Right-Side Under-Seat Amp Install in Your Wrangler JLU Pre-Drilled, Powder-Coated, Lifetime Warranty Product Overview The Stinger JLUAMPBRKTP is the right-hand-side under-seat amplifier mounting bracket designed specifically for the Jeep Wrangler JL Unlimited (4-door) 2018–2022 and Jeep Gladiator JT 2020–2022. Built from 16-gauge corrosion-resistant steel with a powder-coat finish, it secures to the rear legs of the front seat to mount a compatible amplifier cleanly beneath the seat out of sight and protected from the elements. Key Specifications Manufacturer Part Number: JLUAMPBRKTP Side: Right-hand side (RHS) Vehicle compatibility: Jeep Wrangler JL Unlimited 4-door 2018–2022; Jeep Gladiator JT 2020–2022 Construction: 16-gauge corrosion-resistant steel Finish: Corrosion-resistant powder coating Mounting: Secures to rear legs of front seat Pre-drilled: Yes — for select AudioControl, Phoenix Gold, and Stinger amplifiers Custom drilling: Yes — can be drilled for other amplifiers or accessories Supplied hardware: Yes LHS version: JLUAMPBRKTD (sold separately) Warranty: Lifetime Features & Benefits Factory-Matched Jeep-Specific Design — Engineered specifically for the Wrangler JLU and Gladiator JT, securing to the rear seat legs for a clean, stable mount without drilling into the floor or modifying the interior. 16-Gauge Powder-Coated Steel — Heavy-gauge corrosion-resistant steel with a powder-coat finish provides long-term durability against moisture, UV, and the exposure conditions common to open-air Wrangler use. Pre-Drilled and Threaded for Named Amplifiers — Mounting holes are pre-drilled and threaded to directly accept select AudioControl, Phoenix Gold, and Stinger amplifiers, with hardware included for a straightforward installation. Custom Drillable — The bracket can be custom-drilled to suit other aftermarket amplifiers or Jeep accessories not on the confirmed list. Under-Seat Location — Keeps the amplifier out of the cabin's usable space and protected from sun and rain while remaining accessible for maintenance. Left-Hand-Side Companion Available — The JLUAMPBRKTD left-hand-side bracket is available separately for dual-amplifier or split left/right installations. Lifetime Warranty — Backed by Stinger's lifetime warranty. Technical Specs Specification Detail Part Number JLUAMPBRKTP Brand Stinger Side Right-hand side (RHS) Vehicle Compatibility Jeep Wrangler JLU 4-door 2018–2022; Jeep Gladiator JT 2020–2022 Material 16-gauge corrosion-resistant steel Finish Corrosion-resistant powder coating Mounting Location Under front seat — rear seat legs Pre-Drilled Yes — for select amplifiers Hardware Included Yes Custom Drillable Yes LHS Version JLUAMPBRKTD (sold separately) Warranty Lifetime Compatible With / Goes Well With Pre-drilled and confirmed compatible amplifiers: Stinger SPX700X4 Stinger SPX1000X5 Stinger SPX350X2 Phoenix Gold GX1200.6 Phoenix Gold GX800.4 Phoenix Gold GX1200.1 Phoenix Gold MX Series Phoenix Gold Z8 AudioControl ACX-300.4 AudioControl ACX-300.1 AudioControl ACX-600.1 Active Bass Enclosure (as noted by supplier) Vehicle fitment: Jeep Wrangler JL Unlimited (4-door) 2018, 2019, 2020, 2021, 2022 Jeep Gladiator JT 2020, 2021, 2022 Frequently Asked Questions Is the JLUAMPBRKTP for the left or right side? This is the right-hand-side (RHS) bracket. A left-hand-side version (JLUAMPBRKTD) is available separately for dual-amp setups or left-side installations. Does this bracket fit the Jeep Gladiator JT? Yes — the JLUAMPBRKTP is confirmed for the Jeep Gladiator JT from 2020 to 2022 in addition to the Wrangler JLU. Can I use this bracket with an amplifier not on the confirmed list? Yes — the bracket can be custom-drilled to accommodate other aftermarket amplifiers or Jeep accessories. Confirm the physical mounting footprint of your amplifier against the bracket dimensions before drilling. What material is the bracket made from? The JLUAMPBRKTP is constructed from 16-gauge corrosion-resistant steel with a corrosion-resistant powder-coat finish, designed to withstand moisture, UV, and the conditions associated with open-air Wrangler use. Does the bracket come with a warranty? Yes — the JLUAMPBRKTP is backed by Stinger's lifetime warranty. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Clean Under-Seat Amp Install in Your Wrangler JLU Pre-Drilled, Powder-Coated, Lifetime Warranty Product Overview The Stinger JLUAMPBRKTD is a left-hand-side under-seat amplifier mounting bracket designed specifically for the Jeep Wrangler JL Unlimited (4-door) 2018–2022 and Jeep Gladiator JT 2020–2022. Built from 16-gauge corrosion-resistant steel with a powder-coat finish, it secures to the rear legs of the front seat to mount a compatible amplifier cleanly beneath the seat out of sight and protected from the elements. Key Specifications Manufacturer Part Number: JLUAMPBRKTD Side: Left-hand side (LHS) Vehicle compatibility: Jeep Wrangler JL Unlimited 4-door 2018–2022; Jeep Gladiator JT 2020–2022 Construction: 16-gauge corrosion-resistant steel Finish: Corrosion-resistant powder coating Mounting: Secures to rear legs of front seat Pre-drilled: Yes — for select AudioControl, Phoenix Gold, and Stinger amplifiers Custom drilling: Yes — can be drilled for other amplifiers or accessories Supplied hardware: Yes RHS version: JLUAMPBRKTP (sold separately) Warranty: Lifetime Features & Benefits Factory-Matched Jeep-Specific Design — Engineered specifically for the Wrangler JLU and Gladiator JT, securing to the rear seat legs for a clean, stable mount without drilling into the floor or modifying the interior. 