gel coat hulls, white towers, and classic boat styling common in the marine industry. For boats with darker hulls, modern color schemes, or darker interior appointments, the Grey Sport grille may provide better aesthetic integration. Both deliver identical audio performance and RGB LED functionality—the choice is purely aesthetic. Consider your boat's overall color scheme, existing speaker grille colors, and personal preference. White Sport maintains timeless marine appearance; Grey Sport offers modern contrast particularly on boats with grey or dark accents.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03264-00 M3 Marine Subwoofer - 10" Marine Subwoofer with LED and Grey Sport Grille Premium 10-inch marine subwoofer with integrated RGB LED lighting, infinite baffle design, and 175-watt power handling for powerful bass reproduction in marine environments. Product Overview The JL Audio M3 10" Marine Subwoofer (JLA-010-03264-00) delivers powerful, accurate bass reproduction specifically engineered for demanding marine environments. This premium marine subwoofer features a Grey Sport grille with integrated RGB LED lighting that creates impressive visual effects during evening operation while delivering serious low-frequency performance. The infinite baffle design enables installation without requiring dedicated sealed or ported enclosures, simplifying installation by allowing free-air mounting in storage compartments, under seats, behind panels, or in any location with adequate rear volume. The mica-filled polypropylene cone resists UV degradation and saltwater corrosion while delivering excellent bass response and long excursion capability. Rated at 175 watts RMS continuous power handling with 50-175W recommended amplifier power, this subwoofer produces substantial bass output when properly powered. The 10.7mm one-way linear excursion (Xmax) enables deep, distortion-free bass reproduction even at higher volume levels. For sealed enclosure installations, the optimized 56.6-liter net internal volume delivers excellent transient response with 42.9 Hz F3 low-frequency extension. The 4-ohm nominal impedance matches standard monoblock marine amplifiers for optimal power transfer. Spade connector terminals provide secure connections resistant to marine vibration and corrosion. Sold individually with Grey Sport grille, stainless steel mounting hardware, RGB LED flying lead, and logo badge included, the M3 10" marine subwoofer represents the ideal solution for boats requiring powerful bass reproduction with modern styling and visual impact. Features & Benefits Infinite baffle design enables free-air installation without requiring sealed or ported enclosures, simplifying installation by allowing mounting in storage compartments, under seats, behind cabin panels, or any location with adequate rear volume (typically large enclosed spaces like engine compartments or cabin areas). Marine-grade construction features mica-filled polypropylene cone that resists UV degradation from sun exposure, saltwater corrosion, humidity, and temperature extremes, ensuring long-term performance and reliability in harsh marine environments. Integrated RGB LED lighting illuminates the Grey Sport grille with customizable colors (red, green, blue, and combinations), creating impressive visual effects that enhance boat aesthetics during evening operation and low-light conditions. Substantial 175-watt RMS power handling with 50-175W recommended amplifier range accommodates everything from compact monoblock amplifiers to high-output marine subwoofer amplification for maximum bass impact. Generous 10.7mm one-way linear excursion (Xmax) enables deep, distortion-free bass reproduction by allowing large cone movement without exceeding mechanical limits, critical for producing powerful low-frequency output in outdoor marine environments. Well-damped infinite baffle parameters (Qts 0.754) ensure controlled bass response without excessive boominess when properly installed in adequate rear volume. Sealed enclosure compatibility with optimized 56.6-liter net internal volume delivers tight, accurate bass with 42.9 Hz F3 extension for installations where dedicated sealed enclosures are preferred. 