Rockford Fosgate P2-2X12 Punch Dual P2 12" Vented Loaded Enclosure Dual 12s, 800 Watts, Ready to Rock Product Overview The Rockford Fosgate P2-2X12 is a dual 12" vented loaded enclosure housing two genuine Punch P2 subwoofers (P2D4-12), delivering 800 Watts RMS combined power handling in a single factory-built, computer-tuned enclosure. Pre-wired internally to a 1-ohm load, it is designed to be driven by a compatible high-output mono amplifier delivering genuine Punch P2 bass performance without the complexity of sourcing drivers and enclosures separately. Sitting between the entry-level P1 and the higher-output P3 in the Punch loaded enclosure range, the P2-2X12 offers more power handling than a P1 dual 12" setup while remaining a practical and accessible dual 12" solution for Australian vehicles with full boot space available. The same P2D4-12 drivers sold individually in the Punch range are factory-loaded here in a vented enclosure tuned via computer-aided design software, with a proprietary high-flow, low-noise port, 5/8" MDF construction, high-density carpet finish, and high-current 10 AWG compression binding posts completing a no-compromise dual 12" loaded enclosure. Key Specifications Subwoofers: Dual 12" Rockford Fosgate Punch P2 (P2D4-12) Woofer quantity: 2 Power handling: 800W RMS Pre-wired impedance: 1 ohm (internally wired) Enclosure type: Vented Construction: 5/8" MDF Finish: High-density carpet Port: Proprietary high-flow, low-noise Input terminals: Up to 10 AWG high-current compression binding posts Dimensions (H x W x D): 38.4 x 86.0 x 40.0 cm Shipping weight: 35.08 kg CEA-2031 compliant Features & Benefits Dual 12" Punch P2 drivers (P2D4-12): The same genuine P2D4-12 woofers available as standalone drivers, factory-loaded and tuned as a matched pair in a single vented enclosure. Identical P2 tonal performance to a custom build straight out of the box no enclosure building, no driver matching required. 800W RMS combined power handling: More power capacity than a P1 dual 12" setup, and a practical step up for Australian vehicles running a competent mid-range mono amplifier. Pre-wired to 1 ohm for maximum power delivery from compatible amplifiers. Vented enclosure for impactful bass output: The vented design produces higher output at the tuning frequency compared to a sealed enclosure, delivering the loud, high-impact bass response the P2-2X12 is built for in larger vehicle boot and cargo spaces. Proprietary high-flow, low-noise port: Engineered specifically for this enclosure to minimise air turbulence and chuffing at high excursion levels. Maintains clean, articulate bass output at sustained high-volume use a key quality differentiator over budget dual 12" vented enclosures. Computer-aided design tuning: Enclosure volume and port dimensions are calculated for the P2D4-12 driver pair, ensuring the vented alignment is optimised for the intended tuning frequency rather than approximated. Pre-wired to 1 ohm: Factory internal wiring presents a 1-ohm load to the amplifier. No internal wiring configuration required connect your amplifier to the 10 AWG binding posts and go. Positioned between P1 and P3 in the Punch loaded range: The P2-2X12 delivers more power handling than the P1 dual 12" setup and uses the same enclosure dimensions as the P3-2X12, making it the natural mid-range choice in the Punch dual 12" loaded enclosure lineup. CEA-2031 compliant: Power handling figures comply with the CEA-2031 standard for loaded subwoofer enclosures, providing a verified and comparable specification. 5/8" MDF construction: Rigid enclosure walls minimise panel flex, resonance, and vibration at sustained 800W RMS combined input essential for accurate bass reproduction at the output levels this enclosure is designed to handle. High-density carpet finish: Durable, professional appearance suited to daily boot and cargo area use in Australian vehicles. High-current 10 AWG compression binding posts: Appropriate for the current demands of an 800W RMS, 1-ohm system. Secure, tool-free connection at the wattage and current levels this enclosure operates at. Technical Specs Specification Detail SKU P2-2X12 Brand Rockford Fosgate Subwoofer Drivers 2 x 12" Rockford Fosgate Punch P2 (P2D4-12) Woofer Quantity 2 Power Handling 800W RMS Pre-Wired Impedance 1 ohm (internally wired) Enclosure Type Vented Port Type Proprietary high-flow, low-noise Construction Material 5/8" MDF Finish High-density carpet Input Terminals Up to 10 AWG high-current compression binding posts Enclosure Design Computer-aided design tuned CEA-2031 Compliant Yes Dimensions (H x W x D) 38.4 x 86.0 x 40.0 cm Shipping Weight 35.08 kg Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 1 ohm, rated at or near 800W RMS Rockford Fosgate Power and Punch series mono amplifiers Sedans, SUVs, wagons, and utes with full boot or cargo area space available Vehicles where P3-2X12 power handling exceeds the amplifier budget but dual 12" P2 output is the target Rockford Fosgate wiring kits rated for high-current 1-ohm mono amplifier installation Rockford Fosgate RCA cables and signal accessories Frequently Asked Questions What amplifier does the P2-2X12 require? The P2-2X12 is pre-wired to 1 ohm and handles 800W RMS combined. A mono amplifier stable at 1 ohm and rated at or near 800W RMS is recommended such as a compatible Rockford Fosgate Power or Punch mono amplifier. How does the P2-2X12 compare to the P3-2X12? Both enclosures share the same physical dimensions (38.4 x 86.0 x 40.0 cm) and dual 12" vented design. The P3-2X12 uses higher-pedigree P3D4-12 drivers with 1200W RMS combined power handling, while the P2-2X12 uses P2D4-12 drivers rated at 800W RMS combined making the P2-2X12 the more accessible option when a mid-range mono amplifier is in the system. Are the drivers in the P2-2X12 the same as the standalone P2 subwoofers? Yes. The P2-2X12 is loaded with genuine Rockford Fosgate P2D4-12 drivers the same woofers available separately in the Punch P2 range factory-loaded and tuned in a computer-optimised vented enclosure. Why does the P2-2X12 use a vented rather than sealed enclosure? The vented design produces higher output at the tuning frequency than a sealed enclosure, making it the preferred choice for maximum bass impact and volume in larger vehicle boot spaces. A sealed enclosure offers tighter, more accurate bass at lower output levels choose vented for impact, sealed for accuracy. Is the P2-2X12 suitable for daily boot use in an Australian vehicle? Yes, provided your vehicle has sufficient boot space (38.4 x 86.0 x 40.0 cm minimum clearance) and your electrical system supports a high-output 1-ohm mono amplifier. At 35.08 kg, two people are