Roadvision BR601ARR LED Jumbo Combination Lamp Twin Stop Tail Ind A triple module LED jumbo combination lamp from the Roadvision BR601 Series, the BR601ARR combines twin stop/tail modules and an indicator with an integrated reflector, 10-30V DC multi-volt input, sealed polycarbonate lenses on a high impact ABS housing, a 100,000 hour rated LED lifespan, ADR/ECE approval for all functions, and a 5-year warranty. Product Overview The Roadvision BR601ARR is a heavy duty all-in-one rear lighting solution for trucks and trailers, running double stop/tail modules alongside the indicator in a single 604 x 132 x 41mm jumbo lamp for extra rear-facing presence. With 48 stop/tail LEDs and 24 indicator LEDs, it produces more light output than incandescent lamps while drawing a fraction of the current, at just 0.1A for the indicator and 0.1/0.05A for stop/tail at 13.8V. The unbreakable sealed polycarbonate lenses and extremely tough high impact ABS housing are dust and water proof and totally maintenance free, with a 100,000 hour rated LED lifespan from solid-state technology. The simple surface mount design retro-fits in place of existing jumbo lamps on 501mm and 325mm mounting hole centres, and the lamp is supplied pre-wired with a 300mm LEDLink connector. All functions are ADR/ECE approved. With Roadvision it's fit and forget. Features & Benefits Twin Stop/Tail Modules for Extra Visibility: The BR601ARR runs two stop/tail modules with 48 LEDs in total alongside the indicator module, boosting rear-facing brake and tail presence on heavy vehicles. All-In-One Heavy Duty Combination Lamp: Stop/tail, indicator, and reflector functions are combined in one triple module jumbo lamp, replacing multiple separate lamps on the rear of trucks and trailers. Retro-Fits Existing Jumbo Lamps: The simple surface mount design retro-fits in place of existing jumbo combination lamps, making it a straightforward LED upgrade for heavy vehicles. More Light, Less Current: The BR601 Series produces more light output than conventional incandescent systems while drawing a fraction of the current at 13.8V. 100,000 Hour Rated LED Lifespan: Solid-state LED technology delivers a 100,000 hour rated lifespan for totally maintenance-free operation over the life of the vehicle. Unbreakable Polycarbonate Lenses and High Impact ABS Housing: The sealed polycarbonate lenses and extremely tough high impact ABS housing are dust and water proof, built for heavy duty road exposure. Multi-Volt 10-30V DC Input: The 10-30V DC multi-volt input makes the BR601ARR compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. ADR/ECE Approved for All Functions: The indicator, stop, and tail functions are all ADR/ECE approved for legal on-road use in Australia. Pre-Wired with LEDLink Connector: The lamp is supplied pre-wired with a 300mm LEDLink connector for a quick, tidy connection to the vehicle harness. 5-Year Warranty: The BR601ARR is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR601ARR Brand Roadvision Series BR601 Combination Description Rect Stop/Tail(x2)/Ind Lamp Triple Module Functions Stop/Tail (x2), Indicator and Reflector Voltage Input 10-30V DC Number of LEDs Indicator - 24 LEDs, Stop/Tail - 48 LEDs Current Draw Indicator - 0.1A, Stop/Tail - 0.1/0.05A at 13.8V Dimensions 604 x 132 x 41mm Lens Polycarbonate Housing ABS High Impact Ingress Protection Water and Dust Proof Mounting Type Surface Mount Mounting Hole Centres 501mm and 325mm Cable 300mm with LEDLink Connector ADR Approval Indicator - CRN 46082, Stop - CRN 46121, Tail - CRN 46120 CTA Approval CTA-060775 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR601ARR is compatible with 10-30V DC electrical systems, covering both 12V and 24V trucks and trailers, and is ADR/ECE approved for all functions for on-road use in Australia. The surface mount design retro-fits in place of existing jumbo lamps. The BR601 Series is also available as a twin module stop/tail/indicator (BR601AR) and a triple module with reverse (BR601ARW). Confirm the 604mm lamp length and 501mm/325mm mounting hole centres fit your intended location before purchase. Frequently Asked Questions What functions does the BR601ARR include? The BR601ARR combines twin stop/tail modules with 48 LEDs, a 24 LED indicator module, and an integrated reflector in a single triple module jumbo lamp. Why does the BR601ARR have two stop/tail modules? The double stop/tail configuration doubles the brake and tail LED count to 48 for extra rear-facing visibility on heavy vehicles, in place of the reverse module found on the BR601ARW. Is the BR601ARR ADR approved? Yes. All functions are ADR/ECE approved, with indicator CRN 46082, stop CRN 46121, tail CRN 46120, and CTA approval CTA-060775. Is the BR601ARR compatible with 24V trucks? Yes. The BR601ARR operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. Can the BR601ARR replace my existing jumbo lamp? Yes. The simple surface mount design retro-fits in place of existing jumbo combination lamps, with 501mm and 325mm mounting hole centres. Confirm your existing mounting positions before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RHL101000 Professional Multi-Function 1000lm LED Inspection Lamp and Torch A professional multi-function rechargeable LED inspection lamp and torch from Roadvision, the RHL101000 delivers up to 1000 lumens from a 10W COB LED inspection lamp with high, mid, and low output modes, plus a 200 lumen 4W SMD LED torch, featuring a 180-degree tilt magnetic base, 2 rear and 1 bottom magnets, 2 swivel hooks, IP65 rating, 2m drop resistance, Micro-C USB charging, and powerbank output, backed by a 3.7V 3350mAh Li-ion battery. Product Overview The Roadvision RHL101000 is a professional multi-function LED torch and inspection lamp suited for home, travel, and work applications. The 10W COB LED inspection lamp delivers three output modes: high (1000lm), mid (500lm), and low (250lm), with run times of 2 hours on high, 4.5 hours on mid, and 8 hours on low. The separate 4W SMD LED torch delivers 200 lumens with an 8-hour run time. The 3.7V 3350mAh rechargeable Li-ion battery charges via Micro-C USB in 4.5 hours. A USB Type-A powerbank output at 5V/2A is available for charging other devices. The 180-degree tilt magnetic base, 2 rear magnets, and 1 bottom magnet allow hands-free positioning on ferrous metal surfaces in a wide range of orientations. Two swivel hooks provide additional hands-free hanging options. Soft touch rubberised casing provides a secure grip. A 3-LED battery level indicator monitors charge status. IP65 rated for dust and water resistance and 2m drop resistant for durability on worksites and in the field. Dimensions are 260 x 53 x 39mm and weight is 382g. Features & Benefits 1000 Lumen COB LED Inspection Lamp with 3 Output Modes: The 10W COB LED inspection lamp delivers high (1000lm), mid (500lm), and low (250lm) output modes, with corresponding run times of 2 hours on high, 4.5 hours on mid, and 8 hours on low for flexible power and runtime management across different work scenarios. 200 Lumen 4W SMD LED Torch: The integrated 4W SMD LED torch delivers 200 lumens with an 8-hour run time for a focused spot beam suited to torch applications alongside the broad COB inspection lamp output. 180-Degree Tilt Magnetic Base: The 180-degree tilt magnetic base allows the inspection lamp to be positioned across a wide range of angles on any ferrous metal surface, providing flexible hands-free positioning for under-bonnet, on-vehicle, and worksite applications. 