ADR Approved 12/24V Reverse Lamp with Grommet and Plug Recessed Mount, IP67
Product Overview
The LED Autolamps 130WMG is a 12/24V LED reverse lamp supplied with a grommet and plug for a complete, sealed recessed installation. Mounted via two screws and rated IP67, it delivers ADR-approved reverse light output for trailers, trucks, and commercial vehicles completing the 130 series alongside the 130AMG indicator and 130RMG stop/tail lamps for a fully matched grommet-mount rear lighting set.
Drawing just 0.15A at 13.8V and backed by a 5-year warranty.
Features & Benefits
Grommet and plug included — complete sealed installation kit for a weatherproof recessed fit straight out of the blister pack
Recessed mount — sits flush with the panel for a clean, integrated finish on trailer and truck body panels
2-screw mount — secure, stable installation using two screws through the mounting panel
ADR road approved — meets Australian Design Rules for legal on-road use as a reverse lamp
IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
Low current draw — 0.15A at 13.8V for efficient operation across multi-lamp trailer builds
12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
Specification
Detail
SKU
130WMG
Lamp Type
Reverse
Voltage Range
12V / 24V
Current Draw
0.15A @ 13.8V
Mounting
Recessed, 2-screw
Included Accessories
Grommet, plug
Protection Rating
IP67
Compliance
ADR
Warranty
5 years
Compatible With / Goes Well With
Trailers, trucks, and commercial vehicles requiring recessed reverse lamps with grommet
12V light vehicles and 24V heavy transport applications
Trailer builds requiring ADR-approved reverse lighting
LED Autolamps 130AMG indicator lamp (same 130 series with grommet)
LED Autolamps 130RMG stop/tail lamp (same 130 series with grommet)
LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 130WMG approved for road use in Australia?
Yes. The LED Autolamps 130WMG is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a reverse lamp.
What accessories are included with the 130WMG?
The pack includes a grommet and plug, providing everything needed for a complete, sealed recessed installation straight out of the pack.
How does the 130WMG complete the 130 series?
The 130WMG is the reverse lamp in the 130 grommet-mount series, pairing with the 130AMG indicator and 130RMG stop/tail lamps for a fully matched rear lighting set across all three functions.
What is the IP rating on the 130WMG?
The 130WMG is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting.
What warranty does the 130WMG carry?
The 130WMG is backed by a 5-year warranty from LED Autolamps.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Ideal For Surface Mount Downlighting!Round Saturn LED Interior LampThe Narva 87502 is a smooth yet powerful SMD LED's with a ‘Dim' setting and an in-built touch-sensitive switch. Ultra slim surface mount design maximises headroom in enclosed cabin areas.Please Note: Touch Sensitive Switch, On - Dim - OffFeatures: Touch Sensitive On/Dim/Off Switch Ideal for surface mount downlighting Requires Only a 10mm Specifications: Input Voltage Range: 9 - 33V Light Style: Interior Light Light Type: LED Current Draw:0.19A @ 12V0.1A @ 24V Size: 130mm Weight: 0.15kg
Legendary Products & Support From Authorized Dealers
When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized NARVA dealer today!
Quality Internal Components that Protect Against Clogging Features: Longer Life - Quality internal components that protect against clogging Efficient flow - Increased performance and fuel economy Meets or exceeds original manufacturers standards New car warranty protection Specifications: Unit of Measure: EACH Description: Ryco Fuel Filter Cartridge Warranty: Service Interval Type: Cartridge Weight: .1kg Item Type: Filter (Fuel) Suits: Holden Colorado 7 Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 6sp Auto 4dr Wagon 4 Wd [06/12 - 06/17] Holden Colorado Rg 2.5 L Duramax 2.5 Dohc 16v Turbo Diesel Direct Inj. 4cyl 110k W 5sp Man 2dr Cab Chassis & Pickup Rwd [06/12 - 05/14] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 132k W 5sp Man 2dr Cab Chassis & Pickup 4 Wd [06/12 - 09/13] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 132k W 5sp Man 2dr Cab Chassis & Pickup Rwd [06/12 - 09/13] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 132k W 5sp Man 4dr Cab Chassis & Pickup 4 Wd [06/12 - 09/13] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 132k W 5sp Man 4dr Cab Chassis & Pickup Rwd [06/12 - 09/13] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 132k W 6sp Auto 2dr Cab Chassis & Pickup 4 Wd [06/12 - 09/13] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 132k W 6sp Auto 2dr Cab Chassis & Pickup Rwd [06/12 - 09/13] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 132k W 6sp Auto 4dr Cab Chassis & Pickup 4 Wd [06/12 - 09/13] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 132k W 6sp Auto 4dr Cab Chassis & Pickup Rwd [06/12 - 09/13] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Auto 2dr Cab Chassis & Pickup 4 Wd [10/13 On] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Auto 2dr Cab Chassis & Pickup Rwd [10/13 On] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Auto 4dr Cab Chassis & Pickup 4 Wd [10/13 On] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Auto 4dr Cab Chassis & Pickup Rwd [10/13 On] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Man 2dr Cab Chassis & Pickup 4 Wd [10/13 On] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Man 2dr Cab Chassis & Pickup Rwd [10/13 - 12/19] Fuel Filter 1 Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Man 4dr Cab Chassis & Pickup 4 Wd [10/13 On] Holden Colorado Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Man 4dr Cab Chassis & Pickup Rwd [10/13 - 12/19] Fuel Filter 1 Holden Trailblazer Rg 2.8 L Duramax 2.8 Dohc 16v Turbo Diesel Direct Inj. 4cyl 147k W 6sp Auto 4dr Wagon 4 Wd [07/16 On]
Legendary Products & Support From Authorized Dealers
When you choose RYCO, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized RYCO dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by RYCO's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized RYCO dealer today!