recommended for safe handling and installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P500-12P Punch 12" 500 Watt Powered Sub Enclosure When you need serious bass in a single self-contained package, the P500-12P combines a high-output 12" Punch woofer, a 500-watt Class D amplifier, and a precision vented MDF enclosure into one plug-and-play solution. Product Overview The P500-12P is Rockford Fosgate's all-in-one powered subwoofer enclosure, designed to deliver genuine low-end performance in hatchbacks, sedans, and SUVs without the complexity of a separate amplifier, enclosure, and wiring build. The 12" proprietary woofer is impedance-optimised specifically for the integrated 500-watt Class D amplifier in a closed-loop design, ensuring the driver and amplifier work together as a matched system from the factory. The vented slot-port enclosure is precision tuned for powerful output at lower frequencies, enhancing bass reproduction across the 30-200 Hz operating range. Control is straightforward: a variable Low-Pass crossover (50-200 Hz), an onboard Bass EQ with 0 to +12 dB of boost at 45 Hz, and a 0-180 degree phase switch sit on the amplifier plate, while the included Punch Level Control remote puts bass adjustment in the driver's hand. An intelligent auto turn-on/off circuit with three selectable modes (Remote Trigger, DC Offset Sense, and Audio Sense) eliminates the need for a dedicated remote turn-on wire in OEM installations. Quick-release input and power connectors allow the enclosure to be removed quickly when cargo space is needed. The MDF enclosure is precision constructed from 5/8" board and covered with a heat-activated vinyl finish to resist marks and scuffs. CEA-2006 (amplifier) and CEA-2031 (woofer) compliant, Klippel verified, with a 1-year warranty. Features & Benefits 500-Watt Class D Amplifier with Closed-Loop Design: The integrated amplifier is an impedance-matched, closed-loop Class D design tuned specifically for the P500-12P's proprietary 12" woofer, ensuring maximum efficiency and control over the driver at all output levels. Klippel Verified Woofer: The 12" proprietary woofer has been verified through the Klippel certification programme, which measures and corrects non-linear distortion parameters to deliver the best possible transient accuracy and low-frequency output from a compact, optimised driver. Intelligent Auto Turn-On/Off: Three selectable turn-on modes (Remote Trigger, DC Offset Sense, and Audio Sense) allow the P500-12P to power on automatically in any installation scenario, including factory head units without a dedicated remote output, eliminating additional wiring complexity. Variable Low-Pass Crossover: Continuously variable from 50 to 200 Hz at 12 dB/octave Butterworth, the onboard crossover integrates cleanly with full-range speakers at virtually any crossover point set by the main system amplifier or head unit. Onboard Bass EQ: 0 to +12 dB of bass boost at 45 Hz corrects for acoustic deficiencies in the vehicle interior and adds presence and depth to the low-frequency output without an external equaliser. Phase Switch: A 0 to 180 degree phase control allows the subwoofer to be time-aligned with the main speakers acoustically, compensating for physical placement and enclosure tuning differences to produce a coherent, integrated bass response. Included Punch Level Control Remote: The Punch Level Control is included in the box, allowing bass output to be adjusted from the driver's seat in real time without accessing the amplifier plate directly. Quick-Release Input and Power Connectors: Input and power connections use quick-disconnect fittings, allowing the entire enclosure to be removed from the vehicle quickly when cargo space is required, without tools or cable stripping. High and Low-Level Inputs: Separate RCA (low-level, 150mV-6V) and speaker-level (high-level, 300mV-12V) inputs are provided via a single RCA pair summed L/R, supporting both aftermarket and OEM head unit installations from the same unit. Precision MDF Enclosure with Vinyl Finish: The enclosure is constructed from 5/8" Medium Density Fiberboard, which provides optimal acoustic properties for subwoofer applications. The heat-activated vinyl finish resists marks and wear in daily cargo area use. Thermal and Over/Under Voltage Protection: Onboard protection monitors both operating temperature and supply voltage, shutting the amplifier down safely before damage occurs under fault conditions. CEA-2006 and CEA-2031 Compliant: Amplifier power ratings conform to CEA-2006 industry standards at 14.4V with 1% or less THD. Woofer power handling conforms to CEA-2031, confirming both ratings are real, tested figures. Technical Specs Specification Detail SKU P500-12P Series Punch Woofer Size 12" Woofer Quantity 1 Woofer Series Proprietary Power Handling 500W RMS Integrated Amplifier 500W RMS Amplifier Class Class D Enclosure Type Ported (Slot Port) Enclosure Material 5/8" MDF Enclosure Finish Heat-Activated Vinyl Frequency Response 30 Hz - 200 Hz Low-Pass Crossover Variable 50-200 Hz @ 12 dB/octave Butterworth Bass EQ 0 to +12 dB @ 45 Hz Phase Control 0 to 180 degrees Input Switch High-Level (Speaker) / Low-Level (RCA) Signal Input 1 x RCA Pair (L/R Summed) Input Sensitivity (Low-Level) 150 mV - 6V Input Sensitivity (High-Level) 300 mV - 12V Input Impedance 20k Ohms Auto Turn-On Selector Remote Trigger / DC Offset Sense / Audio Sense Remote Control Punch Level Control (included) Visual Indicators POWER / PROTECT LED Heatsink Type Extruded Aluminium Cooling Convection Power Wire Gauge 8 AWG (B+/GND), 18 AWG (Remote) Power Input Connector Quick Disconnect Fuses 30A total (2 x 15A ATO) Compliance CEA-2006 (amplifier), CEA-2031 (woofer), Klippel Verified Shipping Weight 48.2 lbs (21.9 kg) Warranty 1 Year Goes Well With The P500-12P is designed as a standalone bass solution and requires no separate subwoofer amplifier or enclosure. For vehicles where the factory head unit is retained, the high-level speaker inputs and Audio Sense auto turn-on allow direct connection without any additional interface. For systems running an aftermarket head unit, the RCA input connects directly from the head unit's subwoofer pre-out. To complement the P500-12P with front and rear speaker amplification, the PBR400X4D or R2-300X4 pair naturally using a standard RCA pre-out from the head unit. An 8-gauge power and ground cable run to the battery is required, along with the 30A fuse protection provided by the two included 15A ATO fuses. Frequently Asked Questions Does the P500-12P need a separate amplifier or subwoofer enclosure? No. The P500-12P is a fully self-contained system that includes the 12" proprietary woofer, a 