Rockford Fosgate T2S2-16 Power 16" T2 Single 2-Ohm Subwoofer 16 Inches, Ground-Up Engineering, Built for Serious Output Product Overview The Rockford Fosgate T2S2-16 is a 16" single 2-ohm subwoofer from the Power T2 series, featuring 16 inches of effective radiating cone area and purpose-designed ground-up engineering developed to out-perform its predecessors in every measurable dimension. Not a parts-bin driver the T2S2-16 was designed from scratch by one of the leading loudspeaker engineers in the world, incorporating dealer and enthusiast feedback to produce a larger, more capable, and more comprehensively specified 16" subwoofer than anything preceding it in the T2 lineage. The T2S2-16 is built around a triple stack segmented ferrite motor structure a high-force motor architecture that delivers exceptional linearity across the full excursion range. Dual Nomex progressive spiders manage the cone travel demands of a 16" driver, while the integrated aluminium heat-sinking shorting ring (IDHS) provides both inductive linearisation and active thermal management for sustained high-power use. The three-layer glass fibre/Aramid honeycomb/glass fibre composite cone, injection-moulded foam surround with VAST technology, proprietary surround mechanical clamping ring, aluminium die-cast basket with integrated heat sink fins, and custom 8 AWG push spring terminals complete a 16" driver built without compromise. A detachable die-cast aluminium trim ring is included. Installation note: this driver is exceptionally heavy two-person installation is strongly recommended. Key Specifications Driver size: 16" Voice coil configuration: Single 2-ohm Motor structure: Triple stack segmented ferrite Voice coil: Single layer edge wound aluminium 4" Cone: Three-layer glass fibre / Aramid honeycomb / glass fibre composite Dust cap: Aluminium Surround: Injection-moulded foam with VAST technology Surround retention: Proprietary mechanical clamping ring Spiders: Dual Nomex progressive with integrated lead wires Basket: Aluminium die-cast with integrated heat sink fins Shorting ring: Integrated aluminium heat-sinking (IDHS) Pole piece: Vented Input terminals: Custom push spring insulated 8 AWG Trim ring: Detachable die-cast aluminium (included) Power handling: Confirm with supplier Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits 16" effective radiating cone area ground-up engineered for serious output: At 16 inches, the T2S2-16 delivers substantially more cone surface area than a 12" or 15" driver, moving proportionally more air per unit of excursion. Designed from the ground up by a leading loudspeaker engineer not assembled from existing components to deliver a clear performance step above the T2 series predecessors. Triple stack segmented ferrite motor structure: Three stacked ferrite magnet segments provide a powerful, high-force motor assembly with exceptional linearity across the full excursion range. The segmented architecture reduces eddy current losses and inductance variation compared to a solid single-magnet ferrite motor, contributing to lower distortion and more accurate bass reproduction at high output levels. Integrated aluminium heat-sinking shorting ring (IDHS): The aluminium shorting ring performs two functions simultaneously: it reduces inductance variation across the excursion range (improving linearity and reducing distortion), and it acts as a heat sink to draw thermal energy away from the voice coil gap during sustained high-power use. A critical reliability feature for a driver designed for sustained high-output operation. Single layer edge wound aluminium 4" voice coil: Edge winding positions the aluminium ribbon flat against the former with no air gaps between turns the most thermally efficient winding method, allowing heat from high-power input to transfer rapidly to the former and dissipate. The 4" diameter provides a large surface area for heat dissipation and a long winding length for high motor force. Three-layer glass fibre/Aramid honeycomb/glass fibre composite cone: A sandwich composite combining two stiff glass fibre skins with an Aramid (Kevlar-family) honeycomb core. The honeycomb core delivers an extremely high stiffness-to-mass ratio, maintaining pistonic cone behaviour at the excursion levels a 16" driver produces without the mass penalty of a solid composite cone. Injection-moulded foam surround with VAST technology: Injection-moulding produces a foam surround with consistent cell structure and density throughout, delivering precision compliance uniformity across the full excursion range. VAST repositions the surround attachment to maximise effective radiating area across the full 16" diameter. Proprietary surround mechanical clamping ring: Physically secures the surround to the cone and basket simultaneously, providing surround retention beyond adhesive bonding alone essential at the excursion levels and motor forces a 16" triple stack ferrite driver generates during sustained high-output use. Dual Nomex progressive spiders with integrated lead wires: Dual progressive spiders provide linear restoring force symmetry across the considerable excursion range of a 16" driver. Integrated lead wires eliminate the separate tinsel lead, removing a common failure point in a driver engineered for large cone travel. Aluminium die-cast basket with integrated heat sink fins: Active heat dissipation from the motor assembly during sustained high-power use. The heat sink fins increase surface area for passive thermal management a meaningful contributor to long-term reliability at the power levels this driver is designed to handle. Vented pole piece: Air channels through the pole piece reduce thermal compression and back-pressure behind the cone at high excursion, improving linearity and power handling consistency across the operating range. Custom push spring insulated 8 AWG terminals: Heavy-gauge 8 AWG terminals appropriate for the significant current demands of a 16" high-output subwoofer. Push-spring design allows fast, clean wiring for the cable gauges a system of this scale requires. Single 2-ohm voice coil simplified wiring: Presents a direct 2-ohm load to the amplifier. No wiring configuration required connect a 2-ohm stable high-output mono amplifier directly to the 8 AWG terminals. Detachable die-cast aluminium trim ring included: Provides a clean, finished installation appearance at the cutout. Detachable for bare-driver installations where a trim ring is not required. Technical Specs Specification Detail SKU T2S2-16 Brand Rockford Fosgate Driver Size 16" Voice Coil Configuration Single 2-ohm Motor Structure Triple stack segmented ferrite Voice Coil Single layer edge wound aluminium 4" Shorting Ring Integrated aluminium heat-sinking (IDHS) Cone Three-layer glass fibre / Aramid honeycomb / glass fibre composite Dust Cap Aluminium Surround Injection-moulded foam with VAST technology Surround Retention Proprietary mechanical clamping ring Spiders Dual Nomex progressive with integrated lead wires Basket Aluminium die-cast with integrated heat sink fins Pole Piece Vented Input Terminals Custom push spring insulated 8 AWG Trim Ring Detachable die-cast aluminium (included) Power Handling Confirm with supplier Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 2 ohms confirm recommended amplifier power with Rockford Fosgate T2S2-16 documentation Rockford Fosgate Power T2 and T3 series mono amplifiers Custom ported and sealed enclosures designed specifically for the T2S2-16 confirm enclosure volume and port specifications with Rockford Fosgate documentation before building Dedicated audio vehicles, show builds, and high-output SPL installations with purpose-built enclosure bays Rockford Fosgate 8 AWG and heavy-gauge power wiring kits appropriate for high-current 16" subwoofer installations High-capacity capacitors and upgraded electrical systems appropriate for the current demands of a 16" high-output driver at rated power Frequently Asked Questions What is the difference between the T2S2-16 and the T3 19" superwoofers? The T2S2-16 uses a triple stack segmented ferrite motor structure with an 8 AWG terminal and a detachable trim ring, while the T3S2-19 and T3S1-19 use a dual gap multi-pole neodymium push/pull motor, 4 AWG terminals, and an integrated trim ring. The T3 19" models are the largest drivers Rockford Fosgate has ever built; the T2S2-16 is the step below in the large-format range. Both require purpose-built custom enclosures and high-output mono amplifiers. What amplifier does the T2S2-16 require? The T2S2-16 presents a direct 2-ohm load and requires a high-output mono amplifier stable at 2 ohms. Confirm the recommended amplifier power rating with Rockford Fosgate's official T2S2-16 documentation or a qualified installer before specifying an amplifier power handling figures are not provided in the supplier data and must be confirmed before system design. What is the IDHS shorting ring and what does it do? The integrated aluminium heat-sinking shorting ring (IDHS) performs two functions: it reduces inductance variation across the voice coil's excursion range, improving linearity and lowering distortion, and it acts as a heat sink to draw thermal energy away from the voice coil gap during sustained high-power use directly contributing to long-term power handling reliability. What enclosure does the T2S2-16 require? The T2S2-16 requires a custom enclosure built to Rockford Fosgate's published specifications. Standard subwoofer enclosure calculators and generic designs are not appropriate for a 16" high-output ferrite motor driver. Confirm sealed and ported enclosure volumes and port tuning with Rockford Fosgate documentation or a qualified installer before designing or building. How heavy is the T2S2-16? Exact shipping weight is not provided in the supplier data confirm with your supplier before purchase. Rockford Fosgate explicitly notes this driver is exceptionally heavy, and two-person installation is strongly recommended to avoid injury or damage during handling and fitting. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

13" Power T2 Single 2-Ohm Subwoofer Glass Fibre/Aramid Honeycomb Sandwich Cone, 4" Edge-Wound Aluminium Voice Coil, Triple-Stack Ferrite Motor, IDHS, 8-AWG Terminals. Product Overview The Rockford Fosgate Power T2S2-13 is a 13" effective radiating area Single Voice Coil (SVC) subwoofer the 2-Ohm variant of the T2S1-13 platform. The construction is identical to the T2S1-13 with the sole difference being the 2-Ohm voice coil impedance, which provides broader amplifier compatibility than the 1-Ohm T2S1-13. All confirmed T2 platform construction applies: three-layer glass fibre/aramid honeycomb/glass fibre sandwich cone, aluminium dustcap, VAST injection-moulded foam surround with mechanical clamping ring, dual Nomex progressive spiders, die-cast aluminium frame with integrated heat sink fins, single-layer edge-wound aluminium 4" voice coil, triple-stack segmented ferrite motor, integrated aluminium IDHS shorting ring, vented pole piece, and 8-AWG push spring terminals. Key Specifications Effective radiating diameter: 13 inch (cone + surround) Physical basket diameter: Not confirmed — confirm with Rockford Fosgate Voice coil configuration: Single Voice Coil (SVC) Impedance: Title and SKU indicate 2-Ohm — description says 1-Ohm — confirm with Rockford Fosgate Power handling (RMS): Not stated  Voice coil: Single-layer edge-wound aluminium, 4" Cone: Three-layer glass fibre / aramid honeycomb / glass fibre sandwich Dustcap: Aluminium Surround: Injection-moulded VAST foam, proprietary mechanical clamping ring Spider: Dual Nomex progressive with integrated lead wires Frame: Die-cast aluminium with integrated heat sink fins Motor: Triple-stack segmented ferrite Shorting ring: Integrated aluminium IDHS Pole piece: Vented Input terminals: Custom push spring insulated 8-AWG Trim ring: Detachable die-cast aluminium Enclosure type: Not specified Sensitivity / Fs / Xmax / Qts: Not confirmed Mounting depth: Not confirmed Cutout diameter: Not confirmed Enclosure volume: Not confirmed Sold as: Individual unit Weight: 42.5 kg Warranty: Not confirmed Features & Benefits 13" Effective Radiating Area — Total effective piston area (cone plus surround). Physical basket and cutout dimensions must be confirmed from the official T2S2-13 datasheet. 