2 Rear Magnets, 1 Bottom Magnet, and 2 Swivel Hooks: The combination of 3 magnets across the rear and bottom of the unit and 2 swivel hooks provides a wide range of hands-free mounting options across ferrous metal surfaces and fixed structures. Powerbank Output - USB Type-A 5V/2A: The USB Type-A powerbank output allows the RHL101000 to charge smartphones and other USB devices from its Li-ion battery, adding utility in remote and field environments. 3.7V 3350mAh Rechargeable Li-Ion Battery: The 3350mAh Li-ion battery provides sufficient capacity for extended use across multiple modes, with Micro-C USB charging in 4.5 hours from any compatible USB power source. Micro-C USB Charging: Charges via Micro-C USB from vehicle USB ports, wall adaptors, and power banks for convenient charging in the field. IP65 Rated and 2m Drop Resistant: IP65 rating provides full dust protection and resistance to water jets from any direction. The 2m drop rating confirms the RHL101000 can withstand accidental drops to hard surfaces during worksite and field use. 3-LED Battery Level Indicator: The 3-LED battery indicator provides a clear visual indication of remaining charge level to prevent unexpected battery depletion during use. Soft Touch Rubberised Casing: The soft touch rubberised casing provides a secure non-slip grip and adds additional impact protection to the external housing. Super White Light Close to Daylight: Both the COB inspection lamp and SMD torch LED produce super-white light close to daylight colour temperature for accurate colour rendering during inspection and work tasks. Technical Specs Specification Detail SKU RHL101000 Brand Roadvision Series RHL101000 Beam Type Handheld Inspection Lamp and Torch Inspection Lamp 10W COB LED Torch 4W SMD LED Lumen Output - Inspection Lamp High 1000lm Lumen Output - Inspection Lamp Mid 500lm Lumen Output - Inspection Lamp Low 250lm Lumen Output - Torch 200lm Battery 3.7V 3350mAh Li-ion Run Time - Torch 8 Hours Run Time - Inspection Lamp Low 8 Hours Run Time - Inspection Lamp Mid 4.5 Hours Run Time - Inspection Lamp High 2 Hours Charger Micro-C USB Charging Time 4.5 Hours Powerbank Output USB Type-A 5V/2A IP Rating IP65 Shock Resistance 2m Drop Rated Magnets 2 x Rear, 1 x Bottom Hooks 2 x Swivel Base 180-Degree Tilt Magnetic Battery Indicator 3-LED Casing Soft Touch Rubberised Dimensions 260mm x 53mm x 39mm Weight 382g Compatible With The RHL101000 charges via Micro-C USB from any compatible USB power source including vehicle USB ports, wall adaptors, and power banks. The USB Type-A powerbank output is compatible with smartphones and other USB devices requiring 5V/2A input. The magnetic base and rear magnets attach to ferrous metal surfaces. The swivel hooks are compatible with standard hook mounting points on tool shelves, vehicle hooks, and worksite structures. Frequently Asked Questions How long does the RHL101000 battery last? Run time depends on the selected mode: torch delivers 8 hours, inspection lamp low delivers 8 hours, inspection lamp mid delivers 4.5 hours, and inspection lamp high delivers 2 hours. The 3-LED battery indicator monitors remaining charge during use. Can the RHL101000 be used as a powerbank to charge other devices? Yes. The RHL101000 includes a USB Type-A powerbank output at 5V/2A, allowing it to charge smartphones and other USB devices from its Li-ion battery. Is the RHL101000 waterproof? The RHL101000 is IP65 rated, providing full protection against dust ingress and water jets from any direction. It is not rated for submersion. What drop height is the RHL101000 rated for? The RHL101000 is 2m drop rated, confirming it can withstand accidental drops to hard surfaces from up to 2 metres during worksite and field use. How does the magnetic base work on the RHL101000? The 180-degree tilt magnetic base attaches to ferrous metal surfaces across a wide range of orientations, allowing the inspection lamp to be aimed in the required direction without manual support. Two additional rear magnets and one bottom magnet provide further attachment points. Two swivel hooks provide hanging options on non-magnetic surfaces.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RBL4021SC Stealth S40 Series 21" LED Light Bar 94W Projector Combo Beam A 21" 94W projector combo beam LED light bar from the Roadvision Stealth S40 Series, the RBL4021SC delivers 5975 lumens with a beam distance of 1275 metres at 0.5 lux and 638 metres at 1 lux, powered by 21 x 3W Osram LEDs, featuring a smoked lens, blackout mounting hardware, Thermal Management Technology, IP68 and IP69K protection, 9-position adjustable anti-vibration end mounts, low-profile slide mounts, and a 7-year warranty. Product Overview The Roadvision RBL4021SC is a 21" single row LED light bar from the Stealth S40 Series. Twenty-one 3W Osram LEDs produce 94W in a projector combo beam combining 6 driving and 15 spot projectors, delivering 5975 lumens with 4065 lux at 10 metres, 638 metres at 1 lux, and 1275 metres at 0.5 lux. The smoked lens and blackout mounting hardware provide a low-profile stealth appearance. IP68 and IP69K dual protection. Multi-volt 10-30V DC at 6.6-9.2A at 13.8V. 2-pin Deutsch plug. 9-position adjustable anti-vibration end mount system and low-profile slide mounts. 50,000 hour LED lifespan. Backed by a 7-year warranty. Features & Benefits 5975 Lumens - 1275 Metres at 0.5 Lux: Delivers 5975lm with 4065 lux at 10 metres, 638m at 1 lux, and 1275m at 0.5 lux for outstanding long-range highway beam performance from a 21" bar. Projector Combo Beam - 6 Driving and 15 Spot Projectors: Combines 6 driving and 15 spot projectors for long-range penetration suited to highway driving. 21 x 3W Osram LEDs - 94W Super White Output: Twenty-one 3W Osram LEDs for strong output performance. Super Compact S40 Profile at 40mm Deep: The shallowest profile in the Stealth range, suited to licence plate, roof rack, and tight mounting positions. Smoked Lens and Blackout Mounting Hardware: Low-profile stealth appearance. Roadvision Thermal Management Technology: Consistent output and reliability. IP68 and IP69K Dual Protection: Full ingress protection. Die-Cast Aluminium Housing with Polycarbonate Lens: Tough, lightweight construction. 50,000 Hour LED Lifespan: Maintenance-free reliability. Multi-Volt 10-30V DC with Electronic Protection: 12V and 24V compatible. 2-Pin Deutsch Plug: Secure, weatherproof connection. 7-Year Warranty: Backed by a 7-year Roadvision Platinum Range warranty. Technical Specs Specification Detail SKU RBL4021SC Brand Roadvision Series Stealth S40 Description S40 Series 21" LED Light Bar Beam Type Projector Combo (6 Driving / 15 Spot) Maximum Lumens 5975lm Maximum Lux at 10m 4065lx Beam Distance at 1 Lux 638m Beam Distance at 0.5 Lux 1275m Maximum Watts 94W LED Quantity 21 x 3W Osram Current Draw 6.6-9.2A at 13.8V Input Voltage 10-30V DC Bar Length 21" (522mm) Dimensions 522mm x 55mm x 40mm Wiring 2-Pin Deutsch Plug IP Rating IP68 and IP69K LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Mounts 9-Position Anti-Vibration End Mount and Slide Mounts Warranty 7 Years Compatible With The RBL4021SC is compatible with 10-30V DC vehicle electrical systems. Suited to licence plate, roof rack, and tight mounting positions. The S40 Series is available in 13" (RBL4013SC), 32" (RBL4032SC), 40" (RBL4040SC), and 50" (RBL4050SC) lengths. Frequently Asked Questions Is the RBL4021SC compatible with 24V vehicles? Yes. The RBL4021SC operates across 10-30V DC. What connector does the RBL4021SC use? 2-pin Deutsch plug. What is the IP rating of the RBL4021SC? IP68 and IP69K. How does the 21" S40 compare to the 21" S52 and S70? The RBL4021SC (S40, 21") uses 21 x 3W LEDs at 94W with 5975lm and 638m at 1 lux in the shallowest 40mm deep profile. The S52 21" uses 15 x 10W LEDs at 127W. The S70 21" uses 40 x 3W LEDs at 176W. The S40 is the best choice for tight mounting positions prioritising profile depth over maximum output. What mounting is included? The 9-position adjustable anti-vibration end mount system and low-profile slide mounts.