500-watt Class D amplifier, and a precision-tuned vented MDF enclosure in one unit. All that is required for installation is a power and ground connection, an audio input (RCA or speaker level), and optionally a remote turn-on wire depending on the auto turn-on mode selected. Can the P500-12P be connected directly to a factory head unit? Yes. The high-level speaker inputs accept signal from the factory head unit's speaker outputs, and the Audio Sense or DC Offset Sense auto turn-on modes allow the enclosure to power on automatically without a dedicated remote turn-on wire. This makes the P500-12P a direct plug-in upgrade for OEM systems without requiring head unit replacement. What does the quick-release connector system allow? The quick-release input and power connectors allow the entire P500-12P enclosure to be disconnected and removed from the vehicle quickly without tools or cable work. This is particularly useful in hatchbacks and sedans where the boot floor is frequently used for cargo, allowing the subwoofer to be temporarily removed and reinstalled without disturbing the permanent wiring. What is Klippel Verification, and why does it matter for a subwoofer? Klippel is an independent speaker measurement and certification programme that identifies and corrects non-linear distortion parameters in speaker drivers, including suspension non-linearities and motor force variation across the cone's travel range. A Klippel-verified woofer has been measured, characterised, and optimised to minimise distortion at high excursion levels, producing cleaner, more accurate bass output at the power levels the P500-12P is designed to deliver. What are the three auto turn-on modes, and which should I use? Remote Trigger mode powers the amplifier on when a 12V signal is received at the remote input terminal, requiring a remote turn-on wire from the head unit. DC Offset Sense mode detects a DC voltage change on the high-level speaker input to trigger turn-on, suitable for OEM systems where the speaker output changes state when the head unit powers on. Audio Sense mode detects an incoming audio signal on the input and triggers turn-on automatically, making it the most universal option for both OEM and aftermarket installations without a remote output. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-2X10 Prime Dual 10 Inch Sealed Loaded Subwoofer Enclosure A pre-built, pre-wired sealed enclosure loaded with two R2D2-10 10 inch dual voice coil subwoofers handling 500W RMS and 1000W peak, internally wired to a 2-ohm load. Constructed from 5/8 inch MDF with OEM-grade carpet covering and high current binding posts. Just add an amplifier for complete bass performance straight out of the box. Backed by a 1 year warranty. Product Overview The Rockford Fosgate R2-2X10 is a complete sealed loaded subwoofer enclosure from the Prime R2 series, housing two R2D2-10 10 inch dual voice coil subwoofers in a pre-built, pre-wired cabinet ready for drop-in installation. The enclosure is internally wired to present a 2-ohm load at the amplifier terminals, removing the need for any internal wiring work at installation. The enclosure is constructed from 5/8 inch MDF (medium density fiberboard) for rigid, resonance-free cabinet walls, covered with OEM-grade carpet for a factory-quality finish. High current binding posts accept up to 12 AWG speaker wire for a secure, low-resistance connection. Both subwoofers carry CEA-2031 certified power handling and Klippel Verified certification, confirming that the rated performance specifications are accurately measured and reproduced. The R2-2X10 is the more compact alternative to the R2-2X12, offering the same 500W RMS power handling in a smaller footprint suited to vehicles with tighter boot or cargo space constraints. Features & Benefits Pre-Built, Pre-Wired - Drop-In Installation: The R2-2X10 arrives fully assembled and internally wired, presenting a 2-ohm load at the binding posts. No internal enclosure wiring or speaker installation is required. Connect an amplifier and the system is ready to use straight out of the box. Dual R2D2-10 10 Inch Subwoofers - 500W RMS Combined: Two R2D2-10 dual voice coil subwoofers handle a combined 500W RMS and 1000W peak, delivering powerful bass performance in a more compact footprint than the dual 12 inch R2-2X12. Internally Wired to 2-Ohm Load: The enclosure is pre-wired to present a stable 2-ohm load at the amplifier binding posts, simplifying amplifier selection and ensuring optimal power transfer from a compatible 2-ohm stable monoblock or 2-channel amplifier. 5/8 Inch MDF Construction with OEM-Grade Carpet: The enclosure walls are built from 5/8 inch medium density fiberboard for a rigid, resonance-free cabinet, covered in OEM-grade carpet for a clean, factory-quality finish that suits most vehicle interiors. High Current Binding Posts - Up to 12 AWG: The high current binding posts accept speaker cable up to 12 AWG, providing a secure, low-resistance connection between the amplifier and the loaded enclosure. Klippel Verified and CEA-2031 Certified: Both subwoofers carry Klippel Verified certification, confirming that the measured performance specifications are accurately represented. CEA-2031 certified power handling ensures the rated wattage figures reflect real-world performance, not inflated marketing numbers. Technical Specs Specification Detail SKU R2-2X10 Enclosure Type Sealed Woofer Quantity 2 Woofer Size 10 inch Woofer Series R2D2-10 Nominal Impedance (each) 2 Ohm (dual voice coil) Amplifier Load 2 Ohm (internally pre-wired) Power Handling 500W RMS / 1000W Peak Enclosure Material 5/8 inch MDF Enclosure Finish OEM-Grade Carpet Speaker Connector High Current Binding Posts (up to 12 AWG) Dimensions (H x W x D) 310 x 765 x 308mm (12.20 x 30.12 x 12.11 inch) CEA-2031 Compliant Yes Certifications Klippel Verified Shipping Weight 16.5kg Warranty 1 Year Compatible With / Goes Well With The R2-2X10 suits a wide range of vehicle applications where a pre-built dual 10 inch sealed subwoofer enclosure can be accommodated in the boot or cargo area. At 310mm high x 765mm wide x 308mm deep, it is more compact than the R2-2X12 and is well suited to hatchbacks, sedans, and SUVs with tighter cargo space. The enclosure presents a 2-ohm load and is best paired with a monoblock amplifier rated at 500W RMS at 2 ohms, or a bridged 2-channel amplifier with equivalent 2-ohm stable output. Goes Well With: P1000X2 - Rockford Fosgate Prime 1000W 2-channel amplifier, bridgeable to mono for direct pairing with the R2-2X10 at 2 ohms P500X2 - Prime 500W 2-channel amplifier for a matched Prime series system build R2-2X12 - Larger dual 12 inch version of this enclosure for