Rockford Fosgate T1D210 Power 10" T1 Dual 2-Ohm Subwoofer 600 Watts, VAST Technology, 1-Ohm Ready in 10" Product Overview The Rockford Fosgate T1D210 is a 10" dual 2-ohm voice coil subwoofer from the flagship Power T1 series, rated at 600 Watts RMS and 1200 Watts peak. The 1-ohm stable counterpart to the T1D410, the T1D210 carries the complete Power T1 technology package patented VAST cone technology, FlexFit die-cast aluminium basket, Kevlar fibre reinforced paper cone, Nomex-reinforced high-temp voice coil, and anodized aluminium construction in the most compact T1 driver size available, with dual 2-ohm voice coils that wire in parallel to a 1-ohm load for maximum power extraction from 1-ohm stable mono amplifiers. For builds where a 1-ohm stable high-output mono amplifier is already specified and a 10" driver format is preferred for enclosure efficiency or vehicle fitment, the T1D210 is the direct T1 choice. All construction, technology, and performance specifications are identical to the T1D410 the sole differentiator is voice coil impedance and the resulting wiring options. Grille and integral trim ring included. Key Specifications Driver size: 10" Voice coil configuration: Dual 2-ohm (DVC) Wiring options: 1 ohm (parallel) / 4 ohm (series) Power handling: 600W RMS / 1200W peak Technology: Patented VAST up to 25% increased cone surface area Basket: FlexFit rigid die-cast aluminium Cone: Kevlar fibre reinforced paper Voice coil former: Anodized aluminium with copper-clad aluminium wire Voice coil reinforcement: Spun-laced Nomex collar (high-temp) Dust cap: Anodized aluminium heat-sinking Input terminals: Proprietary 8 AWG insulated all-metal spring terminals Spiders: Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel leads: Periodic-stitched fatigue-resistant Grille: Included with integral trim ring Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Dual 2-ohm voice coils 1-ohm parallel or 4-ohm series wiring: The key differentiator from the T1D410. Wiring the dual 2-ohm coils in parallel presents a 1-ohm load extracting maximum rated power from 1-ohm stable mono amplifiers. Wired in series, it presents a 4-ohm load for specific bridged or multi-driver configurations. Choose the T1D210 when your amplifier is 1-ohm stable and 1-ohm wiring is the system target. Patented VAST technology up to 25% more cone surface area: VAST (Vertical Attach Surround Technique) repositions the surround attachment point to reclaim up to 25% of the cone area traditionally covered by the surround. In a 10" driver where piston area is at a premium, this technology is particularly impactful delivering meaningfully more output per watt and performing like a larger woofer from the same basket diameter. FlexFit rigid die-cast aluminium basket: Precision-cast for structural rigidity with installation geometry flexibility for custom fabrication and compact vehicle builds where standard basket angles create clearance issues. Ideal for Australian hatchbacks, sedans, and utes where enclosure space is at a premium. 600W RMS / 1200W peak power handling: Identical to the T1D410, the T1D210 handles 600W RMS continuously in a 10" format the most powerful 10" T1 option available from Rockford Fosgate, suited to high-performance builds where compact enclosure size and high power handling are both required. High-temp voice coil with spun-laced Nomex reinforcement collar: Nomex reinforcement at the critical former-to-cone junction prevents delamination under sustained 600W RMS, high-excursion use in compact sealed or ported enclosures where thermal stress is concentrated. Anodized aluminium voice coil former with copper-clad aluminium wire: Superior heat dissipation versus paper or plastic formers, critical for a 600W RMS 10" driver operating in a compact enclosure where heat accumulates more rapidly than in larger enclosure volumes. Copper-clad aluminium winding reduces moving mass, improving transient response and punch. Kevlar fibre reinforced paper cone: Stiffness and break-up resistance without excessive weight, maintaining accurate pistonic motion at the high excursion levels a 600W RMS 10" driver operates at. Anodized aluminium heat-sinking dust cap: Active heat sink drawing thermal energy away from the pole piece and voice coil gap during sustained high-power use directly contributing to long-term reliability in compact enclosure environments where heat management is critical. Optimised pole piece and spider venting: Internal air channels reduce compression behind the cone at high excursion levels, improving linearity and bass accuracy particularly beneficial in compact sealed enclosures where back-pressure management directly affects performance. Proprietary 8 AWG insulated all-metal spring input terminals: Heavy-gauge terminals consistent with the Power T1 range standard, appropriate for the high current demands of a 600W RMS, 1-ohm system. Symmetrical dual progressive roll poly-cotton spiders: Dual spider configuration provides linear restoring force symmetry, reducing harmonic distortion and maintaining voice coil alignment at high displacement levels. Periodic-stitched fatigue-resistant tinsel leads: Periodic stitching distributes flex stress along a longer lead length, extending fatigue life at the sustained high-excursion levels the T1D210 is designed for. Grille and integral trim ring included: Ships complete with protective grille and trim ring for a finished, professional installation appearance. Technical Specs Specification Detail SKU T1D210 Brand Rockford Fosgate Driver Size 10" Voice Coil Configuration Dual 2-ohm (DVC) Wiring Options 1 ohm (parallel) / 4 ohm (series) Power Handling 600W RMS / 1200W peak Technology Patented VAST up to 25% increased cone surface area Basket FlexFit rigid die-cast aluminium Cone Kevlar fibre reinforced paper Dust Cap Anodized aluminium heat-sinking Voice Coil Former Anodized aluminium Voice Coil Wire Copper-clad aluminium Voice Coil Reinforcement Spun-laced Nomex collar (high-temp) Spiders Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel Leads Periodic-stitched fatigue-resistant Input Terminals Proprietary 8 AWG insulated all-metal spring terminals Grille Included with integral trim ring Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 1 ohm (parallel wiring) rated at or near 600W RMS Mono amplifiers stable at 4 ohms (series wiring) for specific system configurations Rockford Fosgate Power T1 and T2 series mono amplifiers Compact sealed and ported enclosures designed for the T1D210 confirm recommended enclosure specifications with Rockford Fosgate documentation before building Rockford Fosgate 8 AWG and heavy-gauge wiring kits for high-current 1-ohm installations Rockford Fosgate RCA cables and signal processors for high-output system integration Australian vehicles where 10" driver diameter is preferred for compact enclosure fitment and a 1-ohm stable amplifier is in the system Frequently Asked Questions What is the difference between the T1D210 and T1D410? Both are 10" Power T1 subwoofers with identical 600W RMS power handling, VAST technology, FlexFit basket, and construction. The T1D210 has dual 2-ohm coils (1-ohm parallel / 4-ohm series), while the T1D410 has dual 4-ohm coils (2-ohm parallel / 8-ohm series). Choose the T1D210 for 1-ohm stable amplifier pairings; choose the T1D410 for 2-ohm stable amplifier pairings. What impedance does the T1D210 present to the amplifier? The T1D210 has dual 2-ohm voice coils. Wired in parallel, it presents a 1-ohm load the standard configuration for maximising power from a 1-ohm stable high-output mono amplifier. Wired in series, it presents a 4-ohm load. Confirm your amplifier's stable impedance rating before wiring. How does the T1D210 compare to the T1 12" and 15" models? The T1D210 shares the same full T1 technology stack as the T1D412, T1D215, and T1D415. The differences are driver size and power handling 10" at 600W RMS versus 12" at 800W RMS and 15" at 1000W RMS. Choose the T1D210 when a compact 10" format and 1-ohm amplifier pairing are both required. What enclosure does the T1D210 require? The T1D210 requires a custom or aftermarket enclosure. Rockford Fosgate publishes recommended sealed and ported enclosure specifications for the T1D210 confirm these with official documentation or a qualified installer before designing or building an enclosure. Does the T1D210 include a grille? Yes. The T1D210 ships with a grille and integral trim ring included, providing a finished, professional installation appearance without requiring a separately purchased grille. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6" Shallow 2-Way Power Series Coaxial 70W RMS, Pole-Mounted Aluminium Dome Tweeter, Carbon Fibre Composite Cone, ICC Crossover, Grilles Included. Product Overview The Rockford Fosgate Power T16 is a 6" 2-way coaxial speaker rated at 70W RMS a shallow-depth design confirmed in the supplier description, making it suitable for door panel locations where a standard-depth 6" speaker would not fit without modification. The kit includes grilles, adapter plates, integrated concealed crossovers, and mounting hardware. A key design feature of the T16 is the pole-mounted aluminium dome tweeter the tweeter is elevated above the woofer cone on a central post, providing better high-frequency dispersion and a wider sweet spot compared to a conventional flush-mounted tweeter. The carbon fibre and polypropylene injection-moulded composite cone and butyl rubber surround are consistent with the Power series platform. Full technical specifications mounting depth, impedance, sensitivity, frequency response, and crossover details are not provided in the supplier data. Key Specifications Speaker size: 6 inch (shallow design confirmed) Configuration: 2-way coaxial Power handling (RMS): 70W per speaker (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Mounting depth: Shallow (exact depth not specified — confirm with Rockford Fosgate) Tweeter: Aluminium dome, pole-mounted (size not specified — confirm with Rockford Fosgate) Tweeter suspension: Polyurethane Crossover: ICC (Integrated Concealed Crossover) — slope not confirmed Cone: Carbon fibre and polypropylene injection-moulded composite Surround: Butyl rubber Basket: FlexFit OEM adapter plate: Included Grilles: Included ✓ Mounting hardware: Included Sold as: Pair (2 speakers — confirmed in description) CEA-2031 compliant: Not stated — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Shallow Mounting Depth — The T16 is specifically described as a shallow-depth speaker, enabling installation in door panels and cavities where a standard-depth 6" speaker cannot be fitted without structural modification. The exact mounting depth is not confirmed in the supplier data — pull from the official Rockford Fosgate T16 datasheet before purchasing for any depth-constrained installation. 70W RMS Power Handling — 70W RMS is confirmed per speaker — the highest confirmed power rating among the 6" coaxial speakers in this catalogue, providing substantial headroom for amplified operation with Rockford Fosgate's T-series 4-channel amplifiers. Pole-Mounted Aluminium Dome Tweeter — The tweeter is mounted on a central pole elevated above the woofer cone rather than flush into the cone surface. This pole-mounted position improves high-frequency dispersion by removing the tweeter from the interference zone of the woofer cone face — producing a broader, more even off-axis treble spread and a wider listening sweet spot. The aluminium dome with polyurethane suspension delivers fast, detailed treble with controlled damping. Carbon Fibre and Polypropylene Composite Cone — The injection-moulded composite combines carbon fibre's high stiffness and low mass with polypropylene's moisture resistance. The result is a lighter, stiffer diaphragm than standard or mineral-filled polypropylene for more accurate midrange reproduction and improved transient response. ICC — Integrated Concealed Crossover — Crossover circuitry built into the tweeter assembly — no external crossover box required. Crossover slope and frequency are not confirmed for the T16 — pull from the official datasheet. FlexFit Basket with OEM Adapter Plate — Non-standard basket geometry for OEM mounting cavity compatibility, with an adapter plate for additional fitment positions. Butyl Rubber Surround — UV and heat-resistant synthetic rubber for long-term reliability in Australian vehicle conditions. Grilles and Hardware Included — Complete kit for a finished, ready-to-install factory replacement. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T16 Series Power Speaker Size 6 inch (shallow) Configuration 2-Way Coaxial Power Handling (RMS) 70W per speaker ✓ Peak Power Not specified — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Mounting Depth Shallow — exact depth not confirmed Tweeter Aluminium Dome, Pole-Mounted, Polyurethane Suspension Crossover ICC — slope not confirmed Cone Carbon Fibre & Polypropylene Composite Surround Butyl Rubber Basket FlexFit OEM Adapter Plate Included ✓ Grilles Included ✓ Mounting Hardware Included ✓ Sold As Pair (2 speakers) ✓ CEA-2031 Compliant Not confirmed Cutout Diameter Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Standard 6" round factory speaker positions with limited mounting depth clearance Additional positions with included OEM adapter plate Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer system for bass below the 6" driver's confirmed lower frequency limit (TBC) Frequently Asked Questions What does "shallow mounting depth" mean for the T16? Shallow mounting depth means the speaker extends less distance behind the mounting surface than a standard-depth 6" speaker. This is critical for door panel installations where the inner door structure, window mechanism, or other components limit the available space behind the speaker. The exact T16 mounting depth must be confirmed from the Rockford Fosgate datasheet before purchasing for any depth-constrained installation. What is a pole-mounted tweeter and what advantage does it provide? A pole-mounted tweeter is elevated above the woofer cone on a central post rather than being mounted flush into the cone surface. This positioning places the tweeter above the woofer's cone, improving high-frequency dispersion by removing the dome from the cone's acoustic interference zone — producing a wider, more even treble spread across the listening area compared to a flush-mounted tweeter. What technical specifications are confirmed for the T16? 70W RMS power handling, shallow mounting depth, pole-mounted aluminium dome tweeter with polyurethane suspension, carbon fibre composite cone, butyl rubber surround, FlexFit basket, ICC crossover, OEM adapter plate, grilles included, and sold as a pair are confirmed. Impedance, sensitivity, exact mounting depth, frequency response, and crossover specification must be pulled from the official Rockford Fosgate T16 datasheet before publishing. Are grilles included with the T16? Yes — the product description confirms grilles are included in the kit alongside adapter plates and mounting hardware. What adapter plate formats are included with the T16? The supplier description confirms adapter plates are included but does not specify the oval formats. Confirm the specific adapter plate formats with Rockford Fosgate or from the official T16 datasheet. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RCA Y-Adapter 1 Female to 2 Male, Twisted Pair, OFC, Platinum Ends, RFI/EMI Rejection, Frosted Shield. The Rockford Fosgate RFIY-1F is a twisted pair RCA Y-adapter 1 female to 2 male with woven outer shield, OFC (Oxygen-Free Copper) conductors, and platinum-plated ends. Used to split one RCA output to two RCA inputs, or to adapt a single-channel signal path for dual-amplifier or dual-subwoofer connection. The twisted pair construction provides RFI and EMI noise rejection; the split center pin ensures secure plug engagement. Key Specifications Specification Detail Part Number RFIY-1F Type RCA Y-Adapter Configuration 1 Female to 2 Male ✓ Conductor OFC (Oxygen-Free Copper) ✓ End Plating Platinum ✓ Design Twisted Pair ✓ Shield Woven outer, frosted finish ✓ Noise Rejection RFI and EMI ✓ Center Pin Split for secure connection ✓ Length Not specified Impedance Not specified Warranty Not specified Features & Benefits Twisted Pair Construction — RFI/EMI Rejection — The two signal conductors are twisted together, cancelling common-mode electromagnetic interference induced along the cable length. OFC Conductors — Oxygen-free copper resists oxidation for long-term low-resistance signal transfer. Platinum-Plated Ends — Corrosion-resistant contacts for reliable signal connection at the RCA interface. Split Center Pin — The split design of the male center pin expands slightly on insertion, maintaining a firm, low-resistance contact with the female RCA socket. Woven Frosted Outer Shield — Physical durability and additional EMI shielding with a flexible frosted finish. 1 Female to 2 Male — Splits one RCA female socket into two RCA male outputs for dual-destination signal routing. FAQs What is a 1 female to 2 male RCA Y-adapter used for? A 1F-to-2M Y-adapter takes one RCA output (e.g. a single subwoofer output on a head unit) and splits it to two RCA inputs — for connecting to two amplifiers, or for splitting a mono signal to two channels on a single amplifier. Does the twisted pair design reduce noise? Yes — twisting the conductor pair cancels common-mode interference, reducing hum and noise induced by the vehicle's electrical system or nearby wiring. What is a split center pin? The male RCA center pin has a longitudinal split that allows it to expand slightly when inserted into a female socket — creating spring tension for a secure, rattle-free connection. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Premium RCA Y-Adapter 1 Male to 2 Female, Dual Twist Design, 6-Cut Connector, OFC, Platinum Ends, Woven Shield. The Rockford Fosgate RFITY-1M is a premium 1-male-to-2-female RCA Y-adapter the upgraded counterpart to the standard RFIY-1M and the 1M-to-2F configuration of the RFITY-1F. Identical construction to the RFITY-1F: dual twist design for enhanced noise rejection, 6-cut connector with split center pin, OFC conductors, platinum-plated ends, and woven outer shield. Select the RFITY-1M when the split is needed at the destination input end rather than the source output end. Key Specifications Specification Detail Part Number RFITY-1M Type Premium RCA Y-Adapter Configuration 1 Male to 2 Female ✓ Conductor OFC ✓ End Plating Platinum ✓ Twist Design Dual Twist ✓ Connector 6-Cut + Split Center Pin ✓ Shield Woven outer ✓ Noise Rejection RFI and EMI ✓ Length Not specified Warranty Not specified FAQs What is the difference between RFITY-1M and RFITY-1F? Both are premium dual-twist, 6-cut connector Y-adapters with identical construction. Configuration only: RFITY-1M is 1 male to 2 female (splits at the cable plug end); RFITY-1F is 1 female to 2 male (splits at the socket/output end). What is the difference between RFITY-1M and RFIY-1M? The RFITY-1M is the premium version — dual twist design (vs single) and 6-cut connector (vs split pin only). Both are 1M-to-2F configuration. What does the 6-cut connector do? Six contact fingers press against the female socket wall simultaneously — distributing contact pressure for lower resistance and better vibration resistance than a 2-cut split pin. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6 Foot (1.8 Metre) Twisted Pair RCA Signal Cable OFC, Platinum Ends, RFI/EMI Rejection, Split Center Pin, Frosted Shield. The Rockford Fosgate RFI-6 is a 6-foot (1.8-metre) twisted pair RCA signal cable the shortest length in the RFI series. Same construction as the RFI-10, RFI-16, and RFI-20: OFC conductors, platinum-plated ends, twisted pair RFI/EMI rejection, split center pin, and frosted woven outer shield. At 1.8 metres, the RFI-6 suits very short runs amplifiers mounted close to the head unit, in-dash or under-seat installations, or secondary connection runs between components in the same location. Key Specifications Specification Detail Part Number RFI-6 Type RCA Signal Cable Length 6 feet (1.8 metres) ✓ Conductor OFC ✓ End Plating Platinum ✓ Design Twisted Pair ✓ Shield Woven, frosted ✓ Noise Rejection RFI and EMI ✓ Center Pin Split ✓ Channels Not confirmed Warranty Not confirmed — confirm with Rockford Fosgate (RFI-10 confirmed 1yr) Features & Benefits 6 Feet / 1.8 Metres — Short-Run Application — The shortest length in the RFI range — suited to under-seat amplifier installations, very compact vehicles, or secondary runs between adjacent components where longer cables would create excess slack. Twisted Pair RFI/EMI Rejection — Even over short runs, twisted pair construction reduces interference susceptibility. OFC Conductors + Platinum Ends — Full-spec signal cable regardless of length. Split Center Pin — Secure connection at both ends. FAQs How does the RFI-6 fit in the RFI range? The RFI series runs: RFI-6 (6ft / 1.8m), RFI-10 (10ft / 3m), RFI-16 (16ft / 4.8m), RFI-20 (20ft / 6m). All are identical in construction — select the length that matches your routing requirement. The RFI-6 is the shortest option for tight installations. Does the RFI-6 have a warranty? Not confirmed in the supplier data. The RFI-10 carries a confirmed 1-year warranty — confirm whether the same applies to the RFI-6 from the official product page. Is the cable stereo or mono? Not confirmed — confirm from the official Rockford Fosgate RFI-6 product page. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2S-1X10 Prime R2S 10" Shallow Loaded Enclosure Compact Fit, Real Bass Product Overview The Rockford Fosgate R2S-1X10 is a single 10" shallow loaded enclosure housing a Prime R2S shallow subwoofer (R2SD4-10), rated at 200 Watts RMS and 400 Watts peak, internally pre-wired to a 2-ohm load. The more compact sibling of the R2S-1X12, it delivers genuine Prime series bass performance from a slim-line wedge profile just 8.25 cm deep at the top and 13.34 cm at the base in a narrower 48.26 cm wide footprint suited to tighter behind-seat and under-seat spaces in Australian utes, single-cab trucks, and compact vehicles. Like the R2S-1X12, the R2S-1X10 is purpose-built for installations where depth and width are the critical constraints and budget is a consideration. The R2SD4-10 shallow driver is engineered specifically for reduced mounting depth, and the wedge enclosure geometry is optimised for single-cab truck and limited seat-travel installations. CEA-2031 compliant and constructed from 5/8" MDF with high-density carpet and 12 AWG quick-release compression terminals, the R2S-1X10 is a ready-to-install solution that requires only a power feed, ground, and audio signal to get running. Key Specifications Subwoofer: Single 10" Rockford Fosgate Prime R2S shallow (R2SD4-10) Power handling: 200W RMS / 400W peak Pre-wired impedance: 2 ohm (internally wired) Enclosure type: Shallow sealed wedge Construction: 5/8" MDF Finish: High-density carpet Input terminals: Up to 12 AWG quick-release compression Dimensions (H x W x D bottom x D top): 34.29 x 48.26 x 13.34 x 8.25 cm (wedge) Shipping weight: 9.02 kg CEA-2031 compliant Features & Benefits Ultra-slim wedge profile 8.25 cm at top, 13.34 cm at base: Engineered for the most space-restricted behind-seat and under-seat installations in Australian single-cab trucks, utes, and compact vehicles. The tapered wedge profile fits neatly behind seats with limited travel clearance where flat-bottomed or deeper enclosures will not. Narrower than the R2S-1X12: At 48.26 cm wide versus 69.53 cm for the R2S-1X12, the R2S-1X10 fits in installations where the 12" enclosure width is too great the same shallow wedge depth profile in a significantly more compact width for tighter spaces. Prime R2S shallow 10" driver (R2SD4-10): Specifically engineered for shallow mounting depth, not a standard driver forced into an undersized box. Delivers accurate, controlled bass output within the sealed shallow enclosure alignment it is designed for. 200W RMS / 400W peak power handling: Accessible power requirements suited to entry-level and mid-range mono amplifiers. Pre-wired to 2 ohms confirm your amplifier's 2-ohm power rating before purchase. Pre-wired to 2 ohms: Factory internal wiring presents a 2-ohm load to the amplifier. No internal wiring configuration required connect your amplifier to the 12 AWG compression terminals and go. Optimised wedge design for single-cab trucks and limited seat travel: The wedge geometry is specifically optimised for single-cab and restricted seat-travel installations, maximising internal enclosure volume within the minimum available depth a practical solution for Australian working utes and single-cab trucks. Lightest enclosure in the Rockford Fosgate shallow loaded range: At just 9.02 kg, the R2S-1X10 is the most manageable shallow loaded enclosure in this catalogue. Easy for a single person to handle, position, and install a practical advantage for DIY installs in tight spaces. CEA-2031 compliant: Power handling figures comply with the CEA-2031 standard for loaded subwoofer enclosures, providing a verified and comparable specification. 5/8" MDF construction: Rigid enclosure walls minimise panel flex and resonance at sustained 200W RMS input levels, ensuring consistent bass reproduction in the shallow sealed alignment. High-density carpet finish: Durable, professional appearance suited to daily under-seat and behind-seat use in Australian utes and trucks. 12 AWG quick-release compression terminals: Tool-free wiring connection and disconnection for clean installation and easy removal practical for ute and single-cab installs where the enclosure is occasionally removed. Prime series value positioning: Delivers Rockford Fosgate engineering and factory tuning at the accessible Prime series price point a genuine step up from generic shallow enclosures without the cost of the Punch P3S shallow range. Technical Specs Specification Detail SKU R2S-1X10 Brand Rockford Fosgate Subwoofer Driver 10" Rockford Fosgate Prime R2S shallow (R2SD4-10) Woofer Quantity 1 Power Handling 200W RMS / 400W peak Pre-Wired Impedance 2 ohm (internally wired) Enclosure Type Shallow sealed wedge Construction Material 5/8" MDF Finish High-density carpet Input Terminals Up to 12 AWG quick-release compression CEA-2031 Compliant Yes Dimensions (H x W x D bottom x D top) 34.29 x 48.26 x 13.34 x 8.25 cm (wedge) Shipping Weight 9.02 kg Warranty Confirm with supplier Compatible With Mono amplifiers stable at 2 ohms, rated at or near 200W RMS at 2 ohms Rockford Fosgate Prime and Punch series mono amplifiers Single-cab trucks and utes with behind-seat or under-seat depth and width restrictions Compact vehicles where the R2S-1X12 width (69.53 cm) is too large for the available space Vehicles requiring the most compact shallow loaded enclosure option in the Prime range Rockford Fosgate wiring kits for 2-ohm mono amplifier installation Rockford Fosgate RCA cables and signal accessories Frequently Asked Questions What amplifier does the R2S-1X10 require? The R2S-1X10 is pre-wired to 2 ohms and handles 200W RMS. A mono amplifier stable at 2 ohms and rated at or near 200W RMS at 2 ohms is recommended such as a compatible Rockford Fosgate Prime or Punch mono amplifier. Confirm your amplifier's 2-ohm rating before purchase. What is the difference between the R2S-1X10 and R2S-1X12? Both share the same shallow wedge depth profile (13.34 cm base, 8.25–8.26 cm top) and 2-ohm pre-wiring. The R2S-1X10 uses a 10" R2S driver rated at 200W RMS in a narrower 48.26 cm wide enclosure weighing 9.02 kg. The R2S-1X12 uses a 12" R2S driver rated at 250W RMS in a wider 69.53 cm enclosure weighing 11.15 kg. Choose the R2S-1X10 when width or weight is the tighter constraint. How shallow is the R2S-1X10 enclosure? The R2S-1X10 wedge profile is 13.34 cm deep at the base and 8.25 cm deep at the top, with an overall height of 34.29 cm and width of 48.26 cm. It is specifically optimised for single-cab trucks and utes where seat travel limits available mounting depth. How does the R2S-1X10 compare to the Punch P3S-1X10? Both are shallow sealed wedge enclosures for ute and truck installs. The P3S-1X10 uses a higher-pedigree Punch P3S shallow driver with 300W RMS power handling and 10 AWG terminals. The R2S-1X10 uses a Prime R2S shallow driver with 200W RMS and 12 AWG terminals making it the more budget-accessible shallow loaded 10" enclosure in the Rockford Fosgate range. Is the R2S-1X10 suitable for a DIY installation? Yes. At 9.02 kg with 12 AWG quick-release compression terminals, the R2S-1X10 is easy for a single person to handle and install. Connect power, ground, signal, and speaker wiring to a compatible 2-ohm mono amplifier and the system is ready to use without specialist tools or