ECE Approved Stop/Tail/Indicator/Reflector Lamp Horizontal/Vertical Mount, 4-Pin Harness Compatible Product Overview The LED Autolamps 149BARM4P is a rear combination lamp covering stop, tail, indicator, and reflector functions in a single 150mm x 80mm x 29mm unit. Mounting flexibility is a standout feature it can be installed in either horizontal or vertical orientation to suit a wide range of trailer and truck body panel layouts. The 4P suffix indicates compatibility with LED Autolamps' 4-pin plug harness system on select cable configurations refer to the LED Autolamps cable systems range or contact F.A.E. to confirm harness compatibility for your application. ECE approved and rated IP67. Features & Benefits Horizontal and vertical mount options — flexible orientation suits a wide range of trailer and truck body panel layouts without additional hardware Stop, tail, indicator, and reflector in one lamp — four functions in a single compact unit, reducing wiring complexity 4-pin plug harness compatible — on select cable system configurations, the 149BARM4P plugs directly into LED Autolamps' 4-pin harness system; confirm compatible part numbers with F.A.E. ECE approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V — compatible with 12V and 24V vehicle electrical systems Technical Specs Specification Detail SKU 149BARM4P Lamp Type Stop / Tail / Indicator / Reflector Voltage Range 12V / 24V Dimensions 150mm x 80mm x 29mm Mounting Horizontal or vertical surface mount Connector 4-pin plug (harness compatible on select variants) Protection Rating IP67 Compliance ECE Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring flexible-mount rear combination lamps LED Autolamps 4-pin cable harness systems (confirm compatible part numbers with F.A.E.) 12V and 24V vehicle electrical systems LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 149BARM4P approved for road use in Australia? Yes. The 149BARM4P is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia. What mounting orientations are available for the 149BARM4P? The 149BARM4P can be mounted in either horizontal or vertical orientation, giving installation flexibility to suit different trailer and truck body panel layouts. What does the 4-pin harness compatibility mean? On certain cable system configurations, the 149BARM4P is compatible with LED Autolamps' 4-pin plug harness system, allowing plug-and-play installation without cutting or splicing wires. Contact F.A.E. to confirm which cable system part numbers are compatible with your setup. What is the IP rating on the 149BARM4P? The 149BARM4P is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 149BARM4P carry? Warranty information was not confirmed in available supplier data — contact F.A.E. or LED Autolamps to confirm before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Front Marker Lamp with Clip-In Lens Clear, IP67, 5-Year Warranty Product Overview The LED Autolamps 1458WM is a 12/24V front marker lamp with a clear lens, designed for surface mounting on trailers, trucks, and commercial vehicles. Measuring 74mm x 38mm, the clip-in lens design allows for lens replacement without removing the full unit a practical advantage for reducing maintenance time and cost in the field. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Clip-in lens design — lens can be replaced independently without removing the full lamp housing, reducing maintenance costs and downtime Clear lens — clean appearance when inactive; the marker light colour is produced by the LEDs when the lamp is energised ADR road approved — meets Australian Design Rules for legal on-road use as a front marker lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 1458WM Lamp Type Front Marker Lens Colour Clear Voltage Range 12V / 24V Length 74mm Width 38mm Lens Clip-in replaceable Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Weight 0.3 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring front marker lamps 12V light vehicles and 24V heavy transport applications Trailer and truck body builds requiring ADR-approved front marker lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 1458WM approved for road use in Australia? Yes. The LED Autolamps 1458WM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a front marker lamp. What does the clip-in lens design mean for maintenance? The lens clips out independently, allowing it to be replaced without removing the full lamp unit from the mounting surface — saving time and cost during field maintenance. What colour does the 1458WM emit? The lens is clear when inactive. The marker light output colour is produced by the LEDs when the lamp is energised — confirm the LED colour with F.A.E. or LED Autolamps as this is not specified in available supplier data. What is the IP rating on the 1458WM? The 1458WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 1458WM carry? The 1458WM is backed by a 5-year warranty from LED Autolamps. Weight 0.3 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Red LED Side Marker Lamp with Clip-In Clear Lens IP67, 5-Year Warranty Product Overview The LED Autolamps 1458RM is a 12/24V red LED side marker lamp sharing the same 74mm x 38mm clip-in lens form factor as the 1458WM front marker lamp. The clear lens allows the red LED output to show cleanly when the lamp is active, while appearing clear and unobtrusive when inactive. The clip-in lens design allows for lens replacement without removing the full lamp unit. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Red LED output — delivers correct red side marker output for rear lateral visibility on trailers and commercial vehicles Clip-in lens design — lens can be replaced independently without removing the full lamp housing, reducing maintenance costs and downtime Clear lens — clean appearance when inactive; red LED output activates when the lamp is energised ADR road approved — meets Australian Design Rules for legal on-road use as a side marker lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 1458RM Lamp Type Side Marker LED Colour Red Lens Colour Clear Voltage Range 12V / 24V Length 74mm Width 38mm Lens Clip-in replaceable Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Weight 0.3 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring red side marker lamps 12V light vehicles and 24V heavy transport applications Trailer and truck body builds requiring ADR-approved side marker lighting LED Autolamps 1458WM front marker lamp (same 74x38mm clip-in form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 1458RM approved for road use in Australia? Yes. The LED Autolamps 1458RM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a side marker lamp. What does the clip-in lens design mean for maintenance? The lens clips out independently, allowing it to be replaced without removing the full lamp unit from the mounting surface — saving time and reducing cost during field maintenance. Why does the 1458RM have a clear lens if it outputs red? The clear lens gives the lamp a clean, unobtrusive appearance when inactive. The red output is produced by the LEDs behind the clear lens when the lamp is energised — confirm exact LED and lens configuration with F.A.E. or LED Autolamps before ordering. What is the IP rating on the 1458RM? The 1458RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 1458RM carry? The 1458RM is backed by a 5-year warranty from LED Autolamps. Weight 0.3 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 24V Front Indicator and Position Lamp Surface Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 135CAT124 is a 24V front indicator and position lamp in the same compact 135mm x 38mm x 24mm rectangular form factor as the 135RM and 135WM. Designed for surface mounting on trucks, trailers, and commercial vehicles requiring a 24V front indicator and position light combination, it delivers ADR-approved dual-function output in a single low-profile unit. Rated IP67 and backed by a 5-year warranty. Features & Benefits Front indicator and position light combined — two front lighting functions in a single surface-mount unit, simplifying installation Surface mount — straightforward installation on trailer and truck body front panels ADR road approved — meets Australian Design Rules for legal on-road use as a front indicator and position lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V compatible — designed primarily for 24V heavy transport applications 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 135CAT124 Lamp Type Front Indicator / Position Voltage Range 12V / 24V Dimensions 135mm x 38mm x 24mm Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring 24V front indicator and position lighting 12V and 24V vehicle electrical systems LED Autolamps 135RM stop/tail lamp (same 135 series form factor) LED Autolamps 135WM reverse lamp (same 135 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 135CAT124 approved for road use in Australia? Yes. The LED Autolamps 135CAT124 is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a front indicator and position lamp. What functions does the 135CAT124 cover? It combines front indicator and position light functions in a single surface-mount unit, reducing the number of fittings required on truck and trailer front panels. How does the 135CAT124 fit with other 135 series lamps? The 135CAT124 shares the same 135mm x 38mm x 24mm form factor as the 135RM stop/tail and 135WM reverse lamps, making it a natural match for a consistent lamp style across the full vehicle. What is the IP rating on the 135CAT124? The 135CAT124 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor and transport applications. What warranty does the 135CAT124 carry? The 135CAT124 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Front Direction Indicator with 18 Square LEDs Surface Mount, IP67 Product Overview The LED Autolamps 135CAT1 is a 12V front direction indicator and position lamp fitted with 