16-Gauge Powder-Coated Steel — Heavy-gauge corrosion-resistant steel construction with a powder-coat finish provides long-term durability in the exposed, high-humidity conditions common to Wrangler ownership — including roof-off driving and water exposure. Pre-Drilled and Threaded for Named Amplifiers — Mounting holes are pre-drilled and threaded to directly accept select AudioControl, Phoenix Gold, and Stinger amplifiers (see compatibility list below), with hardware included for a straightforward installation. Custom Drillable — Not on the confirmed list? The bracket can be custom-drilled to suit other aftermarket amplifiers or Jeep accessories, making it a flexible mounting solution beyond the named fitments. Under-Seat Location — Keeps the amplifier out of the cabin's usable space and protected from the sun and rain while remaining accessible for maintenance. Right-Hand-Side Companion Available — The JLUAMPBRKTP right-hand-side bracket is available separately for dual-amplifier or split left/right installations. Lifetime Warranty — Backed by Stinger's lifetime warranty. Technical Specs Specification Detail Part Number JLUAMPBRKTD Brand Stinger Side Left-hand side (LHS) Vehicle Compatibility Jeep Wrangler JLU 4-door 2018–2022; Jeep Gladiator JT 2020–2022 Material 16-gauge corrosion-resistant steel Finish Corrosion-resistant powder coating Mounting Location Under front seat — rear seat legs Pre-Drilled Yes — for select amplifiers Hardware Included Yes Custom Drillable Yes RHS Version JLUAMPBRKTP (sold separately) Warranty Lifetime Compatible With / Goes Well With Pre-drilled and confirmed compatible amplifiers: Stinger SPX700X4 Stinger SPX1000X5 Stinger SPX350X2 Phoenix Gold GX1200.6 Phoenix Gold GX800.4 Phoenix Gold GX1200.1 Phoenix Gold MX Series Phoenix Gold Z8 AudioControl ACX-300.4 AudioControl ACX-300.1 AudioControl ACX-600.1 Active Bass Enclosure (as noted by supplier) Vehicle fitment: Jeep Wrangler JL Unlimited (4-door) 2018, 2019, 2020, 2021, 2022 Jeep Gladiator JT 2020, 2021, 2022 Frequently Asked Questions Is the JLUAMPBRKTD for the left or right side? This is the left-hand-side (LHS) bracket. A right-hand-side version (JLUAMPBRKTP) is available separately for dual-amp setups or right-side installations. Does this bracket fit the Jeep Gladiator JT? Yes — the JLUAMPBRKTD is confirmed for the Jeep Gladiator JT from 2020 to 2022 in addition to the Wrangler JLU. Can I use this bracket with an amplifier not on the confirmed list? Yes — the bracket can be custom-drilled to accommodate other aftermarket amplifiers or Jeep accessories. Confirm the physical mounting footprint of your amplifier against the bracket dimensions before drilling. What material is the bracket made from? The JLUAMPBRKTD is constructed from 16-gauge corrosion-resistant steel with a corrosion-resistant powder-coat finish, designed to withstand moisture, UV, and the harsh conditions associated with open-air Wrangler use. Does the bracket come with a warranty? Yes — the JLUAMPBRKTD is backed by Stinger's lifetime warranty. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Right-Side Under-Seat Amp Install in Your Wrangler JKU Pre-Drilled, Powder-Coated, Lifetime Warranty Product Overview The Stinger JKUAMPBRKTP is the right-hand-side under-seat amplifier mounting bracket designed specifically for the Jeep Wrangler JK Unlimited (4-door) 2007–2018. Built from 16-gauge corrosion-resistant steel with a powder-coat finish, it secures to the rear legs of the front seat to mount a compatible amplifier cleanly beneath the seat — out of sight and protected from the elements. Pre-drilled and threaded mounting holes with supplied hardware support a range of confirmed-compatible amplifiers from AudioControl, Phoenix Gold, and Stinger. The bracket can also be custom-drilled to accommodate other aftermarket amplifiers or Jeep accessories. A left-hand-side version (JKUAMPBRKTD) is available separately. Backed by a lifetime warranty. Key Specifications Manufacturer Part Number: JKUAMPBRKTP Side: Right-hand side (RHS) Vehicle compatibility: Jeep Wrangler JK Unlimited 4-door 2007–2018 Construction: 16-gauge corrosion-resistant steel Finish: Corrosion-resistant powder coating Mounting: Secures to rear legs of front seat Pre-drilled: Yes — for select AudioControl, Phoenix Gold, and Stinger amplifiers Custom drilling: Yes — can be drilled for other amplifiers or accessories Supplied hardware: Yes LHS version: JKUAMPBRKTD (sold separately) Warranty: Lifetime Features & Benefits Factory-Matched Jeep-Specific Design — Engineered specifically for the Wrangler JKU, securing to the rear seat legs for a clean, stable mount without drilling into the floor or modifying the interior. 16-Gauge Powder-Coated Steel — Heavy-gauge corrosion-resistant steel with a powder-coat finish provides long-term durability against moisture, UV, and the exposure conditions common to open-air Wrangler use. Pre-Drilled and Threaded for Named Amplifiers — Mounting holes are pre-drilled and threaded to directly accept select AudioControl, Phoenix Gold, and Stinger amplifiers, with hardware included for a straightforward installation. Custom Drillable — The bracket can be custom-drilled to suit other aftermarket amplifiers or Jeep accessories not on the confirmed list. Under-Seat Location — Keeps the amplifier out of the cabin's usable space and protected from sun and rain while remaining accessible for maintenance. Left-Hand-Side Companion Available — The JKUAMPBRKTD left-hand-side bracket is available separately for dual-amplifier or split left/right installations. Lifetime Warranty — Backed by Stinger's lifetime warranty. Technical Specs Specification Detail Part Number JKUAMPBRKTP Brand Stinger Side Right-hand side (RHS) Vehicle Compatibility Jeep Wrangler JKU 4-door 2007–2018 Material 16-gauge corrosion-resistant steel Finish Corrosion-resistant powder coating Mounting Location Under front seat — rear seat legs Pre-Drilled Yes — for select amplifiers Hardware Included Yes Custom Drillable Yes LHS Version JKUAMPBRKTD (sold separately) Warranty Lifetime Compatible With / Goes Well With Pre-drilled and confirmed compatible amplifiers: Stinger SPX700X4 Stinger SPX1000X5 Stinger SPX350X2 Phoenix Gold GX1200.6 Phoenix Gold GX800.4 Phoenix Gold GX1200.1 Phoenix Gold MX Series Phoenix Gold Z8 AudioControl ACX-300.4 AudioControl ACX-300.1 AudioControl ACX-600.1 Active Bass Enclosure (as noted by supplier) Vehicle fitment: Jeep Wrangler