LED Autolamps 12RCM-2 12-24V Stop Tail Lamp Clear Lens Low Profile 131mm x 30mm x 8mm 3M Tape or Screw Mount ECE Approved CTA-061026 IP67 The LED Autolamps 12RCM-2 is a 12-24V LED stop/tail lamp with a clear lens in a low-profile 131mm x 30mm x 8mm format. ECE approved (CTA-061026), IP67 waterproof, 3M tape or screw mount, horizontal or vertical fitting. Five-year warranty. Sold individually. Product overview The 12RCM-2 is a compact low-profile stop/tail lamp suited to trailers, caravans, trucks, and commercial vehicles where a slim, surface-mount solution is required. The clear lens appears neutral when the lamp is not illuminated and illuminates with stop/tail output when active. At just 8mm deep, it mounts almost flush with the surface using 3M tape or screw fixing. Horizontal or vertical installation is supported. ECE approval CTA-061026 confirms road-legal use. IP67 rated. 12-24V compatible. For the matched indicator lamp in the same format, see the 12ACM-2. Features and benefits Clear lens: Appears neutral when inactive, illuminates with stop/tail output when active. Low-profile 8mm depth: 131mm x 30mm x 8mm compact housing for discreet surface mounting. 3M tape or screw fixing: Flexible mounting on flat and curved surfaces in horizontal or vertical orientation. ECE approved (CTA-061026): Meets international road approval standards accepted for on-road use in Australia. IP67 fully waterproof and submersible: Suited to trailer, caravan, and off-road environments. 12V and 24V compatible: Suits light vehicle trailers, caravans, trucks, and heavy transport. Five-year warranty. Sold individually. Technical specs Specification Detail SKU 12RCM-2 Brand LED Autolamps Type Stop/tail lamp Light Type LED Lens Clear Operating Voltage 12V to 24V Dimensions 131mm x 30mm x 8mm Mount Type 3M tape or screw Orientation Horizontal or vertical Waterproof Rating IP67 ECE Approval CTA-061026 Manufactured In China (Taiwan) Sold As Each Warranty Five years Frequently asked questions Is the 12RCM-2 approved for road use in Australia? Yes. The 12RCM-2 holds ECE approval CTA-061026, meeting international road approval standards accepted for on-road use in Australia. What mounting options does the 12RCM-2 offer? The 12RCM-2 can be mounted using 3M adhesive tape or screws in either horizontal or vertical orientation, suited to a wide range of panel types and installation positions. What does the clear lens look like when inactive? The clear lens appears visually neutral when the lamp is not powered. When active, it illuminates with the correct stop/tail output. Is there a matched indicator lamp in the same format? Yes. The LED Autolamps 12ACM-2 is a rear indicator lamp in the same 131mm x 30mm x 8mm clear lens format. Is the 12RCM-2 sold as a single unit or a pair? Sold individually. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 12ARM-2 12-24V Stop Tail Indicator Combination Lamp Clear Lens 131mm x 30mm x 8mm Low Profile 3M Tape or Screw Mount ECE Approved IP67 The LED Autolamps 12ARM-2 is a 12-24V LED stop/tail/indicator combination lamp with a clear polycarbonate lens in a low-profile 131mm x 30mm x 8mm format. ECE approved, IP67 waterproof, 3M tape or screw mount, horizontal or vertical fitting, 0.25m cable. 48mm mounting centres. Five-year warranty. Sold individually. Product overview The 12ARM-2 combines stop, tail, and indicator functions in a single low-profile unit suited to trailers, caravans, trucks, and commercial vehicles where a slim, flexible-mount combination lamp is required. The clear polycarbonate lens appears neutral when inactive. At just 8mm deep, the lamp mounts almost flush to the surface using 3M tape or screw fixing. Current draw at 13.3V: stop 0.20A, tail 0.02A, indicator 0.16A. Mounting centres are 48mm. 0.25m cable. ECE approved. IP67 rated. 12-24V compatible. Features and benefits Stop, tail, and indicator in a single 131mm unit: Low-profile combination lamp with clear lens for discreet trailer and vehicle body mounting. Clear polycarbonate lens: Appears neutral when inactive, illuminates with correct stop/tail/indicator output when active. 8mm low-profile depth: 131mm x 30mm x 8mm housing for a near-flush surface mount. 3M tape or screw fixing: Flexible mounting in horizontal or vertical orientation. 3M tape supplied. ECE road approved: Meets international road approval standards accepted for on-road use in Australia. IP67 fully waterproof and submersible: Suited to trailer, caravan, and off-road environments. 