12/24V Amber Side Marker Lamp 74x38mm, 5-Year Warranty Product Overview The LED Autolamps 1458AM is a 12/24V amber side marker lamp in the same 74mm x 38mm rectangular form factor as the rest of the 1458 series. With an amber lens delivering correct amber side marker output, it suits trailers, trucks, and commercial vehicles requiring a compact, reliable lateral visibility lamp. Compatible with both 12V and 24V electrical systems and backed by a 5-year warranty. Features & Benefits Amber LED output — delivers correct amber side marker output for lateral visibility on trailers and commercial vehicles 74mm x 38mm compact form factor — suits a wide range of trailer and truck body side panel installations 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 1458AM Lamp Type Side Marker LED Colour Amber Lens Colour Amber Voltage Range 12V / 24V Length 74mm Width 38mm Warranty 5 years Weight 0.3 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring amber side marker lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 1458RM red side marker lamp (same 74x38mm form factor) LED Autolamps 1458ARM red/amber side marker lamp (same form factor) LED Autolamps 1458WM front marker lamp (same form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 1458AM suitable for road use in Australia? The 1458AM is a side marker lamp in the LED Autolamps range — confirm ADR or ECE road approval status with F.A.E. or LED Autolamps before use on public roads. How does the 1458AM differ from the 1458ARM? The 1458AM outputs amber only, while the 1458ARM combines red and amber LEDs for dual-colour side marker applications. Choose the 1458AM where amber-only output is required. How does the 1458AM differ from the 1458RM? The 1458AM is an amber side marker; the 1458RM is a red side marker. Both share the same 74mm x 38mm form factor and 5-year warranty. Does the 1458AM work on both 12V and 24V systems? Yes. It operates across 12V to 24V, making it compatible with light vehicles as well as 24V heavy transport applications. What warranty does the 1458AM carry? The 1458AM is backed by a 5-year warranty from LED Autolamps. Weight 0.3 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 1/00 Approved 35 SMD Reverse Lamp Surface or Recessed Mount, Black Base, IP67 Product Overview The LED Autolamps 135WM is a 12/24V reverse lamp fitted with 35 SMD LEDs in a rectangular black base housing, offering both surface mount and recessed mount installation options. Measuring 135mm x 38mm (lamp) or 145mm x 48mm (overall with bracket), it draws just 0.16A at 13.8V and is pre-wired with a 0.4m cable lead. ADR 1/00 approved and rated IP67, supplied in blister packaging and backed by a 5-year warranty. Features & Benefits 35 SMD LEDs — delivers bright, consistent white reverse output across the full rectangular lamp face Surface or recessed mount — flexible installation suits a wide range of trailer and truck body panel configurations ADR 1/00 approved — meets Australian Design Rules for legal on-road use as a reverse lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Black base — clean, professional finish suits a wide range of trailer and vehicle body aesthetics Low current draw — 0.16A at 13.8V for efficient operation in multi-lamp trailer builds 0.4m pre-wired cable — ready to connect straight out of the blister pack 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 135WM Lamp Type Reverse LED Configuration 35 SMD Voltage Range 12V / 24V Lamp Dimensions 135mm x 38mm x 24mm Overall Dimensions 145mm x 48mm x 10mm Current Draw 0.16A @ 13.8V Cable Length 0.4m Housing Colour Black Mounting Surface or recessed Protection Rating IP67 Compliance ADR 1/00 Packaging Blister pack Warranty 5 years Weight 0.2 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring surface or recessed reverse lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved reverse lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 135WM approved for road use in Australia? Yes. The LED Autolamps 135WM is ADR 1/00 approved, meeting Australian Design Rules requirements for legal on-road use as a reverse lamp. What mounting options does the 135WM support? The 135WM can be installed as either a surface mount or recessed mount, offering flexibility to suit different trailer and truck body panel configurations. What is the current draw of the 135WM? The 135WM draws 0.16A at 13.8V, making it one of the more efficient reverse lamp options in the LED Autolamps range — useful for multi-lamp builds where total current draw is a consideration. What is the IP rating on the 135WM? The 135WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 135WM carry? The 135WM is backed by a 5-year warranty from LED Autolamps. Weight 0.2 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 8 Square LED Stop/Tail Lamp Surface Mount, Black Base, IP67, 5-Year Warranty Product Overview The LED Autolamps 135RM is a 12/24V stop/tail lamp fitted with 8 square LEDs in a rectangular black base housing, designed for surface mounting on trailers, trucks, and commercial vehicles. Measuring 135mm x 38mm x 24mm, it shares the same compact rectangular form factor as the 135WM reverse lamp suited to builds where a matched, low-profile rear lighting set is required. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits 8 square LEDs — distinctive square LED array delivers strong, consistent red stop/tail output across the rectangular lamp face Surface mount — straightforward installation on trailer and truck body rear panels ADR road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Black base — clean, professional finish suits a wide range of trailer and vehicle body aesthetics 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 135RM Lamp Type Stop / Tail LED Configuration 8 square LEDs Voltage Range 12V / 24V Dimensions 135mm x 38mm x 24mm Housing Colour Black Mounting Surface mount Protection Rating IP67 Compliance ADR Packaging Blister pack Warranty 5 years Weight 0.2 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring rectangular surface-mount stop/tail lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail lighting LED Autolamps 135WM reverse lamp (same 135mm x 38mm rectangular form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 135RM approved for road use in Australia? Yes. The LED Autolamps 135RM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. What makes the square LED array different from standard LEDs? The 8 square LEDs produce a distinctive, evenly distributed pattern across the lamp face, giving the 135RM a recognisable appearance compared to round LED arrays in standard trailer lamps. How does the 135RM match with the 135WM reverse lamp? Both share the same 135mm x 38mm x 24mm black housing form factor, making them a natural matched pair for stop/tail and reverse functions on the same trailer or truck body. What is the IP rating on the 135RM? The 135RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 135RM carry? The 135RM is backed by a 5-year warranty from LED Autolamps. Weight 0.2 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12/24V Stop/Tail/Reflector Lamp 4 LEDs, Red Lens, Grommet and Plug Included Product Overview The LED Autolamps 133RMG is a 12/24V LED stop/tail lamp with built-in reflector, fitted with 4 LEDs behind a red lens and supplied with a rubber grommet and plug for a complete, sealed recessed installation. Measuring 133mm x 160mm x 12mm, it's the grommet-equipped counterpart to the 133RMB and the stop/tail companion to the 133AMG indicator lamp. ECE approved, IP67 rated, and backed by a 5-year warranty. Available in both blister pack and bulk pack formats. Features & Benefits 4 LEDs with red lens — delivers correct red stop/tail output for rear stop and tail light applications Built-in reflector — integrated passive reflector adds rear visibility and compliance without a separate reflector unit Rubber grommet and plug included — complete sealed installation kit for a weatherproof recessed fit straight out of the pack Low-profile recessed mount — 12mm depth sits flush with the panel for a clean, integrated finish ECE approved — meets international road approval standards for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 133RMG Lamp Type Stop / Tail / Reflector LED Quantity 4 Lens Colour Red Voltage Range 12V / 24V Dimensions 133mm x 160mm x 12mm Reflector Built-in Included Accessories Rubber grommet, plug Mounting Low-profile recessed Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed stop/tail lamps with grommet 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE-approved stop/tail lighting LED Autolamps 133RMB stop/tail lamp (same series, without grommet) LED Autolamps 133AMG amber indicator lamp with grommet (same series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 133RMG approved for road use in Australia? Yes. The 133RMG is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as a stop/tail lamp. What accessories are included with the 133RMG? The pack includes a rubber grommet and plug for a complete, sealed recessed installation straight out of the pack. What is the difference between the 133RMG and the 133RMB? The 133RMG includes a rubber grommet and plug for a sealed recessed installation, while the 133RMB is supplied without these accessories. Both are ECE-approved 12/24V stop/tail lamps in the 133 series with a built-in reflector. What is the IP rating on the 133RMG? The 133RMG is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 133RMG carry? The 133RMG is backed by a 5-year warranty from LED Autolamps.