applications with more boot space and a desire for deeper bass extension RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the amplifier installation alongside the R2-2X10 RFK8 - Rockford Fosgate 8 AWG amplifier wiring kit for lower power amplifier pairings Frequently Asked Questions Does the R2-2X10 require any internal wiring or speaker installation? No. The R2-2X10 arrives fully pre-built and pre-wired with both subwoofers already installed and internally connected to a 2-ohm load at the binding posts. All that is required at installation is connecting an external amplifier to the high current binding posts using speaker cable up to 12 AWG. What amplifier do I need for the R2-2X10? The R2-2X10 presents a 2-ohm load and handles 500W RMS combined. For best results, pair it with a monoblock amplifier rated at 500W RMS at 2 ohms, or a 2-channel amplifier that is 2-ohm stable when bridged to mono at equivalent power. Contact us if you need help selecting a compatible amplifier for your system. What is the difference between the R2-2X10 and the R2-2X12? Both enclosures handle 500W RMS and use the same pre-built, pre-wired 2-ohm sealed cabinet design. The key differences are physical size and bass character. The R2-2X10 is more compact at 310 x 765 x 308mm and is better suited to vehicles with limited boot space. The R2-2X12 is larger at 365 x 865 x 450mm and delivers deeper bass extension due to the greater cone area of the 12 inch subwoofers. Choose the R2-2X10 for space-constrained installations, or the R2-2X12 if maximum bass depth is the priority. What are the enclosure dimensions and will it fit my vehicle? The R2-2X10 measures 310mm high x 765mm wide x 308mm deep (12.20 x 30.12 x 12.11 inches). It is recommended to measure your boot or cargo area carefully and compare against these dimensions before purchasing to confirm fitment in your specific vehicle. Why is the enclosure wired to 2 ohms and what amplifier impedance does that require? Each R2D2-10 subwoofer has a dual voice coil configuration. The internal wiring combines both subwoofers to present a single 2-ohm load at the binding posts. This is a common and efficient impedance for monoblock amplifiers to deliver their rated power. Ensure your chosen amplifier is rated as 2-ohm stable to get the full 500W RMS from this enclosure.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1S-1X10P Power 10" 500 Watt Slim Vented Loaded Enclosure Built for truck installs that demand serious output without sacrificing cabin space, the T1S-1X10P pairs a Power T1 slim 10" subwoofer with a precision-tuned vented wedge enclosure rated at 500 watts RMS and configured for maximum current at 1 ohm. Product Overview The T1S-1X10P is Rockford Fosgate's loaded slim vented enclosure from the Power Series, housing the T1S1-10 Power T1 slim 10" subwoofer in a wedge-profile MDF box designed specifically for behind-seat truck installations where depth is limited. Despite the slim-line footprint, the enclosure is vented through a high-flow, low-noise slotted port that is tuned to enhance hard-hitting, boomy bass frequencies rather than the tighter, more controlled output of a sealed design. The 1-ohm nominal impedance configuration allows the T1S1-10 driver to be pushed with serious amplifier power, with 500 watts RMS and 1000 watts peak power handling supported from within a compact wedge profile. The enclosure is constructed from 5/8" MDF and finished in black carpet with black stitched Rockford Fosgate logo detailing. Spring-loaded 12 AWG input terminals provide quick-release connectivity, and a grille is included for driver protection. Klippel verified and CEA-2031 compliant, with a 1-year warranty. Features & Benefits Power T1 Slim Subwoofer with 500W RMS Power Handling: The T1S1-10 Power T1 slim driver is rated at 500 watts RMS and 1000 watts peak, delivering Power Series output capacity from a subwoofer specifically designed for minimum-depth enclosures. Klippel verification confirms the driver's performance parameters have been measured and optimised for accuracy at high excursion levels. Vented Wedge Enclosure Tuned for Hard-Hitting Bass: The slotted port is tuned specifically to enhance hard-hitting, boomy bass frequencies, making the T1S-1X10P the preferred choice for listeners who want maximum impact and low-frequency punch rather than tight, sealed-box accuracy. High-Flow, Low-Noise Slotted Vent: The slotted port design maximises airflow through the enclosure at resonance while minimising port noise and chuffing at high output levels, maintaining clean bass output as amplifier power increases. 1-Ohm Nominal Impedance: The 1-ohm configuration allows the T1S-1X10P to be driven directly from a monoblock amplifier at its lowest stable impedance, maximising available output power from compatible amplifiers and delivering the kind of output associated with a much larger system. Slim-Line Wedge Profile for Truck Behind-Seat Installation: The wedge dimensions of 4.2" x 6.3" depth and 14.5" height allow the T1S-1X10P to fit behind the seats of most trucks without consuming the cab's usable passenger or storage space. 5/8" MDF Construction: The enclosure is constructed from 5/8" Medium Density Fiberboard, providing structural rigidity and acoustic mass suited to vented subwoofer enclosure requirements. 12 AWG Spring-Loaded Input Terminals: The spring-loaded terminal design accepts wire up to 12 AWG and provides a quick-release connection for easy installation or removal without tools. Black Carpet Finish with Stitched Logo: The premium black carpet finish with black-stitched Rockford Fosgate logo detailing provides a clean, finished appearance suited to in-cabin truck installations. Grille Included: A grille is included in the box for full driver protection after installation. CEA-2031 Compliant: Woofer power handling conforms to CEA-2031 industry standards, confirming the 500W RMS rating is a real, tested figure. Technical Specs Specification Detail SKU T1S-1X10P Series Power Woofer Size 10" Woofer Quantity 1 Woofer Series Power T1S (T1S1-10) Power Handling (RMS) 500W Power Handling (Peak) 1000W Nominal Impedance 1 Ohm Frequency Response 20 Hz - 200 Hz Enclosure Type Vented (Shallow Wedge) Enclosure Material 5/8" MDF Enclosure Finish Black Carpet with Black Stitching Speaker Connector Spring-loaded, up to 12 AWG Grille Included Dimensions (H x W x D1 x D2) 14.5" x 31.5" x 4.2" x 6.3" (37.0 cm x 80.0 cm x 10.7 cm x 15.9 cm) Shipping Weight 36 lbs (16.3 kg) Compliance CEA-2031, Klippel Verified Warranty 1 Year Goes Well With The T1S-1X10P operates at 1 ohm and handles 500 watts RMS, requiring a monoblock amplifier that is stable at 1 ohm with sufficient output to