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR82ARW LED Triple Combination Lamp Stop Tail Indicator and Reverse An ADR-approved compact LED triple combination lamp from the Roadvision BR82 Series, the BR82ARW features stop, tail, indicator, and reverse functions with polycarbonate lens, high-impact ABS housing, 10-30V DC multi-volt input, 120mm stud centre mounting, and a 300mm tinned copper pre-wired cable with LEDLink connector, backed by a 5-year warranty. Product Overview The Roadvision BR82ARW is a compact LED triple combination lamp from the BR82 Series, providing stop, tail, indicator, and reverse functions in a single 282 x 95 x 30mm surface mount unit. Twelve indicator LEDs, 12 stop/tail LEDs, and 12 reverse LEDs deliver more light output than equivalent incandescent lamps while drawing a fraction of the current. Current draw at 13.8V is 0.1A for indicator, 0.1A/0.05A for stop/tail, and 0.1A for reverse. High-impact ABS housing with sealed polycarbonate lens. 120mm stud centre mounting. Pre-wired with a 300mm tinned copper sheathed cable with LEDLink connector with earth (white), stop (red), tail (brown), indicator (green or yellow), and reverse (black) wires. ADR approved with individual CRN numbers for indicator (CRN 49821), stop (CRN 49823), tail (CRN 49824), and reverse (CRN 49822) functions. CTA approval CTA-060786. Backed by a 5-year warranty. Features & Benefits Compact All-in-One Stop, Tail, Indicator, and Reverse Combination Lamp: The BR82ARW combines stop, tail, indicator, and reverse functions in a single compact 282 x 95 x 30mm rectangle unit, providing a complete rear combination lamp solution including reverse in a single assembly. ADR Approved for All Functions: Individual ADR approval CRN numbers for indicator (CRN 49821), stop (CRN 49823), tail (CRN 49824), and reverse (CRN 49822) functions, and CTA approval CTA-060786, confirming compliance with Australian road safety requirements for all lamp functions. 12 LEDs Per Function - Indicator, Stop/Tail, and Reverse: Dedicated 12 LED arrays per function produce more light output than equivalent incandescent lamps while drawing significantly less current. High-Impact ABS Housing with Sealed Polycarbonate Lens: Durable high-impact ABS housing with weatherproof sealed polycarbonate lens for long-term reliability. 100,000 Hour LED Lifespan - Fit and Forget: The 100,000 hour rated LED lifespan eliminates bulb replacements. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. LEDLink Connector for Simple Wiring: The 300mm tinned copper sheathed cable with LEDLink connector provides reliable pre-wired connection to LEDLink trailer wiring systems. 120mm Stud Centre Surface Mount: Surface mount design with 120mm stud centres for straightforward installation. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR82ARW Brand Roadvision Series BR82 Description Rectangle Triple Combination - Stop/Tail, Indicator and Reverse Functions Stop, Tail, Indicator, Reverse LED Quantity - Indicator 12 LEDs LED Quantity - Stop/Tail 12 LEDs LED Quantity - Reverse 12 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.1A at 13.8V Current Draw - Stop 0.1A at 13.8V Current Draw - Tail 0.05A at 13.8V Current Draw - Reverse 0.1A at 13.8V Lens Construction Polycarbonate Housing Construction High-Impact ABS Dimensions 282mm x 95mm x 30mm Mounting Hole Centre 120mm Stud Centres Cable Length 300mm Tinned Copper Sheathed Connector LEDLink Wiring Earth - White, Stop - Red, Tail - Brown, Indicator - Green or Yellow, Reverse - Black ADR Approval - Indicator CRN 49821 ADR Approval - Stop CRN 49823 ADR Approval - Tail CRN 49824 ADR Approval - Reverse CRN 49822 CTA Approval CTA-060786 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR82ARW is compatible with 10-30V DC trailer and vehicle electrical systems. The LEDLink connector is compatible with standard LEDLink trailer wiring systems. ADR and CTA approved for on-road use including reverse. Confirm mounting dimensions and wiring compatibility for your specific application before purchase. A stop/tail/indicator version without reverse is available as the BR82ARR. Frequently Asked Questions Is the BR82ARW ADR approved for on-road use? Yes. The BR82ARW holds individual ADR approval CRN numbers for indicator (CRN 49821), stop (CRN 49823), tail (CRN 49824), and reverse (CRN 49822) functions, and CTA approval CTA-060786. What is the difference between the BR82ARW and the BR82ARR? The BR82ARW adds a reverse function with 12 dedicated reverse LEDs and a black reverse wire to the stop, tail, and indicator functions of the BR82ARR. Both share the same dimensions, housing, connector, and multi-volt input. Choose the BR82ARW where an integrated reverse lamp is required. Is the BR82ARW compatible with 24V systems? Yes. The BR82ARW operates across 10-30V DC, compatible with both 12V and 24V systems. What wires are included on the BR82ARW? Earth (white), stop (red), tail (brown), indicator (green or yellow), and reverse (black) wires on a 300mm tinned copper sheathed LEDLink cable. What is the LED lifespan of the BR82ARW? 100,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RBLW3220C SRE Essentials 22in LED Light Bar Combo Beam A 22 inch single row LED bar light from the Roadvision Essentials SRE Series, the RBLW3220C produces up to 8400 lumens from 20 x 5W Osram LEDs through a combination beam reaching 523 metres at 1 lux, with Thermal Management Technology, 11-32V DC multi-volt input, IP68 rating, die-cast aluminium housing, polycarbonate lens, and a 3-year warranty. Product Overview The Roadvision RBLW3220C is the 22 inch model in the Essentials SRE Series, the ideal choice for those chasing value for money without compromising on quality. Twenty high performing 5W Osram LEDs produce up to 8400 lumens of instant super white light close to daylight, with the perfect combination of spot and driving optics producing a combination style beam pattern rated at 3738 lux at 10 metres, 523 metres at 1 lux, and a maximum beam distance of 740 metres at 0.5 lux. Equipped with Thermal Management Technology and packaged in an IP68 rated lightweight, tough die-cast aluminium housing shielded behind a polycarbonate lens, the RBLW3220C is built to endure the toughest conditions. The 601 x 63 x 62mm bar mounts via low profile slide and end mounts, and the multi-volt 11-32V DC input draws 6.0 to 7.2 amps at 13.8V with a 50,000 hour LED lifespan from solid-state technology. Installation is a simple 2-wire connection via the 2-pin Deutsch plug, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. Features & Benefits 22 Inch Combination Beam - Up to 8400 Lumens: The RBLW3220C produces up to 8400 lumens through a combination beam rated at 3738 lux at 10 metres and reaching 523 metres at 1 lux, balancing long distance punch with spread for the track ahead. 