2-Ohm SVC — Broader Amplifier Compatibility Than T2S1-13 — A 2-Ohm SVC is supported by a wider range of high-output mono amplifiers than the 1-Ohm T2S1-13, which requires amplifiers specifically rated stable at 1-Ohm. Two T2S2-13 units in series = 4-Ohm; two in parallel = 1-Ohm (confirm amplifier stability before using 1-Ohm parallel). Glass Fibre / Aramid Honeycomb / Glass Fibre Sandwich Cone — Aerospace-grade structural composite for maximum stiffness and minimum mass — identical construction to T2S1-13. 4" Edge-Wound Aluminium Voice Coil — Largest voice coil in the catalogue; flat-wound conductor for maximum BL product and thermal capacity. Triple-Stack Segmented Ferrite Motor — Deep, high-flux magnetic gap for the 4" voice coil; segmented construction reduces eddy current losses. IDHS Aluminium Shorting Ring — Dual-function: distortion reduction (inductance variation) and heat conduction through the frame's heat sink fins. Die-Cast Aluminium Frame with Integrated Heat Sink Fins — Direct thermal management from motor gap to air. Dual Nomex Progressive Spiders — Progressive compliance for controlled high-excursion operation. Proprietary Surround Mechanical Clamping Ring — Long-term surround durability under sustained large-amplitude movement. 8-AWG Push Spring Terminals — Heaviest gauge wiring in this catalogue. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T2S2-13 Series Power T2 Effective Radiating Area 13 inch ✓ Physical Basket Diameter Not confirmed Voice Coil Single Voice Coil (SVC) Impedance Title/SKU: 2-Ohm / Description: 1-Ohm — confirm with Rockford Fosgate Power Handling (RMS) Not confirmed Voice Coil Single-layer edge-wound aluminium 4" ✓ Cone Glass Fibre / Aramid Honeycomb / Glass Fibre Sandwich ✓ Dustcap Aluminium ✓ Surround VAST Injection-Moulded Foam + Mechanical Clamping Ring ✓ Spider Dual Nomex Progressive, Integrated Lead Wires ✓ Frame Die-Cast Aluminium + Integrated Heat Sink Fins ✓ Motor Triple-Stack Segmented Ferrite ✓ Shorting Ring Integrated Aluminium IDHS ✓ Pole Piece Vented ✓ Input Terminals Push Spring 8-AWG ✓ Trim Ring Detachable Die-Cast Aluminium ✓ Enclosure Type Not specified All Other Specs Not confirmed Sold As Individual Unit Warranty Not confirmed Weight 42.5 kg Frequently Asked Questions What is the impedance of the T2S2-13? The product title states 2-Ohm and the SKU designation "S2" indicates Single 2-Ohm. The product description text states "a single 1-ohm voice coil" — this appears to be copied from the T2S1-13 (1-Ohm) description without updating the impedance reference. Confirm the correct impedance with Rockford Fosgate before purchasing. What is the difference between T2S2-13 and T2S1-13? Assuming the T2S2-13 is the 2-Ohm variant as indicated by the title and SKU: both are identical 13" T2 subwoofers in construction. The T2S2-13's 2-Ohm impedance suits a broader range of mono amplifiers than the T2S1-13's 1-Ohm, which requires amplifiers specifically rated stable at 1-Ohm. What is the power handling? Not confirmed in the supplier data — same blocker as T2S1-13. Confirm from the official T2S2-13 datasheet. What enclosure is required? Enclosure type not specified. Confirm from the official T2S2-13 datasheet. What amplifier is appropriate? Amplifier guidance cannot be published until the impedance conflict is resolved and the RMS power is confirmed. Confirm both with Rockford Fosgate before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

13" Power T2 Single 1-Ohm Subwoofer Glass Fibre/Aramid Honeycomb Sandwich Cone, 4" Edge-Wound Aluminium Voice Coil, Triple-Stack Ferrite Motor, IDHS, 8-AWG Push Spring Terminals. Product Overview The Rockford Fosgate Power T2S1-13 is a 13" effective radiating area Single Voice Coil (SVC) subwoofer with a 1-Ohm impedance from the Power T2 series, designed from the ground up as a high-performance large-format driver. The "13 inches" designation describes the total effective radiating cone area, which includes both the cone and surround assembly the physical basket and cutout dimensions must be confirmed from the official Rockford Fosgate T2S1-13 datasheet. The T2S1-13 introduces several constructions not found elsewhere in this catalogue: a three-layer glass fibre/aramid honeycomb/glass fibre sandwich cone; a single-layer edge-wound aluminium 4" voice coil; a triple-stack segmented ferrite motor structure; a proprietary surround mechanical clamping ring; and 8-AWG custom push spring terminals the heaviest gauge wiring connection in any subwoofer in this batch. The die-cast aluminium frame has integrated heat sink fins and an integrated aluminium IDHS shorting ring. Key Specifications Effective radiating diameter: 13 inch (cone + surround combined) Physical basket diameter: Not confirmed — confirm with Rockford Fosgate Voice coil configuration: Single Voice Coil (SVC) Impedance: 1-Ohm Power handling (RMS): Not stated Voice coil: Single-layer edge-wound aluminium, 4" diameter Cone: Three-layer glass fibre / aramid honeycomb / glass fibre sandwich Dustcap: Aluminium Surround: Injection-moulded foam with VAST, proprietary mechanical clamping ring Spider: Dual Nomex progressive with integrated lead wires Frame: Die-cast aluminium with integrated heat sink fins Motor: Triple-stack segmented ferrite Shorting ring: Integrated aluminium IDHS Pole piece: Vented Input terminals: Custom push spring insulated 8-AWG Trim ring: Detachable die-cast aluminium Enclosure type: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Fs / Xmax / Qts: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Enclosure volume: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 13" Effective Radiating Area — The T2S1-13's 13" rating describes the total effective piston area (cone plus surround), rather than the conventional cone-only diameter measurement. This is a non-standard format — confirm the physical basket dimensions, cutout diameter, and mounting depth from the official Rockford Fosgate T2S1-13 datasheet before building an enclosure or purchasing a pre-built box. Glass Fibre / Aramid Honeycomb / Glass Fibre Sandwich Cone — A three-layer structural composite cone: glass fibre outer and inner skins provide rigidity, while an aramid honeycomb core (a grid structure of hexagonal cells made from aramid fibre) provides the shear stiffness to resist the out-of-plane forces that cause cone breakup. Aramid honeycomb is used in aerospace and motorsport structural panels. This construction produces a very stiff, low-mass cone for high-excursion bass reproduction. 4" Edge-Wound Aluminium Single Voice Coil — A 4" voice coil is the largest in any subwoofer in this catalogue. Edge-wound construction winds the aluminium conductor wire on its edge (flat-wound), maximising the amount of conductor per unit of axial winding height and increasing the voice coil's force factor (BL). This contributes to the motor's ability to drive the large cone assembly to high excursion levels. Triple-Stack Segmented Ferrite Motor — Three ferrite magnet plates stacked to produce a deep, high-flux magnetic gap suitable for the 4" voice coil. The segmented design uses separate magnet segments rather than a continuous ring — reducing eddy current losses. Ferrite rather than neodymium — selected for the thermal stability and deep magnetic gap appropriate to a sustained high-power, large-format application. Integrated Aluminium IDHS Shorting Ring — The aluminium cap on the pole piece serves dual functions: reducing voice coil inductance variation (distortion reduction) and conducting heat from the magnetic gap into the frame's heat sink fins. Die-Cast Aluminium Frame with Integrated Heat Sink Fins — Direct thermal conduction from the motor gap to the surrounding air through the aluminium frame's heat sink fins — critical for a driver of this power level. Dual Nomex Progressive Spiders — Two progressive-compliance spiders provide controlled suspension across a wide excursion range — the progressive spring rate increases stiffness as the cone approaches excursion limits, protecting the voice coil at high output levels. Proprietary Surround Mechanical Clamping Ring — A mechanical clamping ring is used to secure the surround at the basket edge — a physical fastening method rather than standard adhesive bonding, chosen for long-term durability under the mechanical stress of large-amplitude, high-power cone movement. 8-AWG Push Spring Terminals — The heaviest gauge input terminals in this catalogue — 8-AWG push spring type, accommodating very thick wiring appropriate for the expected high current demand at the T2S1-13's power level. VAST Foam Surround — Injection-moulded foam with VAST geometry for increased effective cone area. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T2S1-13 Series Power T2 Effective Radiating Area 13 inch (cone + surround) ✓ Physical Basket Diameter Not confirmed — confirm with Rockford Fosgate Voice Coil Single Voice Coil (SVC) Impedance 1-Ohm ✓ Power Handling (RMS) Not confirmed Voice Coil Size 4" edge-wound aluminium ✓ Cone Glass Fibre / Aramid Honeycomb / Glass Fibre Sandwich ✓ Dustcap Aluminium ✓ Surround Injection-Moulded VAST Foam, Mechanical Clamping Ring ✓ Spider Dual Nomex Progressive, Integrated Lead Wires ✓ Frame Die-Cast Aluminium with Integrated Heat Sink Fins ✓ Motor Triple-Stack Segmented Ferrite ✓ Shorting Ring Integrated Aluminium IDHS ✓ Pole Piece Vented ✓ Input Terminals Push Spring 8-AWG ✓ Trim Ring Detachable Die-Cast Aluminium ✓ Enclosure Type Not specified — confirm with Rockford Fosgate Sensitivity Not confirmed Fs / Xmax / Qts Not confirmed Mounting Depth Not confirmed Cutout Diameter Not confirmed Enclosure Volume Not confirmed Sold As Individual Unit Weight Not confirmed Warranty Not confirmed   Frequently Asked Questions What does "13 inches effective radiating area" mean? Unlike standard subwoofer diameter measurements (which typically measure the cone only), the T2S1-13's 13" measurement describes the total effective piston area — the combined diameter of both the cone and the surround that contributes to acoustic output. The physical basket is likely larger than 13". Confirm the actual basket diameter and cutout dimensions from the official Rockford Fosgate T2S1-13 datasheet. What is aramid honeycomb and why is it used in the cone? Aramid honeycomb is a grid of hexagonal cells made from aramid fibre (the same material as Kevlar). When sandwiched between glass fibre skins, the honeycomb core provides exceptional structural rigidity against the out-of-plane bending forces that cause cone breakup during high-excursion bass reproduction. The honeycomb structure achieves this with extremely low mass — a key property for a large cone that must move quickly and accurately. What is edge-wound voice coil construction? In a standard voice coil, round wire is wound in circular loops. In an edge-wound (flat-wound) design, the conductor is a flat ribbon wound on its edge — packing more conductor material per unit of winding height. This increases the voice coil's force factor (BL product) and power-handling capacity in the same coil height, contributing to the motor's ability to drive the large 13" cone assembly. What is the power handling of the T2S1-13? Power handling (RMS) is not stated in the supplier description or features list. Confirm from the official Rockford Fosgate T2S1-13 datasheet before purchasing any amplifier or publishing any power matching guidance. What enclosure does the T2S1-13 require? Enclosure type (sealed or vented) is not specified in the supplier data — unlike all other subwoofers in this batch. Confirm from the official Rockford Fosgate T2S1-13 datasheet before building or selecting an enclosure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