JK Unlimited (4-door) 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Frequently Asked Questions Is the JKUAMPBRKTP for the left or right side? This is the right-hand-side (RHS) bracket. A left-hand-side version (JKUAMPBRKTD) is available separately for dual-amp setups or left-side installations. Does this bracket fit the 2-door Jeep Wrangler JK? The JKUAMPBRKTP is confirmed for the 4-door JK Unlimited (JKU) only. Compatibility with the 2-door JK is not confirmed by the supplier. Can I use this bracket with an amplifier not on the confirmed list? Yes — the bracket can be custom-drilled to accommodate other aftermarket amplifiers or Jeep accessories. Confirm the physical mounting footprint of your amplifier against the bracket dimensions before drilling. What material is the bracket made from? The JKUAMPBRKTP is constructed from 16-gauge corrosion-resistant steel with a corrosion-resistant powder-coat finish, designed to withstand moisture, UV, and the conditions associated with open-air Wrangler use. Does the bracket come with a warranty? Yes — the JKUAMPBRKTP is backed by Stinger's lifetime warranty. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Left-Side Under-Seat Amp Install in Your Wrangler JKU Pre-Drilled, Powder-Coated, Lifetime Warranty Product Overview The Stinger JKUAMPBRKTD is the left-hand-side under-seat amplifier mounting bracket designed specifically for the Jeep Wrangler JK Unlimited (4-door) 2007–2018. Built from 16-gauge corrosion-resistant steel with a powder-coat finish, it secures to the rear legs of the front seat to mount a compatible amplifier cleanly beneath the seat out of sight and protected from the elements. Pre-drilled and threaded mounting holes with supplied hardware support a range of confirmed-compatible amplifiers from AudioControl, Phoenix Gold, and Stinger. The bracket can also be custom-drilled to accommodate other aftermarket amplifiers or Jeep accessories. A right-hand-side version (JKUAMPBRKTP) is available separately. Backed by a lifetime warranty. Key Specifications Manufacturer Part Number: JKUAMPBRKTD Side: Left-hand side (LHS) Vehicle compatibility: Jeep Wrangler JK Unlimited 4-door 2007–2018 Construction: 16-gauge corrosion-resistant steel Finish: Corrosion-resistant powder coating Mounting: Secures to rear legs of front seat Pre-drilled: Yes — for select AudioControl, Phoenix Gold, and Stinger amplifiers Custom drilling: Yes — can be drilled for other amplifiers or accessories Supplied hardware: Yes RHS version: JKUAMPBRKTP (sold separately) Warranty: Lifetime Features & Benefits Factory-Matched Jeep-Specific Design — Engineered specifically for the Wrangler JKU, securing to the rear seat legs for a clean, stable mount without drilling into the floor or modifying the interior. 16-Gauge Powder-Coated Steel — Heavy-gauge corrosion-resistant steel with a powder-coat finish provides long-term durability against moisture, UV, and the exposure conditions common to open-air Wrangler use. Pre-Drilled and Threaded for Named Amplifiers — Mounting holes are pre-drilled and threaded to directly accept select AudioControl, Phoenix Gold, and Stinger amplifiers, with hardware included for a straightforward installation. Custom Drillable — The bracket can be custom-drilled to suit other aftermarket amplifiers or Jeep accessories not on the confirmed list. Under-Seat Location — Keeps the amplifier out of the cabin's usable space and protected from sun and rain while remaining accessible for maintenance. Right-Hand-Side Companion Available — The JKUAMPBRKTP right-hand-side bracket is available separately for dual-amplifier or split left/right installations. Lifetime Warranty — Backed by Stinger's lifetime warranty. Technical Specs Specification Detail Part Number JKUAMPBRKTD Brand Stinger Side Left-hand side (LHS) Vehicle Compatibility Jeep Wrangler JKU 4-door 2007–2018 Material 16-gauge corrosion-resistant steel Finish Corrosion-resistant powder coating Mounting Location Under front seat — rear seat legs Pre-Drilled Yes — for select amplifiers Hardware Included Yes Custom Drillable Yes RHS Version JKUAMPBRKTP (sold separately) Warranty Lifetime Compatible With / Goes Well With Pre-drilled and confirmed compatible amplifiers: Stinger SPX700X4 Stinger SPX1000X5 Stinger SPX350X2 Phoenix Gold GX1200.6 Phoenix Gold GX800.4 Phoenix Gold GX1200.1 Phoenix Gold MX Series Phoenix Gold Z8 AudioControl ACX-300.4 AudioControl ACX-300.1 AudioControl ACX-600.1 Active Bass Enclosure (as noted by supplier) Vehicle fitment: Jeep Wrangler JK Unlimited (4-door) 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Frequently Asked Questions Is the JKUAMPBRKTD for the left or right side? This is the left-hand-side (LHS) bracket. A right-hand-side version (JKUAMPBRKTP) is available separately for dual-amp setups or right-side installations. Does this bracket fit the 2-door Jeep Wrangler JK? The JKUAMPBRKTD is confirmed for the 4-door JK Unlimited (JKU) only. Compatibility with the 2-door JK is not confirmed by the supplier. Can I use this bracket with an amplifier not on the confirmed list? Yes — the bracket can be custom-drilled to accommodate other aftermarket amplifiers or Jeep accessories. Confirm the physical mounting footprint of your amplifier against the bracket dimensions before drilling. What material is the bracket made from? The JKUAMPBRKTD is constructed from 16-gauge corrosion-resistant steel with a corrosion-resistant powder-coat finish, designed to withstand moisture, UV, and the conditions associated with open-air Wrangler use. Does the bracket come with a warranty? Yes — the JKUAMPBRKTD is backed by Stinger's lifetime warranty. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger IPUSBD6 InstallPRO Dual USB Flush Mount Extension Kit, 6ft / 1.8m Relocate your aftermarket head unit's dual USB ports to a convenient flush-mount location glovebox, dash, roof console, trim panel, or anywhere else with a clean 6-foot extension harness and waterproof dust cap included. Product Overview The Stinger IPUSBD6 is a dual USB 2.0 flush mount extension kit designed to remote-mount the USB inputs from an aftermarket infotainment system or head unit to a more accessible location in the vehicle. With a 6-foot (1.8m) harness, the USB sockets can be neatly positioned in a glovebox, dashboard, roof console, trim panel, or any other suitable location without loose cables floating around the centre console. The kit includes a waterproof dust cap to protect the sockets when not in use and a locking ring to secure the flush mount panel. While designed primarily for vehicle installations, the IPUSBD6 works equally well in caravans, boats, and other fixed or semi-fixed applications. Features & Benefits Dual USB 2.0 flush mount extension — remote mounts head unit USB ports 6ft (1.8m) high-quality harness length Waterproof dust cap included — protects sockets when not in use Locking ring included for secure panel mounting Installs into glovebox, dashboard, roof console, or trim panels Suitable for vehicles, caravans, boats, and other applications Compatible with most aftermarket head units featuring dual USB inputs Technical Specs Specification Detail SKU / Part Number IPUSBD6 Brand Stinger Series InstallPRO Cable Length 6ft (1.8m) USB Standard USB 2.0 Channels Dual USB Includes Dual USB 2.0 Extension Harness, Waterproof Dust Cap, Locking Ring Compatible With / Goes Well With Direct Vehicle Fit: Universal — compatible with any aftermarket head unit or infotainment system with dual USB inputs Goes Well With: Aftermarket double DIN head units with rear dual USB inputs (Pioneer, Kenwood, Sony, JVC, Stinger) Stinger HEIGH10 UN1810 infotainment system (dual rear USB inputs) Stinger SRP-JW07H and SRP-RAM13H infotainment kits (dual rear USB) Caravans, boats, and fixed installations requiring remote USB access Frequently Asked Questions Will this kit work with any aftermarket head unit? Yes. The IPUSBD6 is a standard USB 2.0 extension harness compatible with any head unit or infotainment system that features dual USB ports. It simply extends those ports to a flush-mounted location of your choice. Can I mount the USB sockets into my dashboard or glovebox? Yes. The flush mount panel is designed to be installed into any flat surface — dashboard, glovebox lid, roof console, trim panels, or centre console. A locking ring secures the panel in place once the cutout is made. Is this kit waterproof? The kit includes a waterproof dust cap to protect the USB sockets when not in use. This makes it suitable for installations in caravans and boats where occasional moisture exposure is possible, though the sockets themselves are standard USB 2.0 and should not be exposed to direct water ingress while a device is connected. Does the 6-foot cable length give enough reach for most installations? For most vehicle installations — including runs from the head unit behind the dash to a glovebox or centre console — 6 feet (1.8m) provides adequate reach. For longer runs (e.g. roof consoles in larger vehicles or caravans), confirm the required distance before purchasing. Can this be used outside the vehicle? Yes. While designed primarily for automotive use, the IPUSBD6 can be used in any application requiring a flush-mounted dual USB extension, including caravans, boats, home entertainment units, and computer desks. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger HRVW001 Complete Plug & Play Radio Replacement Kit for Volkswagen (2005–2015) Everything needed to replace your factory VW head unit in one kit SWC retention, CAN bus outputs, factory amplifier retention, Fakra antenna adaptor, dash fascia, and ConnectPRO interface. Head unit not included. Product Overview The Stinger HRVW001 is a complete, all-in-one radio replacement kit for select Volkswagen models (2005–2015). It bundles every component required for a professional aftermarket head unit installation including the ConnectPRO SWI-VW02 plug-and-play interface, Metra MT99-9011 black single/double DIN dash fascia, ST27AA25 dual diversity Fakra antenna adaptor, vehicle harness, and installation manuals. The SWI-VW02 interface connects to the vehicle's CAN bus to convert factory commands to analogue outputs, retaining steering wheel audio controls (customisable) and providing 12V accessory, reverse trigger, park brake, tachometer, speed signal (VSS), and illumination outputs. The factory basic amplified audio system is also retained. Please note: The Dynaudio digital amplified system is not retained — standard/basic factory amplified system only CAN bus output functionality is only available if the feature is present on the vehicle's network Head unit is not included Features & Benefits Complete all-in-one installation kit — no additional components required Plug & play — factory connector to standard ISO Retains factory steering wheel audio controls (customisable) Retains factory basic amplified audio system CAN bus to analogue conversion: 12V accessory, reverse trigger, park brake, tach, VSS, illumination outputs Includes Metra MT99-9011 single/double DIN dash fascia — 1DIN and 2DIN compatible Includes ST27AA25 dual diversity Fakra antenna adaptor Mounting brackets included — no additional holes required Black finish AUX/USB retention not included Technical Specs Specification Detail SKU / Part Number HRVW001 Brand Stinger Plug & Play Yes — Factory Connector to Standard ISO Steering Wheel Control Retention Yes — customisable Factory Amplifier Retention Yes — basic amplified system only (Dynaudio not retained) CAN Bus Outputs 12V ACC, Reverse Trigger, Park Brake, Tach, VSS, Illumination AUX / USB Retention No Antenna Adaptor Included Yes — ST27AA25 Dual Diversity Fakra Mounting Brackets Included Yes Dash Fascia Included Yes — Metra MT99-9011 Black 1DIN/2DIN Interface Module SWI-VW02 ConnectPRO Plug & Play Interface What's in the Box MT99-9011 Dash Fascia, ST27AA25 Antenna Adaptor, SWI-VW02 Interface, Vehicle Harness, Installation Manuals Compatible With / Goes Well With Direct Vehicle Fit: Volkswagen