drive it effectively. Rockford Fosgate's R2-1200X1 is a well-matched amplifier option, delivering substantial power at 1 ohm from within the Prime Series range. A 4-gauge amplifier wiring kit is required for the power and ground run, and a quality RCA interconnect from the head unit's subwoofer pre-out is the recommended signal source connection. For truck installations requiring front and rear speaker amplification alongside the T1S-1X10P, a separate 4-channel amplifier such as the R2-300X4 or R2-200X2 connected via the monoblock's RCA pass-through is the recommended approach. Frequently Asked Questions Is the T1S-1X10P a sealed or vented enclosure, and how does that affect the bass character? The T1S-1X10P is a vented enclosure, using a high-flow slotted port tuned to enhance hard-hitting, boomy low-frequency output. This makes it the preferred choice for listeners who want maximum impact and low-frequency punch. For tighter, more controlled bass with greater transient accuracy, a sealed enclosure would be the alternative. Rockford Fosgate's P300-10T is an example of a sealed powered truck enclosure if a different bass character is preferred. What amplifier is required, and what impedance does the T1S-1X10P present? The T1S-1X10P is configured at 1-ohm nominal impedance, requiring a monoblock amplifier that is rated stable at 1 ohm. Confirm the amplifier's 1-ohm stability rating before purchase, as not all monoblock amplifiers support 1-ohm operation. At 500 watts RMS power handling, the amplifier should be capable of delivering at least 500 watts at 1 ohm for the driver to reach its rated output. Does the T1S-1X10P include a grille and all hardware needed for installation? Yes. The T1S-1X10P includes a grille for driver protection and spring-loaded 12 AWG input terminals are built into the enclosure. An amplifier, amplifier wiring kit, and RCA interconnect are required separately for a complete installation. Will the T1S-1X10P fit behind the seat of my truck? The T1S-1X10P measures 14.5" high, 31.5" wide, and has a wedge depth ranging from 4.2" to 6.3". These dimensions are designed for common truck behind-seat applications, but clearance varies by vehicle. Measure the available space behind the seat in your specific truck before purchase to confirm the enclosure will fit without obstructing the seat's range of movement. What does Klippel verification mean for the T1S1-10 driver? Klippel is an independent speaker measurement and certification programme that identifies and corrects non-linear distortion parameters in speaker drivers, including suspension non-linearities and motor force variation across the cone's travel range. Klippel verification on the T1S1-10 driver confirms that its performance parameters have been accurately measured and optimised, ensuring the driver delivers clean, low-distortion output at the high excursion levels produced at 500 watts RMS. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P3-1X12 Punch Single P3 12" Vented Loaded Enclosure Genuine P3 Bass, Ready to Drop In Product Overview The Rockford Fosgate P3-1X12 is a single 12" vented loaded enclosure housing a genuine Punch P3 subwoofer (P3D2-12), rated at 600 Watts RMS and 1200 Watts peak. Internally pre-wired to a 1-ohm load, it is built to be paired with a compatible high-output mono amplifier delivering the same P3 tonal performance as a custom driver-and-box build in a factory-tuned, ready-to-install package. The P3-1X12 is the single-driver counterpart to the dual 12" P3-2X12, offering the same vented enclosure design, proprietary high-flow low-noise port, and computer-aided design tuning at half the driver count and a more manageable 25.8 kg shipping weight. Constructed from 5/8" MDF with high-density carpet and high-current 10 AWG compression binding posts, the P3-1X12 suits Australian vehicles where a single high-output 12" vented enclosure delivers the right balance of bass impact and boot space efficiency. Key Specifications Subwoofer: Single 12" Rockford Fosgate Punch P3 (P3D2-12) Woofer quantity: 1 Power handling: 600W RMS / 1200W peak Pre-wired impedance: 1 ohm (internally wired) Enclosure type: Vented Construction: 5/8" MDF Finish: High-density carpet Port: Proprietary high-flow, low-noise Input terminals: Up to 10 AWG high-current compression binding posts Dimensions (H x W x D): 38.4 x 48.6 x 40.0 cm Shipping weight: 25.8 kg CEA-2031 compliant Features & Benefits Single 12" Punch P3 driver (P3D2-12): The same genuine P3D2-12 woofer available as a standalone driver, factory-loaded and tuned in a single vented enclosure. Identical P3 tonal performance to a custom build without the cost and time of sourcing components separately. 600W RMS / 1200W peak power handling: Built for serious amplifier output. Pre-wired to 1 ohm, the P3-1X12 is ready to handle the full output of a compatible high-power mono amplifier, delivering impactful bass performance suited to larger vehicle boot spaces in Australian sedans, SUVs, and utes. Vented enclosure for high-output bass: The vented design produces higher output at the tuning frequency than a sealed enclosure, delivering the loud, impactful bass response preferred for high-output single 12" systems where maximum volume and low-frequency extension are the priority. Proprietary high-flow, low-noise port: Purpose-engineered for this specific enclosure to minimise air turbulence and port chuffing at high excursion levels. Maintains clean, articulate bass output at or near rated power a clear advantage over budget vented enclosures at sustained high-volume use. Computer-aided design tuning: Enclosure volume and port dimensions are calculated specifically for the P3D2-12 driver, ensuring the vented alignment is optimised for maximum output and accuracy at the intended tuning frequency. Pre-wired to 1 ohm: Factory internal wiring presents a 1-ohm load to the amplifier. Maximises power delivery from compatible 1-ohm stable mono amplifiers with no internal wiring configuration required. More manageable than the P3-2X12: At 25.8 kg and 38.4 x 48.6 x 40.0 cm, the P3-1X12 is significantly lighter and narrower than the dual 12" P3-2X12 (40.66 kg, 86.0 cm wide), making it a practical choice for vehicles where dual 12" width or weight is a constraint. CEA-2031 compliant: Power handling figures comply with the CEA-2031 standard for loaded subwoofer enclosures, providing a verified and comparable specification. 