2,500 Watts, Dual-Amp PowerSync, and MasterSync Control Rockford Fosgate's Flagship Class-BD Constant Power Mono Amplifier. Product Overview The Rockford Fosgate Power T2500-1BDCP is a 2,500W mono amplifier that steps beyond the T1500-1BDCP with two features absent from the lower-wattage models: PowerSync and MasterSync. PowerSync allows two T2500-1BDCP units to be bridged together, delivering a combined 5,000W from a single synchronised pair. MasterSync extends this further one amplifier acts as the master controller for an array of T2500-1BDCP amplifiers, enabling large-format multi-amplifier installations for competition and extreme high-output builds. The core Constant Power, Class-BD, and MOSFET platform is shared with the T1000-1BDCP and T1500-1BDCP adding 1/0 AWG (rather than 4-gauge) power and ground connectors to match the higher current demands of a 2,500W amplifier, a 0°/180° phase switch for precise subwoofer-to-system integration, and blue LED simulated VU signal and power meters for real-time output monitoring. A 24dB/octave crossover, infrasonic filter, and RCA pass-thru complete the subwoofer-dedicated control set. Key Specifications Power output: 2,500W (mono — rated power at specific impedance not confirmed — see Red-flags) Amplifier class: Class-BD Configuration: Monoblock (subwoofer dedicated) Constant Power technology: Yes — up to 25% more power across all impedance loads (supplier-stated) PowerSync: Yes — 2 amplifiers bridged for combined 5,000W output MasterSync: Yes — 1 amplifier controls an array of amplifiers Crossover: 24dB/octave Infrasonic filter: Yes Phase switch: 0°/180° Power supply: MOSFET Output stage: MOSFET Speaker connections: Audiophile grade Power/ground connectors: 1/0 AWG RCA pass-thru outputs: Yes LED meters: Blue LED simulated VU signal and power meters Frequency response: Subwoofer optimised (specific Hz range not confirmed) Signal-to-noise ratio: Not specified — confirm with Rockford Fosgate THD: Not specified — confirm with Rockford Fosgate Input voltage range: Not specified — confirm with Rockford Fosgate Dimensions: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits PowerSync — Two Amplifiers, One Combined 2,500W Output — Two T2500-1BDCP amplifiers in PowerSync mode operate as a single synchronised unit, delivering a combined 5,000W. For installations where a single 2,500W amplifier falls short of the subwoofer system's demands, PowerSync provides a clean, factory-supported solution — no external bridging issues or incompatibility risks. MasterSync — Array Control for Multi-Amplifier Builds — In MasterSync configuration, one T2500-1BDCP acts as the master unit and controls the volume and settings of an array of additional amplifiers. This enables large-format high-output installations — competition SPL vehicles, extreme builds — to be managed coherently from a single control point. 1/0 AWG Power and Ground Connectors — Stepping up from the 4-gauge connectors on the 1,000W and 1,500W models, the T2500-1BDCP takes 1/0 AWG (approximately 53mm²) wiring — matching the substantially higher current demands of a 2,500W amplifier. Proper 1/0 AWG wiring is essential to prevent voltage drop and power delivery limitations at full output. 0°/180° Phase Switch — Allows the subwoofer output to be switched between in-phase and out-of-phase relative to the main speakers, enabling precise time-alignment and acoustic integration in complex multi-driver subwoofer systems or when compensating for enclosure placement. Blue LED Simulated VU Signal and Power Meters — Real-time visual feedback of signal level and output power — allowing gain structure optimisation during system setup and providing a visual indication of output activity during use. Constant Power Technology — Up to 25% More Power Across All Impedance Loads — The same Constant Power platform as the T1000-1BDCP and T1500-1BDCP, applied here to 2,500W — maintaining maximum output more consistently across 1Ω, 2Ω, and 4Ω loads than a standard amplifier design. (Supplier-stated performance claim.) Class-BD Topology — Rockford Fosgate's proprietary Class-BD delivers high-current efficiency for subwoofer loads, combining characteristics of Class-B/AB and Class-D. MOSFET Power Supply and Output Stage — Dual MOSFET implementation provides the fast switching speed and thermal stability needed for sustained 2,500W operation. 24dB/Octave Crossover — Steep crossover slope tightly limits the subwoofer frequency band for clean integration in multi-amplifier car audio systems. Infrasonic Filter — At 2,500W, removing inaudible sub-20Hz content that could over-excite subwoofer cone excursion is particularly important for driver protection. RCA Pass-Thru Outputs — Signal looping for downstream amplifiers in multi-amp builds. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T2500-1BDCP Series Power Power Output 2,500W Amplifier Class Class-BD Configuration Monoblock Application Subwoofer Dedicated Constant Power Yes — up to 25% more across all impedance loads (supplier-stated) PowerSync Yes — 2 amps = combined 5,000W MasterSync Yes — 1 amp controls array Crossover 24dB/Octave Infrasonic Filter Yes Phase Switch 0° / 180° Power Supply MOSFET Output Stage MOSFET Speaker Connections Audiophile Grade Power/Ground Connectors 1/0 AWG RCA Pass-Thru Yes LED Meters Blue LED Simulated VU Signal and Power Meters Rated Power (per impedance) Not specified — confirm with Rockford Fosgate Frequency Response Subwoofer optimised — Hz range not specified Signal-to-Noise Ratio Not specified THD Not specified Input Voltage Range Not specified Dimensions Not specified Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable subwoofer configurations: Single or multiple subwoofer setups requiring a high-output dedicated mono amplifier 1Ω, 2Ω, and 4Ω impedance loads (confirm RMS power per impedance with Rockford Fosgate) High-efficiency ported, sealed, and bandpass subwoofer enclosures Competition SPL and extreme high-output car audio builds Dual-amplifier builds using PowerSync (2× T2500-1BDCP = 5,000W combined) Choosing between T1000, T1500, and T2500: T1000-1BDCP (1,000W): Suited to most quality subwoofer builds and daily use systems T1500-1BDCP (1,500W): Larger subwoofers, dual-sub builds, high-efficiency ported enclosures T2500-1BDCP (2,500W): Competition and extreme builds; PowerSync and MasterSync for multi-amp systems Pairs well with: A second T2500-1BDCP (PowerSync for 5,000W combined) 1/0 AWG amplifier wiring kits Rockford Fosgate Power series T2 and T3 subwoofers Rockford Fosgate or aftermarket RCA signal cables Frequently Asked Questions What does PowerSync allow the T2500-1BDCP to do? PowerSync allows two T2500-1BDCP amplifiers to be electronically bridged together and operate as a single synchronised unit, combining their output for a total of 5,000W. This is a factory-supported configuration — confirm specific wiring and impedance requirements for PowerSync operation with Rockford Fosgate or your authorised installer. What is MasterSync and when would I use it? MasterSync designates one T2500-1BDCP as a master controller for an array of T2500-1BDCP amplifiers. Volume and settings are controlled from the master unit, coordinating multiple amplifiers in large-format installations — competition vehicles, extreme builds, or installations with multiple subwoofer arrays requiring unified control. Why does the T2500-1BDCP require 1/0 AWG wiring when the T1000 and T1500 use 4-gauge? A 2,500W amplifier draws substantially more current than a 1,000W or 1,500W amplifier. 1/0 AWG cable (approximately 53mm²) has significantly lower resistance and higher current carrying capacity than 4-gauge — essential for preventing voltage drop, maintaining full power delivery, and protecting the wiring from overheating at the T2500-1BDCP's peak current draw. What does the 0°/180° phase switch do? The phase switch allows the subwoofer's acoustic output to be inverted 180° relative to the main speakers. This compensates for acoustic cancellation that can occur when a subwoofer is positioned out of phase with the main speakers — either due to enclosure placement, vehicle acoustics, or driver polarity — ensuring maximum bass output at the listening position. What is the difference between the T2500-1BDCP and the T1500-1BDCP? The T2500-1BDCP delivers 2,500W versus the T1500's 1,500W, and adds PowerSync (two-amp bridging for 5,000W), MasterSync (array control), a 0°/180° phase switch, blue LED VU meters, and 1/0 AWG wiring connectors. The T1500-1BDCP uses 4-gauge connectors and does not include these features. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1S2-12 Power 12" T1 Slim Single 2-Ohm Subwoofer T1 Performance, Shallow Depth Product Overview The Rockford Fosgate T1S2-12 is a 12" slimline single 2-ohm subwoofer from the flagship Power T1 series, rated at 600W RMS and 1200W peak. Engineered specifically for installations where traditional-depth subwoofers will not fit, the T1S2-12 is not a generic shallow driver it is a purpose-designed slimline subwoofer built to deliver near-identical performance characteristics to the full-depth Power T1 range, through a suite of patent-pending and proprietary technologies that are unique to the T1 slimline platform. At the heart of the T1S2-12 is a proprietary slotted voice coil assembly with interior and exterior windings that enables exceptional long-excursion travel from a reduced mounting depth addressing the fundamental challenge of shallow subwoofer design where limited cone excursion typically constrains bass output. A high-energy neodymium motor structure, proprietary split yoke pass-through motor technology, encapsulating voice coil-to-former coupling, integrated copper cap heat-sinking shorting ring (IDHS), dual Nomex progressive spiders with integrated lead wires, and a carbon fibre/PMI/glass fibre composite cone combine to produce a slimline driver engineered with the same rigour as the full-depth T1 range. Optimised for sealed enclosures. Detachable die-cast aluminium trim ring included; optional grille insert available separately. Key Specifications Driver size: 12" slimline Voice coil configuration: Single 2-ohm Power handling: 600W RMS / 1200W peak Motor structure: High-temp high-energy neodymium Voice coil: Dual wound 2.5" with interior and exterior windings (slotted assembly) Cone: Carbon fibre / PMI / glass fibre composite with aluminium dust cap Surround: Injection-moulded foam with VAST technology Spiders: Dual Nomex progressive with integrated lead wires Basket: Aluminium die-cast with integrated heat sink fins Shorting ring: Integrated copper cap heat-sinking (IDHS) Input terminals: Custom insulated push spring 10 AWG Pole piece: Vented Trim ring: Detachable die-cast aluminium (included) Grille: Optional grille insert (sold separately) Optimised for: Sealed enclosures Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Proprietary slotted voice coil assembly with interior/exterior windings (patent pending): The engineering core of the T1S2-12. The slotted assembly with dual winding configuration allows the voice coil to travel significantly further than a conventional shallow driver voice coil, generating the long excursion needed for deep, high-output bass from a reduced mounting depth. This is the key technology that separates the T1S2-12 from generic shallow subwoofers. Proprietary split yoke pass-through motor technology (patent pending): The split yoke design allows the motor structure to be configured in a way that enables greater excursion travel within a slimmer overall assembly depth. A fundamental motor architecture innovation that contributes directly to the T1S2-12's ability to match full-depth T1 performance characteristics. High-temp high-energy neodymium motor structure: Neodymium magnets produce a stronger magnetic field per unit mass than conventional ferrite magnets, enabling higher motor force (BL) in a more compact and lighter motor assembly critical for achieving T1-level sensitivity and power handling in a slimline format where magnet volume is constrained. Encapsulating voice coil-to-former coupling technology (patent pending): The voice coil is coupled to the former through an encapsulating process that increases the bonding surface area and strength, preventing delamination at the high excursion levels and sustained power inputs the T1S2-12 is designed to handle. Integrated copper cap heat-sinking shorting ring (IDHS): The copper shorting ring reduces inductance variation across the excursion range (improving linearity and reducing distortion) while simultaneously acting as a heat sink to draw thermal energy away from the voice coil gap directly contributing to sustained power handling reliability. Carbon fibre/PMI/glass fibre composite cone with aluminium dust cap: A multi-material composite cone significantly stiffer and lighter than conventional paper or polypropylene cones, maintaining pistonic accuracy at the high excursion levels the slotted voice coil assembly enables. PMI (polymethacrylimide) foam