Amarok 2011–2015 (2H Series) Volkswagen EOS 2005–2013 (1F) Volkswagen Golf (incl. GTI) 2005–2013 (Mk5/Mk6 — 5K Series) Volkswagen Jetta 2005–2015 (A5/A6 Series) Volkswagen Passat 2005–2014 (B6/B7 Series) Volkswagen Transporter (incl. Multivan & Caravelle) 2010–2015 (T5 Series) Goes Well With: Aftermarket single DIN or double DIN head units (Pioneer, Kenwood, Sony, JVC, Stinger) Stinger SCVWRT1 reverse camera retention adaptor (for compatible VW models) Frequently Asked Questions Does this kit retain the Dynaudio sound system? No. The HRVW001 retains the basic factory amplified audio system only. The Dynaudio digital amplified system is not retained. If your VW is fitted with Dynaudio, this kit is not suitable for maintaining your factory audio quality — contact the F.A.E. team to discuss alternative solutions. Are steering wheel controls fully retained and customisable? Yes. The SWI-VW02 ConnectPRO interface retains factory steering wheel audio controls with customisable button mapping — allowing you to adjust which button controls which head unit function to suit your installation. Does this kit include a head unit? No. The HRVW001 is a radio replacement kit — it includes everything needed to install an aftermarket head unit, but the head unit itself must be purchased separately. Is AUX or USB retention included? No. AUX and USB retention are not included with the HRVW001. If you need to retain factory AUX/USB ports, an additional retention module will be required. Does this kit work with all VW Golf and Jetta variants in the listed years? The HRVW001 is confirmed for the Golf Mk5/Mk6 (5K, 2005–2013) and Jetta A5/A6 (2005–2015). For specific trim level confirmation or to verify Dynaudio vs standard audio system fitment, contact the F.A.E. team before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger HRTY010 Plug & Play Radio Replacement Kit for Toyota Estima XR50 (Amplified / HD Audio / DSP) The amplified-system counterpart to the HRTY009 built specifically for Toyota Estima XR50 models with the factory HD audio package or DSP amplified system, with full factory amplifier and reverse camera retention. Product Overview The Stinger HRTY010 is a vehicle-specific radio replacement kit for the Toyota Estima XR50 series (2006–2016) fitted with a factory amplified audio system also known as the HD Audio Package or DSP Audio System. It is not compatible with non-amplified Estima variants (see HRTY009 for those models). The kit connects via Toyota 20-pin and 24-pin connectors to a standard ISO harness, and includes factory amplifier retention and reverse camera retention modules alongside the OEM-grade fascia panel and steering wheel control adaptor. The fascia supports both 2DIN radio installation (with included adaptors) and 200mm single DIN radios. To confirm if your Estima has the amplified system: look for the DSP icon in the bottom left corner of the OE screen when it is in CD, Radio, or Mini Disc mode. If the DSP icon is present, the HRTY010 is the correct kit for your vehicle. Please note: The following factory features cannot be retained when replacing the factory radio Parking Assist system, optional side and front-facing cameras, and optional roof mount screen. Reverse camera (rear only) is retained. Features & Benefits Plug & play — factory connector to standard ISO connector Retains factory amplifier — retention module included Retains factory reverse camera (rear only) — retention module included Retains steering wheel audio controls — adaptor included OEM-grade replacement radio panel — suits 2DIN or 200mm radios Toyota 20-pin and 24-pin connector compatibility Silver finish to match Estima interior Uses factory mounting brackets — no additional brackets required Technical Specs Specification Detail SKU / Part Number HRTY010 Brand Stinger Colour / Finish Silver Plug & Play Yes — Factory Connector to Standard ISO Connector Vehicle Plug Style 20-Pin Toyota Style Connector, 24-Pin Toyota Style Connector Compatible Audio System Amplified only — HD Audio Package / DSP Audio System Steering Wheel Control Retention Yes — Adaptor included Factory Amplifier Retention Yes — Retention module included Reverse Camera Retention Yes — Rear camera only (side and front cameras not retained) Parking Assist Retention No — Not retained Roof Mount Screen Retention No — Not retained AUX / USB Retention No Antenna Adaptor Included No Mounting Brackets Included No — Uses factory brackets Radio Size Compatibility 2DIN (with included adaptors) or 200mm What's in the Box OEM-Grade 2DIN Radio Panel, Steering Wheel Audio Buttons Adaptor, Factory Amplifier Retention, Factory Reverse Camera Retention Compatible With / Goes Well With Direct Vehicle Fit: Toyota Estima 2006–2016 (XR50 Series) — HD Audio / DSP amplified models only Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Aftermarket 200mm single DIN head units Aftermarket antenna adaptor (not included — may be required depending on head unit) Frequently Asked Questions How do I confirm my Estima has the amplified HD audio system? Look for the DSP icon in the bottom left corner of the OE screen while it is displaying CD, Radio, or Mini Disc mode. If the DSP icon is visible, your vehicle has the amplified system and the HRTY010 is the correct kit. If no DSP icon is present, your vehicle has a non-amplified system — see the HRTY009 instead. What happens to my factory amplifier after installing an aftermarket radio? The HRTY010 includes a factory amplifier retention module that keeps your factory amplifier active and functioning with your new aftermarket head unit. Will my factory reverse camera still work after installation? Yes, but only the rear reverse camera is retained. Optional side-facing and front-facing cameras are not retained. The optional roof mount screen also cannot be retained after replacing the factory radio. What happens to the Parking Assist system after installation? The factory Parking Assist system cannot be retained when the factory radio is replaced using the HRTY010. This