4-ohm nominal impedance matches standard monoblock marine amplifiers and provides optimal power transfer for efficient bass reproduction. Spade connector terminals provide secure electrical connections that resist vibration and corrosion better than bare wire connections in marine environments. Grey Sport grille provides sophisticated modern aesthetic that complements contemporary boat styling while RGB LED illumination enhances visual appeal. Low-profile grille protrusion (40mm / 1.58") minimizes installation depth requirements from mounting surface. Mounting dimensions accommodate 8.875" cutouts with 5" mounting depth clearance, fitting most marine subwoofer locations. Stainless steel mounting hardware resists saltwater corrosion for long-term secure installation. Technical Specifications Specification Details Model JLA-010-03264-00 M3 Marine Subwoofer Configuration Infinite Baffle Marine Subwoofer Subwoofer Size 10 inches Grille Style Grey Sport with RGB LED LED Lighting RGB (red, green, blue) Quantity 1 subwoofer (sold individually) Power Handling (RMS) 175 watts Recommended Amp Power 50-175W RMS Sensitivity 87.23 dB @ 1W/1m Nominal Impedance 4 ohms Cone Material Mica-filled polypropylene One-Way Xmax 10.7 mm (0.42 inches) Free Air Resonance (Fs) 41.84 Hz Total Q (Qts) 0.754 Equivalent Volume (Vas) 36.53 liters Effective Piston Area (Sd) 0.0327 m² DC Resistance (Re) 3.957 ohms LED Supply Voltage 10-14.4 VDC LED Current Draw (Max) 108 mA @ 14.4 VDC Overall Diameter 273 mm (10.75 inches) Overall Depth 203 mm (6.58 inches) Mounting Depth Required 127 mm (5.0 inches) Grille Protrusion 40 mm (1.58 inches) Mounting Hole 225 mm (8.875 inches) Bolt Hole Circle 247 mm (9.71 inches) Driver Displacement 0.052 cu ft (1.47 liters) Sealed Enclosure Volume 56.6 liters net internal Sealed F3 (-3dB) 42.9 Hz Sealed Fc (resonance) 53.66 Hz Sealed Qtc 0.967 Speaker Connections Spade connectors LED Connection Flying lead, 4-conductor 22 AWG Weight 2.94 kg (6.5 lbs) Marine Environment UV and saltwater corrosion resistant Warranty 3 years Included Accessories Grille (attached), 6x stainless screws, 6x stainless washers, logo badge Compatible With / Goes Well With JL Audio Marine Amplifiers: MX Marine and Powersports Amplifiers - specifically MX300/1 or MX500/1 monoblocks for subwoofer amplification delivering 50-175W RMS, MVi Marine Amplifiers with dedicated subwoofer channels, MHD Marine Amplifiers, XDM Car and Marine Amplifiers, AP Amplifiers with subwoofer capability JL Audio Source Units: MediaMaster 55 Stereo with external subwoofer amplification, MediaMaster 105 Stereo with dedicated subwoofer zone control for multi-zone bass management JL Audio Marine Speakers: M3 Marine Speakers (6.5" or 7.7" models), M3 Enclosed Tower Speakers, VeX Enclosed System for complete full-range and bass reproduction throughout vessel System Integration: Fusion Apollo MS-RA800 marine stereo for alternative source unit, RGB LED controllers for synchronized lighting effects with other boat lighting systems, M-RBC-1 or MHD-RLC remote bass controls for cockpit-accessible subwoofer level adjustment Installation Applications: Free-air mounting in large storage compartments, under-seat installations with adequate rear volume, behind-panel cabin installations, sealed enclosure construction for optimized bass response, cockpit installations where bass reinforcement is needed Installation Requirements: Monoblock amplification providing 50-175W RMS, 8.875" mounting hole cutout, minimum 5" clearance behind mounting surface, adequate rear volume for infinite baffle operation (large enclosed space) OR sealed enclosure construction per specifications (56.6L net internal volume), RGB LED controller for color selection and lighting effects (sold separately) Frequently Asked Questions What's the difference between infinite baffle and sealed enclosure installation for this subwoofer? Infinite baffle installation mounts the subwoofer in a large enclosed space (storage compartment, under seat with cabin volume behind it, engine compartment) without a dedicated sealed enclosure, relying on the boat's existing volume as the "enclosure." This simplifies installation but requires adequate rear volume and may produce slightly less controlled bass. Sealed enclosure installation uses a dedicated sealed box with 56.6 liters net internal volume, providing tighter, more controlled bass with optimized 42.9 Hz F3 response and better transient response. Choose infinite baffle for simplified installation; choose sealed enclosure for optimum performance and tighter bass control. Can I power this subwoofer with the MediaMaster 55's built-in amplification? No, the MediaMaster 55's built-in amplification is designed for full-range speakers, not subwoofers. The M3 subwoofer requires dedicated monoblock amplification providing 50-175W RMS. The MediaMaster 55 (and MM105) have dedicated subwoofer RCA pre-outputs specifically for connecting to external monoblock amplifiers like the MX300/1, MX500/1, or other JL Audio monoblocks. Use the source unit's subwoofer output connected to a monoblock amplifier which then powers the M3 subwoofer. How do I control the RGB LED lighting colors? The RGB LEDs connect to your boat's 12V DC electrical system (10-14.4V) via the included 4-conductor 22 AWG flying lead and require an RGB LED controller (sold separately) to change colors and create lighting effects. Without a controller, LEDs illuminate in a default