12V and 24V compatible: Suits light vehicle trailers, caravans, trucks, and heavy transport. 0.25m cable. 48mm mounting centres. Five-year warranty. Sold individually. Technical specs Specification Detail SKU 12ARM-2 Brand LED Autolamps Type Stop/tail/indicator combination lamp Light Type LED Lens Clear polycarbonate Base Material Polycarbonate Operating Voltage 12V to 24V Current Draw (Stop) 0.20A at 13.3V Current Draw (Tail) 0.02A at 13.3V Current Draw (Indicator) 0.16A at 13.3V Dimensions 131mm x 30mm x 8mm Mounting Centres 48mm Mount Type Surface mount Orientation Horizontal or vertical Connector 0.25m cable Includes 3M tape Waterproof Rating IP67 ECE Approved Yes Weight 0.1kg Manufactured In China (Taiwan) Sold As Each Warranty Five years Frequently asked questions Is the 12ARM-2 ECE approved? Yes. The 12ARM-2 carries ECE approval, meeting international road approval standards accepted for on-road use in Australia. What mounting options does the 12ARM-2 offer? The 12ARM-2 can be mounted using the supplied 3M adhesive tape or screws in either horizontal or vertical orientation, suited to a wide range of panel types and installation positions. What are the mounting centres for the 12ARM-2? The 12ARM-2 has 48mm mounting centres between fixing points. Confirm this suits your mounting location before purchasing. What is the current draw of the 12ARM-2? At 13.3V: stop draws 0.20A, tail draws 0.02A, and indicator draws 0.16A. Is the 12ARM-2 sold as a single unit or a pair? Sold individually. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JW Speaker 12/24V 6000K H15 Direct Fit LED Bulb Kit: The Incredibly Popular Direct Fit LED Bulb Range From JW Speaker!H15 Direct Fit LED Bulb KitThe first notable change is the packaging! This brand new look will be a way to distinguish between old and new stock. Through improved chip technology, light output and beam design now delivers up to 15% improvement to an already outstanding product.The final update is an upgrade to the multi-volt circuit board. The Voltage range has been widened so that the multi volt switching will be more suitable to 24V Japanese trucks. Most 24V trucks will charge at approx. 28V whereas Japanese 24V trucks can have a charge voltage of up to 32V. The Direct Fit Voltage range is now 9V to 40V which allows for error free higher charge voltages.JW Speaker 999015 Features: New Packaging Up to 15% Improved Light Output / Beam Pattern Multi Volt Now 9V to 40V JW Speaker 999015 Specifications: Lumen Output: 1800 per Bulb Colour Temp: 6000K Power: Low 18W, High 18W Voltage: DC 12/24V Operating Temp: -40¬∞ / +80¬∞ C (130¬∞ Max) IP Rating: IP65 Legendary Products & Support From Authorized Dealers When you choose JW Speaker, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JW Speaker dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JW Speaker's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JW Speaker dealer today!

Read more less

LED Autolamps 128AMF Amber LED Strobe Beacon Fixed Permanent Mount 11-48V 4 LED Rotating Effect SAE J845 Class 2 IP67 130mm The LED Autolamps 128AMF is an 11-48V amber LED strobe beacon with a rotating pattern effect for permanent fixed mounting. 4 LEDs, 82-92 FPM flash rate, amber polycarbonate lens, SAE J845 Class 2 certified, IP67 waterproof, 0.39A at 13.8V. 130mm x 97mm. Three-year warranty. Sold individually. Product overview The 128AMF is a fixed-mount amber strobe beacon suited to trucks, plant equipment, forklifts, and commercial vehicles requiring a permanently mounted warning beacon. The rotating LED pattern simulates a traditional rotating beacon effect using LEDs. The 11-48V operating range is broad enough to suit 12V, 24V, and 48V electrical systems. SAE J845 Class 2 certification confirms warning beacon compliance. The amber polycarbonate lens and black housing are rated IP67 for full waterproof and submersion protection. Flash rate is 82-92 FPM. Features and benefits Rotating LED pattern: Simulates a rotating beacon effect for high-visibility amber warning output. 11-48V operating range: Compatible with 12V, 24V, and 48V electrical systems — suits trucks, plant equipment, and forklifts. SAE J845 Class 2 certified: Warning beacon compliance for commercial and industrial applications. Fixed permanent mount: Suited to permanently mounted vehicle warning beacon installations. Amber polycarbonate lens: Durable lens for demanding outdoor and industrial environments. IP67 fully waterproof and submersible: Suited to outdoor, construction, and transport environments. 