20 x 5W Osram LEDs: Twenty high performing 5W Osram LEDs produce super white light close to daylight, improving visibility and reducing eye strain during night driving. Genuine Value Without Compromise: The Essentials SRE Series is Roadvision's entry level bar light range, delivering quality Osram componentry, Thermal Management Technology, and an IP68 rating at a value price point. Thermal Management Technology: Built-in Thermal Management Technology protects the bar and maintains light performance in demanding operating conditions. IP68 Water and Dust Proof: The IP68 rating provides protection against water and dust for reliable performance in the toughest conditions. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight, tough die-cast aluminium housing and polycarbonate lens stand up to corrugations, stone strikes, and harsh off-road use. Multi-Volt 11-32V DC Input: The 11-32V DC multi-volt input makes the RBLW3220C compatible with both 12V and 24V vehicle electrical systems, drawing 6.0 to 7.2 amps at 13.8V. 50,000 Hour LED Lifespan: Solid-state technology delivers a 50,000 hour LED lifespan for maintenance-free performance over the life of the vehicle. Low Profile Slide and End Mounts: Low profile slide and end mounts provide flexible, secure fitment to bull bars, roof racks, and brackets while keeping the installation tidy. Simple 2-Wire Installation with Deutsch Plug: The 2-pin Deutsch plug and simple 2-wire installation make for a quick, professional connection, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. 3-Year Warranty: The RBLW3220C is backed by a 3-year Roadvision warranty. Technical Specs Specification Detail SKU RBLW3220C Brand Roadvision Series Essentials SRE Description SRE Series 22" Bar 20 LED Beam Pattern Combination Maximum Lumens 8400lm Maximum Lux at 10m 3738lx Maximum Beam Distance at 1 Lux 523m Maximum Beam Distance at 0.5 Lux 740m Maximum Watts 100W Light Source 20 x 5W Osram LEDs Input Voltage 11-32V DC Current Draw 6.0-7.2A at 13.8V Lens Polycarbonate Housing Die-Cast Aluminium IP Rating IP68 Mounting Low Profile Slide and End Mounts Wiring 2 Pin Deutsch Plug Dimensions 601 x 63 x 62mm LED Lifespan 50,000 Hours Warranty 3 Years Compatible With The RBLW3220C is compatible with 11-32V DC vehicle electrical systems, covering both 12V and 24V vehicles. The Essentials SRE Series is also available in 12 inch (RBLW3120C, 4200 lumens) and 32 inch (RBLW3320C, 12600 lumens) models. Roadvision's standard wiring harnesses and RBHDWK heavy duty bar light wiring kits are the recommended accessories. Confirm the 601mm bar length and mounting positions fit your bull bar, roof rack, or brackets before purchase. Frequently Asked Questions How far does the RBLW3220C project light? The RBLW3220C reaches 523 metres at 1 lux and a maximum of 740 metres at 0.5 lux, producing up to 8400 lumens and 3738 lux at 10 metres through its combination beam. What makes the SRE Series an entry level range? The Essentials SRE Series is priced as Roadvision's value bar light range while keeping quality 5W Osram LEDs, Thermal Management Technology, an IP68 rated die-cast aluminium housing, and a polycarbonate lens. Is the RBLW3220C compatible with 24V vehicles? Yes. The RBLW3220C operates across 11-32V DC, making it compatible with both 12V and 24V vehicle electrical systems. How does the RBLW3220C mount and connect? The bar mounts via low profile slide and end mounts and connects with a simple 2-wire installation through the 2-pin Deutsch plug, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. Roadvision's standard wiring harnesses are the recommended accessory. What other sizes are available in the SRE Series? The SRE Series is available in 12 inch (RBLW3120C, 4200 lumens, 50W), this 22 inch (RBLW3220C, 8400 lumens, 100W), and 32 inch (RBLW3320C, 12600 lumens, 150W) models, all with the same combination beam and IP68 construction.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL814FHS LED Work Light 14W Flood Handle and Switch A feature packed 14W LED work lamp from the Roadvision RWL814FH Series, the RWL814FHS combines an integrated handle, switch, and DT connector with 9 x 1.5W Osram LEDs producing 1210 effective lumens through a flood beam, fully adjustable mounting, 10-30V DC multi-volt input, IP67 rating, die-cast aluminium housing, polycarbonate lens, and a 5-year warranty. Product Overview The Roadvision RWL814FHS is one of the most versatile lamps in the Roadvision range, packaging high performing 1.5W Osram LEDs behind a polycarbonate lens in an IP67 rated housing with an integrated handle, switch, and DT connector. Fully adjustable, it allows you to take full control of where and when you need the light, with the on-lamp switch meaning the light can be operated directly without a separate dash switch. Nine 1.5W Osram LEDs produce 1210 effective lumens of super white light close to daylight, spread across a flood beam rated at 35 lux at 10 metres, 59 metres at 1 lux, and a 118 metre beam distance at 0.25 lux. The 100 x 57 x 185mm upright body pairs a lightweight, tough die-cast aluminium housing with a polycarbonate lens, water and dust proof to IP67 for worry-free operation in even the toughest conditions. The multi-volt 10-30V DC input draws a super low 1.2 amps at 13.8V, and solid-state technology delivers a 50,000 hour LED lifespan. Installation is a simple 2-wire connection via the integrated 2-pin Deutsch plug, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. Features & Benefits Integrated Handle, Switch and DT Connector: The built-in carry handle, on-lamp switch, and DT connector make the RWL814FHS a grab-and-go work light that can be operated directly at the lamp without wiring in a separate switch. Fully Adjustable Mounting: The fully adjustable design lets you take full control of where and when you need the light, angling the beam exactly where the job requires. 14W Flood Beam - 1210 Effective Lumens: The RWL814FHS produces 1210 effective lumens of instant light, rated at 35 lux at 10 metres, 59 metres at 1 lux, and a 118 metre beam distance at 0.25 lux. 9 x 1.5W Osram LEDs: Nine 1.5W Osram LEDs produce super white light close to daylight, improving visibility and reducing eye strain during night work compared to warmer light sources. 50,000 Hour LED Lifespan: Solid-state technology delivers a 50,000 hour LED lifespan for maintenance-free performance over the long service life typical of work vehicle, camping, and machinery applications. IP67 Water and Dust Proof: The RWL814FHS is water and dust proof to IP67, allowing worry-free operation in wet, muddy, and dusty conditions. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight, tough die-cast aluminium housing and polycarbonate lens provide reliability in even the toughest conditions. Multi-Volt 10-30V DC with Super Low Current Draw: The 10-30V DC multi-volt input draws just 1.2 amps at 13.8V, making the RWL814FHS compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. Simple 2-Wire Installation with Integrated Deutsch Plug: The integrated 2-pin Deutsch plug and simple 2-wire installation make for a quick, professional connection, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. 