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Reverse Lamp with Grommet and Plug Recessed Mount, IP67 Product Overview The LED Autolamps 130WMG is a 12/24V LED reverse lamp supplied with a grommet and plug for a complete, sealed recessed installation. Mounted via two screws and rated IP67, it delivers ADR-approved reverse light output for trailers, trucks, and commercial vehicles completing the 130 series alongside the 130AMG indicator and 130RMG stop/tail lamps for a fully matched grommet-mount rear lighting set. Drawing just 0.15A at 13.8V and backed by a 5-year warranty. Features & Benefits Grommet and plug included — complete sealed installation kit for a weatherproof recessed fit straight out of the blister pack Recessed mount — sits flush with the panel for a clean, integrated finish on trailer and truck body panels 2-screw mount — secure, stable installation using two screws through the mounting panel ADR road approved — meets Australian Design Rules for legal on-road use as a reverse lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Low current draw — 0.15A at 13.8V for efficient operation across multi-lamp trailer builds 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 130WMG Lamp Type Reverse Voltage Range 12V / 24V Current Draw 0.15A @ 13.8V Mounting Recessed, 2-screw Included Accessories Grommet, plug Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed reverse lamps with grommet 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved reverse lighting LED Autolamps 130AMG indicator lamp (same 130 series with grommet) LED Autolamps 130RMG stop/tail lamp (same 130 series with grommet) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 130WMG approved for road use in Australia? Yes. The LED Autolamps 130WMG is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a reverse lamp. What accessories are included with the 130WMG? The pack includes a grommet and plug, providing everything needed for a complete, sealed recessed installation straight out of the pack. How does the 130WMG complete the 130 series? The 130WMG is the reverse lamp in the 130 grommet-mount series, pairing with the 130AMG indicator and 130RMG stop/tail lamps for a fully matched rear lighting set across all three functions. What is the IP rating on the 130WMG? The 130WMG is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 130WMG carry? The 130WMG is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/CTA Approved 12/24V Stop/Tail Lamp Twin Pack Clear Lens, 8mm Ultra-Slim, IP67 Product Overview The LED Autolamps 12RCM-2 is a 12/24V stop/tail lamp with a clear lens, supplied as a twin blister pack for a complete left and right rear installation. Measuring 131mm x 30mm x 8mm, the ultra-slim 8mm profile mounts via 3M adhesive tape or screws suited to trailers, caravans, trucks, and commercial vehicles where a discreet, low-profile stop/tail solution is required. ECE and CTA approved, IP67 rated, and backed by a 5-year warranty. The clear lens presents a clean appearance when inactive, with red stop/tail output activating when the lamp is energised. Pairs naturally with the 12ACM-2 indicator lamp for a matched clear lens rear lighting set. Features & Benefits Twin blister pack — two lamps supplied for a complete left and right rear stop/tail installation in a single purchase Clear lens — clean, colourless appearance when inactive; red stop/tail output activates when the lamp is energised Ultra-slim 8mm profile — low-profile design suits tight installation spaces on trailer, caravan, and truck body panels 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation on a wide range of surfaces ECE and CTA approved — meets international and Australian road approval standards for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 12RCM-2 Pack Contents 2 lamps Lamp Type Stop / Tail Lens Colour Clear Voltage Range 12V – 24V Dimensions 131mm x 30mm x 8mm Mounting 3M tape / screw Protection Rating IP67 Approval ECE, CTA Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring low-profile stop/tail lamps 12V light vehicles and 24V heavy transport applications Installations requiring flexible mounting orientation or adhesive fitting LED Autolamps 12ACM-2 clear lens indicator lamp (matching clear lens and form factor) LED Autolamps 12ARM-2 stop/tail/indicator lamp pair (same 12 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What is included in the 12RCM-2 twin blister pack? The pack contains two lamps, providing a complete left and right rear stop/tail installation in a single purchase. What does the clear lens look like when inactive? When not energised, the lens appears clear and colourless. The red stop/tail output is produced by the LEDs and only becomes visible when the lamp is activated. What mounting options does the 12RCM-2 support? It can be mounted using 3M adhesive tape or screws — adaptable to a wide range of vehicle panel layouts and surfaces. What compliance approvals does the 12RCM-2 carry? The 12RCM-2 is approved under ECE and CTA standards, meeting international and Australian road approval requirements for legal on-road use as a stop/tail lamp. What warranty does the 12RCM-2 carry? The 12RCM-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Stop/Tail/Indicator Lamp Pair 6 SMD LEDs, 8mm Ultra-Slim, Aluminium Base Product Overview The LED Autolamps 12ARM-2 is a 12/24V stop/tail/indicator lamp supplied as a pair delivering