color. Marine-specific RGB controllers offer wireless control via smartphone apps, enabling color selection, brightness adjustment, and synchronized effects with other boat RGB lighting including speakers, underwater lights, and accent lighting. The 108mA current draw adds minimal electrical load. What rear volume is required for infinite baffle installation? For infinite baffle installations, the rear volume should ideally be several times the driver's Vas (36.53 liters). A minimum of 150-200 liters (approximately 5-7 cubic feet) of rear volume is recommended for proper infinite baffle operation, though larger volumes (300+ liters) provide better performance. Common infinite baffle locations include large storage compartments, under-seat areas with cabin volume access, or engine compartments. Ensure the rear volume is reasonably sealed from the front to prevent front-to-rear wave cancellation. For smaller available volumes, build a sealed enclosure per specifications instead. How does the M3 10" compare to larger 12" marine subwoofers? The M3 10" offers 175W power handling, 10.7mm Xmax, and 42.9 Hz F3 in sealed enclosures with more compact installation requirements (8.875" mounting hole, 5" depth). Larger 12" subwoofers typically offer higher power handling (200-300W+), greater Xmax for deeper bass, lower frequency extension, and greater output capability, but require larger mounting holes (typically 11"+) and more depth clearance (6"+). Choose the 10" for space-constrained installations, moderate power systems (up to 175W), or boats where compact subwoofer mounting is critical. Choose 12" models for maximum bass output, lowest frequency extension, and installations accommodating larger dimensions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03265-00 M3 Marine Subwoofer - 10" Marine Subwoofer with LED and White Sport Grille Premium 10-inch marine subwoofer with integrated RGB LED lighting, infinite baffle design, and 175-watt power handling for powerful bass reproduction in traditional white marine styling. Product Overview The JL Audio M3 10" Marine Subwoofer (JLA-010-03265-00) delivers powerful, accurate bass reproduction specifically engineered for demanding marine environments with traditional white marine aesthetics. This premium marine subwoofer features a White Sport grille with integrated RGB LED lighting that creates impressive visual effects during evening operation while maintaining classic marine styling and delivering serious low-frequency performance. The infinite baffle design enables installation without requiring dedicated sealed or ported enclosures, simplifying installation by allowing free-air mounting in storage compartments, under seats, behind panels, or in any location with adequate rear volume. The mica-filled polypropylene cone resists UV degradation and saltwater corrosion while delivering excellent bass response and long excursion capability. Rated at 175 watts RMS continuous power handling with 50-175W recommended amplifier power, this subwoofer produces substantial bass output when properly powered. The 10.7mm one-way linear excursion (Xmax) enables deep, distortion-free bass reproduction even at higher volume levels. For sealed enclosure installations, the optimized 56.6-liter net internal volume delivers excellent transient response with 42.9 Hz F3 low-frequency extension. The 4-ohm nominal impedance matches standard monoblock marine amplifiers for optimal power transfer. Spade connector terminals provide secure connections resistant to marine vibration and corrosion. Sold individually with White Sport grille, stainless steel mounting hardware, RGB LED flying lead, and logo badge included, the M3 10" marine subwoofer with White Sport grille combines traditional marine appearance with modern LED lighting technology for powerful bass reproduction in boats prioritizing classic styling. Features & Benefits Infinite baffle design enables free-air installation without requiring sealed or ported enclosures, simplifying installation by allowing mounting in storage compartments, under seats, behind cabin panels, or any location with adequate rear volume (typically large enclosed spaces like engine compartments or cabin areas). Marine-grade construction features mica-filled polypropylene cone that resists UV degradation from sun exposure, saltwater corrosion, humidity, and temperature extremes, ensuring long-term performance and reliability in harsh marine environments. Integrated RGB LED lighting illuminates the White Sport grille with customizable colors (red, green, blue, and combinations), creating impressive visual effects that enhance boat aesthetics during evening operation while maintaining traditional white marine styling during daytime. White Sport grille provides timeless marine aesthetics that complement white gel coat hulls, white