core adds internal damping to suppress cone resonances. Injection-moulded foam surround with VAST technology: VAST (Vertical Attach Surround Technique) reclaims cone surface area at the surround attachment, and the injection-moulded foam surround provides consistent, repeatable excursion compliance across the full travel range more precise than rubber or cloth surrounds at high excursion levels. Dual Nomex progressive spiders with integrated lead wires: Dual progressive spiders provide linear restoring force symmetry across the extended excursion range the slotted voice coil enables. Integrated lead wires eliminate the traditional separate tinsel lead removing a common failure point in high-excursion slimline drivers. Aluminium die-cast basket with integrated heat sink fins: The basket fins actively dissipate heat from the motor assembly during sustained high-power use a thermal management feature particularly important in compact, sealed enclosure environments where heat accumulates more rapidly than in larger enclosure volumes. Single 2-ohm voice coil simplified wiring: Single voice coil eliminates dual-coil wiring complexity, presenting a direct 2-ohm load to the amplifier. Straightforward pairing with any 2-ohm stable mono amplifier without impedance configuration decisions. Vented pole piece: Air channels through the pole piece reduce thermal compression and back-pressure behind the cone at high excursion levels, improving linearity and power handling consistency. Custom insulated push spring 10 AWG terminals: Appropriate for the current demands of a 600W RMS, 2-ohm system. Push-spring design allows fast, clean wiring without tools. Optimised for sealed enclosures: Rockford Fosgate has specifically tuned the T1S2-12 for sealed enclosure use, ensuring the driver's compliance and Qts parameters produce the intended bass response in a sealed alignment confirm recommended enclosure volume with Rockford Fosgate documentation before building. Detachable die-cast aluminium trim ring included: Provides a clean, finished appearance at the installation cutout. The detachable design allows removal for bare-driver installation where a trim ring is not required. Optional grille insert available separately: Grille protection is available for installations where driver exposure is a concern confirm compatible part number with your supplier. Technical Specs Specification Detail SKU T1S2-12 Brand Rockford Fosgate Driver Size 12" slimline Voice Coil Configuration Single 2-ohm Power Handling 600W RMS / 1200W peak Motor Structure High-temp high-energy neodymium Voice Coil Dual wound 2.5"; interior and exterior windings (slotted assembly) Voice Coil Coupling Encapsulating voice coil-to-former technology (patent pending) Motor Technology Proprietary split yoke pass-through (patent pending) Cone Carbon fibre / PMI / glass fibre composite Dust Cap Aluminium Surround Injection-moulded foam with VAST technology Spiders Dual Nomex progressive with integrated lead wires Basket Aluminium die-cast with integrated heat sink fins Shorting Ring Integrated copper cap heat-sinking (IDHS) Pole Piece Vented Input Terminals Custom insulated push spring 10 AWG Trim Ring Detachable die-cast aluminium (included) Grille Optional insert (sold separately) Enclosure Optimisation Sealed Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Mono amplifiers stable at 2 ohms, rated at or near 600W RMS Rockford Fosgate Power T1 and T2 series mono amplifiers Custom sealed enclosures designed for the T1S2-12 confirm recommended enclosure volume with Rockford Fosgate documentation before building Vehicles where traditional-depth subwoofers will not fit: behind-seat ute and truck installations, shallow boot floor vehicles, and custom fabrication builds with depth constraints Rockford Fosgate T1S-1X12 slim sealed loaded enclosure (purpose-built enclosure for the T1 slim driver range) Rockford Fosgate 10 AWG and heavy-gauge wiring kits for 2-ohm mono amplifier installation Rockford Fosgate RCA cables and signal processors Frequently Asked Questions How does the T1S2-12 achieve T1-level performance in a slimline format? The T1S2-12 uses a proprietary slotted voice coil assembly with interior and exterior windings (patent pending) that enables long excursion travel from a reduced mounting depth the key constraint of conventional shallow drivers. Combined with the split yoke pass-through motor technology (patent pending), neodymium motor structure, and encapsulating voice coil coupling, the T1S2-12 is engineered to deliver near-identical performance to traditional-depth T1 subwoofers from a significantly shallower installation profile. What impedance does the T1S2-12 present to the amplifier? The T1S2-12 is a single 2-ohm voice coil driver, presenting a direct 2-ohm load to the amplifier. No wiring configuration is required connect a 2-ohm stable mono amplifier rated at or near 600W RMS and go. Is the T1S2-12 suitable for the Rockford Fosgate T1S-1X12 loaded enclosure? The T1S-1X12 is a purpose-built slim sealed loaded enclosure from Rockford Fosgate that houses a T1 slim driver. Confirm with your supplier whether the T1S2-12 is the specific driver variant installed in the T1S-1X12 or whether it is compatible as a replacement driver before purchasing. What enclosure type is the T1S2-12 optimised for? The T1S2-12 is specifically optimised for sealed enclosures. Rockford Fosgate has tuned the driver's parameters for sealed alignment confirm recommended enclosure volume with official Rockford Fosgate documentation or a qualified installer before designing or building an enclosure. Is a grille included with the T1S2-12? No. The T1S2-12 ships with a detachable die-cast aluminium trim ring only. An optional grille insert is available separately confirm the compatible part number with your supplier before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1S1-12 Power 12" T1 Slim Single 1-Ohm Subwoofer T1 Performance, Shallow Depth, 1-Ohm Ready Product Overview The Rockford Fosgate T1S1-12 is a 12" slimline single 1-ohm subwoofer from the flagship Power T1 series, rated at 600W RMS and 1200W peak. The 1-ohm stable counterpart to the T1S2-12, it carries the complete T1 slimline technology stack in a single 1-ohm voice coil configuration presenting a direct 1-ohm load to the amplifier for maximum power extraction from 1-ohm stable mono amplifiers without any wiring configuration required. Like the T1S2-12, the T1S1-12 is purpose-engineered to deliver near-identical performance characteristics to the full-depth Power T1 range from a significantly shallower mounting depth, through the same suite of proprietary and patent-pending technologies: the slotted voice coil assembly with interior and exterior windings enabling long excursion travel, the split yoke pass-through motor technology, high-energy neodymium motor structure, encapsulating voice coil-to-former coupling, integrated copper cap heat-sinking shorting ring (IDHS), dual Nomex progressive spiders with integrated lead wires, and carbon fibre/PMI/glass fibre composite cone. Optimised for sealed enclosures. Detachable die-cast aluminium trim ring included; optional grille insert available separately. Key Specifications Driver size: 12" slimline Voice coil configuration: Single 1-ohm Power handling: 600W RMS / 1200W peak Motor structure: High-temp high-energy neodymium Voice coil: Dual wound 2.5"; interior and exterior windings (slotted assembly) Cone: Carbon fibre / PMI / glass fibre composite with aluminium dust cap Surround: Injection-moulded foam with VAST technology Spiders: Dual Nomex progressive with integrated lead wires Basket: Aluminium die-cast with integrated heat sink fins Shorting ring: Integrated copper cap heat-sinking (IDHS) Input terminals: Custom insulated push spring 10 AWG Pole piece: Vented Trim ring: Detachable die-cast aluminium (included) Grille: Optional insert (sold separately) Optimised for: Sealed enclosures Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Single 1-ohm voice coil direct 1-ohm load, zero wiring complexity: The defining differentiator from the T1S2-12. A single 1-ohm voice coil presents a direct 1-ohm load to any 1-ohm stable mono amplifier no parallel or series wiring decisions, no configuration required. The most direct path to maximum power output from a 1-ohm stable amplifier in a slimline 12" T1 driver. Proprietary slotted voice coil assembly with interior/exterior windings (patent pending): Enables long excursion travel from a reduced mounting depth the fundamental engineering challenge of slimline subwoofer design. The slotted assembly with dual winding configuration allows the voice coil to travel significantly further than a conventional shallow driver, generating the displacement needed for deep, high-output bass from a slim installation profile. Proprietary split yoke pass-through motor technology (patent pending): A motor architecture innovation that enables greater excursion travel within a slimmer overall assembly depth, working in combination with the slotted voice coil to produce T1-level bass performance from a shallow driver. High-temp high-energy neodymium motor structure: Neodymium magnets produce significantly stronger magnetic fields per unit mass than conventional ferrite magnets, enabling high motor force (BL) in the compact, lightweight motor assembly required for a slimline design delivering the sensitivity and power handling of a T1 driver from a reduced physical footprint. Encapsulating voice coil-to-former coupling technology (patent pending): Increases bonding surface area and strength between the voice coil and former, preventing delamination at the high excursion levels and sustained 600W RMS input the T1S1-12 is designed for. Integrated copper cap heat-sinking shorting ring (IDHS): Simultaneously reduces inductance variation across the excursion range (improving linearity and reducing distortion) and draws thermal energy away from the voice coil gap essential for sustained 600W RMS reliability in compact, sealed enclosure environments where heat accumulates rapidly. Carbon fibre/PMI/glass fibre composite cone with aluminium dust cap: A stiff, lightweight multi-material composite significantly stiffer than paper or polypropylene cones, maintaining pistonic accuracy across the extended excursion range the slotted assembly enables. PMI foam core adds internal damping to suppress cone resonances. Injection-moulded foam surround with VAST technology: VAST reclaims cone surface area at the surround attachment, maximising effective piston area in the 12" slimline format. The injection-moulded foam surround provides consistent, repeatable compliance across the full travel range. Dual Nomex progressive spiders with integrated lead wires: Dual progressive spiders provide linear restoring force symmetry across the extended excursion range. Integrated lead wires eliminate the traditional separate tinsel lead removing a common high-excursion failure point that is particularly critical in a slimline driver designed for long voice coil travel. Aluminium die-cast basket with integrated heat sink fins: The basket fins actively dissipate heat from the motor assembly during sustained high-power use a thermal management feature particularly important in compact sealed enclosure installations where back-panel heat accumulation is a reliability concern. Vented pole piece: Air channels through the pole piece reduce thermal compression and back-pressure behind the cone at high excursion levels, improving linearity and power handling consistency in sealed enclosure use. Custom insulated push spring 10 AWG terminals: Appropriate for the high current demands of a 600W RMS, 1-ohm system. Push-spring design allows fast, clean wiring without tools. Optimised for sealed enclosures: The T1S1-12 is specifically tuned for sealed enclosure use. Confirm recommended enclosure volume with Rockford Fosgate documentation before building to ensure the intended bass response is achieved. Detachable die-cast aluminium trim ring included: Provides a clean, finished installation appearance at the cutout. Detachable for bare-driver installations where a trim ring is not required. Optional grille insert available separately: Confirm compatible part number with your supplier for installations where driver protection is required. Technical Specs