5-Year Warranty: The RWL814FHS is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL814FHS Brand Roadvision Series RWL814FH Description 8 Series LED Work Lamp 14W Flood with Switch and Handle Beam Type Flood Beam Lumens Light Output (Effective) 1210lm Total Watts 14W Light Source 9 x 1.5W Osram LEDs Input Voltage 10-30V DC Current Draw 1.2A at 13.8V DC Lux at 10m 35 Lux Metres at 1 Lux 59m Metres at 0.25 Lux 118m Beam Distance 118m Switch Integrated On-Lamp Switch Handle Integrated Handle Lens Polycarbonate Housing Die-Cast Aluminium IP Rating IP67 Wiring 2 Pin Deutsch Plug Dimensions 100 x 57 x 185mm LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL814FHS is compatible with 10-30V DC vehicle electrical systems, covering both 12V and 24V vehicles. The RWL814FH Series is also available as the RWL814FHR, the horizontal rectangle version with the same 14W output and integrated handle and switch. Confirm mounting space and wiring access before purchase. Frequently Asked Questions Does the RWL814FHS have its own switch? Yes. The RWL814FHS has an integrated on-lamp switch, so the light can be turned on and off directly at the lamp without wiring in a separate dash switch. How bright is the RWL814FHS? The RWL814FHS produces 1210 effective lumens from 9 x 1.5W Osram LEDs, rated at 35 lux at 10 metres, 59 metres at 1 lux, and a 118 metre beam distance at 0.25 lux through a flood beam. Is the RWL814FHS compatible with 24V vehicles? Yes. The RWL814FHS operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. Is the RWL814FHS waterproof? Yes. The RWL814FHS is water and dust proof to IP67, with a die-cast aluminium housing and polycarbonate lens built for worry-free operation in tough conditions. What is the difference between the RWL814FHS and RWL814FHR? Both share the same 14W output, 9 x 1.5W Osram LEDs, integrated handle and switch, and 2-pin Deutsch plug. The RWL814FHS is the upright version at 100 x 57 x 185mm producing 1210 lumens, while the RWL814FHR is the horizontal rectangle version at 187 x 63 x 107mm producing 1250 lumens.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR80ARW LED Rectangle Triple Module Lamp Stop Tail Indicator Reverse and Reflector An ADR-approved LED rectangle triple module combination lamp from the Roadvision BR80 Series, the BR80ARW features stop, tail, indicator, reverse, and integrated reflector functions with polycarbonate lens and housing, IP67 protection, 10-30V DC multi-volt input, 241mm mounting hole centre, and a 300mm LEDLink connector pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR80ARW is a rectangle triple module combination lamp from the BR80 Series, providing stop, tail, indicator, reverse, and integrated reflector functions in a single 288 x 107 x 29mm surface mount unit. Sixteen indicator LEDs, 16 stop/tail LEDs, and 16 reverse LEDs deliver high-output performance with low current draw. Current draw at 13.8V is 0.2A for indicator, 0.2A/0.05A for stop/tail, and 0.3A for reverse. Polycarbonate lens and housing are IP67 waterproof and dustproof with a 100,000 hour rated LED lifespan. Integrated reflector in the housing. 241mm mounting hole centre surface mount. Pre-wired with a 300mm LEDLink connector cable. ADR approved with individual CRN numbers for indicator (CRN 46114), stop (CRN 46112), tail (CRN 46113), reverse (CRN 46115), and reflector (CRN 46075) functions. Backed by a 5-year warranty. Features & Benefits Stop, Tail, Indicator, Reverse, and Integrated Reflector Functions: The BR80ARW combines all five functions in a single compact triple module unit, providing a complete rear combination lamp solution including reverse. ADR Approved for All Functions: Individual ADR approval CRN numbers for indicator (CRN 46114), stop (CRN 46112), tail (CRN 46113), reverse (CRN 46115), and reflector (CRN 46075), confirming compliance with Australian road safety requirements for all lamp functions. 16 LEDs Per Function - Indicator, Stop/Tail, and Reverse: High LED counts per function deliver superior brightness compared to equivalent incandescent lamps with significantly lower current draw. Integrated Retro Reflector: The retro reflector is integrated into the housing, providing passive rear visibility without requiring a separate reflector assembly. Polycarbonate Lens and Housing - IP67 Rated: Sealed polycarbonate construction on both lens and housing provides IP67 waterproof and dustproof protection for all exterior trailer and vehicle mounting locations. 100,000 Hour LED Lifespan - Fit and Forget: Maintenance-free solid-state technology with a 100,000 hour rated lifespan eliminates bulb replacements. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. LEDLink Connector Pre-Wired Cable: The 300mm LEDLink connector cable provides reliable, corrosion-resistant pre-wired connection to LEDLink trailer wiring systems. 241mm Mounting Hole Centre Surface Mount: Simple surface mount installation for horizontal or vertical mounting surfaces. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR80ARW Brand Roadvision Series BR80 Description Rect Stop/Tail/Ind/Rev/Ref Lamp Triple Module Functions Stop, Tail, Indicator, Reverse, Reflector LED Quantity - Indicator 16 LEDs LED Quantity - Stop/Tail 16 LEDs LED Quantity - Reverse 16 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.2A at 13.8V Current Draw - Stop 0.2A at 13.8V Current Draw - Tail 0.05A at 13.8V Current Draw - Reverse 0.3A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 288mm x 107mm x 29mm Mounting Type Surface Mount Mounting Hole Centre 241mm Cable Length 300mm LEDLink Connector IP Rating IP67 ADR Approval - Indicator CRN 46114 ADR Approval - Stop CRN 46112 ADR Approval - Tail CRN 46113 ADR Approval - Reverse CRN 46115 ADR Approval - Reflector CRN 46075 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR80ARW is compatible with 10-30V DC trailer and vehicle electrical systems. The LEDLink connector is compatible with standard LEDLink trailer wiring systems. ADR approved for all functions including reverse. Confirm mounting dimensions and wiring compatibility for your specific application before purchase. A stop/tail/indicator/reflector version without reverse is available as the BR80ARR. Frequently Asked Questions Is the BR80ARW ADR approved for on-road use? Yes. The BR80ARW holds individual ADR approval CRN numbers for indicator (CRN 46114), stop (CRN 46112), tail (CRN 46113), reverse (CRN 46115), and reflector (CRN 46075) functions. What is the difference between the BR80ARW and the BR80ARR? The BR80ARW adds a reverse function with 16 dedicated reverse LEDs to the stop, tail, indicator, and reflector functions of the BR80ARR. Both share the same dimensions, polycarbonate housing, IP67 rating, and LEDLink connector. Choose the BR80ARW where an integrated reverse lamp is required. Is the BR80ARW compatible with 24V systems? Yes. The BR80ARW operates across 10-30V DC, compatible with both 12V and 24V systems. What wires does the BR80ARW include? The wiring colour codes are not specified in the source data. Confirm wiring colour codes with your supplier before purchase. What is the LED lifespan of the BR80ARW? 100,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL7429C Sidewinder LED Work Light 29W Combo Beam A square 29W combo beam LED work lamp from the Roadvision Sidewinder RWL7 Series, the RWL7429C combines 4 x 5W Osram P8 spot LEDs with 6 side angled 1.6W Osram Sidewinder LEDs for a 115-degree spread beam, producing 2100 effective lumens rated at 490 lux at 10 metres, with 10-30V DC multi-volt input, IP67 rating, die-cast aluminium housing, polycarbonate lens, 2-pin Deutsch plug wiring, and a 5-year warranty. Product Overview The Roadvision RWL7429C is a Sidewinder combo LED work lamp offering uncompromised spot and spread performance from a single lamp. Four 5W Osram P8 long range spot LEDs are paired with six unique side angled 1.6W Osram Sidewinder LEDs delivering a 115-degree spread beam, resulting in the perfect combination of spot and flood without the need to install two separate lamps. The combo beam produces 2100 effective lumens rated at a punchy 490 lux at 10 metres from a compact 97 x 73 x 89mm square body. Water and dust proof to IP67, the RWL7429C features a super durable, lightweight die-cast aluminium housing and polycarbonate lens, allowing for worry-free operation in even the toughest conditions. The multi-volt 10-30V DC input draws a super low 1.88 amps at 13.8V, and solid-state technology delivers a 50,000 hour LED lifespan. Installation is a simple 2-wire connection via the 2-pin Deutsch plug, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. Features & Benefits Spot and Flood from One Lamp: The Sidewinder design pairs long range spot LEDs with side angled flood LEDs, delivering the perfect combination of spot and spread without installing two separate lamps. 