applies to all compatible Estima XR50 variants regardless of trim level. Does this kit fit both 2DIN and 200mm radios? Yes. The OEM-grade fascia panel supports standard 2DIN radio installation using the included adaptors, as well as 200mm single DIN radios, giving you flexibility in your choice of aftermarket head unit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger HRTY008 Plug & Play Radio Replacement Kit for Toyota Hilux 2015–2020 Upgrade your AN120/AN130 Hilux head unit with full SWC retention, USB carry-over, and advanced short/long press button mapping complete kit, ready to install. Product Overview The Stinger HRTY008 is a vehicle-specific radio replacement kit engineered for the Toyota Hilux AN120/AN130 series (2015–2020). It connects your new aftermarket head unit directly to the factory wiring via a plug-and-play ISO harness, with mounting brackets, antenna adaptor, and USB retention all included for a complete installation. The kit features Stinger's advanced SWC interface with dual-function button assignment (short press / long press), CAN Bus accessory output, and three configuration methods: PC via the Autoleads application, dip switch, or manual programming. A tri-colour LED provides real-time module status and memory is retained even if power is lost. Features & Benefits Plug & play — factory connector to standard ISO connector Retains steering wheel audio controls Dual-function SWC assignment — two radio functions per button (short press / long press) Configurable via PC (Autoleads app), dip switch, or manual programming Manual learning function for compatibility with unlisted analogue SWC vehicles Factory USB retention included Provides accessory output in CAN Bus vehicles Tri-colour LED status indicator Retains memory even if power is lost Updatable via Autoleads PC Application Antenna adaptor included Mounting brackets included Black finish Technical Specs Specification Detail SKU / Part Number HRTY008 Brand Stinger Colour / Finish Black Plug & Play Yes — Factory Connector to Standard ISO Connector Steering Wheel Control Retention Yes Dual-Function SWC Mapping Yes — Short Press / Long Press per button SWC Programming Options PC (Autoleads App), Dip Switch, Manual CAN Bus Accessory Output Yes USB Retention Yes AUX Retention No Reverse Camera Retention Not specified — confirm with F.A.E. Memory Retention (power loss) Yes Field Updatable Yes — via Autoleads PC Application Antenna Adaptor Included Yes Mounting Brackets Included Yes What's in the Box 2DIN Radio Panel, Steering Wheel Audio Buttons Adaptor, Antenna Adaptor, USB Retention Compatible With / Goes Well With Direct Vehicle Fit: Toyota Hilux 2015–2020 (AN120/AN130 Series) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Autoleads PC Application (for advanced SWC programming and firmware updates) Aftermarket reverse camera module (if reverse camera retention is required) Frequently Asked Questions Is USB retention included, and what about AUX? Yes, factory USB retention is included in the box. AUX retention is not included — an additional product would be required if AUX connectivity is needed. Can I assign multiple functions to one steering wheel button? Yes. The HRTY008 supports dual-function mapping, allowing two separate radio functions to be assigned to a single steering wheel button via short press and long press inputs. How do I configure or update the steering wheel control interface? The SWC interface supports three configuration methods: PC via the Autoleads application, dip switch settings, or manual programming on the module. Firmware updates are applied through the Autoleads PC Application. Does this kit retain the factory reverse camera? Reverse camera retention is not specified in the supplier data for the HRTY008. Contact the F.A.E. team to confirm before purchasing if reverse camera retention is required for your installation. Is this kit compatible with all 2015–2020 Toyota Hilux variants? The HRTY008 is specified for the Toyota Hilux AN120/AN130 series (2015–2020). For confirmation of compatibility with your specific variant or factory audio configuration, contact the F.A.E. team before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger HRTY007 Plug & Play Radio Replacement Kit for Toyota Hilux 2013–2015 Upgrade your Toyota Hilux head unit with full steering wheel control retention, reverse camera support, and advanced short/long press button mapping all in one kit. Product Overview The Stinger HRTY007 is a vehicle-specific radio replacement kit built for the Toyota Hilux AN10/AN20/AN30 series (2013–2015). It delivers a true plug-and-play installation via a factory connector to standard ISO connector harness, with mounting brackets and an antenna adaptor included for a complete install. The kit features Stinger's advanced SWC interface with dual-function button assignment (short press / long press), CAN Bus accessory output, and three configuration methods: PC via the Autoleads application, dip switch, or manual programming. Reverse camera retention is also supported provided the vehicle has reverse camera wiring present in the 28-pin plug. Please note: Reverse camera retention is only available on vehicles with reverse camera wiring in the 28-pin plug. If your Hilux does not have this wiring, reverse camera retention will not be possible with this kit. Features & Benefits Plug & play — factory connector to standard ISO connector Retains steering wheel audio controls (20-pin SWC connection) Dual-function SWC assignment — two radio functions per button (short press / long press) Configurable via PC (Autoleads app), dip switch, or manual programming Manual learning function for compatibility with unlisted analogue SWC vehicles Reverse camera retention — for vehicles with camera wiring in 28-pin plug only Provides accessory output in CAN Bus vehicles Tri-colour LED status indicator Retains memory even if power is lost Updatable via Autoleads PC Application Antenna adaptor included Mounting brackets included Black