Specification Detail SKU T1S1-12 Brand Rockford Fosgate Driver Size 12" slimline Voice Coil Configuration Single 1-ohm Power Handling 600W RMS / 1200W peak Motor Structure High-temp high-energy neodymium Voice Coil Dual wound 2.5"; interior and exterior windings (slotted assembly) Voice Coil Coupling Encapsulating voice coil-to-former technology (patent pending) Motor Technology Proprietary split yoke pass-through (patent pending) Cone Carbon fibre / PMI / glass fibre composite Dust Cap Aluminium Surround Injection-moulded foam with VAST technology Spiders Dual Nomex progressive with integrated lead wires Basket Aluminium die-cast with integrated heat sink fins Shorting Ring Integrated copper cap heat-sinking (IDHS) Pole Piece Vented Input Terminals Custom insulated push spring 10 AWG Trim Ring Detachable die-cast aluminium (included) Grille Optional insert (sold separately) Enclosure Optimisation Sealed Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Mono amplifiers stable at 1 ohm, rated at or near 600W RMS Rockford Fosgate Power T1 and T2 series mono amplifiers (1-ohm stable) Custom sealed enclosures designed for the T1S1-12 confirm recommended sealed enclosure volume with Rockford Fosgate documentation before building Vehicles where traditional-depth subwoofers will not fit: behind-seat ute and truck installations, shallow boot floor vehicles, and custom fabrication builds with depth constraints Rockford Fosgate T1S-1X12 slim sealed loaded enclosure (purpose-built slim sealed enclosure in the T1 slimline range) Rockford Fosgate 10 AWG and heavy-gauge wiring kits for 1-ohm mono amplifier installation Rockford Fosgate RCA cables and signal processors Frequently Asked Questions What is the difference between the T1S1-12 and T1S2-12? Both are 12" T1 slimline subwoofers with identical 600W RMS power handling and the same complete T1 slimline technology stack. The T1S1-12 has a single 1-ohm voice coil presenting a direct 1-ohm load, while the T1S2-12 has a single 2-ohm voice coil presenting a direct 2-ohm load. Choose the T1S1-12 when your amplifier is 1-ohm stable and 1-ohm wiring is the system target; choose the T1S2-12 for 2-ohm stable amplifier pairings. What impedance does the T1S1-12 present to the amplifier? The T1S1-12 is a single 1-ohm voice coil driver, presenting a direct 1-ohm load. No wiring configuration is required connect a 1-ohm stable mono amplifier rated at or near 600W RMS directly to the 10 AWG push spring terminals. How does the T1S1-12 achieve T1-level bass performance in a slimline format? The T1S1-12 uses a proprietary slotted voice coil assembly with interior and exterior windings (patent pending) enabling long excursion travel from a reduced mounting depth, combined with a split yoke pass-through motor technology (patent pending) and high-energy neodymium motor structure. These technologies together allow the T1S1-12 to deliver near-identical performance characteristics to a traditional-depth Power T1 subwoofer from a significantly shallower installation profile. What enclosure type is the T1S1-12 optimised for? The T1S1-12 is specifically optimised for sealed enclosures. Confirm recommended sealed enclosure volume with official Rockford Fosgate documentation or a qualified installer before designing or building an enclosure to ensure the intended bass response is achieved. Is a grille included with the T1S1-12? No. The T1S1-12 ships with a detachable die-cast aluminium trim ring only. An optional grille insert is available separately confirm the compatible part number with your supplier before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1S-1X12 Power 12" T1 Slim Sealed Loaded Enclosure Big Thump, Slim Footprint Product Overview The Rockford Fosgate T1S-1X12 is a factory-loaded sealed enclosure housing a single 12" Power T1 slim subwoofer with a 600 Watt RMS power handling capacity. Designed specifically for under-seat and behind-seat truck installations where depth is restricted but output expectations are anything but, the T1S-1X12 delivers the deep, solid thump characteristic of a sealed enclosure without demanding the space of a traditional subwoofer box. Pre-wired to 1 ohm straight from the factory, the T1S-1X12 is ready to be pushed hard by a compatible mono amplifier no internal wiring, no driver installation, and no enclosure building required. The slim-line wedge profile is constructed from 5/8" MDF with a premium black carpet finish and stitched Rockford Fosgate logo, and ships complete with a grille for immediate, professional-looking installation in utes, SUVs, and cab-style vehicles across Australia. Key Specifications Subwoofer: Single 12" Rockford Fosgate Power T1 slim Power handling: 600W RMS Pre-wired impedance: 1 ohm Enclosure type: Sealed Enclosure design: Slim-line wedge (truck/under-seat style) Construction: 5/8" MDF Finish: Black carpet with black stitching and Rockford Fosgate logo Input terminals: 12 AWG spring-loaded quick-release Grille: Included Features & Benefits 600W RMS power handling: The T1S-1X12 is built to take serious power. Paired with a compatible 600W mono amplifier, it delivers the kind of authoritative bass output that belies its slim profile ideal for Australian ute and SUV builds where space is tight but bass expectations are high. Pre-wired to 1 ohm: Factory pre-wired to a 1-ohm load, the T1S-1X12 is ready to maximise output from a compatible mono amplifier straight out of the box. No internal wiring configuration required connect your amplifier and go. Sealed enclosure for deep, tight bass: The sealed design produces the deep, solid thump preferred by enthusiasts who want accurate, controlled bass response rather than the louder but less precise output of a ported enclosure. Ideal for rock, hip-hop, and bass-heavy Australian country and electronic music genres. Slim-line wedge profile: Purpose-designed for behind-seat and under-seat installation in utes, trucks, and cab-style vehicles. The wedge shape maximises internal enclosure volume within a minimal height footprint, fitting where standard subwoofer boxes simply cannot. 5/8" MDF construction: Medium-density fibreboard walls provide the rigidity and resonance control needed for accurate bass reproduction, minimising enclosure flex and unwanted panel vibration at high output levels. Premium black carpet with stitched Rockford Fosgate logo: A factory-finished appearance that looks purpose-built rather than aftermarket. The black carpet and black stitching integrate cleanly into the interiors of most Australian utes and SUVs. 12 AWG spring-loaded quick-release input terminals: Tool-free wiring connection and disconnection. Practical for installs where the enclosure may need to be temporarily removed common in ute tray and cab configurations. Grille included: Ships with a protective grille fitted, ready for immediate installation without sourcing additional accessories. Complete loaded enclosure: Subwoofer, enclosure, wiring, and grille are all included. No separate driver purchase, no box building, and no guesswork on enclosure tuning a complete plug-and-play subwoofer solution. Technical Specs Specification Detail SKU T1S-1X12 Brand Rockford Fosgate Subwoofer Driver 12" Rockford Fosgate Power T1 Slim Power Handling 600W RMS Pre-Wired Impedance 1 ohm Enclosure Type Sealed Enclosure Style Slim-line wedge (truck/under-seat) Construction Material 5/8" MDF Finish Black carpet; black stitching Logo Stitched Rockford Fosgate logo Input Terminals 12 AWG spring-loaded quick-release Grille Included Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Rockford Fosgate Power and Punch series mono amplifiers rated at 600W RMS into 1 ohm Utes, trucks, and dual-cab vehicles with behind-seat or under-seat storage space SUVs and wagons with underfloor or rear cargo area installations Vehicles requiring a slim subwoofer solution where standard enclosure depth is not available Rockford Fosgate wiring kits and RCA cables for amplifier integration Frequently Asked Questions What amplifier do I need for the T1S-1X12? The T1S-1X12 is pre-wired to 1 ohm and handles 600W RMS. A mono amplifier stable at 1 ohm and rated at or near 600W RMS is recommended for optimal performance such as a compatible Rockford Fosgate Power or Punch mono amplifier. Will the T1S-1X12 fit behind the seat of my ute or dual-cab? The T1S-1X12 is specifically designed for behind-seat and under-seat truck and ute installations using a slim-line wedge profile. Confirm the exact enclosure dimensions with your supplier and measure your available space before purchase, as dimensions vary between vehicle models. Is the T1S-1X12 a ported or sealed enclosure? It is a sealed enclosure. Sealed designs deliver deep, tight, and accurate bass with a solid thump character preferred for music genres and listeners who prioritise bass quality and control over maximum volume output. Does the T1S-1X12 come with a subwoofer already installed? Yes. The T1S-1X12 is a fully loaded enclosure the 12" Power T1 slim subwoofer is factory-installed, pre-wired to 1 ohm, and ships with a grille included. Connect your amplifier to the spring-loaded input terminals and it is ready to use. Can I rewire the T1S-1X12 to a different impedance? The T1S-1X12 ships pre-wired to 1 ohm. Rewiring to a different impedance depends on the voice coil configuration of the installed T1 slim driver. Confirm the driver's voice coil specification with your supplier or installer before attempting any rewiring. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1S-1X10P Power 10" 500 Watt Slim Vented Loaded Enclosure Built for truck installs that demand serious output without sacrificing cabin space, the T1S-1X10P pairs a Power T1 slim 10" subwoofer with a precision-tuned vented wedge enclosure rated at 500 watts RMS and configured for maximum current at 1 ohm. Product Overview The T1S-1X10P is Rockford Fosgate's loaded slim vented enclosure from the Power Series, housing the T1S1-10 Power T1 slim 10" subwoofer in a wedge-profile MDF box designed specifically for behind-seat truck installations where depth is limited. Despite the slim-line footprint, the enclosure is vented through a high-flow, low-noise slotted port that is tuned to enhance hard-hitting, boomy bass frequencies rather than the tighter, more controlled output of a sealed design. The 1-ohm nominal impedance configuration allows the T1S1-10 driver to be pushed with serious amplifier power, with 500 watts RMS and 1000 watts peak power handling supported from within a compact wedge profile. The enclosure is constructed from 5/8" MDF and finished in black carpet with black stitched Rockford Fosgate logo detailing. Spring-loaded 12 AWG input terminals provide quick-release connectivity, and a grille is included for driver protection. Klippel verified and CEA-2031 compliant, with a 1-year warranty. Features & Benefits Power T1 Slim Subwoofer with 500W RMS Power Handling: The T1S1-10 Power T1 slim driver is rated at 500 watts RMS and 1000 watts peak, delivering Power Series output capacity from a subwoofer specifically designed for minimum-depth enclosures. Klippel verification confirms the driver's performance parameters have been measured and optimised for accuracy at high excursion levels. Vented Wedge Enclosure Tuned for Hard-Hitting Bass: The slotted port is tuned specifically to enhance hard-hitting, boomy bass frequencies, making the T1S-1X10P the preferred choice for listeners who want maximum impact and low-frequency punch rather than tight, sealed-box accuracy. High-Flow, Low-Noise Slotted Vent: The slotted port design maximises airflow through the enclosure at resonance while minimising port noise and chuffing at high output levels, maintaining clean bass output as amplifier power increases. 1-Ohm Nominal Impedance: The 1-ohm configuration allows the T1S-1X10P to be driven directly from a monoblock amplifier at its lowest stable impedance, maximising available output power from compatible amplifiers and delivering the kind of output associated with a much larger system. Slim-Line Wedge Profile for Truck Behind-Seat Installation: The wedge dimensions of 4.2" x 6.3" depth and 14.5" height allow the T1S-1X10P to fit behind the seats of most trucks without consuming the cab's usable passenger or storage space. 