4 x 5W Osram P8 Spot LEDs: Four high output 5W Osram P8 LEDs provide the long range spot element of the combo beam, rated at a punchy 490 lux at 10 metres. 6 Side Angled Sidewinder LEDs - 115-Degree Spread: Six unique side angled 1.6W Osram LEDs deliver a 115-degree spread beam, filling the periphery around the spot for complete work area coverage. 2100 Effective Lumens of Instant Light: The RWL7429C produces 2100 effective lumens of instant light output, the stronger performer of the two compact Sidewinder models. 50,000 Hour LED Lifespan: Solid-state technology delivers a 50,000 hour LED lifespan for maintenance-free performance over the long service life typical of 4WD, work vehicle, and machinery applications. IP67 Water and Dust Proof: The RWL7429C is water and dust proof to IP67, allowing worry-free operation in wet, muddy, and dusty conditions. Die-Cast Aluminium Housing with Polycarbonate Lens: The super durable, lightweight die-cast aluminium housing and polycarbonate lens provide reliability in even the toughest conditions. Multi-Volt 10-30V DC with Super Low Current Draw: The 10-30V DC multi-volt input draws just 1.88 amps at 13.8V, making the RWL7429C compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. Simple 2-Wire Installation with Deutsch Plug: The 2-pin Deutsch plug and simple 2-wire installation make for a quick, professional connection, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. 5-Year Warranty: The RWL7429C is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL7429C Brand Roadvision Series Sidewinder RWL7 Description Sidewinder Work Lamp LED 29W Square Beam Type Combo Beam (Spot with 115° Spread) Lumens Light Output (Effective) 2100lm Power 29W Light Source 4 x 5W Osram P8 Spot LEDs plus 6 x 1.6W Osram Side Angled LEDs Lux at 10m 490 Lux Input Voltage 10-30V DC Current Draw 1.88A at 13.8V DC Lens Polycarbonate Housing Die-Cast Aluminium IP Rating IP67 Wiring 2 Pin Deutsch Plug Dimensions 97 x 73 x 89mm LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL7429C is compatible with 10-30V DC vehicle electrical systems, covering both 12V and 24V vehicles. The Sidewinder RWL7 Series is also available as the 24W RWL7924C with 9 x 1.6W Osram spot LEDs, and the 55W RWL7955C with 9 x 5W Osram LEDs and Thermal Management Technology. Confirm mounting space and wiring access before purchase. Frequently Asked Questions What makes the Sidewinder design different from a standard work light? The RWL7429C pairs 4 long range spot LEDs with 6 unique side angled LEDs delivering a 115-degree spread beam, giving spot and flood performance from a single lamp without installing two separate lights. How bright is the RWL7429C? The RWL7429C produces 2100 effective lumens of instant light output, rated at 490 lux at 10 metres through its combo beam. Is the RWL7429C compatible with 24V vehicles? Yes. The RWL7429C operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. Is the RWL7429C waterproof? Yes. The RWL7429C is water and dust proof to IP67, with a die-cast aluminium housing and polycarbonate lens built for worry-free operation in tough conditions. What is the difference between the RWL7429C and RWL7924C? Both share the same 97 x 73 x 89mm body and 6 side angled Sidewinder LEDs. The RWL7429C runs 4 x 5W Osram P8 spot LEDs at 29W producing 2100 lumens and 490 lux at 10 metres for more long range punch, while the RWL7924C runs 9 x 1.6W Osram spot LEDs at 24W producing 1500 lumens and 122 lux at 10 metres.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RB130MYR LED Beacon Amber Simulated Rotating Magnetic Mount 10-36V A compact 360-degree high-intensity amber LED beacon from the Roadvision RB130 Series, the RB130MYR features 30 SMD LEDs producing 10W in a simulated rotating pattern at 180rpm, polycarbonate lens and housing, 10-36V DC multi-volt input, and magnetic mount with a 3-metre curly cord and cigarette plug for temporary and portable warning light applications, backed by a 5-year warranty. Product Overview The Roadvision RB130MYR is a magnetic mount LED beacon from the RB130 Series with a simulated rotating flash pattern at 180rpm, sharing the same LED array, housing construction, and electrical specifications as the fixed mount RB130YR but with a magnetic base and 3m curly cord with cigarette plug for quick-deploy temporary and portable applications. Thirty SMD LEDs produce 10W of high-intensity amber 360-degree illumination in a chaser sequence at 180rpm, creating the visual illusion of an internally rotating light source. High-impact polycarbonate lens and housing. Multi-volt 10-36V DC at 0.7A at 13.8V. Backed by a 5-year warranty. Features & Benefits Compact 360-Degree High-Intensity Amber LED Beacon: The RB130MYR delivers 360-degree high-intensity amber output from a compact 117.3 x 130mm body. 30 SMD LEDs - 10W Output - Simulated Rotating at 180rpm: Thirty SMD LEDs in a chaser pattern at 180rpm create the classic rotating beacon visual appearance using solid-state LED technology. Magnetic Mount for Temporary and Portable Applications: The strong magnetic base allows the RB130MYR to be quickly mounted to and removed from any ferrous metal vehicle roof or panel surface without tools, making it ideal for temporary warning light applications, hire fleets, and multi-vehicle deployment. 3-Metre Curly Cord with Cigarette Plug: The 3m curly cord with cigarette plug allows direct connection to a vehicle cigarette lighter socket for fast deployment without permanent wiring, with the extended 3m length providing reach from the cigarette socket to the roof or rear mounting position. Multi-Volt 10-36V DC with Low Current Draw: Compatible with 12V, 24V, and 36V electrical systems at 0.7A at 13.8V. High-Impact Polycarbonate Lens and Housing: Tough polycarbonate construction provides long-term durability, vibration-proof construction, and weatherproof protection. 100,000 Hour LED Lifespan - Fit and Forget: Maintenance-free solid-state technology. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RB130MYR Brand Roadvision Series RB130 Description Beacon LED 10-36V Simulated Rotating Amber Magnetic Mount Function Simulated Rotating Light Source 30 SMD LEDs Power Output 10W Flash/Rotation Rate 180rpm Input Voltage 10-36V DC Current Draw 0.7A at 13.8V Dimensions 117.3mm x 130mm Mounting Type Magnetic Mount Wiring 3m Curly Cord with Cigarette Plug Lens Construction Polycarbonate Housing Construction Polycarbonate LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The RB130MYR is compatible with 10-36V DC vehicle and equipment electrical systems. The 3m curly cord with cigarette plug allows direct connection to a vehicle cigarette lighter socket. A fixed mount simulated rotating version is available as the RB130YR. A fixed mount quad strobe version is available as the RB130Y. Frequently Asked Questions What is the advantage of the magnetic mount on the RB130MYR? The magnetic base allows the RB130MYR to be quickly mounted to and removed from any ferrous metal vehicle roof or panel surface without tools, making it ideal for temporary warning light applications, hire fleets, and situations where the beacon needs to be transferred between vehicles. How long is the curly cord on the RB130MYR? The RB130MYR is supplied with a 3-metre curly cord with cigarette plug, providing sufficient reach from the vehicle cigarette lighter socket to a roof or rear mounting position. Is the RB130MYR compatible with 24V and 36V vehicles? Yes. The RB130MYR operates across 10-36V DC, compatible with 12V, 24V, and 36V electrical systems. What is the difference between the RB130MYR and the RB130YR? Both share identical LED configuration, flash pattern, housing, and electrical specifications. The RB130YR uses a 3-hole fixed mount with 350mm pre-wired cable for permanent installation. The RB130MYR uses a magnetic mount with a 3m curly cord and cigarette plug for temporary or portable applications. Is the RB130MYR weatherproof? Yes. The polycarbonate lens and housing provide vibration-proof and weatherproof sealed protection.v

Read more less

Roadvision BR280ARW LED Combination Lamp Stop Tail Sequential Indicator Reverse Fog and Reflector An ADR-approved LED rectangle combination lamp from the Roadvision BR280 Series, the BR280ARW features stop, tail, sequential indicator, reverse, fog, and integrated reflector functions with polycarbonate lens and housing, 10-30V DC multi-volt input, surface or twin bolt mount, and a 500mm sheathed pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR280ARW is a rear combination lamp from the BR280 Series, providing the most complete rear lamp function set in the BR280 range: stop, tail, sequential indicator, reverse, fog, and integrated retro reflector in a single 283 x 100 x 29mm surface mount unit. The progressive sequential indicator flashes in a sweeping sequence for enhanced visibility and road safety. Polycarbonate lens and housing are IP67 waterproof and dustproof with a 100,000 hour rated LED lifespan. LED count covers indicator (24 LEDs), stop/tail (14 LEDs), reverse (12 LEDs), and fog (14 LEDs) functions. Current draw at 13.8V is 0.2A for indicator, 0.2A/0.05A for stop/tail, 0.2A for reverse, and 0.3A for fog. Surface mount with 116mm mounting hole centre, or twin rear stud mount for horizontal and vertical mounting surfaces. Pre-wired with a 500mm sheathed cable. ADR and ECE approved with individual approval numbers for each function. CTA approval CTA-060819. Backed by a 5-year warranty. Features & Benefits Sequential Indicator for Enhanced Safety: The progressive sequential indicator flashes in a sweeping sequence rather than a standard simultaneous flash, providing increased visibility and a modern, distinctive appearance that enhances road safety. Complete 5-Function Combination Lamp: The BR280ARW combines stop, tail, sequential indicator, reverse, fog, and integrated reflector functions in a single compact unit, providing a complete rear lamp solution without requiring multiple separate lamp assemblies. ADR and ECE Approved for All Functions: Individual ECE approval numbers for indicator (2a-E9-01 16532), stop/tail (R1-S1-E9-02 16532), reverse (AR-E9-00 16532), fog (F1-E9-00 16532), and reflector (IB-E9-02 16532), plus CTA approval CTA-060819, confirming compliance with Australian and international road safety requirements for all lamp functions. Integrated Retro Reflector: The retro reflector is integrated directly into the lens, providing passive rear visibility without requiring a separate reflector unit. Polycarbonate Lens and Housing - IP67 Rated: Sealed polycarbonate construction on both lens and housing provides IP67 waterproof and dustproof protection for all exterior trailer and vehicle mounting locations. Multi-Fit Surface or Twin Bolt Mount: The BR280ARW can be installed via simple surface mount with a 116mm mounting hole centre, or via twin rear stud bolt mount for horizontal or vertical mounting surfaces, providing flexibility for different trailer and vehicle rear panel configurations. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. 100,000 Hour LED Lifespan - Fit and Forget: The 100,000 hour rated LED lifespan with maintenance-free solid-state technology provides long-term reliability with no bulb replacements required. 500mm Sheathed Pre-Wired Cable: The 500mm sheathed pre-wired cable provides a protected and reliable connection to the trailer or vehicle wiring harness. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR280ARW Brand Roadvision Series BR280 Description Rectangle Stop/Tail/Ref Sequential Indicator Combination Functions Stop, Tail, Sequential Indicator, Reverse, Fog, Reflector LED Quantity - Indicator 24 LEDs LED Quantity - Stop/Tail 14 LEDs LED Quantity - Reverse 12 LEDs LED Quantity - Fog 14 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.2A at 13.8V Current Draw - Stop 0.2A at 13.8V Current Draw - Tail 0.05A at 13.8V Current Draw - Reverse 0.2A at 13.8V Current Draw - Fog 0.3A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 283mm x 100mm x 29mm Mounting Type Surface Mount or Twin Bolt Mount Mounting Hole Centre 116mm Cable Length 500mm Sheathed IP Rating IP67 ECE Indicator Approval 2a-E9-01 16532 ECE Stop/Tail Approval R1-S1-E9-02 16532 ECE Reverse Approval AR-E9-00 16532 ECE Fog Approval F1-E9-00 16532 ECE Reflector Approval IB-E9-02 16532 CTA Approval CTA-060819 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR280ARW is compatible with 10-30V DC trailer and vehicle electrical systems. ADR and ECE approved for all functions. Mounts via surface mount (116mm mounting hole centre) or twin rear stud bolt mount for horizontal or vertical mounting surfaces. Confirm wiring requirements for all five active functions before purchase. Frequently Asked Questions Is the BR280ARW ADR approved for on-road use? Yes. The BR280ARW holds individual ECE approval numbers for indicator, stop/tail, reverse, fog, and reflector functions, and CTA approval CTA-060819, confirming compliance with Australian and international road safety requirements. What is a sequential indicator and why is it beneficial? A sequential indicator activates its LEDs in a progressive sweeping sequence rather than all simultaneously. This provides a more visible and distinctive indicator signal that is easier for other road users to notice, improving rear visibility and road safety. How can the BR280ARW be mounted? The BR280ARW can be surface mounted using the 116mm mounting hole centre, or bolt mounted using the twin rear studs for horizontal or vertical mounting surfaces, providing flexibility for different trailer and vehicle rear panel configurations. Is the BR280ARW compatible with 24V systems? Yes. The BR280ARW operates across 10-30V DC, compatible with both 12V and 24V vehicle and trailer electrical systems. How many functions does the BR280ARW provide? The BR280ARW provides six functions: stop, tail, sequential indicator, reverse, fog, and integrated retro reflector, making it one of the most complete single rear combination lamp units in the BR280 Series.