Quality Internal Components that Protect Against Clogging Features: Longer Life - Quality internal components that protect against clogging Efficient flow - Increased performance and fuel economy Meets or exceeds original manufacturer standards New car warranty protection Specifications: Warranty: Service Interval Type: Cartridge Weight: .1kg Height: 118mm Item Type: Filter (Engine Oil) Inner Diameter Bottom: 28mm Inner Diameter Top: 28mm Outer Diameter Bottom: 72mm Outer Diameter Top: 72mm OEM Number: 415238020 Suits: LEXUS ISF USE20R 5.0L 2UR-GSE DOHC-PB 32v Petrol Direct & Port Inj. V8 311kW 8sp Auto 4dr Sedan RWD [01/08 - 12/14] LEXUS LX450d VDJ201R 4.5L 1VD-FTV DOHC-PB 32v Twin-Turbo Diesel Direct Inj. V8 200kW 6sp Auto 4dr Wagon 4WD [01/17 - 12/21] LEXUS LX570 URJ201R 5.7L 3UR-FE DOHC-PB 32v MPFI V8 270kW 6sp Auto 4dr Wagon 4WD [01/07 - 12/15] LEXUS LX570 URJ201R 5.7L 3UR-FE DOHC-PB 32v MPFI V8 270kW 8sp Auto 4dr Wagon 4WD [01/15 - 12/21] TOYOTA LANDCRUISER URJ202R 4.6L 1UR-FE DOHC-PB 32v MPFI V8 6sp Auto 4dr Wagon 4WD [03/12 - 12/19] TOYOTA LANDCRUISER VDJ200R 4.5L 1VD-FTV DOHC-PB 32v Twin-Turbo Diesel Direct Inj. V8 200kW 6sp Auto 4dr Wagon 4WD [09/07 ON] TOYOTA LANDCRUISER VDJ76R 4.5L 1VD-FTV DOHC-PB 32v Turbo Diesel Direct Inj. V8 151kW 5sp Man 4dr Wagon 4WD [01/07 ON] TOYOTA LANDCRUISER VDJ78R 4.5L 1VD-FTV DOHC-PB 32v Turbo Diesel Direct Inj. V8 151kW 5sp Man 3dr Troopcarrier 4WD [01/07 ON] TOYOTA LANDCRUISER VDJ79R 4.5L 1VD-FTV DOHC-PB 32v Turbo Diesel Direct Inj. V8 151kW 5sp Man 2dr Cab Chassis & Pickup 4WD [01/07 ON] TOYOTA LANDCRUISER VDJ79R 4.5L 1VD-FTV DOHC-PB 32v Turbo Diesel Direct Inj. V8 151kW 5sp Man 4dr Cab Chassis & Pickup 4WD [08/12 ON] TOYOTA TUNDRA USK55/56/57 (GREY IMPORT) 5.7L 3UR-FE DOHC-PB 32v MPFI V8 6sp Auto 4dr Pickup 4WD [01/07 - 07/18]
Legendary Products & Support From Authorized Dealers
When you choose RYCO, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized RYCO dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by RYCO's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized RYCO dealer today!
"Get Connected" with Our Range of Cables, Leads & Adaptors
DNA AAR102 Male to Male RCA Joiners
Male RCA to male RCA audio adaptors gold plated with black and red colour coded markers.
Features:
Pack Size: 2 Pack
Packaging: Sliding Blister & Card With Hang Hole
Legendary Products & Support From Authorized Dealers
When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized DNA dealer today!
Rockford Fosgate R2-500X4 Prime 500 Watt 4-Channel Full-Range Class-D Car Amplifier
A 500W 4-channel Full-Range Class-D car amplifier delivering 125W x 4 at 2-ohm or 250W x 2 at 4-ohm bridged (CTA-2006 rated). Features independent front and rear channel crossover control with all-pass mode, 2/4 channel input selection switch, RCA pass-through outputs, C.L.E.A.N. gain calibration with per-channel output clip indicators, Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management. Designed and engineered in Tempe, Arizona. Backed by a 1 year warranty.
Product Overview
The Rockford Fosgate R2-500X4 is a 500W 4-channel Full-Range Class-D car amplifier from the Prime R2 series, purpose-built for powering car speaker pairs across the full audio spectrum. Rated continuous power is 75W x 4 at 4-ohm, 125W x 4 at 2-ohm, or 250W x 2 at 4-ohm bridged (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 90W x 4 at 4-ohm, 160W x 4 at 2-ohm, and 300W x 2 at 4-ohm bridged.
The R2-500X4 provides independent front and rear channel crossover control, each with fully adjustable high-pass and low-pass filters at 12dB/octave Butterworth (50Hz-250Hz) and an all-pass mode for full-bandwidth output. Independent front and rear variable input gain adjustment is provided. A 2/4 channel input selection switch configures the amplifier for source units with either 2 or 4 RCA outputs, working for both RCA and high-level inputs. RCA pass-through outputs allow downstream amplifier chaining - the R2-750X1 monoblock subwoofer amplifier is the natural companion for a complete car audio system. Auto-Sense turn-on activates the amplifier when a speaker-level signal is detected, with a RAP bypass switch for Retained Accessory Power systems.
C.L.E.A.N. provides separate input and output clip indicators for both front and rear channel groups. Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management are all active. Cast aluminium heatsink with convection cooling. Designed and engineered in Tempe, Arizona.
Features & Benefits
Full-Range Class-D - Efficient 4-Channel Car Audio Amplification: Full-Range Class-D topology delivers high-efficiency power across the complete 20Hz-20kHz audio spectrum, reducing current demand on the vehicle's electrical system while powering speaker pairs with clean, accurate output.
Independent Front and Rear Crossover Control with All-Pass Mode: Front and rear channels each have independent high-pass and low-pass crossover controls at 12dB/octave Butterworth (50Hz-250Hz) plus an all-pass mode for full-bandwidth output, giving more flexibility than a single shared crossover.
2/4 Channel Input Selection Switch: The input selection switch configures the R2-500X4 to accept either a 2-channel or 4-channel RCA or high-level input, working with source units that have limited RCA output pairs without requiring Y-cables or signal splitting.
Bridgeable to 2-Channel - 250W Mono per Pair: The R2-500X4 can be bridged to 2-channel, delivering 250W x 2 at 4-ohm (300W dynamic), suited to driving higher-power speaker pairs or running a compact 2-channel installation.
RCA Pass-Through Outputs for Downstream Chaining: RCA pass-through outputs are active with both RCA and high-level input, allowing the signal to be passed to a downstream subwoofer amplifier such as the R2-750X1 without signal degradation.
C.L.E.A.N. Technology - Independent Per-Channel Clip Monitoring: C.L.E.A.N. provides separate input and output clip indicator LEDs for both the front and rear channel groups, enabling accurate independent gain calibration across all four channels.
Auto-Sense Turn-On with RAP Bypass: Auto-Sense activates the amplifier automatically when a high-level input signal is detected, removing the need for a dedicated remote turn-on wire. A bypass switch is included for vehicles with Retained Accessory Power systems.
Rollback Protection and NOMAD Speaker Protection: Rollback Protection dynamically manages output to prevent thermal stress during sustained high-output conditions. NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances.
