ADR Approved 12/24V Indicator Lamp with Rubber Grommet and Plug Recessed Mount, IP67 Product Overview The LED Autolamps 130AMG is a 12/24V LED indicator lamp supplied with a rubber grommet and plug for a complete, sealed recessed installation straight out of the blister pack. Designed for flush recessed mounting on trailers, trucks, and commercial vehicles, it connects via a 3-pin plug and cable note that the 3-pin connector is not supplied and must be sourced separately. ADR road approved and rated IP67, drawing 0.2A at 13.8V. Backed by a 5-year warranty. Features & Benefits Rubber grommet and plug included — complete sealed installation kit supplied in the blister pack for a fully weatherproof recessed fit Flush recessed mount — sits flush with the panel for a clean, integrated appearance on trailer and truck bodies ADR road approved — meets Australian Design Rules for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 3-pin plug and cable connector — note: 3-pin connector not supplied; must be sourced separately Low current draw — 0.2A at 13.8V for efficient operation across multi-lamp trailer builds 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 130AMG Lamp Type Indicator Voltage Range 12V / 24V Current Draw 0.2A @ 13.8V Mounting Flush recessed Connector 3-pin plug and cable (connector not supplied) Included Accessories Rubber grommet, plug Protection Rating IP67 Compliance ADR Warranty 5 years Weight 0.5 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring flush-mount indicator lamps with grommet 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved indicator lighting LED Autolamps 130AMB indicator lamp (same 130 series, without grommet) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 130AMG approved for road use in Australia? Yes. The LED Autolamps 130AMG is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. What accessories are included with the 130AMG? The blister pack includes a rubber grommet and plug for a complete, sealed recessed installation. Note that the 3-pin connector is not included and must be sourced separately. What is the difference between the 130AMG and the 130AMB? The 130AMG includes a rubber grommet and plug for a sealed recessed installation, while the 130AMB is supplied without these accessories and is also available with an optional bracket/plug kit. Both are ADR-approved 12/24V indicator lamps in the 130 series. What is the IP rating on the 130AMG? The 130AMG is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 130AMG carry? The 130AMG is backed by a 5-year warranty from LED Autolamps. Weight 0.5 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Indicator Lamp with Hexagon Pattern Lens Recessed Mount, IP67 Product Overview The LED Autolamps 130AMB is a 12/24V LED indicator lamp with a distinctive hexagon pattern lens, designed for recessed mounting on trailers, trucks, and commercial vehicles. Built to meet ADR standards with a practical component set, it offers a cost-effective rear indicator solution for operators who need road-legal compliance without unnecessary complexity. Available with an optional grommet/plug kit or bracket/plug kit for installation flexibility contact F.A.E. to confirm which accessory kit suits your application. Rated IP67 and backed by a 5-year warranty. Features & Benefits Hexagon pattern lens — distinctive lens design for a recognisable appearance on trailer and truck body panels Recessed mount — designed for clean, flush installation in trailer and commercial vehicle body panels ADR road approved — meets Australian Design Rules for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments Grommet/plug kit available — optional accessory for a fully sealed recessed installation Bracket/plug kit available — optional accessory for surface mount applications; confirm availability with F.A.E. 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 130AMB Lamp Type Indicator Lens Style Hexagon pattern Voltage Range 12V / 24V Mounting Recessed Protection Rating IP67 Compliance ADR Warranty 5 years Weight 0.14 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed indicator lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved indicator lighting LED Autolamps grommet/plug and bracket/plug accessory kits (available separately) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 130AMB approved for road use in Australia? Yes. The LED Autolamps 130AMB is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. What accessory kits are available for the 130AMB? The 130AMB is available with a grommet/plug kit for recessed installation or a bracket/plug kit for surface mount applications. Contact F.A.E. to confirm which kit is appropriate for your installation. What makes the 130AMB lens different from other indicator lamps? The 130AMB features a hexagon pattern lens, giving it a distinctive appearance that differentiates it visually from standard round or smooth lens indicator lamps. What is the IP rating on the 130AMB? The 130AMB is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 130AMB carry? The 130AMB is backed by a 5-year warranty from LED Autolamps. Weight 0.14 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12/24V Reverse Lamp 8mm Ultra-Slim, 0.4m Cable, 3M Tape or Screw Mount Product Overview The LED Autolamps 12WM-2 is a 12/24V LED reverse lamp in the ultra-slim 12 series form factor, measuring 131mm x 30mm x 8mm. Supplied in a blister pack with a 0.4m pre-wired cable, it mounts via 3M adhesive tape or screws on trailers, caravans, trucks, and commercial vehicles where a low-profile reverse lamp is required. ECE approved under E9 23R00/22177 and rated IP67, it draws 0.21A at 13.8V for efficient operation in multi-lamp builds. Backed by a 5-year warranty, the 12WM-2 completes the 12 series alongside the 12ACM-2 indicator and 12RCM-2 stop/tail lamps for a fully matched