18 square LEDs, in the compact rectangular 135 series form factor. Pre-wired and designed for surface mounting on trucks, trailers, and light commercial vehicles, it delivers ADR-approved front indicator output certified under CRN39340. Rated IP67 and drawing 0.4A, it's the 12V counterpart to the 135CAT124. Features & Benefits 18 square LEDs — distinctive square LED array delivers strong, consistent amber front indicator output Pre-wired surface mount — ready to connect and mount straight out of the blister pack ADR road approved — certified under CRN39340 for legal on-road use as a front direction indicator and position lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems 0.4A current draw — efficient operation suitable for multi-lamp front lighting builds Technical Specs Specification Detail SKU 135CAT1 Lamp Type Front Direction Indicator / Position LED Configuration 18 square LEDs Voltage 12V Current Draw 0.4A Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR — CRN39340 Weight 0.1 kg Compatible With / Goes Well With Trucks, trailers, and light commercial vehicles requiring 12V front direction indicator lamps Trailer builds requiring ADR-approved front indicator lighting LED Autolamps 135CAT124 front indicator/position lamp (24V equivalent) LED Autolamps 135RM stop/tail lamp (same 135 series form factor) LED Autolamps 135WM reverse lamp (same 135 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 135CAT1 approved for road use in Australia? Yes. The 135CAT1 is ADR approved under CRN39340, meeting Australian Design Rules requirements for legal on-road use as a front direction indicator and position lamp. How does the 135CAT1 differ from the 135CAT124? The 135CAT1 is a 12V-only lamp with 18 square LEDs and a confirmed CRN approval number, while the 135CAT124 is the 24V-designated variant. Both share the same 135 series rectangular form factor. What makes the square LED array distinctive? The 18 square LEDs produce a uniform, evenly spaced pattern across the lamp face — giving the 135CAT1 a recognisable appearance compared to standard round LED arrays. What is the IP rating on the 135CAT1? The 135CAT1 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor and transport applications. What warranty does the 135CAT1 carry? Warranty information was not confirmed in available supplier data — contact F.A.E. or LED Autolamps to confirm before purchasing. Weight 0.1 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 8 Square LED Rear Indicator Lamp Black Base, Pre-Wired, IP67, 5-Year Warranty Product Overview The LED Autolamps 135AM is a 12/24V rear indicator lamp fitted with 8 square LEDs in a black base housing, pre-wired for surface mounting on trailers, trucks, and commercial vehicles. Sharing the same 135 series rectangular form factor as the 135RM stop/tail and 135WM reverse lamps, it delivers ADR-approved rear indicator output certified under CRN39845 and ADR CTA060176. Drawing 0.2A and rated IP67, backed by a 5-year warranty. Features & Benefits 8 square LEDs — distinctive square LED array delivers consistent amber rear indicator output matching the 135RM's visual style Pre-wired surface mount — ready to connect and mount straight out of the blister pack ADR road approved — certified under CRN39845 and ADR CTA060176 for legal on-road use as a rear indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Black base — matches the 135RM and 135WM for a uniform rear lighting appearance Low current draw — 0.2A for efficient operation in multi-lamp trailer builds 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 135AM Lamp Type Rear Indicator LED Configuration 8 square LEDs Voltage Range 12V / 24V Current Draw 0.2A Housing Colour Black Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR — CRN39845 / CTA060176 Packaging Blister pack Warranty 5 years Weight 0.2 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring rectangular surface-mount rear indicator lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear indicator lighting LED Autolamps 135RM stop/tail lamp (same 135 series form factor) LED Autolamps 135WM reverse lamp (same 135 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 135AM approved for road use in Australia? Yes. The 135AM is ADR approved under CRN39845 and CTA060176, meeting Australian Design Rules requirements for legal on-road use as a rear indicator lamp. How does the 135AM complete the 135 series rear lighting set? The 135AM is the rear indicator lamp in the 135 series, complementing the 135RM stop/tail and 135WM reverse lamps — all sharing the same rectangular black base form factor for a consistent rear lighting appearance. What makes the square LED array distinctive? The 8 square LEDs produce a distinctive, evenly spaced pattern across the lamp face that visually matches the 135RM stop/tail, giving the rear lighting set a cohesive, uniform look. What is the IP rating on the 135AM? The 135AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 