towers, and classic boat styling common throughout the marine industry. Substantial 175-watt RMS power handling with 50-175W recommended amplifier range accommodates everything from compact monoblock amplifiers to high-output marine subwoofer amplification for maximum bass impact. Generous 10.7mm one-way linear excursion (Xmax) enables deep, distortion-free bass reproduction by allowing large cone movement without exceeding mechanical limits, critical for producing powerful low-frequency output in outdoor marine environments. Well-damped infinite baffle parameters (Qts 0.754) ensure controlled bass response without excessive boominess when properly installed in adequate rear volume. Sealed enclosure compatibility with optimized 56.6-liter net internal volume delivers tight, accurate bass with 42.9 Hz F3 extension for installations where dedicated sealed enclosures are preferred. 4-ohm nominal impedance matches standard monoblock marine amplifiers and provides optimal power transfer for efficient bass reproduction. Spade connector terminals provide secure electrical connections that resist vibration and corrosion better than bare wire connections in marine environments. Low-profile grille protrusion (40mm / 1.58") minimizes installation depth requirements from mounting surface. Mounting dimensions accommodate 8.875" cutouts with 5" mounting depth clearance, fitting most marine subwoofer locations. Stainless steel mounting hardware resists saltwater corrosion for long-term secure installation. Technical Specifications Specification Details Model JLA-010-03265-00 M3 Marine Subwoofer Configuration Infinite Baffle Marine Subwoofer Subwoofer Size 10 inches Grille Style White Sport with RGB LED LED Lighting RGB (red, green, blue) Quantity 1 subwoofer (sold individually) Power Handling (RMS) 175 watts Recommended Amp Power 50-175W RMS Sensitivity 87.23 dB @ 1W/1m Nominal Impedance 4 ohms Cone Material Mica-filled polypropylene One-Way Xmax 10.7 mm (0.42 inches) Free Air Resonance (Fs) 41.84 Hz Total Q (Qts) 0.754 Equivalent Volume (Vas) 36.53 liters Effective Piston Area (Sd) 0.0327 m² DC Resistance (Re) 3.957 ohms LED Supply Voltage 10-14.4 VDC LED Current Draw (Max) 108 mA @ 14.4 VDC Overall Diameter 273 mm (10.75 inches) Overall Depth 203 mm (6.58 inches) Mounting Depth Required 127 mm (5.0 inches) Grille Protrusion 40 mm (1.58 inches) Mounting Hole 225 mm (8.875 inches) Bolt Hole Circle 247 mm (9.71 inches) Driver Displacement 0.052 cu ft (1.47 liters) Sealed Enclosure Volume 56.6 liters net internal Sealed F3 (-3dB) 42.9 Hz Sealed Fc (resonance) 53.66 Hz Sealed Qtc 0.967 Speaker Connections Spade connectors LED Connection Flying lead, 4-conductor 22 AWG Weight 2.94 kg (6.5 lbs) Marine Environment UV and saltwater corrosion resistant Warranty 3 years Included Accessories Grille (attached), 6x stainless screws, 6x stainless washers, logo badge Compatible With / Goes Well With JL Audio Marine Amplifiers: MX Marine and Powersports Amplifiers - specifically MX300/1 or MX500/1 monoblocks for subwoofer amplification delivering 50-175W RMS, MVi Marine Amplifiers with dedicated subwoofer channels, MHD Marine Amplifiers, XDM Car and Marine Amplifiers, AP Amplifiers with subwoofer capability JL Audio Source Units: MediaMaster 55 Stereo with external subwoofer amplification, MediaMaster 105 Stereo with dedicated subwoofer zone control for multi-zone bass management JL Audio Marine Speakers: M3 Marine Speakers (6.5" or 7.7" models), M3 Enclosed Tower Speakers, VeX Enclosed System for complete full-range and bass reproduction throughout vessel System Integration: Fusion Apollo MS-RA800 marine stereo for alternative source unit, RGB LED controllers for synchronized lighting effects with other boat lighting systems, M-RBC-1 or MHD-RLC remote bass controls for cockpit-accessible subwoofer level adjustment Installation Applications: Free-air mounting in large storage compartments, under-seat installations with adequate rear volume, behind-panel cabin installations, sealed enclosure construction for optimized bass response, cockpit installations where bass reinforcement is needed Installation Requirements: Monoblock amplification providing 50-175W RMS, 8.875" mounting hole cutout, minimum 5" clearance behind mounting surface, adequate rear volume for infinite baffle operation (large enclosed space) OR sealed enclosure construction per specifications (56.6L net internal volume), RGB LED controller for color selection and lighting effects (sold separately) Frequently Asked Questions What's the difference between White Sport and Grey Sport grille models? The White Sport and Grey Sport models are identical in audio performance, specifications, and LED functionality—the only difference is grille color. White Sport provides traditional marine aesthetics that complement white gel coat