82-92 FPM flash rate. 0.39A current draw at 13.8V. 130mm x 97mm housing. Three-year warranty. Sold individually. Technical specs Specification Detail SKU 128AMF Brand LED Autolamps Type Strobe beacon LED Count 4 LED Colour Amber Lens Colour Amber Lens Material Polycarbonate Housing Colour Black Operating Voltage 11V to 48V Current Draw 0.39A at 13.8V Flash Rate 82-92 FPM Flash Pattern Rotating effect Mount Type Fixed permanent Certification SAE J845 Class 2 Dimensions 130mm (diameter) x 97mm (height) Waterproof Rating IP67 Weight 0.4kg Manufactured In China (Taiwan) Sold As Each Warranty Three years Frequently asked questions What compliance certification does the 128AMF carry? The 128AMF is certified to SAE J845 Class 2, a standard for vehicle warning beacons specifying photometric output requirements for amber strobe and rotating beacons. What does the rotating pattern effect mean? The 128AMF uses LEDs to simulate a rotating beacon effect producing a sweeping amber warning pattern without a mechanical rotating mechanism, providing the visual appearance of a traditional rotating beacon with the durability and efficiency of LED technology. What voltage systems is the 128AMF compatible with? The 128AMF operates from 11V to 48V, covering 12V passenger and light commercial vehicles, 24V trucks and heavy transport, and 48V plant and industrial equipment. How is the 128AMF mounted? The 128AMF is designed for permanent fixed mounting. Contact us to confirm the mounting hardware and thread specifications required for your application before purchasing. Is the 128AMF suitable for outdoor and construction environments? Yes. The IP67 rating confirms the 128AMF is fully sealed against dust and submersible in water up to 1 metre for up to 30 minutes, suited to outdoor, construction, transport, and industrial environments. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 120035BM 12-24V Blue LED Emergency Warning Lamp 6 x 3W LEDs 14 Flash Patterns SAE J595 Class 1 IP67 Sync Up to 20 Lamps The LED Autolamps 120035BM is a 12-24V blue LED emergency warning lamp with 6 x 3W LEDs, 14 selectable flash patterns, and a synchronising wire that links up to 20 lamps. SAE J595 Class 1 certified, IP67 waterproof, 0.29A at 13.8V, clear lens, 3M tape or screw mount. 131mm x 30mm x 8mm. Three-year warranty. Sold individually. Product overview The 120035BM is the blue variant of the LED Autolamps 120035 emergency warning lamp range. Blue warning lamps are restricted in most Australian states and territories to authorised emergency service vehicles. Always confirm local regulations and required authorisations before purchasing and fitting. The 6 x 3W LED array and 14 flash patterns provide higher output and more pattern flexibility than the 120033 and 120034 ranges. The synchronising wire links up to 20 lamps simultaneously. Flash rate is 120 FPM in single, double, and quad modes. Clear lens housing. SAE J595 Class 1 certified. IP67 rated. 12-24V compatible. Features and benefits 6 x 3W blue LEDs: High-power LED array for strong emergency warning output. 14 selectable flash patterns: More pattern options than the 120033 and 120034 ranges. Sync up to 20 lamps: Synchronising wire links up to 20 units for large coordinated warning lighting setups. 120 FPM flash rate: Single, double, and quad flash modes at 120 flashes per minute. SAE J595 Class 1 certified: Highest SAE classification for vehicle warning lamps. Clear lens: Neutral appearance when inactive. IP67 fully waterproof and submersible: Suited to outdoor and exposed vehicle body mounting. 3M tape or screw fixing: Flexible mounting on flat and curved surfaces. 131mm x 30mm x 8mm ultra-slim profile. 