Technical Specs
Specification
Detail
SKU
R2-500X4
Number of Channels
4
Total Power
500W
Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N)
75W x 4
Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N)
125W x 4
Rated Power - 4-ohm Bridged (CTA-2006)
250W x 2
Dynamic Power - 4-ohm (PowerCube)
90W x 4
Dynamic Power - 2-ohm (PowerCube)
160W x 4
Dynamic Power - 4-ohm Bridged (PowerCube)
300W x 2
Circuit Topology
Full-Range Class-D
Bridgeable
Yes
Frequency Response
20 Hz - 20 kHz
THD + Noise
Less than 1.0% at 4-ohm and 2-ohm
Input Sensitivity
Low-Level: 150mV - 4V / High-Level: 450mV - 12V
Signal Input
Front: 4 x RCA + 4-Pin Molex / Rear: 4 x RCA + 4-Pin Molex
Input Selection
2/4 Channel Switch (RCA and High-Level)
Signal Output
2 x RCA Pass-Thru (active with RCA or High-Level input)
Tone Controls
None
Front High-Pass Crossover
50 Hz - 250 Hz at 12dB/Octave Butterworth
Front Low-Pass Crossover
50 Hz - 250 Hz at 12dB/Octave Butterworth
Rear High-Pass Crossover
50 Hz - 250 Hz at 12dB/Octave Butterworth
Rear Low-Pass Crossover
50 Hz - 250 Hz at 12dB/Octave Butterworth
All-Pass
Yes
Remote Controls
None
Auto-Sense Turn-On
Yes (with RAP bypass switch)
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Cast Aluminium
Operating Voltage
9 - 16 VDC
Recommended Fuse (not included)
80A
Max Current Draw at 13.8V Sinewave
59A
Visual Indicators
Power: Blue / Protect: Red / C.L.E.A.N. In: Red / C.L.E.A.N. Out Front and Rear: Blue/Red
Dimensions (H x W x D)
49 x 173 x 255mm (1.9 x 6.8 x 10.1 inch)
CTA-2006 Compliant
Yes
Warranty
1 Year
Compatible With / Goes Well With
The R2-500X4 suits car audio builds requiring an efficient 4-channel full-range amplifier for speaker pairs at the Prime R2 price point. At 59A maximum current draw and an 80A fuse requirement, it places moderate demand on the vehicle's electrical system. The RCA pass-through output pairs naturally with the R2-750X1 mono subwoofer amplifier for a complete R2 series speaker and subwoofer system.
Goes Well With:
R2-750X1 - Companion R2 series 750W mono subwoofer amplifier, chainable via the R2-500X4's RCA pass-through outputs for a complete R2 series car audio system
R2-750X5 - Alternative single-unit 5-channel R2 series amplifier for builds requiring an integrated subwoofer channel alongside speaker amplification
R2-2X12 / R2-2X10 - Rockford Fosgate Prime dual loaded subwoofer enclosures when paired with the R2-750X1 companion monoblock
RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the installation
Frequently Asked Questions
What is the difference between the R2-500X4 and the R2-750X5?
The R2-500X4 is a 4-channel full-range amplifier rated at 125W x 4 at 2-ohm with no dedicated subwoofer channel, no Punch EQ, and no remote level control. The R2-750X5 is a 5-channel amplifier rated at 100W x 4 plus 350W subwoofer at 2-ohm, adding a dedicated subwoofer channel with Punch EQ, infrasonic filter, RLC remote level control, and a 2/4/5 channel input switch. Choose the R2-500X4 for a pure 4-channel speaker amplifier and pair it with the R2-750X1 for subwoofer duty; choose the R2-750X5 for a single-unit 5-channel solution.
Can I add a subwoofer amplifier to a system using the R2-500X4?
Yes. The R2-500X4 includes RCA pass-through outputs that are active with both RCA and high-level input, allowing a distortion-free signal to be passed to a downstream mono subwoofer amplifier such as the R2-750X1. The two amplifiers chain together cleanly for a complete 4-channel speaker plus mono subwoofer car audio system.
What does the 2/4 channel input selection switch do?
The input selection switch configures the R2-500X4 to accept either a 2-channel or 4-channel input from the source unit, working for both RCA and high-level connections. In 2-channel mode, the single stereo RCA pair feeds all four channels internally. In 4-channel mode, separate front and rear RCA pairs are used for independent left/right front and rear channel control.
What fuse does the R2-500X4 require and is it included?
The R2-500X4 requires an 80A fuse, which is not included and must be sourced separately. This is smaller than the 120A fuse required by the R2-750X5 and R2-750X1, reflecting the R2-500X4's lower maximum current draw of 59A. Install the fuse as close to the battery as possible in the 4 AWG power supply line.
Does the R2-500X4 need a dedicated remote turn-on wire?
Not necessarily. Auto-Sense activates the amplifier automatically when a high-level speaker signal is detected at the input, removing the need for a separate remote wire in OEM integration scenarios. A RAP bypass switch is included for vehicles where the source unit continues to output a signal after the ignition is switched off.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
6.75" 2-Way Component System Mica-Injected Cone, Mylar Dome Tweeter, In-Line Crossover. 40W RMS.
Product Overview
The Rockford Fosgate Prime R1675-S is a 6.75" 2-way component speaker system rated at 40W RMS the largest round woofer in the Prime component system range and the component counterpart to the R1675X2 coaxial speaker. It shares the identical construction as the R152-S (5.25") and R16-S (6"): Mica-injected polypropylene cone, foam surround, stamped steel basket, 1/2" (13mm) Mylar® dome tweeter with in-line crossover, and hardware for flush, surface, and angle tweeter mounting. The kit includes two woofers with grilles, two tweeters, two crossovers, and all mounting hardware.
The 6.75" woofer delivers the largest cone area in the Prime round component range providing the best low-frequency extension and output capacity of the three component system woofer sizes before a subwoofer takes over in the frequency range below the woofer's usable limit.
Key Specifications
Woofer size: 6.75 inch
Configuration: 2-way component (separate woofer + tweeter)
Power handling (RMS): 40W per woofer (confirmed)
Peak power: Not specified — confirm with Rockford Fosgate
Impedance: Not specified — confirm with Rockford Fosgate
Sensitivity: Not specified — confirm with Rockford Fosgate
Frequency response: Not specified — confirm with Rockford Fosgate
Woofer cone: Mica-injected polypropylene
Woofer surround: Foam
Basket: Stamped steel
Tweeter: 1/2" (13mm) Mylar® balanced dome
Crossover: In-line (one per tweeter, included)
Tweeter mounting: Flush, surface, and angle options
Grilles: Included (with woofers) ✓
Mounting hardware: Included ✓
Kit contents: 2 woofers + 2 tweeters + 2 crossovers + grilles + hardware
Mounting depth: Not specified — confirm with Rockford Fosgate
Cutout diameter: Not specified — confirm with Rockford Fosgate
Weight: Not specified — confirm with Rockford Fosgate
Warranty: Not specified — confirm with Rockford Fosgate
Features & Benefits
6.75" Woofer — Largest Round Woofer in the Prime Component Range — The biggest round cone in the Prime component lineup, providing the greatest cone area and best low-frequency extension of the three component system sizes — a meaningful advantage for front door positions in vehicles with 6.75" speaker cutouts.