hulls, white towers, and classic boat styling common in the marine industry. Grey Sport offers modern contrast particularly for boats with grey or dark color schemes. Both feature RGB LED lighting with identical electrical specifications and lighting capabilities. Choose White Sport for traditional marine appearance that matches classic white boat styling; choose Grey Sport for contemporary aesthetics on boats with darker color schemes. Can I use this subwoofer without building a sealed enclosure? Yes, the M3 10" is designed for infinite baffle installation, meaning you can mount it in a large enclosed space (storage compartment, under seat with cabin volume, engine compartment) without building a dedicated sealed enclosure. The rear volume of your boat's existing structure acts as the "enclosure." Ensure adequate rear volume (150-200+ liters minimum) and reasonable sealing between front and rear to prevent wave cancellation. However, building a dedicated sealed enclosure per specifications (56.6L net internal) provides optimized performance with tighter bass control and 42.9 Hz F3 extension for best results. How does the White Sport grille with RGB LEDs look during daytime operation? During daytime, the White Sport grille maintains professional, traditional marine appearance identical to classic white marine subwoofer grilles. The RGB LEDs are not visible when unpowered or during bright sunlight, preserving clean aesthetics. The white grille blends seamlessly with white gel coat hulls and white interior appointments. At night or in low-light conditions, the RGB LEDs illuminate the grille with customizable colors, transforming appearance from traditional daytime styling to modern illuminated aesthetics during evening operation—providing best of both worlds for owners wanting traditional appearance with modern lighting capability. What monoblock amplifier do you recommend for this subwoofer? For optimal performance, the JL Audio MX500/1 monoblock amplifier (500W @ 2Ω, 300W @ 4Ω) provides excellent power matching, delivering clean power within the 50-175W recommended range while providing headroom for dynamic bass transients. The MX300/1 (300W @ 2Ω, 160W @ 4Ω) also works well for moderate bass output applications. Both MX monoblocks feature IPX7 waterproof rating, compact dimensions ideal for marine installations, and M-RBC-1 remote bass control compatibility for cockpit adjustment. Pair 4-ohm subwoofer impedance with monoblock 4-ohm output for proper impedance matching and maximum power transfer within the 175W RMS handling limit. Can I install two of these subwoofers for increased bass output? Yes, dual 10" M3 subwoofers provide significantly greater bass output and lower distortion at high volumes compared to a single subwoofer. Wire two 4-ohm subwoofers in parallel for 2-ohm total load, requiring monoblock amplification stable at 2 ohms delivering up to 350W total (175W per subwoofer). Alternatively, wire in series for 8-ohm load if your amplifier is not 2-ohm stable. Dual subwoofers also improve bass distribution throughout the boat and reduce individual driver excursion at any given output level, extending reliability. Ensure your monoblock amplifier can handle the combined impedance load and total power requirements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03856-00 M6 Enclosed Tower Speakers - 7.7" Marine Coaxial Speakers with White Classic Grille Premium 7.7-inch enclosed marine tower speaker system with enhanced 100-watt power handling, 25mm silk dome tweeter, and traditional White Classic grille for ultimate wakeboard tower audio performance. Product Overview The JL Audio M6 7.7" Enclosed Tower Speakers (JLA-010-03856-00) deliver premium audio performance specifically engineered for demanding wakeboard tower installations on boats. These high-output enclosed coaxial speakers combine exceptional power handling with extended low-frequency response (45 Hz-25 kHz) in acoustically optimized enclosures designed for maximum sound projection across water. The White Classic grille provides timeless traditional marine aesthetics without LED lighting, ideal for installations prioritizing clean appearance or avoiding additional electrical complexity. The sealed enclosure design protects speaker components from water spray, debris, and environmental contamination during aggressive watersports activities. Each system features a mica-filled polypropylene woofer cone that resists UV damage and saltwater corrosion, paired with a premium 1-inch (25mm) silk dome tweeter—significantly larger than the M3's 19mm tweeter—for exceptionally smooth high-frequency reproduction that cuts through wind and water noise with superior clarity. Rated at 100 watts RMS continuous power handling with impressive 91 dB sensitivity, these tower speakers deliver substantial output when powered