professional installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-500X4 Prime 500 Watt 4-Channel Full-Range Class-D Car Amplifier A 500W 4-channel Full-Range Class-D car amplifier delivering 125W x 4 at 2-ohm or 250W x 2 at 4-ohm bridged (CTA-2006 rated). Features independent front and rear channel crossover control with all-pass mode, 2/4 channel input selection switch, RCA pass-through outputs, C.L.E.A.N. gain calibration with per-channel output clip indicators, Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management. Designed and engineered in Tempe, Arizona. Backed by a 1 year warranty. Product Overview The Rockford Fosgate R2-500X4 is a 500W 4-channel Full-Range Class-D car amplifier from the Prime R2 series, purpose-built for powering car speaker pairs across the full audio spectrum. Rated continuous power is 75W x 4 at 4-ohm, 125W x 4 at 2-ohm, or 250W x 2 at 4-ohm bridged (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 90W x 4 at 4-ohm, 160W x 4 at 2-ohm, and 300W x 2 at 4-ohm bridged. The R2-500X4 provides independent front and rear channel crossover control, each with fully adjustable high-pass and low-pass filters at 12dB/octave Butterworth (50Hz-250Hz) and an all-pass mode for full-bandwidth output. Independent front and rear variable input gain adjustment is provided. A 2/4 channel input selection switch configures the amplifier for source units with either 2 or 4 RCA outputs, working for both RCA and high-level inputs. RCA pass-through outputs allow downstream amplifier chaining - the R2-750X1 monoblock subwoofer amplifier is the natural companion for a complete car audio system. Auto-Sense turn-on activates the amplifier when a speaker-level signal is detected, with a RAP bypass switch for Retained Accessory Power systems. C.L.E.A.N. provides separate input and output clip indicators for both front and rear channel groups. Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management are all active. Cast aluminium heatsink with convection cooling. Designed and engineered in Tempe, Arizona. Features & Benefits Full-Range Class-D - Efficient 4-Channel Car Audio Amplification: Full-Range Class-D topology delivers high-efficiency power across the complete 20Hz-20kHz audio spectrum, reducing current demand on the vehicle's electrical system while powering speaker pairs with clean, accurate output. Independent Front and Rear Crossover Control with All-Pass Mode: Front and rear channels each have independent high-pass and low-pass crossover controls at 12dB/octave Butterworth (50Hz-250Hz) plus an all-pass mode for full-bandwidth output, giving more flexibility than a single shared crossover. 2/4 Channel Input Selection Switch: The input selection switch configures the R2-500X4 to accept either a 2-channel or 4-channel RCA or high-level input, working with source units that have limited RCA output pairs without requiring Y-cables or signal splitting. Bridgeable to 2-Channel - 250W Mono per Pair: The R2-500X4 can be bridged to 2-channel, delivering 250W x 2 at 4-ohm (300W dynamic), suited to driving higher-power speaker pairs or running a compact 2-channel installation. RCA Pass-Through Outputs for Downstream Chaining: RCA pass-through outputs are active with both RCA and high-level input, allowing the signal to be passed to a downstream subwoofer amplifier such as the R2-750X1 without signal degradation. C.L.E.A.N. Technology - Independent Per-Channel Clip Monitoring: C.L.E.A.N. provides separate input and output clip indicator LEDs for both the front and rear channel groups, enabling accurate independent gain calibration across all four channels. Auto-Sense Turn-On with RAP Bypass: Auto-Sense activates the amplifier automatically when a high-level input signal is detected, removing the need for a dedicated remote turn-on wire. A bypass switch is included for vehicles with Retained Accessory Power systems. Rollback Protection and NOMAD Speaker Protection: Rollback Protection dynamically manages output to prevent thermal stress during sustained high-output conditions. NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. Technical Specs Specification Detail SKU R2-500X4 Number of Channels 4 Total Power 500W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 75W x 4 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 125W x 4 Rated Power - 4-ohm Bridged (CTA-2006) 250W x 2 Dynamic Power - 4-ohm (PowerCube) 90W x 4 Dynamic Power - 2-ohm (PowerCube) 160W x 4 Dynamic Power - 4-ohm Bridged (PowerCube) 300W x 2 Circuit Topology Full-Range Class-D Bridgeable Yes Frequency Response 20 Hz - 20 kHz THD + Noise Less than 1.0% at 4-ohm and 2-ohm Input Sensitivity Low-Level: 150mV - 4V / High-Level: 450mV - 12V Signal Input Front: 4 x RCA + 4-Pin Molex / Rear: 4 x RCA + 4-Pin Molex Input Selection 2/4 Channel Switch (RCA and High-Level) Signal Output 2 x RCA Pass-Thru (active with RCA or High-Level input) Tone Controls None Front High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Front Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth All-Pass Yes Remote Controls None Auto-Sense Turn-On Yes (with RAP bypass switch) Power Wire Gauge 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Cooling Convection Heatsink Cast Aluminium Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 80A Max Current Draw at 13.8V Sinewave 59A Visual Indicators Power: Blue / Protect: Red / C.L.E.A.N. In: Red / C.L.E.A.N. Out Front and Rear: Blue/Red Dimensions (H x W x D) 49 x 173 x 255mm (1.9 x 6.8 x 10.1 inch) CTA-2006 Compliant Yes Warranty 1 Year Compatible With / Goes Well With The R2-500X4 suits car audio builds requiring an efficient 4-channel full-range amplifier for speaker pairs at the Prime R2 price point. At 59A maximum current draw and an 80A fuse requirement, it places moderate demand on the vehicle's electrical system. The RCA pass-through output pairs naturally with the R2-750X1 mono subwoofer amplifier for a complete R2 series speaker and subwoofer system. Goes Well With: R2-750X1 - Companion R2 series 750W mono subwoofer amplifier, chainable via the R2-500X4's RCA pass-through outputs for a complete R2 series car audio system R2-750X5 - Alternative single-unit 5-channel R2 series amplifier for builds requiring an integrated subwoofer channel alongside speaker amplification R2-2X12 / R2-2X10 - Rockford Fosgate Prime dual loaded subwoofer enclosures when paired with the R2-750X1 companion monoblock RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the installation Frequently Asked Questions What is the difference between the R2-500X4 and the R2-750X5? The R2-500X4 is a 4-channel full-range amplifier rated at 125W x 4 at 2-ohm with no dedicated subwoofer channel, no Punch EQ, and no remote level control. The R2-750X5 is a 5-channel amplifier rated at 100W x 4 plus 350W subwoofer at 2-ohm, adding a dedicated subwoofer channel with Punch EQ, infrasonic filter, RLC remote level control, and a 2/4/5 channel input switch. Choose the R2-500X4 for a pure 4-channel speaker amplifier and pair it with the R2-750X1 for subwoofer duty; choose the R2-750X5 for a single-unit 5-channel solution. Can I add a subwoofer amplifier to a system using the R2-500X4? Yes. The R2-500X4 includes RCA pass-through outputs that are active with both RCA and high-level input, allowing a distortion-free signal to be passed to a downstream mono subwoofer amplifier such as the R2-750X1. The two amplifiers chain together cleanly for a complete 4-channel speaker plus mono subwoofer car audio system. What does the 2/4 channel input selection switch do? The input selection switch configures the R2-500X4 to accept either a 2-channel or 4-channel input from the source unit, working for both RCA and high-level connections. In 2-channel mode, the single stereo RCA pair feeds all four channels internally. In 4-channel mode, separate front and rear RCA pairs are used for independent left/right front and rear channel control. What fuse does the R2-500X4 require and is it included? The R2-500X4 requires an 80A fuse, which is not included and must be sourced separately. This is smaller than the 120A fuse required by the R2-750X5 and R2-750X1, reflecting the R2-500X4's lower maximum current draw of 59A. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Does the R2-500X4 need a dedicated remote turn-on wire? Not necessarily. Auto-Sense activates the amplifier automatically when a high-level speaker signal is detected at the input, removing the need for a separate remote wire in OEM integration scenarios. A RAP bypass switch is included for vehicles where the source unit continues to output a signal after the ignition is switched off.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-200X2 Prime 200 Watt 2-Channel Class D Amplifier When two channels need real power without compromise, the R2-200X2 delivers 200 watts of clean, efficient Class D performance engineered by Rockford Fosgate. Product Overview The R2-200X2 is part of Rockford Fosgate's 3rd generation Prime Series, built for car audio enthusiasts who demand reliable, high-performance amplification at an accessible price. Operating as a full-range Class D 2-channel amplifier, it runs at 4 ohm or 2 ohm stereo and 4 ohm bridged/mono, giving it the flexibility to drive a front speaker pair in stereo or bridge down to a single channel to power a subwoofer. Class D topology maximises efficiency and reduces the electrical load on the vehicle's charging system, while MEHSA 4 (Maximum Efficiency Heat Sink Application) actively reduces MOSFET temperatures, lowers distortion, and prolongs output device lifespan. The top-mounted control panel keeps all adjustments within easy reach, and CTA-2006 compliant power ratings confirm that the 200W output is a real, tested figure. Designed and engineered in Tempe, Arizona, the R2-200X2 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red) to accurately match the source unit's output to the amplifier's input sensitivity, eliminating guesswork and reducing distortion at the source. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. MEHSA 4 (Maximum Efficiency Heat Sink Application): Advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's outputs and protects against shorting speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. Fully Adjustable Butterworth Crossovers: 12 dB/octave High-Pass and Low-Pass crossovers, continuously variable from 50 to 250 Hz, with an All-Pass option for full-range output when no filtering is needed. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V), making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing a downstream amplifier to be added without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-200X2 Series Prime Number of Channels 2 Amplifier Class Class D, Full Range Total RMS Power 200W RMS Power @ 4 Ohm 50W x 2 RMS Power @ 2 Ohm 100W x 2 Bridged Power @ 4 Ohm 200W x 1 Dynamic Power @ 4 Ohm 60W x 2 Dynamic Power @ 2 Ohm 107W x 2 Dynamic Power Bridged @ 4 Ohm 215W x 1 Bridgeable Yes Minimum Impedance (Stereo) 2 Ohm Minimum Impedance (Bridged) 4 Ohm Frequency Response 20 Hz - 20 kHz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input 2 x RCA low-level, 4-Pin Molex high-level Signal Output 2 x RCA pass-through (active with RCA or high-level input) Crossover High-Pass / Low-Pass: 50-250 Hz @ 12 dB/octave Butterworth All-Pass Yes Tone Controls No Remote Controls No Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT (Blue/Red) Operating Voltage 9-16V DC Max Current Draw (13.8V Sinewave) 18A Recommended Fuse 30A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 8.1" (4.9 cm x 17.3 cm x 20.5 cm) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-200X2 pairs naturally with Rockford Fosgate Prime Series full-range speakers such as the R165X3, R168X2, R169X2, and R169X3 for a front stereo speaker setup. When bridged to mono at 4 ohms, it can also serve as a dedicated subwoofer channel, making it a compact single-amplifier solution for smaller builds. For systems requiring both speaker and dedicated subwoofer amplification, the R2-200X2 pairs directly with the R2-250X1 monoblock using the onboard RCA pass-through. A 4-gauge amplifier wiring kit is required for power and ground runs, and 8-gauge cable is needed for speaker outputs. Frequently Asked Questions Can the R2-200X2 power both front speakers and a subwoofer at the same time? Not simultaneously through both channels. In stereo mode, the R2-200X2 powers two speakers independently. When bridged to mono, it delivers 200 watts into a single 4-ohm load, suitable for a subwoofer, but the stereo channels are no longer available in that configuration. For a system requiring both speaker and subwoofer amplification, pairing the R2-200X2 with a dedicated monoblock such as the R2-250X1 is the recommended approach. Does the R2-200X2 require a remote turn-on wire? When using RCA inputs, a remote turn-on wire must be connected to the head unit's remote output. When using high-level speaker inputs, the Auto-Sense bypass switch can be enabled to allow the amplifier to detect an incoming signal and power on automatically, making it compatible with factory head units and systems that lack a dedicated remote output, including those with Retained Accessory Power (RAP). What does the NOMAD protection system do? NOMAD is a real-time analogue computer built into the R2-200X2 that continuously monitors the amplifier's speaker outputs. It protects the amplifier from damage caused by shorted speaker wires and dangerously low speaker impedances, providing active, dynamic protection rather than relying solely on a fuse. What gauge power, ground, and speaker wire does the R2-200X2 require? Rockford Fosgate specifies 4 AWG for power and ground runs using the onboard compression terminal block connectors. Speaker output connections require 8 AWG wire. The recommended 30A fuse is not included in the box and must be sourced separately, installed as close to the battery as possible. Can the R2-200X2 be bridged into a 2-ohm load for maximum power? No. When bridging the R2-200X2, the minimum supported impedance is 4 ohms. Running a bridged output into a 2-ohm load is not supported and risks amplifier failure or NOMAD-triggered protection shutdown. In standard stereo mode, the minimum impedance per channel is 2 ohms. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" P3S Shallow 4-Ohm DVC 300W RMS, 83dB, 42Hz Fs, 89mm Depth, 230mm Cutout. Confirmed Enclosure Volumes: 14.1L Sealed, 28.3L Vented. Product Overview The Rockford Fosgate Punch P3SD4-10 is a 10" 4-Ohm Dual Voice Coil (DVC) shallow subwoofer rated at 300W RMS (600W peak) the most completely specified P3S model in the supplier data. The full specification set includes 83dB sensitivity, 42Hz free-air resonance, 8.1mm Xmax, 89mm (3.50") mounting depth, 230mm (9.06") cutout diameter, and Rockford Fosgate's confirmed enclosure recommendations: 0.5 cu ft (14.1 litres) sealed, 1.0 cu ft (28.3 litres) vented. CEA-2031 compliant. Input terminals are confirmed Dual 10-AWG compression consistent with the P3D2-10 and P2D4-10 spec tables, and confirming that "push terminals" in P3S features lists is a supplier data error. The 4-Ohm DVC provides wiring options of 2-Ohm (parallel), 8-Ohm (series), or 4-Ohm per coil for bi-amplification no 1-Ohm stability requirement. All confirmed P3S construction applies: anodised aluminium cone and dustcap, M-Roll Santoprene surround, dual linear spider, StampCast basket with spider venting, and diamond-cut cast aluminium trim ring. Key Specifications Subwoofer size: 10 inch (shallow) Voice coil configuration: Dual Voice Coil (DVC) Impedance: 4-Ohm per coil (2-Ohm parallel / 8-Ohm series / 4-Ohm biamp) Power handling (RMS): 300W ✓ (CEA-2031) Power handling (peak): 600W ✓ Sensitivity (SPL): 83dB @ 1W/1M ✓ Free-air resonance (Fs): 42Hz ✓ Xmax: 8.1mm ✓ Mounting depth: 3.50" (89mm) ✓ Cutout diameter: 9.06" (230mm) ✓ Voice coil diameter: 2.5" (65.5mm) ✓ Magnet weight: 47 oz (1.32 kg) ✓ Effective piston area (Sd): 333 cm² ✓ Equivalent air volume (Vas): 14.3 litres ✓ Total Q (Qts): 0.78 ✓ Electrical Q (Qes): 0.90 ✓ Mechanical Q (Qms): 6.00 ✓ Voice coil inductance (Le): 4.3 mH ✓ DC resistance (Re): 6.80 Ohms ✓ Woofer displacement: 0.074 cu ft (2.1 litres) ✓ Recommended sealed enclosure: 0.5 cu ft (14.1L) ✓ Recommended vented enclosure: 1.0 cu ft (28.3L) ✓ Shipping weight: 11.9 lbs (5.39 kg) ✓ CEA-2031 compliant: Yes ✓ Input terminals: Dual 10-AWG compression ✓ Cone: Anodised aluminium ✓ Dustcap: Anodised aluminium ✓ Surround: M-Roll Santoprene ✓ Spider: Dual linear with embedded 16 AWG tinsel leads ✓ Basket: StampCast with integrated spider venting ✓ Trim ring: Diamond-cut cast aluminium (grille insert compatible) ✓ Motor assembly: Shallow ✓ Enclosure compatibility: Sealed and vented ✓ Sold as: Individual unit Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 300W RMS / 600W Peak — CEA-2031 — 300W RMS confirmed to the CEA-2031 standard — the same sustained power as the P3SD2-10, delivered in the 4-Ohm impedance format. 89mm Mounting Depth — Confirmed — At 3.50" (89mm), the P3SD4-10's mounting depth is confirmed. This is significantly shallower than the standard P3D2-10 (156.8mm) — making the P3SD4-10 suitable for shallow enclosures, rear doors with limited depth, or under-seat installations that the full-depth P3 cannot fit. 230mm Cutout Diameter — The confirmed 9.06" (230mm) cutout is slightly smaller than the standard 10" P3 (232mm) — check baffle dimensions against this confirmed figure. Confirmed Enclosure Volumes: Sealed: 0.5 cu ft (14.1 litres) Vented: 1.0 cu ft (28.3 litres) 83dB Sensitivity — The 83dB @ 1W/1M is slightly lower than the standard P3D4-10 (from the P3D2-10's 82dB reference), consistent with the shallow motor's Fs of 42Hz and Qts of 0.78. 42Hz Free-Air Resonance (Fs) — The Fs of 42Hz is higher than full-depth P3 subwoofers (P3D2-10: 26.6Hz), reflecting the shallow motor's stiffer suspension. This affects the enclosure design: the sealed box resonance will be higher than full-depth drivers in the same volume. 8.1mm Xmax — 8.1mm of linear peak excursion — less than the 15.2mm of the full-depth P3D2-10, consistent with the shallow motor's reduced excursion range. Qts = 0.78 — The higher Qts (versus 0.49 for the full-depth P3D2-10) is characteristic of shallow motor designs. At 0.78, the driver is well-suited to the 14.1L sealed box recommendation; the vented alignment at 28.3L provides additional output at bass frequencies above the port tuning point. 4-Ohm DVC — Broad Amplifier Compatibility: 2-Ohm (parallel): Most common configuration 8-Ohm (series): For amplifiers with higher minimum impedance 4-Ohm per coil (biamp): Separate channels Compression Terminals Confirmed — The spec table confirms Dual 10-AWG compression — the correct terminal type across the P2/P3/P3S range. Update all P3S features list descriptions accordingly. Anodised Aluminium Cone, M-Roll Santoprene Surround — P3S platform materials confirmed. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P3SD4-10 Series Punch P3S (Shallow) Subwoofer Size 10 inch (shallow) Voice Coil Dual Voice Coil (DVC) Impedance per Coil 4-Ohm ✓ Wiring Options 2-Ohm (parallel) / 8-Ohm (series) / 4-Ohm biamp ✓ Power Handling (RMS) 300W ✓ (CEA-2031) Power Handling (Peak) 600W ✓ Sensitivity 83dB @ 1W/1M ✓ Fs 42Hz ✓ Xmax 8.1mm ✓ Cutout Diameter 9.06" (230mm) ✓ Mounting Depth 3.50" (89mm) ✓ Voice Coil Diameter 2.5" (65.5mm) ✓ Magnet Weight 47 oz (1.32 kg) ✓ Sd 333 cm² ✓ Vas 14.3 litres ✓ Qts 0.78 ✓ Qes 0.90 ✓ Qms 6.00 ✓ Le 4.3 mH ✓ Re 6.80 Ohms ✓ Woofer Displacement 0.074 cu ft / 2.1L ✓ Sealed Enclosure (Vb) 0.5 cu ft (14.1L) ✓ Vented Enclosure (Vb) 1.0 cu ft (28.3L) ✓ Shipping Weight 11.9 lbs (5.39 kg) ✓ CEA-2031 Compliant Yes ✓ Input Terminals Dual 10-AWG Compression ✓ Cone Anodised Aluminium ✓ Dustcap Anodised Aluminium ✓ Surround M-Roll Santoprene ✓ Spider Dual Linear, Embedded 16 AWG Tinsel Leads ✓ Basket StampCast with Integrated Spider Venting ✓ Motor Shallow ✓ Trim Ring Diamond-Cut Cast Aluminium (Grille Compatible) ✓ Enclosure Type Sealed and Vented ✓ Sold As Individual Unit Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Confirmed enclosure volumes: Sealed: 0.5 cu ft (14.1 litres) net internal Vented: 1.0 cu ft (28.3 litres) net internal — confirm port dimensions from Rockford Fosgate Wiring: 2-Ohm → parallel 8-Ohm → series 4-Ohm per coil → biamp Pairs well with: A mono amplifier rated at 300W RMS at 2-Ohm A shallow sealed 14.1L or vented 28.3L enclosure Weight 5.39 kg (11.9 lbs) Frequently Asked Questions What are the confirmed enclosure volumes for the P3SD4-10? Sealed: 0.5 cu ft (14.1 litres); Vented: 1.0 cu ft (28.3 litres). Both are Rockford Fosgate's official confirmed recommendations. Confirm vented port dimensions from the official P3SD4-10 installation guide. Why is the Fs of the P3SD4-10 higher than a full-depth subwoofer? An Fs of 42Hz reflects the shallow motor's stiffer suspension — required to control the cone within a reduced excursion range. Full-depth subwoofers with long-travel motors have lower Fs values (e.g. the P3D2-10 at 26.6Hz) because their suspensions are more compliant over a greater travel distance. The higher Fs means the P3SD4-10's useful bass extension begins at a higher frequency than full-depth drivers. What is the confirmed mounting depth? 89mm (3.50") — confirmed in the specification table. What does the 230mm cutout mean for enclosure building? A 9.06" (230mm) cutout is required in the baffle. This is 2mm smaller than the standard 232mm cutout on the full-depth P3D4-10 and P2D4-10 — a meaningful difference if using a pre-drilled enclosure. Confirm the exact cutout before purchase. Are the terminals push or compression? The specification table confirms Dual 10-AWG compression terminals — the correct type across the P2, P3, and P3S range. The "push terminals" language in features lists is a consistent supplier data error. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Small chassis. Full range. Punch power for sub or centre channel builds. Product Overview The Rockford Fosgate P300X1 is a 300W mono amplifier from the Punch series, built around a compact chassis capable of fitting where conventional amplifiers cannot. Unlike dedicated subwoofer-only mono amplifiers, the P300X1 features a full-range frequency response making it equally suited to powering a dedicated subwoofer system or a single centre channel speaker. Whether you're running one driver or multiple speakers off a single channel, the 2-ohm capable design delivers 300W of Punch-series output with headroom to spare. The P300X1 is a feature-rich unit for its class. The built-in C.L.E.A.N. setup system simplifies gain calibration, reducing the risk of clipping and distortion from a poorly set amplifier. High-level inputs with an Auto Turn-On circuit allow direct integration with factory head units without requiring a dedicated remote turn-on wire. RCA pass-through outputs enable daisy-chaining to additional amplifiers, and the stealth top-mounted control panel keeps all adjustments accessible without removing the amplifier from its install location. An optional PLC2 remote Punch Level Control (sold separately) connects to add driver-accessible output adjustment and an input clip indicator for real-time gain monitoring. Key Specifications Channels: 1 (mono) Output power: 300W @ 2 ohms (power at other impedances — not specified) Frequency response: Full-range (exact Hz range — not specified) Circuit topology: Not specified Crossover: 12dB/octave Butterworth (frequency range — not specified) Punch EQ: +18dB boost @ 45Hz (see Red-flags) Signal input: High level with Auto Turn-On Signal output: RCA pass-through Remote control: Optional PLC2 (not included — sold separately) Clip indicator: Yes (active when PLC2 is connected) Control panel: Top-mounted (stealth) Setup system: C.L.E.A.N. Input sensitivity: Not specified Nominal impedance load: Not specified CEA compliance: Not specified in provided data Power wire gauge: Not specified Speaker wire gauge: Not specified Operating voltage: Not specified Recommended fuse: Not specified Dimensions: Not specified Features & Benefits Full-Range Frequency Response — Sub or Centre Channel — Most compact mono amplifiers are subwoofer-only units with a fixed low-pass filter. The P300X1's full-range response opens up a second use case: powering a dedicated centre channel speaker in a vehicle with a more complex audio setup. One amplifier, two legitimate applications. C.L.E.A.N. Setup System — Rockford Fosgate's C.L.E.A.N. (Clean Level Efficient Amplifier Noise) setup process uses an on-board indicator to guide accurate gain calibration between the head unit and amplifier. Setting gain by ear or by eye is a common cause of distortion and clipping — C.L.E.A.N. removes the guesswork, protecting your speakers and ensuring the amplifier performs to its rated output without distortion. High-Level Input with Auto Turn-On — The P300X1 accepts high-level speaker wire inputs from factory or OEM head units and powers on automatically when it detects signal — no remote turn-on wire required. This significantly simplifies integration with factory audio systems, particularly in vehicles where accessing the head unit remote output is difficult or impractical. On-Board Punch EQ (+18dB @ 45Hz) — A bass boost centred at 45Hz is available directly from the amplifier, allowing low-end tuning without an external equaliser. The +18dB figure is sourced from the supplier features list — refer to Red-flags below for an important note on this specification. Optional PLC2 Remote Level Control with Clip Indicator — The P300X1 is wired ready for the optional Rockford Fosgate PLC2 remote level control (sold separately). When connected, the PLC2 adds driver-accessible output adjustment and activates an input clip indicator — a LED that warns when the incoming signal is clipping before it reaches the amplifier. This combination helps protect speakers and ensures clean output at all listening levels. RCA Pass-Through Outputs — Signal can be chained to a second amplifier via the RCA pass-through outputs, enabling clean multi-amp builds without splitters or Y-adaptors. Useful in systems running the P300X1 on a centre channel or sub with a separate amplifier on front and rear speakers. Stealth Top-Mounted Control Panel — All controls — gain, crossover, EQ — are located on the top surface of the amplifier rather than on the endplate. This allows access to adjustments after installation in boot floors, under-seat locations, or tight enclosures without the need to remove or reposition the unit. Compact Chassis — The P300X1 is specifically designed to fit installation locations where a conventional amplifier will not physically fit. Exact dimensions are not specified in supplier-provided data — confirm with Rockford Fosgate before planning a space-critical install. Muted Turn-On + Full Protection Circuit — Muted turn-on prevents startup thumps that can stress tweeters and subwoofer cones. Over-current and short-circuit protection safeguard the amplifier and connected drivers during fault conditions. Technical Specs Specification Detail Channels 1 (mono) Output power 300W @ 2Ω Power by impedance Not specified Frequency response Full-range (Hz range not specified) Circuit topology Not specified Crossover type 12dB/octave Butterworth Crossover frequency range Not specified Punch EQ +18dB @ 45Hz (unverified — see Red-flags) Signal input High level (auto turn-on) Signal output RCA pass-through Setup system C.L.E.A.N. Remote control Optional PLC2 (sold separately) Clip indicator Yes (when PLC2 connected) Control panel Top-mounted (stealth) Turn-on method Auto (from high-level input signal) Muted turn-on Yes Protection Over-current / Short circuit Input sensitivity Not specified CEA compliance Not specified Power wire gauge Not specified Speaker wire gauge Not specified Operating voltage Not specified Recommended fuse Not specified Dimensions Not specified Weight 4.3 kg Compatible With / Goes Well With The P300X1 is confirmed for the following applications based on manufacturer-provided information: Dedicated subwoofer systems (single driver or multiple speakers on one channel) Dedicated centre channel speaker amplification (full-range frequency response confirmed) 2-ohm subwoofer or speaker loads (300W RMS — power at other impedances not confirmed) Factory head units without RCA outputs (via high-level Auto Turn-On input) Goes well with: Rockford Fosgate Punch series subwoofers or centre channel drivers rated to 300W Rockford Fosgate PLC2 Remote Punch Level Control (optional — sold separately) Factory head units or OEM audio systems (via high-level auto turn-on) Aftermarket head units with RCA preamp outputs Frequently Asked Questions Can the P300X1 power a centre channel speaker as well as a subwoofer? Yes. Unlike