low-profile rear lighting set. Features & Benefits Ultra-slim 8mm profile — low-profile design suits tight installation spaces on trailer, caravan, and truck body panels 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation on a wide range of surfaces ECE road approved — certified under E9 23R00/22177 for legal on-road use as a reverse lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 0.4m pre-wired cable — ready to connect straight out of the pack Low current draw — 0.21A at 13.8V for efficient operation in multi-lamp trailer and caravan setups 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 12WM-2 Lamp Type Reverse Voltage Range 12V – 24V Dimensions 131mm x 30mm x 8mm Current Draw 0.21A @ 13.8V Cable Length 0.4m Mounting Surface mount (3M tape / screw) Protection Rating IP67 Compliance ECE E9 23R00/22177 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring low-profile reverse lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 12ACM-2 clear lens indicator lamp (same 12 series form factor) LED Autolamps 12RCM-2 clear lens stop/tail lamp (same 12 series form factor) LED Autolamps 12ARM-2 stop/tail/indicator lamp pair (same 12 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 12WM-2 approved for road use in Australia? Yes. The 12WM-2 is ECE approved under E9 23R00/22177, meeting international road approval standards accepted for legal on-road use in Australia as a reverse lamp. What mounting options does the 12WM-2 support? It can be mounted using 3M adhesive tape or screws on flat vehicle panel surfaces — adaptable to a wide range of trailer, caravan, and truck body layouts. How does the 12WM-2 fit with other 12 series lamps? The 12WM-2 shares the same 131mm x 30mm x 8mm form factor as the 12ACM-2 indicator and 12RCM-2 stop/tail lamps, making it a natural match for a uniform full-function rear lighting set across all functions. What is the IP rating on the 12WM-2? The 12WM-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 12WM-2 carry? The 12WM-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Modular Surface Mount Reverse Lamp CRN35794 Product Overview The LED Autolamps 125WMB is a 12/24V LED reverse lamp designed for modular surface mounting on trailers, trucks, and commercial vehicles. ADR approved under CRN35794 and drawing just 0.2A, it's a compact, efficient reverse light solution suited to builders and auto electricians integrating modular lighting systems on vehicle bodies. Compatible with both 12V and 24V systems and backed by a 1-year warranty. Features & Benefits Modular surface mount — designed for integration into modular lighting systems on trailer and truck bodies ADR approved — certified under CRN35794 for road-legal use as a reverse lamp in Australia 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Low current draw — 0.2A for efficient operation in multi-lamp vehicle lighting setups LED light type — long-lasting, low-maintenance reverse light output Technical Specs Specification Detail SKU 125WMB Lamp Type Reverse Voltage Range 12V / 24V Current Draw 0.2A Mounting Modular surface mount Compliance ADR — CRN35794 Warranty 1 year Weight 0.5 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring modular surface mount reverse lamps 12V light vehicles and 24V heavy transport applications Modular trailer and truck body lighting systems LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 125WMB approved for road use in Australia? Yes. The LED Autolamps 125WMB is ADR approved under CRN35794, meeting Australian Design Rules requirements for legal on-road use as a reverse lamp. What does modular surface mount mean? The 125WMB is designed to integrate into modular lighting systems, allowing it to be combined with other modular lamp units on trailer and truck bodies for a coordinated, flexible installation. How does the 125WMB differ from the 125WM reverse lamp? The 125WMB is a modular surface mount unit with a 1-year warranty and 0.2A current draw, while the 125WM is part of the square 125 series with a clip-in lens and 5-year warranty. Confirm the correct variant with F.A.E. for your specific application. Does the 125WMB work on both 12V and 24V systems? Yes. It operates across 12V to 24V, making it compatible with light vehicles as well as 24V heavy transport applications without any modification. What warranty does the 125WMB carry? The 125WMB is backed by a 1-year warranty from LED Autolamps. Weight 0.5 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 25 LED Square Reversing Lamp with Clip-In Replaceable Lens 5-Year Warranty Product Overview The LED Autolamps 125WM is a 12/24V square reversing lamp fitted with 25 white LEDs, surface mounted and pre-wired in the same 147mm x 147mm x 31mm 125 series form factor as the 125RM stop/tail and 125AM indicator lamps. Designed to complete a full matched rear lighting set across trailers, trucks, caravans, and tray bodies. The clip-in replaceable lens allows for quick lens swaps without replacing the full housing. ADR road approved and rated IP67, the 125WM is backed by a 5-year warranty. Features & Benefits 25 white LEDs — delivers clear, bright reverse light output for improved visibility when reversing 147mm square form factor — matches the 125AM and 125RM for a fully uniform rear lighting set across all functions Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and minimising downtime when a lens is damaged ADR road approved — meets Australian Design Rules for legal on-road use as a reversing lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Surface mount — straightforward installation on trailer and truck body panels 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 125WM Lamp Type Reverse LED Quantity 25 white Voltage Range 12V – 24V Dimensions 147mm x 147mm x 31mm Mounting Surface mount Lens Clip-in replaceable Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and tray body applications requiring a larger-format reversing lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved reversing lighting LED Autolamps 125AM indicator lamp (same 125 series form factor) LED Autolamps 125RM stop/tail lamp (same 125 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 125WM approved for road use in Australia? Yes. The LED Autolamps 125WM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a reversing lamp. How does the 125WM fit with other 125 series lamps? The 125WM shares the same 147mm x 147mm x 31mm form factor as the 125AM indicator and 125RM stop/tail lamps, making it a natural match for a uniform full-function rear lighting set across all three. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing and can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field. What is the IP rating on the 125WM? The 125WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 125WM carry? The 125WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 64 LED Square Stop/Tail Lamp with Clip-In Replaceable Lens 5-Year Warranty Product Overview The LED Autolamps 125RM is a 12/24V square stop/tail lamp fitted with 64 LEDs, supplied with a 30cm pre-wired lead for surface mounting on trailers, trucks, caravans, and tray bodies. Measuring 147mm x 147mm x 31mm, it's the stop/tail companion to the 125AM indicator lamp in the 125 series a larger-format step up from the 100 series for applications requiring a more prominent rear light face. The clip-in replaceable lens allows for quick lens swaps without replacing the full housing. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits 64 LEDs — delivers bright, consistent red stop/tail output across a large face for strong rear visibility 147mm square form factor — larger than the 100 series for a more prominent stop/tail presence on trailers and truck bodies Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and minimising downtime when a lens is damaged ADR road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Pre-wired 30cm lead — ready to connect straight out of the pack Surface mount — straightforward installation on trailer and truck body panels 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 125RM Lamp Type Stop / Tail LED Quantity 64 Voltage Range 12V – 24V Dimensions 147mm x 147mm x 31mm Cable Length 300mm Mounting Surface mount Connector Pre-wired Lens Clip-in replaceable Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and tray body applications requiring a larger-format stop/tail lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail lighting LED Autolamps 125AM indicator lamp (same 125 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 125RM approved for road use in Australia? Yes. The LED Autolamps 125RM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. How does the 125RM differ from the 100RM stop/tail lamp? The 125RM is larger at 147mm x 147mm vs 122mm x 122mm and features 64 LEDs vs 49, providing a more prominent stop/tail face for larger trailer and truck body applications. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing and can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field. What is the IP rating on the 125RM? The 125RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 125RM carry? The 125RM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 153 LED Stop/Tail/Indicator/Reverse Assembly 3 Lamps, Individual Lens Replacements Product Overview The LED Autolamps 125BARWM is a 12/24V rear combination lamp assembly packing 153 LEDs across three lamps covering stop, tail, indicator, and reverse functions in a single 435mm x 146mm x 31mm surface-mount unit. The three-lamp configuration provides distinct function zones across the assembly face for clear, visible rear lighting on trailers, tray bodies, and trucks. Individual lens replacements allow each section to be swapped independently without replacing the full assembly a practical cost-saving advantage for fleet operators and trailer builders. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits 153 LEDs across 3 lamps — high LED count spread across stop, tail, indicator, and reverse zones for strong, consistent rear visibility Stop, tail, indicator, and reverse in one assembly — complete four-function rear lighting in a single 435mm unit, reducing wiring complexity Individual lens replacements — each lamp lens can be replaced independently, avoiding full assembly replacement for a single damaged lens Wide 435mm bar format — suits the rear panels of trailers, tray bodies, and truck bodies with a prominent, low-profile footprint ADR road approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 125BARWM Lamp Type Stop / Tail / Indicator / Reverse LED Quantity 153 Lamp Count 3 Voltage Range 12V – 24V Dimensions 435mm x 146mm x 31mm Lens Individual replacements Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Weight 0.98 kg Compatible With / Goes Well With Trailers, tray bodies, and trucks requiring wide-format four-function rear combination lighting 12V light vehicles and 24V heavy transport applications Trailer and truck builds requiring ADR-approved stop/tail/indicator/reverse lighting LED Autolamps individual replacement lenses for the 125 series LED Autolamps 125BARRM stop/tail/indicator assembly (same form factor, without reverse) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 125BARWM approved for road use in Australia? Yes. The LED Autolamps 125BARWM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across all four functions. What does individual lens replacement mean for maintenance? Each of the three lamp lens sections can be replaced independently rather than replacing the entire assembly — reducing costs and minimising downtime when a single lens is damaged. How does the 125BARWM differ from the 125BARRM? The 125BARWM adds a reverse function and