12V and 24V compatible: Suits light vehicles and heavy transport. Three-year warranty. Sold individually. Technical specs Specification Detail SKU 120035BM Brand LED Autolamps Type Emergency warning lamp LED Colour Blue LED Configuration 6 x 3W Lens Colour Clear Operating Voltage 12V to 24V Current Draw 0.29A at 13.8V Flash Patterns 14 selectable Flash Rate 120 FPM (single/double/quad) Sync Capacity Up to 20 lamps Synchronising Wire Included Certification SAE J595 Class 1 Mount Type 3M tape or screw Dimensions 131mm x 30mm x 8mm Waterproof Rating IP67 Weight 0.05kg Manufactured In China (Taiwan) Sold As Each Warranty Three years Frequently asked questions What compliance certification does the 120035BM carry? The 120035BM carries SAE J595 Class 1 certification, the highest SAE classification for vehicle warning lamps. What applications use blue warning lamps in Australia? Blue warning lamps are restricted in most Australian states and territories to authorised emergency service vehicles. Always confirm local regulations and required authorisations before purchasing and fitting. How many lamps can be synchronised with the 120035BM? The synchronising wire on the 120035BM can link up to 20 lamps simultaneously for coordinated flash patterns across a vehicle or fleet setup. What mounting options does the 120035BM support? The 120035BM can be mounted using 3M adhesive tape or screws in either horizontal or vertical orientation, suited to a wide range of vehicle surfaces and body panels. What is the current draw of the 120035BM? The 120035BM draws 0.29A at 13.8V. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX LLX3003 Underbonnet LED Work Light Extendable The OEX LLX3003 is an extendable underbonnet LED work light, stretching from 1.2m to 2.0m, delivering 1000 lumens with magnet and hook mounting options and USB charging. Product Overview The LLX3003 is an extendable underbonnet LED work light from OEX, powered by powerful SMD LEDs producing 1000 lumens of light. Extendable from 1.2m to 2.0m, the light is designed to reach across an engine bay or work area for any job, with two magnets and two soft hooks for mounting to almost any surface. Battery life runs to 8 hours on 500 lumen output, or 4 hours on the full 1000 lumen setting, with an approximate 3 hour charge time using the included USB charge cable. Features & Benefits 1000 Lumen SMD LEDs: Powerful SMD LEDs produce up to 1000 lumens of light for clear visibility during underbonnet or general work. Extendable 1.2m to 2.0m Length: The extendable design stretches from 1.2m to 2.0m, letting the light reach across a wide engine bay or work area. Two Mounting Options: Two strong magnets and two soft hooks allow mounting to almost any surface, whether metal or non-metal. Up to 8 Hours Battery Life: Battery life reaches up to 8 hours on the 500 lumen setting, or 4 hours on the full 1000 lumen output. Fast USB Charging: An approximate 3 hour charge time via the included USB charge cable keeps the light ready to go. Technical Specs Specification Detail Part No. LLX3003 Brand OEX Description Underbonnet LED Work Light, Extendable Length Light Type LED (SMD) Light Output 1000 Lumen Extendable Length 1.2m to 2.0m Battery Life 8 Hours @ 500 Lumen, 4 Hours @ 1000 Lumen Charge Time Approx. 3 Hours (USB) Mounting 2 x Magnets, 2 x Soft Hooks Compatible With The LLX3003 is a standalone rechargeable work light suited to underbonnet inspection and general workshop use, mounting via its included magnets or hooks to almost any surface. Frequently Asked Questions What is the LLX3003 used for? The LLX3003 is an extendable LED work light designed for underbonnet inspection and general workshop lighting tasks. How far does the LLX3003 extend? The LLX3003 extends from 1.2m to 2.0m, letting it reach across a wide engine bay or work area. How long does the battery last? Battery life is up to 8 hours on the 500 lumen setting, or 4 hours on the full 1000 lumen output. How is the LLX3003 mounted? The LLX3003 includes two strong magnets and two soft hooks for mounting to almost any surface. How long does it take to charge? The LLX3003 takes approximately 3 hours to charge using the included USB charge cable. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 120033AM 12-24V Amber LED Emergency Warning Lamp 11 Flash Patterns SAE J595 Class 1 IP67 with Synchronising Wire The LED Autolamps 120033AM is a 12-24V amber LED emergency warning lamp with 11 selectable flash patterns and a synchronising wire for multi-lamp coordination. SAE J595 Class 1 certified, IP67 waterproof, 3M tape or screw mount. 89mm x 30mm x 8mm. Three-year warranty. Sold individually. Product overview The 120033AM is suited to emergency vehicles, service vehicles, and safety applications requiring an amber warning lamp with multiple flash pattern options. The synchronising wire allows multiple lamps to be wired together for coordinated flashing. SAE J595 Class 1 certification confirms high-intensity warning lamp compliance. The 3M tape or screw fixing allows mounting on flat and curved surfaces. IP67 rated. 