5/8" MDF construction: Rigid enclosure walls minimise panel flex, resonance, and vibration at sustained 600W RMS input levels essential for accurate, tight bass reproduction at the output levels this enclosure is designed to handle. High-density carpet finish: Durable, professional appearance suited to daily boot and cargo area use in Australian vehicles. High-current 10 AWG compression binding posts: Appropriate for the current demands of a 600W RMS, 1-ohm system. Secure, reliable connections at the wattage and current levels this enclosure operates at. Technical Specs Specification Detail SKU P3-1X12 Brand Rockford Fosgate Subwoofer Driver 12" Rockford Fosgate Punch P3 (P3D2-12) Woofer Quantity 1 Power Handling 600W RMS / 1200W peak Pre-Wired Impedance 1 ohm (internally wired) Enclosure Type Vented Port Type Proprietary high-flow, low-noise Construction Material 5/8" MDF Finish High-density carpet Input Terminals Up to 10 AWG high-current compression binding posts Enclosure Design Computer-aided design tuned CEA-2031 Compliant Yes Dimensions (H x W x D) 38.4 x 48.6 x 40.0 cm Shipping Weight 25.8 kg Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 1 ohm, rated at or near 600W RMS Rockford Fosgate Power and Punch series high-output mono amplifiers Sedans, SUVs, wagons, and utes with boot or cargo area space suitable for a 38.4 x 48.6 x 40.0 cm enclosure Vehicles where the dual 12" P3-2X12 width or weight is impractical but single 12" P3 performance is the target Rockford Fosgate wiring kits rated for high-current 1-ohm mono amplifier installation Rockford Fosgate RCA cables and signal accessories Frequently Asked Questions What amplifier does the P3-1X12 require? The P3-1X12 is pre-wired to 1 ohm and handles 600W RMS. A mono amplifier stable at 1 ohm and rated at or near 600W RMS is recommended such as a compatible Rockford Fosgate Power or Punch mono amplifier. Do not exceed 1200W peak input. What is the difference between the P3-1X12 and P3-2X12? The P3-1X12 houses a single P3D2-12 driver rated at 600W RMS in a narrower enclosure (48.6 cm wide, 25.8 kg), while the P3-2X12 houses dual P3D4-12 drivers rated at 1200W RMS in a wider enclosure (86.0 cm wide, 40.66 kg). Choose the P3-1X12 when single 12" output is sufficient or dual 12" width and weight is impractical. Are the drivers in the P3-1X12 the same as the standalone P3 subwoofers? Yes. The P3-1X12 is loaded with a genuine Rockford Fosgate P3D2-12 driver the same woofer available separately in the Punch P3 range factory-loaded and tuned in a computer-optimised vented enclosure. Why choose the P3-1X12 vented enclosure over a sealed P3 enclosure? A vented enclosure produces higher output at the tuning frequency than a sealed enclosure, making it the preferred choice for maximum bass impact and volume. A sealed P3 enclosure offers tighter, more accurate bass at lower output levels. Choose vented for maximum impact; choose sealed for accuracy and control. Is the P3-1X12 suitable for daily boot use in an Australian vehicle? Yes, provided your vehicle has sufficient boot space (38.4 x 48.6 x 40.0 cm minimum clearance) and your electrical system supports a high-output 1-ohm mono amplifier. The 25.8 kg weight is manageable for a single-person install but care should be taken when lifting and positioning. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P2-1X12 Punch Single P2 12" Vented Loaded Enclosure Genuine Punch Bass, Single Driver Simplicity Product Overview The Rockford Fosgate P2-1X12 is a single 12" vented loaded enclosure housing a genuine Punch P2 subwoofer, rated at 400 Watts RMS and internally pre-wired to a 1-ohm load. Designed for the most straightforward path to quality Punch P2 bass performance, it pairs with a compatible mono amplifier to deliver the impactful, high-output bass the vented P2 enclosure range is built for no enclosure building, no driver sourcing, and no tuning required. Positioned as the single-driver counterpart to the dual 12" P2-2X12, the P2-1X12 suits Australian vehicles where a single high-output 12" vented enclosure provides the right balance of bass impact and boot space efficiency. The same genuine P2 woofer available separately in the Punch range is factory-loaded here in a computer-aided design tuned vented enclosure with a proprietary high-flow, low-noise port, 5/8" MDF construction, high-density carpet finish, and high-current compression binding posts ready to install straight out of the box. Key Specifications Subwoofer: Single 12" Rockford Fosgate Punch P2 Power handling: 400W RMS Pre-wired impedance: 1 ohm (internally wired) Enclosure type: Vented Construction: 5/8" MDF Finish: High-density carpet Port: Proprietary high-flow, low-noise Input terminals: High-current compression binding posts Enclosure design: Computer-aided design tuned Dimensions: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Single 12" Punch P2 driver: The same genuine Punch P2 woofer available as a standalone driver, factory-loaded and tuned in a single vented enclosure. Identical P2 tonal performance to a custom build without the time and cost of sourcing and assembling components separately. 400W RMS power handling: Pre-wired to 1 ohm for maximum power delivery from a compatible mono amplifier. More power capacity than a P1 single 12" setup, and a practical choice for Australian vehicles running a competent mid-range mono amplifier. Vented enclosure for high-output bass: The vented design produces higher output at the tuning frequency than a sealed enclosure, delivering the loud, impactful bass response preferred for single 12" high-output systems in larger vehicle boot spaces. Proprietary high-flow, low-noise port: Purpose-engineered for this specific enclosure to minimise air turbulence and port chuffing at high excursion levels. Maintains clean, articulate bass output at sustained high-volume use a clear quality advantage over budget vented enclosures. Computer-aided design tuning: Enclosure volume and port dimensions are calculated specifically for the P2 12" driver, ensuring the vented alignment is optimised for maximum output and accuracy at the intended tuning frequency. Pre-wired to 1 ohm: Factory internal wiring presents a 1-ohm load to the amplifier. No internal wiring configuration required connect your amplifier to the binding posts and go. More accessible than the P2-2X12: The P2-1X12 delivers single 12" P2 performance in a more compact and lighter footprint than the dual 12" P2-2X12 (35.08 kg, 86.0 cm wide) the right choice when dual 12" width or weight is impractical for the available boot space. Positioned above P1 in the Punch loaded range: The P2-1X12 delivers more power handling than a P1 single 12" loaded enclosure while sharing the same driver quality and enclosure construction standards across the Punch loaded range. 