Mica-Injected Polypropylene Cone — Stiffened polypropylene compound for reduced distortion and more accurate midrange reproduction under dynamic load — the same cone construction used across the Prime component range.
1/2" (13mm) Mylar® Dome Tweeter — Consistent high-frequency driver across the Prime component range — bright, detailed, extended treble reproduction.
In-Line Crossover — Integrated into the tweeter cable for simplified installation. No crossover box to mount separately.
Three Tweeter Mounting Options — Flush, surface, and angle hardware included — same flexibility as R152-S and R16-S.
Complete Kit Contents — Two woofers with grilles, two tweeters, two crossovers, and all hardware for a complete two-channel front installation.
Foam Surround Note — The R1675-S uses a foam surround in common with the R152-S and R16-S. Same long-term durability consideration applies — see FAQ #4.
Technical Specs
Specification
Detail
Brand
Rockford Fosgate
Part Number
R1675-S
Series
Prime
Woofer Size
6.75 inch
Configuration
2-Way Component
Power Handling (RMS)
40W per woofer ✓
Peak Power
Not specified
Sensitivity
Not specified — confirm with Rockford Fosgate
Frequency Response
Not specified — confirm with Rockford Fosgate
Woofer Cone
Mica-Injected Polypropylene
Woofer Surround
Foam
Basket
Stamped Steel
Tweeter
1/2" (13mm) Mylar® Dome
Crossover
In-Line (one per tweeter, included)
Tweeter Mounting
Flush / Surface / Angle
Grilles
Included ✓
Mounting Hardware
Included ✓
Kit Contents
2 woofers + 2 tweeters + 2 crossovers + grilles + hardware
Impedance
Not specified — confirm with Rockford Fosgate
Mounting Depth
Not specified — confirm with Rockford Fosgate
Cutout Diameter
Not specified — confirm with Rockford Fosgate
Weight
Not specified — confirm with Rockford Fosgate
Warranty
Not specified — confirm with Rockford Fosgate
Compatible With / Goes Well With
Suitable installation:
6.75" front door speaker positions — common in Chrysler, Dodge, Jeep, and selected other vehicles
OEM installation in factory 6.75" speaker locations
Prime component system full range:
Model
Woofer
RMS
Cone
Tweeter
R152-S
5.25"
40W ✓
Mica Polypropylene
Mylar
R16-S
6"
40W ✓
Mica Polypropylene
Mylar
R1675-S
6.75"
40W ✓
Mica Polypropylene
Mylar
Counterpart coaxial: Rockford Fosgate R1675X2 (6.75" 2-way coaxial) — for the same vehicle position in a simpler, single-unit installation.
Pairs well with:
Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers
Dedicated subwoofer system for full-range bass extension
Frequently Asked Questions
What is included in the R1675-S kit?
Two 6.75" woofers with grilles, two 1/2" Mylar dome tweeters, two in-line crossovers, and all mounting hardware — a complete two-channel front component speaker installation kit.
How does the R1675-S differ from the R16-S?
Both are Prime component systems with identical construction. The R1675-S uses a 6.75" woofer versus the R16-S's 6" — providing a larger cone area and improved low-frequency extension. Select based on which size fits your vehicle's front door speaker positions.
What is the benefit of the R1675-S component system over the R1675X2 coaxial speaker?
Both are 6.75" Rockford Fosgate Prime speakers. The R1675X2 coaxial places both drivers in a single unit — simpler installation, single mounting location. The R1675-S component system separates the woofer and tweeter — the tweeter can be positioned independently at ear level for improved soundstage and imaging at the cost of more complex installation.
Does the foam surround affect durability?
The foam surround performs well acoustically but can be more susceptible to heat degradation over many years than rubber. For most Australian installations over a standard ownership period this is not a practical concern. Confirm expected longevity with Rockford Fosgate if very long-term surround integrity is a priority.
What crossover is included?
An in-line crossover per tweeter is included — integrated into the tweeter cable rather than a separate box. Crossover point and slope are not confirmed in the supplier data — pull the official Rockford Fosgate R1675-S datasheet for these specifications.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
10" P3S Shallow 4-Ohm DVC 300W RMS, 83dB, 42Hz Fs, 89mm Depth, 230mm Cutout. Confirmed Enclosure Volumes: 14.1L Sealed, 28.3L Vented.
Product Overview
The Rockford Fosgate Punch P3SD4-10 is a 10" 4-Ohm Dual Voice Coil (DVC) shallow subwoofer rated at 300W RMS (600W peak) the most completely specified P3S model in the supplier data. The full specification set includes 83dB sensitivity, 42Hz free-air resonance, 8.1mm Xmax, 89mm (3.50") mounting depth, 230mm (9.06") cutout diameter, and Rockford Fosgate's confirmed enclosure recommendations: 0.5 cu ft (14.1 litres) sealed, 1.0 cu ft (28.3 litres) vented. CEA-2031 compliant. Input terminals are confirmed Dual 10-AWG compression consistent with the P3D2-10 and P2D4-10 spec tables, and confirming that "push terminals" in P3S features lists is a supplier data error.
The 4-Ohm DVC provides wiring options of 2-Ohm (parallel), 8-Ohm (series), or 4-Ohm per coil for bi-amplification no 1-Ohm stability requirement. All confirmed P3S construction applies: anodised aluminium cone and dustcap, M-Roll Santoprene surround, dual linear spider, StampCast basket with spider venting, and diamond-cut cast aluminium trim ring.