most compact mono amplifiers, the P300X1 features a full-range frequency response — making it suitable for a dedicated centre channel speaker or a subwoofer system. The exact frequency range is not confirmed in the provided data; verify with Rockford Fosgate for your specific application. What is the C.L.E.A.N. setup system? C.L.E.A.N. is Rockford Fosgate's on-board gain calibration system. It uses an indicator to guide correct gain matching between the head unit and amplifier, preventing clipping and distortion that commonly results from gain set too high — protecting speakers and maximising clean output. Is the Punch Level Control included with the P300X1? No. The PLC2 remote Punch Level Control is an optional accessory and is sold separately. The P300X1 is wired and ready to accept the PLC2, and when connected it adds driver-accessible level control and an active input clip indicator. Does the Auto Turn-On circuit require a remote wire from the head unit? No. The high-level Auto Turn-On circuit powers the amplifier when it detects signal at the speaker-level inputs — no dedicated remote turn-on wire is needed. This simplifies installation with factory head units where accessing the remote output is difficult. Can I chain another amplifier off the P300X1? Yes. RCA pass-through outputs allow signal to be routed to a second amplifier cleanly, without splitters or Y-adaptors. This is useful in systems running the P300X1 alongside a separate full-range or multichannel amplifier. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P300-8P Punch 8" 300 Watt Powered Vented Enclosure When space is the deciding factor but bass cannot be left behind, the P300-8P packs a high-output 8" woofer and 300-watt Class D amplifier into a slim vented enclosure suited for trucks and small car applications alike. Product Overview The P300-8P is Rockford Fosgate's compact all-in-one powered subwoofer enclosure, designed for installations where a 10" or 12" powered enclosure will not fit but genuine low-end performance is still required. The slim vented MDF enclosure houses an 8" proprietary woofer impedance-optimised for the integrated 300-watt Class D amplifier in a closed-loop design, ensuring the driver and amplifier work together as a matched system from the factory. The vented slot-port enclosure extends low-frequency output down to 30 Hz, delivering powerful bass reproduction from a compact footprint. An onboard variable Low-Pass crossover (50-200 Hz), Bass EQ with 0 to +12 dB of boost, and a 0-180 degree phase switch are accessible on the amplifier plate, while the included Punch Level Control remote handles bass adjustment from the driver's seat. An intelligent auto turn-on/off circuit with three selectable modes (Remote Trigger, DC Offset Sense, and Audio Sense) eliminates the need for a dedicated remote turn-on wire in OEM installations. Separate RCA and high-level speaker inputs make it compatible with both aftermarket and factory head units. Quick-release input connectors allow the enclosure to be removed when space is needed. The heat-activated vinyl finish resists marks and scuffs in daily use. CEA-2006 (amplifier) and CEA-2031 (woofer) compliant, Klippel verified, with a 1-year warranty. Features & Benefits 300-Watt Class D Amplifier with Closed-Loop Design: The integrated amplifier is an impedance-matched, closed-loop Class D design tuned specifically for the P300-8P's proprietary 8" woofer, ensuring maximum efficiency and precise driver control at all output levels within the compact enclosure footprint. High-Efficiency, Low Current Amplifier Design: The Class D amplifier topology keeps current consumption low relative to output, making the P300-8P compatible with stock electrical systems in trucks and small vehicles where alternator capacity has not been upgraded. Vented Enclosure for Extended Low-Frequency Output: The slot-port vented enclosure extends bass reproduction down to 30 Hz, providing powerful low-frequency output from an 8" driver in a slim footprint, suited to both truck under-seat and small car boot installations. Slim Design for Truck and Small Car Applications: The compact enclosure dimensions make the P300-8P well suited to tight installation locations, including truck under-seat positions and the limited boot spaces of sub-compact and small hatchback vehicles. Klippel Verified Woofer: The 8" proprietary woofer has been verified through the Klippel certification programme, which measures and corrects non-linear distortion parameters to deliver the best possible transient accuracy and low-frequency output from a compact, impedance-matched driver. Intelligent Auto Turn-On/Off: Three selectable turn-on modes (Remote Trigger, DC Offset Sense, and Audio Sense) allow the P300-8P to power on automatically in any installation scenario, including factory head units without a dedicated remote output. Variable Low-Pass Crossover: Continuously variable from 50 to 200 Hz at 12 dB/octave Butterworth, the onboard crossover integrates cleanly with full-range speakers across virtually any crossover point set by the main system amplifier or head unit. Onboard Bass EQ: 0 to +12 dB of onboard bass boost corrects for acoustic deficiencies in the vehicle interior and adds presence to the low-frequency output without an external equaliser. Phase Switch: A 0 to 180 degree phase control allows the subwoofer to be time-aligned with the main speakers acoustically, compensating for physical placement differences for a coherent, integrated bass response. Included Punch Level Control Remote: The Punch Level Control is included in the box, allowing bass output to be adjusted from the driver's seat in real time without accessing the amplifier plate directly. Quick-Release Input Connections: Input connections use quick-disconnect fittings, allowing the enclosure to be removed from the vehicle quickly when cargo or passenger space is needed, without tools or cable work. High and Low-Level Inputs: Separate RCA (low-level, 150mV-6V) and speaker-level (high-level, 300mV-12V) inputs via a single RCA pair summed L/R support both aftermarket and OEM head unit installations from the same unit. Thermal and Over/Under Voltage Protection: Onboard protection monitors both operating temperature and supply voltage, shutting the amplifier down safely before damage occurs under fault conditions. Precision MDF Enclosure with Vinyl Finish: Constructed from 5/8" Medium Density Fiberboard for optimal acoustic properties, covered with a heat-activated vinyl finish that resists marks and scuffs in daily use. CEA-2006 and CEA-2031 Compliant: Amplifier power ratings conform to CEA-2006 industry standards at 14.4V with 1% or less THD. Woofer power handling conforms to CEA-2031, confirming both ratings are real, tested figures. Technical Specs Specification Detail SKU P300-8P Series Punch Woofer Size 8" Woofer Quantity 1 Woofer Series Proprietary Power Handling 300W RMS Integrated Amplifier 300W RMS Amplifier Class Class D Enclosure Type Vented Enclosure Material 5/8" MDF Enclosure Finish Heat-Activated Vinyl Frequency Response 30 Hz - 200 Hz Low-Pass Crossover Variable 50-200 Hz @ 12 dB/octave Butterworth Bass EQ 0 to +12 dB Phase Control 0 to 180 degrees Input Switch High-Level (Speaker) / Low-Level (RCA) Signal Input 1 x RCA Pair (L/R Summed) Input Sensitivity (Low-Level) 150 mV - 6V Input Sensitivity (High-Level) 300 mV - 12V Input Impedance 20k Ohms Auto Turn-On Selector Remote Trigger / DC Offset Sense / Audio Sense Remote Control Punch Level Control (included) Visual Indicators POWER / PROTECT LED Heatsink Type Extruded Aluminium Cooling Convection Power Wire Gauge 8 AWG (B+/GND), 18 AWG (Remote) Power Input Connector Quick Disconnect Fuses 20A total (2 x 10A ATO) Compliance CEA-2006 (amplifier), CEA-2031 (woofer), Klippel Verified Dimensions (H x W x D) 11.4" x 17.6" x 5.6" (289 mm x 448 mm x 141 mm) Shipping Weight 19 lbs (8.6 kg) Warranty 1 Year Goes Well With The P300-8P is a standalone bass solution requiring no separate subwoofer amplifier or enclosure. For factory head unit installations, the high-level speaker inputs and Audio Sense auto turn-on allow direct connection without additional interface hardware. For aftermarket head unit installations, the RCA input connects directly from the head unit's subwoofer pre-out. To complement the P300-8P with front and rear speaker amplification, the PBR400X4D or R2-200X2 pair naturally via a standard RCA pre-out from the head unit. For installations in trucks where a larger driver is preferred and space allows, the P300-10T or P300-12T are direct step-up options in the same powered truck enclosure range. An 8-gauge power and ground cable run to the battery is required, along with the 2 x 10A ATO fuses included in the box. Frequently Asked Questions How does the P300-8P differ from the P300-10T and P300-12T? All three are 300-watt powered enclosures sharing the same amplifier specification, feature set, and installation approach. The P300-8P uses an 8" vented enclosure with a frequency response from 30 Hz and the smallest physical footprint, making it the right choice for the tightest installation spaces in small cars and trucks. The P300-10T and P300-12T use sealed enclosures with 10" and 12" drivers respectively, each in progressively larger wedge-profile enclosures suited to larger truck under-seat locations where more space is available. Why does the P300-8P use a vented enclosure while the P300-10T and P300-12T are sealed? The vented design allows the 8" driver to produce extended low-frequency output down to 30 Hz, matching the low-end reach of the larger