5/8" MDF construction: Rigid enclosure walls minimise panel flex, resonance, and vibration at sustained 400W RMS input essential for accurate, tight bass at the output levels this enclosure is designed to handle. High-density carpet finish: Durable, professional appearance suited to daily boot and cargo area use in Australian vehicles. High-current compression binding posts: Secure, reliable connections appropriate for the current demands of a 400W RMS, 1-ohm system. Technical Specs Specification Detail SKU P2-1X12 Brand Rockford Fosgate Subwoofer Driver 12" Rockford Fosgate Punch P2 Woofer Quantity 1 Power Handling 400W RMS Pre-Wired Impedance 1 ohm (internally wired) Enclosure Type Vented Port Type Proprietary high-flow, low-noise Construction Material 5/8" MDF Finish High-density carpet Input Terminals High-current compression binding posts Enclosure Design Computer-aided design tuned Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Mono amplifiers stable at 1 ohm, rated at or near 400W RMS for optimal performance Rockford Fosgate Power and Punch series mono amplifiers Sedans, SUVs, wagons, and utes with boot or cargo area space available for a single 12" vented enclosure Vehicles where dual 12" P2-2X12 width or weight is impractical but single 12" P2 output is the target Rockford Fosgate wiring kits rated for high-current 1-ohm mono amplifier installation Rockford Fosgate RCA cables and signal accessories Frequently Asked Questions What amplifier does the P2-1X12 require? The P2-1X12 is pre-wired to 1 ohm and handles 400W RMS. A mono amplifier stable at 1 ohm and rated at or near 400W RMS is recommended such as a compatible Rockford Fosgate Power or Punch mono amplifier. What is the difference between the P2-1X12 and P2-2X12? The P2-1X12 houses a single P2 12" driver rated at 400W RMS in a more compact single-driver enclosure, while the P2-2X12 houses dual P2D4-12 drivers rated at 800W RMS combined in a wider enclosure (86.0 cm, 35.08 kg). Choose the P2-1X12 when single 12" output is sufficient or the dual 12" footprint is too large for your boot space. How does the P2-1X12 compare to the P1 single 12" loaded enclosure? The P2-1X12 uses a higher-pedigree Punch P2 driver with more power handling capacity than the P1 single 12" loaded enclosure, while sharing the same vented enclosure construction and computer-aided design tuning standards. Choose the P2-1X12 when more power handling and P2-level tonal performance is the priority. Are the drivers in the P2-1X12 the same as the standalone P2 subwoofers? Yes. The P2-1X12 is loaded with a genuine Rockford Fosgate Punch P2 driver the same woofer available separately in the Punch P2 range factory-loaded and tuned in a computer-optimised vented enclosure. Why choose a vented enclosure over a sealed enclosure for this application? A vented enclosure produces higher output at the tuning frequency than a sealed enclosure of equivalent driver and amplifier power, making it the preferred choice for maximum bass impact and volume. A sealed enclosure offers tighter, more accurate bass at lower output levels choose vented for impact, sealed for accuracy and control. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P300-12T Punch 12" 300 Watt Powered Truck Enclosure When your truck cab needs serious bass without sacrificing every centimetre of under-seat space, the P300-12T packs a high-output 12" woofer and 300-watt Class D amplifier into a slim sealed enclosure purpose-built for truck installations. Product Overview The P300-12T is Rockford Fosgate's all-in-one powered subwoofer enclosure designed specifically for the dimensional constraints of truck under-seat and behind-seat installations. The slim wedge profile enclosure is precision constructed from 5/8" MDF and houses a 12" proprietary woofer impedance-optimised for the integrated 300-watt Class D amplifier in a closed-loop design, ensuring the driver and amplifier work together as a matched system from the factory. The sealed enclosure delivers tight, accurate bass with a 35-200 Hz frequency response, well suited to the acoustic environment of a truck cabin. Control is handled via an onboard variable Low-Pass crossover (50-200 Hz), a Bass EQ with 0 to +12 dB of onboard boost, and a 0-180 degree phase switch on the amplifier plate, while the included Punch Level Control remote puts bass adjustment in the driver's hand. An intelligent auto turn-on/off circuit with three selectable modes (Remote Trigger, DC Offset Sense, and Audio Sense) eliminates the need for a dedicated remote turn-on wire in OEM installations. Separate RCA and high-level speaker inputs make it compatible with both aftermarket and factory head units. Quick-release input connections allow the enclosure to be disconnected and removed quickly when the cargo area is needed. The heat-activated vinyl finish resists marks and wear in daily use. CEA-2006 (amplifier) and CEA-2031 (woofer) compliant, Klippel verified, with a 1-year warranty. Features & Benefits 300-Watt Class D Amplifier with Closed-Loop Design: The integrated amplifier is an impedance-matched, closed-loop Class D design tuned specifically for the P300-12T's proprietary 12" woofer, ensuring maximum efficiency and precise driver control at all output levels from within the slim enclosure footprint. Slim Wedge Enclosure for Truck Applications: The low-profile wedge enclosure is dimensioned to fit under or behind seats in truck applications where vertical clearance is limited, delivering full-size 12" subwoofer performance without occupying the cab's usable space. Klippel Verified Woofer: The 12" proprietary woofer has been verified through the Klippel certification programme, which measures and corrects non-linear distortion parameters to deliver the best possible transient accuracy and low-frequency output from an optimised, impedance-matched driver. Sealed Enclosure for Tight, Accurate Bass: The sealed MDF enclosure delivers a controlled, accurate bass response suited to the enclosed acoustic space of a truck cab, with tighter low-frequency transients than a ported design and a frequency response extending down to 35 Hz. Intelligent Auto Turn-On/Off: Three selectable turn-on modes (Remote Trigger, DC Offset Sense, and Audio Sense) allow the P300-12T to power on automatically in any installation scenario, including factory head units without a dedicated remote output, eliminating additional wiring complexity. Variable Low-Pass Crossover: Continuously variable from 50 to 200 Hz at 12 dB/octave Butterworth, the onboard crossover integrates cleanly with full-range speakers across virtually any crossover point set by the main system amplifier or head unit. Onboard Bass EQ: 0 to +12 dB of onboard bass boost corrects for acoustic deficiencies in the vehicle interior and adds presence to the low-frequency output without