finish Technical Specs Specification Detail SKU / Part Number HRTY007 Brand Stinger Colour / Finish Black Plug & Play Yes — Factory Connector to Standard ISO Connector SWC Connection Type Toyota 20-Pin SWC Steering Wheel Control Retention Yes Dual-Function SWC Mapping Yes — Short Press / Long Press per button SWC Programming Options PC (Autoleads App), Dip Switch, Manual CAN Bus Accessory Output Yes Reverse Camera Retention Yes — 28-pin plug with camera wiring only Memory Retention (power loss) Yes Field Updatable Yes — via Autoleads PC Application Antenna Adaptor Included Yes Mounting Brackets Included Yes What's in the Box 2DIN Radio Panel, Steering Wheel Audio Buttons Adaptor, Antenna Adaptor Compatible With / Goes Well With Direct Vehicle Fit: Toyota Hilux 2013–2015 (AN10/AN20/AN30 Series) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Autoleads PC Application (for advanced SWC programming and firmware updates) Aftermarket reverse camera (if upgrading factory camera or adding new camera) Frequently Asked Questions Will this kit retain my factory reverse camera? Reverse camera retention is supported, but only on vehicles where reverse camera wiring is present in the 28-pin plug. If your Hilux does not have this wiring pre-installed, reverse camera retention will not be available with this kit. Can I assign multiple functions to one steering wheel button? Yes. The HRTY007 supports dual-function mapping, allowing two separate radio functions to be assigned to a single steering wheel button via short press and long press inputs. How do I configure or update the steering wheel control interface? The SWC interface supports three configuration methods: PC via the Autoleads application, dip switch settings, or manual programming on the module. Firmware updates are applied through the Autoleads PC Application. Is this kit compatible with all 2013–2015 Toyota Hilux variants? The HRTY007 is specified for the Toyota Hilux AN10/AN20/AN30 series (2013–2015). For confirmation of compatibility with your specific variant or factory audio configuration, contact the F.A.E. team before purchasing. Does this kit include an antenna adaptor and mounting brackets? Yes. Both an antenna adaptor and mounting brackets are included in the box alongside the 2DIN radio panel and steering wheel audio buttons adaptor. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Tailored Radio Upgrade for the Toyota Camry XV70 200mm or 2DIN, SWC and Camera Retained Product Overview The Stinger HRTY006 is a radio replacement kit designed specifically for the Toyota Camry XV70 series (2018–2020), supporting installation of either a Toyota-style 200mm wide head unit or a standard 2DIN unit. The kit includes an OEM-grade dash panel and clock assembly to maintain the factory look of the Camry's interior, along with a full Axxess vehicle-to-bare-wire harness with camera retention and the SWI-RC-1 steering wheel control interface. The SWI-RC-1 is a highly capable SWC module: it supports DIP switch or manual button programming, retains its configuration on power loss, offers dual press function (two actions per steering wheel button), and is compatible with analogue, CAN, LAN, LIN, KBUS, Class II, and Serial Data steering wheel control systems. It is also supported by Apple, Android, and PC applications for configuration. Note that this kit is designed for Toyota vehicles with a 20-pin SWC connection confirm your Camry's SWC connector before ordering. Features & Benefits 200mm Toyota-style and 2DIN compatible: Accepts both the wider Toyota 200mm format head units and standard 2DIN units — giving you the broadest choice of compatible aftermarket radios for the XV70 Camry. OEM-grade dash panel and clock assembly: Stinger's Toyota OEM-grade fascia and clock assembly maintain the factory finish of the Camry interior, keeping the upgrade looking factory-intentional. Camera retention harness: The Axxess vehicle-to-bare-wire harness includes camera retention, so the factory reverse camera continues to function with the new head unit. SWI-RC-1 advanced SWC interface: Supports dual press function (two actions per button), DIP switch or manual programming, power-loss memory retention, and compatibility with a vast range of SWC bus types including analogue, CAN, LAN, LIN, KBUS, and more. App-supported configuration: The SWI-RC-1 can be configured via Apple, Android, or PC applications for precise control over button assignments. Tri-colour LED status indicator: Provides real-time feedback on module power, button presses, and fault conditions — useful during installation and fault-finding. 3.5mm patch lead included: Supplies an auxiliary audio patch lead for connecting audio sources where required by the chosen head unit. Mounting brackets and Toyota 200mm adaptors included: All hardware needed to mount either a 200mm or 2DIN head unit in the Camry is supplied. Technical Specs Specification Detail Part Number HRTY006 Kit Type 200mm Toyota-style / 2DIN Radio Replacement Kit Colour Black Plug & Play Yes — Axxess vehicle to bare wire harness Steering Wheel Controls Retained — SWI-RC-1 interface included SWC Bus Compatibility Analogue, CAN, LAN, LIN, KBUS, Class II, Serial Data SWC Connector Required Toyota 20-pin SWC connection Dual Press Function Yes — two actions per steering wheel button Memory Retention Yes — retained on power loss App Support Apple, Android, PC Tri-colour LED Yes — power, button press, and fault indication Camera Retention Yes — included in Axxess harness Antenna Adaptor Not specified — confirm with supplier Mounting Brackets Yes — included Toyota 200mm Adaptors Yes — included 3.5mm Patch Lead Yes — included Compatible Model Toyota Camry XV70 Series (2018–2020) Includes OEM-grade dash panel, clock assembly, SWI-RC-1, Axxess harness, 200mm adaptors, mounting brackets, 3.5mm patch lead, wiring instructions Weight Not specified Compatible With / Goes Well With Toyota Camry XV70 Series — 2018 to 2020 Toyota 200mm wide aftermarket head units Standard 2DIN aftermarket