Key Specifications
Subwoofer size: 10 inch (shallow)
Voice coil configuration: Dual Voice Coil (DVC)
Impedance: 4-Ohm per coil (2-Ohm parallel / 8-Ohm series / 4-Ohm biamp)
Power handling (RMS): 300W ✓ (CEA-2031)
Power handling (peak): 600W ✓
Sensitivity (SPL): 83dB @ 1W/1M ✓
Free-air resonance (Fs): 42Hz ✓
Xmax: 8.1mm ✓
Mounting depth: 3.50" (89mm) ✓
Cutout diameter: 9.06" (230mm) ✓
Voice coil diameter: 2.5" (65.5mm) ✓
Magnet weight: 47 oz (1.32 kg) ✓
Effective piston area (Sd): 333 cm² ✓
Equivalent air volume (Vas): 14.3 litres ✓
Total Q (Qts): 0.78 ✓
Electrical Q (Qes): 0.90 ✓
Mechanical Q (Qms): 6.00 ✓
Voice coil inductance (Le): 4.3 mH ✓
DC resistance (Re): 6.80 Ohms ✓
Woofer displacement: 0.074 cu ft (2.1 litres) ✓
Recommended sealed enclosure: 0.5 cu ft (14.1L) ✓
Recommended vented enclosure: 1.0 cu ft (28.3L) ✓
Shipping weight: 11.9 lbs (5.39 kg) ✓
CEA-2031 compliant: Yes ✓
Input terminals: Dual 10-AWG compression ✓
Cone: Anodised aluminium ✓
Dustcap: Anodised aluminium ✓
Surround: M-Roll Santoprene ✓
Spider: Dual linear with embedded 16 AWG tinsel leads ✓
Basket: StampCast with integrated spider venting ✓
Trim ring: Diamond-cut cast aluminium (grille insert compatible) ✓
Motor assembly: Shallow ✓
Enclosure compatibility: Sealed and vented ✓
Sold as: Individual unit
Warranty: Not specified — confirm with Rockford Fosgate
Features & Benefits
300W RMS / 600W Peak — CEA-2031 — 300W RMS confirmed to the CEA-2031 standard — the same sustained power as the P3SD2-10, delivered in the 4-Ohm impedance format.
89mm Mounting Depth — Confirmed — At 3.50" (89mm), the P3SD4-10's mounting depth is confirmed. This is significantly shallower than the standard P3D2-10 (156.8mm) — making the P3SD4-10 suitable for shallow enclosures, rear doors with limited depth, or under-seat installations that the full-depth P3 cannot fit.
230mm Cutout Diameter — The confirmed 9.06" (230mm) cutout is slightly smaller than the standard 10" P3 (232mm) — check baffle dimensions against this confirmed figure.
Confirmed Enclosure Volumes:
Sealed: 0.5 cu ft (14.1 litres)
Vented: 1.0 cu ft (28.3 litres)
83dB Sensitivity — The 83dB @ 1W/1M is slightly lower than the standard P3D4-10 (from the P3D2-10's 82dB reference), consistent with the shallow motor's Fs of 42Hz and Qts of 0.78.
42Hz Free-Air Resonance (Fs) — The Fs of 42Hz is higher than full-depth P3 subwoofers (P3D2-10: 26.6Hz), reflecting the shallow motor's stiffer suspension. This affects the enclosure design: the sealed box resonance will be higher than full-depth drivers in the same volume.
8.1mm Xmax — 8.1mm of linear peak excursion — less than the 15.2mm of the full-depth P3D2-10, consistent with the shallow motor's reduced excursion range.
Qts = 0.78 — The higher Qts (versus 0.49 for the full-depth P3D2-10) is characteristic of shallow motor designs. At 0.78, the driver is well-suited to the 14.1L sealed box recommendation; the vented alignment at 28.3L provides additional output at bass frequencies above the port tuning point.
4-Ohm DVC — Broad Amplifier Compatibility:
2-Ohm (parallel): Most common configuration
8-Ohm (series): For amplifiers with higher minimum impedance
4-Ohm per coil (biamp): Separate channels
Compression Terminals Confirmed — The spec table confirms Dual 10-AWG compression — the correct terminal type across the P2/P3/P3S range. Update all P3S features list descriptions accordingly.
Anodised Aluminium Cone, M-Roll Santoprene Surround — P3S platform materials confirmed.
Technical Specs
Specification
Detail
Brand
Rockford Fosgate
Part Number
P3SD4-10
Series
Punch P3S (Shallow)
Subwoofer Size
10 inch (shallow)
Voice Coil
Dual Voice Coil (DVC)
Impedance per Coil
4-Ohm ✓
Wiring Options
2-Ohm (parallel) / 8-Ohm (series) / 4-Ohm biamp ✓
Power Handling (RMS)
300W ✓ (CEA-2031)
Power Handling (Peak)
600W ✓
Sensitivity
83dB @ 1W/1M ✓
Fs
42Hz ✓
Xmax
8.1mm ✓
Cutout Diameter
9.06" (230mm) ✓
Mounting Depth
3.50" (89mm) ✓
Voice Coil Diameter
2.5" (65.5mm) ✓
Magnet Weight
47 oz (1.32 kg) ✓
Sd
333 cm² ✓
Vas
14.3 litres ✓
Qts
0.78 ✓
Qes
0.90 ✓
Qms
6.00 ✓
Le
4.3 mH ✓
Re
6.80 Ohms ✓
Woofer Displacement
0.074 cu ft / 2.1L ✓
Sealed Enclosure (Vb)
0.5 cu ft (14.1L) ✓
Vented Enclosure (Vb)
1.0 cu ft (28.3L) ✓
Shipping Weight
11.9 lbs (5.39 kg) ✓
CEA-2031 Compliant
Yes ✓
Input Terminals
Dual 10-AWG Compression ✓
Cone
Anodised Aluminium ✓
Dustcap
Anodised Aluminium ✓
Surround
M-Roll Santoprene ✓
Spider
Dual Linear, Embedded 16 AWG Tinsel Leads ✓
Basket
StampCast with Integrated Spider Venting ✓
Motor
Shallow ✓
Trim Ring
Diamond-Cut Cast Aluminium (Grille Compatible) ✓
Enclosure Type
Sealed and Vented ✓
Sold As
Individual Unit
Warranty
Not specified — confirm with Rockford Fosgate
Compatible With / Goes Well With
Confirmed enclosure volumes:
Sealed: 0.5 cu ft (14.1 litres) net internal
Vented: 1.0 cu ft (28.3 litres) net internal — confirm port dimensions from Rockford Fosgate
Wiring:
2-Ohm → parallel
8-Ohm → series
4-Ohm per coil → biamp
Pairs well with:
A mono amplifier rated at 300W RMS at 2-Ohm
A shallow sealed 14.1L or vented 28.3L enclosure
Weight
5.39 kg (11.9 lbs)
Frequently Asked Questions
What are the confirmed enclosure volumes for the P3SD4-10?
Sealed: 0.5 cu ft (14.1 litres); Vented: 1.0 cu ft (28.3 litres). Both are Rockford Fosgate's official confirmed recommendations. Confirm vented port dimensions from the official P3SD4-10 installation guide.
Why is the Fs of the P3SD4-10 higher than a full-depth subwoofer?