three rear lighting functions in an ultra-slim 131mm x 30mm x 8mm form factor with a polycarbonate Fresnel-style lens and aluminium base. Six high-powered SMD LEDs produce bright, efficient output across all three functions, drawing just 0.20A on stop, 0.02A on tail, and 0.16A on indicator at 13.8V. ECE approved for horizontal and vertical mounting (CTA-060225) and rated IP67, it mounts via 3M tape or screws and comes with a 250mm cable lead. Refer to ADR 13/00 for mounting compliance. Backed by a 5-year warranty. Features & Benefits Supplied as a pair — both lamps included for a complete left and right rear installation in a single purchase 6 x SMD LEDs with Fresnel-style lens — enhanced lens design maximises light efficiency across all three functions, exceeding ECE approval thresholds Ultra-slim 8mm profile — low-profile aluminium base suits tight installation spaces on trailer, caravan, and truck body panels Exceptionally low current draw — 0.20A stop / 0.02A tail / 0.16A indicator at 13.8V; important for battery system efficiency in multi-lamp builds ECE Australian road approved — certified for stop/tail/indicator functions in both horizontal and vertical mounting orientations; CTA-060225 IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation; hardware supplied Horizontal and vertical mount — flexible orientation suits a wide range of panel layouts; refer to ADR 13/00 for mounting instructions 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 250mm cable lead — pre-wired and ready to connect straight out of the pack Technical Specs Specification Detail SKU 12ARM-2 Pack Contents 2 lamps (pair) Lamp Type Stop / Tail / Indicator LED Configuration 6 x SMD Voltage Range 12V – 24V Dimensions 131mm x 30mm x 8mm Cable Length 250mm Stop Current Draw 0.20A @ 13.8V / 0.20A @ 28V Tail Current Draw 0.02A @ 13.8V / 0.20A @ 28V Indicator Current Draw 0.16A @ 13.8V / 0.16A @ 28V Lens Polycarbonate (Fresnel-style) Base Material Aluminium Mounting 3M tape / screw (H or V) Protection Rating IP67 ECE Approval Stop / Tail / Indicator (H/V) CTA Approval CTA-060225 Warranty 5 years Weight 0.10 kg Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring low-profile stop/tail/indicator lamps 12V light vehicles and 24V heavy transport applications Battery-sensitive builds requiring low current draw rear lighting Installations requiring horizontal or vertical mounting flexibility LED Autolamps 12ACM-2 indicator lamp (same 12 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What is included in the 12ARM-2 pack? The pack contains two lamps — a complete pair for left and right rear installation — along with 3M tape and screws for mounting. Why is the low current draw important for the 12ARM-2? At just 0.20A stop, 0.02A tail, and 0.16A indicator at 13.8V, the 12ARM-2 places minimal load on the vehicle's battery system — particularly valuable for trailer and caravan builds running multiple lamps or battery-based setups. What compliance approvals does the 12ARM-2 carry? The 12ARM-2 is ECE approved for stop, tail, and indicator functions in both horizontal and vertical mounting orientations, with CTA approval reference CTA-060225. Refer to ADR 13/00 for correct mounting instructions. Can the 12ARM-2 be mounted in any orientation? Yes. It is tested and approved for both horizontal and vertical surface mounting — giving flexibility to suit different panel layouts on trailers, caravans, and truck bodies. What warranty does the 12ARM-2 carry? The 12ARM-2 is backed by a 5-year warranty from LED Autolamps. Weight 0.10 kg (per lamp) Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Ultra-Slim Reverse Lamp Twin Pack 8mm Profile, 3M Tape or Screw Mount, 12/24V Dual Voltage. Product Overview The LED Autolamps 11WM-2 is a twin pack of ultra-slim reverse lamps measuring just 8mm deep one of the lowest-profile reverse lamp options available for trucks, trailers, caravans, and commercial vehicles. At 89mm long and 30mm wide, each lamp mounts in either horizontal or vertical orientation using 3M adhesive tape or screws, giving installers flexible fitment options across a range of trailer body profiles, caravan rear panels, and vehicle tubs without requiring a dedicated lamp housing or cutout. Dual voltage operation across 12V and 24V and an IP67 waterproof rating make the 11WM-2 a versatile, low-maintenance solution for both light and heavy vehicle applications. Supplied as a twin blister pack two lamps per purchase making it convenient for pairing left and right reverse positions on a single trailer or vehicle build. Key Specifications Pack contents: 2 lamps (twin blister pack) Light function: Reverse lamp (white output) Voltage: 12V / 24V (dual voltage) IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ECE Australian Road Approved  Mount type: 3M tape or screw fitting Mount orientation: Horizontal or vertical Dimensions: 89mm (L) × 30mm (W) × 8mm (D) Warranty: 5 years Current draw: Not specified — confirm with LED Autolamps Connector type: Not specified — confirm with LED Autolamps Lumen output: Not specified — confirm with LED Autolamps Features & Benefits 8mm Ultra-Slim Profile — At just 8mm deep, the 11WM-2 is one of the slimmest reverse lamps in the LED Autolamps range. The minimal protrusion reduces the risk of impact damage at loading docks and in tight reversing clearance situations, and allows fitment in locations where a standard-depth reverse lamp housing would not fit. 3M Tape or Screw Fitting — The dual-mounting system provides genuine installation flexibility. 