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR207LR LED Combination Lamp Twin Pack Stop Tail Indicator and Reflector An ADR-approved 12V LED rectangle combination lamp twin pack from the Roadvision BR207 Series, the BR207LR features stop, tail, indicator, and integrated reflector functions with polycarbonate lens and housing, 100mm mounting hole centre, and a 300mm tinned copper pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR207LR is a compact LED combination lamp from the BR207 Series supplied as a twin pack, designed as a simple DIY trailer lighting solution for budget-conscious consumers. Six indicator LEDs and 6 stop/tail LEDs per lamp deliver more light output than equivalent incandescent lamps while drawing a fraction of the current at 12V DC. The polycarbonate lens and housing is waterproof, dustproof, and submersible with a 100,000 hour rated LED lifespan. The integrated reflector is built into the housing. Easy twin stud surface mount installation with stainless steel hardware. Pre-wired with a 300mm tinned copper cable with earth (white), stop (red), rail (brown), and indicator (green or yellow) wires. ADR and ECE approved for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611) functions. CTA approval CTA-060546. Backed by a 5-year warranty. Features & Benefits Twin Pack for Complete Trailer Rear Lamp Installation: The BR207LR is supplied as a twin pack, providing both left and right lamps for a complete trailer rear lamp installation in a single purchase. Stop, Tail, Indicator, and Integrated Reflector Functions: Combines stop, tail, indicator, and integrated reflector functions in a single compact unit. ADR and ECE Approved for All Functions: ECE approval numbers for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611), and CTA approval CTA-060546, confirming compliance with Australian road safety requirements. 6 LEDs Per Function - Indicator and Stop/Tail: Six LEDs per function produce more light output than equivalent incandescent lamps with minimal current draw. Polycarbonate Lens and Housing - Waterproof Submersible: Sealed polycarbonate construction provides full waterproof, dustproof, and submersible protection for boat trailer and all-weather applications. 100,000 Hour LED Lifespan - Fit and Forget: Maintenance-free solid-state technology eliminates bulb replacements. 12V DC Input: Compatible with standard 12V trailer and vehicle electrical systems. Easy Twin Stud Surface Mount with Stainless Steel Hardware: Integrated twin mounting studs with stainless steel hardware provide simple, secure, corrosion-resistant installation. 300mm Tinned Copper Pre-Wired Cable: Corrosion-resistant tinned copper wiring with earth (white), stop (red), rail (brown), and indicator (green or yellow) wires. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR207LR Brand Roadvision Series BR207 Description Rect Stop/Tail/Ind/Ref Twin Pack Functions Stop, Tail, Indicator, Reflector LED Quantity - Indicator 6 LEDs LED Quantity - Stop/Tail 6 LEDs Input Voltage 12V DC Current Draw - Indicator 0.09A at 13.8V Current Draw - Stop 0.09A at 13.8V Current Draw - Tail 0.02A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 150mm x 80mm x 23mm Mounting Hole Centre 100mm Mount Twin Stud Surface Mount with Stainless Steel Hardware Cable Length 300mm Tinned Copper Wiring Earth - White, Stop - Red, Rail - Brown, Indicator - Green or Yellow Pack Quantity 2 Lamps ECE Indicator Approval E4-6R-0115611 ECE Stop/Tail Approval E4-7R-0215611 ECE Reflector Approval E4-3R-0215611 CTA Approval CTA-060546 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR207LR is compatible with 12V DC trailer and vehicle electrical systems. ADR and ECE approved for on-road use. Confirm mounting and wiring requirements before purchase. A version with licence plate lamp is available as the BR207LRNP. Multi-volt versions are available as the BR207MV and BR207NPMV. Frequently Asked Questions Is the BR207LR ADR approved for on-road use? Yes. The BR207LR holds ECE approval numbers for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611) functions, and CTA approval CTA-060546. Is the BR207LR waterproof for boat trailer use? Yes. The sealed polycarbonate lens and housing provide waterproof and submersible protection, making the BR207LR suitable for boat trailer applications. How many lamps are in the BR207LR pack? The BR207LR is a twin pack containing two lamps for a complete left and right trailer rear lamp installation. What is the difference between the BR207LR and the BR207LRNP? Both are 12V twin packs with the same lamp specifications. The BR207LRNP adds an integrated licence plate lamp with 4 LEDs and includes a kit with additional components. The BR207LR does not include a licence plate lamp. Is the BR207LR compatible with 24V systems? No. The BR207LR is a 12V DC unit only. For multi-volt 10-30V DC compatibility, refer to the BR207MV or BR207NPMV.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Interior LED Light 61 SMD LEDs, 30W Equivalent, 120° Spread, 300mm Product Overview The LED Autolamps 1061/24 is a 24V slimline interior LED light bar measuring 300mm x 25mm x 10mm, fitted with 61 SMD LEDs and equivalent in output to a 30W incandescent globe. Delivering a 120° spread for broad, even illumination, it's designed for truck cab interiors, sleeper berths, and commercial vehicle cabins running 24V electrical systems. The low-profile 10mm depth sits neatly on ceilings and panels without adding bulk. Backed by a 3-year warranty. Features & Benefits 61 SMD LEDs — high LED count across a 300mm bar delivers even, consistent interior illumination 30W equivalent output — matches the brightness of a standard 30W incandescent globe with significantly lower power consumption 120° spread — wide beam angle delivers broad, even illumination across the interior space without hotspots Low-profile slimline design — 300mm x 25mm x 10mm form factor mounts flush to ceilings and panels without adding bulk 24V only — designed specifically for 24V heavy transport and commercial vehicle electrical systems 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 1061/24 Lamp Type Interior Light LED Configuration 61 x SMD Equivalent Output 30W incandescent Beam Angle 120° Voltage 24V Dimensions 300mm x 25mm x 10mm Light Style Rectangle Warranty 3 years Weight 0.08 kg Compatible With / Goes Well With 24V truck cabs, sleeper berths, and commercial vehicle interiors Heavy transport and large vehicle electrical systems running 24V LED Autolamps 1031/24 interior lamp (same 24V series, different form factor) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions Is the 1061/24 suitable for 12V systems? No. The 1061/24 is a 24V-only light, designed specifically for heavy transport and commercial vehicles running 24V electrical systems. What does 30W equivalent mean? The 1061/24 produces light output comparable to a 30W incandescent globe while using significantly less power — the LED technology delivers the same visible brightness with lower energy consumption and a longer lifespan. What is the beam angle of the 1061/24? The 1061/24 delivers a 120° spread, providing broad, even illumination across interior spaces without concentrated hotspots. How slim is the 1061/24 profile? At just 10mm deep and 25mm wide, the 1061/24 is an ultra-slim bar lamp that mounts virtually flush to ceilings and panels — suitable for even the tightest interior spaces. What warranty does the 1061/24 carry? The 1061/24 is backed by a 3-year warranty from LED Autolamps. Weight 0.08 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less