An Fs of 42Hz reflects the shallow motor's stiffer suspension — required to control the cone within a reduced excursion range. Full-depth subwoofers with long-travel motors have lower Fs values (e.g. the P3D2-10 at 26.6Hz) because their suspensions are more compliant over a greater travel distance. The higher Fs means the P3SD4-10's useful bass extension begins at a higher frequency than full-depth drivers.
What is the confirmed mounting depth?
89mm (3.50") — confirmed in the specification table.
What does the 230mm cutout mean for enclosure building?
A 9.06" (230mm) cutout is required in the baffle. This is 2mm smaller than the standard 232mm cutout on the full-depth P3D4-10 and P2D4-10 — a meaningful difference if using a pre-drilled enclosure. Confirm the exact cutout before purchase.
Are the terminals push or compression?
The specification table confirms Dual 10-AWG compression terminals — the correct type across the P2, P3, and P3S range. The "push terminals" language in features lists is a consistent supplier data error.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Rockford Fosgate R2-200X2 Prime 200 Watt 2-Channel Class D Amplifier
When two channels need real power without compromise, the R2-200X2 delivers 200 watts of clean, efficient Class D performance engineered by Rockford Fosgate.
Product Overview
The R2-200X2 is part of Rockford Fosgate's 3rd generation Prime Series, built for car audio enthusiasts who demand reliable, high-performance amplification at an accessible price. Operating as a full-range Class D 2-channel amplifier, it runs at 4 ohm or 2 ohm stereo and 4 ohm bridged/mono, giving it the flexibility to drive a front speaker pair in stereo or bridge down to a single channel to power a subwoofer. Class D topology maximises efficiency and reduces the electrical load on the vehicle's charging system, while MEHSA 4 (Maximum Efficiency Heat Sink Application) actively reduces MOSFET temperatures, lowers distortion, and prolongs output device lifespan. The top-mounted control panel keeps all adjustments within easy reach, and CTA-2006 compliant power ratings confirm that the 200W output is a real, tested figure. Designed and engineered in Tempe, Arizona, the R2-200X2 is built by fanatics, for fanatics.
Features & Benefits
C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red) to accurately match the source unit's output to the amplifier's input sensitivity, eliminating guesswork and reducing distortion at the source.
P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range.
MEHSA 4 (Maximum Efficiency Heat Sink Application): Advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use.
NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's outputs and protects against shorting speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone.
Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage.
Fully Adjustable Butterworth Crossovers: 12 dB/octave High-Pass and Low-Pass crossovers, continuously variable from 50 to 250 Hz, with an All-Pass option for full-range output when no filtering is needed.
High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V), making integration with factory head units straightforward.
Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire.
RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing a downstream amplifier to be added without splitting cables at the head unit.
CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications.
Technical Specs
Specification
Detail
SKU
R2-200X2
Series
Prime
Number of Channels
2
Amplifier Class
Class D, Full Range
Total RMS Power
200W
RMS Power @ 4 Ohm
50W x 2
RMS Power @ 2 Ohm
100W x 2
Bridged Power @ 4 Ohm
200W x 1
Dynamic Power @ 4 Ohm
60W x 2
Dynamic Power @ 2 Ohm
107W x 2
Dynamic Power Bridged @ 4 Ohm
215W x 1
Bridgeable
Yes
Minimum Impedance (Stereo)
2 Ohm
Minimum Impedance (Bridged)
4 Ohm
Frequency Response
20 Hz - 20 kHz
THD @ 4 Ohm
<1.0%
THD @ 2 Ohm
<1.0%
Input Sensitivity (Low-Level)
150 mV - 4V
Input Sensitivity (High-Level)
450 mV - 12V
Signal Input
2 x RCA low-level, 4-Pin Molex high-level
Signal Output
2 x RCA pass-through (active with RCA or high-level input)
Crossover
High-Pass / Low-Pass: 50-250 Hz @ 12 dB/octave Butterworth
All-Pass
Yes
Tone Controls
No
Remote Controls
No
Visual Indicators
POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT (Blue/Red)
Operating Voltage
9-16V DC
Max Current Draw (13.8V Sinewave)
18A
Recommended Fuse
30A (not included)
Power Wire Gauge
4 AWG
Speaker Wire Gauge
8 AWG
Power Input Connector
Compression Terminal Block
Speaker Output Connector
Compression Terminal Block
Cooling
Convection / Heatsink (MEHSA 4)
Dimensions (H x W x D)
1.9" x 6.8" x 8.1" (4.9 cm x 17.3 cm x 20.5 cm)
Warranty
1 Year
Compliance
CTA-2006, CE
Goes Well With
The R2-200X2 pairs naturally with Rockford Fosgate Prime Series full-range speakers such as the R165X3, R168X2, R169X2, and R169X3 for a front stereo speaker setup. When bridged to mono at 4 ohms, it can also serve as a dedicated subwoofer channel, making it a compact single-amplifier solution for smaller builds. For systems requiring both speaker and dedicated subwoofer amplification, the R2-200X2 pairs directly with the R2-250X1 monoblock using the onboard RCA pass-through. A 4-gauge amplifier wiring kit is required for power and ground runs, and 8-gauge cable is needed for speaker outputs.
Frequently Asked Questions
Can the R2-200X2 power both front speakers and a subwoofer at the same time?
Not simultaneously through both channels. In stereo mode, the R2-200X2 powers two speakers independently. When bridged to mono, it delivers 200 watts into a single 4-ohm load, suitable for a subwoofer, but the stereo channels are no longer available in that configuration. For a system requiring both speaker and subwoofer amplification, pairing the R2-200X2 with a dedicated monoblock such as the R2-250X1 is the recommended approach.
Does the R2-200X2 require a remote turn-on wire?
When using RCA inputs, a remote turn-on wire must be connected to the head unit's remote output. When using high-level speaker inputs, the Auto-Sense bypass switch can be enabled to allow the amplifier to detect an incoming signal and power on automatically, making it compatible with factory head units and systems that lack a dedicated remote output, including those with Retained Accessory Power (RAP).
What does the NOMAD protection system do?
NOMAD is a real-time analogue computer built into the R2-200X2 that continuously monitors the amplifier's speaker outputs. It protects the amplifier from damage caused by shorted speaker wires and dangerously low speaker impedances, providing active, dynamic protection rather than relying solely on a fuse.
What gauge power, ground, and speaker wire does the R2-200X2 require?
Rockford Fosgate specifies 4 AWG for power and ground runs using the onboard compression terminal block connectors. Speaker output connections require 8 AWG wire. The recommended 30A fuse is not included in the box and must be sourced separately, installed as close to the battery as possible.
Can the R2-200X2 be bridged into a 2-ohm load for maximum power?