3M adhesive tape mounting is ideal for clean panel surfaces on caravans, enclosed trailers, and van bodies where drilling is undesirable. Screw mounting suits exposed or structural mounting positions requiring a mechanically secured connection. Horizontal and Vertical Mounting — The lamp is designed to function correctly in either horizontal or vertical orientation, giving installers full flexibility to optimise placement based on the vehicle or trailer body geometry. Twin Pack — Two lamps per blister pack — sufficient for a left/right reverse lamp pair on a single vehicle or trailer in a single purchase. No need to order two separate units. 12V / 24V Dual Voltage — Works natively across both light vehicle and heavy transport electrical systems without modification — suitable for caravans, utes, trucks, and 24V semi-trailers. IP67 Waterproof — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes — protected against rain, wash-downs, and the wet and muddy conditions common to Australian working and touring vehicles. ECE Australian Road Approved — Confirmed as road approved per the supplier's compliance statement. Specific certification codes have not been provided — see Red-flags for detail. 5-Year Warranty — Backed by a 5-year manufacturer's warranty across both lamps in the twin pack. Technical Specs Specification Detail Brand LED Autolamps Part Number 11WM-2 Pack Contents 2 Lamps (Twin Blister Pack) Light Function Reverse Lamp Light Type LED Output Colour White (reverse lamp application) Voltage 12V / 24V (Dual Voltage) IP Rating IP67 Compliance ECE Australian Road Approved Compliance Codes Not specified — confirm with LED Autolamps Mount Type 3M Tape or Screw Mount Orientation Horizontal or Vertical Length 89mm Width 30mm Depth 8mm Current Draw Not specified Lumen Output Not specified Connector Type Not specified Weight Not specified Warranty 5 Years Compatible With / Goes Well With Suitable applications: Reverse lamp positions on trucks, semi-trailers, and caravans (paired left/right with twin pack) Caravan and camper trailer rear lighting upgrades Van body and enclosed trailer reverse lighting Ute tub and canopy reverse lamp applications 4WD and touring vehicle rear lighting Any vehicle or trailer currently running a standard reverse lamp where a lower-profile LED alternative is preferred Pairs well with: LED Autolamps combination stop/tail/indicator lamp assemblies — the 11WM-2 provides the reverse function not included in 3-in-1 combination lamps (such as the 100BARRM and 150ARM) LED Autolamps wiring harness and auto electrical accessories Frequently Asked Questions How many lamps are included in the 11WM-2 pack? The 11WM-2 is a twin blister pack containing two reverse lamps — sufficient for a paired left/right reverse installation on a single vehicle or trailer. Can the 11WM-2 be mounted using 3M tape instead of screws? Yes. Each lamp can be mounted with either 3M adhesive tape or screws. The tape option is well-suited to smooth, clean panel surfaces on caravans and enclosed trailer bodies where drilling is not preferred. For permanent, structural, or high-vibration mounting positions, screw fitment is recommended. Does the 11WM-2 work in both horizontal and vertical orientations? Yes. The lamp is designed for use in either horizontal or vertical mounting positions, giving full flexibility for installation across different trailer body and vehicle panel geometries. Will the 11WM-2 pair with a 3-in-1 stop/tail/indicator lamp that doesn't include reverse? Yes. The 11WM-2 is designed to provide the reverse function in a rear lighting setup — making it a natural companion to 3-in-1 combination lamps such as the LED Autolamps 100BARRM and 150ARM that provide stop, tail, and indicator without a reverse function. Is the 11WM-2 suitable for both 12V caravans and 24V trucks? Yes. The 11WM-2 operates natively across 12V and 24V without modification, covering both light recreational vehicles and heavy commercial transport in a single product. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 49/00 Approved 10/30V Stop/Tail Lamp with Grommet and Plug 130mm Recessed, IP67 Product Overview The LED Autolamps 110RMG is a 10/30V LED stop/tail lamp designed for flush recessed mounting on trailers, trucks, and commercial vehicles. At 130mm round and 12mm deep with a plastic base, it is supplied with a grommet and plug for a complete, sealed recessed installation. The 3-pin connector is not included and must be sourced separately. ADR 49/00 compliant and rated IP67, drawing 0.31A at 13.8V. The stop/tail companion to the 110AMB indicator lamp in the 130mm round recessed series. Backed by a 5-year warranty. Features & Benefits Grommet and plug included — complete sealed installation kit for a weatherproof recessed fit straight out of the pack Low-profile flush recessed mount — 12mm depth sits flush with the panel for a clean, integrated finish ADR 49/00 compliant — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 3-pin plug and cable connector — note: 3-pin connector not supplied; must be sourced separately Low current draw — 0.31A at 13.8V for efficient operation across multi-lamp trailer builds 10/30V multi-voltage — compatible with 12V light vehicles through to 24V and 28V heavy transport without modification Plastic base — lightweight, corrosion-free housing suited to trailer and truck body panel mounting Technical Specs Specification Detail SKU 110RMG Lamp Type Stop / Tail Voltage Range 10V – 30V Diameter 130mm Depth 12mm Current Draw 0.31A @ 13.8V Base Material Plastic Mounting Flush recessed Connector 3-pin plug and cable (connector not supplied) Included Accessories Grommet, plug Protection Rating IP67 Compliance ADR 49/00 Weight 0.5 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring flush-mount stop/tail lamps with grommet 12V light vehicles and 24V/28V heavy transport applications Trailer builds requiring ADR-approved stop/tail lighting LED Autolamps 110AMB indicator lamp (same 130mm round recessed form factor) LED Autolamps 110WMG reverse lamp (same 130mm round recessed form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 110RMG approved for road use in Australia? Yes. The 110RMG is ADR 49/00 compliant, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. What accessories are included with the 110RMG? The pack includes a grommet and plug for a complete, sealed recessed installation. The 3-pin connector is not included and must be sourced separately. How does the 110RMG compare to the 110RMB stop/tail lamp? The 110RMG includes a grommet and plug for a sealed recessed installation, making it ready to fit straight out of the pack. The 110RMB is the same lamp in the same form factor without grommet accessories. What is the IP rating on the 110RMG? The 110RMG is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 110RMG carry? Not specified in available supplier data — confirm with LED Autolamps or F.A.E. before publishing. Weight 0.5 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Round Stop/Tail Lamp with Clear Lens Low-Profile Recessed Mount Product Overview The LED Autolamps 102RCM is a 12/24V round stop/tail lamp with a clear lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 130mm in diameter at just 12mm deep, it delivers a flush, clean finish the red stop/tail output activates via the LEDs when energised, while the lens appears clear when inactive. Surface bases are available for installations requiring surface mounting rather than a recessed fit. ADR Australian road approved, IP67 rated, and backed by a 5-year warranty, the 102RCM is the multi-voltage counterpart to the 12V-only 102RC. Features & Benefits Clear lens when inactive — presents a clean, colourless appearance at rest; red stop/tail colour activates when the lamp is energised Low-profile recessed mount — 12mm depth sits flush with the mounting panel for a clean, integrated finish Surface bases available — for installations requiring surface mounting rather than recessed fitting; contact F.A.E. for compatible surface base options ADR Australian road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 102RCM Lamp Type Stop / Tail Lens Colour Clear Voltage Range 12V / 24V Diameter 130mm Depth 12mm Mounting Low-profile recessed (surface base available) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed stop/tail lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail lighting with a clear lens finish LED Autolamps 102ACM clear lens 12/24V indicator lamp (matching clear lens and voltage range) Compatible surface mount bases (available separately — confirm with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102RCM approved for road use in Australia? Yes. The LED Autolamps 102RCM is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. How does the 102RCM differ from the 102RC? The 102RCM operates on both 12V and 24V systems, making it suitable for heavy transport as well as light vehicles. The 102RC is a 12V-only lamp. Both share the same 130mm round clear lens recessed mount form factor. What mounting options are available for the 102RCM? The 102RCM is designed for low-profile recessed mounting. Surface bases are also available for surface mount installations — contact F.A.E. for compatible options. What is the IP rating on the 102RCM? The 102RCM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 102RCM carry? The 102RCM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Round