135AM carry? The 135AM is backed by a 5-year warranty from LED Autolamps. Weight 0.2 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/CTA Approved 12/24V White LED Reverse Lamp Recessed Fitting, 5-Year Warranty Product Overview The LED Autolamps 134WMB is a 12/24V white LED reverse lamp designed for recessed fitting on trailers, trucks, and commercial vehicles. Approved under ECE and CTA060269, it is supplied in polybag bulk packaging suited to installers and fleet operators fitting multiple vehicles. Backed by a 5-year warranty. Features & Benefits White LED output — delivers clear white reverse light output for improved visibility when reversing Recessed fitting — designed for flush panel installation on trailer and truck bodies ECE and CTA060269 approved — meets international and Australian road approval standards for legal on-road use as a reverse lamp 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Bulk polybag packaging — suited to installers and fleet operators fitting multiple vehicles 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 134WMB Lamp Type Reverse LED Colour White Voltage Range 12V – 24V Mounting Recessed Approval ECE, CTA060269 Packaging Polybag (bulk) Warranty 5 years Weight 0.101 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed reverse lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE/CTA-approved reverse lighting LED Autolamps 134AMB and 134AMG indicator lamps (same 134 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 134WMB approved for road use in Australia? Yes. The 134WMB is approved under ECE and CTA060269, meeting international and Australian road approval standards for legal on-road use as a reverse lamp. What does bulk polybag packaging mean? The 134WMB is supplied in polybag bulk packaging rather than individual blister packs, making it cost-effective for installers and fleet operators fitting multiple vehicles at once. How does the 134WMB fit with the 134 series lamps? The 134WMB is the reverse lamp in the 134 series, complementing the 134AMB and 134AMG indicator lamps and 134RMB and 134RMG stop/tail lamps in the same recessed lamp family. What is the voltage range of the 134WMB? It operates across 12V to 24V, making it compatible with light vehicles as well as 24V heavy transport applications without any modification. What warranty does the 134WMB carry? The 134WMB is backed by a 5-year warranty from LED Autolamps. Weight 0.101 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 9–32V Stop/Tail Lamp with Grommet and Plug Low-Profile Recessed Mount, IP67 Product Overview The LED Autolamps 134RMG is a 9–32V LED stop/tail lamp with grommet and plug, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 133mm x 160mm x 12mm, it's the grommet-equipped counterpart to the 134RMB supplied in a blister pack with everything needed for a complete, sealed recessed installation. Its wide 9–32V operating range extends beyond standard 12/24V lamps. ECE approved, IP67 rated, and backed by a 5-year warranty. Pairs with the 134AMG indicator lamp for a matched grommet-mount rear lighting set. Features & Benefits Grommet and plug included — complete sealed installation kit for a weatherproof recessed fit straight out of the blister pack Wide voltage range 9–32V — compatible with 12V, 24V, and other electrical systems up to 32V Low-profile recessed mount — 12mm depth sits flush with the panel for a clean, integrated finish ECE approved — meets international road approval standards for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 134RMG Lamp Type Stop / Tail Voltage Range 9V – 32V Dimensions 133mm x 160mm x 12mm Included Accessories Grommet, plug Mounting Low-profile recessed Protection Rating IP67 Compliance ECE Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed stop/tail lamps with grommet and wider voltage compatibility 12V, 24V, and up to 32V vehicle and equipment electrical systems Trailer builds requiring ECE-approved stop/tail lighting LED Autolamps 134RMB stop/tail lamp (same series, without grommet) LED Autolamps 134AMG indicator lamp with grommet (same series) LED Autolamps 133RMG stop/tail lamp with grommet (12/24V equivalent) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 134RMG approved for road use in Australia? Yes. The 134RMG is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as a stop/tail lamp. What is the difference between the 134RMG and the 134RMB? The 134RMG includes a grommet and plug for a complete, sealed recessed installation, while the 134RMB is available in bulk pack without these accessories. Both are ECE-approved 9–32V stop/tail lamps in the same form factor. How does the 134RMG differ from the 133RMG? The 134RMG operates across 9–32V versus the 133RMG's 12/24V range, making it more versatile for electrical systems outside standard voltage bands. Both share the same 133mm x 160mm x 12mm form factor. What is the IP rating on the 134RMG? The 134RMG is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 