increases the LED count to 153 across 3 lamps, while the 125BARRM covers stop, tail, and indicator only. Both share the same 435mm x 146mm x 31mm form factor. What is the IP rating on the 125BARWM? The 125BARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 125BARWM carry? The 125BARWM is backed by a 5-year warranty from LED Autolamps. Weight 0.98 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Stop/Tail/Indicator LED Assembly with Individual Lens Replacements IP67, 5-Year Warranty Product Overview The LED Autolamps 125BARRM is a 12/24V rear combination lamp assembly covering stop, tail, and indicator functions in a single surface-mounted bar unit. Measuring 435mm x 146mm x 31mm, it's a wide-format assembly suited to trailers, trucks, and tray bodies where a prominent, low-profile rear lighting solution is required. A key practical advantage is individual lens replacements each lens section can be swapped independently without replacing the entire assembly, reducing maintenance costs and minimising downtime in the field. ADR road approved and rated IP67, the 125BARRM is backed by a 5-year warranty. Features & Benefits Individual lens replacements — each lens section can be replaced independently, avoiding full assembly replacement for a single damaged lens Wide 435mm bar format — suits the rear panels of trailers, tray bodies, and truck bodies with a prominent, low-profile footprint ADR road approved — meets Australian Design Rules for legal on-road use across stop, tail, and indicator functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 125BARRM Lamp Type Stop / Tail / Indicator Voltage Range 12V – 24V Dimensions 435mm x 146mm x 31mm Lens Individual replacements Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Weight 1.02 kg Compatible With / Goes Well With Trailers, tray bodies, and trucks requiring wide-format rear combination lighting 12V light vehicles and 24V heavy transport applications Trailer and truck builds requiring ADR-approved stop/tail/indicator lighting LED Autolamps individual replacement lenses for the 125 series LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 125BARRM approved for road use in Australia? Yes. The LED Autolamps 125BARRM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across stop, tail, and indicator functions. What does individual lens replacement mean for maintenance? Each lens section in the assembly can be replaced independently rather than replacing the entire unit — reducing costs and minimising downtime when a single lens is cracked or damaged. What is the IP rating on the 125BARRM? The 125BARRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. How does the 125BARRM differ from the 125BARML and 125BARMR assemblies? The 125BARRM is a single bar-format assembly at 435mm x 146mm, whereas the 125BARML and 125BARMR are left and right-hand units designed specifically for medium trucks at 340mm x 200mm x 60mm. What warranty does the 125BARRM carry? The 125BARRM is backed by a 5-year warranty from LED Autolamps. Weight 1.02 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 64 LED Square Indicator Lamp with Clip-In Replaceable Lens 5-Year Warranty Product Overview The LED Autolamps 125AM is a 12/24V square rear indicator lamp fitted with 64 LEDs, supplied with a 30cm pre-wired lead for surface mounting on trailers, trucks, caravans, and tray bodies. Measuring 147mm x 147mm x 31mm, it's a larger-format step up from the 100 series, delivering a wider, more prominent amber indicator face for increased rear visibility. The clip-in replaceable lens allows for quick lens swaps without replacing the full housing, keeping maintenance straightforward and cost-effective. ADR approved under CRN33165 and rated IP67, the 125AM is backed by a 5-year warranty. Features & Benefits 64 LEDs — high LED count delivers bright, consistent amber indicator output across a large face for strong rear visibility 147mm square form factor — larger than the 100 series for a more prominent indicator presence on trailers and truck bodies Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and minimising downtime when a lens is damaged ADR road approved — compliant under CRN33165 for legal on-road use as a rear indicator lamp in Australia IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Pre-wired 30cm lead — ready to connect straight out of the pack Surface mount — straightforward installation on trailer and truck body panels 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 125AM Lamp Type Rear Indicator LED Quantity 64 Voltage Range 12V / 24V Dimensions 147mm x 147mm x 31mm Current Draw 0.4A Cable Length 300mm Mounting Surface mount Connector Pre-wired Lens Clip-in replaceable Protection Rating IP67 Compliance ADR — CRN33165 Warranty 5 years Weight 0.3 kg Compatible With / Goes Well With Trailers, caravans, trucks, and tray body applications requiring a larger-format indicator lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear indicator lighting LED Autolamps 125RM stop/tail lamp (same 125 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 125AM approved for road use in Australia? Yes. The 125AM is ADR approved under CRN33165, meeting Australian Design Rules for legal on-road use as a rear indicator lamp. How does the 125AM differ from the 100AM indicator lamp? The 125AM is larger at 147mm x 147mm vs 122mm x 122mm and features 64 LEDs vs 49, delivering a more prominent indicator face and greater output for larger trailer and truck body applications. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing and can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field. What is the IP rating on the 125AM? The 125AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 125AM carry? The 125AM is backed by a 5-year warranty from LED Autolamps. Weight 0.3 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less