sealed 10" and 12" enclosures despite the smaller driver size. The port tuning compensates for the reduced cone area of the 8" woofer, delivering strong bass output from a notably more compact enclosure footprint. Can the P300-8P be connected directly to a factory head unit? Yes. The high-level speaker inputs accept signal from the factory head unit's speaker outputs directly, and the Audio Sense or DC Offset Sense auto turn-on modes allow the enclosure to power on without a dedicated remote turn-on wire. This makes the P300-8P a straightforward plug-in bass upgrade for OEM systems without requiring head unit replacement. What are the three auto turn-on modes, and which should I use? Remote Trigger mode powers the amplifier on when a 12V signal is received at the remote input terminal, requiring a remote turn-on wire from the head unit. DC Offset Sense mode detects a DC voltage change on the high-level speaker input to trigger turn-on, suitable for OEM systems where the speaker output changes state when the head unit powers on. Audio Sense mode detects an incoming audio signal and triggers turn-on automatically, making it the most universal option for both OEM and aftermarket installations without a dedicated remote output. What is Klippel Verification, and why does it matter for a compact powered enclosure? Klippel is an independent speaker measurement and certification programme that identifies and corrects non-linear distortion parameters in speaker drivers, including suspension non-linearities and motor force variation across the cone's travel range. In a compact powered enclosure where the driver and amplifier are a matched system and the 8" cone is working hard to deliver 30 Hz output, Klippel verification confirms that the woofer's performance envelope has been accurately measured and optimised to deliver clean, low-distortion bass at the rated 300 watts across its full operating range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate P300-10 Punch 10" 300W Amplified Subwoofer All-In-One Bass, Compact Footprint Product Overview The Rockford Fosgate P300-10 is a complete all-in-one amplified subwoofer system, combining a proprietary Punch 10" high-output woofer, a 300 Watt internal amplifier, and a custom sealed enclosure in a single self-contained unit. A step down in size from the P300-12 but identical in power handling, the P300-10 is the choice for builds where a slightly more compact footprint is needed without sacrificing output ideal for smaller boot spaces, hatchbacks, and vehicles where the 12" version simply won't fit. Like its 12" sibling, the P300-10 requires only a power feed, ground, and audio signal to operate no separate amplifier, no separate enclosure, and no component matching required. The closed-loop design ensures the woofer, amplifier, and enclosure are engineered and tuned together as a matched system. A built-in adjustable bass boost EQ, adjustable 12 dB/octave low-pass crossover, 0°/180° phase switch, intelligent auto turn-on, and an included remote bass level control give you complete system management straight out of the box in virtually any Australian vehicle. Key Specifications Subwoofer: 10" Rockford Fosgate Punch proprietary high-output woofer Amplifier: Internal 300W Enclosure type: Sealed (custom closed-loop) Construction: 5/8" MDF Finish: Industrial heat-activated vinyl Crossover: Adjustable 12 dB/octave low-pass Phase switch: 0°/180° Inputs: Low-level RCA and speaker-level Auto turn-on: Intelligent auto turn-on/off Remote bass control: Included Protection: Thermal and over/under voltage Features & Benefits All-in-one amplified subwoofer system: Woofer, amplifier, and sealed enclosure in a single unit. No separate amplifier purchase, no enclosure building, and no impedance matching required. The most straightforward bass upgrade path for factory systems and space-restricted installs in Australian hatchbacks, sedans, and SUVs. 300W internal amplifier with closed-loop design: Matched and tuned by Rockford Fosgate engineers to the specific 10" driver and sealed enclosure, ensuring consistent optimised performance without the guesswork of pairing separate components. The same 300W power handling as the P300-12 in a more compact 10" package. Compact 10" driver for tighter spaces: The P300-10 delivers the same amplifier output as the P300-12 in a smaller enclosure footprint the choice when boot dimensions, seat clearance, or vehicle size rules out the larger 12" version without compromising on power. Proprietary high-output Punch woofer: The 10" driver is purpose-engineered for this specific sealed enclosure and power level, delivering the punchy, controlled bass response the Punch series is built on across a wide range of music genres. Adjustable 12 dB/octave low-pass crossover: Match the crossover point to your existing speaker system for clean frequency integration, ensuring the subwoofer handles only the bass frequencies it is designed for. Built-in adjustable bass boost EQ: Dial in additional low-frequency emphasis without an external equaliser, compensating for the natural bass roll-off common in hatchbacks and acoustically compact vehicle interiors. 0°/180° phase switch: Align the subwoofer's output phase with your main speakers for coherent, integrated bass reproduction, particularly important when the subwoofer is mounted in a different location to the main speakers. Separate low-level (RCA) and speaker-level inputs: Connects to aftermarket head units via RCA or directly to factory speaker outputs via speaker-level inputs. No head unit replacement required for factory system integration in Australian vehicles. Intelligent auto turn-on/off: Senses the audio signal and powers on and off automatically no remote turn-on wire required, simplifying installation in OEM audio systems common in Australian vehicles. Remote bass level control included: Adjust bass output from the driver's seat without accessing the subwoofer. Included in the box with no additional purchase needed. Thermal and over/under voltage protection: Built-in protection circuits monitor operating temperature and supply voltage, shutting the system down safely before damage can occur important in the high boot temperatures typical of Australian summers. Detachable power/ground connector: Simplifies installation and clean removal. Practical for vehicles where the subwoofer may need to be temporarily removed or transferred. 5/8" MDF construction with industrial heat-activated vinyl: Rigid walls minimise enclosure flex and resonance at high output levels. The heat-activated vinyl finish is more durable and scratch-resistant than carpet, better suited to daily cargo area and boot use. High-efficiency, low current design: Draws less current from the vehicle's electrical system than a comparable traditional amplifier and subwoofer combination important for Australian vehicles running factory electrical systems without upgrades. Technical Specs Specification Detail SKU P300-10 Brand Rockford Fosgate Subwoofer Driver 10" Rockford Fosgate Punch proprietary high-output woofer Internal Amplifier 300W Enclosure Type Sealed (closed-loop) Construction Material 5/8" MDF Finish Industrial heat-activated vinyl Crossover Adjustable 12 dB/octave low-pass Bass Boost EQ Built-in adjustable Phase Switch 0° / 180° Signal Inputs Low-level RCA + speaker-level Auto Turn-On Intelligent auto turn-on/off Power/Ground Connector Detachable Input Terminals Large AWG Remote Bass Control Included Protection Thermal + over/under voltage Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Factory (OEM) head units via speaker-level inputs and intelligent auto turn-on Aftermarket head units via low-level RCA inputs and remote turn-on Hatchbacks, sedans, and small SUVs with compact boot spaces where the P300-12 footprint is too large Vehicles requiring a complete self-contained bass solution without a separate amplifier Utes and dual-cab trucks with under-seat or behind-seat mounting where 10" enclosure depth fits Rockford Fosgate RCA cables and wiring accessories for signal connection Frequently Asked Questions What is the difference between the P300-10 and P300-12? Both the P300-10 and P300-12 feature a 300W internal amplifier and identical feature sets. The key difference is driver size the P300-10 uses a 10" woofer in a more compact enclosure, making it the better choice when boot or cargo space rules out the larger P300-12 footprint. Do I need a separate amplifier to run the P300-10? No. The P300-10 has a 300W amplifier built directly into the enclosure. Connect power, ground, and an audio signal from your head unit or factory system and it is ready to use straight out of the box. Can the P300-10 connect directly to a factory head unit? Yes. The P300-10 features separate speaker-level inputs for direct connection to factory head unit speaker outputs, and an intelligent auto turn-on that senses the audio signal no remote wire or aftermarket head unit required. Is a remote bass control included with the P300-10? Yes. A remote bass level control is included in the box, allowing driver's seat adjustment of bass output without accessing the subwoofer unit no additional purchase required. Is the P300-10 suitable for daily boot and cargo area use in Australian conditions? Yes. The industrial heat-activated vinyl finish resists scrapes and bumps, the 5/8" MDF construction minimises resonance, and the built-in thermal and over/under voltage protection safeguards the system against high boot temperatures common in Australian vehicles during summer. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less