12-24V compatible across light vehicles and heavy transport. Available in five colours the 120033AM is the amber variant. Features and benefits 11 selectable flash patterns: Flexible warning output suited to a range of emergency and safety applications. Synchronising wire: Allows multiple lamps to be coordinated for matched flash patterns across a vehicle. SAE J595 Class 1 certified: High-intensity warning lamp compliance for emergency and safety vehicle applications. 3M tape or screw fixing: Flexible mounting on flat and curved surfaces. 89mm x 30mm x 8mm: Compact, low-profile housing. IP67 fully waterproof and submersible: Suited to outdoor and exposed vehicle body mounting. 12V and 24V compatible: Suits light vehicles and heavy transport. Available in five colours: The 120033AM is the amber variant. Three-year warranty. Sold individually. Technical specs Specification Detail SKU 120033AM Brand LED Autolamps Type Emergency warning lamp LED Colour Amber Operating Voltage 12V to 24V Flash Patterns 11 Synchronising Wire Yes Certification SAE J595 Class 1 Mount Type 3M tape or screw Dimensions 89mm x 30mm x 8mm Waterproof Rating IP67 Weight 0.039kg Manufactured In China (Taiwan) Available Colours 5 (amber, plus other variants) Sold As Each Warranty Three years Frequently asked questions What is SAE J595 Class 1 certification? SAE J595 Class 1 is a US-origin standard for warning lamps, specifying minimum photometric output requirements. Class 1 is the highest intensity tier, confirming this lamp meets high-visibility requirements for emergency and safety vehicle applications. How does the synchronising wire work? The synchronising wire connects multiple 120033AM lamps together so they flash in a coordinated pattern. This allows a matched, simultaneous warning display across multiple lamps on the same vehicle. What flash patterns does the 120033AM offer? The 120033AM has 11 selectable flash patterns to suit different warning applications and operator preferences. What voltage does the 120033AM operate on? The 120033AM operates on 12V and 24V systems, making it suited to light vehicles, emergency vehicles, trucks, and heavy transport. Is the 120033AM available in other colours? Yes. The 120033AM range is available in five colours. The 120033AM is the amber variant. Contact us to confirm the availability of other colour variants. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 11WM-2 12-24V Reverse Lamp Horizon Series 89mm x 30mm x 8mm Low Profile 3M Tape or Screw Mount Horizontal or Vertical ECE Approved IP67 The LED Autolamps 11WM-2 is a 12-24V reverse lamp from the Horizon series. Low-profile 8mm depth in an 89mm x 30mm housing. Mounts via 3M tape or screw fixing in horizontal or vertical orientation. ECE approved, IP67 waterproof. Five-year warranty. Sold individually. Product overview The 11WM-2 is a slim, surface-mount reverse lamp suited to trailers, caravans, trucks, and commercial vehicles where a low-profile, flexible-mount solution is required. At just 8mm deep, the Horizon series lamp sits almost flush with the mounting surface. The 3M tape or screw fixing options allow mounting on flat and curved panels alike, and horizontal or vertical orientation is supported. ECE approved for road use. IP67 rated for full waterproof and submersion protection. 12-24V compatible. For matched stop/tail and indicator lamps in the same format, see the 11RM-2 and 11AM-2. Features and benefits 3M tape or screw fixing: Flexible mounting options for flat and curved panel surfaces. Horizontal and vertical mount: Suits a wide range of installation orientations. Low-profile 8mm depth: Horizon series slim design sits almost flush with the mounting surface. 89mm x 30mm housing: Compact form factor for discreet trailer and vehicle body mounting. ECE approved: Meets international road approval standards for legal on-road use. IP67 fully waterproof and submersible: Suited to trailer, caravan, and off-road environments. 