an external equaliser. Phase Switch: A 0 to 180 degree phase control allows the subwoofer to be time-aligned with the main speakers acoustically, compensating for physical placement differences in the truck cab for a coherent, integrated bass response. Included Punch Level Control Remote: The Punch Level Control is included in the box, allowing bass output to be adjusted from the driver's seat in real time without accessing the amplifier plate directly. Quick-Release Input Connections: Input connections use quick-disconnect fittings, allowing the enclosure to be removed from the vehicle quickly when cargo space is needed, without tools or cable work. High and Low-Level Inputs: Separate RCA (low-level, 150mV-6V) and speaker-level (high-level, 300mV-12V) inputs via a single RCA pair summed L/R support both aftermarket and OEM head unit installations from the same unit. Thermal and Over/Under Voltage Protection: Onboard protection monitors both operating temperature and supply voltage, shutting the amplifier down safely before damage occurs under fault conditions. Precision MDF Enclosure with Vinyl Finish: Constructed from 5/8" Medium Density Fiberboard for optimal acoustic properties, covered with a heat-activated vinyl finish that resists marks and scuffs in daily truck use. CEA-2006 and CEA-2031 Compliant: Amplifier power ratings conform to CEA-2006 industry standards at 14.4V with 1% or less THD. Woofer power handling conforms to CEA-2031, confirming both ratings are real, tested figures. Technical Specs Specification Detail SKU P300-12T Series Punch Woofer Size 12" Woofer Quantity 1 Woofer Series Proprietary Power Handling 300W RMS Integrated Amplifier 300W RMS Amplifier Class Class D Enclosure Type Sealed Enclosure Material 5/8" MDF Enclosure Finish Heat-Activated Vinyl Frequency Response 35 Hz - 200 Hz Low-Pass Crossover Variable 50-200 Hz @ 12 dB/octave Butterworth Bass EQ 0 to +12 dB (frequency centre not specified in source data) Phase Control 0 to 180 degrees Input Switch High-Level (Speaker) / Low-Level (RCA) Signal Input 1 x RCA Pair (L/R Summed) Input Sensitivity (Low-Level) 150 mV - 6V Input Sensitivity (High-Level) 300 mV - 12V Input Impedance 20k Ohms Auto Turn-On Selector Remote Trigger / DC Offset Sense / Audio Sense Remote Control Punch Level Control (included) Visual Indicators POWER / PROTECT LED Heatsink Type Extruded Aluminium Cooling Convection Power Wire Gauge 8 AWG (B+/GND), 18 AWG (Remote) Power Input Connector Quick Disconnect Fuses 20A total (2 x 10A ATO) Compliance CEA-2006 (amplifier), CEA-2031 (woofer), Klippel Verified Dimensions (H x W x D1 x D2) 15" x 25.8" x 4.8" x 8.5" (380 mm x 656 mm x 122 mm x 215 mm) Shipping Weight 32 lbs (14.5 kg) Warranty 1 Year Bass EQ frequency flag: The source data confirms the Bass EQ range as 0 to +12 dB but does not specify a centre frequency. The P500-12P lists this as 45 Hz. Please verify with the supplier whether the P300-12T shares the same 45 Hz centre before publishing. Goes Well With The P300-12T is designed as a standalone bass solution and requires no separate subwoofer amplifier or enclosure. For factory head unit installations, the high-level speaker inputs and Audio Sense auto turn-on allow direct connection without additional interface hardware. For aftermarket head unit installations, the RCA input connects directly from the head unit's subwoofer pre-out. To complement the P300-12T with front and rear speaker amplification, the PBR400X4D or R2-300X4 pair naturally via a standard RCA pre-out from the head unit. An 8-gauge power and ground cable run to the battery is required, along with the 2 x 10A ATO fuses included in the box. Frequently Asked Questions Is the P300-12T designed specifically for trucks, and will it fit other vehicles? The P300-12T is purpose-built for truck applications, with a slim wedge profile that fits under or behind seats in truck cabs where clearance is limited. It can physically fit in other vehicles, but Rockford Fosgate's intended application is trucks. For hatchbacks, sedans, and SUVs requiring a larger powered enclosure with a ported design, the P500-12P is the recommended alternative. Why is a sealed enclosure used in the P300-12T rather than a ported design? The sealed enclosure is chosen for the truck application because it provides tighter, more controlled bass response suited to the enclosed acoustic environment of a truck cab, and allows the slim wedge profile to be maintained within tight dimensional constraints. A sealed design also offers more forgiving power handling characteristics and gentler roll-off below the tuning frequency compared to a ported enclosure. Can the P300-12T be connected directly to a factory head unit? Yes. The high-level speaker inputs accept signal from the factory head unit's speaker outputs directly, and the Audio Sense or DC Offset Sense auto turn-on modes allow the enclosure to power on without a dedicated remote turn-on wire. This makes the P300-12T a direct plug-in upgrade for OEM truck systems without requiring head unit replacement. What are the three auto turn-on modes, and which should I use? Remote Trigger mode powers the amplifier on when a 12V signal is received at the remote input terminal, requiring a remote turn-on wire from the head unit. DC Offset Sense mode detects a DC voltage change on the high-level speaker input to trigger turn-on, suitable for OEM systems where the speaker output changes state when the head unit powers on. Audio Sense mode detects an incoming audio signal on the input and triggers turn-on automatically, making it the most universal option for both OEM and aftermarket installations without a dedicated remote output. What is Klippel Verification, and why does it matter for a powered enclosure? Klippel is an independent speaker measurement and certification programme that identifies and corrects non-linear distortion parameters in speaker drivers, including suspension non-linearities and motor force variation across the cone's travel range. In a sealed powered enclosure where the driver and amplifier are a matched system, Klippel verification confirms that the woofer's performance envelope has been accurately measured and optimised to deliver clean, low-distortion bass at the rated 300 watts across its operating range.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Best-Selling Removable, Waterproof and High-Powered Subwoofer Legendary Products & Support From Authorized Dealers When you choose Infinity, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Infinity dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Infinity's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Infinity dealer today!

Read more less