No. When bridging the R2-200X2, the minimum supported impedance is 4 ohms. Running a bridged output into a 2-ohm load is not supported and risks amplifier failure or NOMAD-triggered protection shutdown. In standard stereo mode, the minimum impedance per channel is 2 ohms.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
12" 2-Ohm DVC Punch P2 Subwoofer 400W RMS, Kevlar Cone, VAST, Dual Spider, Diamond-Cut Cast Aluminium Trim Ring, Extended Pole Piece.
Product Overview
The Rockford Fosgate Punch P2D2-12 is a 12" 2-Ohm Dual Voice Coil (DVC) subwoofer rated at 400W RMS the highest confirmed power rating in the Punch P2 series to this point in the catalogue, and a 100W step up from the P2 10" models. The larger 12" cone moves more air than the 10" format for greater bass output and lower frequency extension. The 2-Ohm DVC provides wiring options of 1-Ohm (parallel), 4-Ohm (series), or 2-Ohm per coil for bi-amplification. Optimised for sealed and vented enclosures. Sold as an individual unit.
All confirmed Punch P2 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, dual linear spider with embedded 16 AWG tinsel leads, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, diamond-cut cast aluminium trim ring with grille insert provision, and protective PVC textured magnet cover.
Key Specifications
Subwoofer size: 12 inch
Voice coil configuration: Dual Voice Coil (DVC)
Impedance: 2-Ohm per coil (1-Ohm parallel / 4-Ohm series / 2-Ohm biamp)
Power handling (RMS): 400W (confirmed)
Peak power: Not specified — confirm with Rockford Fosgate
Surround technique: VAST (up to 25% increased cone area)
Sensitivity: Not specified — confirm with Rockford Fosgate
Frequency response: Not specified — confirm with Rockford Fosgate
Xmax: Not specified — confirm with Rockford Fosgate
Cutout diameter: Not specified — confirm with Rockford Fosgate
Mounting depth: Not specified — confirm with Rockford Fosgate
Voice coil: High-temp, Nomex® reinforcement collar
Cone: Kevlar fibre-reinforced paper
Spider: Dual linear with embedded 16 AWG tinsel leads
Basket: StampCast with integrated spider venting
Pole piece: Extended
Backplate: Bumped and vented
Input terminals: Features: push — confirm vs compression with Rockford Fosgate
Trim ring: Diamond-cut cast aluminium (grille insert compatible)
Magnet cover: Protective PVC textured
Enclosure compatibility: Sealed and vented ✓
Sold as: Individual unit
Weight: Not specified — confirm with Rockford Fosgate
Warranty: Not specified — confirm with Rockford Fosgate
Features & Benefits
400W RMS — 400W RMS is the highest confirmed power handling in the P2 series and among all subwoofers in this catalogue to date. Requires an amplifier rated at 400W RMS at the selected impedance configuration.
12" Cone — Greater Air Movement — More air movement and lower frequency extension than the 10" P2D2-10 in comparable enclosures.
2-Ohm DVC — Three Wiring Options:
1-Ohm (parallel): Confirm amplifier rated stable at 1-Ohm before use
4-Ohm (series): Broad amplifier compatibility
2-Ohm per coil (biamp): Separate amplifier channels
Dual Linear Spider — Two spiders for improved compliance linearity and cone control at high excursion.
Kevlar Fibre-Reinforced Paper Cone with VAST — Stiffened paper cone plus up to 25% increased effective radiating area.
Nomex® Voice Coil Reinforcement Collar — Thermal and mechanical durability at 400W sustained.
Extended Pole Piece and Bumped Vented Backplate — Increased linear excursion; air spring prevention.
Diamond-Cut Cast Aluminium Trim Ring — Premium machined aluminium finish with grille insert provision.
StampCast Basket with Integrated Spider Venting — Motor cooling.
Technical Specs
Specification
Detail
Brand
Rockford Fosgate
Part Number
P2D2-12
Series
Punch P2
Subwoofer Size
12 inch
Voice Coil
Dual Voice Coil (DVC)
Impedance per Coil
2-Ohm ✓
Wiring Options
1-Ohm (parallel) / 4-Ohm (series) / 2-Ohm biamp ✓
Power Handling (RMS)
400W ✓
Peak Power
Not specified — confirm with Rockford Fosgate
Sensitivity
Not specified — confirm with Rockford Fosgate
Fs / Xmax / Qts
Not specified — confirm with Rockford Fosgate
Cutout Diameter
Not specified — confirm with Rockford Fosgate
Mounting Depth
Not specified — confirm with Rockford Fosgate
Surround Technique
VAST ✓
Voice Coil
High-Temp, Nomex® Collar ✓
Cone
Kevlar Fibre-Reinforced Paper ✓
Spider
Dual Linear, Embedded 16 AWG Tinsel Leads ✓
Basket
StampCast with Integrated Spider Venting
Pole Piece
Extended ✓
Backplate
Bumped and Vented ✓
Input Terminals
Features: push — confirm vs compression with Rockford Fosgate
Trim Ring
Diamond-Cut Cast Aluminium (Grille Compatible) ✓
Magnet Cover
Protective PVC Textured ✓
Enclosure Type
Sealed and Vented ✓
CEA-2031 Compliant
Not confirmed — confirm with Rockford Fosgate
Sold As
Individual Unit
Weight
Not specified
Warranty
Not specified — confirm with Rockford Fosgate
Compatible With / Goes Well With
Suitable enclosure types:
Sealed and vented — both confirmed
Fitment caution: Cutout diameter, mounting depth, and enclosure volumes not confirmed. Pull from the official Rockford Fosgate P2D2-12 datasheet before building or selecting an enclosure.
1-Ohm wiring caution: Confirm amplifier stability at 1-Ohm before using the parallel configuration.
Amplifier note: 400W RMS requires an amplifier rated at 400W RMS at the selected impedance. This is above the 300W rating of the T1000-1BDCP at 2-Ohm — confirm specific amplifier output at the intended load.
Pairs well with:
Rockford Fosgate T1500-1BDCP or T2500-1BDCP mono amplifiers — confirm RMS output matches 400W at the selected impedance
Frequently Asked Questions
What amplifier power does the P2D2-12 require?
400W RMS at the selected wiring impedance. This is 100W higher than the P2 10" models. Confirm your amplifier's CEA-2031 rated RMS output at 1-Ohm, 4-Ohm, or 2-Ohm (per coil) before purchasing.
What enclosure volume is recommended?
Enclosure volumes are not confirmed in the supplier data. Pull the official Rockford Fosgate P2D2-12 datasheet for sealed and vented recommendations.