12V and 24V compatible: Suits light vehicle trailers, caravans, trucks, and heavy transport. Five-year warranty. Sold individually. Technical specs Specification Detail SKU 11WM-2 Brand LED Autolamps Series Horizon Type Reverse lamp Light Type LED Operating Voltage 12V to 24V Dimensions 89mm x 30mm x 8mm Mount Type 3M tape or screw Orientation Horizontal or vertical Waterproof Rating IP67 ECE Approved Yes Weight 0.01kg Manufactured In China (Taiwan) Sold As Each Warranty Five years Frequently asked questions Is the 11WM-2 ECE approved? Yes. The 11WM-2 carries ECE approval, confirming compliance for road use as a reverse lamp. What mounting options does the 11WM-2 offer? The 11WM-2 can be mounted using 3M adhesive tape or screw fixing, in either horizontal or vertical orientation, making it suited to a wide range of panel types and installation positions. How low-profile is the 11WM-2? The 11WM-2 is 8mm deep part of the LED Autolamps Horizon series, designed for an almost-flush surface mount with minimal protrusion. Are matched stop/tail and indicator lamps available in the same series? Yes. The LED Autolamps 11RM-2 stop/tail and 11AM-2 rear indicator are in the same Horizon series format, allowing a fully matched rear lighting cluster across all three functions. What voltage does the 11WM-2 operate on? The 11WM-2 operates on 12V and 24V systems, making it suited to light vehicle trailers, caravans, trucks, and commercial vehicles. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 110RMG 12-24V Round LED Stop Tail Lamp 130mm Flush Mount with Grommet and Plug ADR 49/00 IP67 The LED Autolamps 110RMG is a 12-24V round LED stop/tail lamp in a 130mm flush-mount format, supplied with a grommet and plug for panel mounting. ADR approved (ADR 49/00), IP67 waterproof, 0.31A current draw at 13.8V. Plastic base. Five-year warranty. Sold individually. Product overview The 110RMG is a round flush-mount stop/tail lamp suited to trailers, caravans, trucks, and commercial vehicles. The grommet and plug are included for a complete panel-mount installation. The 130mm diameter and 12mm depth suit standard round panel cutouts. ADR 49/00 compliance confirms road-legal use as a stop/tail lamp. 12-24V compatible across light vehicle and heavy transport applications. IP67 rated. For a matched indicator lamp in the same format, see the LED Autolamps 110AMG. Features and benefits Grommet and plug included: Panel mounting hardware supplied for a complete installation. 130mm round, 12mm depth: Low-profile flush mount for a clean panel installation. ADR approved (ADR 49/00): Compliant for road use in Australia as a stop/tail lamp. IP67 fully waterproof and submersible: Suited to trailer, caravan, and off-road environments. 12V and 24V compatible: Suits light vehicle trailers, caravans, trucks, and heavy transport. 0.31A current draw at 13.8V. Plastic base. Five-year warranty. Sold individually. Technical specs Specification Detail SKU 110RMG Brand LED Autolamps Type Stop/tail lamp Light Type LED Operating Voltage 12V to 24V Current Draw 0.31A at 13.8V Mount Type Flush Diameter 130mm Depth 12mm Base Material Plastic Includes Grommet and plug Waterproof Rating IP67 ADR Compliance ADR 49/00 Weight 0.281kg Manufactured In China (Taiwan) Sold As Each Warranty Five years Frequently asked questions Is the 110RMG ADR approved? Yes. The 110RMG holds ADR 49/00 approval, confirming compliance for road use in Australia as a stop/tail lamp. What voltage does the 110RMG operate on? The 110RMG operates on 12V and 24V systems, making it suited to light vehicle trailers, caravans, trucks, and commercial vehicles. What is included with the 110RMG? The 110RMG is supplied with a grommet and plug for panel mounting. Contact us to confirm the full list of included hardware before purchasing. Is there a matched indicator lamp available? Yes. The LED Autolamps 110AMG is a round amber indicator lamp in the same format with grommet and plug included. Is the 110RMG sold as a single unit or a pair? Sold individually. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 102RCM 12-24V Round LED Stop Tail Lamp Clear Lens 130mm Diameter Low Profile Recessed Mount ADR Approved IP67 The LED Autolamps 102RCM is a 12-24V round LED stop/tail lamp with a clear lens in a 130mm diameter low-profile recessed mount format. ADR approved, IP67 waterproof. Surface bases available separately. Five-year warranty. Sold individually. Product overview The 102RCM is the 12-24V version of the LED Autolamps 130mm round clear lens stop/tail lamp range, suited to trailers, caravans, trucks, and commercial vehicles. The clear lens provides a clean, unobtrusive appearance when the lamp is not illuminated. The 130mm diameter and 12mm depth suit standard round panel cutouts. Surface bases are available separately for surface mount applications. ADR approved for road use in Australia. Features and benefits Clear lens: Appears neutral when the lamp is inactive, illuminates with stop/tail output when active. 