head units Toyota vehicles with 20-pin SWC connection Caution: This kit requires a Toyota 20-pin SWC connection — confirm your Camry's SWC connector type before ordering. An antenna adaptor is not listed in the supplied specifications — confirm with F.A.E. whether one is required for your chosen head unit. Frequently Asked Questions What is the difference between a Toyota 200mm head unit and a standard 2DIN unit? Toyota 200mm head units are wider than a standard 2DIN unit — measuring approximately 200mm across rather than the standard 178mm DIN width. The HRTY006 includes adaptors for both formats, so you can choose either a Toyota-style 200mm unit (for a more factory-matched look) or a standard 2DIN unit. Does this kit include everything needed for installation? The HRTY006 includes the OEM-grade dash panel, clock assembly, SWI-RC-1 SWC interface, Axxess vehicle harness with camera retention, Toyota 200mm adaptors, mounting brackets, 3.5mm patch lead, and wiring instructions. An antenna adaptor is not confirmed as included — verify with F.A.E. before ordering, and note that the head unit ISO wiring harness is not included and must be sourced separately. Will my steering wheel audio buttons work with any aftermarket head unit? The SWI-RC-1 is broadly compatible across thousands of vehicles and head unit brands, but SWC compatibility can vary. Configure the interface via the app or DIP switches to match your head unit's SWC input protocol. Contact F.A.E. if you have a specific head unit in mind and want to confirm compatibility before purchasing. What is dual press function and how does it work? Dual press function allows you to assign two different radio commands to a single steering wheel button — one action for a short press and a different action for a long press. This effectively doubles the number of controllable functions available from your steering wheel without requiring additional buttons. Is the HRTY006 covered under warranty? Stinger products sold through F.A.E. are covered under the manufacturer's warranty. Contact F.A.E. directly for warranty claims, SWC programming support, or fitment questions after purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger HRTY002 Plug & Play Radio Replacement Kit for Toyota Camry & Aurion XV40 Upgrade your Toyota Camry or Aurion head unit without losing a single steering wheel button dual-function short/long press mapping included. Product Overview The Stinger HRTY002 is a vehicle-specific radio replacement kit for the Toyota Camry XV40 (2007–2011) and Toyota Aurion XV40 (2006–2011), both equipped with a 20-pin steering wheel control connection. It delivers a true plug-and-play installation via a factory connector to standard ISO connector harness with no cutting or splicing required. The HRTY002 features the same advanced SWC interface found across Stinger's Toyota range supporting dual-function button assignment (short press / long press), CAN Bus accessory output, and three configuration methods: PC via the Autoleads application, dip switch, or manual programming. A tri-colour LED provides real-time module status, and memory is retained even if power is lost. Features & Benefits Plug & play — factory connector to standard ISO connector Retains steering wheel audio controls (20-pin SWC connection) Dual-function SWC assignment — two radio functions per button (short press / long press) Configurable via PC (Autoleads app), dip switch, or manual programming Manual learning function for compatibility with unlisted analogue SWC vehicles Provides accessory output in CAN Bus vehicles Tri-colour LED status indicator Retains memory even if power is lost Updatable via Autoleads PC Application Technical Specs Specification Detail SKU / Part Number HRTY002 Brand Stinger Colour / Finish Black Plug & Play Yes — Factory Connector to Standard ISO Connector SWC Connection Type Toyota 20-Pin SWC Steering Wheel Control Retention Yes Dual-Function SWC Mapping Yes — Short Press / Long Press per button SWC Programming Options PC (Autoleads App), Dip Switch, Manual CAN Bus Accessory Output Yes Memory Retention (power loss) Yes Field Updatable Yes — via Autoleads PC Application Antenna Adaptor Included Not specified — confirm with F.A.E. AUX / USB Retention Not specified — confirm with F.A.E. What's in the Box 2DIN Radio Panel, Steering Wheel Audio Buttons Adaptor Compatible With / Goes Well With Direct Vehicle Fit: Toyota Aurion 2006–2011 (XV40 Series) Toyota Camry 2007–2011 (XV40 Series) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Autoleads PC Application (for advanced SWC programming and firmware updates) Aftermarket reverse camera module (if reverse camera retention is required) Frequently Asked Questions Does this kit fit both the Toyota Camry and Aurion? Yes. The HRTY002 is compatible with both the Toyota Camry XV40 (2007–2011) and the Toyota Aurion XV40 (2006–2011), as both models share the same 20-pin SWC connection and factory wiring configuration. Can I assign multiple functions to one steering wheel button? Yes. The HRTY002 supports dual-function mapping, allowing two separate radio functions to be assigned to a single steering wheel button using short press and long press inputs. How do I configure or update the steering wheel control interface? The SWC interface supports three configuration methods: PC via the Autoleads application, dip switch settings, or manual programming directly on the module. Firmware updates are applied through the Autoleads PC Application. Does this kit work with CAN Bus vehicles? Yes. The HRTY002 provides an accessory output for CAN Bus vehicles, ensuring your aftermarket head unit receives the correct accessory trigger signal from the factory wiring. Is an antenna adaptor included with this kit? The supplier data does not confirm whether an antenna adaptor is included with the HRTY002. Contact the F.A.E. team to confirm before purchasing if an antenna adaptor is required for your installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less