What are the wiring options?
1-Ohm (parallel — confirm amplifier stability), 4-Ohm (series), or 2-Ohm per coil for bi-amplification.
Is a grille available?
The diamond-cut cast aluminium trim ring accommodates an optional grille insert. Confirm the compatible SKU with Rockford Fosgate.
What is the terminal type on the P2D2-12?
The features list states "nickel plated push terminals." The P2D4-10 spec table reveals "compression terminals" — a conflict across the P2 range. Confirm the correct terminal type with Rockford Fosgate, as this applies to all P2 subwoofer models simultaneously.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
12" 4-Ohm SVC Punch Subwoofer 250W RMS, Kevlar Fibre-Reinforced Paper Cone, VAST, Nomex® Voice Coil Collar, Extended Pole Piece, 10-AWG Nickel Push Terminals.
Product Overview
The Rockford Fosgate Punch P1S4-12 is a 12" 4-Ohm Single Voice Coil (SVC) subwoofer rated at 250W RMS the 4-Ohm variant of the 12" Punch P1 platform. Identical construction to the P1S2-12 with the sole difference being the 4-Ohm voice coil impedance, which suits a broader range of mono amplifiers than the 2-Ohm variant. Optimised for sealed and vented enclosures. Sold as an individual unit.
All confirmed Punch P1 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, 10-AWG nickel-plated push terminals, rubberized ABS trim ring with grille insert provision, and protective PVC textured magnet cover.
Key Specifications
Subwoofer size: 12 inch
Voice coil configuration: Single Voice Coil (SVC)
Impedance: 4-Ohm
Power handling (RMS): 250W (confirmed)
Peak power: Not specified — confirm with Rockford Fosgate
Surround technique: VAST (up to 25% increased cone area)
Sensitivity: Not specified — confirm with Rockford Fosgate
Frequency response: Not specified — confirm with Rockford Fosgate
Xmax: Not specified — confirm with Rockford Fosgate
Voice coil: High-temp, Nomex® reinforcement collar
Cone: Kevlar fibre-reinforced paper
Spider: Linear with embedded 16 AWG tinsel leads
Basket: StampCast with integrated spider venting
Pole piece: Extended
Backplate: Bumped and vented
Input terminals: 10-AWG nickel-plated push terminals
Trim ring: Rubberized ABS (grille insert compatible)
Magnet cover: Protective PVC textured
Enclosure compatibility: Sealed and vented ✓
Mounting depth: Not specified — confirm with Rockford Fosgate
Cutout diameter: Not specified — confirm with Rockford Fosgate
Sold as: Individual unit
Weight: Not specified — confirm with Rockford Fosgate
Warranty: Not specified — confirm with Rockford Fosgate
Features & Benefits
4-Ohm SVC — Broad Amplifier Compatibility — A 4-Ohm SVC presents a universally compatible load to most mono subwoofer amplifiers. Two P1S4-12 units in parallel = 2-Ohm; in series = 8-Ohm.
12" Cone — Larger cone area than the 10" P1 models for greater air movement, more bass output, and lower frequency extension.
250W RMS — Confirmed 250W RMS sustained power handling.
Kevlar Fibre-Reinforced Paper Cone — Kevlar reinforcement for improved stiffness and breakup resistance at high output levels, with paper's natural damping and low mass.
VAST — Up to 25% increased effective cone area for improved efficiency and output.
Nomex® Voice Coil Reinforcement Collar — Heat and mechanical reinforcement at the voice coil-to-cone junction.
Extended Pole Piece and Bumped Vented Backplate — Extended pole for increased Xmax; vented backplate eliminates air spring compression.
10-AWG Nickel-Plated Push Terminals — Heavier gauge for lower contact resistance at 250W.
StampCast Basket with Integrated Spider Venting — Motor cooling during operation.
Rubberized ABS Trim Ring / Grille Provision / PVC Magnet Cover — Clean installation finish with optional grille.
Sealed and Vented Compatible — Both enclosure types confirmed.
Technical Specs
Specification
Detail
Brand
Rockford Fosgate
Part Number
P1S4-12
Series
Punch P1
Subwoofer Size
12 inch
Voice Coil
Single Voice Coil (SVC)
Impedance
4-Ohm ✓
Power Handling (RMS)
250W ✓
Peak Power
Not specified
Surround Technique
VAST (up to 25% increased cone area) ✓
Sensitivity
Not specified
Frequency Response
Not specified
Xmax
Not specified
Voice Coil
High-Temp, Nomex® Collar ✓
Cone
Kevlar Fibre-Reinforced Paper ✓
Spider
Linear, Embedded 16 AWG Tinsel Leads
Basket
StampCast with Integrated Spider Venting
Pole Piece
Extended ✓
Backplate
Bumped and Vented ✓
Input Terminals
10-AWG Nickel-Plated Push Terminals ✓
Trim Ring
Rubberized ABS (Grille Insert Compatible) ✓
Magnet Cover
Protective PVC Textured ✓
Enclosure Type
Sealed and Vented ✓
Mounting Depth
Not specified
Cutout Diameter
Not specified
Sold As
Individual Unit
Weight
Not specified
Warranty
Not specified — confirm with Rockford Fosgate
Compatible With / Goes Well With
Suitable enclosure types:
Sealed — tight, accurate bass
Vented — higher efficiency at tuning frequency
Wiring:
4-Ohm SVC — single 4-Ohm load per unit
Two units in parallel = 2-Ohm; two units in series = 8-Ohm
Pairs well with:
Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers at 4-Ohm
Frequently Asked Questions
What is the difference between the P1S4-12 and P1S2-12?
Both are identical 12" Punch P1 subwoofers with the same 250W RMS rating and construction. The only difference is impedance: the P1S4-12 is 4-Ohm SVC, the P1S2-12 is 2-Ohm SVC. The 4-Ohm is compatible with a wider range of amplifiers; the 2-Ohm suits amplifiers that produce their maximum rated output at 2-Ohm.
What amplifier power is appropriate?
250W RMS at 4-Ohm. Confirm the amplifier's RMS output at 4-Ohm before purchasing.
What enclosure volume is recommended?
Not confirmed in the supplier data. Pull the official Rockford Fosgate P1S4-12 datasheet for sealed and vented volume recommendations.
Is a grille available?
The rubberized ABS trim ring accommodates an optional grille insert. Confirm the compatible grille SKU with Rockford Fosgate.
Does this subwoofer suit trucks as well as cars?
The supplier description confirms this model is designed for cars and trucks. The sealed and vented enclosure compatibility provides flexibility for the range of install locations common in both passenger vehicles and utes, vans, and trucks.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