134RMG carry? The 134RMG is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 9–32V Stop/Tail Lamp Low-Profile Recessed Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 134RMB is a 9–32V LED stop/tail lamp designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 133mm x 160mm x 12mm, its wide 9–32V operating range makes it suitable for a broader range of vehicle and equipment electrical systems beyond standard 12/24V applications. ECE approved and rated IP67, the blister pack version includes a grommet and plug for a sealed installation. Available in bulk pack format, backed by a 5-year warranty. The stop/tail companion to the 134AMB indicator lamp. Features & Benefits Wide voltage range 9–32V — compatible with 12V, 24V, and other electrical systems up to 32V Low-profile recessed mount — 12mm depth sits flush with the panel for a clean, integrated finish on trailer and truck body panels ECE approved — meets international road approval standards for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Blister pack with grommet/plug available — sealed installation kit option; also available in bulk pack 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 134RMB Lamp Type Stop / Tail Voltage Range 9V – 32V Dimensions 133mm x 160mm x 12mm Mounting Low-profile recessed Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed stop/tail lamps with wider voltage compatibility 12V, 24V, and up to 32V vehicle and equipment electrical systems Trailer builds requiring ECE-approved stop/tail lighting LED Autolamps 134AMB indicator lamp (same 134 series form factor) LED Autolamps 133RMB stop/tail lamp (12/24V equivalent) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 134RMB approved for road use in Australia? Yes. The 134RMB is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as a stop/tail lamp. How does the 134RMB differ from the 133RMB stop/tail lamp? The 134RMB has a wider voltage range of 9–32V compared to the 133RMB's 12/24V, making it compatible with a broader range of electrical systems where supply voltage may vary above standard 24V. Is the 134RMB available with a grommet and plug? Yes. The blister pack version includes a grommet and plug for a complete, sealed recessed installation. A bulk pack version is also available — confirm packaging preference with F.A.E. before ordering. What is the IP rating on the 134RMB? The 134RMB is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 134RMB carry? The 134RMB is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 9–32V Indicator Lamp Low-Profile Recessed Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 134AMB is a 9–32V LED indicator lamp designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 133mm x 160mm x 12mm, its wide voltage range of 9–32V extends beyond standard 12/24V lamps making it compatible with a broader range of vehicle and equipment electrical systems. ECE approved and rated IP67, the blister pack version includes a grommet and plug for a sealed installation. Available in bulk pack format, backed by a 5-year warranty. Features & Benefits Wide voltage range 9–32V — broader operating range than standard 12/24V lamps; compatible with 12V, 24V, and other electrical systems up to 32V Low-profile recessed mount — 12mm depth sits flush with the panel for a clean, integrated finish on trailer and truck body panels ECE approved — meets international road approval standards for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Blister pack with grommet/plug available — sealed installation kit option; also available in bulk pack 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 134AMB Lamp Type Indicator Voltage Range 9V – 32V Dimensions 133mm x 160mm x 12mm Mounting Low-profile recessed Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed indicator lamps with wider voltage compatibility 12V, 24V, and up to 32V vehicle and equipment electrical systems Trailer builds requiring ECE-approved indicator lighting LED Autolamps 133AMB indicator lamp (similar series, 12/24V) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 134AMB approved for road use in Australia? Yes. The 134AMB is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as an indicator lamp. How does the 134AMB differ from the 133AMB indicator lamp? The 134AMB has a wider voltage range of 9–32V compared to the 133AMB's 12/24V, making it compatible with a broader range of vehicle and equipment electrical systems — particularly useful where supply voltage may vary above standard 24V. Is the 134AMB available with a grommet and plug? Yes. The blister pack version includes a grommet and plug for a complete, sealed recessed installation. A bulk pack version is also available — confirm packaging preference with F.A.E. before ordering. What is the IP rating on the 134AMB? The 134AMB is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 134AMB carry? The 134AMB is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less