by 40-200 watts per channel. The complete enclosed design eliminates the need for custom tower speaker fabrication while providing optimal acoustic loading for enhanced bass response compared to free-air tower speakers. Extended 10-foot flying leads with pre-attached speaker wire (16 AWG) simplify installation by providing adequate length for tower-to-amplifier routing. Sold as a pair with aluminum logo caps, silicone adhesive, and butt splice connectors included, these M6 enclosed tower speakers represent the premium tier of JL Audio's tower speaker offerings for boats requiring maximum output, extended bass response, and traditional marine styling without LED complexity. Features & Benefits The enclosed design eliminates the need for custom tower speaker pods, mounting brackets, or enclosure fabrication, providing a complete ready-to-install solution that saves installation time and ensures optimal acoustic performance specifically engineered for tower mounting. Acoustically optimized sealed enclosure provides proper rear loading for the 7.7-inch woofer, delivering significantly enhanced bass response (down to 45 Hz) compared to free-air tower speakers where bass output suffers from cancellation, critical for projecting powerful sound across water and wind. Premium 1-inch (25mm) silk dome tweeter—32% larger than M3's 19mm tweeter—delivers exceptionally smooth, detailed high-frequency reproduction with superior dispersion and clarity, maintaining intelligibility even at high volume levels necessary to reach riders behind the boat during watersports. Enhanced 100-watt RMS power handling provides 43% more capacity than M3 models (70W), enabling higher output levels without distortion or thermal compression during demanding playback sessions. Superior 91 dB sensitivity—0.5 dB higher than M3 models—ensures exceptional output efficiency, producing maximum volume levels with less amplifier power, ideal for tower installations where sound must project substantial distances across water. Marine-grade construction features mica-filled polypropylene cone that resists UV degradation from constant tower-mounted sun exposure, saltwater corrosion, and temperature extremes with maximum environmental exposure. Extended frequency response (45 Hz-25 kHz) with deep bass extension matches M3 tower speakers while providing enhanced power handling and tweeter performance for more demanding installations. White Classic grille provides timeless traditional marine aesthetics without LED lighting, ideal for installations prioritizing clean appearance, avoiding additional electrical wiring complexity, matching classic boat styling, or maximizing reliability by eliminating LED electrical systems. Recommended amplifier power range (40-200W RMS) accommodates everything from moderate-power systems to high-output installations for maximum sound projection across water to distant riders. 4-ohm nominal impedance matches standard marine amplifiers for optimal power transfer and compatibility. Extended 10-foot flying leads with pre-attached 16 AWG speaker wire provide adequate length for routing from tower mounting locations down to amplifiers without splicing or extensions, simplifying installation compared to Sport models requiring separate LED wiring. Compact tower mounting profile (7.70" diameter x 12.62" depth) fits most wakeboard tower tube diameters and mounting configurations. Aluminum logo caps add premium metallic branding detail to tower installations. Simplified wiring without LED connections reduces installation complexity and potential failure points in harsh tower-mounted marine environments subject to maximum exposure. Technical Specifications Specification Details Model JLA-010-03856-00 M6 Enclosed Tower Speakers Configuration Enclosed Coaxial Tower Speaker System Speaker Size 7.7 inches Grille Style White Classic (no LED) LED Lighting None (Classic model) Quantity 2 speakers (pair) Power Handling (RMS) 100 watts per speaker Recommended Amp Power 40-200W RMS per channel Sensitivity 91 dB @ 1W/1m Frequency Response 45 Hz - 25 kHz (±3dB) Nominal Impedance 4 ohms Woofer Cone Material Mica-filled polypropylene Tweeter Type Silk dome Tweeter Size 25 mm (1.0 inches) Enclosure Diameter 196 mm (7.70 inches) Enclosure Depth 321 mm (12.62 inches) Enclosure Type Sealed, acoustically optimized Speaker Wire Flying lead, 16 AWG, 10 feet LED Wire Not applicable (no LEDs) Marine Environment UV and saltwater corrosion resistant Warranty 3 years Included Accessories 2x aluminum logo caps, silicone adhesive, 8x red butt splices (22-18 AWG), 4x blue butt splices (16-14 AWG) Compatible With / Goes Well With JL Audio Marine Amplifiers: MVi Marine Amplifiers (monoblock and multi-channel models), MHD Marine Amplifiers, XDM Car and Marine Amplifiers for dedicated tower speaker amplification delivering 