5/8" MDF Construction: The enclosure is constructed from 5/8" Medium Density Fiberboard, providing structural rigidity and acoustic mass suited to vented subwoofer enclosure requirements. 12 AWG Spring-Loaded Input Terminals: The spring-loaded terminal design accepts wire up to 12 AWG and provides a quick-release connection for easy installation or removal without tools. Black Carpet Finish with Stitched Logo: The premium black carpet finish with black-stitched Rockford Fosgate logo detailing provides a clean, finished appearance suited to in-cabin truck installations. Grille Included: A grille is included in the box for full driver protection after installation. CEA-2031 Compliant: Woofer power handling conforms to CEA-2031 industry standards, confirming the 500W RMS rating is a real, tested figure. Technical Specs Specification Detail SKU T1S-1X10P Series Power Woofer Size 10" Woofer Quantity 1 Woofer Series Power T1S (T1S1-10) Power Handling (RMS) 500W Power Handling (Peak) 1000W Nominal Impedance 1 Ohm Frequency Response 20 Hz - 200 Hz Enclosure Type Vented (Shallow Wedge) Enclosure Material 5/8" MDF Enclosure Finish Black Carpet with Black Stitching Speaker Connector Spring-loaded, up to 12 AWG Grille Included Dimensions (H x W x D1 x D2) 14.5" x 31.5" x 4.2" x 6.3" (37.0 cm x 80.0 cm x 10.7 cm x 15.9 cm) Shipping Weight 36 lbs (16.3 kg) Compliance CEA-2031, Klippel Verified Warranty 1 Year Goes Well With The T1S-1X10P operates at 1 ohm and handles 500 watts RMS, requiring a monoblock amplifier that is stable at 1 ohm with sufficient output to drive it effectively. Rockford Fosgate's R2-1200X1 is a well-matched amplifier option, delivering substantial power at 1 ohm from within the Prime Series range. A 4-gauge amplifier wiring kit is required for the power and ground run, and a quality RCA interconnect from the head unit's subwoofer pre-out is the recommended signal source connection. For truck installations requiring front and rear speaker amplification alongside the T1S-1X10P, a separate 4-channel amplifier such as the R2-300X4 or R2-200X2 connected via the monoblock's RCA pass-through is the recommended approach. Frequently Asked Questions Is the T1S-1X10P a sealed or vented enclosure, and how does that affect the bass character? The T1S-1X10P is a vented enclosure, using a high-flow slotted port tuned to enhance hard-hitting, boomy low-frequency output. This makes it the preferred choice for listeners who want maximum impact and low-frequency punch. For tighter, more controlled bass with greater transient accuracy, a sealed enclosure would be the alternative. Rockford Fosgate's P300-10T is an example of a sealed powered truck enclosure if a different bass character is preferred. What amplifier is required, and what impedance does the T1S-1X10P present? The T1S-1X10P is configured at 1-ohm nominal impedance, requiring a monoblock amplifier that is rated stable at 1 ohm. Confirm the amplifier's 1-ohm stability rating before purchase, as not all monoblock amplifiers support 1-ohm operation. At 500 watts RMS power handling, the amplifier should be capable of delivering at least 500 watts at 1 ohm for the driver to reach its rated output. Does the T1S-1X10P include a grille and all hardware needed for installation? Yes. The T1S-1X10P includes a grille for driver protection and spring-loaded 12 AWG input terminals are built into the enclosure. An amplifier, amplifier wiring kit, and RCA interconnect are required separately for a complete installation. Will the T1S-1X10P fit behind the seat of my truck? The T1S-1X10P measures 14.5" high, 31.5" wide, and has a wedge depth ranging from 4.2" to 6.3". These dimensions are designed for common truck behind-seat applications, but clearance varies by vehicle. Measure the available space behind the seat in your specific truck before purchase to confirm the enclosure will fit without obstructing the seat's range of movement. What does Klippel verification mean for the T1S1-10 driver? Klippel is an independent speaker measurement and certification programme that identifies and corrects non-linear distortion parameters in speaker drivers, including suspension non-linearities and motor force variation across the cone's travel range. Klippel verification on the T1S1-10 driver confirms that its performance parameters have been accurately measured and optimised, ensuring the driver delivers clean, low-distortion output at the high excursion levels produced at 500 watts RMS. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1D412 Power 12" T1 Dual 4-Ohm Subwoofer 800 Watts, VAST Technology, T1 Performance in 12" Product Overview The Rockford Fosgate T1D412 is a 12" dual 4-ohm voice coil subwoofer from the flagship Power T1 series, rated at 800 Watts RMS and 1600 Watts peak. Bringing the full suite of Power T1 technologies to the 12" format, the T1D412 delivers the same patented VAST cone technology, FlexFit die-cast aluminium basket, Kevlar fibre reinforced paper cone, Nomex-reinforced high-temp voice coil, and anodized aluminium construction as the T1 15" range in the more universally applicable 12" driver size suited to a wider range of enclosures and Australian vehicle builds. Patented VAST (Vertical Attach Surround Technique) technology increases the effective cone surface area by up to 25% over a conventional surround attachment, allowing the T1D412 to move more air and produce more bass output per watt than a standard 12" driver performing, in Rockford Fosgate's own terms, like a much larger woofer. The dual 4-ohm configuration wires in parallel to a 2-ohm load for maximum power delivery from a compatible high-output mono amplifier, or in series for an 8-ohm load for specific system configurations. Grille and integral trim ring included. Key Specifications Driver size: 12" Voice coil configuration: Dual 4-ohm (DVC) Wiring options: 2 ohm (parallel) / 8 ohm (series) Power handling: 800W RMS / 1600W peak Technology: Patented VAST up to 25% increased cone surface area Basket: FlexFit rigid die-cast aluminium Cone: Kevlar fibre reinforced paper Voice coil former: Anodized aluminium with copper-clad aluminium wire Voice coil reinforcement: Spun-laced Nomex collar (high-temp) Dust cap: Anodized aluminium heat-sinking Input terminals: Proprietary 8 AWG insulated all-metal spring terminals Spiders: Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel leads: Periodic-stitched fatigue-resistant Grille: Included with integral trim ring Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Patented VAST technology up to 25% more cone surface area: VAST (Vertical Attach Surround Technique) repositions the surround attachment point to reclaim up to 25% of the cone area traditionally covered by the surround, delivering more effective piston area than a conventional 12" driver moving more air and producing more bass output per watt from the same basket diameter. FlexFit rigid die-cast aluminium basket: Precision-cast for structural rigidity with installation geometry flexibility for custom fabrication and extreme builds where standard basket angles create clearance issues with the enclosure or vehicle structure. Purpose-built for serious Australian car and truck audio installations. 800W RMS / 1600W peak power handling: The T1D412 handles 200W RMS less than the T1 15" models, reflecting the smaller cone area, while remaining firmly in high-output territory suited to the most powerful 12"-oriented mono amplifiers in the Rockford Fosgate Power series. Dual 4-ohm voice coils 2-ohm parallel or 8-ohm series wiring: Wired in parallel, the T1D412 presents a 2-ohm load for maximum power delivery from a 2-ohm stable mono amplifier. Wired in series, it presents an 8-ohm load for specific bridged or multi-driver configurations. Choose the T1D412 when a 2-ohm stable amplifier pairing is the system target. High-temp voice coil with spun-laced Nomex reinforcement collar: Nomex reinforcement at the critical former-to-cone junction prevents delamination and separation under sustained high-power, high-excursion use at 800W RMS continuous input a key reliability differentiator from lesser 12" drivers at this power level. Anodized aluminium voice coil former with copper-clad aluminium wire: Superior heat dissipation versus paper or plastic formers, extending voice coil life under sustained high-power use in the high-temperature boot environments common in Australian vehicles during summer. Copper-clad aluminium winding reduces moving mass while maintaining conductivity, improving transient response and efficiency. Kevlar fibre reinforced paper cone: Kevlar adds stiffness and break-up resistance without excessive weight, maintaining accurate pistonic motion across the full excursion range at 800W RMS where an unreinforced paper cone would begin to flex and distort. Anodized aluminium heat-sinking dust cap: Acts as an active heat sink during sustained high-power use, drawing thermal energy away from the pole piece and voice coil gap directly contributing to long-term reliability at the power levels the T1D412 is rated to handle. Optimised pole piece and spider venting: Internal air channels reduce compression behind the cone at high excursion levels, improving linearity and bass accuracy at the displacement levels an 800W RMS 12" driver routinely operates at. Proprietary 8 AWG insulated all-metal spring input terminals: Heavy-gauge terminals appropriate for the high current demands of an 800W RMS, 2-ohm system. All-metal construction ensures reliable, corrosion-resistant connections over the long term. Symmetrical dual progressive roll poly-cotton spiders: Dual spider configuration provides linear restoring force symmetry across the full excursion range, reducing harmonic distortion and maintaining voice coil alignment at high displacement levels. Periodic-stitched fatigue-resistant tinsel leads: Periodic stitching distributes flex stress along a longer lead length, significantly extending tinsel lead fatigue life at the sustained high-excursion levels the T1D412 is designed to operate at. Grille and integral trim ring included: Ships complete with protective grille and trim ring for a finished, professional installation appearance without requiring a separately purchased grille. Technical Specs Specification Detail SKU T1D412 Brand Rockford Fosgate Driver Size 12" Voice Coil Configuration Dual 4-ohm (DVC) Wiring Options 2 ohm (parallel) / 8 ohm (series) Power Handling 800W RMS / 1600W peak Technology Patented VAST up to 25% increased cone surface area Basket FlexFit rigid die-cast aluminium Cone Kevlar fibre reinforced paper Dust Cap Anodized aluminium heat-sinking Voice Coil Former Anodized aluminium Voice Coil Wire Copper-clad aluminium Voice Coil Reinforcement Spun-laced Nomex collar (high-temp) Spiders Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel Leads Periodic-stitched fatigue-resistant Input Terminals Proprietary 8 AWG insulated all-metal spring terminals Grille Included with integral trim ring Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 2 ohms (parallel wiring) rated at or near 800W RMS Mono amplifiers stable at 8 ohms (series wiring) for specific system configurations Rockford Fosgate Power T1 and T2 series mono amplifiers Custom ported and sealed enclosures designed for the T1D412 confirm recommended enclosure specifications with Rockford Fosgate documentation before building Rockford Fosgate 8 AWG and heavy-gauge wiring kits for high-current 2-ohm installations Rockford Fosgate RCA cables and signal processors for high-output system integration Competition and show car audio builds requiring a flagship 12" 2-ohm stable driver Australian vehicles where 12" driver diameter fits available enclosure space more practically than 15" Frequently Asked Questions What is the difference between the T1D412 and the T1 15" models? The T1D412 shares the same VAST technology, FlexFit basket, Kevlar cone, Nomex voice coil, and construction standard as the T1D415 and T1D215. The key differences are driver size (12" vs 15") and power handling (800W RMS vs 1000W RMS). The T1D412 suits builds where a 12" format is preferred for enclosure size, vehicle fitment, or system balance reasons. What is the difference between the T1D412 and T1D212? Both are 12" Power T1 subwoofers with identical 800W RMS power handling, VAST technology, FlexFit basket, and construction. The T1D412 has dual 4-ohm coils (2-ohm parallel / 8-ohm series), while the T1D212 has dual 2-ohm coils (1-ohm parallel / 4-ohm series). Choose the T1D412 for 2-ohm stable amplifier pairings; choose the T1D212 for 1-ohm stable amplifier pairings. What impedance does the T1D412 present to the amplifier? The T1D412 has dual 4-ohm voice coils. Wired in parallel, it presents a 2-ohm load the standard configuration for maximising power from a 2-ohm stable high-output mono amplifier. Wired in series, it presents an 8-ohm load. Confirm your amplifier's stable impedance rating before wiring. What enclosure does the T1D412 require? The T1D412 requires a custom or aftermarket enclosure. Rockford Fosgate publishes recommended sealed and ported enclosure specifications for the T1D412 confirm these with official documentation or a qualified installer before designing or building an enclosure. Does the T1D412 include a grille? Yes. The T1D412 ships with a grille and integral trim ring included, providing a finished, professional installation appearance without requiring a separately purchased grille. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1D410 Power 10" T1 Dual 4-Ohm Subwoofer 600 Watts, VAST Technology, T1 Performance in 10" Product Overview The Rockford Fosgate T1D410 is a 10" dual 4-ohm voice coil subwoofer from the flagship Power T1 series, rated at 600 Watts RMS and 1200 Watts peak. Carrying the full Power T1 technology stack into the 10" format, the T1D410 delivers the same patented VAST cone technology, FlexFit die-cast aluminium basket, Kevlar fibre reinforced paper cone, Nomex-reinforced high-temp voice coil, and anodized aluminium construction as the T1 12" and 15" models in the most compact T1 driver size available, suited to enclosure and vehicle builds where 12" or 15" diameter is impractical. Patented VAST (Vertical Attach Surround Technique) technology increases effective cone surface area by up to 25% over a conventional surround attachment, allowing the T1D410 to deliver more bass output per watt than a standard 10" driver punching well above its physical size. The dual 4-ohm configuration wires in parallel to a 2-ohm load for maximum power delivery from a compatible high-output mono amplifier, or in series for an 8-ohm load for specific system configurations. Grille and integral trim ring included. Key Specifications Driver size: 10" Voice coil configuration: Dual 4-ohm (DVC) Wiring options: 2 ohm (parallel) / 8 ohm (series) Power handling: 600W RMS / 1200W peak Technology: Patented VAST up to 25% increased cone surface area Basket: FlexFit rigid die-cast aluminium Cone: Kevlar fibre reinforced paper Voice coil former: Anodized aluminium with copper-clad aluminium wire Voice coil reinforcement: Spun-laced Nomex collar (high-temp) Dust cap: Anodized aluminium heat-sinking Input terminals: Proprietary 8 AWG insulated all-metal spring terminals Spiders: Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel leads: Periodic-stitched fatigue-resistant Grille: Included with integral trim ring Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Patented VAST technology up to 25% more cone surface area: VAST (Vertical Attach Surround Technique) repositions the surround attachment point to reclaim up to 25% of the cone area traditionally covered by the surround. In a 10" driver where every square centimetre of piston area counts, this technology delivers meaningfully more output per watt than a conventional 10" design performing like a larger woofer from the same basket diameter. FlexFit rigid die-cast aluminium basket: Precision-cast for structural rigidity with installation geometry flexibility for custom fabrication and extreme builds where standard basket angles create clearance issues. The most practical basket design in the T1 range for compact enclosures and tight vehicle installations common in Australian hatchbacks, sedans, and utes. 600W RMS / 1200W peak power handling: High-output power handling in a 10" format. Suited to high-performance builds where 10" driver diameter is preferred for enclosure efficiency, vehicle fitment, or SPL output characteristics in smaller sealed or ported enclosures. Dual 4-ohm voice coils 2-ohm parallel or 8-ohm series wiring: Wired in parallel, the T1D410 presents a 2-ohm load for maximum power delivery from a 2-ohm stable mono amplifier. Wired in series, it presents an 8-ohm load for specific bridged or multi-driver configurations. Choose the T1D410 when a 2-ohm stable amplifier pairing is the system target. High-temp voice coil with spun-laced Nomex reinforcement collar: Nomex reinforcement at the critical former-to-cone junction prevents delamination under sustained 600W RMS, high-excursion use maintaining structural integrity at the power levels a T1 10" is designed to handle continuously. Anodized aluminium voice coil former with copper-clad aluminium wire: Superior heat dissipation compared to paper or plastic formers. Copper-clad aluminium winding reduces moving mass while maintaining conductivity, improving transient response and efficiency particularly beneficial in a 10" driver where cone mass directly affects high-frequency bass extension and punch. Kevlar fibre reinforced paper cone: Stiffness and break-up resistance without excessive weight. Maintains accurate pistonic motion at the high excursion levels a 600W RMS 10" driver operates at, where an unreinforced cone would distort and lose accuracy. Anodized aluminium heat-sinking dust cap: Active heat sink during sustained high-power use, drawing thermal energy away from the pole piece and voice coil gap contributing directly to long-term reliability in compact, sealed enclosure environments where heat buildup is accelerated. Optimised pole piece and spider venting: Internal air channels reduce compression behind the cone at high excursion levels, improving linearity and bass accuracy particularly important in compact sealed enclosures where back-pressure management is critical. Proprietary 8 AWG insulated all-metal spring input terminals: Heavy-gauge terminals appropriate for the current demands of a 600W RMS, 2-ohm system. Consistent with the terminal standard across the entire Power T1 subwoofer range. Symmetrical dual progressive roll poly-cotton spiders: Dual spider configuration provides linear restoring force symmetry across the full excursion range, reducing harmonic distortion and maintaining voice coil alignment at high displacement levels. Periodic-stitched fatigue-resistant tinsel leads: Periodic stitching distributes flex stress along a longer lead length, extending tinsel lead fatigue life at the sustained high-excursion levels the T1D410 is designed for. Grille and integral trim ring included: Ships complete with protective grille and trim ring for a finished, professional installation appearance. Technical Specs Specification Detail SKU T1D410 Brand Rockford Fosgate Driver Size 10" Voice Coil Configuration Dual 4-ohm (DVC) Wiring Options 2 ohm (parallel) / 8 ohm (series) Power Handling 600W RMS / 1200W peak Technology Patented VAST up to 25% increased cone surface area Basket FlexFit rigid die-cast aluminium Cone Kevlar fibre reinforced paper Dust Cap Anodized aluminium heat-sinking Voice Coil Former Anodized aluminium Voice Coil Wire Copper-clad aluminium Voice Coil Reinforcement Spun-laced Nomex collar (high-temp) Spiders Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel Leads Periodic-stitched fatigue-resistant Input Terminals Proprietary 8 AWG insulated all-metal spring terminals Grille Included with integral trim ring Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 2 ohms (parallel wiring) rated at or near 600W RMS Mono amplifiers stable at 8 ohms (series wiring) for specific system configurations Rockford Fosgate Power T1 and T2 series mono amplifiers Compact sealed and ported enclosures designed for the T1D410 confirm recommended enclosure specifications with Rockford Fosgate documentation before building Rockford Fosgate 8 AWG and heavy-gauge wiring kits for high-current 2-ohm installations Rockford Fosgate RCA cables and signal processors for high-output system integration Australian vehicles where 10" driver diameter is preferred for compact enclosure fitment: sedans, hatchbacks, SUVs, and utes with limited boot depth Frequently Asked Questions What is the difference between the T1D410 and the T1 12" and 15" models? The T1D410 shares the same VAST technology, FlexFit basket, Kevlar cone, Nomex voice coil, and construction standard as the T1D412, T1D415, and T1D215. The key differences are driver size and power handling 10" at 600W RMS versus 12" at 800W RMS and 15" at 1000W RMS. Choose the T1D410 when a 10" format suits your enclosure design or vehicle fitment requirements. What is the difference between the T1D410 and T1D210? Both are 10" Power T1 subwoofers with identical 600W RMS power handling, VAST technology, FlexFit basket, and construction. The T1D410 has dual 4-ohm coils (2-ohm parallel / 8-ohm series), while the T1D210 has dual 2-ohm coils (1-ohm parallel / 4-ohm series). Choose the T1D410 for 2-ohm stable amplifier pairings; choose the T1D210 for 1-ohm stable amplifier pairings. What impedance does the T1D410 present to the amplifier? The T1D410 has dual 4-ohm voice coils. Wired in parallel, it presents a 2-ohm load the standard configuration for maximising power from a 2-ohm stable high-output mono amplifier. Wired in series, it presents an 8-ohm load. Confirm your amplifier's stable impedance rating before wiring. What enclosure does the T1D410 require? The T1D410 requires a custom or aftermarket enclosure. Rockford Fosgate publishes recommended sealed and ported enclosure specifications for the T1D410 confirm these with official documentation or a qualified installer before designing or building an enclosure. Does the T1D410 include a grille? Yes. The T1D410 ships with a grille and integral trim ring included, providing a finished, professional installation appearance without requiring a separately purchased grille. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T1D210 Power 10" T1 Dual 2-Ohm Subwoofer 600 Watts, VAST Technology, 1-Ohm Ready in 10" Product Overview The Rockford Fosgate T1D210 is a 10" dual 2-ohm voice coil subwoofer from the flagship Power T1 series, rated at 600 Watts RMS and 1200 Watts peak. The 1-ohm stable counterpart to the T1D410, the T1D210 carries the complete Power T1 technology package patented VAST cone technology, FlexFit die-cast aluminium basket, Kevlar fibre reinforced paper cone, Nomex-reinforced high-temp voice coil, and anodized aluminium construction in the most compact T1 driver size available, with dual 2-ohm voice coils that wire in parallel to a 1-ohm load for maximum power extraction from 1-ohm stable mono amplifiers. For builds where a 1-ohm stable high-output mono amplifier is already specified and a 10" driver format is preferred for enclosure efficiency or vehicle fitment, the T1D210 is the direct T1 choice. All construction, technology, and performance specifications are identical to the T1D410 the sole differentiator is voice coil impedance and the resulting wiring options. Grille and integral trim ring included. Key Specifications Driver size: 10" Voice coil configuration: Dual 2-ohm (DVC) Wiring options: 1 ohm (parallel) / 4 ohm (series) Power handling: 600W RMS / 1200W peak Technology: Patented VAST up to 25% increased cone surface area Basket: FlexFit rigid die-cast aluminium Cone: Kevlar fibre reinforced paper Voice coil former: Anodized aluminium with copper-clad aluminium wire Voice coil reinforcement: Spun-laced Nomex collar (high-temp) Dust cap: Anodized aluminium heat-sinking Input terminals: Proprietary 8 AWG insulated all-metal spring terminals Spiders: Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel leads: Periodic-stitched fatigue-resistant Grille: Included with integral trim ring Frequency response: Confirm with supplier Sensitivity: Confirm with supplier Xmax: Confirm with supplier Mounting depth: Confirm with supplier Cutout diameter: Confirm with supplier Features & Benefits Dual 2-ohm voice coils 1-ohm parallel or 4-ohm series wiring: The key differentiator from the T1D410. Wiring the dual 2-ohm coils in parallel presents a 1-ohm load extracting maximum rated power from 1-ohm stable mono amplifiers. Wired in series, it presents a 4-ohm load for specific bridged or multi-driver configurations. Choose the T1D210 when your amplifier is 1-ohm stable and 1-ohm wiring is the system target. Patented VAST technology up to 25% more cone surface area: VAST (Vertical Attach Surround Technique) repositions the surround attachment point to reclaim up to 25% of the cone area traditionally covered by the surround. In a 10" driver where piston area is at a premium, this technology is particularly impactful delivering meaningfully more output per watt and performing like a larger woofer from the same basket diameter. FlexFit rigid die-cast aluminium basket: Precision-cast for structural rigidity with installation geometry flexibility for custom fabrication and compact vehicle builds where standard basket angles create clearance issues. Ideal for Australian hatchbacks, sedans, and utes where enclosure space is at a premium. 