130mm round, 12mm depth: Low-profile recessed mount for a flush panel installation. Surface bases available separately: Suits surface mount applications where a recessed cutout is not practical. ADR approved: Compliant for road use in Australia as a stop/tail lamp. IP67 fully waterproof and submersible: Suited to trailer, caravan, and off-road environments. 12V and 24V compatible: Suits light vehicle trailers, caravans, trucks, and heavy transport. Five-year warranty. Sold individually. Technical specs Specification Detail SKU 102RCM Brand LED Autolamps Type Stop/tail lamp Light Type LED Lens Clear Operating Voltage 12V to 24V Mount Type Recessed Diameter 130mm Depth 12mm Surface Base Available separately Waterproof Rating IP67 ADR Approved Yes Weight 0.196kg Manufactured In China (Taiwan) Sold As Each Warranty Five years Frequently asked questions Is the 102RCM ADR approved? Yes. The 102RCM carries ADR approval, confirming compliance for road use in Australia as a stop/tail lamp. What voltage does the 102RCM operate on? The 102RCM operates on 12V and 24V systems, making it suited to light vehicle trailers, caravans, trucks, and commercial vehicles. What is the difference between the 102RCM and the 102RC? The 102RC is 12V only. The 102RCM operates on both 12V and 24V systems, making it suited to heavy transport and dual-voltage applications. Both share the same 130mm clear lens recessed format. What type of mount does the 102RCM use? The 102RCM uses a low-profile recessed mount with a 130mm diameter and 12mm depth. Surface bases are available separately for surface mount installations. Is the 102RCM sold as a single unit or a pair? Sold individually. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 7035A Amber Rectangular Reflector with Mounting Bracket 93mm x 35mm x 7mm Screw Mount White Housing ADR/ECE Approved CTA060131 2 Pack The LED Autolamps 7035A is an amber rectangular reflector with mounting bracket measuring 93mm x 35mm x 7mm. Screw mount. White housing. ADR/ECE approved (CTA060131). Five-year warranty. Sold as a 2-pack blister. Product overview The 7035A is a larger-format amber rectangular reflector with an included mounting bracket for screw-type surface installation on trailers and commercial vehicles. At 93mm x 35mm x 7mm it is larger than the 7030 series 70x30mm adhesive reflectors, suited to applications where a bracket-mounted screw-fit reflector is preferred. ADR/ECE approval CTA060131 confirms road-legal compliance in Australia. White housing. 2-pack blister. Features and benefits Amber rectangular reflector with mounting bracket. Screw-type fitting: Bracket mount for secure mechanical installation. 93mm x 35mm x 7mm low-profile design. White housing. ADR/ECE approved (CTA060131): Compliant for road use in Australia. 2-pack: Two reflectors per blister pack. Five-year warranty. Technical specs Specification Detail SKU 7035A Brand LED Autolamps Type Rectangular reflector with mounting bracket Colour Amber Shape Rectangle Housing Colour White Dimensions 93mm x 35mm x 7mm Mount Screw type (bracket included) ADR/ECE Compliance CTA060131 Weight 0.055kg Manufactured In China (Taiwan) Sold As 2-pack blister Warranty Five years Frequently asked questions Is the 7035A ADR and ECE approved? Yes. The 7035A holds ADR/ECE approval CTA060131, confirming compliance for road use in Australia as a side reflector. What is the difference between the 7035A and the 7030A? The 7035A is 93mm x 35mm x 7mm with a bracket for screw mounting. The 7030A is 70mm x 30mm x 6mm with 3M adhesive mounting. Both are amber reflectors with ADR CTA060131 approval. Choose the 7035A where a bracket-mounted screw-fit installation is required. Does the 7035A require wiring? No. The 7035A is a passive reflector no wiring or power source is required. How many reflectors are in the 7035A pack? The 7035A is sold as a 2-pack blister containing two reflectors with mounting brackets. What warranty does the 7035A carry? The 7035A is backed by a five-year warranty. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less