40-200W per channel JL Audio Source Units: MediaMaster 55 Stereo (requires external amplification for optimal M6 tower performance), MediaMaster 105 Stereo for multi-zone control with dedicated tower speaker zone JL Audio Marine Subwoofers: M6 Marine Subwoofer, M6 Marine Thin-Line Subwoofer, M7 Marine Subwoofer models for dedicated bass reproduction complementing M6 tower speaker full-range performance System Integration: Fusion Apollo MS-RA800 marine stereo for alternative source unit, tower speaker amplifiers for dedicated zone control Tower Applications: Wakeboard tower mounting on ski boats, wake boats, tournament ski boats, performance boats with towers, pontoon boats with tower structures, any vessel with tower requiring maximum audio projection with traditional marine styling Installation Requirements: Wakeboard tower with suitable mounting points (typically 2-2.5" diameter tubes), amplification providing 40-200W RMS per channel for optimal performance, tower mounting clamps or brackets (may be required depending on tower configuration), cable routing from tower to amplifier location Frequently Asked Questions How does the M6 7.7" compare to the M3 7.7" tower speakers? The M6 offers significant performance advantages: 100W RMS power handling (43% more than M3's 70W), larger 25mm silk dome tweeter (32% larger than M3's 19mm) for superior high-frequency clarity, better 91 dB sensitivity (0.5 dB higher than M3's 90.5 dB), and aluminum logo caps instead of Lexan appliqués. Both offer identical 45 Hz-25 kHz frequency response. The M6 represents the premium tier with enhanced power handling, superior tweeter performance, and higher-end aesthetics. Choose M6 for maximum output capability, best high-frequency reproduction, and premium tower installations. Choose M3 for excellent performance at lower cost when maximum output isn't required. Why choose the White Classic model without LED lighting? The White Classic model provides several advantages: traditional timeless marine aesthetics matching white gel coat hulls and classic boat styling, simplified installation with only speaker wire connections eliminating LED wiring complexity, improved reliability by removing LED electrical components subject to failure in harsh tower-mounted environments, and avoiding LED controller requirements and associated costs. For installations prioritizing maximum reliability, traditional appearance, or avoiding electrical complexity, the Classic model offers identical audio performance to Sport models with superior simplicity. LED lighting provides visual impact during evening operation but adds complexity and potential failure points. What amplifier power should I use for maximum tower speaker performance? For maximum performance projecting sound across water to distant riders, use 150-200 watts RMS per channel of clean amplifier power. This fully utilizes the 100W power handling while providing headroom for dynamic peaks. The excellent 91 dB sensitivity means these speakers produce impressive output even with moderate power—75-100 watts per channel delivers very good performance. However, tower applications benefit from higher power for maximum sound projection distances during watersports when riders are positioned far behind the boat. Clean, undistorted power from quality marine amplifiers is more important than maximum wattage ratings. Can I mount these speakers on towers with smaller tube diameters? The M6 7.7" enclosed speakers mount using universal tower speaker clamps or brackets designed for standard 2-2.5" diameter tower tubes (mounting hardware may be sold separately). The 7.70" diameter enclosure fits most tower configurations. For towers with tube diameters outside this range, verify mounting hardware compatibility before purchase. Custom mounting solutions may be required for non-standard tower configurations. The compact profile accommodates most wakeboard towers, ski towers, and bimini top support structures commonly found on performance boats, ski boats, and wake boats. How does the M6's 25mm tweeter improve sound compared to smaller tweeters? The larger 25mm (1-inch) silk dome tweeter moves significantly more air than smaller 19mm tweeters, producing higher output levels in the critical high-frequency range where clarity and intelligibility occur. The increased surface area improves dispersion, creating wider sound coverage so riders positioned at various angles from the tower still receive clear audio. The larger tweeter also handles higher power levels without distortion, maintaining clarity even when driving the speakers at maximum output during watersports. This results in noticeably better vocal intelligibility and cymbal detail when projecting sound across water compared to speakers with smaller tweeters.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less