600W RMS / 1200W peak power handling: Identical to the T1D410, the T1D210 handles 600W RMS continuously in a 10" format the most powerful 10" T1 option available from Rockford Fosgate, suited to high-performance builds where compact enclosure size and high power handling are both required. High-temp voice coil with spun-laced Nomex reinforcement collar: Nomex reinforcement at the critical former-to-cone junction prevents delamination under sustained 600W RMS, high-excursion use in compact sealed or ported enclosures where thermal stress is concentrated. Anodized aluminium voice coil former with copper-clad aluminium wire: Superior heat dissipation versus paper or plastic formers, critical for a 600W RMS 10" driver operating in a compact enclosure where heat accumulates more rapidly than in larger enclosure volumes. Copper-clad aluminium winding reduces moving mass, improving transient response and punch. Kevlar fibre reinforced paper cone: Stiffness and break-up resistance without excessive weight, maintaining accurate pistonic motion at the high excursion levels a 600W RMS 10" driver operates at. Anodized aluminium heat-sinking dust cap: Active heat sink drawing thermal energy away from the pole piece and voice coil gap during sustained high-power use directly contributing to long-term reliability in compact enclosure environments where heat management is critical. Optimised pole piece and spider venting: Internal air channels reduce compression behind the cone at high excursion levels, improving linearity and bass accuracy particularly beneficial in compact sealed enclosures where back-pressure management directly affects performance. Proprietary 8 AWG insulated all-metal spring input terminals: Heavy-gauge terminals consistent with the Power T1 range standard, appropriate for the high current demands of a 600W RMS, 1-ohm system. Symmetrical dual progressive roll poly-cotton spiders: Dual spider configuration provides linear restoring force symmetry, reducing harmonic distortion and maintaining voice coil alignment at high displacement levels. Periodic-stitched fatigue-resistant tinsel leads: Periodic stitching distributes flex stress along a longer lead length, extending fatigue life at the sustained high-excursion levels the T1D210 is designed for. Grille and integral trim ring included: Ships complete with protective grille and trim ring for a finished, professional installation appearance. Technical Specs Specification Detail SKU T1D210 Brand Rockford Fosgate Driver Size 10" Voice Coil Configuration Dual 2-ohm (DVC) Wiring Options 1 ohm (parallel) / 4 ohm (series) Power Handling 600W RMS / 1200W peak Technology Patented VAST up to 25% increased cone surface area Basket FlexFit rigid die-cast aluminium Cone Kevlar fibre reinforced paper Dust Cap Anodized aluminium heat-sinking Voice Coil Former Anodized aluminium Voice Coil Wire Copper-clad aluminium Voice Coil Reinforcement Spun-laced Nomex collar (high-temp) Spiders Symmetrical dual progressive roll tear-resistant poly-cotton Tinsel Leads Periodic-stitched fatigue-resistant Input Terminals Proprietary 8 AWG insulated all-metal spring terminals Grille Included with integral trim ring Frequency Response Confirm with supplier Sensitivity Confirm with supplier Xmax Confirm with supplier Mounting Depth Confirm with supplier Cutout Diameter Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With High-output mono amplifiers stable at 1 ohm (parallel wiring) rated at or near 600W RMS Mono amplifiers stable at 4 ohms (series wiring) for specific system configurations Rockford Fosgate Power T1 and T2 series mono amplifiers Compact sealed and ported enclosures designed for the T1D210 confirm recommended enclosure specifications with Rockford Fosgate documentation before building Rockford Fosgate 8 AWG and heavy-gauge wiring kits for high-current 1-ohm installations Rockford Fosgate RCA cables and signal processors for high-output system integration Australian vehicles where 10" driver diameter is preferred for compact enclosure fitment and a 1-ohm stable amplifier is in the system Frequently Asked Questions What is the difference between the T1D210 and T1D410? Both are 10" Power T1 subwoofers with identical 600W RMS power handling, VAST technology, FlexFit basket, and construction. The T1D210 has dual 2-ohm coils (1-ohm parallel / 4-ohm series), while the T1D410 has dual 4-ohm coils (2-ohm parallel / 8-ohm series). Choose the T1D210 for 1-ohm stable amplifier pairings; choose the T1D410 for 2-ohm stable amplifier pairings. What impedance does the T1D210 present to the amplifier? The T1D210 has dual 2-ohm voice coils. Wired in parallel, it presents a 1-ohm load the standard configuration for maximising power from a 1-ohm stable high-output mono amplifier. Wired in series, it presents a 4-ohm load. Confirm your amplifier's stable impedance rating before wiring. How does the T1D210 compare to the T1 12" and 15" models? The T1D210 shares the same full T1 technology stack as the T1D412, T1D215, and T1D415. The differences are driver size and power handling 10" at 600W RMS versus 12" at 800W RMS and 15" at 1000W RMS. Choose the T1D210 when a compact 10" format and 1-ohm amplifier pairing are both required. What enclosure does the T1D210 require? The T1D210 requires a custom or aftermarket enclosure. Rockford Fosgate publishes recommended sealed and ported enclosure specifications for the T1D210 confirm these with official documentation or a qualified installer before designing or building an enclosure. Does the T1D210 include a grille? Yes. The T1D210 ships with a grille and integral trim ring included, providing a finished, professional installation appearance without requiring a separately purchased grille. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6"×8" 2-Way Power Series Coaxial 80W RMS, Carbon Fibre Composite Cone, Aluminium Dome Tweeter, ICC Crossover. Product Overview The Rockford Fosgate Power T1682 is a 6"×8" oval 2-way coaxial speaker rated at 80W RMS a high-powered OEM replacement for vehicles with 6"×8" factory speaker positions. The supplier description confirms integrated concealed crossovers and mounting hardware are included; neither an OEM adapter plate nor grilles are referenced in the kit description for this model. The T1682 uses the Power series construction platform: a carbon fibre and polypropylene injection-moulded composite cone, an aluminium dome tweeter with polyurethane suspension, a butyl rubber surround, and an ICC (Integrated Concealed Crossover). Technical specifications impedance, sensitivity, frequency response, mounting depth, and crossover details are not provided in the supplier data. Key Specifications Speaker size: 6"×8" (oval) Configuration: 2-way coaxial Power handling (RMS): 80W per speaker (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Tweeter: Aluminium dome, polyurethane suspension (size not specified) Crossover: ICC (Integrated Concealed Crossover) — slope not confirmed Cone: Carbon fibre and polypropylene injection-moulded composite Surround: Butyl rubber Basket: Not specified — confirm with Rockford Fosgate OEM adapter plate: Not mentioned in kit description — confirm with Rockford Fosgate Grilles: Not confirmed in supplier description — confirm with Rockford Fosgate Mounting hardware: Included Sold as: Pair (2 speakers — confirmed in description) CEA-2031 compliant: Not stated — confirm with Rockford Fosgate Cutout dimensions: Not specified — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 80W RMS Power Handling — 80W RMS is confirmed per speaker — a substantial continuous power rating for a 6"×8" oval driver, providing significant headroom for amplified installation with Rockford Fosgate's T-series 4-channel amplifiers. Carbon Fibre and Polypropylene Composite Cone — The injection-moulded composite combines carbon fibre's high stiffness and low mass with polypropylene's moisture resistance — producing a lighter, stiffer diaphragm than standard polypropylene for improved midrange accuracy and transient response. Aluminium Dome Tweeter with Polyurethane Suspension — An aluminium dome tweeter delivers fast, detailed high-frequency output. The polyurethane suspension provides controlled damping — producing refined treble without the metallic resonance that can affect undamped aluminium domes. ICC — Integrated Concealed Crossover — Crossover circuitry built directly into the tweeter assembly, eliminating any external crossover component. Crossover slope and frequency are not confirmed in the supplier data — pull from the official Rockford Fosgate T1682 datasheet. Butyl Rubber Surround — UV and heat-resistant synthetic rubber for long-term durability in Australian vehicle conditions. Technical Specs Specification Detail Brand Rockford Fosgate Part Number T1682 Series Power Speaker Size 6"×8" (oval) Configuration 2-Way Coaxial Power Handling (RMS) 80W per speaker ✓ Peak Power Not specified — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Mounting Depth Not specified — confirm with Rockford Fosgate Tweeter Aluminium Dome, Polyurethane Suspension (size TBC) Crossover ICC — slope not confirmed Cone Carbon Fibre & Polypropylene Composite Surround Butyl Rubber Basket Not specified — confirm with Rockford Fosgate OEM Adapter Plate Not mentioned — confirm with Rockford Fosgate Grilles Not confirmed — confirm with Rockford Fosgate Mounting Hardware Included ✓ Sold As Pair (2 speakers) ✓ CEA-2031 Compliant Not confirmed Cutout Dimensions Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions: Factory 6"×8" oval speaker positions — common in Ford, Mazda, and selected other vehicles Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer for bass below the 6"×8" driver's confirmed lower frequency limit (TBC) Frequently Asked Questions What vehicles use a 6"×8" oval speaker? The 6"×8" oval is common in Ford Falcon, Ford Focus, Ford Territory, Mazda 3, Mazda 6, and various other Ford and Mazda platform vehicles. Always confirm your vehicle's speaker format using a vehicle-specific fit guide or the Rockford Fosgate fit guide before purchasing. Are grilles and an adapter plate included with the T1682? The supplier description for the T1682 does not reference grilles or an OEM adapter plate — unlike some other Power series models where these are confirmed. Confirm with Rockford Fosgate before purchasing whether grilles and an adapter plate are included in the T1682 kit. What technical specifications are confirmed for the T1682? 80W RMS power handling, carbon fibre composite cone, aluminium dome tweeter with polyurethane suspension, ICC crossover, butyl rubber surround, and sold as a pair are confirmed. Impedance, sensitivity, frequency response, mounting depth, and crossover specification must be pulled from the official Rockford Fosgate T1682 datasheet before publishing. Is the T1682 suitable for a standard round 6.5" speaker position? No — the T1682 is an oval 6"×8" speaker. It is not interchangeable with round 6.5" or 6.75" speaker positions without an adaptor. Confirm your vehicle's speaker format before purchasing. What is the difference between the T1682's 80W RMS and a peak power figure? RMS (Root Mean Square) is the sustained continuous power the speaker can safely handle over time — the relevant figure for amplifier matching and long-term operation. Peak power is the brief transient power the speaker can handle during dynamic programme peaks. Always match amplifier output to the speaker's RMS rating, not a peak figure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less