Amber Indicator Lamp with Low-Profile Recessed Mount IP67 Rated Product Overview The LED Autolamps 102A is a 12V round indicator lamp with an amber lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. At 130mm in diameter and just 12mm deep, it sits flush with the panel surface for a clean, unobtrusive finish that suits a wide range of trailer and tray body builds. ADR road approved and rated IP67, the 102A delivers reliable, road-legal indicator output in a compact, weatherproof package suited to exposed outdoor and transport environments. Features & Benefits Low-profile recessed mount — 12mm depth sits flush with the mounting panel for a clean, integrated appearance on trailer and truck bodies 130mm round form factor — a widely used size that suits standard recessed cutouts on trailers, caravans, and commercial vehicles Amber lens — delivers correct amber indicator output for rear and side indicator applications ADR road approved — meets Australian Design Rules requirements for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V — designed specifically for 12V trailer and vehicle electrical systems Technical Specs Specification Detail SKU 102A Lamp Type Indicator Lens Colour Amber Voltage 12V Diameter 130mm Depth 12mm Mounting Low-profile recessed Protection Rating IP67 Compliance ADR Warranty 1 year Weight 0.4 kg Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed indicator lamps 12V trailer and vehicle electrical systems Trailer builds requiring ADR-approved indicator lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102A approved for road use in Australia? Yes. The LED Autolamps 102A is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. What mounting style does the 102A use? The 102A is designed for low-profile recessed mounting, sitting just 12mm deep into the panel for a flush, clean finish on trailer and truck bodies. What is the IP rating on the 102A? The 102A is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Is the 102A compatible with 24V systems? No. The 102A is a 12V-only lamp and is not rated for 24V applications. For a 12/24V equivalent, check the LED Autolamps 110AMB or similar multi-voltage round indicator lamps. What warranty does the 102A carry? The 102A is backed by a 1-year warranty from LED Autolamps. Weight 0.4 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 49 LED Square Stop/Tail Lamp with Clip-In Replaceable Lens and 5-Year Warranty Product Overview The LED Autolamps 100RM is a compact 12/24V square stop/tail lamp fitted with 49 LEDs, supplied with a surface mount bracket and 30cm wire. The classic square 100 series design measures 122mm x 122mm x 31mm, making it a versatile fit for trailers, trucks, caravans, and tray body applications where a reliable, road-legal stop/tail lamp is needed. The clip-in replaceable lens allows for quick lens swaps without replacing the full unit, keeping maintenance simple and cost-effective. ADR road approved and rated IP67, the 100RM is backed by a 5-year warranty a strong indicator of the build quality LED Autolamps brings to this proven series. Features & Benefits 49 LEDs — high LED count delivers bright, consistent stop and tail output for strong rear visibility across all conditions Original square series design — the proven 100 series form factor suits trailers, caravans, trucks, and tray bodies with a clean, low-profile footprint Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and keeping downtime minimal when a lens is damaged ADR road approved — meets Australian Design Rules for legal on-road use across Australia IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Bracket and 30cm wire included — ready to mount straight out of the pack 5-year warranty — backed by LED Autolamps' full warranty programme for confidence in the long-term Technical Specs Specification Detail SKU 100RM Lamp Type Stop / Tail LED Quantity 49 Voltage Range 12V / 24V Dimensions 122mm x 122mm x 31mm Cable Length 300mm Protection Rating IP67 Approval ADR Lens Clip-in replaceable Mounting Surface mount bracket (included) Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and tray body applications 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 100RM approved for road use in Australia? Yes. The LED Autolamps 100RM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across Australia. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing, so it can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field. What is the IP rating on the 100RM? The 100RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer, caravan, and truck body mounting. Does the 100RM come with a bracket and wiring? Yes. The 100RM is supplied with a surface mount bracket and a 30cm wire, making it ready to install straight out of the pack. What warranty does the 100RM carry? The 100RM is backed by a 5-year warranty from LED Autolamps, reflecting the quality and durability of the 100 series design. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less